blob: 8e9f5048a10a9dab8b2705a579d401d972fe036a [file] [log] [blame]
Jeff Garzik669a5db2006-08-29 18:12:40 -04001/*
2 * pata_via.c - VIA PATA for new ATA layer
3 * (C) 2005-2006 Red Hat Inc
Jeff Garzik669a5db2006-08-29 18:12:40 -04004 *
5 * Documentation
6 * Most chipset documentation available under NDA only
7 *
8 * VIA version guide
9 * VIA VT82C561 - early design, uses ata_generic currently
10 * VIA VT82C576 - MWDMA, 33Mhz
11 * VIA VT82C586 - MWDMA, 33Mhz
12 * VIA VT82C586a - Added UDMA to 33Mhz
13 * VIA VT82C586b - UDMA33
14 * VIA VT82C596a - Nonfunctional UDMA66
15 * VIA VT82C596b - Working UDMA66
16 * VIA VT82C686 - Nonfunctional UDMA66
17 * VIA VT82C686a - Working UDMA66
18 * VIA VT82C686b - Updated to UDMA100
19 * VIA VT8231 - UDMA100
20 * VIA VT8233 - UDMA100
21 * VIA VT8233a - UDMA133
22 * VIA VT8233c - UDMA100
23 * VIA VT8235 - UDMA133
24 * VIA VT8237 - UDMA133
Bartlomiej Zolnierkiewicz460f5312010-01-18 18:17:12 +010025 * VIA VT8237A - UDMA133
Alan05c39e52007-01-31 17:14:38 +000026 * VIA VT8237S - UDMA133
Alan75f609d2006-12-04 16:38:25 +000027 * VIA VT8251 - UDMA133
Jeff Garzik669a5db2006-08-29 18:12:40 -040028 *
29 * Most registers remain compatible across chips. Others start reserved
30 * and acquire sensible semantics if set to 1 (eg cable detect). A few
31 * exceptions exist, notably around the FIFO settings.
32 *
33 * One additional quirk of the VIA design is that like ALi they use few
34 * PCI IDs for a lot of chips.
35 *
36 * Based heavily on:
37 *
38 * Version 3.38
39 *
40 * VIA IDE driver for Linux. Supported southbridges:
41 *
42 * vt82c576, vt82c586, vt82c586a, vt82c586b, vt82c596a, vt82c596b,
43 * vt82c686, vt82c686a, vt82c686b, vt8231, vt8233, vt8233c, vt8233a,
44 * vt8235, vt8237
45 *
46 * Copyright (c) 2000-2002 Vojtech Pavlik
47 *
48 * Based on the work of:
49 * Michel Aubry
50 * Jeff Garzik
51 * Andre Hedrick
52
53 */
54
55#include <linux/kernel.h>
56#include <linux/module.h>
57#include <linux/pci.h>
58#include <linux/init.h>
59#include <linux/blkdev.h>
60#include <linux/delay.h>
Tejun Heo5a0e3ad2010-03-24 17:04:11 +090061#include <linux/gfp.h>
Jeff Garzik669a5db2006-08-29 18:12:40 -040062#include <scsi/scsi_host.h>
63#include <linux/libata.h>
Alan Coxcf5792d2007-05-23 22:39:01 +010064#include <linux/dmi.h>
Jeff Garzik669a5db2006-08-29 18:12:40 -040065
66#define DRV_NAME "pata_via"
Alan Coxb4746ed2009-04-17 12:21:21 +010067#define DRV_VERSION "0.3.4"
Jeff Garzik669a5db2006-08-29 18:12:40 -040068
Jeff Garzik669a5db2006-08-29 18:12:40 -040069enum {
Bartlomiej Zolnierkiewicz460f5312010-01-18 18:17:12 +010070 VIA_BAD_PREQ = 0x01, /* Crashes if PREQ# till DDACK# set */
71 VIA_BAD_CLK66 = 0x02, /* 66 MHz clock doesn't work correctly */
72 VIA_SET_FIFO = 0x04, /* Needs to have FIFO split set */
73 VIA_NO_UNMASK = 0x08, /* Doesn't work with IRQ unmasking on */
74 VIA_BAD_ID = 0x10, /* Has wrong vendor ID (0x1107) */
75 VIA_BAD_AST = 0x20, /* Don't touch Address Setup Timing */
76 VIA_NO_ENABLES = 0x40, /* Has no enablebits */
77 VIA_SATA_PATA = 0x80, /* SATA/PATA combined configuration */
Jeff Garzik669a5db2006-08-29 18:12:40 -040078};
79
JosephChan@via.com.twe4d866c2009-01-23 15:37:39 +080080enum {
81 VIA_IDFLAG_SINGLE = (1 << 0), /* single channel controller) */
82};
83
Jeff Garzik669a5db2006-08-29 18:12:40 -040084/*
85 * VIA SouthBridge chips.
