Alessandro Rubini | 6c62a89 | 2013-06-18 23:47:35 +0200 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (C) 2012 CERN (www.cern.ch) |
| 3 | * Author: Alessandro Rubini <rubini@gnudd.com> |
| 4 | * |
| 5 | * Permission to use, copy, modify, and/or distribute this software for any |
| 6 | * purpose with or without fee is hereby granted, provided that the above |
| 7 | * copyright notice and this permission notice appear in all copies. |
| 8 | * |
| 9 | * The software is provided "as is"; the copyright holders disclaim |
| 10 | * all warranties and liabilities, to the extent permitted by |
| 11 | * applicable law. |
| 12 | */ |
| 13 | #include <linux/module.h> |
| 14 | #include <linux/init.h> |
| 15 | #include <linux/string.h> |
| 16 | #include <linux/device.h> |
| 17 | #include <linux/slab.h> |
| 18 | #include <linux/firmware.h> |
| 19 | #include <linux/workqueue.h> |
| 20 | #include <linux/err.h> |
| 21 | #include <linux/fmc.h> |
| 22 | |
| 23 | #define FF_EEPROM_SIZE 8192 /* The standard eeprom size */ |
| 24 | #define FF_MAX_MEZZANINES 4 /* Fakes a multi-mezzanine carrier */ |
| 25 | |
| 26 | /* The user can pass up to 4 names of eeprom images to load */ |
| 27 | static char *ff_eeprom[FF_MAX_MEZZANINES]; |
| 28 | static int ff_nr_eeprom; |
| 29 | module_param_array_named(eeprom, ff_eeprom, charp, &ff_nr_eeprom, 0444); |
| 30 | |
| 31 | /* The user can ask for a multi-mezzanine carrier, with the default eeprom */ |
| 32 | static int ff_nr_dev = 1; |
| 33 | module_param_named(ndev, ff_nr_dev, int, 0444); |
| 34 | |
| 35 | |
| 36 | /* Lazily, don't support the "standard" module parameters */ |
| 37 | |
| 38 | /* |
| 39 | * Eeprom built from these commands: |
| 40 | |
| 41 | ../fru-generator -v fake-vendor -n fake-design-for-testing \ |
| 42 | -s 01234 -p none > IPMI-FRU |
| 43 | |
| 44 | gensdbfs . ../fake-eeprom.bin |
| 45 | */ |
| 46 | static char ff_eeimg[FF_MAX_MEZZANINES][FF_EEPROM_SIZE] = { |
| 47 | { |
| 48 | 0x01, 0x00, 0x00, 0x01, 0x00, 0x0c, 0x00, 0xf2, 0x01, 0x0b, 0x00, 0xb2, |
| 49 | 0x86, 0x87, 0xcb, 0x66, 0x61, 0x6b, 0x65, 0x2d, 0x76, 0x65, 0x6e, 0x64, |
| 50 | 0x6f, 0x72, 0xd7, 0x66, 0x61, 0x6b, 0x65, 0x2d, 0x64, 0x65, 0x73, 0x69, |
| 51 | 0x67, 0x6e, 0x2d, 0x66, 0x6f, 0x72, 0x2d, 0x74, 0x65, 0x73, 0x74, 0x69, |
| 52 | 0x6e, 0x67, 0xc5, 0x30, 0x31, 0x32, 0x33, 0x34, 0xc4, 0x6e, 0x6f, 0x6e, |
| 53 | 0x65, 0xda, 0x32, 0x30, 0x31, 0x32, 0x2d, 0x31, 0x31, 0x2d, 0x31, 0x39, |
| 54 | 0x20, 0x32, 0x32, 0x3a, 0x34, 0x32, 0x3a, 0x33, 0x30, 0x2e, 0x30, 0x37, |
| 55 | 0x34, 0x30, 0x35, 0x35, 0xc1, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x87, |
| 56 | 0x02, 0x02, 0x0d, 0xf7, 0xf8, 0x02, 0xb0, 0x04, 0x74, 0x04, 0xec, 0x04, |
| 57 | 0x00, 0x00, 0x00, 0x00, 0xe8, 0x03, 0x02, 0x02, 0x0d, 0x5c, 0x93, 0x01, |
