James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 1 | /* |
| 2 | * Aic94xx SAS/SATA driver access to shared data structures and memory |
| 3 | * maps. |
| 4 | * |
| 5 | * Copyright (C) 2005 Adaptec, Inc. All rights reserved. |
| 6 | * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com> |
| 7 | * |
| 8 | * This file is licensed under GPLv2. |
| 9 | * |
| 10 | * This file is part of the aic94xx driver. |
| 11 | * |
| 12 | * The aic94xx driver is free software; you can redistribute it and/or |
| 13 | * modify it under the terms of the GNU General Public License as |
| 14 | * published by the Free Software Foundation; version 2 of the |
| 15 | * License. |
| 16 | * |
| 17 | * The aic94xx driver is distributed in the hope that it will be useful, |
| 18 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 19 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| 20 | * General Public License for more details. |
| 21 | * |
| 22 | * You should have received a copy of the GNU General Public License |
| 23 | * along with the aic94xx driver; if not, write to the Free Software |
| 24 | * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| 25 | * |
| 26 | */ |
| 27 | |
| 28 | #include <linux/pci.h> |
Tejun Heo | 5a0e3ad | 2010-03-24 17:04:11 +0900 | [diff] [blame] | 29 | #include <linux/slab.h> |
James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 30 | #include <linux/delay.h> |
| 31 | |
| 32 | #include "aic94xx.h" |
| 33 | #include "aic94xx_reg.h" |
Gilbert Wu | 1237c98 | 2007-10-22 15:19:11 -0700 | [diff] [blame] | 34 | #include "aic94xx_sds.h" |
James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 35 | |
| 36 | /* ---------- OCM stuff ---------- */ |
| 37 | |
| 38 | struct asd_ocm_dir_ent { |
| 39 | u8 type; |
| 40 | u8 offs[3]; |
| 41 | u8 _r1; |
| 42 | u8 size[3]; |
| 43 | } __attribute__ ((packed)); |
| 44 | |
| 45 | struct asd_ocm_dir { |
| 46 | char sig[2]; |
| 47 | u8 _r1[2]; |
| 48 | u8 major; /* 0 */ |
| 49 | u8 minor; /* 0 */ |
| 50 | u8 _r2; |
| 51 | u8 num_de; |
| 52 | struct asd_ocm_dir_ent entry[15]; |
| 53 | } __attribute__ ((packed)); |
| 54 | |
| 55 | #define OCM_DE_OCM_DIR 0x00 |
| 56 | #define OCM_DE_WIN_DRVR 0x01 |
| 57 | #define OCM_DE_BIOS_CHIM 0x02 |
| 58 | #define OCM_DE_RAID_ENGN 0x03 |
| 59 | #define OCM_DE_BIOS_INTL 0x04 |
| 60 | #define OCM_DE_BIOS_CHIM_OSM 0x05 |
| 61 | #define OCM_DE_BIOS_CHIM_DYNAMIC 0x06 |
| 62 | #define OCM_DE_ADDC2C_RES0 0x07 |
| 63 | #define OCM_DE_ADDC2C_RES1 0x08 |
| 64 | #define OCM_DE_ADDC2C_RES2 0x09 |
| 65 | #define OCM_DE_ADDC2C_RES3 0x0A |
| 66 | |
| 67 | #define OCM_INIT_DIR_ENTRIES 5 |
| 68 | /*************************************************************************** |
Matt LaPlante | 0779bf2 | 2006-11-30 05:24:39 +0100 | [diff] [blame] | 69 | * OCM directory default |
James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 70 | ***************************************************************************/ |
| 71 | static struct asd_ocm_dir OCMDirInit = |
| 72 | { |
| 73 | .sig = {0x4D, 0x4F}, /* signature */ |
| 74 | .num_de = OCM_INIT_DIR_ENTRIES, /* no. of directory entries */ |
| 75 | }; |
| 76 | |
| 77 | /*************************************************************************** |
Matt LaPlante | 0779bf2 | 2006-11-30 05:24:39 +0100 | [diff] [blame] | 78 | * OCM directory Entries default |
James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 79 | ***************************************************************************/ |
| 80 | static struct asd_ocm_dir_ent OCMDirEntriesInit[OCM_INIT_DIR_ENTRIES] = |
| 81 | { |
| 82 | { |
| 83 | .type = (OCM_DE_ADDC2C_RES0), /* Entry type */ |
| 84 | .offs = {128}, /* Offset */ |
| 85 | .size = {0, 4}, /* size */ |
| 86 | }, |
| 87 | { |
| 88 | .type = (OCM_DE_ADDC2C_RES1), /* Entry type */ |
| 89 | .offs = {128, 4}, /* Offset */ |
| 90 | .size = {0, 4}, /* size */ |
| 91 | }, |
| 92 | { |
| 93 | .type = (OCM_DE_ADDC2C_RES2), /* Entry type */ |
| 94 | .offs = {128, 8}, /* Offset */ |
| 95 | .size = {0, 4}, /* size */ |
| 96 | }, |
| 97 | { |
| 98 | .type = (OCM_DE_ADDC2C_RES3), /* Entry type */ |
| 99 | .offs = {128, 12}, /* Offset */ |
| 100 | .size = {0, 4}, /* size */ |
| 101 | }, |
| 102 | { |
| 103 | .type = (OCM_DE_WIN_DRVR), /* Entry type */ |
| 104 | .offs = {128, 16}, /* Offset */ |
| 105 | .size = {128, 235, 1}, /* size */ |
| 106 | }, |
| 107 | }; |
| 108 | |
| 109 | struct asd_bios_chim_struct { |
| 110 | char sig[4]; |
| 111 | u8 major; /* 1 */ |
| 112 | u8 minor; /* 0 */ |
| 113 | u8 bios_major; |
| 114 | u8 bios_minor; |
| 115 | __le32 bios_build; |
| 116 | u8 flags; |
| 117 | u8 pci_slot; |
| 118 | __le16 ue_num; |
| 119 | __le16 ue_size; |
| 120 | u8 _r[14]; |
| 121 | /* The unit element array is right here. |
| 122 | */ |
| 123 | } __attribute__ ((packed)); |
| 124 | |
| 125 | /** |
| 126 | * asd_read_ocm_seg - read an on chip memory (OCM) segment |
| 127 | * @asd_ha: pointer to the host adapter structure |
| 128 | * @buffer: where to write the read data |
| 129 | * @offs: offset into OCM where to read from |
| 130 | * @size: how many bytes to read |
| 131 | * |
| 132 | * Return the number of bytes not read. Return 0 on success. |
| 133 | */ |
| 134 | static int asd_read_ocm_seg(struct asd_ha_struct *asd_ha, void *buffer, |
| 135 | u32 offs, int size) |
| 136 | { |
| 137 | u8 *p = buffer; |
| 138 | if (unlikely(asd_ha->iospace)) |
| 139 | asd_read_reg_string(asd_ha, buffer, offs+OCM_BASE_ADDR, size); |
| 140 | else { |
| 141 | for ( ; size > 0; size--, offs++, p++) |
| 142 | *p = asd_read_ocm_byte(asd_ha, offs); |
| 143 | } |
| 144 | return size; |
| 145 | } |
| 146 | |
| 147 | static int asd_read_ocm_dir(struct asd_ha_struct *asd_ha, |
| 148 | struct asd_ocm_dir *dir, u32 offs) |
| 149 | { |
| 150 | int err = asd_read_ocm_seg(asd_ha, dir, offs, sizeof(*dir)); |
| 151 | if (err) { |
| 152 | ASD_DPRINTK("couldn't read ocm segment\n"); |
| 153 | return err; |
| 154 | } |
| 155 | |
| 156 | if (dir->sig[0] != 'M' || dir->sig[1] != 'O') { |
| 157 | ASD_DPRINTK("no valid dir signature(%c%c) at start of OCM\n", |
| 158 | dir->sig[0], dir->sig[1]); |
| 159 | return -ENOENT; |
| 160 | } |
| 161 | if (dir->major != 0) { |
| 162 | asd_printk("unsupported major version of ocm dir:0x%x\n", |
| 163 | dir->major); |
| 164 | return -ENOENT; |
| 165 | } |
| 166 | dir->num_de &= 0xf; |
| 167 | return 0; |
| 168 | } |
| 169 | |
| 170 | /** |
| 171 | * asd_write_ocm_seg - write an on chip memory (OCM) segment |
| 172 | * @asd_ha: pointer to the host adapter structure |
| 173 | * @buffer: where to read the write data |
