blob: 9565acf1aa729d888d99f347eee5956436bd4960 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * Workbit NinjaSCSI-32Bi/UDE PCI/CardBus SCSI Host Bus Adapter driver
3 * Basic data header
4 *
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License as published by
7 * the Free Software Foundation; either version 2, or (at your option)
8 * any later version.
9 *
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
14*/
15
16#ifndef _NSP32_H
17#define _NSP32_H
18
Linus Torvalds1da177e2005-04-16 15:20:36 -070019//#define NSP32_DEBUG 9
20
21/*
22 * VENDOR/DEVICE ID
23 */
24#define PCI_VENDOR_ID_IODATA 0x10fc
25#define PCI_VENDOR_ID_WORKBIT 0x1145
26
27#define PCI_DEVICE_ID_NINJASCSI_32BI_CBSC_II 0x0005
28#define PCI_DEVICE_ID_NINJASCSI_32BI_KME 0xf007
29#define PCI_DEVICE_ID_NINJASCSI_32BI_WBT 0x8007
30#define PCI_DEVICE_ID_WORKBIT_STANDARD 0xf010
31#define PCI_DEVICE_ID_WORKBIT_DUALEDGE 0xf011
32#define PCI_DEVICE_ID_NINJASCSI_32BI_LOGITEC 0xf012
33#define PCI_DEVICE_ID_NINJASCSI_32BIB_LOGITEC 0xf013
34#define PCI_DEVICE_ID_NINJASCSI_32UDE_MELCO 0xf015
35#define PCI_DEVICE_ID_NINJASCSI_32UDE_MELCO_II 0x8009
36
37/*
38 * MODEL
39 */
40enum {
41 MODEL_IODATA = 0,
42 MODEL_KME = 1,
43 MODEL_WORKBIT = 2,
44 MODEL_LOGITEC = 3,
45 MODEL_PCI_WORKBIT = 4,
46 MODEL_PCI_LOGITEC = 5,
47 MODEL_PCI_MELCO = 6,
48};
49
50static char * nsp32_model[] = {
51 "I-O DATA CBSC-II CardBus card",
52 "KME SCSI CardBus card",
53 "Workbit duo SCSI CardBus card",
54 "Logitec CardBus card with external ROM",
55 "Workbit / I-O DATA PCI card",
56 "Logitec PCI card with external ROM",
57 "Melco CardBus/PCI card with external ROM",
58};
59
60
61/*
62 * SCSI Generic Definitions
63 */
64#define EXTENDED_SDTR_LEN 0x03
65
66/* Little Endian */
67typedef u32 u32_le;
68typedef u16 u16_le;
69
70/*
Linus Torvalds1da177e2005-04-16 15:20:36 -070071 * BASIC Definitions
72 */
73#ifndef TRUE
74# define TRUE 1
75#endif
76#ifndef FALSE
77# define FALSE 0
78#endif
79#define ASSERT 1
80#define NEGATE 0
81
82
83/*******************/
84/* normal register */
85/*******************/
86/*
87 * Don't access below register with Double Word:
88 * +00, +04, +08, +0c, +64, +80, +84, +88, +90, +c4, +c8, +cc, +d0.
