Gitiles
Code Review Sign In
gerrit-public.fairphone.software / kernel / msm-4.9 / 6ae23ad36253a8033c5714c52b691b84456487c5 / . / arch / arm / mach-s3c64xx / Kconfig
blob: 28c7097e85066f5780c1f9b55492cfad5cd86c1d [file] [log] [blame]
Ben Dooksa08ab632008-10-21 14:06:39 +0100[diff] [blame]1# Copyright 2008 Openmoko, Inc.
Ben Dooks431107e2010-01-26 10:11:04 +0900[diff] [blame]2# Simtec Electronics, Ben Dooks <ben@simtec.co.uk>
Ben Dooksa08ab632008-10-21 14:06:39 +0100[diff] [blame]3#
4# Licensed under GPLv2
5
Tomasz Figad2193ce2013-10-06 08:58:40 +0900[diff] [blame]6if ARCH_S3C64XX
7
Ben Dooksa08ab632008-10-21 14:06:39 +0100[diff] [blame]8# Configuration options for the S3C6410 CPU
Ben Dooksd626aee2008-10-21 14:06:50 +0100[diff] [blame]9
Ben Dooks431107e2010-01-26 10:11:04 +0900[diff] [blame]10config CPU_S3C6400
11 bool
Ben Dooks431107e2010-01-26 10:11:04 +0900[diff] [blame]12 help
13 Enable S3C6400 CPU support
14
Ben Dooksd626aee2008-10-21 14:06:50 +0100[diff] [blame]15config CPU_S3C6410
16 bool
17 help
18 Enable S3C6410 CPU support
19
Tomasz Figa1db02872013-10-16 21:10:54 +0200[diff] [blame]20config S3C64XX_PL080
Arnd Bergmann27873b02014-06-13 12:04:39 +0200[diff] [blame]21 def_bool DMADEVICES
22 select ARM_AMBA
Tomasz Figa1db02872013-10-16 21:10:54 +0200[diff] [blame]23 select AMBA_PL08X
Ben Dooksf7be9ab2010-01-26 13:41:30 +0900[diff] [blame]24
Ben Dooks2f6c2ac2010-01-26 10:38:52 +0900[diff] [blame]25config S3C64XX_SETUP_SDHCI
Ben Dooks2f6c2ac2010-01-26 10:38:52 +0900[diff] [blame]26 bool
Russell Kingb1b3f492012-10-06 17:12:25 +0100[diff] [blame]27 select S3C64XX_SETUP_SDHCI_GPIO
Ben Dooks5cc7fd82008-10-31 16:14:38 +0000[diff] [blame]28 help
Ben Dooks2f6c2ac2010-01-26 10:38:52 +0900[diff] [blame]29 Internal configuration for default SDHCI setup for S3C6400 and
30 S3C6410 SoCs.
Ben Dooks5cc7fd82008-10-31 16:14:38 +0000[diff] [blame]31
Marek Szyprowski999304b2010-05-20 08:59:05 +0200[diff] [blame]32config S3C64XX_DEV_ONENAND1
33 bool
34 help
35 Compile in platform device definition for OneNAND1 controller
36
Kukjin Kim7f798c12015-07-30 01:48:17 +0900[diff] [blame]37config SAMSUNG_DEV_BACKLIGHT
38 bool
39 depends on SAMSUNG_DEV_PWM
40 help
41 Compile in platform device definition LCD backlight with PWM Timer
42
Ben Dooks88fc68a2010-01-26 11:19:18 +0900[diff] [blame]43# platform specific device setup
44
45config S3C64XX_SETUP_I2C0
46 bool
47 default y
48 help
49 Common setup code for i2c bus 0.
50
51 Note, currently since i2c0 is always compiled, this setup helper
52 is always compiled with it.
53
54config S3C64XX_SETUP_I2C1
55 bool
56 help
57 Common setup code for i2c bus 1.
58
Abhilash Kesavan0ab0b6d2010-06-08 16:55:45 +0900[diff] [blame]59config S3C64XX_SETUP_IDE
60 bool
61 help
62 Common setup code for S3C64XX IDE.
63
Ben Dooks88fc68a2010-01-26 11:19:18 +0900[diff] [blame]64config S3C64XX_SETUP_FB_24BPP