| 58 | 0x4a, 0x01, 0x39, 0x01, 0x5a, 0x01, 0x00, 0x00, 0x00, 0x00, 0xb8, 0x0b, |
| 59 | 0x02, 0x02, 0x0d, 0x63, 0x8c, 0x00, 0xfa, 0x00, 0xed, 0x00, 0x06, 0x01, |
| 60 | 0x00, 0x00, 0x00, 0x00, 0xa0, 0x0f, 0x01, 0x02, 0x0d, 0xfb, 0xf5, 0x05, |
| 61 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 62 | 0x01, 0x02, 0x0d, 0xfc, 0xf4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 63 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x02, 0x0d, 0xfd, 0xf3, 0x03, |
| 64 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 65 | 0xfa, 0x82, 0x0b, 0xea, 0x8f, 0xa2, 0x12, 0x00, 0x00, 0x1e, 0x44, 0x00, |
| 66 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 67 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 68 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 69 | 0x00, 0x00, 0x00, 0x00, 0x53, 0x44, 0x42, 0x2d, 0x00, 0x03, 0x01, 0x01, |
| 70 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 71 | 0x00, 0x00, 0x01, 0xc4, 0x46, 0x69, 0x6c, 0x65, 0x44, 0x61, 0x74, 0x61, |
| 72 | 0x2e, 0x20, 0x20, 0x20, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, |
| 73 | 0x2e, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, |
| 74 | 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 75 | 0x00, 0x00, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0xc0, |
| 76 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0xc4, 0x46, 0x69, 0x6c, 0x65, |
| 77 | 0x44, 0x61, 0x74, 0x61, 0x6e, 0x61, 0x6d, 0x65, 0x00, 0x00, 0x00, 0x01, |
| 78 | 0x00, 0x00, 0x00, 0x00, 0x6e, 0x61, 0x6d, 0x65, 0x20, 0x20, 0x20, 0x20, |
| 79 | 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x01, |
| 80 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, |
| 81 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xdf, |
| 82 | 0x46, 0x69, 0x6c, 0x65, 0x44, 0x61, 0x74, 0x61, 0x49, 0x50, 0x4d, 0x49, |
| 83 | 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x49, 0x50, 0x4d, 0x49, |
| 84 | 0x2d, 0x46, 0x52, 0x55, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, |
| 85 | 0x20, 0x20, 0x20, 0x01, 0x66, 0x61, 0x6b, 0x65, 0x0a, |
| 86 | }, |
| 87 | }; |
| 88 | |
| 89 | struct ff_dev { |
| 90 | struct fmc_device *fmc[FF_MAX_MEZZANINES]; |
| 91 | struct device dev; |
| 92 | }; |
| 93 | |
| 94 | static struct ff_dev *ff_current_dev; /* We have 1 carrier, 1 slot */ |
| 95 | |
| 96 | static int ff_reprogram(struct fmc_device *fmc, struct fmc_driver *drv, |
| 97 | char *gw) |
| 98 | { |
| 99 | const struct firmware *fw; |
| 100 | int ret; |
| 101 | |
| 102 | if (!gw) { |
| 103 | /* program golden: success */ |
| 104 | fmc->flags &= ~FMC_DEVICE_HAS_CUSTOM; |
| 105 | fmc->flags |= FMC_DEVICE_HAS_GOLDEN; |
| 106 | return 0; |
| 107 | } |
| 108 | |
| 109 | dev_info(&fmc->dev, "reprogramming with %s\n", gw); |