89 */
90#define IRQ_CONTROL 0x00 /* BASE+00, W, W */
91#define IRQ_STATUS 0x00 /* BASE+00, W, R */
92# define IRQSTATUS_LATCHED_MSG BIT(0)
93# define IRQSTATUS_LATCHED_IO BIT(1)
94# define IRQSTATUS_LATCHED_CD BIT(2)
95# define IRQSTATUS_LATCHED_BUS_FREE BIT(3)
96# define IRQSTATUS_RESELECT_OCCUER BIT(4)
97# define IRQSTATUS_PHASE_CHANGE_IRQ BIT(5)
98# define IRQSTATUS_SCSIRESET_IRQ BIT(6)
99# define IRQSTATUS_TIMER_IRQ BIT(7)
100# define IRQSTATUS_FIFO_SHLD_IRQ BIT(8)
101# define IRQSTATUS_PCI_IRQ BIT(9)
102# define IRQSTATUS_BMCNTERR_IRQ BIT(10)
103# define IRQSTATUS_AUTOSCSI_IRQ BIT(11)
104# define PCI_IRQ_MASK BIT(12)
105# define TIMER_IRQ_MASK BIT(13)
106# define FIFO_IRQ_MASK BIT(14)
107# define SCSI_IRQ_MASK BIT(15)
108# define IRQ_CONTROL_ALL_IRQ_MASK (PCI_IRQ_MASK | \
109 TIMER_IRQ_MASK | \
110 FIFO_IRQ_MASK | \
111 SCSI_IRQ_MASK )
112# define IRQSTATUS_ANY_IRQ (IRQSTATUS_RESELECT_OCCUER | \
113 IRQSTATUS_PHASE_CHANGE_IRQ | \
114 IRQSTATUS_SCSIRESET_IRQ | \
115 IRQSTATUS_TIMER_IRQ | \
116 IRQSTATUS_FIFO_SHLD_IRQ | \
117 IRQSTATUS_PCI_IRQ | \
118 IRQSTATUS_BMCNTERR_IRQ | \
119 IRQSTATUS_AUTOSCSI_IRQ )
120
121#define TRANSFER_CONTROL 0x02 /* BASE+02, W, W */
122#define TRANSFER_STATUS 0x02 /* BASE+02, W, R */
123# define CB_MMIO_MODE BIT(0)
124# define CB_IO_MODE BIT(1)
125# define BM_TEST BIT(2)
126# define BM_TEST_DIR BIT(3)
127# define DUAL_EDGE_ENABLE BIT(4)
128# define NO_TRANSFER_TO_HOST BIT(5)
129# define TRANSFER_GO BIT(7)
130# define BLIEND_MODE BIT(8)
131# define BM_START BIT(9)
132# define ADVANCED_BM_WRITE BIT(10)
133# define BM_SINGLE_MODE BIT(11)
134# define FIFO_TRUE_FULL BIT(12)
135# define FIFO_TRUE_EMPTY BIT(13)
136# define ALL_COUNTER_CLR BIT(14)
137# define FIFOTEST BIT(15)
138
139#define INDEX_REG 0x04 /* BASE+04, Byte(R/W), Word(R) */
140
141#define TIMER_SET 0x06 /* BASE+06, W, R/W */
142# define TIMER_CNT_MASK (0xff)
143# define TIMER_STOP BIT(8)
144
145#define DATA_REG_LOW 0x08 /* BASE+08, LowW, R/W */
146#define DATA_REG_HI 0x0a /* BASE+0a, Hi-W, R/W */
147
148#define FIFO_REST_CNT 0x0c /* BASE+0c, W, R/W */
149# define FIFO_REST_MASK 0x1ff
150# define FIFO_EMPTY_SHLD_FLAG BIT(14)
151# define FIFO_FULL_SHLD_FLAG BIT(15)
152
153#define SREQ_SMPL_RATE 0x0f /* BASE+0f, B, R/W */
154# define SREQSMPLRATE_RATE0 BIT(0)
155# define SREQSMPLRATE_RATE1 BIT(1)
156# define SAMPLING_ENABLE BIT(2)
157# define SMPL_40M (0) /* 40MHz: 0-100ns/period */
158# define SMPL_20M (SREQSMPLRATE_RATE0) /* 20MHz: 100-200ns/period */
159# define SMPL_10M (SREQSMPLRATE_RATE1) /* 10Mhz: 200- ns/period */
160
161#define SCSI_BUS_CONTROL 0x10 /* BASE+10, B, R/W */
162# define BUSCTL_SEL BIT(0)
163# define BUSCTL_RST BIT(1)
164# define BUSCTL_DATAOUT_ENB BIT(2)
165# define BUSCTL_ATN BIT(3)
