drivers/media/IR/mceusb.c

/*
 * Driver for USB Windows Media Center Ed. eHome Infrared Transceivers
 *
 * Copyright (c) 2010 by Jarod Wilson <jarod@redhat.com>
 *
 * Based on the original lirc_mceusb and lirc_mceusb2 drivers, by Dan
 * Conti, Martin Blatter and Daniel Melander, the latter of which was
 * in turn also based on the lirc_atiusb driver by Paul Miller. The
 * two mce drivers were merged into one by Jarod Wilson, with transmit
 * support for the 1st-gen device added primarily by Patrick Calhoun,
 * with a bit of tweaks by Jarod. Debugging improvements and proper
 * support for what appears to be 3rd-gen hardware added by Jarod.
 * Initial port from lirc driver to ir-core drivery by Jarod, based
 * partially on a port to an earlier proposed IR infrastructure by
 * Jon Smirl, which included enhancements and simplifications to the
 * incoming IR buffer parsing routines.
 *
 * TODO:
 * - add rc-core transmit support, once available
 * - enable support for forthcoming ir-lirc-codec interface
 *
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
 *
 */

#include <linux/device.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/input.h>
#include <media/ir-core.h>
#include <media/ir-common.h>

#define DRIVER_VERSION	"1.91"
#define DRIVER_AUTHOR	"Jarod Wilson <jarod@wilsonet.com>"
#define DRIVER_DESC	"Windows Media Center Ed. eHome Infrared Transceiver " \
			"device driver"
#define DRIVER_NAME	"mceusb"

#define USB_BUFLEN	32	/* USB reception buffer length */
#define IRBUF_SIZE	256	/* IR work buffer length */

/* MCE constants */
#define MCE_CMDBUF_SIZE	384 /* MCE Command buffer length */
#define MCE_TIME_UNIT	50 /* Approx 50us resolution */
#define MCE_CODE_LENGTH	5 /* Normal length of packet (with header) */
#define MCE_PACKET_SIZE	4 /* Normal length of packet (without header) */
#define MCE_PACKET_HEADER 0x84 /* Actual header format is 0x80 + num_bytes */
#define MCE_CONTROL_HEADER 0x9F /* MCE status header */
#define MCE_TX_HEADER_LENGTH 3 /* # of bytes in the initializing tx header */
#define MCE_MAX_CHANNELS 2 /* Two transmitters, hardware dependent? */
#define MCE_DEFAULT_TX_MASK 0x03 /* Val opts: TX1=0x01, TX2=0x02, ALL=0x03 */
#define MCE_PULSE_BIT	0x80 /* Pulse bit, MSB set == PULSE else SPACE */
#define MCE_PULSE_MASK	0x7F /* Pulse mask */
#define MCE_MAX_PULSE_LENGTH 0x7F /* Longest transmittable pulse symbol */
#define MCE_PACKET_LENGTH_MASK  0xF /* Packet length mask */


/* module parameters */
#ifdef CONFIG_USB_DEBUG
static int debug = 1;
#else
static int debug;
#endif

/* general constants */
#define SEND_FLAG_IN_PROGRESS	1
#define SEND_FLAG_COMPLETE	2
#define RECV_FLAG_IN_PROGRESS	3
#define RECV_FLAG_COMPLETE	4

#define MCEUSB_RX		1
#define MCEUSB_TX		2

#define VENDOR_PHILIPS		0x0471
#define VENDOR_SMK		0x0609
#define VENDOR_TATUNG		0x1460
#define VENDOR_GATEWAY		0x107b
#define VENDOR_SHUTTLE		0x1308
#define VENDOR_SHUTTLE2		0x051c
#define VENDOR_MITSUMI		0x03ee
#define VENDOR_TOPSEED		0x1784
#define VENDOR_RICAVISION	0x179d
#define VENDOR_ITRON		0x195d
#define VENDOR_FIC		0x1509
#define VENDOR_LG		0x043e
#define VENDOR_MICROSOFT	0x045e
#define VENDOR_FORMOSA		0x147a
#define VENDOR_FINTEK		0x1934
#define VENDOR_PINNACLE		0x2304
#define VENDOR_ECS		0x1019
#define VENDOR_WISTRON		0x0fb8
#define VENDOR_COMPRO		0x185b
#define VENDOR_NORTHSTAR	0x04eb
#define VENDOR_REALTEK		0x0bda
#define VENDOR_TIVO		0x105a

