blob: 07136ec423bd1bf0c5daa97f165a8f6ac1030b74 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/* 3c501.c: A 3Com 3c501 Ethernet driver for Linux. */
2/*
3 Written 1992,1993,1994 Donald Becker
4
5 Copyright 1993 United States Government as represented by the
6 Director, National Security Agency. This software may be used and
7 distributed according to the terms of the GNU General Public License,
8 incorporated herein by reference.
9
10 This is a device driver for the 3Com Etherlink 3c501.
11 Do not purchase this card, even as a joke. It's performance is horrible,
12 and it breaks in many ways.
13
14 The original author may be reached as becker@scyld.com, or C/O
15 Scyld Computing Corporation
16 410 Severn Ave., Suite 210
17 Annapolis MD 21403
18
19 Fixed (again!) the missing interrupt locking on TX/RX shifting.
20 Alan Cox <Alan.Cox@linux.org>
21
22 Removed calls to init_etherdev since they are no longer needed, and
23 cleaned up modularization just a bit. The driver still allows only
24 the default address for cards when loaded as a module, but that's
25 really less braindead than anyone using a 3c501 board. :)
26 19950208 (invid@msen.com)
27
28 Added traps for interrupts hitting the window as we clear and TX load
29 the board. Now getting 150K/second FTP with a 3c501 card. Still playing
30 with a TX-TX optimisation to see if we can touch 180-200K/second as seems
31 theoretically maximum.
32 19950402 Alan Cox <Alan.Cox@linux.org>
33
34 Cleaned up for 2.3.x because we broke SMP now.
35 20000208 Alan Cox <alan@redhat.com>
36
37 Check up pass for 2.5. Nothing significant changed
38 20021009 Alan Cox <alan@redhat.com>
39
40 Fixed zero fill corner case
41 20030104 Alan Cox <alan@redhat.com>
42
43
44 For the avoidance of doubt the "preferred form" of this code is one which
45 is in an open non patent encumbered format. Where cryptographic key signing
46 forms part of the process of creating an executable the information
47 including keys needed to generate an equivalently functional executable
48 are deemed to be part of the source code.
49
50*/
51
52
53/**
54 * DOC: 3c501 Card Notes
55 *
56 * Some notes on this thing if you have to hack it. [Alan]
57 *
58 * Some documentation is available from 3Com. Due to the boards age
59 * standard responses when you ask for this will range from 'be serious'
60 * to 'give it to a museum'. The documentation is incomplete and mostly
61 * of historical interest anyway.
62 *
63 * The basic system is a single buffer which can be used to receive or
64 * transmit a packet. A third command mode exists when you are setting
65 * things up.
66 *
67 * If it's transmitting it's not receiving and vice versa. In fact the
68 * time to get the board back into useful state after an operation is
69 * quite large.
70 *
71 * The driver works by keeping the board in receive mode waiting for a
72 * packet to arrive. When one arrives it is copied out of the buffer
73 * and delivered to the kernel. The card is reloaded and off we go.
74 *
75 * When transmitting lp->txing is set and the card is reset (from
76 * receive mode) [possibly losing a packet just received] to command
77 * mode. A packet is loaded and transmit mode triggered. The interrupt
78 * handler runs different code for transmit interrupts and can handle
79 * returning to receive mode or retransmissions (yes you have to help
80 * out with those too).
81 *
82 * DOC: Problems
83 *
84 * There are a wide variety of undocumented error returns from the card
85 * and you basically have to kick the board and pray if they turn up. Most
86 * only occur under extreme load or if you do something the board doesn't
87 * like (eg touching a register at the wrong time).
88 *
89 * The driver is less efficient than it could be. It switches through
90 * receive mode even if more transmits are queued. If this worries you buy
91 * a real Ethernet card.
92 *
93 * The combination of slow receive restart and no real multicast
94 * filter makes the board unusable with a kernel compiled for IP
95 * multicasting in a real multicast environment. That's down to the board,
96 * but even with no multicast programs running a multicast IP kernel is
97 * in group 224.0.0.1 and you will therefore be listening to all multicasts.