166# define BUSCTL_ACK BIT(4)
167# define BUSCTL_BSY BIT(5)
168# define AUTODIRECTION BIT(6)
169# define ACKENB BIT(7)
170
171#define CLR_COUNTER 0x12 /* BASE+12, B, W */
172# define ACK_COUNTER_CLR BIT(0)
173# define SREQ_COUNTER_CLR BIT(1)
174# define FIFO_HOST_POINTER_CLR BIT(2)
175# define FIFO_REST_COUNT_CLR BIT(3)
176# define BM_COUNTER_CLR BIT(4)
177# define SAVED_ACK_CLR BIT(5)
178# define CLRCOUNTER_ALLMASK (ACK_COUNTER_CLR | \
179 SREQ_COUNTER_CLR | \
180 FIFO_HOST_POINTER_CLR | \
181 FIFO_REST_COUNT_CLR | \
182 BM_COUNTER_CLR | \
183 SAVED_ACK_CLR )
184
185#define SCSI_BUS_MONITOR 0x12 /* BASE+12, B, R */
186# define BUSMON_MSG BIT(0)
187# define BUSMON_IO BIT(1)
188# define BUSMON_CD BIT(2)
189# define BUSMON_BSY BIT(3)
190# define BUSMON_ACK BIT(4)
191# define BUSMON_REQ BIT(5)
192# define BUSMON_SEL BIT(6)
193# define BUSMON_ATN BIT(7)
194
195#define COMMAND_DATA 0x14 /* BASE+14, B, R/W */
196
197#define PARITY_CONTROL 0x16 /* BASE+16, B, W */
198# define PARITY_CHECK_ENABLE BIT(0)
199# define PARITY_ERROR_CLEAR BIT(1)
200#define PARITY_STATUS 0x16 /* BASE+16, B, R */
201//# define PARITY_CHECK_ENABLE BIT(0)
202# define PARITY_ERROR_NORMAL BIT(1)
203# define PARITY_ERROR_LSB BIT(1)
204# define PARITY_ERROR_MSB BIT(2)
205
206#define RESELECT_ID 0x18 /* BASE+18, B, R */
207
208#define COMMAND_CONTROL 0x18 /* BASE+18, W, W */
209# define CLEAR_CDB_FIFO_POINTER BIT(0)
210# define AUTO_COMMAND_PHASE BIT(1)
211# define AUTOSCSI_START BIT(2)
212# define AUTOSCSI_RESTART BIT(3)
213# define AUTO_PARAMETER BIT(4)
214# define AUTO_ATN BIT(5)
215# define AUTO_MSGIN_00_OR_04 BIT(6)
216# define AUTO_MSGIN_02 BIT(7)
217# define AUTO_MSGIN_03 BIT(8)
218
219#define SET_ARBIT 0x1a /* BASE+1a, B, W */
220# define ARBIT_GO BIT(0)
221# define ARBIT_CLEAR BIT(1)
222
223#define ARBIT_STATUS 0x1a /* BASE+1a, B, R */
224//# define ARBIT_GO BIT(0)
225# define ARBIT_WIN BIT(1)
226# define ARBIT_FAIL BIT(2)
227# define AUTO_PARAMETER_VALID BIT(3)
228# define SGT_VALID BIT(4)
229
230#define SYNC_REG 0x1c /* BASE+1c, B, R/W */
231
232#define ACK_WIDTH 0x1d /* BASE+1d, B, R/W */
233
234#define SCSI_DATA_WITH_ACK 0x20 /* BASE+20, B, R/W */
235#define SCSI_OUT_LATCH_TARGET_ID 0x22 /* BASE+22, B, W */
236#define SCSI_DATA_IN 0x22 /* BASE+22, B, R */
237
238#define SCAM_CONTROL 0x24 /* BASE+24, B, W */
239#define SCAM_STATUS 0x24 /* BASE+24, B, R */
240# define SCAM_MSG BIT(0)
241# define SCAM_IO BIT(1)
242# define SCAM_CD BIT(2)
243# define SCAM_BSY BIT(3)
244# define SCAM_SEL BIT(4)
245# define SCAM_XFEROK BIT(5)
246
247#define SCAM_DATA 0x26 /* BASE+26, B, R/W */
248# define SD0 BIT(0)
249# define SD1 BIT(1)
250# define SD2 BIT(2)
251# define SD3 BIT(3)
252# define SD4 BIT(4)
253# define SD5 BIT(5)