static struct usb_device_id mceusb_dev_table[] = {
	/* Original Microsoft MCE IR Transceiver (often HP-branded) */
	{ USB_DEVICE(VENDOR_MICROSOFT, 0x006d) },
	/* Philips Infrared Transceiver - Sahara branded */
	{ USB_DEVICE(VENDOR_PHILIPS, 0x0608) },
	/* Philips Infrared Transceiver - HP branded */
	{ USB_DEVICE(VENDOR_PHILIPS, 0x060c) },
	/* Philips SRM5100 */
	{ USB_DEVICE(VENDOR_PHILIPS, 0x060d) },
	/* Philips Infrared Transceiver - Omaura */
	{ USB_DEVICE(VENDOR_PHILIPS, 0x060f) },
	/* Philips Infrared Transceiver - Spinel plus */
	{ USB_DEVICE(VENDOR_PHILIPS, 0x0613) },
	/* Philips eHome Infrared Transceiver */
	{ USB_DEVICE(VENDOR_PHILIPS, 0x0815) },
	/* Realtek MCE IR Receiver */
	{ USB_DEVICE(VENDOR_REALTEK, 0x0161) },
	/* SMK/Toshiba G83C0004D410 */
	{ USB_DEVICE(VENDOR_SMK, 0x031d) },
	/* SMK eHome Infrared Transceiver (Sony VAIO) */
	{ USB_DEVICE(VENDOR_SMK, 0x0322) },
	/* bundled with Hauppauge PVR-150 */
	{ USB_DEVICE(VENDOR_SMK, 0x0334) },
	/* SMK eHome Infrared Transceiver */
	{ USB_DEVICE(VENDOR_SMK, 0x0338) },
	/* Tatung eHome Infrared Transceiver */
	{ USB_DEVICE(VENDOR_TATUNG, 0x9150) },
	/* Shuttle eHome Infrared Transceiver */
	{ USB_DEVICE(VENDOR_SHUTTLE, 0xc001) },
	/* Shuttle eHome Infrared Transceiver */
	{ USB_DEVICE(VENDOR_SHUTTLE2, 0xc001) },
	/* Gateway eHome Infrared Transceiver */
	{ USB_DEVICE(VENDOR_GATEWAY, 0x3009) },
	/* Mitsumi */
	{ USB_DEVICE(VENDOR_MITSUMI, 0x2501) },
	/* Topseed eHome Infrared Transceiver */
	{ USB_DEVICE(VENDOR_TOPSEED, 0x0001) },
	/* Topseed HP eHome Infrared Transceiver */
	{ USB_DEVICE(VENDOR_TOPSEED, 0x0006) },
	/* Topseed eHome Infrared Transceiver */
	{ USB_DEVICE(VENDOR_TOPSEED, 0x0007) },
	/* Topseed eHome Infrared Transceiver */
	{ USB_DEVICE(VENDOR_TOPSEED, 0x0008) },
	/* Topseed eHome Infrared Transceiver */
	{ USB_DEVICE(VENDOR_TOPSEED, 0x000a) },
	/* Topseed eHome Infrared Transceiver */
	{ USB_DEVICE(VENDOR_TOPSEED, 0x0011) },
	/* Ricavision internal Infrared Transceiver */
	{ USB_DEVICE(VENDOR_RICAVISION, 0x0010) },
	/* Itron ione Libra Q-11 */
	{ USB_DEVICE(VENDOR_ITRON, 0x7002) },
	/* FIC eHome Infrared Transceiver */
	{ USB_DEVICE(VENDOR_FIC, 0x9242) },
	/* LG eHome Infrared Transceiver */
	{ USB_DEVICE(VENDOR_LG, 0x9803) },
	/* Microsoft MCE Infrared Transceiver */
	{ USB_DEVICE(VENDOR_MICROSOFT, 0x00a0) },
	/* Formosa eHome Infrared Transceiver */
	{ USB_DEVICE(VENDOR_FORMOSA, 0xe015) },
	/* Formosa21 / eHome Infrared Receiver */
	{ USB_DEVICE(VENDOR_FORMOSA, 0xe016) },
	/* Formosa aim / Trust MCE Infrared Receiver */
	{ USB_DEVICE(VENDOR_FORMOSA, 0xe017) },
	/* Formosa Industrial Computing / Beanbag Emulation Device */
	{ USB_DEVICE(VENDOR_FORMOSA, 0xe018) },
	/* Formosa21 / eHome Infrared Receiver */
	{ USB_DEVICE(VENDOR_FORMOSA, 0xe03a) },
	/* Formosa Industrial Computing AIM IR605/A */
	{ USB_DEVICE(VENDOR_FORMOSA, 0xe03c) },
	/* Formosa Industrial Computing */
	{ USB_DEVICE(VENDOR_FORMOSA, 0xe03e) },
	/* Fintek eHome Infrared Transceiver */
	{ USB_DEVICE(VENDOR_FINTEK, 0x0602) },
	/* Fintek eHome Infrared Transceiver (in the AOpen MP45) */
	{ USB_DEVICE(VENDOR_FINTEK, 0x0702) },
	/* Pinnacle Remote Kit */
	{ USB_DEVICE(VENDOR_PINNACLE, 0x0225) },
	/* Elitegroup Computer Systems IR */
	{ USB_DEVICE(VENDOR_ECS, 0x0f38) },
	/* Wistron Corp. eHome Infrared Receiver */
	{ USB_DEVICE(VENDOR_WISTRON, 0x0002) },
	/* Compro K100 */
	{ USB_DEVICE(VENDOR_COMPRO, 0x3020) },
	/* Compro K100 v2 */
	{ USB_DEVICE(VENDOR_COMPRO, 0x3082) },
	/* Northstar Systems, Inc. eHome Infrared Transceiver */
	{ USB_DEVICE(VENDOR_NORTHSTAR, 0xe004) },
	/* TiVo PC IR Receiver */
	{ USB_DEVICE(VENDOR_TIVO, 0x2000) },
	/* Terminating entry */
	{ }
};

static struct usb_device_id gen3_list[] = {
	{ USB_DEVICE(VENDOR_PINNACLE, 0x0225) },
	{ USB_DEVICE(VENDOR_TOPSEED, 0x0008) },
	{}
};

static struct usb_device_id pinnacle_list[] = {
	{ USB_DEVICE(VENDOR_PINNACLE, 0x0225) },
	{}
};

static struct usb_device_id microsoft_gen1_list[] = {
	{ USB_DEVICE(VENDOR_MICROSOFT, 0x006d) },
	{}
};