98 * One nv conference running over that Ethernet and you can give up.
99 *
100 */
101
102#define DRV_NAME "3c501"
103#define DRV_VERSION "2002/10/09"
104
105
106static const char version[] =
107 DRV_NAME ".c: " DRV_VERSION " Alan Cox (alan@redhat.com).\n";
108
109/*
110 * Braindamage remaining:
111 * The 3c501 board.
112 */
113
114#include <linux/module.h>
115
116#include <linux/kernel.h>
117#include <linux/fcntl.h>
118#include <linux/ioport.h>
119#include <linux/interrupt.h>
120#include <linux/slab.h>
121#include <linux/string.h>
122#include <linux/errno.h>
123#include <linux/config.h> /* for CONFIG_IP_MULTICAST */
124#include <linux/spinlock.h>
125#include <linux/ethtool.h>
126#include <linux/delay.h>
127#include <linux/bitops.h>
128
129#include <asm/uaccess.h>
130#include <asm/io.h>
131
132#include <linux/netdevice.h>
133#include <linux/etherdevice.h>
134#include <linux/skbuff.h>
135#include <linux/init.h>
136
137#include "3c501.h"
138
139/*
140 * The boilerplate probe code.
141 */
142
143static int io=0x280;
144static int irq=5;
145static int mem_start;
146
147/**
148 * el1_probe: - probe for a 3c501
149 * @dev: The device structure passed in to probe.
150 *
151 * This can be called from two places. The network layer will probe using
152 * a device structure passed in with the probe information completed. For a
153 * modular driver we use #init_module to fill in our own structure and probe
154 * for it.
155 *
156 * Returns 0 on success. ENXIO if asked not to probe and ENODEV if asked to
157 * probe and failing to find anything.
158 */
159
160struct net_device * __init el1_probe(int unit)
161{
162 struct net_device *dev = alloc_etherdev(sizeof(struct net_local));
163 static unsigned ports[] = { 0x280, 0x300, 0};
164 unsigned *port;
165 int err = 0;
166
167 if (!dev)
168 return ERR_PTR(-ENOMEM);
169
170 if (unit >= 0) {
171 sprintf(dev->name, "eth%d", unit);
172 netdev_boot_setup_check(dev);
173 io = dev->base_addr;
174 irq = dev->irq;
175 mem_start = dev->mem_start & 7;
176 }
177
178 SET_MODULE_OWNER(dev);
179
180 if (io > 0x1ff) { /* Check a single specified location. */
181 err = el1_probe1(dev, io);
182 } else if (io != 0) {
183 err = -ENXIO; /* Don't probe at all. */
184 } else {
185 for (port = ports; *port && el1_probe1(dev, *port); port++)
186 ;
187 if (!*port)
188 err = -ENODEV;
189 }
190 if (err)
191 goto out;
192 err = register_netdev(dev);
193 if (err)
194 goto out1;
195 return dev;
196out1:
197 release_region(dev->base_addr, EL1_IO_EXTENT);
198out:
199 free_netdev(dev);
200 return ERR_PTR(err);
201}
202
203/**
204 * el1_probe1:
205 * @dev: The device structure to use
206 * @ioaddr: An I/O address to probe at.
207 *
208 * The actual probe. This is iterated over by #el1_probe in order to
209 * check all the applicable device locations.
210 *
211 * Returns 0 for a success, in which case the device is activated,
212 * EAGAIN if the IRQ is in use by another driver, and ENODEV if the
213 * board cannot be found.
214 */
215
216static int __init el1_probe1(struct net_device *dev, int ioaddr)
217{
218 struct net_local *lp;
219 const char *mname; /* Vendor name */
220 unsigned char station_addr[6];
221 int autoirq = 0;
222 int i;
223
224 /*
225 * Reserve I/O resource for exclusive use by this driver
226 */
227
228 if (!request_region(ioaddr, EL1_IO_EXTENT, DRV_NAME))
229 return -ENODEV;
230
231 /*
232 * Read the station address PROM data from the special port.