254# define SD6 BIT(6)
255# define SD7 BIT(7)
256
257#define SACK_CNT 0x28 /* BASE+28, DW, R/W */
258#define SREQ_CNT 0x2c /* BASE+2c, DW, R/W */
259
260#define FIFO_DATA_LOW 0x30 /* BASE+30, B/W/DW, R/W */
261#define FIFO_DATA_HIGH 0x32 /* BASE+32, B/W, R/W */
262#define BM_START_ADR 0x34 /* BASE+34, DW, R/W */
263
264#define BM_CNT 0x38 /* BASE+38, DW, R/W */
265# define BM_COUNT_MASK 0x0001ffffUL
266# define SGTEND BIT(31) /* Last SGT marker */
267
268#define SGT_ADR 0x3c /* BASE+3c, DW, R/W */
269#define WAIT_REG 0x40 /* Bi only */
270
271#define SCSI_EXECUTE_PHASE 0x40 /* BASE+40, W, R */
272# define COMMAND_PHASE BIT(0)
273# define DATA_IN_PHASE BIT(1)
274# define DATA_OUT_PHASE BIT(2)
275# define MSGOUT_PHASE BIT(3)
276# define STATUS_PHASE BIT(4)
277# define ILLEGAL_PHASE BIT(5)
278# define BUS_FREE_OCCUER BIT(6)
279# define MSG_IN_OCCUER BIT(7)
280# define MSG_OUT_OCCUER BIT(8)
281# define SELECTION_TIMEOUT BIT(9)
282# define MSGIN_00_VALID BIT(10)
283# define MSGIN_02_VALID BIT(11)
284# define MSGIN_03_VALID BIT(12)
285# define MSGIN_04_VALID BIT(13)
286# define AUTOSCSI_BUSY BIT(15)
287
288#define SCSI_CSB_IN 0x42 /* BASE+42, B, R */
289
290#define SCSI_MSG_OUT 0x44 /* BASE+44, DW, R/W */
291# define MSGOUT_COUNT_MASK (BIT(0)|BIT(1))
292# define MV_VALID BIT(7)
293
294#define SEL_TIME_OUT 0x48 /* BASE+48, W, R/W */
295#define SAVED_SACK_CNT 0x4c /* BASE+4c, DW, R */
296
297#define HTOSDATADELAY 0x50 /* BASE+50, B, R/W */
298#define STOHDATADELAY 0x54 /* BASE+54, B, R/W */
299#define ACKSUMCHECKRD 0x58 /* BASE+58, W, R */
300#define REQSUMCHECKRD 0x5c /* BASE+5c, W, R */
301
302
303/********************/
304/* indexed register */
305/********************/
306
307#define CLOCK_DIV 0x00 /* BASE+08, IDX+00, B, R/W */
308# define CLOCK_2 BIT(0) /* MCLK/2 */
309# define CLOCK_4 BIT(1) /* MCLK/4 */
310# define PCICLK BIT(7) /* PCICLK (33MHz) */
311
312#define TERM_PWR_CONTROL 0x01 /* BASE+08, IDX+01, B, R/W */
313# define BPWR BIT(0)
314# define SENSE BIT(1) /* Read Only */
315
316#define EXT_PORT_DDR 0x02 /* BASE+08, IDX+02, B, R/W */
317#define EXT_PORT 0x03 /* BASE+08, IDX+03, B, R/W */
318# define LED_ON (0)
319# define LED_OFF BIT(0)
320
321#define IRQ_SELECT 0x04 /* BASE+08, IDX+04, W, R/W */
322# define IRQSELECT_RESELECT_IRQ BIT(0)
323# define IRQSELECT_PHASE_CHANGE_IRQ BIT(1)
324# define IRQSELECT_SCSIRESET_IRQ BIT(2)
325# define IRQSELECT_TIMER_IRQ BIT(3)
326# define IRQSELECT_FIFO_SHLD_IRQ BIT(4)
327# define IRQSELECT_TARGET_ABORT_IRQ BIT(5)
328# define IRQSELECT_MASTER_ABORT_IRQ BIT(6)
329# define IRQSELECT_SERR_IRQ BIT(7)
330# define IRQSELECT_PERR_IRQ BIT(8)
331# define IRQSELECT_BMCNTERR_IRQ BIT(9)
332# define IRQSELECT_AUTO_SCSI_SEQ_IRQ BIT(10)
333