/* data structure for each usb transceiver */
struct mceusb_dev {
	/* ir-core bits */
	struct ir_input_dev *irdev;
	struct ir_dev_props *props;
	struct ir_input_state *state;
	struct ir_raw_event rawir;

	/* core device bits */
	struct device *dev;
	struct input_dev *idev;

	/* usb */
	struct usb_device *usbdev;
	struct urb *urb_in;
	struct usb_endpoint_descriptor *usb_ep_in;
	struct usb_endpoint_descriptor *usb_ep_out;

	/* buffers and dma */
	unsigned char *buf_in;
	unsigned int len_in;
	u8 cmd;		/* MCE command type */
	u8 rem;		/* Remaining IR data bytes in packet */
	dma_addr_t dma_in;
	dma_addr_t dma_out;

	struct {
		u32 connected:1;
		u32 def_xmit_mask_set:1;
		u32 microsoft_gen1:1;
		u32 gen3:1;
		u32 reserved:28;
	} flags;

	/* handle sending (init strings) */
	int send_flags;
	int carrier;

	char name[128];
	char phys[64];

	unsigned char def_xmit_mask;
	unsigned char cur_xmit_mask;
};

/*
 * MCE Device Command Strings
 * Device command responses vary from device to device...
 * - DEVICE_RESET resets the hardware to its default state
 * - GET_REVISION fetches the hardware/software revision, common
 *   replies are ff 0b 45 ff 1b 08 and ff 0b 50 ff 1b 42
 * - GET_CARRIER_FREQ gets the carrier mode and frequency of the
 *   device, with replies in the form of 9f 06 MM FF, where MM is 0-3,
 *   meaning clk of 10000000, 2500000, 625000 or 156250, and FF is
 *   ((clk / frequency) - 1)
 * - GET_RX_TIMEOUT fetches the receiver timeout in units of 50us,
 *   response in the form of 9f 0c msb lsb
 * - GET_TX_BITMASK fetches the transmitter bitmask, replies in
 *   the form of 9f 08 bm, where bm is the bitmask
 * - GET_RX_SENSOR fetches the RX sensor setting -- long-range
 *   general use one or short-range learning one, in the form of
 *   9f 14 ss, where ss is either 01 for long-range or 02 for short
 * - SET_CARRIER_FREQ sets a new carrier mode and frequency
 * - SET_TX_BITMASK sets the transmitter bitmask
 * - SET_RX_TIMEOUT sets the receiver timeout
 * - SET_RX_SENSOR sets which receiver sensor to use
 */
static char DEVICE_RESET[]	= {0x00, 0xff, 0xaa};
static char GET_REVISION[]	= {0xff, 0x0b};
static char GET_UNKNOWN[]	= {0xff, 0x18};
static char GET_CARRIER_FREQ[]	= {0x9f, 0x07};
static char GET_RX_TIMEOUT[]	= {0x9f, 0x0d};
static char GET_TX_BITMASK[]	= {0x9f, 0x13};
static char GET_RX_SENSOR[]	= {0x9f, 0x15};
/* sub in desired values in lower byte or bytes for full command */
/* FIXME: make use of these for transmit.
static char SET_CARRIER_FREQ[]	= {0x9f, 0x06, 0x00, 0x00};
static char SET_TX_BITMASK[]	= {0x9f, 0x08, 0x00};
static char SET_RX_TIMEOUT[]	= {0x9f, 0x0c, 0x00, 0x00};
static char SET_RX_SENSOR[]	= {0x9f, 0x14, 0x00};
*/

static void mceusb_dev_printdata(struct mceusb_dev *ir, char *buf,
				 int len, bool out)
{
	char codes[USB_BUFLEN * 3 + 1];
	char inout[9];
	int i;
	u8 cmd, subcmd, data1, data2;
	struct device *dev = ir->dev;

	if (len <= 0)
		return;

	if (ir->flags.microsoft_gen1 && len <= 2)
		return;

	for (i = 0; i < len && i < USB_BUFLEN; i++)
		snprintf(codes + i * 3, 4, "%02x ", buf[i] & 0xFF);

	dev_info(dev, "%sx data: %s (length=%d)\n",
		 (out ? "t" : "r"), codes, len);

	if (out)
		strcpy(inout, "Request\0");
	else
		strcpy(inout, "Got\0");