233 */
234
235 for (i = 0; i < 6; i++)
236 {
237 outw(i, ioaddr + EL1_DATAPTR);
238 station_addr[i] = inb(ioaddr + EL1_SAPROM);
239 }
240 /*
241 * Check the first three octets of the S.A. for 3Com's prefix, or
242 * for the Sager NP943 prefix.
243 */
244
245 if (station_addr[0] == 0x02 && station_addr[1] == 0x60
246 && station_addr[2] == 0x8c)
247 {
248 mname = "3c501";
249 } else if (station_addr[0] == 0x00 && station_addr[1] == 0x80
250 && station_addr[2] == 0xC8)
251 {
252 mname = "NP943";
253 }
254 else {
255 release_region(ioaddr, EL1_IO_EXTENT);
256 return -ENODEV;
257 }
258
259 /*
260 * We auto-IRQ by shutting off the interrupt line and letting it float
261 * high.
262 */
263
264 dev->irq = irq;
265
266 if (dev->irq < 2)
267 {
268 unsigned long irq_mask;
269
270 irq_mask = probe_irq_on();
271 inb(RX_STATUS); /* Clear pending interrupts. */
272 inb(TX_STATUS);
273 outb(AX_LOOP + 1, AX_CMD);
274
275 outb(0x00, AX_CMD);
276
277 mdelay(20);
278 autoirq = probe_irq_off(irq_mask);
279
280 if (autoirq == 0)
281 {
282 printk(KERN_WARNING "%s probe at %#x failed to detect IRQ line.\n",
283 mname, ioaddr);
284 release_region(ioaddr, EL1_IO_EXTENT);
285 return -EAGAIN;
286 }
287 }
288
289 outb(AX_RESET+AX_LOOP, AX_CMD); /* Loopback mode. */
290 dev->base_addr = ioaddr;
291 memcpy(dev->dev_addr, station_addr, ETH_ALEN);
292
293 if (mem_start & 0xf)
294 el_debug = mem_start & 0x7;
295 if (autoirq)
296 dev->irq = autoirq;
297
298 printk(KERN_INFO "%s: %s EtherLink at %#lx, using %sIRQ %d.\n", dev->name, mname, dev->base_addr,
299 autoirq ? "auto":"assigned ", dev->irq);
300
301#ifdef CONFIG_IP_MULTICAST
302 printk(KERN_WARNING "WARNING: Use of the 3c501 in a multicast kernel is NOT recommended.\n");
303#endif
304
305 if (el_debug)
306 printk(KERN_DEBUG "%s", version);
307
308 memset(dev->priv, 0, sizeof(struct net_local));
309 lp = netdev_priv(dev);
310 spin_lock_init(&lp->lock);
311
312 /*
313 * The EL1-specific entries in the device structure.
314 */
315
316 dev->open = &el_open;
317 dev->hard_start_xmit = &el_start_xmit;
318 dev->tx_timeout = &el_timeout;
319 dev->watchdog_timeo = HZ;
320 dev->stop = &el1_close;
321 dev->get_stats = &el1_get_stats;
322 dev->set_multicast_list = &set_multicast_list;
323 dev->ethtool_ops = &netdev_ethtool_ops;
324 return 0;
325}
326
327/**
328 * el1_open:
329 * @dev: device that is being opened
330 *
331 * When an ifconfig is issued which changes the device flags to include
332 * IFF_UP this function is called. It is only called when the change
333 * occurs, not when the interface remains up. #el1_close will be called
334 * when it goes down.
335 *
336 * Returns 0 for a successful open, or -EAGAIN if someone has run off
337 * with our interrupt line.