334#define OLD_SCSI_PHASE 0x05 /* BASE+08, IDX+05, B, R */
335# define OLD_MSG BIT(0)
336# define OLD_IO BIT(1)
337# define OLD_CD BIT(2)
338# define OLD_BUSY BIT(3)
339
340#define FIFO_FULL_SHLD_COUNT 0x06 /* BASE+08, IDX+06, B, R/W */
341#define FIFO_EMPTY_SHLD_COUNT 0x07 /* BASE+08, IDX+07, B, R/W */
342
343#define EXP_ROM_CONTROL 0x08 /* BASE+08, IDX+08, B, R/W */ /* external ROM control */
344# define ROM_WRITE_ENB BIT(0)
345# define IO_ACCESS_ENB BIT(1)
346# define ROM_ADR_CLEAR BIT(2)
347
348#define EXP_ROM_ADR 0x09 /* BASE+08, IDX+09, W, R/W */
349
350#define EXP_ROM_DATA 0x0a /* BASE+08, IDX+0a, B, R/W */
351
352#define CHIP_MODE 0x0b /* BASE+08, IDX+0b, B, R */ /* NinjaSCSI-32Bi only */
353# define OEM0 BIT(1) /* OEM select */ /* 00=I-O DATA, 01=KME, 10=Workbit, 11=Ext ROM */
354# define OEM1 BIT(2) /* OEM select */
355# define OPTB BIT(3) /* KME mode select */
356# define OPTC BIT(4) /* KME mode select */
357# define OPTD BIT(5) /* KME mode select */
358# define OPTE BIT(6) /* KME mode select */
359# define OPTF BIT(7) /* Power management */
360
361#define MISC_WR 0x0c /* BASE+08, IDX+0c, W, R/W */
362#define MISC_RD 0x0c
363# define SCSI_DIRECTION_DETECTOR_SELECT BIT(0)
364# define SCSI2_HOST_DIRECTION_VALID BIT(1) /* Read only */
365# define HOST2_SCSI_DIRECTION_VALID BIT(2) /* Read only */
366# define DELAYED_BMSTART BIT(3)
367# define MASTER_TERMINATION_SELECT BIT(4)
368# define BMREQ_NEGATE_TIMING_SEL BIT(5)
369# define AUTOSEL_TIMING_SEL BIT(6)
370# define MISC_MABORT_MASK BIT(7)
371# define BMSTOP_CHANGE2_NONDATA_PHASE BIT(8)
372
373#define BM_CYCLE 0x0d /* BASE+08, IDX+0d, B, R/W */
374# define BM_CYCLE0 BIT(0)
375# define BM_CYCLE1 BIT(1)
376# define BM_FRAME_ASSERT_TIMING BIT(2)
377# define BM_IRDY_ASSERT_TIMING BIT(3)
378# define BM_SINGLE_BUS_MASTER BIT(4)
379# define MEMRD_CMD0 BIT(5)
380# define SGT_AUTO_PARA_MEMED_CMD BIT(6)
381# define MEMRD_CMD1 BIT(7)
382
383
384#define SREQ_EDGH 0x0e /* BASE+08, IDX+0e, B, W */
385# define SREQ_EDGH_SELECT BIT(0)
386
387#define UP_CNT 0x0f /* BASE+08, IDX+0f, B, W */
388# define REQCNT_UP BIT(0)
389# define ACKCNT_UP BIT(1)
390# define BMADR_UP BIT(4)
391# define BMCNT_UP BIT(5)
392# define SGT_CNT_UP BIT(7)
393
394#define CFG_CMD_STR 0x10 /* BASE+08, IDX+10, W, R */
395#define CFG_LATE_CACHE 0x11 /* BASE+08, IDX+11, W, R/W */
396#define CFG_BASE_ADR_1 0x12 /* BASE+08, IDX+12, W, R */
397#define CFG_BASE_ADR_2 0x13 /* BASE+08, IDX+13, W, R */
398#define CFG_INLINE 0x14 /* BASE+08, IDX+14, W, R */
399
400#define SERIAL_ROM_CTL 0x15 /* BASE+08, IDX+15, B, R */
401# define SCL BIT(0)
402# define ENA BIT(1)
403# define SDA BIT(2)
404
405#define FIFO_HST_POINTER 0x16 /* BASE+08, IDX+16, B, R/W */
406#define SREQ_DELAY 0x17 /* BASE+08, IDX+17, B, R/W */