65 bool
66 help
67 Common setup code for S3C64XX with an 24bpp RGB display helper.
68
Naveen Krishna Ch290d0982010-06-22 07:39:18 +0900[diff] [blame]69config S3C64XX_SETUP_KEYPAD
70 bool
71 help
72 Common setup code for S3C64XX KEYPAD GPIO configurations
73
Ben Dooks88fc68a2010-01-26 11:19:18 +0900[diff] [blame]74config S3C64XX_SETUP_SDHCI_GPIO
75 bool
76 help
77 Common setup code for S3C64XX SDHCI GPIO configurations
78
Padmavathi Venna4566c7f2011-12-23 10:14:36 +0900[diff] [blame]79config S3C64XX_SETUP_SPI
80 bool
81 help
82 Common setup code for SPI GPIO configurations
83
Joonyoung Shim99f6e1f2012-03-07 04:23:47 -0800[diff] [blame]84config S3C64XX_SETUP_USB_PHY
85 bool
86 help
87 Common setup code for USB PHY controller
88
Ben Dooks431107e2010-01-26 10:11:04 +0900[diff] [blame]89# S36400 Macchine support
90
91config MACH_SMDK6400
92 bool "SMDK6400"
93 select CPU_S3C6400
Russell Kingb1b3f492012-10-06 17:12:25 +0100[diff] [blame]94 select S3C64XX_SETUP_SDHCI
Arnd Bergmannb25a1b62014-02-26 21:31:18 +0100[diff] [blame]95 select S3C_DEV_HSMMC1
Ben Dooks431107e2010-01-26 10:11:04 +0900[diff] [blame]96 help
97 Machine support for the Samsung SMDK6400
98
99# S3C6410 machine support
100
Kwangwoo Lee1f26a8a2009-04-28 10:35:57 +0900[diff] [blame]101config MACH_ANW6410
102 bool "A&W6410"
103 select CPU_S3C6410
Kwangwoo Lee1f26a8a2009-04-28 10:35:57 +0900[diff] [blame]104 select S3C64XX_SETUP_FB_24BPP
Russell Kingb1b3f492012-10-06 17:12:25 +0100[diff] [blame]105 select S3C_DEV_FB
Kwangwoo Lee1f26a8a2009-04-28 10:35:57 +0900[diff] [blame]106 help
107 Machine support for the A&W6410
108
Darius Augulise9debd92010-10-21 07:42:29 +0900[diff] [blame]109config MACH_MINI6410
110 bool "MINI6410"
111 select CPU_S3C6410
Russell Kingb1b3f492012-10-06 17:12:25 +0100[diff] [blame]112 select S3C64XX_SETUP_FB_24BPP
113 select S3C64XX_SETUP_SDHCI
114 select S3C_DEV_FB
Darius Augulise9debd92010-10-21 07:42:29 +0900[diff] [blame]115 select S3C_DEV_HSMMC
116 select S3C_DEV_HSMMC1
Darius Augulis1c5d76e2010-10-19 16:04:16 +0900[diff] [blame]117 select S3C_DEV_NAND
Russell Kingb1b3f492012-10-06 17:12:25 +0100[diff] [blame]118 select S3C_DEV_USB_HOST
Darius Augulisfe894f92010-10-19 16:10:02 +0900[diff] [blame]119 select SAMSUNG_DEV_ADC
120 select SAMSUNG_DEV_TS
Darius Augulise9debd92010-10-21 07:42:29 +0900[diff] [blame]121 help
122 Machine support for the FriendlyARM MINI6410
123
Darius Auguliseab5cfa2010-07-28 23:03:43 +0300[diff] [blame]124config MACH_REAL6410
125 bool "REAL6410"
126 select CPU_S3C6410
Russell Kingb1b3f492012-10-06 17:12:25 +0100[diff] [blame]127 select S3C64XX_SETUP_FB_24BPP
Darius Augulisce611d72010-08-02 01:39:25 +0300[diff] [blame]128 select S3C64XX_SETUP_SDHCI
Darius Augulisc115f67c2010-10-19 13:52:29 +0900[diff] [blame]129 select S3C_DEV_FB
Russell Kingb1b3f492012-10-06 17:12:25 +0100[diff] [blame]130 select S3C_DEV_HSMMC
131 select S3C_DEV_HSMMC1
Darius Augulis88fbade2010-10-19 13:52:32 +0900[diff] [blame]132 select S3C_DEV_NAND
Russell Kingb1b3f492012-10-06 17:12:25 +0100[diff] [blame]133 select S3C_DEV_USB_HOST
Darius Augulis4374c452010-10-19 13:52:34 +0900[diff] [blame]134 select SAMSUNG_DEV_ADC
135 select SAMSUNG_DEV_TS
Darius Auguliseab5cfa2010-07-28 23:03:43 +0300[diff] [blame]136 help
137 Machine support for the CoreWind REAL6410
138
Ben Dooks5718df92008-10-21 14:07:09 +0100[diff] [blame]139config MACH_SMDK6410
140 bool "SMDK6410"
141 select CPU_S3C6410
Russell Kingb1b3f492012-10-06 17:12:25 +0100[diff] [blame]142 select HAVE_S3C2410_WATCHDOG if WATCHDOG