| 174 | * @offs: offset into OCM to write to |
| 175 | * @size: how many bytes to write |
| 176 | * |
| 177 | * Return the number of bytes not written. Return 0 on success. |
| 178 | */ |
| 179 | static void asd_write_ocm_seg(struct asd_ha_struct *asd_ha, void *buffer, |
| 180 | u32 offs, int size) |
| 181 | { |
| 182 | u8 *p = buffer; |
| 183 | if (unlikely(asd_ha->iospace)) |
| 184 | asd_write_reg_string(asd_ha, buffer, offs+OCM_BASE_ADDR, size); |
| 185 | else { |
| 186 | for ( ; size > 0; size--, offs++, p++) |
| 187 | asd_write_ocm_byte(asd_ha, offs, *p); |
| 188 | } |
| 189 | return; |
| 190 | } |
| 191 | |
| 192 | #define THREE_TO_NUM(X) ((X)[0] | ((X)[1] << 8) | ((X)[2] << 16)) |
| 193 | |
| 194 | static int asd_find_dir_entry(struct asd_ocm_dir *dir, u8 type, |
| 195 | u32 *offs, u32 *size) |
| 196 | { |
| 197 | int i; |
| 198 | struct asd_ocm_dir_ent *ent; |
| 199 | |
| 200 | for (i = 0; i < dir->num_de; i++) { |
| 201 | if (dir->entry[i].type == type) |
| 202 | break; |
| 203 | } |
| 204 | if (i >= dir->num_de) |
| 205 | return -ENOENT; |
| 206 | ent = &dir->entry[i]; |
| 207 | *offs = (u32) THREE_TO_NUM(ent->offs); |
| 208 | *size = (u32) THREE_TO_NUM(ent->size); |
| 209 | return 0; |
| 210 | } |
| 211 | |
| 212 | #define OCM_BIOS_CHIM_DE 2 |
| 213 | #define BC_BIOS_PRESENT 1 |
| 214 | |
| 215 | static int asd_get_bios_chim(struct asd_ha_struct *asd_ha, |
| 216 | struct asd_ocm_dir *dir) |
| 217 | { |
| 218 | int err; |
| 219 | struct asd_bios_chim_struct *bc_struct; |
| 220 | u32 offs, size; |
| 221 | |
| 222 | err = asd_find_dir_entry(dir, OCM_BIOS_CHIM_DE, &offs, &size); |
| 223 | if (err) { |
| 224 | ASD_DPRINTK("couldn't find BIOS_CHIM dir ent\n"); |
| 225 | goto out; |
| 226 | } |
| 227 | err = -ENOMEM; |
| 228 | bc_struct = kmalloc(sizeof(*bc_struct), GFP_KERNEL); |
| 229 | if (!bc_struct) { |
| 230 | asd_printk("no memory for bios_chim struct\n"); |
| 231 | goto out; |
| 232 | } |
| 233 | err = asd_read_ocm_seg(asd_ha, (void *)bc_struct, offs, |
| 234 | sizeof(*bc_struct)); |
| 235 | if (err) { |
| 236 | ASD_DPRINTK("couldn't read ocm segment\n"); |
| 237 | goto out2; |
| 238 | } |
| 239 | if (strncmp(bc_struct->sig, "SOIB", 4) |
| 240 | && strncmp(bc_struct->sig, "IPSA", 4)) { |
| 241 | ASD_DPRINTK("BIOS_CHIM entry has no valid sig(%c%c%c%c)\n", |
| 242 | bc_struct->sig[0], bc_struct->sig[1], |
| 243 | bc_struct->sig[2], bc_struct->sig[3]); |
| 244 | err = -ENOENT; |
| 245 | goto out2; |
| 246 | } |
| 247 | if (bc_struct->major != 1) { |
| 248 | asd_printk("BIOS_CHIM unsupported major version:0x%x\n", |
| 249 | bc_struct->major); |
| 250 | err = -ENOENT; |
| 251 | goto out2; |
| 252 | } |
| 253 | if (bc_struct->flags & BC_BIOS_PRESENT) { |
| 254 | asd_ha->hw_prof.bios.present = 1; |
| 255 | asd_ha->hw_prof.bios.maj = bc_struct->bios_major; |
| 256 | asd_ha->hw_prof.bios.min = bc_struct->bios_minor; |
| 257 | asd_ha->hw_prof.bios.bld = le32_to_cpu(bc_struct->bios_build); |
| 258 | ASD_DPRINTK("BIOS present (%d,%d), %d\n", |
| 259 | asd_ha->hw_prof.bios.maj, |
| 260 | asd_ha->hw_prof.bios.min, |
| 261 | asd_ha->hw_prof.bios.bld); |
| 262 | } |
| 263 | asd_ha->hw_prof.ue.num = le16_to_cpu(bc_struct->ue_num); |
| 264 | asd_ha->hw_prof.ue.size= le16_to_cpu(bc_struct->ue_size); |
| 265 | ASD_DPRINTK("ue num:%d, ue size:%d\n", asd_ha->hw_prof.ue.num, |
| 266 | asd_ha->hw_prof.ue.size); |
| 267 | size = asd_ha->hw_prof.ue.num * asd_ha->hw_prof.ue.size; |
| 268 | if (size > 0) { |
| 269 | err = -ENOMEM; |
| 270 | asd_ha->hw_prof.ue.area = kmalloc(size, GFP_KERNEL); |
| 271 | if (!asd_ha->hw_prof.ue.area) |
| 272 | goto out2; |
| 273 | err = asd_read_ocm_seg(asd_ha, (void *)asd_ha->hw_prof.ue.area, |
| 274 | offs + sizeof(*bc_struct), size); |
| 275 | if (err) { |
| 276 | kfree(asd_ha->hw_prof.ue.area); |
| 277 | asd_ha->hw_prof.ue.area = NULL; |
| 278 | asd_ha->hw_prof.ue.num = 0; |
| 279 | asd_ha->hw_prof.ue.size = 0; |
| 280 | ASD_DPRINTK("couldn't read ue entries(%d)\n", err); |
| 281 | } |
| 282 | } |
| 283 | out2: |
| 284 | kfree(bc_struct); |
| 285 | out: |
| 286 | return err; |
| 287 | } |
| 288 | |
| 289 | static void |
| 290 | asd_hwi_initialize_ocm_dir (struct asd_ha_struct *asd_ha) |
| 291 | { |
| 292 | int i; |
| 293 | |
| 294 | /* Zero OCM */ |
| 295 | for (i = 0; i < OCM_MAX_SIZE; i += 4) |
| 296 | asd_write_ocm_dword(asd_ha, i, 0); |
| 297 | |
| 298 | /* Write Dir */ |
| 299 | asd_write_ocm_seg(asd_ha, &OCMDirInit, 0, |
| 300 | sizeof(struct asd_ocm_dir)); |
| 301 | |
| 302 | /* Write Dir Entries */ |
| 303 | for (i = 0; i < OCM_INIT_DIR_ENTRIES; i++) |
| 304 | asd_write_ocm_seg(asd_ha, &OCMDirEntriesInit[i], |
| 305 | sizeof(struct asd_ocm_dir) + |
| 306 | (i * sizeof(struct asd_ocm_dir_ent)) |
| 307 | , sizeof(struct asd_ocm_dir_ent)); |
| 308 | |
| 309 | } |
| 310 | |
| 311 | static int |
| 312 | asd_hwi_check_ocm_access (struct asd_ha_struct *asd_ha) |
| 313 | { |
| 314 | struct pci_dev *pcidev = asd_ha->pcidev; |
| 315 | u32 reg; |
| 316 | int err = 0; |
| 317 | u32 v; |
| 318 | |
| 319 | /* check if OCM has been initialized by BIOS */ |
| 320 | reg = asd_read_reg_dword(asd_ha, EXSICNFGR); |
| 321 | |
| 322 | if (!(reg & OCMINITIALIZED)) { |
| 323 | err = pci_read_config_dword(pcidev, PCIC_INTRPT_STAT, &v); |
| 324 | if (err) { |
| 325 | asd_printk("couldn't access PCIC_INTRPT_STAT of %s\n", |
| 326 | pci_name(pcidev)); |
| 327 | goto out; |
| 328 | } |
| 329 | |
| 330 | printk(KERN_INFO "OCM is not initialized by BIOS," |
| 331 | "reinitialize it and ignore it, current IntrptStatus" |
| 332 | "is 0x%x\n", v); |
| 333 | |
| 334 | if (v) |
| 335 | err = pci_write_config_dword(pcidev, |
| 336 | PCIC_INTRPT_STAT, v); |
| 337 | if (err) { |
| 338 | asd_printk("couldn't write PCIC_INTRPT_STAT of %s\n", |
| 339 | pci_name(pcidev)); |
| 340 | goto out; |
| 341 | } |
| 342 | |
| 343 | asd_hwi_initialize_ocm_dir(asd_ha); |
| 344 | |
| 345 | } |
| 346 | out: |
| 347 | return err; |
| 348 | } |
| 349 | |
| 350 | /** |
| 351 | * asd_read_ocm - read on chip memory (OCM) |
| 352 | * @asd_ha: pointer to the host adapter structure |
| 353 | */ |
| 354 | int asd_read_ocm(struct asd_ha_struct *asd_ha) |
| 355 | { |
| 356 | int err; |
| 357 | struct asd_ocm_dir *dir; |
| 358 | |
| 359 | if (asd_hwi_check_ocm_access(asd_ha)) |
| 360 | return -1; |
| 361 | |
| 362 | dir = kmalloc(sizeof(*dir), GFP_KERNEL); |
| 363 | if (!dir) { |
| 364 | asd_printk("no memory for ocm dir\n"); |
| 365 | return -ENOMEM; |
| 366 | } |
| 367 | |
| 368 | err = asd_read_ocm_dir(asd_ha, dir, 0); |
| 369 | if (err) |
| 370 | goto out; |
| 371 | |
| 372 | err = asd_get_bios_chim(asd_ha, dir); |