407#define SACK_DELAY 0x18 /* BASE+08, IDX+18, B, R/W */
408#define SREQ_NOISE_CANCEL 0x19 /* BASE+08, IDX+19, B, R/W */
409#define SDP_NOISE_CANCEL 0x1a /* BASE+08, IDX+1a, B, R/W */
410#define DELAY_TEST 0x1b /* BASE+08, IDX+1b, B, R/W */
411#define SD0_NOISE_CANCEL 0x20 /* BASE+08, IDX+20, B, R/W */
412#define SD1_NOISE_CANCEL 0x21 /* BASE+08, IDX+21, B, R/W */
413#define SD2_NOISE_CANCEL 0x22 /* BASE+08, IDX+22, B, R/W */
414#define SD3_NOISE_CANCEL 0x23 /* BASE+08, IDX+23, B, R/W */
415#define SD4_NOISE_CANCEL 0x24 /* BASE+08, IDX+24, B, R/W */
416#define SD5_NOISE_CANCEL 0x25 /* BASE+08, IDX+25, B, R/W */
417#define SD6_NOISE_CANCEL 0x26 /* BASE+08, IDX+26, B, R/W */
418#define SD7_NOISE_CANCEL 0x27 /* BASE+08, IDX+27, B, R/W */
419
420
421/*
422 * Useful Bus Monitor status combinations.
423 */
424#define BUSMON_BUS_FREE 0
425#define BUSMON_COMMAND ( BUSMON_BSY | BUSMON_CD | BUSMON_REQ )
426#define BUSMON_MESSAGE_IN ( BUSMON_BSY | BUSMON_MSG | BUSMON_IO | BUSMON_CD | BUSMON_REQ )
427#define BUSMON_MESSAGE_OUT ( BUSMON_BSY | BUSMON_MSG | BUSMON_CD | BUSMON_REQ )
428#define BUSMON_DATA_IN ( BUSMON_BSY | BUSMON_IO | BUSMON_REQ )
429#define BUSMON_DATA_OUT ( BUSMON_BSY | BUSMON_REQ )
430#define BUSMON_STATUS ( BUSMON_BSY | BUSMON_IO | BUSMON_CD | BUSMON_REQ )
431#define BUSMON_RESELECT ( BUSMON_IO | BUSMON_SEL)
432#define BUSMON_PHASE_MASK ( BUSMON_MSG | BUSMON_IO | BUSMON_CD | BUSMON_SEL)
433
434#define BUSPHASE_COMMAND ( BUSMON_COMMAND & BUSMON_PHASE_MASK )
435#define BUSPHASE_MESSAGE_IN ( BUSMON_MESSAGE_IN & BUSMON_PHASE_MASK )
436#define BUSPHASE_MESSAGE_OUT ( BUSMON_MESSAGE_OUT & BUSMON_PHASE_MASK )
437#define BUSPHASE_DATA_IN ( BUSMON_DATA_IN & BUSMON_PHASE_MASK )
438#define BUSPHASE_DATA_OUT ( BUSMON_DATA_OUT & BUSMON_PHASE_MASK )
439#define BUSPHASE_STATUS ( BUSMON_STATUS & BUSMON_PHASE_MASK )
440#define BUSPHASE_SELECT ( BUSMON_SEL | BUSMON_IO )
441
442
443/************************************************************************
444 * structure for DMA/Scatter Gather list
445 */
446#define NSP32_SG_SIZE SG_ALL
447
448typedef struct _nsp32_sgtable {
449 /* values must be little endian */
450 u32_le addr; /* transfer address */
451 u32_le len; /* transfer length. BIT(31) is for SGT_END mark */
452} __attribute__ ((packed)) nsp32_sgtable;
453
454typedef struct _nsp32_sglun {
455 nsp32_sgtable sgt[NSP32_SG_SIZE+1]; /* SG table */
456} __attribute__ ((packed)) nsp32_sglun;
457#define NSP32_SG_TABLE_SIZE (sizeof(nsp32_sgtable) * NSP32_SG_SIZE * MAX_TARGET * MAX_LUN)
458
459/* Auto parameter mode memory map. */
460/* All values must be little endian. */
461typedef struct _nsp32_autoparam {
462 u8 cdb[4 * 0x10]; /* SCSI Command */
463 u32_le msgout; /* outgoing messages */