86 */
87
88static const struct via_isa_bridge {
89 const char *name;
90 u16 id;
91 u8 rev_min;
92 u8 rev_max;
Bartlomiej Zolnierkiewicz460f5312010-01-18 18:17:12 +010093 u8 udma_mask;
94 u8 flags;
Jeff Garzik669a5db2006-08-29 18:12:40 -040095} via_isa_bridges[] = {
Bartlomiej Zolnierkiewicz460f5312010-01-18 18:17:12 +010096 { "vx855", PCI_DEVICE_ID_VIA_VX855, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST | VIA_SATA_PATA },
97 { "vx800", PCI_DEVICE_ID_VIA_VX800, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST | VIA_SATA_PATA },
98 { "vt8261", PCI_DEVICE_ID_VIA_8261, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
99 { "vt8237s", PCI_DEVICE_ID_VIA_8237S, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
100 { "vt8251", PCI_DEVICE_ID_VIA_8251, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
101 { "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST | VIA_SATA_PATA },
102 { "vt6410", PCI_DEVICE_ID_VIA_6410, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST | VIA_NO_ENABLES },
103 { "vt6415", PCI_DEVICE_ID_VIA_6415, 0x00, 0xff, ATA_UDMA6, VIA_BAD_AST | VIA_NO_ENABLES },
104 { "vt8237a", PCI_DEVICE_ID_VIA_8237A, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
105 { "vt8237", PCI_DEVICE_ID_VIA_8237, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
106 { "vt8235", PCI_DEVICE_ID_VIA_8235, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
107 { "vt8233a", PCI_DEVICE_ID_VIA_8233A, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
108 { "vt8233c", PCI_DEVICE_ID_VIA_8233C_0, 0x00, 0x2f, ATA_UDMA5, },
109 { "vt8233", PCI_DEVICE_ID_VIA_8233_0, 0x00, 0x2f, ATA_UDMA5, },
110 { "vt8231", PCI_DEVICE_ID_VIA_8231, 0x00, 0x2f, ATA_UDMA5, },
111 { "vt82c686b", PCI_DEVICE_ID_VIA_82C686, 0x40, 0x4f, ATA_UDMA5, },
112 { "vt82c686a", PCI_DEVICE_ID_VIA_82C686, 0x10, 0x2f, ATA_UDMA4, },
113 { "vt82c686", PCI_DEVICE_ID_VIA_82C686, 0x00, 0x0f, ATA_UDMA2, VIA_BAD_CLK66 },
114 { "vt82c596b", PCI_DEVICE_ID_VIA_82C596, 0x10, 0x2f, ATA_UDMA4, },
115 { "vt82c596a", PCI_DEVICE_ID_VIA_82C596, 0x00, 0x0f, ATA_UDMA2, VIA_BAD_CLK66 },
116 { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x47, 0x4f, ATA_UDMA2, VIA_SET_FIFO },
117 { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x40, 0x46, ATA_UDMA2, VIA_SET_FIFO | VIA_BAD_PREQ },
118 { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x30, 0x3f, ATA_UDMA2, VIA_SET_FIFO },
119 { "vt82c586a", PCI_DEVICE_ID_VIA_82C586_0, 0x20, 0x2f, ATA_UDMA2, VIA_SET_FIFO },
120 { "vt82c586", PCI_DEVICE_ID_VIA_82C586_0, 0x00, 0x0f, 0x00, VIA_SET_FIFO },
121 { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, 0x00, VIA_SET_FIFO | VIA_NO_UNMASK },
122 { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, 0x00, VIA_SET_FIFO | VIA_NO_UNMASK | VIA_BAD_ID },
123 { "vtxxxx", PCI_DEVICE_ID_VIA_ANON, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
Jeff Garzik669a5db2006-08-29 18:12:40 -0400124 { NULL }
125};
126
Tejun Heo6d0e1942011-08-04 11:15:07 +0200127static const struct dmi_system_id no_atapi_dma_dmi_table[] = {
128 {
129 .ident = "AVERATEC 3200",
130 .matches = {
131 DMI_MATCH(DMI_BOARD_VENDOR, "AVERATEC"),
132 DMI_MATCH(DMI_BOARD_NAME, "3200"),
133 },
134 },
135 { }
136};
137
Alan Coxb4746ed2009-04-17 12:21:21 +0100138struct via_port {
139 u8 cached_device;
140};
Alan Coxcf5792d2007-05-23 22:39:01 +0100141
142/*
143 * Cable special cases
144 */
145
Jeff Garzik18552562007-10-03 15:15:40 -0400146static const struct dmi_system_id cable_dmi_table[] = {
Alan Coxcf5792d2007-05-23 22:39:01 +0100147 {
148 .ident = "Acer Ferrari 3400",
149 .matches = {
150 DMI_MATCH(DMI_BOARD_VENDOR, "Acer,Inc."),
151 DMI_MATCH(DMI_BOARD_NAME, "Ferrari 3400"),
152 },
153 },
154 { }
155};
156
157static int via_cable_override(struct pci_dev *pdev)
158{
159 /* Systems by DMI */
160 if (dmi_check_system(cable_dmi_table))
161 return 1;
Alan Cox9edbdbe2007-08-22 22:57:48 +0100162 /* Arima W730-K8/Targa Visionary 811/... */
163 if (pdev->subsystem_vendor == 0x161F && pdev->subsystem_device == 0x2032)
164 return 1;
Alan Coxcf5792d2007-05-23 22:39:01 +0100165 return 0;
166}
167
168
Jeff Garzik669a5db2006-08-29 18:12:40 -0400169/**
170 * via_cable_detect - cable detection
171 * @ap: ATA port
172 *
173 * Perform cable detection. Actually for the VIA case the BIOS
174 * already did this for us. We read the values provided by the
175 * BIOS. If you are using an 8235 in a non-PC configuration you
176 * may need to update this code.
177 *
178 * Hotplug also impacts on this.