338 */
339
340static int el_open(struct net_device *dev)
341{
342 int retval;
343 int ioaddr = dev->base_addr;
344 struct net_local *lp = netdev_priv(dev);
345 unsigned long flags;
346
347 if (el_debug > 2)
348 printk(KERN_DEBUG "%s: Doing el_open()...", dev->name);
349
350 if ((retval = request_irq(dev->irq, &el_interrupt, 0, dev->name, dev)))
351 return retval;
352
353 spin_lock_irqsave(&lp->lock, flags);
354 el_reset(dev);
355 spin_unlock_irqrestore(&lp->lock, flags);
356
357 lp->txing = 0; /* Board in RX mode */
358 outb(AX_RX, AX_CMD); /* Aux control, irq and receive enabled */
359 netif_start_queue(dev);
360 return 0;
361}
362
363/**
364 * el_timeout:
365 * @dev: The 3c501 card that has timed out
366 *
367 * Attempt to restart the board. This is basically a mixture of extreme
368 * violence and prayer
369 *
370 */
371
372static void el_timeout(struct net_device *dev)
373{
374 struct net_local *lp = netdev_priv(dev);
375 int ioaddr = dev->base_addr;
376
377 if (el_debug)
378 printk (KERN_DEBUG "%s: transmit timed out, txsr %#2x axsr=%02x rxsr=%02x.\n",
379 dev->name, inb(TX_STATUS), inb(AX_STATUS), inb(RX_STATUS));
380 lp->stats.tx_errors++;
381 outb(TX_NORM, TX_CMD);
382 outb(RX_NORM, RX_CMD);
383 outb(AX_OFF, AX_CMD); /* Just trigger a false interrupt. */
384 outb(AX_RX, AX_CMD); /* Aux control, irq and receive enabled */
385 lp->txing = 0; /* Ripped back in to RX */
386 netif_wake_queue(dev);
387}
388
389
390/**
391 * el_start_xmit:
392 * @skb: The packet that is queued to be sent
393 * @dev: The 3c501 card we want to throw it down
394 *
395 * Attempt to send a packet to a 3c501 card. There are some interesting
396 * catches here because the 3c501 is an extremely old and therefore
397 * stupid piece of technology.
398 *
399 * If we are handling an interrupt on the other CPU we cannot load a packet
400 * as we may still be attempting to retrieve the last RX packet buffer.
401 *
402 * When a transmit times out we dump the card into control mode and just
403 * start again. It happens enough that it isnt worth logging.
404 *
405 * We avoid holding the spin locks when doing the packet load to the board.
406 * The device is very slow, and its DMA mode is even slower. If we held the
407 * lock while loading 1500 bytes onto the controller we would drop a lot of
408 * serial port characters. This requires we do extra locking, but we have
409 * no real choice.
410 */
411
412static int el_start_xmit(struct sk_buff *skb, struct net_device *dev)
413{
414 struct net_local *lp = netdev_priv(dev);
415 int ioaddr = dev->base_addr;
416 unsigned long flags;
417
418 /*
419 * Avoid incoming interrupts between us flipping txing and flipping
420 * mode as the driver assumes txing is a faithful indicator of card
421 * state
422 */
423
424 spin_lock_irqsave(&lp->lock, flags);
425
426 /*
427 * Avoid timer-based retransmission conflicts.
428 */
429
430 netif_stop_queue(dev);
431
432 do
433 {
434 int len = skb->len;
435 int pad = 0;
436 int gp_start;
437 unsigned char *buf = skb->data;
438
439 if (len < ETH_ZLEN)
440 pad = ETH_ZLEN - len;
441
442 gp_start = 0x800 - ( len + pad );
443
444 lp->tx_pkt_start = gp_start;
445 lp->collisions = 0;
446
447 lp->stats.tx_bytes += skb->len;
448
449 /*
450 * Command mode with status cleared should [in theory]
451 * mean no more interrupts can be pending on the card.