464 u8 syncreg; /* sync register value */
465 u8 ackwidth; /* ack width register value */
466 u8 target_id; /* target/host device id */
467 u8 sample_reg; /* hazard killer sampling rate */
468 u16_le command_control; /* command control register */
469 u16_le transfer_control; /* transfer control register */
470 u32_le sgt_pointer; /* SG table physical address for DMA */
471 u32_le dummy[2];
472} __attribute__ ((packed)) nsp32_autoparam; /* must be packed struct */
473
474/*
475 * host data structure
476 */
477/* message in/out buffer */
478#define MSGOUTBUF_MAX 20
479#define MSGINBUF_MAX 20
480
481/* flag for trans_method */
482#define NSP32_TRANSFER_BUSMASTER BIT(0)
483#define NSP32_TRANSFER_MMIO BIT(1) /* Not supported yet */
484#define NSP32_TRANSFER_PIO BIT(2) /* Not supported yet */
485
486
487/*
488 * structure for connected LUN dynamic data
489 *
490 * Note: Currently tagged queuing is disabled, each nsp32_lunt holds
491 * one SCSI command and one state.
492 */
493#define DISCPRIV_OK BIT(0) /* DISCPRIV Enable mode */
494#define MSGIN03 BIT(1) /* Auto Msg In 03 Flag */
495
496typedef struct _nsp32_lunt {
497 struct scsi_cmnd *SCpnt; /* Current Handling struct scsi_cmnd */
498 unsigned long save_datp; /* Save Data Pointer - saved position from initial address */
499 int msgin03; /* auto msg in 03 flag */
500 unsigned int sg_num; /* Total number of SG entries */
501 int cur_entry; /* Current SG entry number */
502 nsp32_sglun *sglun; /* sg table per lun */
503 dma_addr_t sglun_paddr; /* sglun physical address */
504} nsp32_lunt;
505
506
507/*
508 * SCSI TARGET/LUN definition
509 */
510#define NSP32_HOST_SCSIID 7 /* SCSI initiator is everytime defined as 7 */
511#define MAX_TARGET 8
512#define MAX_LUN 8 /* XXX: In SPI3, max number of LUN is 64. */
513
514
515typedef struct _nsp32_sync_table {
516 unsigned char period_num; /* period number */
517 unsigned char ackwidth; /* ack width designated by period */
518 unsigned char start_period; /* search range - start period */
519 unsigned char end_period; /* search range - end period */
520 unsigned char sample_rate; /* hazard killer parameter */
521} nsp32_sync_table;
522
523
524/*
525 * structure for target device static data
526 */
527/* flag for nsp32_target.sync_flag */
528#define SDTR_INITIATOR BIT(0) /* sending SDTR from initiator */
529#define SDTR_TARGET BIT(1) /* sending SDTR from target */
530#define SDTR_DONE BIT(2) /* exchanging SDTR has been processed */
531
532/* syncronous period value for nsp32_target.config_max */
533#define FAST5M 0x32
534#define FAST10M 0x19
535#define ULTRA20M 0x0c
536
537/* flag for nsp32_target.{sync_offset}, period */
538#define ASYNC_OFFSET 0 /* asynchronous transfer */
539#define SYNC_OFFSET 0xf /* synchronous transfer max offset */