| 373 | out: |
| 374 | kfree(dir); |
| 375 | return err; |
| 376 | } |
| 377 | |
| 378 | /* ---------- FLASH stuff ---------- */ |
| 379 | |
| 380 | #define FLASH_RESET 0xF0 |
James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 381 | |
Andrew Morton | d297a5d | 2007-11-14 17:00:45 -0800 | [diff] [blame] | 382 | #define ASD_FLASH_SIZE 0x200000 |
James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 383 | #define FLASH_DIR_COOKIE "*** ADAPTEC FLASH DIRECTORY *** " |
| 384 | #define FLASH_NEXT_ENTRY_OFFS 0x2000 |
| 385 | #define FLASH_MAX_DIR_ENTRIES 32 |
| 386 | |
| 387 | #define FLASH_DE_TYPE_MASK 0x3FFFFFFF |
| 388 | #define FLASH_DE_MS 0x120 |
| 389 | #define FLASH_DE_CTRL_A_USER 0xE0 |
| 390 | |
| 391 | struct asd_flash_de { |
| 392 | __le32 type; |
| 393 | __le32 offs; |
| 394 | __le32 pad_size; |
| 395 | __le32 image_size; |
| 396 | __le32 chksum; |
| 397 | u8 _r[12]; |
| 398 | u8 version[32]; |
| 399 | } __attribute__ ((packed)); |
| 400 | |
| 401 | struct asd_flash_dir { |
| 402 | u8 cookie[32]; |
| 403 | __le32 rev; /* 2 */ |
| 404 | __le32 chksum; |
| 405 | __le32 chksum_antidote; |
| 406 | __le32 bld; |
| 407 | u8 bld_id[32]; /* build id data */ |
| 408 | u8 ver_data[32]; /* date and time of build */ |
| 409 | __le32 ae_mask; |
| 410 | __le32 v_mask; |
| 411 | __le32 oc_mask; |
| 412 | u8 _r[20]; |
| 413 | struct asd_flash_de dir_entry[FLASH_MAX_DIR_ENTRIES]; |
| 414 | } __attribute__ ((packed)); |
| 415 | |
| 416 | struct asd_manuf_sec { |
| 417 | char sig[2]; /* 'S', 'M' */ |
| 418 | u16 offs_next; |
| 419 | u8 maj; /* 0 */ |
| 420 | u8 min; /* 0 */ |
| 421 | u16 chksum; |
| 422 | u16 size; |
| 423 | u8 _r[6]; |
| 424 | u8 sas_addr[SAS_ADDR_SIZE]; |
| 425 | u8 pcba_sn[ASD_PCBA_SN_SIZE]; |
| 426 | /* Here start the other segments */ |
| 427 | u8 linked_list[0]; |
| 428 | } __attribute__ ((packed)); |
| 429 | |
| 430 | struct asd_manuf_phy_desc { |
| 431 | u8 state; /* low 4 bits */ |
Alexis Bruemmer | 86b9c4c | 2007-01-16 15:36:12 -0800 | [diff] [blame] | 432 | #define MS_PHY_STATE_ENABLED 0 |
James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 433 | #define MS_PHY_STATE_REPORTED 1 |
| 434 | #define MS_PHY_STATE_HIDDEN 2 |
| 435 | u8 phy_id; |
| 436 | u16 _r; |
| 437 | u8 phy_control_0; /* mode 5 reg 0x160 */ |
| 438 | u8 phy_control_1; /* mode 5 reg 0x161 */ |
| 439 | u8 phy_control_2; /* mode 5 reg 0x162 */ |
| 440 | u8 phy_control_3; /* mode 5 reg 0x163 */ |
| 441 | } __attribute__ ((packed)); |
| 442 | |
| 443 | struct asd_manuf_phy_param { |
| 444 | char sig[2]; /* 'P', 'M' */ |
| 445 | u16 next; |
| 446 | u8 maj; /* 0 */ |
| 447 | u8 min; /* 2 */ |
| 448 | u8 num_phy_desc; /* 8 */ |
| 449 | u8 phy_desc_size; /* 8 */ |
| 450 | u8 _r[3]; |
| 451 | u8 usage_model_id; |
| 452 | u32 _r2; |
| 453 | struct asd_manuf_phy_desc phy_desc[ASD_MAX_PHYS]; |
| 454 | } __attribute__ ((packed)); |
| 455 | |
| 456 | #if 0 |
| 457 | static const char *asd_sb_type[] = { |
| 458 | "unknown", |
| 459 | "SGPIO", |
| 460 | [2 ... 0x7F] = "unknown", |
| 461 | [0x80] = "ADPT_I2C", |
| 462 | [0x81 ... 0xFF] = "VENDOR_UNIQUExx" |
| 463 | }; |
| 464 | #endif |
| 465 | |
| 466 | struct asd_ms_sb_desc { |
| 467 | u8 type; |
| 468 | u8 node_desc_index; |
| 469 | u8 conn_desc_index; |
| 470 | u8 _recvd[0]; |
| 471 | } __attribute__ ((packed)); |
| 472 | |
| 473 | #if 0 |
| 474 | static const char *asd_conn_type[] = { |
| 475 | [0 ... 7] = "unknown", |
| 476 | "SFF8470", |
| 477 | "SFF8482", |
| 478 | "SFF8484", |
| 479 | [0x80] = "PCIX_DAUGHTER0", |
| 480 | [0x81] = "SAS_DAUGHTER0", |
| 481 | [0x82 ... 0xFF] = "VENDOR_UNIQUExx" |
| 482 | }; |
| 483 | |
| 484 | static const char *asd_conn_location[] = { |
| 485 | "unknown", |
| 486 | "internal", |
| 487 | "external", |
| 488 | "board_to_board", |
| 489 | }; |
| 490 | #endif |
| 491 | |
| 492 | struct asd_ms_conn_desc { |
| 493 | u8 type; |
| 494 | u8 location; |
| 495 | u8 num_sideband_desc; |
| 496 | u8 size_sideband_desc; |
| 497 | u32 _resvd; |
| 498 | u8 name[16]; |
| 499 | struct asd_ms_sb_desc sb_desc[0]; |
| 500 | } __attribute__ ((packed)); |
| 501 | |
| 502 | struct asd_nd_phy_desc { |
| 503 | u8 vp_attch_type; |
| 504 | u8 attch_specific[0]; |
| 505 | } __attribute__ ((packed)); |
| 506 | |
| 507 | #if 0 |
| 508 | static const char *asd_node_type[] = { |
| 509 | "IOP", |
| 510 | "IO_CONTROLLER", |
| 511 | "EXPANDER", |
| 512 | "PORT_MULTIPLIER", |
| 513 | "PORT_MULTIPLEXER", |
| 514 | "MULTI_DROP_I2C_BUS", |
| 515 | }; |
| 516 | #endif |
| 517 | |
| 518 | struct asd_ms_node_desc { |
| 519 | u8 type; |
| 520 | u8 num_phy_desc; |
| 521 | u8 size_phy_desc; |
| 522 | u8 _resvd; |
| 523 | u8 name[16]; |
| 524 | struct asd_nd_phy_desc phy_desc[0]; |
| 525 | } __attribute__ ((packed)); |
| 526 | |
| 527 | struct asd_ms_conn_map { |
| 528 | char sig[2]; /* 'M', 'C' */ |
| 529 | __le16 next; |
| 530 | u8 maj; /* 0 */ |
| 531 | u8 min; /* 0 */ |
| 532 | __le16 cm_size; /* size of this struct */ |
| 533 | u8 num_conn; |
| 534 | u8 conn_size; |
| 535 | u8 num_nodes; |
| 536 | u8 usage_model_id; |
| 537 | u32 _resvd; |
| 538 | struct asd_ms_conn_desc conn_desc[0]; |
| 539 | struct asd_ms_node_desc node_desc[0]; |
| 540 | } __attribute__ ((packed)); |
| 541 | |
| 542 | struct asd_ctrla_phy_entry { |
| 543 | u8 sas_addr[SAS_ADDR_SIZE]; |
| 544 | u8 sas_link_rates; /* max in hi bits, min in low bits */ |
| 545 | u8 flags; |
| 546 | u8 sata_link_rates; |
| 547 | u8 _r[5]; |
| 548 | } __attribute__ ((packed)); |
| 549 | |
| 550 | struct asd_ctrla_phy_settings { |
| 551 | u8 id0; /* P'h'y */ |
| 552 | u8 _r; |
| 553 | u16 next; |
| 554 | u8 num_phys; /* number of PHYs in the PCI function */ |
| 555 | u8 _r2[3]; |
| 556 | struct asd_ctrla_phy_entry phy_ent[ASD_MAX_PHYS]; |
| 557 | } __attribute__ ((packed)); |
| 558 | |
| 559 | struct asd_ll_el { |
| 560 | u8 id0; |
| 561 | u8 id1; |
| 562 | __le16 next; |
| 563 | u8 something_here[0]; |
| 564 | } __attribute__ ((packed)); |
| 565 | |
| 566 | static int asd_poll_flash(struct asd_ha_struct *asd_ha) |
| 567 | { |
| 568 | int c; |
| 569 | u8 d; |
| 570 | |
| 571 | for (c = 5000; c > 0; c--) { |
| 572 | d = asd_read_reg_byte(asd_ha, asd_ha->hw_prof.flash.bar); |
| 573 | d ^= asd_read_reg_byte(asd_ha, asd_ha->hw_prof.flash.bar); |
| 574 | if (!d) |
| 575 | return 0; |
| 576 | udelay(5); |
| 577 | } |
| 578 | return -ENOENT; |
| 579 | } |
| 580 | |
| 581 | static int asd_reset_flash(struct asd_ha_struct *asd_ha) |
| 582 | { |
| 583 | int err; |
| 584 | |
| 585 | err = asd_poll_flash(asd_ha); |
| 586 | if (err) |
| 587 | return err; |
| 588 | asd_write_reg_byte(asd_ha, asd_ha->hw_prof.flash.bar, FLASH_RESET); |