452 */
453
454 outb_p(AX_SYS, AX_CMD);
455 inb_p(RX_STATUS);
456 inb_p(TX_STATUS);
457
458 lp->loading = 1;
459 lp->txing = 1;
460
461 /*
462 * Turn interrupts back on while we spend a pleasant afternoon
463 * loading bytes into the board
464 */
465
466 spin_unlock_irqrestore(&lp->lock, flags);
467
468 outw(0x00, RX_BUF_CLR); /* Set rx packet area to 0. */
469 outw(gp_start, GP_LOW); /* aim - packet will be loaded into buffer start */
470 outsb(DATAPORT,buf,len); /* load buffer (usual thing each byte increments the pointer) */
471 if (pad) {
472 while(pad--) /* Zero fill buffer tail */
473 outb(0, DATAPORT);
474 }
475 outw(gp_start, GP_LOW); /* the board reuses the same register */
476
477 if(lp->loading != 2)
478 {
479 outb(AX_XMIT, AX_CMD); /* fire ... Trigger xmit. */
480 lp->loading=0;
481 dev->trans_start = jiffies;
482 if (el_debug > 2)
483 printk(KERN_DEBUG " queued xmit.\n");
484 dev_kfree_skb (skb);
485 return 0;
486 }
487 /* A receive upset our load, despite our best efforts */
488 if(el_debug>2)
489 printk(KERN_DEBUG "%s: burped during tx load.\n", dev->name);
490 spin_lock_irqsave(&lp->lock, flags);
491 }
492 while(1);
493
494}
495
496/**
497 * el_interrupt:
498 * @irq: Interrupt number
499 * @dev_id: The 3c501 that burped
500 * @regs: Register data (surplus to our requirements)
501 *
502 * Handle the ether interface interrupts. The 3c501 needs a lot more
503 * hand holding than most cards. In particular we get a transmit interrupt
504 * with a collision error because the board firmware isnt capable of rewinding
505 * its own transmit buffer pointers. It can however count to 16 for us.
506 *
507 * On the receive side the card is also very dumb. It has no buffering to
508 * speak of. We simply pull the packet out of its PIO buffer (which is slow)
509 * and queue it for the kernel. Then we reset the card for the next packet.
510 *
Andreas Mohrd6e05ed2006-06-26 18:35:02 +0200511 * We sometimes get surprise interrupts late both because the SMP IRQ delivery
Linus Torvalds1da177e2005-04-16 15:20:36 -0700512 * is message passing and because the card sometimes seems to deliver late. I
513 * think if it is part way through a receive and the mode is changed it carries
514 * on receiving and sends us an interrupt. We have to band aid all these cases
Andreas Mohrd6e05ed2006-06-26 18:35:02 +0200515 * to get a sensible 150kBytes/second performance. Even then you want a small
Linus Torvalds1da177e2005-04-16 15:20:36 -0700516 * TCP window.
517 */
518
519static irqreturn_t el_interrupt(int irq, void *dev_id, struct pt_regs *regs)
520{
521 struct net_device *dev = dev_id;
522 struct net_local *lp;
523 int ioaddr;
524 int axsr; /* Aux. status reg. */
525
526 ioaddr = dev->base_addr;
527 lp = netdev_priv(dev);
528
529 spin_lock(&lp->lock);
530
531 /*
532 * What happened ?
533 */
534
535 axsr = inb(AX_STATUS);
536
537 /*
538 * Log it
539 */
540
541 if (el_debug > 3)
542 printk(KERN_DEBUG "%s: el_interrupt() aux=%#02x", dev->name, axsr);
543
544 if(lp->loading==1 && !lp->txing)
545 printk(KERN_WARNING "%s: Inconsistent state loading while not in tx\n",
546 dev->name);
547
548 if (lp->txing)
549 {
550
551 /*
552 * Board in transmit mode. May be loading. If we are
553 * loading we shouldn't have got this.
554 */
555
556 int txsr = inb(TX_STATUS);
557
558 if(lp->loading==1)
559 {
560 if(el_debug > 2)
561 {
562 printk(KERN_DEBUG "%s: Interrupt while loading [", dev->name);
563 printk(KERN_DEBUG " txsr=%02x gp=%04x rp=%04x]\n", txsr, inw(GP_LOW),inw(RX_LOW));
564 }
565 lp->loading=2; /* Force a reload */
566 spin_unlock(&lp->lock);
567 goto out;
568 }
569
570 if (el_debug > 6)
571 printk(KERN_DEBUG " txsr=%02x gp=%04x rp=%04x", txsr, inw(GP_LOW),inw(RX_LOW));
572
573 if ((axsr & 0x80) && (txsr & TX_READY) == 0)
574 {
575 /*
576 * FIXME: is there a logic to whether to keep on trying or
577 * reset immediately ?