	cmd    = buf[0] & 0xff;
	subcmd = buf[1] & 0xff;
	data1  = buf[2] & 0xff;
	data2  = buf[3] & 0xff;

	switch (cmd) {
	case 0x00:
		if (subcmd == 0xff && data1 == 0xaa)
			dev_info(dev, "Device reset requested\n");
		else
			dev_info(dev, "Unknown command 0x%02x 0x%02x\n",
				 cmd, subcmd);
		break;
	case 0xff:
		switch (subcmd) {
		case 0x0b:
			if (len == 2)
				dev_info(dev, "Get hw/sw rev?\n");
			else
				dev_info(dev, "hw/sw rev 0x%02x 0x%02x "
					 "0x%02x 0x%02x\n", data1, data2,
					 buf[4], buf[5]);
			break;
		case 0xaa:
			dev_info(dev, "Device reset requested\n");
			break;
		case 0xfe:
			dev_info(dev, "Previous command not supported\n");
			break;
		case 0x18:
		case 0x1b:
		default:
			dev_info(dev, "Unknown command 0x%02x 0x%02x\n",
				 cmd, subcmd);
			break;
		}
		break;
	case 0x9f:
		switch (subcmd) {
		case 0x03:
			dev_info(dev, "Ping\n");
			break;
		case 0x04:
			dev_info(dev, "Resp to 9f 05 of 0x%02x 0x%02x\n",
				 data1, data2);
			break;
		case 0x06:
			dev_info(dev, "%s carrier mode and freq of "
				 "0x%02x 0x%02x\n", inout, data1, data2);
			break;
		case 0x07:
			dev_info(dev, "Get carrier mode and freq\n");
			break;
		case 0x08:
			dev_info(dev, "%s transmit blaster mask of 0x%02x\n",
				 inout, data1);
			break;
		case 0x0c:
			/* value is in units of 50us, so x*50/100 or x/2 ms */
			dev_info(dev, "%s receive timeout of %d ms\n",
				 inout, ((data1 << 8) | data2) / 2);
			break;
		case 0x0d:
			dev_info(dev, "Get receive timeout\n");
			break;
		case 0x13:
			dev_info(dev, "Get transmit blaster mask\n");
			break;
		case 0x14:
			dev_info(dev, "%s %s-range receive sensor in use\n",
				 inout, data1 == 0x02 ? "short" : "long");
			break;
		case 0x15:
			if (len == 2)
				dev_info(dev, "Get receive sensor\n");
			else
				dev_info(dev, "Received pulse count is %d\n",
					 ((data1 << 8) | data2));
			break;
		case 0xfe:
			dev_info(dev, "Error! Hardware is likely wedged...\n");
			break;
		case 0x05:
		case 0x09:
		case 0x0f:
		default:
			dev_info(dev, "Unknown command 0x%02x 0x%02x\n",
				 cmd, subcmd);
			break;
		}
		break;
	default:
		break;
	}
}

static void usb_async_callback(struct urb *urb, struct pt_regs *regs)
{
	struct mceusb_dev *ir;
	int len;

	if (!urb)
		return;

	ir = urb->context;
	if (ir) {
		len = urb->actual_length;

		dev_dbg(ir->dev, "callback called (status=%d len=%d)\n",
			urb->status, len);

		if (debug)
			mceusb_dev_printdata(ir, urb->transfer_buffer,
					     len, true);
	}

}

/* request incoming or send outgoing usb packet - used to initialize remote */
static void mce_request_packet(struct mceusb_dev *ir,
			       struct usb_endpoint_descriptor *ep,
			       unsigned char *data, int size, int urb_type)
{
	int res;
	struct urb *async_urb;
	struct device *dev = ir->dev;
	unsigned char *async_buf;

	if (urb_type == MCEUSB_TX) {
		async_urb = usb_alloc_urb(0, GFP_KERNEL);
		if (unlikely(!async_urb)) {
			dev_err(dev, "Error, couldn't allocate urb!\n");
			return;
		}

		async_buf = kzalloc(size, GFP_KERNEL);
		if (!async_buf) {
			dev_err(dev, "Error, couldn't allocate buf!\n");
			usb_free_urb(async_urb);
			return;
		}

		/* outbound data */
		usb_fill_int_urb(async_urb, ir->usbdev,
			usb_sndintpipe(ir->usbdev, ep->bEndpointAddress),
			async_buf, size, (usb_complete_t) usb_async_callback,
			ir, ep->bInterval);
		memcpy(async_buf, data, size);

	} else if (urb_type == MCEUSB_RX) {
		/* standard request */
		async_urb = ir->urb_in;
		ir->send_flags = RECV_FLAG_IN_PROGRESS;