| 110 | ret = request_firmware(&fw, gw, &fmc->dev); |
| 111 | if (ret < 0) { |
| 112 | dev_warn(&fmc->dev, "request firmware \"%s\": error %i\n", |
| 113 | gw, ret); |
| 114 | goto out; |
| 115 | } |
| 116 | fmc->flags &= ~FMC_DEVICE_HAS_GOLDEN; |
| 117 | fmc->flags |= FMC_DEVICE_HAS_CUSTOM; |
| 118 | |
| 119 | out: |
| 120 | release_firmware(fw); |
| 121 | return ret; |
| 122 | } |
| 123 | |
| 124 | static int ff_irq_request(struct fmc_device *fmc, irq_handler_t handler, |
| 125 | char *name, int flags) |
| 126 | { |
| 127 | return -EOPNOTSUPP; |
| 128 | } |
| 129 | |
| 130 | /* FIXME: should also have some fake FMC GPIO mapping */ |
| 131 | |
| 132 | |
| 133 | /* |
| 134 | * This work function is called when we changed the eeprom. It removes the |
| 135 | * current fmc device and registers a new one, with different identifiers. |
| 136 | */ |
| 137 | static struct ff_dev *ff_dev_create(void); /* defined later */ |
| 138 | |
| 139 | static void ff_work_fn(struct work_struct *work) |
| 140 | { |
| 141 | struct ff_dev *ff = ff_current_dev; |
| 142 | int ret; |
| 143 | |
| 144 | fmc_device_unregister_n(ff->fmc, ff_nr_dev); |
| 145 | device_unregister(&ff->dev); |
| 146 | ff_current_dev = NULL; |
| 147 | |
| 148 | ff = ff_dev_create(); |
| 149 | if (IS_ERR(ff)) { |
| 150 | pr_warning("%s: can't re-create FMC devices\n", __func__); |
| 151 | return; |
| 152 | } |
| 153 | ret = fmc_device_register_n(ff->fmc, ff_nr_dev); |
| 154 | if (ret < 0) { |
| 155 | dev_warn(&ff->dev, "can't re-register FMC devices\n"); |
| 156 | device_unregister(&ff->dev); |
| 157 | return; |
| 158 | } |
| 159 | |
| 160 | ff_current_dev = ff; |
| 161 | } |
| 162 | |
| 163 | static DECLARE_DELAYED_WORK(ff_work, ff_work_fn); |
| 164 | |
| 165 | |
| 166 | /* low-level i2c */ |
| 167 | static int ff_eeprom_read(struct fmc_device *fmc, uint32_t offset, |
| 168 | void *buf, size_t size) |
| 169 | { |
| 170 | if (offset > FF_EEPROM_SIZE) |
| 171 | return -EINVAL; |
| 172 | if (offset + size > FF_EEPROM_SIZE) |
| 173 | size = FF_EEPROM_SIZE - offset; |
| 174 | memcpy(buf, fmc->eeprom + offset, size); |
| 175 | return size; |
| 176 | } |
| 177 | |
| 178 | static int ff_eeprom_write(struct fmc_device *fmc, uint32_t offset, |
| 179 | const void *buf, size_t size) |
| 180 | { |
| 181 | if (offset > FF_EEPROM_SIZE) |
| 182 | return -EINVAL; |
| 183 | if (offset + size > FF_EEPROM_SIZE) |
| 184 | size = FF_EEPROM_SIZE - offset; |
| 185 | dev_info(&fmc->dev, "write_eeprom: offset %i, size %zi\n", |
| 186 | (int)offset, size); |
| 187 | memcpy(fmc->eeprom + offset, buf, size); |
| 188 | schedule_delayed_work(&ff_work, HZ * 2); /* remove, replug, in 2s */ |
| 189 | return size; |
| 190 | } |
| 191 | |
| 192 | /* i2c operations for fmc */ |