| 589 | err = asd_poll_flash(asd_ha); |
| 590 | |
| 591 | return err; |
| 592 | } |
| 593 | |
Adrian Bunk | 81e56de | 2008-03-28 14:48:34 -0700 | [diff] [blame] | 594 | static int asd_read_flash_seg(struct asd_ha_struct *asd_ha, |
| 595 | void *buffer, u32 offs, int size) |
James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 596 | { |
| 597 | asd_read_reg_string(asd_ha, buffer, asd_ha->hw_prof.flash.bar+offs, |
| 598 | size); |
| 599 | return 0; |
| 600 | } |
| 601 | |
| 602 | /** |
| 603 | * asd_find_flash_dir - finds and reads the flash directory |
| 604 | * @asd_ha: pointer to the host adapter structure |
| 605 | * @flash_dir: pointer to flash directory structure |
| 606 | * |
| 607 | * If found, the flash directory segment will be copied to |
| 608 | * @flash_dir. Return 1 if found, 0 if not. |
| 609 | */ |
| 610 | static int asd_find_flash_dir(struct asd_ha_struct *asd_ha, |
| 611 | struct asd_flash_dir *flash_dir) |
| 612 | { |
| 613 | u32 v; |
Andrew Morton | d297a5d | 2007-11-14 17:00:45 -0800 | [diff] [blame] | 614 | for (v = 0; v < ASD_FLASH_SIZE; v += FLASH_NEXT_ENTRY_OFFS) { |
James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 615 | asd_read_flash_seg(asd_ha, flash_dir, v, |
| 616 | sizeof(FLASH_DIR_COOKIE)-1); |
| 617 | if (memcmp(flash_dir->cookie, FLASH_DIR_COOKIE, |
| 618 | sizeof(FLASH_DIR_COOKIE)-1) == 0) { |
| 619 | asd_ha->hw_prof.flash.dir_offs = v; |
| 620 | asd_read_flash_seg(asd_ha, flash_dir, v, |
| 621 | sizeof(*flash_dir)); |
| 622 | return 1; |
| 623 | } |
| 624 | } |
| 625 | return 0; |
| 626 | } |
| 627 | |
| 628 | static int asd_flash_getid(struct asd_ha_struct *asd_ha) |
| 629 | { |
| 630 | int err = 0; |
Alexis Bruemmer | f2d719c | 2006-09-07 14:32:16 -0700 | [diff] [blame] | 631 | u32 reg; |
James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 632 | |
| 633 | reg = asd_read_reg_dword(asd_ha, EXSICNFGR); |
| 634 | |
James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 635 | if (pci_read_config_dword(asd_ha->pcidev, PCI_CONF_FLSH_BAR, |
| 636 | &asd_ha->hw_prof.flash.bar)) { |
| 637 | asd_printk("couldn't read PCI_CONF_FLSH_BAR of %s\n", |
| 638 | pci_name(asd_ha->pcidev)); |
| 639 | return -ENOENT; |
| 640 | } |
| 641 | asd_ha->hw_prof.flash.present = 1; |
| 642 | asd_ha->hw_prof.flash.wide = reg & FLASHW ? 1 : 0; |
| 643 | err = asd_reset_flash(asd_ha); |
| 644 | if (err) { |
| 645 | ASD_DPRINTK("couldn't reset flash(%d)\n", err); |
| 646 | return err; |
| 647 | } |
Alexis Bruemmer | f2d719c | 2006-09-07 14:32:16 -0700 | [diff] [blame] | 648 | return 0; |
James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 649 | } |
| 650 | |
| 651 | static u16 asd_calc_flash_chksum(u16 *p, int size) |
| 652 | { |
| 653 | u16 chksum = 0; |
| 654 | |
| 655 | while (size-- > 0) |
| 656 | chksum += *p++; |
| 657 | |
| 658 | return chksum; |
| 659 | } |
| 660 | |
| 661 | |
| 662 | static int asd_find_flash_de(struct asd_flash_dir *flash_dir, u32 entry_type, |
| 663 | u32 *offs, u32 *size) |
| 664 | { |
| 665 | int i; |
| 666 | struct asd_flash_de *de; |
| 667 | |
| 668 | for (i = 0; i < FLASH_MAX_DIR_ENTRIES; i++) { |
| 669 | u32 type = le32_to_cpu(flash_dir->dir_entry[i].type); |
| 670 | |
| 671 | type &= FLASH_DE_TYPE_MASK; |
| 672 | if (type == entry_type) |
| 673 | break; |
| 674 | } |
| 675 | if (i >= FLASH_MAX_DIR_ENTRIES) |
| 676 | return -ENOENT; |
| 677 | de = &flash_dir->dir_entry[i]; |
| 678 | *offs = le32_to_cpu(de->offs); |
| 679 | *size = le32_to_cpu(de->pad_size); |
| 680 | return 0; |
| 681 | } |
| 682 | |
| 683 | static int asd_validate_ms(struct asd_manuf_sec *ms) |
| 684 | { |
| 685 | if (ms->sig[0] != 'S' || ms->sig[1] != 'M') { |
| 686 | ASD_DPRINTK("manuf sec: no valid sig(%c%c)\n", |
| 687 | ms->sig[0], ms->sig[1]); |
| 688 | return -ENOENT; |
| 689 | } |
| 690 | if (ms->maj != 0) { |
| 691 | asd_printk("unsupported manuf. sector. major version:%x\n", |
| 692 | ms->maj); |
| 693 | return -ENOENT; |
| 694 | } |
| 695 | ms->offs_next = le16_to_cpu((__force __le16) ms->offs_next); |
| 696 | ms->chksum = le16_to_cpu((__force __le16) ms->chksum); |
| 697 | ms->size = le16_to_cpu((__force __le16) ms->size); |
| 698 | |
| 699 | if (asd_calc_flash_chksum((u16 *)ms, ms->size/2)) { |
| 700 | asd_printk("failed manuf sector checksum\n"); |
| 701 | } |
| 702 | |
| 703 | return 0; |
| 704 | } |
| 705 | |
| 706 | static int asd_ms_get_sas_addr(struct asd_ha_struct *asd_ha, |
| 707 | struct asd_manuf_sec *ms) |
| 708 | { |
| 709 | memcpy(asd_ha->hw_prof.sas_addr, ms->sas_addr, SAS_ADDR_SIZE); |
| 710 | return 0; |
| 711 | } |
| 712 | |
| 713 | static int asd_ms_get_pcba_sn(struct asd_ha_struct *asd_ha, |
| 714 | struct asd_manuf_sec *ms) |
| 715 | { |
| 716 | memcpy(asd_ha->hw_prof.pcba_sn, ms->pcba_sn, ASD_PCBA_SN_SIZE); |
| 717 | asd_ha->hw_prof.pcba_sn[ASD_PCBA_SN_SIZE] = '\0'; |
| 718 | return 0; |
| 719 | } |
| 720 | |
| 721 | /** |
| 722 | * asd_find_ll_by_id - find a linked list entry by its id |
| 723 | * @start: void pointer to the first element in the linked list |
| 724 | * @id0: the first byte of the id (offs 0) |
| 725 | * @id1: the second byte of the id (offs 1) |
| 726 | * |
| 727 | * @start has to be the _base_ element start, since the |
| 728 | * linked list entries's offset is from this pointer. |
| 729 | * Some linked list entries use only the first id, in which case |
| 730 | * you can pass 0xFF for the second. |
| 731 | */ |
| 732 | static void *asd_find_ll_by_id(void * const start, const u8 id0, const u8 id1) |
| 733 | { |
| 734 | struct asd_ll_el *el = start; |
| 735 | |
| 736 | do { |
| 737 | switch (id1) { |
| 738 | default: |
| 739 | if (el->id1 == id1) |
| 740 | case 0xFF: |
| 741 | if (el->id0 == id0) |
| 742 | return el; |
| 743 | } |
| 744 | el = start + le16_to_cpu(el->next); |
| 745 | } while (el != start); |
| 746 | |
| 747 | return NULL; |
| 748 | } |
| 749 | |
| 750 | /** |
| 751 | * asd_ms_get_phy_params - get phy parameters from the manufacturing sector |
| 752 | * @asd_ha: pointer to the host adapter structure |
| 753 | * @manuf_sec: pointer to the manufacturing sector |
| 754 | * |
| 755 | * The manufacturing sector contans also the linked list of sub-segments, |
| 756 | * since when it was read, its size was taken from the flash directory, |
| 757 | * not from the structure size. |
| 758 | * |
| 759 | * HIDDEN phys do not count in the total count. REPORTED phys cannot |
| 760 | * be enabled but are reported and counted towards the total. |
Alexis Bruemmer | 86b9c4c | 2007-01-16 15:36:12 -0800 | [diff] [blame] | 761 | * ENABLED phys are enabled by default and count towards the total. |