	} else {
		dev_err(dev, "Error! Unknown urb type %d\n", urb_type);
		return;
	}

	dev_dbg(dev, "receive request called (size=%#x)\n", size);

	async_urb->transfer_buffer_length = size;
	async_urb->dev = ir->usbdev;

	res = usb_submit_urb(async_urb, GFP_ATOMIC);
	if (res) {
		dev_dbg(dev, "receive request FAILED! (res=%d)\n", res);
		return;
	}
	dev_dbg(dev, "receive request complete (res=%d)\n", res);
}

static void mce_async_out(struct mceusb_dev *ir, unsigned char *data, int size)
{
	mce_request_packet(ir, ir->usb_ep_out, data, size, MCEUSB_TX);
}

static void mce_sync_in(struct mceusb_dev *ir, unsigned char *data, int size)
{
	mce_request_packet(ir, ir->usb_ep_in, data, size, MCEUSB_RX);
}

static void mceusb_process_ir_data(struct mceusb_dev *ir, int buf_len)
{
	struct ir_raw_event rawir = { .pulse = false, .duration = 0 };
	int i, start_index = 0;

	/* skip meaningless 0xb1 0x60 header bytes on orig receiver */
	if (ir->flags.microsoft_gen1)
		start_index = 2;

	for (i = start_index; i < buf_len;) {
		if (ir->rem == 0) {
			/* decode mce packets of the form (84),AA,BB,CC,DD */
			/* IR data packets can span USB messages - rem */
			ir->rem = (ir->buf_in[i] & MCE_PACKET_LENGTH_MASK);
			ir->cmd = (ir->buf_in[i] & ~MCE_PACKET_LENGTH_MASK);
			dev_dbg(ir->dev, "New data. rem: 0x%02x, cmd: 0x%02x\n",
				ir->rem, ir->cmd);
			i++;
		}

		/* Only cmd 0x8<bytes> is IR data, don't process MCE commands */
		if (ir->cmd != 0x80) {
			ir->rem = 0;
			return;
		}

		for (; (ir->rem > 0) && (i < buf_len); i++) {
			ir->rem--;

			rawir.pulse = ((ir->buf_in[i] & MCE_PULSE_BIT) != 0);
			rawir.duration = (ir->buf_in[i] & MCE_PULSE_MASK)
					 * MCE_TIME_UNIT * 1000;

			if ((ir->buf_in[i] & MCE_PULSE_MASK) == 0x7f) {
				if (ir->rawir.pulse == rawir.pulse)
					ir->rawir.duration += rawir.duration;
				else {
					ir->rawir.duration = rawir.duration;
					ir->rawir.pulse = rawir.pulse;
				}
				continue;
			}
			rawir.duration += ir->rawir.duration;
			ir->rawir.duration = 0;
			ir->rawir.pulse = rawir.pulse;

			dev_dbg(ir->dev, "Storing %s with duration %d\n",
				rawir.pulse ? "pulse" : "space",
				rawir.duration);

			ir_raw_event_store(ir->idev, &rawir);
		}

		if (ir->buf_in[i] == 0x80 || ir->buf_in[i] == 0x9f)
			ir->rem = 0;

		dev_dbg(ir->dev, "calling ir_raw_event_handle\n");
		ir_raw_event_handle(ir->idev);
	}
}

static void mceusb_set_default_xmit_mask(struct urb *urb)
{
	struct mceusb_dev *ir = urb->context;
	char *buffer = urb->transfer_buffer;
	u8 cmd, subcmd, def_xmit_mask;

	cmd    = buffer[0] & 0xff;
	subcmd = buffer[1] & 0xff;

	if (cmd == 0x9f && subcmd == 0x08) {
		def_xmit_mask = buffer[2] & 0xff;
		dev_dbg(ir->dev, "%s: setting xmit mask to 0x%02x\n",
			__func__, def_xmit_mask);
		ir->def_xmit_mask = def_xmit_mask;
		ir->flags.def_xmit_mask_set = 1;
	}
}

static void mceusb_dev_recv(struct urb *urb, struct pt_regs *regs)
{
	struct mceusb_dev *ir;
	int buf_len;

	if (!urb)
		return;

	ir = urb->context;
	if (!ir) {
		usb_unlink_urb(urb);
		return;
	}

	buf_len = urb->actual_length;

	if (!ir->flags.def_xmit_mask_set)
		mceusb_set_default_xmit_mask(urb);

	if (debug)
		mceusb_dev_printdata(ir, urb->transfer_buffer, buf_len, false);

	if (ir->send_flags == RECV_FLAG_IN_PROGRESS) {
		ir->send_flags = SEND_FLAG_COMPLETE;
		dev_dbg(&ir->irdev->dev, "setup answer received %d bytes\n",
			buf_len);
	}

	switch (urb->status) {
	/* success */
	case 0:
		mceusb_process_ir_data(ir, buf_len);
		break;

	case -ECONNRESET:
	case -ENOENT:
	case -ESHUTDOWN:
		usb_unlink_urb(urb);
		return;

	case -EPIPE:
	default:
		break;
	}

	usb_submit_urb(urb, GFP_ATOMIC);
}

static void mceusb_gen1_init(struct mceusb_dev *ir)
{
	int i, ret;
	char junk[64], data[8];
	int partial = 0;
	struct device *dev = ir->dev;

	/*
	 * Clear off the first few messages. These look like calibration
	 * or test data, I can't really tell. This also flushes in case
	 * we have random ir data queued up.
	 */
	for (i = 0; i < 40; i++)
		usb_bulk_msg(ir->usbdev,
			usb_rcvbulkpipe(ir->usbdev,
				ir->usb_ep_in->bEndpointAddress),
			junk, 64, &partial, HZ * 10);

	memset(data, 0, 8);