179 */
180
181static int via_cable_detect(struct ata_port *ap) {
Alan Cox97cb81c2007-03-07 16:56:54 +0000182 const struct via_isa_bridge *config = ap->host->private_data;
Jeff Garzik669a5db2006-08-29 18:12:40 -0400183 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
184 u32 ata66;
185
Alan Coxcf5792d2007-05-23 22:39:01 +0100186 if (via_cable_override(pdev))
187 return ATA_CBL_PATA40_SHORT;
188
Tejun Heo7585eb12008-02-07 10:18:53 +0900189 if ((config->flags & VIA_SATA_PATA) && ap->port_no == 0)
190 return ATA_CBL_SATA;
191
Alan Cox97cb81c2007-03-07 16:56:54 +0000192 /* Early chips are 40 wire */
Bartlomiej Zolnierkiewicz460f5312010-01-18 18:17:12 +0100193 if (config->udma_mask < ATA_UDMA4)
Alan Cox97cb81c2007-03-07 16:56:54 +0000194 return ATA_CBL_PATA40;
195 /* UDMA 66 chips have only drive side logic */
Bartlomiej Zolnierkiewicz460f5312010-01-18 18:17:12 +0100196 else if (config->udma_mask < ATA_UDMA5)
Alan Cox97cb81c2007-03-07 16:56:54 +0000197 return ATA_CBL_PATA_UNK;
198 /* UDMA 100 or later */
Jeff Garzik669a5db2006-08-29 18:12:40 -0400199 pci_read_config_dword(pdev, 0x50, &ata66);
200 /* Check both the drive cable reporting bits, we might not have
201 two drives */
202 if (ata66 & (0x10100000 >> (16 * ap->port_no)))
203 return ATA_CBL_PATA80;
Alan Cox7d73a362007-07-26 18:38:06 +0100204 /* Check with ACPI so we can spot BIOS reported SATA bridges */
Tejun Heo021ee9a2007-12-18 16:33:06 +0900205 if (ata_acpi_init_gtm(ap) &&
206 ata_acpi_cbl_80wire(ap, ata_acpi_init_gtm(ap)))
Alan Cox7d73a362007-07-26 18:38:06 +0100207 return ATA_CBL_PATA80;
Alan Cox97cb81c2007-03-07 16:56:54 +0000208 return ATA_CBL_PATA40;
Jeff Garzik669a5db2006-08-29 18:12:40 -0400209}
210
Tejun Heocc0680a2007-08-06 18:36:23 +0900211static int via_pre_reset(struct ata_link *link, unsigned long deadline)
Jeff Garzik669a5db2006-08-29 18:12:40 -0400212{
Tejun Heocc0680a2007-08-06 18:36:23 +0900213 struct ata_port *ap = link->ap;
Jeff Garzik669a5db2006-08-29 18:12:40 -0400214 const struct via_isa_bridge *config = ap->host->private_data;
215
216 if (!(config->flags & VIA_NO_ENABLES)) {
217 static const struct pci_bits via_enable_bits[] = {
218 { 0x40, 1, 0x02, 0x02 },
219 { 0x40, 1, 0x01, 0x01 }
220 };
Jeff Garzik669a5db2006-08-29 18:12:40 -0400221 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
Alan Coxc9619222006-09-26 17:53:38 +0100222 if (!pci_test_config_bits(pdev, &via_enable_bits[ap->port_no]))
223 return -ENOENT;
Jeff Garzik669a5db2006-08-29 18:12:40 -0400224 }
Tejun Heod4b2bab2007-02-02 16:50:52 +0900225
Tejun Heo9363c382008-04-07 22:47:16 +0900226 return ata_sff_prereset(link, deadline);
Jeff Garzik669a5db2006-08-29 18:12:40 -0400227}
228
229
230/**
Bartlomiej Zolnierkiewiczf7775822010-01-18 18:17:03 +0100231 * via_do_set_mode - set transfer mode data
Jeff Garzik669a5db2006-08-29 18:12:40 -0400232 * @ap: ATA interface
233 * @adev: ATA device
234 * @mode: ATA mode being programmed
Jeff Garzik669a5db2006-08-29 18:12:40 -0400235 * @set_ast: Set to program address setup
236 * @udma_type: UDMA mode/format of registers
237 *
238 * Program the VIA registers for DMA and PIO modes. Uses the ata timing
239 * support in order to compute modes.
240 *
241 * FIXME: Hotplug will require we serialize multiple mode changes
242 * on the two channels.