James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 762 | * The absolute total phy number is ASD_MAX_PHYS. hw_prof->num_phys |
| 763 | * merely specifies the number of phys the host adapter decided to |
| 764 | * report. E.g., it is possible for phys 0, 1 and 2 to be HIDDEN, |
Alexis Bruemmer | 86b9c4c | 2007-01-16 15:36:12 -0800 | [diff] [blame] | 765 | * phys 3, 4 and 5 to be REPORTED and phys 6 and 7 to be ENABLED. |
James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 766 | * In this case ASD_MAX_PHYS is 8, hw_prof->num_phys is 5, and only 2 |
| 767 | * are actually enabled (enabled by default, max number of phys |
| 768 | * enableable in this case). |
| 769 | */ |
| 770 | static int asd_ms_get_phy_params(struct asd_ha_struct *asd_ha, |
| 771 | struct asd_manuf_sec *manuf_sec) |
| 772 | { |
| 773 | int i; |
| 774 | int en_phys = 0; |
| 775 | int rep_phys = 0; |
| 776 | struct asd_manuf_phy_param *phy_param; |
| 777 | struct asd_manuf_phy_param dflt_phy_param; |
| 778 | |
| 779 | phy_param = asd_find_ll_by_id(manuf_sec, 'P', 'M'); |
| 780 | if (!phy_param) { |
| 781 | ASD_DPRINTK("ms: no phy parameters found\n"); |
| 782 | ASD_DPRINTK("ms: Creating default phy parameters\n"); |
| 783 | dflt_phy_param.sig[0] = 'P'; |
| 784 | dflt_phy_param.sig[1] = 'M'; |
| 785 | dflt_phy_param.maj = 0; |
| 786 | dflt_phy_param.min = 2; |
| 787 | dflt_phy_param.num_phy_desc = 8; |
| 788 | dflt_phy_param.phy_desc_size = sizeof(struct asd_manuf_phy_desc); |
| 789 | for (i =0; i < ASD_MAX_PHYS; i++) { |
| 790 | dflt_phy_param.phy_desc[i].state = 0; |
| 791 | dflt_phy_param.phy_desc[i].phy_id = i; |
| 792 | dflt_phy_param.phy_desc[i].phy_control_0 = 0xf6; |
| 793 | dflt_phy_param.phy_desc[i].phy_control_1 = 0x10; |
| 794 | dflt_phy_param.phy_desc[i].phy_control_2 = 0x43; |
| 795 | dflt_phy_param.phy_desc[i].phy_control_3 = 0xeb; |
| 796 | } |
| 797 | |
| 798 | phy_param = &dflt_phy_param; |
| 799 | |
| 800 | } |
| 801 | |
| 802 | if (phy_param->maj != 0) { |
| 803 | asd_printk("unsupported manuf. phy param major version:0x%x\n", |
| 804 | phy_param->maj); |
| 805 | return -ENOENT; |
| 806 | } |
| 807 | |
| 808 | ASD_DPRINTK("ms: num_phy_desc: %d\n", phy_param->num_phy_desc); |
| 809 | asd_ha->hw_prof.enabled_phys = 0; |
| 810 | for (i = 0; i < phy_param->num_phy_desc; i++) { |
| 811 | struct asd_manuf_phy_desc *pd = &phy_param->phy_desc[i]; |
| 812 | switch (pd->state & 0xF) { |
| 813 | case MS_PHY_STATE_HIDDEN: |
| 814 | ASD_DPRINTK("ms: phy%d: HIDDEN\n", i); |
| 815 | continue; |
| 816 | case MS_PHY_STATE_REPORTED: |
| 817 | ASD_DPRINTK("ms: phy%d: REPORTED\n", i); |
| 818 | asd_ha->hw_prof.enabled_phys &= ~(1 << i); |
| 819 | rep_phys++; |
| 820 | continue; |
Alexis Bruemmer | 86b9c4c | 2007-01-16 15:36:12 -0800 | [diff] [blame] | 821 | case MS_PHY_STATE_ENABLED: |
| 822 | ASD_DPRINTK("ms: phy%d: ENABLED\n", i); |
James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 823 | asd_ha->hw_prof.enabled_phys |= (1 << i); |
| 824 | en_phys++; |
| 825 | break; |
| 826 | } |
| 827 | asd_ha->hw_prof.phy_desc[i].phy_control_0 = pd->phy_control_0; |
| 828 | asd_ha->hw_prof.phy_desc[i].phy_control_1 = pd->phy_control_1; |
| 829 | asd_ha->hw_prof.phy_desc[i].phy_control_2 = pd->phy_control_2; |
| 830 | asd_ha->hw_prof.phy_desc[i].phy_control_3 = pd->phy_control_3; |
| 831 | } |
| 832 | asd_ha->hw_prof.max_phys = rep_phys + en_phys; |
| 833 | asd_ha->hw_prof.num_phys = en_phys; |
| 834 | ASD_DPRINTK("ms: max_phys:0x%x, num_phys:0x%x\n", |
| 835 | asd_ha->hw_prof.max_phys, asd_ha->hw_prof.num_phys); |
| 836 | ASD_DPRINTK("ms: enabled_phys:0x%x\n", asd_ha->hw_prof.enabled_phys); |
| 837 | return 0; |
| 838 | } |
| 839 | |
| 840 | static int asd_ms_get_connector_map(struct asd_ha_struct *asd_ha, |
| 841 | struct asd_manuf_sec *manuf_sec) |
| 842 | { |
| 843 | struct asd_ms_conn_map *cm; |
| 844 | |
| 845 | cm = asd_find_ll_by_id(manuf_sec, 'M', 'C'); |
| 846 | if (!cm) { |
| 847 | ASD_DPRINTK("ms: no connector map found\n"); |
| 848 | return 0; |
| 849 | } |
| 850 | |
| 851 | if (cm->maj != 0) { |
| 852 | ASD_DPRINTK("ms: unsupported: connector map major version 0x%x" |
| 853 | "\n", cm->maj); |
| 854 | return -ENOENT; |
| 855 | } |
| 856 | |
| 857 | /* XXX */ |
| 858 | |
| 859 | return 0; |
| 860 | } |
| 861 | |
| 862 | |
| 863 | /** |
| 864 | * asd_process_ms - find and extract information from the manufacturing sector |
| 865 | * @asd_ha: pointer to the host adapter structure |
| 866 | * @flash_dir: pointer to the flash directory |
| 867 | */ |
| 868 | static int asd_process_ms(struct asd_ha_struct *asd_ha, |
| 869 | struct asd_flash_dir *flash_dir) |
| 870 | { |
| 871 | int err; |
| 872 | struct asd_manuf_sec *manuf_sec; |
| 873 | u32 offs, size; |
| 874 | |
| 875 | err = asd_find_flash_de(flash_dir, FLASH_DE_MS, &offs, &size); |
| 876 | if (err) { |
| 877 | ASD_DPRINTK("Couldn't find the manuf. sector\n"); |
| 878 | goto out; |
| 879 | } |
| 880 | |
| 881 | if (size == 0) |
| 882 | goto out; |
| 883 | |
| 884 | err = -ENOMEM; |
| 885 | manuf_sec = kmalloc(size, GFP_KERNEL); |
| 886 | if (!manuf_sec) { |
| 887 | ASD_DPRINTK("no mem for manuf sector\n"); |
| 888 | goto out; |
| 889 | } |
| 890 | |
| 891 | err = asd_read_flash_seg(asd_ha, (void *)manuf_sec, offs, size); |
| 892 | if (err) { |
| 893 | ASD_DPRINTK("couldn't read manuf sector at 0x%x, size 0x%x\n", |
| 894 | offs, size); |
| 895 | goto out2; |
| 896 | } |
| 897 | |
| 898 | err = asd_validate_ms(manuf_sec); |
| 899 | if (err) { |
| 900 | ASD_DPRINTK("couldn't validate manuf sector\n"); |
| 901 | goto out2; |
| 902 | } |
| 903 | |
| 904 | err = asd_ms_get_sas_addr(asd_ha, manuf_sec); |
| 905 | if (err) { |
| 906 | ASD_DPRINTK("couldn't read the SAS_ADDR\n"); |
| 907 | goto out2; |
| 908 | } |
| 909 | ASD_DPRINTK("manuf sect SAS_ADDR %llx\n", |
| 910 | SAS_ADDR(asd_ha->hw_prof.sas_addr)); |
| 911 | |
| 912 | err = asd_ms_get_pcba_sn(asd_ha, manuf_sec); |
| 913 | if (err) { |
| 914 | ASD_DPRINTK("couldn't read the PCBA SN\n"); |
| 915 | goto out2; |
| 916 | } |
| 917 | ASD_DPRINTK("manuf sect PCBA SN %s\n", asd_ha->hw_prof.pcba_sn); |
| 918 | |
| 919 | err = asd_ms_get_phy_params(asd_ha, manuf_sec); |
| 920 | if (err) { |
| 921 | ASD_DPRINTK("ms: couldn't get phy parameters\n"); |
| 922 | goto out2; |
| 923 | } |
| 924 | |
| 925 | err = asd_ms_get_connector_map(asd_ha, manuf_sec); |
| 926 | if (err) { |
| 927 | ASD_DPRINTK("ms: couldn't get connector map\n"); |
| 928 | goto out2; |
| 929 | } |
| 930 | |
| 931 | out2: |
| 932 | kfree(manuf_sec); |
| 933 | out: |