143 select S3C64XX_SETUP_FB_24BPP
144 select S3C64XX_SETUP_I2C1
145 select S3C64XX_SETUP_IDE
146 select S3C64XX_SETUP_KEYPAD
147 select S3C64XX_SETUP_SDHCI
148 select S3C64XX_SETUP_USB_PHY
149 select S3C_DEV_FB
Ben Dooks5b323c72008-10-31 16:14:28 +0000[diff] [blame]150 select S3C_DEV_HSMMC
Ben Dooksb24636c2008-11-03 20:14:53 +0000[diff] [blame]151 select S3C_DEV_HSMMC1
Ben Dooksd7ea3742008-10-31 16:14:57 +0000[diff] [blame]152 select S3C_DEV_I2C1
Atul Dahiya9bbf4a62010-07-20 16:31:32 +0530[diff] [blame]153 select S3C_DEV_RTC
Ben Dooks98fd63b2009-03-06 19:49:49 +0000[diff] [blame]154 select S3C_DEV_USB_HOST
Ben Dooks06fa1d32009-05-16 22:11:20 +0100[diff] [blame]155 select S3C_DEV_USB_HSOTG
Banajit Goswamib351c4a2010-05-20 16:21:30 +0900[diff] [blame]156 select S3C_DEV_WDT
Russell Kingb1b3f492012-10-06 17:12:25 +0100[diff] [blame]157 select SAMSUNG_DEV_ADC
Banajit Goswami96d78682011-07-20 23:45:22 +0900[diff] [blame]158 select SAMSUNG_DEV_BACKLIGHT
Russell Kingb1b3f492012-10-06 17:12:25 +0100[diff] [blame]159 select SAMSUNG_DEV_IDE
Naveen Krishna Ch290d0982010-06-22 07:39:18 +0900[diff] [blame]160 select SAMSUNG_DEV_KEYPAD
Banajit Goswami075d1082011-02-28 17:42:35 +0530[diff] [blame]161 select SAMSUNG_DEV_PWM
Russell Kingb1b3f492012-10-06 17:12:25 +0100[diff] [blame]162 select SAMSUNG_DEV_TS
Ben Dooks5718df92008-10-21 14:07:09 +0100[diff] [blame]163 help
164 Machine support for the Samsung SMDK6410
Ben Dooksb24636c2008-11-03 20:14:53 +0000[diff] [blame]165
166# At least some of the SMDK6410s were shipped with the card detect
167# for the MMC/SD slots connected to the same input. This means that
168# either the boards need to be altered to have channel0 to an alternate
169# configuration or that only one slot can be used.
170
171choice
172 prompt "SMDK6410 MMC/SD slot setup"
173 depends on MACH_SMDK6410
174
175config SMDK6410_SD_CH0
176 bool "Use channel 0 only"
177 depends on MACH_SMDK6410
178 help
179 Select CON7 (channel 0) as the MMC/SD slot, as
180 at least some SMDK6410 boards come with the
181 resistors fitted so that the card detects for
182 channels 0 and 1 are the same.
Ben Dooks431107e2010-01-26 10:11:04 +0900[diff] [blame]183
Ben Dooksb24636c2008-11-03 20:14:53 +0000[diff] [blame]184config SMDK6410_SD_CH1
185 bool "Use channel 1 only"
186 depends on MACH_SMDK6410
187 help
188 Select CON6 (channel 1) as the MMC/SD slot, as
189 at least some SMDK6410 boards come with the
190 resistors fitted so that the card detects for
191 channels 0 and 1 are the same.
192
193endchoice
Mark Brownecc558a2009-02-17 15:59:38 +0000[diff] [blame]194
195config SMDK6410_WM1190_EV1
196 bool "Support Wolfson Microelectronics 1190-EV1 PMIC card"
197 depends on MACH_SMDK6410
Arnd Bergmann261592e2015-02-27 05:50:21 +0900[diff] [blame]198 depends on I2C=y
Russell Kingb1b3f492012-10-06 17:12:25 +0100[diff] [blame]199 select MFD_WM8350_I2C
Mark Brownecc558a2009-02-17 15:59:38 +0000[diff] [blame]200 select REGULATOR
201 select REGULATOR_WM8350
Mark Brownecc558a2009-02-17 15:59:38 +0000[diff] [blame]202 help
203 The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC
204 and audio daughtercard for the Samsung SMDK6410 reference
205 platform. Enabling this option will build support for this
206 module into the kernel. The presence of the module will be
Masanari Iida59bf8962012-04-18 00:01:21 +0900[diff] [blame]207 detected at runtime so the resulting kernel can be used
Mark Brownecc558a2009-02-17 15:59:38 +0000[diff] [blame]208 with or without the 1190-EV1 fitted.