| 193 | static int ff_read_ee(struct fmc_device *fmc, int pos, void *data, int len) |
| 194 | { |
| 195 | if (!(fmc->flags & FMC_DEVICE_HAS_GOLDEN)) |
| 196 | return -EOPNOTSUPP; |
| 197 | return ff_eeprom_read(fmc, pos, data, len); |
| 198 | } |
| 199 | |
| 200 | static int ff_write_ee(struct fmc_device *fmc, int pos, |
| 201 | const void *data, int len) |
| 202 | { |
| 203 | if (!(fmc->flags & FMC_DEVICE_HAS_GOLDEN)) |
| 204 | return -EOPNOTSUPP; |
| 205 | return ff_eeprom_write(fmc, pos, data, len); |
| 206 | } |
| 207 | |
| 208 | /* readl and writel do not do anything. Don't waste RAM with "base" */ |
| 209 | static uint32_t ff_readl(struct fmc_device *fmc, int offset) |
| 210 | { |
| 211 | return 0; |
| 212 | } |
| 213 | |
| 214 | static void ff_writel(struct fmc_device *fmc, uint32_t value, int offset) |
| 215 | { |
| 216 | return; |
| 217 | } |
| 218 | |
| 219 | /* validate is useful so fmc-write-eeprom will not reprogram every 2 seconds */ |
| 220 | static int ff_validate(struct fmc_device *fmc, struct fmc_driver *drv) |
| 221 | { |
| 222 | int i; |
| 223 | |
| 224 | if (!drv->busid_n) |
| 225 | return 0; /* everyhing is valid */ |
| 226 | for (i = 0; i < drv->busid_n; i++) |
| 227 | if (drv->busid_val[i] == fmc->device_id) |
| 228 | return i; |
| 229 | return -ENOENT; |
| 230 | } |
| 231 | |
| 232 | |
| 233 | |
| 234 | static struct fmc_operations ff_fmc_operations = { |
Arnd Bergmann | c2955da | 2013-06-19 12:49:30 +0200 | [diff] [blame] | 235 | .read32 = ff_readl, |
| 236 | .write32 = ff_writel, |
Alessandro Rubini | 6c62a89 | 2013-06-18 23:47:35 +0200 | [diff] [blame] | 237 | .reprogram = ff_reprogram, |
| 238 | .irq_request = ff_irq_request, |
| 239 | .read_ee = ff_read_ee, |
| 240 | .write_ee = ff_write_ee, |
| 241 | .validate = ff_validate, |
| 242 | }; |
| 243 | |
| 244 | /* This device is kmalloced: release it */ |
| 245 | static void ff_dev_release(struct device *dev) |
| 246 | { |
| 247 | struct ff_dev *ff = container_of(dev, struct ff_dev, dev); |
| 248 | kfree(ff); |
| 249 | } |
| 250 | |
| 251 | static struct fmc_device ff_template_fmc = { |
| 252 | .version = FMC_VERSION, |
| 253 | .owner = THIS_MODULE, |
| 254 | .carrier_name = "fake-fmc-carrier", |
| 255 | .device_id = 0xf001, /* fool */ |
| 256 | .eeprom_len = sizeof(ff_eeimg[0]), |
| 257 | .memlen = 0x1000, /* 4k, to show something */ |
| 258 | .op = &ff_fmc_operations, |
| 259 | .hwdev = NULL, /* filled at creation time */ |
| 260 | .flags = FMC_DEVICE_HAS_GOLDEN, |
| 261 | }; |
| 262 | |
| 263 | static struct ff_dev *ff_dev_create(void) |
| 264 | { |
| 265 | struct ff_dev *ff; |
| 266 | struct fmc_device *fmc; |
| 267 | int i, ret; |
| 268 | |
| 269 | ff = kzalloc(sizeof(*ff), GFP_KERNEL); |
| 270 | if (!ff) |
| 271 | return ERR_PTR(-ENOMEM); |