| 934 | return err; |
| 935 | } |
| 936 | |
| 937 | static int asd_process_ctrla_phy_settings(struct asd_ha_struct *asd_ha, |
| 938 | struct asd_ctrla_phy_settings *ps) |
| 939 | { |
| 940 | int i; |
| 941 | for (i = 0; i < ps->num_phys; i++) { |
| 942 | struct asd_ctrla_phy_entry *pe = &ps->phy_ent[i]; |
| 943 | |
| 944 | if (!PHY_ENABLED(asd_ha, i)) |
| 945 | continue; |
| 946 | if (*(u64 *)pe->sas_addr == 0) { |
| 947 | asd_ha->hw_prof.enabled_phys &= ~(1 << i); |
| 948 | continue; |
| 949 | } |
| 950 | /* This is the SAS address which should be sent in IDENTIFY. */ |
| 951 | memcpy(asd_ha->hw_prof.phy_desc[i].sas_addr, pe->sas_addr, |
| 952 | SAS_ADDR_SIZE); |
| 953 | asd_ha->hw_prof.phy_desc[i].max_sas_lrate = |
| 954 | (pe->sas_link_rates & 0xF0) >> 4; |
| 955 | asd_ha->hw_prof.phy_desc[i].min_sas_lrate = |
| 956 | (pe->sas_link_rates & 0x0F); |
| 957 | asd_ha->hw_prof.phy_desc[i].max_sata_lrate = |
| 958 | (pe->sata_link_rates & 0xF0) >> 4; |
| 959 | asd_ha->hw_prof.phy_desc[i].min_sata_lrate = |
| 960 | (pe->sata_link_rates & 0x0F); |
| 961 | asd_ha->hw_prof.phy_desc[i].flags = pe->flags; |
| 962 | ASD_DPRINTK("ctrla: phy%d: sas_addr: %llx, sas rate:0x%x-0x%x," |
| 963 | " sata rate:0x%x-0x%x, flags:0x%x\n", |
| 964 | i, |
| 965 | SAS_ADDR(asd_ha->hw_prof.phy_desc[i].sas_addr), |
| 966 | asd_ha->hw_prof.phy_desc[i].max_sas_lrate, |
| 967 | asd_ha->hw_prof.phy_desc[i].min_sas_lrate, |
| 968 | asd_ha->hw_prof.phy_desc[i].max_sata_lrate, |
| 969 | asd_ha->hw_prof.phy_desc[i].min_sata_lrate, |
| 970 | asd_ha->hw_prof.phy_desc[i].flags); |
| 971 | } |
| 972 | |
| 973 | return 0; |
| 974 | } |
| 975 | |
| 976 | /** |
| 977 | * asd_process_ctrl_a_user - process CTRL-A user settings |
| 978 | * @asd_ha: pointer to the host adapter structure |
| 979 | * @flash_dir: pointer to the flash directory |
| 980 | */ |
| 981 | static int asd_process_ctrl_a_user(struct asd_ha_struct *asd_ha, |
| 982 | struct asd_flash_dir *flash_dir) |
| 983 | { |
| 984 | int err, i; |
| 985 | u32 offs, size; |
Hannes Reinecke | 36dd5ac | 2015-07-06 13:07:58 +0200 | [diff] [blame] | 986 | struct asd_ll_el *el = NULL; |
James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 987 | struct asd_ctrla_phy_settings *ps; |
| 988 | struct asd_ctrla_phy_settings dflt_ps; |
| 989 | |
| 990 | err = asd_find_flash_de(flash_dir, FLASH_DE_CTRL_A_USER, &offs, &size); |
| 991 | if (err) { |
| 992 | ASD_DPRINTK("couldn't find CTRL-A user settings section\n"); |
| 993 | ASD_DPRINTK("Creating default CTRL-A user settings section\n"); |
| 994 | |
| 995 | dflt_ps.id0 = 'h'; |
| 996 | dflt_ps.num_phys = 8; |
| 997 | for (i =0; i < ASD_MAX_PHYS; i++) { |
| 998 | memcpy(dflt_ps.phy_ent[i].sas_addr, |
| 999 | asd_ha->hw_prof.sas_addr, SAS_ADDR_SIZE); |
| 1000 | dflt_ps.phy_ent[i].sas_link_rates = 0x98; |
| 1001 | dflt_ps.phy_ent[i].flags = 0x0; |
| 1002 | dflt_ps.phy_ent[i].sata_link_rates = 0x0; |
| 1003 | } |
| 1004 | |
| 1005 | size = sizeof(struct asd_ctrla_phy_settings); |
| 1006 | ps = &dflt_ps; |
Hannes Reinecke | 36dd5ac | 2015-07-06 13:07:58 +0200 | [diff] [blame] | 1007 | goto out_process; |
James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 1008 | } |
| 1009 | |
| 1010 | if (size == 0) |
| 1011 | goto out; |
| 1012 | |
| 1013 | err = -ENOMEM; |
| 1014 | el = kmalloc(size, GFP_KERNEL); |
| 1015 | if (!el) { |
| 1016 | ASD_DPRINTK("no mem for ctrla user settings section\n"); |
| 1017 | goto out; |
| 1018 | } |
| 1019 | |
| 1020 | err = asd_read_flash_seg(asd_ha, (void *)el, offs, size); |
| 1021 | if (err) { |
| 1022 | ASD_DPRINTK("couldn't read ctrla phy settings section\n"); |
| 1023 | goto out2; |
| 1024 | } |
| 1025 | |
| 1026 | err = -ENOENT; |
| 1027 | ps = asd_find_ll_by_id(el, 'h', 0xFF); |
| 1028 | if (!ps) { |
| 1029 | ASD_DPRINTK("couldn't find ctrla phy settings struct\n"); |
| 1030 | goto out2; |
| 1031 | } |
Hannes Reinecke | 36dd5ac | 2015-07-06 13:07:58 +0200 | [diff] [blame] | 1032 | out_process: |
James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 1033 | err = asd_process_ctrla_phy_settings(asd_ha, ps); |
| 1034 | if (err) { |
| 1035 | ASD_DPRINTK("couldn't process ctrla phy settings\n"); |
| 1036 | goto out2; |
| 1037 | } |
| 1038 | out2: |
| 1039 | kfree(el); |
| 1040 | out: |
| 1041 | return err; |
| 1042 | } |
| 1043 | |
| 1044 | /** |
| 1045 | * asd_read_flash - read flash memory |
| 1046 | * @asd_ha: pointer to the host adapter structure |
| 1047 | */ |
| 1048 | int asd_read_flash(struct asd_ha_struct *asd_ha) |
| 1049 | { |
| 1050 | int err; |
| 1051 | struct asd_flash_dir *flash_dir; |
| 1052 | |
| 1053 | err = asd_flash_getid(asd_ha); |
| 1054 | if (err) |
| 1055 | return err; |
| 1056 | |
| 1057 | flash_dir = kmalloc(sizeof(*flash_dir), GFP_KERNEL); |
| 1058 | if (!flash_dir) |
| 1059 | return -ENOMEM; |
| 1060 | |
| 1061 | err = -ENOENT; |
| 1062 | if (!asd_find_flash_dir(asd_ha, flash_dir)) { |
| 1063 | ASD_DPRINTK("couldn't find flash directory\n"); |
| 1064 | goto out; |
| 1065 | } |
| 1066 | |
| 1067 | if (le32_to_cpu(flash_dir->rev) != 2) { |
| 1068 | asd_printk("unsupported flash dir version:0x%x\n", |
| 1069 | le32_to_cpu(flash_dir->rev)); |
| 1070 | goto out; |
| 1071 | } |
| 1072 | |
| 1073 | err = asd_process_ms(asd_ha, flash_dir); |
| 1074 | if (err) { |
| 1075 | ASD_DPRINTK("couldn't process manuf sector settings\n"); |
| 1076 | goto out; |
| 1077 | } |
| 1078 | |
| 1079 | err = asd_process_ctrl_a_user(asd_ha, flash_dir); |
| 1080 | if (err) { |
| 1081 | ASD_DPRINTK("couldn't process CTRL-A user settings\n"); |
| 1082 | goto out; |
| 1083 | } |
| 1084 | |
| 1085 | out: |
| 1086 | kfree(flash_dir); |
| 1087 | return err; |
| 1088 | } |
Gilbert Wu | 1237c98 | 2007-10-22 15:19:11 -0700 | [diff] [blame] | 1089 | |
| 1090 | /** |
| 1091 | * asd_verify_flash_seg - verify data with flash memory |
| 1092 | * @asd_ha: pointer to the host adapter structure |
| 1093 | * @src: pointer to the source data to be verified |
| 1094 | * @dest_offset: offset from flash memory |
| 1095 | * @bytes_to_verify: total bytes to verify |
| 1096 | */ |
| 1097 | int asd_verify_flash_seg(struct asd_ha_struct *asd_ha, |
David Woodhouse | 0bc202e | 2008-05-24 00:05:45 +0100 | [diff] [blame] | 1098 | const void *src, u32 dest_offset, u32 bytes_to_verify) |
Gilbert Wu | 1237c98 | 2007-10-22 15:19:11 -0700 | [diff] [blame] | 1099 | { |
David Woodhouse | 0bc202e | 2008-05-24 00:05:45 +0100 | [diff] [blame] | 1100 | const u8 *src_buf; |
Gilbert Wu | 1237c98 | 2007-10-22 15:19:11 -0700 | [diff] [blame] | 1101 | u8 flash_char; |
| 1102 | int err; |
| 1103 | u32 nv_offset, reg, i; |
| 1104 | |