Kyungmin Park87c41222009-03-11 11:05:55 +0900[diff] [blame]209
Mark Brown60f91012010-02-17 18:19:29 +0000[diff] [blame]210config SMDK6410_WM1192_EV1
211 bool "Support Wolfson Microelectronics 1192-EV1 PMIC card"
212 depends on MACH_SMDK6410
Arnd Bergmann261592e2015-02-27 05:50:21 +0900[diff] [blame]213 depends on I2C=y
Russell Kingb1b3f492012-10-06 17:12:25 +0100[diff] [blame]214 select MFD_WM831X
215 select MFD_WM831X_I2C
Mark Brown60f91012010-02-17 18:19:29 +0000[diff] [blame]216 select REGULATOR
217 select REGULATOR_WM831X
Mark Brown60f91012010-02-17 18:19:29 +0000[diff] [blame]218 help
219 The Wolfson Microelectronics 1192-EV1 is a WM831x based PMIC
220 daughtercard for the Samsung SMDK6410 reference platform.
221 Enabling this option will build support for this module into
222 the kernel. The presence of the daughtercard will be
Masanari Iida59bf8962012-04-18 00:01:21 +0900[diff] [blame]223 detected at runtime so the resulting kernel can be used
Mark Brown60f91012010-02-17 18:19:29 +0000[diff] [blame]224 with or without the 1192-EV1 fitted.
225
Kyungmin Park87c41222009-03-11 11:05:55 +0900[diff] [blame]226config MACH_NCP
227 bool "NCP"
228 select CPU_S3C6410
Kyungmin Park87c41222009-03-11 11:05:55 +0900[diff] [blame]229 select S3C64XX_SETUP_I2C1
Russell Kingb1b3f492012-10-06 17:12:25 +0100[diff] [blame]230 select S3C_DEV_HSMMC1
231 select S3C_DEV_I2C1
Kyungmin Park87c41222009-03-11 11:05:55 +0900[diff] [blame]232 help
233 Machine support for the Samsung NCP
Peter Korsgaard2896bda2009-07-01 17:47:09 +0200[diff] [blame]234
235config MACH_HMT
236 bool "Airgoo HMT"
237 select CPU_S3C6410
Russell Kingb1b3f492012-10-06 17:12:25 +0100[diff] [blame]238 select S3C64XX_SETUP_FB_24BPP
Peter Korsgaard2896bda2009-07-01 17:47:09 +0200[diff] [blame]239 select S3C_DEV_FB
Ben Dooksd23b3512009-09-17 00:01:54 +0100[diff] [blame]240 select S3C_DEV_NAND
Peter Korsgaard2896bda2009-07-01 17:47:09 +0200[diff] [blame]241 select S3C_DEV_USB_HOST
Banajit Goswami2ce30132011-02-28 22:24:51 +0530[diff] [blame]242 select SAMSUNG_DEV_PWM
Peter Korsgaard2896bda2009-07-01 17:47:09 +0200[diff] [blame]243 help
244 Machine support for the Airgoo HMT
Maurus Cuelenaerea2f7bff2010-05-20 11:35:50 +0200[diff] [blame]245
246config MACH_SMARTQ
247 bool
248 select CPU_S3C6410
Russell Kingb1b3f492012-10-06 17:12:25 +0100[diff] [blame]249 select S3C64XX_SETUP_FB_24BPP
250 select S3C64XX_SETUP_SDHCI
251 select S3C64XX_SETUP_USB_PHY
252 select S3C_DEV_FB
Maurus Cuelenaerea2f7bff2010-05-20 11:35:50 +0200[diff] [blame]253 select S3C_DEV_HSMMC
254 select S3C_DEV_HSMMC1
255 select S3C_DEV_HSMMC2
Maurus Cuelenaerea2f7bff2010-05-20 11:35:50 +0200[diff] [blame]256 select S3C_DEV_HWMON
257 select S3C_DEV_RTC
Maurus Cuelenaerea2f7bff2010-05-20 11:35:50 +0200[diff] [blame]258 select S3C_DEV_USB_HOST
Russell Kingb1b3f492012-10-06 17:12:25 +0100[diff] [blame]259 select S3C_DEV_USB_HSOTG
Maurus Cuelenaerea2f7bff2010-05-20 11:35:50 +0200[diff] [blame]260 select SAMSUNG_DEV_ADC