578 */
579 if(el_debug>1)
580 printk(KERN_DEBUG "%s: Unusual interrupt during Tx, txsr=%02x axsr=%02x"
581 " gp=%03x rp=%03x.\n", dev->name, txsr, axsr,
582 inw(ioaddr + EL1_DATAPTR), inw(ioaddr + EL1_RXPTR));
583 lp->txing = 0;
584 netif_wake_queue(dev);
585 }
586 else if (txsr & TX_16COLLISIONS)
587 {
588 /*
589 * Timed out
590 */
591 if (el_debug)
592 printk (KERN_DEBUG "%s: Transmit failed 16 times, Ethernet jammed?\n",dev->name);
593 outb(AX_SYS, AX_CMD);
594 lp->txing = 0;
595 lp->stats.tx_aborted_errors++;
596 netif_wake_queue(dev);
597 }
598 else if (txsr & TX_COLLISION)
599 {
600 /*
601 * Retrigger xmit.
602 */
603
604 if (el_debug > 6)
605 printk(KERN_DEBUG " retransmitting after a collision.\n");
606 /*
607 * Poor little chip can't reset its own start pointer
608 */
609
610 outb(AX_SYS, AX_CMD);
611 outw(lp->tx_pkt_start, GP_LOW);
612 outb(AX_XMIT, AX_CMD);
613 lp->stats.collisions++;
614 spin_unlock(&lp->lock);
615 goto out;
616 }
617 else
618 {
619 /*
620 * It worked.. we will now fall through and receive
621 */
622 lp->stats.tx_packets++;
623 if (el_debug > 6)
624 printk(KERN_DEBUG " Tx succeeded %s\n",
625 (txsr & TX_RDY) ? "." : "but tx is busy!");
626 /*
627 * This is safe the interrupt is atomic WRT itself.
628 */
629
630 lp->txing = 0;
631 netif_wake_queue(dev); /* In case more to transmit */
632 }
633 }
634 else
635 {
636 /*
637 * In receive mode.
638 */
639
640 int rxsr = inb(RX_STATUS);
641 if (el_debug > 5)
642 printk(KERN_DEBUG " rxsr=%02x txsr=%02x rp=%04x", rxsr, inb(TX_STATUS),inw(RX_LOW));
643 /*
644 * Just reading rx_status fixes most errors.
645 */
646 if (rxsr & RX_MISSED)
647 lp->stats.rx_missed_errors++;
648 else if (rxsr & RX_RUNT)
649 { /* Handled to avoid board lock-up. */
650 lp->stats.rx_length_errors++;
651 if (el_debug > 5)
652 printk(KERN_DEBUG " runt.\n");
653 }
654 else if (rxsr & RX_GOOD)
655 {
656 /*
657 * Receive worked.
658 */
659 el_receive(dev);
660 }
661 else
662 {
663 /*
664 * Nothing? Something is broken!
665 */
666 if (el_debug > 2)
667 printk(KERN_DEBUG "%s: No packet seen, rxsr=%02x **resetting 3c501***\n",
668 dev->name, rxsr);
669 el_reset(dev);
670 }
671 if (el_debug > 3)
672 printk(KERN_DEBUG ".\n");
673 }
674
675 /*
676 * Move into receive mode
677 */
678
679 outb(AX_RX, AX_CMD);
680 outw(0x00, RX_BUF_CLR);
681 inb(RX_STATUS); /* Be certain that interrupts are cleared. */
682 inb(TX_STATUS);
683 spin_unlock(&lp->lock);
684out:
685 return IRQ_HANDLED;
686}
687
688
689/**
690 * el_receive:
691 * @dev: Device to pull the packets from
692 *
693 * We have a good packet. Well, not really "good", just mostly not broken.