| 1105 | reg = asd_ha->hw_prof.flash.bar; |
| 1106 | src_buf = NULL; |
| 1107 | |
| 1108 | err = FLASH_OK; |
| 1109 | nv_offset = dest_offset; |
David Woodhouse | 0bc202e | 2008-05-24 00:05:45 +0100 | [diff] [blame] | 1110 | src_buf = (const u8 *)src; |
Gilbert Wu | 1237c98 | 2007-10-22 15:19:11 -0700 | [diff] [blame] | 1111 | for (i = 0; i < bytes_to_verify; i++) { |
| 1112 | flash_char = asd_read_reg_byte(asd_ha, reg + nv_offset + i); |
| 1113 | if (flash_char != src_buf[i]) { |
| 1114 | err = FAIL_VERIFY; |
| 1115 | break; |
| 1116 | } |
| 1117 | } |
| 1118 | return err; |
| 1119 | } |
| 1120 | |
| 1121 | /** |
| 1122 | * asd_write_flash_seg - write data into flash memory |
| 1123 | * @asd_ha: pointer to the host adapter structure |
| 1124 | * @src: pointer to the source data to be written |
| 1125 | * @dest_offset: offset from flash memory |
| 1126 | * @bytes_to_write: total bytes to write |
| 1127 | */ |
| 1128 | int asd_write_flash_seg(struct asd_ha_struct *asd_ha, |
David Woodhouse | 0bc202e | 2008-05-24 00:05:45 +0100 | [diff] [blame] | 1129 | const void *src, u32 dest_offset, u32 bytes_to_write) |
Gilbert Wu | 1237c98 | 2007-10-22 15:19:11 -0700 | [diff] [blame] | 1130 | { |
David Woodhouse | 0bc202e | 2008-05-24 00:05:45 +0100 | [diff] [blame] | 1131 | const u8 *src_buf; |
Gilbert Wu | 1237c98 | 2007-10-22 15:19:11 -0700 | [diff] [blame] | 1132 | u32 nv_offset, reg, i; |
| 1133 | int err; |
| 1134 | |
| 1135 | reg = asd_ha->hw_prof.flash.bar; |
| 1136 | src_buf = NULL; |
| 1137 | |
| 1138 | err = asd_check_flash_type(asd_ha); |
| 1139 | if (err) { |
| 1140 | ASD_DPRINTK("couldn't find the type of flash. err=%d\n", err); |
| 1141 | return err; |
| 1142 | } |
| 1143 | |
| 1144 | nv_offset = dest_offset; |
| 1145 | err = asd_erase_nv_sector(asd_ha, nv_offset, bytes_to_write); |
| 1146 | if (err) { |
| 1147 | ASD_DPRINTK("Erase failed at offset:0x%x\n", |
| 1148 | nv_offset); |
| 1149 | return err; |
| 1150 | } |
| 1151 | |
| 1152 | err = asd_reset_flash(asd_ha); |
| 1153 | if (err) { |
| 1154 | ASD_DPRINTK("couldn't reset flash. err=%d\n", err); |
| 1155 | return err; |
| 1156 | } |
| 1157 | |
David Woodhouse | 0bc202e | 2008-05-24 00:05:45 +0100 | [diff] [blame] | 1158 | src_buf = (const u8 *)src; |
Gilbert Wu | 1237c98 | 2007-10-22 15:19:11 -0700 | [diff] [blame] | 1159 | for (i = 0; i < bytes_to_write; i++) { |
| 1160 | /* Setup program command sequence */ |
| 1161 | switch (asd_ha->hw_prof.flash.method) { |
| 1162 | case FLASH_METHOD_A: |
| 1163 | { |
| 1164 | asd_write_reg_byte(asd_ha, |
| 1165 | (reg + 0xAAA), 0xAA); |
| 1166 | asd_write_reg_byte(asd_ha, |
| 1167 | (reg + 0x555), 0x55); |
| 1168 | asd_write_reg_byte(asd_ha, |
| 1169 | (reg + 0xAAA), 0xA0); |
| 1170 | asd_write_reg_byte(asd_ha, |
| 1171 | (reg + nv_offset + i), |
| 1172 | (*(src_buf + i))); |
| 1173 | break; |
| 1174 | } |
| 1175 | case FLASH_METHOD_B: |
| 1176 | { |
| 1177 | asd_write_reg_byte(asd_ha, |
| 1178 | (reg + 0x555), 0xAA); |
| 1179 | asd_write_reg_byte(asd_ha, |
| 1180 | (reg + 0x2AA), 0x55); |
| 1181 | asd_write_reg_byte(asd_ha, |
| 1182 | (reg + 0x555), 0xA0); |
| 1183 | asd_write_reg_byte(asd_ha, |
| 1184 | (reg + nv_offset + i), |
| 1185 | (*(src_buf + i))); |
| 1186 | break; |
| 1187 | } |
| 1188 | default: |
| 1189 | break; |
| 1190 | } |
| 1191 | if (asd_chk_write_status(asd_ha, |
| 1192 | (nv_offset + i), 0) != 0) { |
| 1193 | ASD_DPRINTK("aicx: Write failed at offset:0x%x\n", |
| 1194 | reg + nv_offset + i); |
| 1195 | return FAIL_WRITE_FLASH; |
| 1196 | } |
| 1197 | } |
| 1198 | |
| 1199 | err = asd_reset_flash(asd_ha); |
| 1200 | if (err) { |
| 1201 | ASD_DPRINTK("couldn't reset flash. err=%d\n", err); |
| 1202 | return err; |
| 1203 | } |
| 1204 | return 0; |
| 1205 | } |
| 1206 | |
| 1207 | int asd_chk_write_status(struct asd_ha_struct *asd_ha, |
| 1208 | u32 sector_addr, u8 erase_flag) |
| 1209 | { |
| 1210 | u32 reg; |
| 1211 | u32 loop_cnt; |
| 1212 | u8 nv_data1, nv_data2; |
| 1213 | u8 toggle_bit1; |
| 1214 | |
| 1215 | /* |
| 1216 | * Read from DQ2 requires sector address |
| 1217 | * while it's dont care for DQ6 |
| 1218 | */ |
| 1219 | reg = asd_ha->hw_prof.flash.bar; |
| 1220 | |
| 1221 | for (loop_cnt = 0; loop_cnt < 50000; loop_cnt++) { |
| 1222 | nv_data1 = asd_read_reg_byte(asd_ha, reg); |
| 1223 | nv_data2 = asd_read_reg_byte(asd_ha, reg); |
| 1224 | |
| 1225 | toggle_bit1 = ((nv_data1 & FLASH_STATUS_BIT_MASK_DQ6) |
| 1226 | ^ (nv_data2 & FLASH_STATUS_BIT_MASK_DQ6)); |
| 1227 | |
| 1228 | if (toggle_bit1 == 0) { |
| 1229 | return 0; |
| 1230 | } else { |
| 1231 | if (nv_data2 & FLASH_STATUS_BIT_MASK_DQ5) { |
| 1232 | nv_data1 = asd_read_reg_byte(asd_ha, |
| 1233 | reg); |
| 1234 | nv_data2 = asd_read_reg_byte(asd_ha, |
| 1235 | reg); |
| 1236 | toggle_bit1 = |
| 1237 | ((nv_data1 & FLASH_STATUS_BIT_MASK_DQ6) |
| 1238 | ^ (nv_data2 & FLASH_STATUS_BIT_MASK_DQ6)); |
| 1239 | |
| 1240 | if (toggle_bit1 == 0) |
| 1241 | return 0; |
| 1242 | } |
| 1243 | } |
| 1244 | |
| 1245 | /* |
| 1246 | * ERASE is a sector-by-sector operation and requires |
| 1247 | * more time to finish while WRITE is byte-byte-byte |
| 1248 | * operation and takes lesser time to finish. |
| 1249 | * |
| 1250 | * For some strange reason a reduced ERASE delay gives different |
| 1251 | * behaviour across different spirit boards. Hence we set |
| 1252 | * a optimum balance of 50mus for ERASE which works well |
| 1253 | * across all boards. |
| 1254 | */ |
| 1255 | if (erase_flag) { |
| 1256 | udelay(FLASH_STATUS_ERASE_DELAY_COUNT); |
| 1257 | } else { |
| 1258 | udelay(FLASH_STATUS_WRITE_DELAY_COUNT); |
| 1259 | } |
| 1260 | } |
| 1261 | return -1; |
| 1262 | } |
| 1263 | |
| 1264 | /** |
| 1265 | * asd_hwi_erase_nv_sector - Erase the flash memory sectors. |
| 1266 | * @asd_ha: pointer to the host adapter structure |
| 1267 | * @flash_addr: pointer to offset from flash memory |
| 1268 | * @size: total bytes to erase. |
| 1269 | */ |
| 1270 | int asd_erase_nv_sector(struct asd_ha_struct *asd_ha, u32 flash_addr, u32 size) |
| 1271 | { |
| 1272 | u32 reg; |
| 1273 | u32 sector_addr; |
| 1274 | |
| 1275 | reg = asd_ha->hw_prof.flash.bar; |
| 1276 | |
| 1277 | /* sector staring address */ |
| 1278 | sector_addr = flash_addr & FLASH_SECTOR_SIZE_MASK; |
| 1279 | |
| 1280 | /* |
| 1281 | * Erasing an flash sector needs to be done in six consecutive |
| 1282 | * write cyles. |
| 1283 | */ |
| 1284 | while (sector_addr < flash_addr+size) { |
| 1285 | switch (asd_ha->hw_prof.flash.method) { |
| 1286 | case FLASH_METHOD_A: |
| 1287 | asd_write_reg_byte(asd_ha, (reg + 0xAAA), 0xAA); |