243 */
244
Bartlomiej Zolnierkiewicz460f5312010-01-18 18:17:12 +0100245static void via_do_set_mode(struct ata_port *ap, struct ata_device *adev,
246 int mode, int set_ast, int udma_type)
Jeff Garzik669a5db2006-08-29 18:12:40 -0400247{
248 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
249 struct ata_device *peer = ata_dev_pair(adev);
250 struct ata_timing t, p;
Bartlomiej Zolnierkiewicz460f5312010-01-18 18:17:12 +0100251 static int via_clock = 33333; /* Bus clock in kHZ */
Jeff Garzik669a5db2006-08-29 18:12:40 -0400252 unsigned long T = 1000000000 / via_clock;
Bartlomiej Zolnierkiewicz460f5312010-01-18 18:17:12 +0100253 unsigned long UT = T;
Jeff Garzik669a5db2006-08-29 18:12:40 -0400254 int ut;
255 int offset = 3 - (2*ap->port_no) - adev->devno;
256
Bartlomiej Zolnierkiewicz460f5312010-01-18 18:17:12 +0100257 switch (udma_type) {
258 case ATA_UDMA4:
259 UT = T / 2; break;
260 case ATA_UDMA5:
261 UT = T / 3; break;
262 case ATA_UDMA6:
263 UT = T / 4; break;
264 }
265
Jeff Garzik669a5db2006-08-29 18:12:40 -0400266 /* Calculate the timing values we require */
267 ata_timing_compute(adev, mode, &t, T, UT);
268
269 /* We share 8bit timing so we must merge the constraints */
270 if (peer) {
271 if (peer->pio_mode) {
272 ata_timing_compute(peer, peer->pio_mode, &p, T, UT);
273 ata_timing_merge(&p, &t, &t, ATA_TIMING_8BIT);
274 }
275 }
276
277 /* Address setup is programmable but breaks on UDMA133 setups */
278 if (set_ast) {
279 u8 setup; /* 2 bits per drive */
280 int shift = 2 * offset;
281
282 pci_read_config_byte(pdev, 0x4C, &setup);
283 setup &= ~(3 << shift);
Bartlomiej Zolnierkiewiczf7775822010-01-18 18:17:03 +0100284 setup |= (clamp_val(t.setup, 1, 4) - 1) << shift;
Jeff Garzik669a5db2006-08-29 18:12:40 -0400285 pci_write_config_byte(pdev, 0x4C, setup);
286 }
287
288 /* Load the PIO mode bits */
289 pci_write_config_byte(pdev, 0x4F - ap->port_no,
Harvey Harrison07633b52008-05-14 16:17:00 -0700290 ((clamp_val(t.act8b, 1, 16) - 1) << 4) | (clamp_val(t.rec8b, 1, 16) - 1));
Jeff Garzik669a5db2006-08-29 18:12:40 -0400291 pci_write_config_byte(pdev, 0x48 + offset,
Harvey Harrison07633b52008-05-14 16:17:00 -0700292 ((clamp_val(t.active, 1, 16) - 1) << 4) | (clamp_val(t.recover, 1, 16) - 1));
Jeff Garzik669a5db2006-08-29 18:12:40 -0400293
294 /* Load the UDMA bits according to type */
Bartlomiej Zolnierkiewicz460f5312010-01-18 18:17:12 +0100295 switch (udma_type) {
296 case ATA_UDMA2:
297 default:
298 ut = t.udma ? (0xe0 | (clamp_val(t.udma, 2, 5) - 2)) : 0x03;
299 break;
300 case ATA_UDMA4:
301 ut = t.udma ? (0xe8 | (clamp_val(t.udma, 2, 9) - 2)) : 0x0f;
302 break;
303 case ATA_UDMA5:
304 ut = t.udma ? (0xe0 | (clamp_val(t.udma, 2, 9) - 2)) : 0x07;
305 break;
306 case ATA_UDMA6:
307 ut = t.udma ? (0xe0 | (clamp_val(t.udma, 2, 9) - 2)) : 0x07;
308 break;
Jeff Garzik669a5db2006-08-29 18:12:40 -0400309 }
Laurent Riffard08ebd432007-09-02 21:01:32 +0200310
Jeff Garzik669a5db2006-08-29 18:12:40 -0400311 /* Set UDMA unless device is not UDMA capable */
Bartlomiej Zolnierkiewiczc4d8a202009-12-03 20:32:13 +0100312 if (udma_type) {
313 u8 udma_etc;
Laurent Riffard08ebd432007-09-02 21:01:32 +0200314
Bartlomiej Zolnierkiewiczc4d8a202009-12-03 20:32:13 +0100315 pci_read_config_byte(pdev, 0x50 + offset, &udma_etc);
Laurent Riffard08ebd432007-09-02 21:01:32 +0200316
Bartlomiej Zolnierkiewiczc4d8a202009-12-03 20:32:13 +0100317 /* clear transfer mode bit */
318 udma_etc &= ~0x20;
319
320 if (t.udma) {
321 /* preserve 80-wire cable detection bit */
322 udma_etc &= 0x10;
323 udma_etc |= ut;
324 }
325
326 pci_write_config_byte(pdev, 0x50 + offset, udma_etc);
Laurent Riffard08ebd432007-09-02 21:01:32 +0200327 }
Jeff Garzik669a5db2006-08-29 18:12:40 -0400328}
329
330static void via_set_piomode(struct ata_port *ap, struct ata_device *adev)
331{
332 const struct via_isa_bridge *config = ap->host->private_data;
333 int set_ast = (config->flags & VIA_BAD_AST) ? 0 : 1;
Jeff Garzik669a5db2006-08-29 18:12:40 -0400334
Bartlomiej Zolnierkiewicz460f5312010-01-18 18:17:12 +0100335 via_do_set_mode(ap, adev, adev->pio_mode, set_ast, config->udma_mask);
Jeff Garzik669a5db2006-08-29 18:12:40 -0400336}
337
338static void via_set_dmamode(struct ata_port *ap, struct ata_device *adev)
339{
340 const struct via_isa_bridge *config = ap->host->private_data;
341 int set_ast = (config->flags & VIA_BAD_AST) ? 0 : 1;
Jeff Garzik669a5db2006-08-29 18:12:40 -0400342
Bartlomiej Zolnierkiewicz460f5312010-01-18 18:17:12 +0100343 via_do_set_mode(ap, adev, adev->dma_mode, set_ast, config->udma_mask);
Jeff Garzik669a5db2006-08-29 18:12:40 -0400344}
345
JosephChan@via.com.twbfce5e02008-07-30 12:32:48 -0700346/**
Alan Cox10734fc2009-11-30 13:22:43 +0000347 * via_mode_filter - filter buggy device/mode pairs
348 * @dev: ATA device
349 * @mask: Mode bitmask
350 *
351 * We need to apply some minimal filtering for old controllers and at least
352 * one breed of Transcend SSD. Return the updated mask.