Banajit Goswami2ce30132011-02-28 22:24:51 +0530[diff] [blame]261 select SAMSUNG_DEV_PWM
Maurus Cuelenaerea2f7bff2010-05-20 11:35:50 +0200[diff] [blame]262 select SAMSUNG_DEV_TS
Maurus Cuelenaerea2f7bff2010-05-20 11:35:50 +0200[diff] [blame]263 help
264 Shared machine support for SmartQ 5/7
265
266config MACH_SMARTQ5
267 bool "SmartQ 5"
268 select MACH_SMARTQ
269 help
270 Machine support for the SmartQ 5
271
272config MACH_SMARTQ7
273 bool "SmartQ 7"
274 select MACH_SMARTQ
275 help
276 Machine support for the SmartQ 7
Mark Browne1a3c742011-05-06 09:45:13 +0900[diff] [blame]277
278config MACH_WLF_CRAGG_6410
279 bool "Wolfson Cragganmore 6410"
Arnd Bergmann261592e2015-02-27 05:50:21 +0900[diff] [blame]280 depends on I2C=y
Mark Browne1a3c742011-05-06 09:45:13 +0900[diff] [blame]281 select CPU_S3C6410
Russell Kingb1b3f492012-10-06 17:12:25 +0100[diff] [blame]282 select LEDS_GPIO_REGISTER
283 select S3C64XX_DEV_SPI0
284 select S3C64XX_SETUP_FB_24BPP
Mark Browne1a3c742011-05-06 09:45:13 +0900[diff] [blame]285 select S3C64XX_SETUP_I2C1
286 select S3C64XX_SETUP_IDE
Mark Browne1a3c742011-05-06 09:45:13 +0900[diff] [blame]287 select S3C64XX_SETUP_KEYPAD
Russell Kingb1b3f492012-10-06 17:12:25 +0100[diff] [blame]288 select S3C64XX_SETUP_SDHCI
Padmavathi Venna7d38af512011-12-23 10:16:19 +0900[diff] [blame]289 select S3C64XX_SETUP_SPI
Joonyoung Shim99f6e1f2012-03-07 04:23:47 -0800[diff] [blame]290 select S3C64XX_SETUP_USB_PHY
Mark Brown5a7eb8e2012-11-20 20:13:58 +0900[diff] [blame]291 select S3C_DEV_FB
Mark Browne1a3c742011-05-06 09:45:13 +0900[diff] [blame]292 select S3C_DEV_HSMMC
293 select S3C_DEV_HSMMC1
294 select S3C_DEV_HSMMC2
295 select S3C_DEV_I2C1
Mark Browne1a3c742011-05-06 09:45:13 +0900[diff] [blame]296 select S3C_DEV_RTC
Russell Kingb1b3f492012-10-06 17:12:25 +0100[diff] [blame]297 select S3C_DEV_USB_HOST
298 select S3C_DEV_USB_HSOTG
299 select S3C_DEV_WDT
300 select SAMSUNG_DEV_ADC
301 select SAMSUNG_DEV_KEYPAD
Mark Brown5a7eb8e2012-11-20 20:13:58 +0900[diff] [blame]302 select SAMSUNG_DEV_PWM
Mark Browne1a3c742011-05-06 09:45:13 +0900[diff] [blame]303 help
304 Machine support for the Wolfson Cragganmore S3C6410 variant.
Tomasz Figad2193ce2013-10-06 08:58:40 +0900[diff] [blame]305
Tomasz Figa31e40012013-08-26 02:37:51 +0900[diff] [blame]306config MACH_S3C64XX_DT
307 bool "Samsung S3C6400/S3C6410 machine using Device Tree"
308 select CLKSRC_OF
309 select CPU_S3C6400
310 select CPU_S3C6410
311 select PINCTRL
312 select PINCTRL_S3C64XX
313 select USE_OF
314 help
315 Machine support for Samsung S3C6400/S3C6410 machines with Device Tree
316 enabled.
317 Select this if a fdt blob is available for your S3C64XX SoC based
318 board.
319 Note: This is under development and not all peripherals can be
320 supported with this machine file.
Linus Torvaldsf9efbce2013-11-11 17:34:56 +0900[diff] [blame]321
Tomasz Figad2193ce2013-10-06 08:58:40 +0900[diff] [blame]322endif