694 * We must check everything to see if it is good. In particular we occasionally
695 * get wild packet sizes from the card. If the packet seems sane we PIO it
696 * off the card and queue it for the protocol layers.
697 */
698
699static void el_receive(struct net_device *dev)
700{
701 struct net_local *lp = netdev_priv(dev);
702 int ioaddr = dev->base_addr;
703 int pkt_len;
704 struct sk_buff *skb;
705
706 pkt_len = inw(RX_LOW);
707
708 if (el_debug > 4)
709 printk(KERN_DEBUG " el_receive %d.\n", pkt_len);
710
711 if ((pkt_len < 60) || (pkt_len > 1536))
712 {
713 if (el_debug)
714 printk(KERN_DEBUG "%s: bogus packet, length=%d\n", dev->name, pkt_len);
715 lp->stats.rx_over_errors++;
716 return;
717 }
718
719 /*
720 * Command mode so we can empty the buffer
721 */
722
723 outb(AX_SYS, AX_CMD);
724 skb = dev_alloc_skb(pkt_len+2);
725
726 /*
727 * Start of frame
728 */
729
730 outw(0x00, GP_LOW);
731 if (skb == NULL)
732 {
733 printk(KERN_INFO "%s: Memory squeeze, dropping packet.\n", dev->name);
734 lp->stats.rx_dropped++;
735 return;
736 }
737 else
738 {
739 skb_reserve(skb,2); /* Force 16 byte alignment */
740 skb->dev = dev;
741 /*
742 * The read increments through the bytes. The interrupt
743 * handler will fix the pointer when it returns to
744 * receive mode.
745 */
746 insb(DATAPORT, skb_put(skb,pkt_len), pkt_len);
747 skb->protocol=eth_type_trans(skb,dev);
748 netif_rx(skb);
749 dev->last_rx = jiffies;
750 lp->stats.rx_packets++;
751 lp->stats.rx_bytes+=pkt_len;
752 }
753 return;
754}
755
756/**
757 * el_reset: Reset a 3c501 card
758 * @dev: The 3c501 card about to get zapped
759 *
760 * Even resetting a 3c501 isnt simple. When you activate reset it loses all
761 * its configuration. You must hold the lock when doing this. The function
762 * cannot take the lock itself as it is callable from the irq handler.
763 */
764
765static void el_reset(struct net_device *dev)
766{
767 struct net_local *lp = netdev_priv(dev);
768 int ioaddr = dev->base_addr;
769
770 if (el_debug> 2)
771 printk(KERN_INFO "3c501 reset...");
772 outb(AX_RESET, AX_CMD); /* Reset the chip */
773 outb(AX_LOOP, AX_CMD); /* Aux control, irq and loopback enabled */
774 {
775 int i;
776 for (i = 0; i < 6; i++) /* Set the station address. */
777 outb(dev->dev_addr[i], ioaddr + i);
778 }
779
780 outw(0, RX_BUF_CLR); /* Set rx packet area to 0. */
781 outb(TX_NORM, TX_CMD); /* tx irq on done, collision */
782 outb(RX_NORM, RX_CMD); /* Set Rx commands. */
783 inb(RX_STATUS); /* Clear status. */
784 inb(TX_STATUS);
785 lp->txing = 0;
786}
787
788/**
789 * el1_close:
790 * @dev: 3c501 card to shut down
791 *
792 * Close a 3c501 card. The IFF_UP flag has been cleared by the user via
793 * the SIOCSIFFLAGS ioctl. We stop any further transmissions being queued,
794 * and then disable the interrupts. Finally we reset the chip. The effects
795 * of the rest will be cleaned up by #el1_open. Always returns 0 indicating
796 * a success.
797 */
798
799static int el1_close(struct net_device *dev)
800{
801 int ioaddr = dev->base_addr;
802
803 if (el_debug > 2)
804 printk(KERN_INFO "%s: Shutting down Ethernet card at %#x.\n", dev->name, ioaddr);
805
806 netif_stop_queue(dev);
807
808 /*
809 * Free and disable the IRQ.