353 */
354
355static unsigned long via_mode_filter(struct ata_device *dev, unsigned long mask)
356{
357 struct ata_host *host = dev->link->ap->host;
358 const struct via_isa_bridge *config = host->private_data;
359 unsigned char model_num[ATA_ID_PROD_LEN + 1];
360
361 if (config->id == PCI_DEVICE_ID_VIA_82C586_0) {
362 ata_id_c_string(dev->id, model_num, ATA_ID_PROD, sizeof(model_num));
363 if (strcmp(model_num, "TS64GSSD25-M") == 0) {
Joe Perchesa9a79df2011-04-15 15:51:59 -0700364 ata_dev_warn(dev,
365 "disabling UDMA mode due to reported lockups with this device\n");
Alan Cox10734fc2009-11-30 13:22:43 +0000366 mask &= ~ ATA_MASK_UDMA;
367 }
368 }
Tejun Heo6d0e1942011-08-04 11:15:07 +0200369
370 if (dev->class == ATA_DEV_ATAPI &&
371 dmi_check_system(no_atapi_dma_dmi_table)) {
372 ata_dev_warn(dev, "controller locks up on ATAPI DMA, forcing PIO\n");
373 mask &= ATA_MASK_PIO;
374 }
375
Tejun Heoc7087652010-05-10 21:41:34 +0200376 return mask;
Alan Cox10734fc2009-11-30 13:22:43 +0000377}
378
379/**
Tejun Heoff047152008-07-31 18:02:35 +0900380 * via_tf_load - send taskfile registers to host controller
JosephChan@via.com.twbfce5e02008-07-30 12:32:48 -0700381 * @ap: Port to which output is sent
382 * @tf: ATA taskfile register set
383 *
384 * Outputs ATA taskfile to standard ATA host controller.
385 *
386 * Note: This is to fix the internal bug of via chipsets, which
Tejun Heoff047152008-07-31 18:02:35 +0900387 * will reset the device register after changing the IEN bit on
388 * ctl register
JosephChan@via.com.twbfce5e02008-07-30 12:32:48 -0700389 */
Tejun Heoff047152008-07-31 18:02:35 +0900390static void via_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
JosephChan@via.com.twbfce5e02008-07-30 12:32:48 -0700391{
Alan Coxb4746ed2009-04-17 12:21:21 +0100392 struct ata_ioports *ioaddr = &ap->ioaddr;
393 struct via_port *vp = ap->private_data;
394 unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
395 int newctl = 0;
JosephChan@via.com.twbfce5e02008-07-30 12:32:48 -0700396
Alan Coxb4746ed2009-04-17 12:21:21 +0100397 if (tf->ctl != ap->last_ctl) {
398 iowrite8(tf->ctl, ioaddr->ctl_addr);
399 ap->last_ctl = tf->ctl;
400 ata_wait_idle(ap);
401 newctl = 1;
JosephChan@via.com.twbfce5e02008-07-30 12:32:48 -0700402 }
Alan Coxb4746ed2009-04-17 12:21:21 +0100403
404 if (tf->flags & ATA_TFLAG_DEVICE) {
405 iowrite8(tf->device, ioaddr->device_addr);
406 vp->cached_device = tf->device;
407 } else if (newctl)
408 iowrite8(vp->cached_device, ioaddr->device_addr);
409
410 if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
411 WARN_ON_ONCE(!ioaddr->ctl_addr);
412 iowrite8(tf->hob_feature, ioaddr->feature_addr);
413 iowrite8(tf->hob_nsect, ioaddr->nsect_addr);
414 iowrite8(tf->hob_lbal, ioaddr->lbal_addr);
415 iowrite8(tf->hob_lbam, ioaddr->lbam_addr);
416 iowrite8(tf->hob_lbah, ioaddr->lbah_addr);
417 VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n",
418 tf->hob_feature,
419 tf->hob_nsect,
420 tf->hob_lbal,
421 tf->hob_lbam,
422 tf->hob_lbah);
423 }
424
425 if (is_addr) {
426 iowrite8(tf->feature, ioaddr->feature_addr);
427 iowrite8(tf->nsect, ioaddr->nsect_addr);
428 iowrite8(tf->lbal, ioaddr->lbal_addr);
429 iowrite8(tf->lbam, ioaddr->lbam_addr);
430 iowrite8(tf->lbah, ioaddr->lbah_addr);
431 VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n",
432 tf->feature,
433 tf->nsect,
434 tf->lbal,
435 tf->lbam,
436 tf->lbah);
437 }
Tejun Heo40c60232010-09-09 17:13:31 +0200438
439 ata_wait_idle(ap);
Alan Coxb4746ed2009-04-17 12:21:21 +0100440}
441
442static int via_port_start(struct ata_port *ap)
443{
444 struct via_port *vp;
445 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
446
Tejun Heoc7087652010-05-10 21:41:34 +0200447 int ret = ata_bmdma_port_start(ap);
Alan Coxb4746ed2009-04-17 12:21:21 +0100448 if (ret < 0)
449 return ret;
450
451 vp = devm_kzalloc(&pdev->dev, sizeof(struct via_port), GFP_KERNEL);
452 if (vp == NULL)
453 return -ENOMEM;
454 ap->private_data = vp;
455 return 0;
JosephChan@via.com.twbfce5e02008-07-30 12:32:48 -0700456}
457
Jeff Garzik669a5db2006-08-29 18:12:40 -0400458static struct scsi_host_template via_sht = {
Tejun Heo68d1d072008-03-25 12:22:49 +0900459 ATA_BMDMA_SHT(DRV_NAME),
Jeff Garzik669a5db2006-08-29 18:12:40 -0400460};
461
462static struct ata_port_operations via_port_ops = {
Tejun Heo029cfd62008-03-25 12:22:49 +0900463 .inherits = &ata_bmdma_port_ops,
464 .cable_detect = via_cable_detect,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400465 .set_piomode = via_set_piomode,