	/* Get Status */
	ret = usb_control_msg(ir->usbdev, usb_rcvctrlpipe(ir->usbdev, 0),
			      USB_REQ_GET_STATUS, USB_DIR_IN,
			      0, 0, data, 2, HZ * 3);

	/*    ret = usb_get_status( ir->usbdev, 0, 0, data ); */
	dev_dbg(dev, "%s - ret = %d status = 0x%x 0x%x\n", __func__,
		ret, data[0], data[1]);

	/*
	 * This is a strange one. They issue a set address to the device
	 * on the receive control pipe and expect a certain value pair back
	 */
	memset(data, 0, 8);

	ret = usb_control_msg(ir->usbdev, usb_rcvctrlpipe(ir->usbdev, 0),
			      USB_REQ_SET_ADDRESS, USB_TYPE_VENDOR, 0, 0,
			      data, 2, HZ * 3);
	dev_dbg(dev, "%s - ret = %d\n", __func__, ret);
	dev_dbg(dev, "%s - data[0] = %d, data[1] = %d\n",
		__func__, data[0], data[1]);

	/* set feature: bit rate 38400 bps */
	ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0),
			      USB_REQ_SET_FEATURE, USB_TYPE_VENDOR,
			      0xc04e, 0x0000, NULL, 0, HZ * 3);

	dev_dbg(dev, "%s - ret = %d\n", __func__, ret);

	/* bRequest 4: set char length to 8 bits */
	ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0),
			      4, USB_TYPE_VENDOR,
			      0x0808, 0x0000, NULL, 0, HZ * 3);
	dev_dbg(dev, "%s - retB = %d\n", __func__, ret);

	/* bRequest 2: set handshaking to use DTR/DSR */
	ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0),
			      2, USB_TYPE_VENDOR,
			      0x0000, 0x0100, NULL, 0, HZ * 3);
	dev_dbg(dev, "%s - retC = %d\n", __func__, ret);
};

static void mceusb_gen2_init(struct mceusb_dev *ir)
{
	int maxp = ir->len_in;

	mce_sync_in(ir, NULL, maxp);
	mce_sync_in(ir, NULL, maxp);

	/* device reset */
	mce_async_out(ir, DEVICE_RESET, sizeof(DEVICE_RESET));
	mce_sync_in(ir, NULL, maxp);

	/* get hw/sw revision? */
	mce_async_out(ir, GET_REVISION, sizeof(GET_REVISION));
	mce_sync_in(ir, NULL, maxp);

	/* unknown what this actually returns... */
	mce_async_out(ir, GET_UNKNOWN, sizeof(GET_UNKNOWN));
	mce_sync_in(ir, NULL, maxp);
}

static void mceusb_gen3_init(struct mceusb_dev *ir)
{
	int maxp = ir->len_in;

	mce_sync_in(ir, NULL, maxp);

	/* device reset */
	mce_async_out(ir, DEVICE_RESET, sizeof(DEVICE_RESET));
	mce_sync_in(ir, NULL, maxp);

	/* get the carrier and frequency */
	mce_async_out(ir, GET_CARRIER_FREQ, sizeof(GET_CARRIER_FREQ));
	mce_sync_in(ir, NULL, maxp);

	/* get the transmitter bitmask */
	mce_async_out(ir, GET_TX_BITMASK, sizeof(GET_TX_BITMASK));
	mce_sync_in(ir, NULL, maxp);

	/* get receiver timeout value */
	mce_async_out(ir, GET_RX_TIMEOUT, sizeof(GET_RX_TIMEOUT));
	mce_sync_in(ir, NULL, maxp);

	/* get receiver sensor setting */
	mce_async_out(ir, GET_RX_SENSOR, sizeof(GET_RX_SENSOR));
	mce_sync_in(ir, NULL, maxp);
}

static struct input_dev *mceusb_init_input_dev(struct mceusb_dev *ir)
{
	struct input_dev *idev;
	struct ir_dev_props *props;
	struct ir_input_dev *irdev;
	struct ir_input_state *state;
	struct device *dev = ir->dev;
	int ret = -ENODEV;

	idev = input_allocate_device();
	if (!idev) {
		dev_err(dev, "remote input dev allocation failed\n");
		goto idev_alloc_failed;
	}

	ret = -ENOMEM;
	props = kzalloc(sizeof(struct ir_dev_props), GFP_KERNEL);
	if (!props) {
		dev_err(dev, "remote ir dev props allocation failed\n");
		goto props_alloc_failed;
	}

	irdev = kzalloc(sizeof(struct ir_input_dev), GFP_KERNEL);
	if (!irdev) {
		dev_err(dev, "remote ir input dev allocation failed\n");
		goto ir_dev_alloc_failed;
	}

	state = kzalloc(sizeof(struct ir_input_state), GFP_KERNEL);
	if (!state) {
		dev_err(dev, "remote ir state allocation failed\n");
		goto ir_state_alloc_failed;
	}

	snprintf(ir->name, sizeof(ir->name), "Media Center Edition eHome "
		 "Infrared Remote Transceiver (%04x:%04x)",
		 le16_to_cpu(ir->usbdev->descriptor.idVendor),
		 le16_to_cpu(ir->usbdev->descriptor.idProduct));

	ret = ir_input_init(idev, state, IR_TYPE_RC6);
	if (ret < 0)
		goto irdev_failed;

	idev->name = ir->name;

	usb_make_path(ir->usbdev, ir->phys, sizeof(ir->phys));
	strlcat(ir->phys, "/input0", sizeof(ir->phys));
	idev->phys = ir->phys;