540
541/* syncreg:
542 bit:07 06 05 04 03 02 01 00
543 ---PERIOD-- ---OFFSET-- */
544#define TO_SYNCREG(period, offset) (((period) & 0x0f) << 4 | ((offset) & 0x0f))
545
546typedef struct _nsp32_target {
547 unsigned char syncreg; /* value for SYNCREG */
548 unsigned char ackwidth; /* value for ACKWIDTH */
549 unsigned char period; /* sync period (0-255) */
550 unsigned char offset; /* sync offset (0-15) */
551 int sync_flag; /* SDTR_*, 0 */
552 int limit_entry; /* max speed limit entry designated
553 by EEPROM configuration */
554 unsigned char sample_reg; /* SREQ hazard killer register */
555} nsp32_target;
556
557typedef struct _nsp32_hw_data {
558 int IrqNumber;
559 int BaseAddress;
560 int NumAddress;
561 void __iomem *MmioAddress;
562#define NSP32_MMIO_OFFSET 0x0800
563 unsigned long MmioLength;
564
565 struct scsi_cmnd *CurrentSC;
566
567 struct pci_dev *Pci;
568 const struct pci_device_id *pci_devid;
569 struct Scsi_Host *Host;
570 spinlock_t Lock;
571
572 char info_str[100];
573
574 /* allocated memory region */
575 nsp32_sglun *sg_list; /* sglist virtuxal address */
576 dma_addr_t sg_paddr; /* physical address of hw_sg_table */
577 nsp32_autoparam *autoparam; /* auto parameter transfer region */
578 dma_addr_t auto_paddr; /* physical address of autoparam */
579 int cur_entry; /* current sgt entry */
580
581 /* target/LUN */
582 nsp32_lunt *cur_lunt; /* Current connected LUN table */
583 nsp32_lunt lunt[MAX_TARGET][MAX_LUN]; /* All LUN table */
584
585 nsp32_target *cur_target; /* Current connected SCSI ID */
586 nsp32_target target[MAX_TARGET]; /* SCSI ID */
587 int cur_id; /* Current connected target ID */
588 int cur_lun; /* Current connected target LUN */
589
590 /* behavior setting parameters */
591 int trans_method; /* transfer method flag */
592 int resettime; /* Reset time */
593 int clock; /* clock dividing flag */
594 nsp32_sync_table *synct; /* sync_table determined by clock */
595 int syncnum; /* the max number of synct element */
596
597 /* message buffer */
598 unsigned char msgoutbuf[MSGOUTBUF_MAX]; /* msgout buffer */
599 char msgout_len; /* msgoutbuf length */
600 unsigned char msginbuf [MSGINBUF_MAX]; /* megin buffer */
601 char msgin_len; /* msginbuf length */
602
603} nsp32_hw_data;
604
605/*
606 * TIME definition
607 */
608#define RESET_HOLD_TIME 10000 /* reset time in us (SCSI-2 says the
609 minimum is 25us) */
610#define SEL_TIMEOUT_TIME 10000 /* 250ms defined in SCSI specification
611 (25.6us/1unit) */
612#define ARBIT_TIMEOUT_TIME 100 /* 100us */
613#define REQSACK_TIMEOUT_TIME 10000 /* max wait time for REQ/SACK assertion
614 or negation, 10000us == 10ms */
615
Linus Torvalds1da177e2005-04-16 15:20:36 -0700616#endif /* _NSP32_H */
617/* end */