466 .set_dmamode = via_set_dmamode,
Tejun Heoa1efdab2008-03-25 12:22:50 +0900467 .prereset = via_pre_reset,
Tejun Heoff047152008-07-31 18:02:35 +0900468 .sff_tf_load = via_tf_load,
Alan Coxb4746ed2009-04-17 12:21:21 +0100469 .port_start = via_port_start,
Alan Cox10734fc2009-11-30 13:22:43 +0000470 .mode_filter = via_mode_filter,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400471};
472
473static struct ata_port_operations via_port_ops_noirq = {
Tejun Heo029cfd62008-03-25 12:22:49 +0900474 .inherits = &via_port_ops,
Tejun Heo5682ed32008-04-07 22:47:16 +0900475 .sff_data_xfer = ata_sff_data_xfer_noirq,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400476};
477
478/**
Alan627d2d32006-11-27 16:19:36 +0000479 * via_config_fifo - set up the FIFO
480 * @pdev: PCI device
481 * @flags: configuration flags
482 *
Robert P. J. Day3a4fa0a2007-10-19 23:10:43 +0200483 * Set the FIFO properties for this device if necessary. Used both on
Alan627d2d32006-11-27 16:19:36 +0000484 * set up and on and the resume path
485 */
486
487static void via_config_fifo(struct pci_dev *pdev, unsigned int flags)
488{
489 u8 enable;
Jeff Garzikf20b16f2006-12-11 11:14:06 -0500490
Alan627d2d32006-11-27 16:19:36 +0000491 /* 0x40 low bits indicate enabled channels */
492 pci_read_config_byte(pdev, 0x40 , &enable);
493 enable &= 3;
Jeff Garzikf20b16f2006-12-11 11:14:06 -0500494
Alan627d2d32006-11-27 16:19:36 +0000495 if (flags & VIA_SET_FIFO) {
Andrew Morton73720862006-12-20 13:09:10 -0500496 static const u8 fifo_setting[4] = {0x00, 0x60, 0x00, 0x20};
Alan627d2d32006-11-27 16:19:36 +0000497 u8 fifo;
498
499 pci_read_config_byte(pdev, 0x43, &fifo);
500
501 /* Clear PREQ# until DDACK# for errata */
502 if (flags & VIA_BAD_PREQ)
503 fifo &= 0x7F;
504 else
505 fifo &= 0x9f;
506 /* Turn on FIFO for enabled channels */
507 fifo |= fifo_setting[enable];
508 pci_write_config_byte(pdev, 0x43, fifo);
509 }
510}
511
512/**
Jeff Garzik669a5db2006-08-29 18:12:40 -0400513 * via_init_one - discovery callback
Alan627d2d32006-11-27 16:19:36 +0000514 * @pdev: PCI device
Jeff Garzik669a5db2006-08-29 18:12:40 -0400515 * @id: PCI table info
516 *
517 * A VIA IDE interface has been discovered. Figure out what revision
518 * and perform configuration work before handing it to the ATA layer
519 */
520
521static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
522{
523 /* Early VIA without UDMA support */
Tejun Heo1626aeb2007-05-04 12:43:58 +0200524 static const struct ata_port_info via_mwdma_info = {
Tejun Heo464cf172007-05-27 15:10:40 +0200525 .flags = ATA_FLAG_SLAVE_POSS,
Erik Inge Bolsø14bdef92009-03-14 21:38:24 +0100526 .pio_mask = ATA_PIO4,
527 .mwdma_mask = ATA_MWDMA2,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400528 .port_ops = &via_port_ops
529 };
530 /* Ditto with IRQ masking required */
Tejun Heo1626aeb2007-05-04 12:43:58 +0200531 static const struct ata_port_info via_mwdma_info_borked = {
Tejun Heo464cf172007-05-27 15:10:40 +0200532 .flags = ATA_FLAG_SLAVE_POSS,
Erik Inge Bolsø14bdef92009-03-14 21:38:24 +0100533 .pio_mask = ATA_PIO4,
534 .mwdma_mask = ATA_MWDMA2,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400535 .port_ops = &via_port_ops_noirq,
536 };
537 /* VIA UDMA 33 devices (and borked 66) */
Tejun Heo1626aeb2007-05-04 12:43:58 +0200538 static const struct ata_port_info via_udma33_info = {
Tejun Heo464cf172007-05-27 15:10:40 +0200539 .flags = ATA_FLAG_SLAVE_POSS,
Erik Inge Bolsø14bdef92009-03-14 21:38:24 +0100540 .pio_mask = ATA_PIO4,
541 .mwdma_mask = ATA_MWDMA2,
Jeff Garzikbf6263a2007-07-09 12:16:50 -0400542 .udma_mask = ATA_UDMA2,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400543 .port_ops = &via_port_ops
544 };
545 /* VIA UDMA 66 devices */
Tejun Heo1626aeb2007-05-04 12:43:58 +0200546 static const struct ata_port_info via_udma66_info = {
Tejun Heo464cf172007-05-27 15:10:40 +0200547 .flags = ATA_FLAG_SLAVE_POSS,
Erik Inge Bolsø14bdef92009-03-14 21:38:24 +0100548 .pio_mask = ATA_PIO4,
549 .mwdma_mask = ATA_MWDMA2,
Jeff Garzikbf6263a2007-07-09 12:16:50 -0400550 .udma_mask = ATA_UDMA4,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400551 .port_ops = &via_port_ops
552 };
553 /* VIA UDMA 100 devices */
Tejun Heo1626aeb2007-05-04 12:43:58 +0200554 static const struct ata_port_info via_udma100_info = {
Tejun Heo464cf172007-05-27 15:10:40 +0200555 .flags = ATA_FLAG_SLAVE_POSS,
Erik Inge Bolsø14bdef92009-03-14 21:38:24 +0100556 .pio_mask = ATA_PIO4,
557 .mwdma_mask = ATA_MWDMA2,