	/* FIXME: no EV_REP (yet), we may need our own auto-repeat handling */
	idev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL);

	idev->keybit[BIT_WORD(BTN_MOUSE)] =
		BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_RIGHT);
	idev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y) |
		BIT_MASK(REL_WHEEL);

	props->priv = ir;
	props->driver_type = RC_DRIVER_IR_RAW;
	props->allowed_protos = IR_TYPE_ALL;

	ir->props = props;
	ir->irdev = irdev;
	ir->state = state;

	input_set_drvdata(idev, irdev);

	ret = ir_input_register(idev, RC_MAP_RC6_MCE, props, DRIVER_NAME);
	if (ret < 0) {
		dev_err(dev, "remote input device register failed\n");
		goto irdev_failed;
	}

	return idev;

irdev_failed:
	kfree(state);
ir_state_alloc_failed:
	kfree(irdev);
ir_dev_alloc_failed:
	kfree(props);
props_alloc_failed:
	input_free_device(idev);
idev_alloc_failed:
	return NULL;
}

static int __devinit mceusb_dev_probe(struct usb_interface *intf,
				      const struct usb_device_id *id)
{
	struct usb_device *dev = interface_to_usbdev(intf);
	struct usb_host_interface *idesc;
	struct usb_endpoint_descriptor *ep = NULL;
	struct usb_endpoint_descriptor *ep_in = NULL;
	struct usb_endpoint_descriptor *ep_out = NULL;
	struct usb_host_config *config;
	struct mceusb_dev *ir = NULL;
	int pipe, maxp;
	int i, ret;
	char buf[63], name[128] = "";
	bool is_gen3;
	bool is_microsoft_gen1;
	bool is_pinnacle;

	dev_dbg(&intf->dev, ": %s called\n", __func__);

	usb_reset_device(dev);

	config = dev->actconfig;
	idesc  = intf->cur_altsetting;

	is_gen3 = usb_match_id(intf, gen3_list) ? 1 : 0;
	is_microsoft_gen1 = usb_match_id(intf, microsoft_gen1_list) ? 1 : 0;
	is_pinnacle = usb_match_id(intf, pinnacle_list) ? 1 : 0;

	/* step through the endpoints to find first bulk in and out endpoint */
	for (i = 0; i < idesc->desc.bNumEndpoints; ++i) {
		ep = &idesc->endpoint[i].desc;

		if ((ep_in == NULL)
			&& ((ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
			    == USB_DIR_IN)
			&& (((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
			    == USB_ENDPOINT_XFER_BULK)
			|| ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
			    == USB_ENDPOINT_XFER_INT))) {

			dev_dbg(&intf->dev, ": acceptable inbound endpoint "
				"found\n");
			ep_in = ep;
			ep_in->bmAttributes = USB_ENDPOINT_XFER_INT;
			if (!is_pinnacle)
				/*
				 * Ideally, we'd use what the device offers up,
				 * but that leads to non-functioning first and
				 * second-gen devices, and many devices have an
				 * invalid bInterval of 0. Pinnacle devices
				 * don't work witha  bInterval of 1 though.
				 */
				ep_in->bInterval = 1;
		}

		if ((ep_out == NULL)
			&& ((ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
			    == USB_DIR_OUT)
			&& (((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
			    == USB_ENDPOINT_XFER_BULK)
			|| ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
			    == USB_ENDPOINT_XFER_INT))) {

			dev_dbg(&intf->dev, ": acceptable outbound endpoint "
				"found\n");
			ep_out = ep;
			ep_out->bmAttributes = USB_ENDPOINT_XFER_INT;
			if (!is_pinnacle)
				/*
				 * Ideally, we'd use what the device offers up,
				 * but that leads to non-functioning first and
				 * second-gen devices, and many devices have an
				 * invalid bInterval of 0. Pinnacle devices
				 * don't work witha  bInterval of 1 though.
				 */
				ep_out->bInterval = 1;
		}
	}
	if (ep_in == NULL) {
		dev_dbg(&intf->dev, ": inbound and/or endpoint not found\n");
		return -ENODEV;
	}

	pipe = usb_rcvintpipe(dev, ep_in->bEndpointAddress);
	maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe));

	ir = kzalloc(sizeof(struct mceusb_dev), GFP_KERNEL);
	if (!ir)
		goto mem_alloc_fail;

	ir->buf_in = usb_alloc_coherent(dev, maxp, GFP_ATOMIC, &ir->dma_in);
	if (!ir->buf_in)
		goto buf_in_alloc_fail;

	ir->urb_in = usb_alloc_urb(0, GFP_KERNEL);
	if (!ir->urb_in)
		goto urb_in_alloc_fail;

	ir->usbdev = dev;
	ir->dev = &intf->dev;
	ir->len_in = maxp;
	ir->flags.gen3 = is_gen3;
	ir->flags.microsoft_gen1 = is_microsoft_gen1;