| 272 | dev_set_name(&ff->dev, "fake-fmc-carrier"); |
| 273 | ff->dev.release = ff_dev_release; |
| 274 | |
| 275 | ret = device_register(&ff->dev); |
| 276 | if (ret < 0) { |
| 277 | put_device(&ff->dev); |
| 278 | return ERR_PTR(ret); |
| 279 | } |
| 280 | |
| 281 | /* Create fmc structures that refer to this new "hw" device */ |
| 282 | for (i = 0; i < ff_nr_dev; i++) { |
| 283 | fmc = kmemdup(&ff_template_fmc, sizeof(ff_template_fmc), |
| 284 | GFP_KERNEL); |
| 285 | fmc->hwdev = &ff->dev; |
| 286 | fmc->carrier_data = ff; |
| 287 | fmc->nr_slots = ff_nr_dev; |
| 288 | /* the following fields are different for each slot */ |
| 289 | fmc->eeprom = ff_eeimg[i]; |
| 290 | fmc->eeprom_addr = 0x50 + 2 * i; |
| 291 | fmc->slot_id = i; |
| 292 | ff->fmc[i] = fmc; |
| 293 | /* increment the identifier, each must be different */ |
| 294 | ff_template_fmc.device_id++; |
| 295 | } |
| 296 | return ff; |
| 297 | } |
| 298 | |
| 299 | /* init and exit */ |
| 300 | static int ff_init(void) |
| 301 | { |
| 302 | struct ff_dev *ff; |
| 303 | const struct firmware *fw; |
| 304 | int i, len, ret = 0; |
| 305 | |
| 306 | /* Replicate the default eeprom for the max number of mezzanines */ |
| 307 | for (i = 1; i < FF_MAX_MEZZANINES; i++) |
| 308 | memcpy(ff_eeimg[i], ff_eeimg[0], sizeof(ff_eeimg[0])); |
| 309 | |
| 310 | if (ff_nr_eeprom > ff_nr_dev) |
| 311 | ff_nr_dev = ff_nr_eeprom; |
| 312 | |
| 313 | ff = ff_dev_create(); |
| 314 | if (IS_ERR(ff)) |
| 315 | return PTR_ERR(ff); |
| 316 | |
| 317 | /* If the user passed "eeprom=" as a parameter, fetch them */ |
| 318 | for (i = 0; i < ff_nr_eeprom; i++) { |
| 319 | if (!strlen(ff_eeprom[i])) |
| 320 | continue; |
| 321 | ret = request_firmware(&fw, ff_eeprom[i], &ff->dev); |
| 322 | if (ret < 0) { |
| 323 | dev_err(&ff->dev, "Mezzanine %i: can't load \"%s\" " |
| 324 | "(error %i)\n", i, ff_eeprom[i], -ret); |
| 325 | } else { |
| 326 | len = min_t(size_t, fw->size, (size_t)FF_EEPROM_SIZE); |
| 327 | memcpy(ff_eeimg[i], fw->data, len); |
| 328 | release_firmware(fw); |
| 329 | dev_info(&ff->dev, "Mezzanine %i: eeprom \"%s\"\n", i, |
| 330 | ff_eeprom[i]); |
| 331 | } |
| 332 | } |
| 333 | |
| 334 | ret = fmc_device_register_n(ff->fmc, ff_nr_dev); |
| 335 | if (ret) { |
| 336 | device_unregister(&ff->dev); |
| 337 | return ret; |
| 338 | } |
| 339 | ff_current_dev = ff; |
| 340 | return ret; |
| 341 | } |
| 342 | |
| 343 | static void ff_exit(void) |
| 344 | { |
| 345 | if (ff_current_dev) { |
| 346 | fmc_device_unregister_n(ff_current_dev->fmc, ff_nr_dev); |
| 347 | device_unregister(&ff_current_dev->dev); |
| 348 | } |
| 349 | cancel_delayed_work_sync(&ff_work); |
| 350 | } |
| 351 | |
| 352 | module_init(ff_init); |
| 353 | module_exit(ff_exit); |
| 354 | |
| 355 | MODULE_LICENSE("Dual BSD/GPL"); |