Jeff Garzikbf6263a2007-07-09 12:16:50 -0400558 .udma_mask = ATA_UDMA5,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400559 .port_ops = &via_port_ops
560 };
561 /* UDMA133 with bad AST (All current 133) */
Tejun Heo1626aeb2007-05-04 12:43:58 +0200562 static const struct ata_port_info via_udma133_info = {
Tejun Heo464cf172007-05-27 15:10:40 +0200563 .flags = ATA_FLAG_SLAVE_POSS,
Erik Inge Bolsø14bdef92009-03-14 21:38:24 +0100564 .pio_mask = ATA_PIO4,
565 .mwdma_mask = ATA_MWDMA2,
Jeff Garzikbf6263a2007-07-09 12:16:50 -0400566 .udma_mask = ATA_UDMA6, /* FIXME: should check north bridge */
Jeff Garzik669a5db2006-08-29 18:12:40 -0400567 .port_ops = &via_port_ops
568 };
Tejun Heo887125e2008-03-25 12:22:49 +0900569 const struct ata_port_info *ppi[] = { NULL, NULL };
Jiri Slaby7095e3e2009-11-04 17:11:03 +0100570 struct pci_dev *isa;
Jeff Garzik669a5db2006-08-29 18:12:40 -0400571 const struct via_isa_bridge *config;
Jeff Garzik669a5db2006-08-29 18:12:40 -0400572 u8 enable;
573 u32 timing;
JosephChan@via.com.twe4d866c2009-01-23 15:37:39 +0800574 unsigned long flags = id->driver_data;
Tejun Heof08048e2008-03-25 12:22:47 +0900575 int rc;
Jeff Garzik669a5db2006-08-29 18:12:40 -0400576
Joe Perches06296a12011-04-15 15:52:00 -0700577 ata_print_version_once(&pdev->dev, DRV_VERSION);
Jeff Garzik669a5db2006-08-29 18:12:40 -0400578
Tejun Heof08048e2008-03-25 12:22:47 +0900579 rc = pcim_enable_device(pdev);
580 if (rc)
581 return rc;
582
JosephChan@via.com.twe4d866c2009-01-23 15:37:39 +0800583 if (flags & VIA_IDFLAG_SINGLE)
584 ppi[1] = &ata_dummy_port_info;
585
Jeff Garzik669a5db2006-08-29 18:12:40 -0400586 /* To find out how the IDE will behave and what features we
587 actually have to look at the bridge not the IDE controller */
JosephChan@via.com.twe4d866c2009-01-23 15:37:39 +0800588 for (config = via_isa_bridges; config->id != PCI_DEVICE_ID_VIA_ANON;
589 config++)
Jeff Garzik669a5db2006-08-29 18:12:40 -0400590 if ((isa = pci_get_device(PCI_VENDOR_ID_VIA +
591 !!(config->flags & VIA_BAD_ID),
592 config->id, NULL))) {
Jiri Slaby7095e3e2009-11-04 17:11:03 +0100593 u8 rev = isa->revision;
Jeff Garzik669a5db2006-08-29 18:12:40 -0400594 pci_dev_put(isa);
Jeff Garzik669a5db2006-08-29 18:12:40 -0400595
JosephChan@via.com.twbc8a6732010-03-25 20:51:47 +0800596 if ((id->device == 0x0415 || id->device == 0x3164) &&
597 (config->id != id->device))
598 continue;
599
Jiri Slaby7095e3e2009-11-04 17:11:03 +0100600 if (rev >= config->rev_min && rev <= config->rev_max)
601 break;
602 }
Jeff Garzik669a5db2006-08-29 18:12:40 -0400603
Alan Cox11f64002008-04-29 14:10:57 +0100604 if (!(config->flags & VIA_NO_ENABLES)) {
605 /* 0x40 low bits indicate enabled channels */
606 pci_read_config_byte(pdev, 0x40 , &enable);
607 enable &= 3;
608 if (enable == 0)
609 return -ENODEV;
Jeff Garzik669a5db2006-08-29 18:12:40 -0400610 }
611
612 /* Initialise the FIFO for the enabled channels. */
Alan627d2d32006-11-27 16:19:36 +0000613 via_config_fifo(pdev, config->flags);
Jeff Garzikf20b16f2006-12-11 11:14:06 -0500614
Jeff Garzik669a5db2006-08-29 18:12:40 -0400615 /* Clock set up */
Bartlomiej Zolnierkiewicz460f5312010-01-18 18:17:12 +0100616 switch (config->udma_mask) {
617 case 0x00:
618 if (config->flags & VIA_NO_UNMASK)
619 ppi[0] = &via_mwdma_info_borked;
620 else
621 ppi[0] = &via_mwdma_info;
622 break;
623 case ATA_UDMA2:
624 ppi[0] = &via_udma33_info;
625 break;
626 case ATA_UDMA4:
627 ppi[0] = &via_udma66_info;
628 break;
629 case ATA_UDMA5:
630 ppi[0] = &via_udma100_info;
631 break;
632 case ATA_UDMA6:
633 ppi[0] = &via_udma133_info;
634 break;
635 default:
636 WARN_ON(1);
637 return -ENODEV;
638 }
Jeff Garzik669a5db2006-08-29 18:12:40 -0400639
640 if (config->flags & VIA_BAD_CLK66) {
641 /* Disable the 66MHz clock on problem devices */
642 pci_read_config_dword(pdev, 0x50, &timing);
643 timing &= ~0x80008;
644 pci_write_config_dword(pdev, 0x50, timing);
645 }
646
647 /* We have established the device type, now fire it up */
Tejun Heo1c5afdf2010-05-19 22:10:22 +0200648 return ata_pci_bmdma_init_one(pdev, ppi, &via_sht, (void *)config, 0);
Jeff Garzik669a5db2006-08-29 18:12:40 -0400649}
650
Tejun Heo438ac6d2007-03-02 17:31:26 +0900651#ifdef CONFIG_PM
Alan627d2d32006-11-27 16:19:36 +0000652/**
653 * via_reinit_one - reinit after resume
654 * @pdev; PCI device
655 *
656 * Called when the VIA PATA device is resumed. We must then
657 * reconfigure the fifo and other setup we may have altered. In
658 * addition the kernel needs to have the resume methods on PCI
659 * quirk supported.