	/* Saving usb interface data for use by the transmitter routine */
	ir->usb_ep_in = ep_in;
	ir->usb_ep_out = ep_out;

	if (dev->descriptor.iManufacturer
	    && usb_string(dev, dev->descriptor.iManufacturer,
			  buf, sizeof(buf)) > 0)
		strlcpy(name, buf, sizeof(name));
	if (dev->descriptor.iProduct
	    && usb_string(dev, dev->descriptor.iProduct,
			  buf, sizeof(buf)) > 0)
		snprintf(name + strlen(name), sizeof(name) - strlen(name),
			 " %s", buf);

	ir->idev = mceusb_init_input_dev(ir);
	if (!ir->idev)
		goto input_dev_fail;

	/* inbound data */
	usb_fill_int_urb(ir->urb_in, dev, pipe, ir->buf_in,
		maxp, (usb_complete_t) mceusb_dev_recv, ir, ep_in->bInterval);
	ir->urb_in->transfer_dma = ir->dma_in;
	ir->urb_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;

	if (is_pinnacle) {
		/*
		 * I have no idea why but this reset seems to be crucial to
		 * getting the device to do outbound IO correctly - without
		 * this the device seems to hang, ignoring all input - although
		 * IR signals are correctly sent from the device, no input is
		 * interpreted by the device and the host never does the
		 * completion routine
		 */
		ret = usb_reset_configuration(dev);
		dev_info(&intf->dev, "usb reset config ret %x\n", ret);
	}

	/* initialize device */
	if (ir->flags.gen3)
		mceusb_gen3_init(ir);

	else if (ir->flags.microsoft_gen1)
		mceusb_gen1_init(ir);

	else
		mceusb_gen2_init(ir);

	mce_sync_in(ir, NULL, maxp);

	/* We've already done this on gen3 devices */
	if (!ir->flags.def_xmit_mask_set) {
		mce_async_out(ir, GET_TX_BITMASK, sizeof(GET_TX_BITMASK));
		mce_sync_in(ir, NULL, maxp);
	}

	usb_set_intfdata(intf, ir);

	dev_info(&intf->dev, "Registered %s on usb%d:%d\n", name,
		 dev->bus->busnum, dev->devnum);

	return 0;

	/* Error-handling path */
input_dev_fail:
	usb_free_urb(ir->urb_in);
urb_in_alloc_fail:
	usb_free_coherent(dev, maxp, ir->buf_in, ir->dma_in);
buf_in_alloc_fail:
	kfree(ir);
mem_alloc_fail:
	dev_err(&intf->dev, "%s: device setup failed!\n", __func__);

	return -ENOMEM;
}


static void __devexit mceusb_dev_disconnect(struct usb_interface *intf)
{
	struct usb_device *dev = interface_to_usbdev(intf);
	struct mceusb_dev *ir = usb_get_intfdata(intf);

	usb_set_intfdata(intf, NULL);

	if (!ir)
		return;

	ir->usbdev = NULL;
	input_unregister_device(ir->idev);
	usb_kill_urb(ir->urb_in);
	usb_free_urb(ir->urb_in);
	usb_free_coherent(dev, ir->len_in, ir->buf_in, ir->dma_in);

	kfree(ir);
}

static int mceusb_dev_suspend(struct usb_interface *intf, pm_message_t message)
{
	struct mceusb_dev *ir = usb_get_intfdata(intf);
	dev_info(ir->dev, "suspend\n");
	usb_kill_urb(ir->urb_in);
	return 0;
}

static int mceusb_dev_resume(struct usb_interface *intf)
{
	struct mceusb_dev *ir = usb_get_intfdata(intf);
	dev_info(ir->dev, "resume\n");
	if (usb_submit_urb(ir->urb_in, GFP_ATOMIC))
		return -EIO;
	return 0;
}

static struct usb_driver mceusb_dev_driver = {
	.name =		DRIVER_NAME,
	.probe =	mceusb_dev_probe,
	.disconnect =	mceusb_dev_disconnect,
	.suspend =	mceusb_dev_suspend,
	.resume =	mceusb_dev_resume,
	.reset_resume =	mceusb_dev_resume,
	.id_table =	mceusb_dev_table
};

static int __init mceusb_dev_init(void)
{
	int ret;

	ret = usb_register(&mceusb_dev_driver);
	if (ret < 0)
		printk(KERN_ERR DRIVER_NAME
		       ": usb register failed, result = %d\n", ret);

	return ret;
}

static void __exit mceusb_dev_exit(void)
{
	usb_deregister(&mceusb_dev_driver);
}

module_init(mceusb_dev_init);
module_exit(mceusb_dev_exit);

MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(usb, mceusb_dev_table);

module_param(debug, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Debug enabled or not");