810 */
811
812 free_irq(dev->irq, dev);
813 outb(AX_RESET, AX_CMD); /* Reset the chip */
814
815 return 0;
816}
817
818/**
819 * el1_get_stats:
820 * @dev: The card to get the statistics for
821 *
822 * In smarter devices this function is needed to pull statistics off the
823 * board itself. The 3c501 has no hardware statistics. We maintain them all
824 * so they are by definition always up to date.
825 *
826 * Returns the statistics for the card from the card private data
827 */
828
829static struct net_device_stats *el1_get_stats(struct net_device *dev)
830{
831 struct net_local *lp = netdev_priv(dev);
832 return &lp->stats;
833}
834
835/**
836 * set_multicast_list:
837 * @dev: The device to adjust
838 *
839 * Set or clear the multicast filter for this adaptor to use the best-effort
840 * filtering supported. The 3c501 supports only three modes of filtering.
841 * It always receives broadcasts and packets for itself. You can choose to
842 * optionally receive all packets, or all multicast packets on top of this.
843 */
844
845static void set_multicast_list(struct net_device *dev)
846{
847 int ioaddr = dev->base_addr;
848
849 if(dev->flags&IFF_PROMISC)
850 {
851 outb(RX_PROM, RX_CMD);
852 inb(RX_STATUS);
853 }
854 else if (dev->mc_list || dev->flags&IFF_ALLMULTI)
855 {
856 outb(RX_MULT, RX_CMD); /* Multicast or all multicast is the same */
857 inb(RX_STATUS); /* Clear status. */
858 }
859 else
860 {
861 outb(RX_NORM, RX_CMD);
862 inb(RX_STATUS);
863 }
864}
865
866
867static void netdev_get_drvinfo(struct net_device *dev,
868 struct ethtool_drvinfo *info)
869{
870 strcpy(info->driver, DRV_NAME);
871 strcpy(info->version, DRV_VERSION);
872 sprintf(info->bus_info, "ISA 0x%lx", dev->base_addr);
873}
874
875static u32 netdev_get_msglevel(struct net_device *dev)
876{
877 return debug;
878}
879
880static void netdev_set_msglevel(struct net_device *dev, u32 level)
881{
882 debug = level;
883}
884
885static struct ethtool_ops netdev_ethtool_ops = {
886 .get_drvinfo = netdev_get_drvinfo,
887 .get_msglevel = netdev_get_msglevel,
888 .set_msglevel = netdev_set_msglevel,
889};
890
891#ifdef MODULE
892
893static struct net_device *dev_3c501;
894
895module_param(io, int, 0);
896module_param(irq, int, 0);
897MODULE_PARM_DESC(io, "EtherLink I/O base address");
898MODULE_PARM_DESC(irq, "EtherLink IRQ number");
899
900/**
901 * init_module:
902 *
903 * When the driver is loaded as a module this function is called. We fake up
904 * a device structure with the base I/O and interrupt set as if it were being
905 * called from Space.c. This minimises the extra code that would otherwise
906 * be required.
907 *
908 * Returns 0 for success or -EIO if a card is not found. Returning an error
909 * here also causes the module to be unloaded
910 */
911
Randy Dunlap96e672c2006-06-10 13:33:48 -0700912int __init init_module(void)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700913{
914 dev_3c501 = el1_probe(-1);
915 if (IS_ERR(dev_3c501))
916 return PTR_ERR(dev_3c501);
917 return 0;
918}
919
920/**
921 * cleanup_module:
922 *
923 * The module is being unloaded. We unhook our network device from the system
924 * and then free up the resources we took when the card was found.
925 */
926
927void cleanup_module(void)
928{
929 struct net_device *dev = dev_3c501;
930 unregister_netdev(dev);
931 release_region(dev->base_addr, EL1_IO_EXTENT);
932 free_netdev(dev);
933}
934
935#endif /* MODULE */
936
937MODULE_AUTHOR("Donald Becker, Alan Cox");
938MODULE_DESCRIPTION("Support for the ancient 3Com 3c501 ethernet card");
939MODULE_LICENSE("GPL");
940