660 */
661
662static int via_reinit_one(struct pci_dev *pdev)
663{
664 u32 timing;
665 struct ata_host *host = dev_get_drvdata(&pdev->dev);
666 const struct via_isa_bridge *config = host->private_data;
Tejun Heof08048e2008-03-25 12:22:47 +0900667 int rc;
668
669 rc = ata_pci_device_do_resume(pdev);
670 if (rc)
671 return rc;
Jeff Garzikf20b16f2006-12-11 11:14:06 -0500672
Alan627d2d32006-11-27 16:19:36 +0000673 via_config_fifo(pdev, config->flags);
674
Bartlomiej Zolnierkiewicz460f5312010-01-18 18:17:12 +0100675 if (config->udma_mask == ATA_UDMA4) {
Alan627d2d32006-11-27 16:19:36 +0000676 /* The 66 MHz devices require we enable the clock */
677 pci_read_config_dword(pdev, 0x50, &timing);
678 timing |= 0x80008;
679 pci_write_config_dword(pdev, 0x50, timing);
680 }
681 if (config->flags & VIA_BAD_CLK66) {
682 /* Disable the 66MHz clock on problem devices */
683 pci_read_config_dword(pdev, 0x50, &timing);
684 timing &= ~0x80008;
685 pci_write_config_dword(pdev, 0x50, timing);
686 }
Tejun Heof08048e2008-03-25 12:22:47 +0900687
688 ata_host_resume(host);
689 return 0;
Alan627d2d32006-11-27 16:19:36 +0000690}
Tejun Heo438ac6d2007-03-02 17:31:26 +0900691#endif
Alan627d2d32006-11-27 16:19:36 +0000692
Jeff Garzik669a5db2006-08-29 18:12:40 -0400693static const struct pci_device_id via[] = {
Zlatko Calusic5955c7a2009-02-18 01:33:34 +0100694 { PCI_VDEVICE(VIA, 0x0415), },
Jeff Garzik52df0ee2007-05-25 05:02:06 -0400695 { PCI_VDEVICE(VIA, 0x0571), },
696 { PCI_VDEVICE(VIA, 0x0581), },
697 { PCI_VDEVICE(VIA, 0x1571), },
698 { PCI_VDEVICE(VIA, 0x3164), },
699 { PCI_VDEVICE(VIA, 0x5324), },
JosephChan@via.com.twe4d866c2009-01-23 15:37:39 +0800700 { PCI_VDEVICE(VIA, 0xC409), VIA_IDFLAG_SINGLE },
JosephChan@via.com.tw4f1deba2010-03-19 14:08:11 +0800701 { PCI_VDEVICE(VIA, 0x9001), VIA_IDFLAG_SINGLE },
Jeff Garzik2d2744f2006-09-28 20:21:59 -0400702
703 { },
Jeff Garzik669a5db2006-08-29 18:12:40 -0400704};
705
706static struct pci_driver via_pci_driver = {
Jeff Garzik2d2744f2006-09-28 20:21:59 -0400707 .name = DRV_NAME,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400708 .id_table = via,
709 .probe = via_init_one,
Alan627d2d32006-11-27 16:19:36 +0000710 .remove = ata_pci_remove_one,
Tejun Heo438ac6d2007-03-02 17:31:26 +0900711#ifdef CONFIG_PM
Alan627d2d32006-11-27 16:19:36 +0000712 .suspend = ata_pci_device_suspend,
713 .resume = via_reinit_one,
Tejun Heo438ac6d2007-03-02 17:31:26 +0900714#endif
Jeff Garzik669a5db2006-08-29 18:12:40 -0400715};
716
717static int __init via_init(void)
718{
719 return pci_register_driver(&via_pci_driver);
720}
721
Jeff Garzik669a5db2006-08-29 18:12:40 -0400722static void __exit via_exit(void)
723{
724 pci_unregister_driver(&via_pci_driver);
725}
726
Jeff Garzik669a5db2006-08-29 18:12:40 -0400727MODULE_AUTHOR("Alan Cox");
728MODULE_DESCRIPTION("low-level driver for VIA PATA");
729MODULE_LICENSE("GPL");
730MODULE_DEVICE_TABLE(pci, via);
731MODULE_VERSION(DRV_VERSION);
732
733module_init(via_init);
734module_exit(via_exit);