| 1288 | asd_write_reg_byte(asd_ha, (reg + 0x555), 0x55); |
| 1289 | asd_write_reg_byte(asd_ha, (reg + 0xAAA), 0x80); |
| 1290 | asd_write_reg_byte(asd_ha, (reg + 0xAAA), 0xAA); |
| 1291 | asd_write_reg_byte(asd_ha, (reg + 0x555), 0x55); |
| 1292 | asd_write_reg_byte(asd_ha, (reg + sector_addr), 0x30); |
| 1293 | break; |
| 1294 | case FLASH_METHOD_B: |
| 1295 | asd_write_reg_byte(asd_ha, (reg + 0x555), 0xAA); |
| 1296 | asd_write_reg_byte(asd_ha, (reg + 0x2AA), 0x55); |
| 1297 | asd_write_reg_byte(asd_ha, (reg + 0x555), 0x80); |
| 1298 | asd_write_reg_byte(asd_ha, (reg + 0x555), 0xAA); |
| 1299 | asd_write_reg_byte(asd_ha, (reg + 0x2AA), 0x55); |
| 1300 | asd_write_reg_byte(asd_ha, (reg + sector_addr), 0x30); |
| 1301 | break; |
| 1302 | default: |
| 1303 | break; |
| 1304 | } |
| 1305 | |
| 1306 | if (asd_chk_write_status(asd_ha, sector_addr, 1) != 0) |
| 1307 | return FAIL_ERASE_FLASH; |
| 1308 | |
| 1309 | sector_addr += FLASH_SECTOR_SIZE; |
| 1310 | } |
| 1311 | |
| 1312 | return 0; |
| 1313 | } |
| 1314 | |
| 1315 | int asd_check_flash_type(struct asd_ha_struct *asd_ha) |
| 1316 | { |
| 1317 | u8 manuf_id; |
| 1318 | u8 dev_id; |
| 1319 | u8 sec_prot; |
| 1320 | u32 inc; |
| 1321 | u32 reg; |
| 1322 | int err; |
| 1323 | |
| 1324 | /* get Flash memory base address */ |
| 1325 | reg = asd_ha->hw_prof.flash.bar; |
| 1326 | |
| 1327 | /* Determine flash info */ |
| 1328 | err = asd_reset_flash(asd_ha); |
| 1329 | if (err) { |
| 1330 | ASD_DPRINTK("couldn't reset flash. err=%d\n", err); |
| 1331 | return err; |
| 1332 | } |
| 1333 | |
| 1334 | asd_ha->hw_prof.flash.method = FLASH_METHOD_UNKNOWN; |
| 1335 | asd_ha->hw_prof.flash.manuf = FLASH_MANUF_ID_UNKNOWN; |
| 1336 | asd_ha->hw_prof.flash.dev_id = FLASH_DEV_ID_UNKNOWN; |
| 1337 | |
| 1338 | /* Get flash info. This would most likely be AMD Am29LV family flash. |
| 1339 | * First try the sequence for word mode. It is the same as for |
| 1340 | * 008B (byte mode only), 160B (word mode) and 800D (word mode). |
| 1341 | */ |
| 1342 | inc = asd_ha->hw_prof.flash.wide ? 2 : 1; |
| 1343 | asd_write_reg_byte(asd_ha, reg + 0xAAA, 0xAA); |
| 1344 | asd_write_reg_byte(asd_ha, reg + 0x555, 0x55); |
| 1345 | asd_write_reg_byte(asd_ha, reg + 0xAAA, 0x90); |
| 1346 | manuf_id = asd_read_reg_byte(asd_ha, reg); |
| 1347 | dev_id = asd_read_reg_byte(asd_ha, reg + inc); |
| 1348 | sec_prot = asd_read_reg_byte(asd_ha, reg + inc + inc); |
| 1349 | /* Get out of autoselect mode. */ |
| 1350 | err = asd_reset_flash(asd_ha); |
| 1351 | if (err) { |
| 1352 | ASD_DPRINTK("couldn't reset flash. err=%d\n", err); |
| 1353 | return err; |
| 1354 | } |
| 1355 | ASD_DPRINTK("Flash MethodA manuf_id(0x%x) dev_id(0x%x) " |
| 1356 | "sec_prot(0x%x)\n", manuf_id, dev_id, sec_prot); |
| 1357 | err = asd_reset_flash(asd_ha); |
| 1358 | if (err != 0) |
| 1359 | return err; |
| 1360 | |
| 1361 | switch (manuf_id) { |
| 1362 | case FLASH_MANUF_ID_AMD: |
| 1363 | switch (sec_prot) { |
| 1364 | case FLASH_DEV_ID_AM29LV800DT: |
| 1365 | case FLASH_DEV_ID_AM29LV640MT: |
| 1366 | case FLASH_DEV_ID_AM29F800B: |
| 1367 | asd_ha->hw_prof.flash.method = FLASH_METHOD_A; |
| 1368 | break; |
| 1369 | default: |
| 1370 | break; |
| 1371 | } |
| 1372 | break; |
| 1373 | case FLASH_MANUF_ID_ST: |
| 1374 | switch (sec_prot) { |
| 1375 | case FLASH_DEV_ID_STM29W800DT: |
| 1376 | case FLASH_DEV_ID_STM29LV640: |
| 1377 | asd_ha->hw_prof.flash.method = FLASH_METHOD_A; |
| 1378 | break; |
| 1379 | default: |
| 1380 | break; |
| 1381 | } |
| 1382 | break; |
| 1383 | case FLASH_MANUF_ID_FUJITSU: |
| 1384 | switch (sec_prot) { |
| 1385 | case FLASH_DEV_ID_MBM29LV800TE: |
| 1386 | case FLASH_DEV_ID_MBM29DL800TA: |
| 1387 | asd_ha->hw_prof.flash.method = FLASH_METHOD_A; |
| 1388 | break; |
| 1389 | } |
| 1390 | break; |
| 1391 | case FLASH_MANUF_ID_MACRONIX: |
| 1392 | switch (sec_prot) { |
| 1393 | case FLASH_DEV_ID_MX29LV800BT: |
| 1394 | asd_ha->hw_prof.flash.method = FLASH_METHOD_A; |
| 1395 | break; |
| 1396 | } |
| 1397 | break; |
| 1398 | } |
| 1399 | |
| 1400 | if (asd_ha->hw_prof.flash.method == FLASH_METHOD_UNKNOWN) { |
| 1401 | err = asd_reset_flash(asd_ha); |
| 1402 | if (err) { |
| 1403 | ASD_DPRINTK("couldn't reset flash. err=%d\n", err); |
| 1404 | return err; |
| 1405 | } |
| 1406 | |
| 1407 | /* Issue Unlock sequence for AM29LV008BT */ |
| 1408 | asd_write_reg_byte(asd_ha, (reg + 0x555), 0xAA); |
| 1409 | asd_write_reg_byte(asd_ha, (reg + 0x2AA), 0x55); |
| 1410 | asd_write_reg_byte(asd_ha, (reg + 0x555), 0x90); |
| 1411 | manuf_id = asd_read_reg_byte(asd_ha, reg); |
| 1412 | dev_id = asd_read_reg_byte(asd_ha, reg + inc); |
| 1413 | sec_prot = asd_read_reg_byte(asd_ha, reg + inc + inc); |
| 1414 | |
| 1415 | ASD_DPRINTK("Flash MethodB manuf_id(0x%x) dev_id(0x%x) sec_prot" |
| 1416 | "(0x%x)\n", manuf_id, dev_id, sec_prot); |
| 1417 | |
| 1418 | err = asd_reset_flash(asd_ha); |
| 1419 | if (err != 0) { |
| 1420 | ASD_DPRINTK("couldn't reset flash. err=%d\n", err); |
| 1421 | return err; |
| 1422 | } |
| 1423 | |
| 1424 | switch (manuf_id) { |
| 1425 | case FLASH_MANUF_ID_AMD: |
| 1426 | switch (dev_id) { |
| 1427 | case FLASH_DEV_ID_AM29LV008BT: |
| 1428 | asd_ha->hw_prof.flash.method = FLASH_METHOD_B; |
| 1429 | break; |
| 1430 | default: |
| 1431 | break; |
| 1432 | } |
| 1433 | break; |
| 1434 | case FLASH_MANUF_ID_ST: |
| 1435 | switch (dev_id) { |
| 1436 | case FLASH_DEV_ID_STM29008: |
| 1437 | asd_ha->hw_prof.flash.method = FLASH_METHOD_B; |
| 1438 | break; |
| 1439 | default: |
| 1440 | break; |
| 1441 | } |
| 1442 | break; |
| 1443 | case FLASH_MANUF_ID_FUJITSU: |
| 1444 | switch (dev_id) { |
| 1445 | case FLASH_DEV_ID_MBM29LV008TA: |
| 1446 | asd_ha->hw_prof.flash.method = FLASH_METHOD_B; |
| 1447 | break; |
| 1448 | } |
| 1449 | break; |
| 1450 | case FLASH_MANUF_ID_INTEL: |
| 1451 | switch (dev_id) { |
| 1452 | case FLASH_DEV_ID_I28LV00TAT: |
| 1453 | asd_ha->hw_prof.flash.method = FLASH_METHOD_B; |
| 1454 | break; |
| 1455 | } |
| 1456 | break; |
| 1457 | case FLASH_MANUF_ID_MACRONIX: |
| 1458 | switch (dev_id) { |
| 1459 | case FLASH_DEV_ID_I28LV00TAT: |
| 1460 | asd_ha->hw_prof.flash.method = FLASH_METHOD_B; |
| 1461 | break; |
| 1462 | } |
| 1463 | break; |
| 1464 | default: |
| 1465 | return FAIL_FIND_FLASH_ID; |
| 1466 | } |
| 1467 | } |
| 1468 | |
| 1469 | if (asd_ha->hw_prof.flash.method == FLASH_METHOD_UNKNOWN) |
| 1470 | return FAIL_FIND_FLASH_ID; |
| 1471 | |
| 1472 | asd_ha->hw_prof.flash.manuf = manuf_id; |
| 1473 | asd_ha->hw_prof.flash.dev_id = dev_id; |
| 1474 | asd_ha->hw_prof.flash.sec_prot = sec_prot; |
| 1475 | return 0; |
| 1476 | } |