blob: 9082b84aeebb54cd7831256937f85299dd07a039 [file] [log] [blame]
Dan Williams285f5fa2006-12-07 02:59:39 +01001/*
2 * iop13xx PCI support
3 * Copyright (c) 2005-2006, Intel Corporation.
4 *
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms and conditions of the GNU General Public License,
7 * version 2, as published by the Free Software Foundation.
8 *
9 * This program is distributed in the hope it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
12 * more details.
13 *
14 * You should have received a copy of the GNU General Public License along with
15 * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
16 * Place - Suite 330, Boston, MA 02111-1307 USA.
17 *
18 */
19
20#include <linux/pci.h>
Tejun Heo5a0e3ad2010-03-24 17:04:11 +090021#include <linux/slab.h>
Dan Williams285f5fa2006-12-07 02:59:39 +010022#include <linux/delay.h>
Alexey Dobriyane8edc6e2007-05-21 01:22:52 +040023#include <linux/jiffies.h>
Paul Gortmakerdc280942011-07-31 16:17:29 -040024#include <linux/export.h>
Dan Williams285f5fa2006-12-07 02:59:39 +010025#include <asm/irq.h>
Russell Kinga09e64f2008-08-05 16:14:15 +010026#include <mach/hardware.h>
Dan Williams285f5fa2006-12-07 02:59:39 +010027#include <asm/sizes.h>
Alexey Dobriyane8edc6e2007-05-21 01:22:52 +040028#include <asm/signal.h>
Dan Williams285f5fa2006-12-07 02:59:39 +010029#include <asm/mach/pci.h>
Russell Kinga09e64f2008-08-05 16:14:15 +010030#include <mach/pci.h>
Dan Williams285f5fa2006-12-07 02:59:39 +010031
32#define IOP13XX_PCI_DEBUG 0
33#define PRINTK(x...) ((void)(IOP13XX_PCI_DEBUG && printk(x)))
34
35u32 iop13xx_atux_pmmr_offset; /* This offset can change based on strapping */
36u32 iop13xx_atue_pmmr_offset; /* This offset can change based on strapping */
37static struct pci_bus *pci_bus_atux = 0;
38static struct pci_bus *pci_bus_atue = 0;
Arnd Bergmannabf2ba12012-09-14 20:17:50 +000039void __iomem *iop13xx_atue_mem_base;
40void __iomem *iop13xx_atux_mem_base;
Dan Williams285f5fa2006-12-07 02:59:39 +010041size_t iop13xx_atue_mem_size;
42size_t iop13xx_atux_mem_size;
Dan Williams285f5fa2006-12-07 02:59:39 +010043
44EXPORT_SYMBOL(iop13xx_atue_mem_base);
45EXPORT_SYMBOL(iop13xx_atux_mem_base);
46EXPORT_SYMBOL(iop13xx_atue_mem_size);
47EXPORT_SYMBOL(iop13xx_atux_mem_size);
48
49int init_atu = 0; /* Flag to select which ATU(s) to initialize / disable */
50static unsigned long atux_trhfa_timeout = 0; /* Trhfa = RST# high to first
51 access */
52
53/* Scan the initialized busses and ioremap the requested memory range
54 */
55void iop13xx_map_pci_memory(void)
56{
57 int atu;
58 struct pci_bus *bus;
59 struct pci_dev *dev;
60 resource_size_t end = 0;
61
62 for (atu = 0; atu < 2; atu++) {
63 bus = atu ? pci_bus_atue : pci_bus_atux;
64 if (bus) {
65 list_for_each_entry(dev, &bus->devices, bus_list) {
66 int i;
67 int max = 7;
68
69 if (dev->subordinate)
70 max = DEVICE_COUNT_RESOURCE;
71
72 for (i = 0; i < max; i++) {
73 struct resource *res = &dev->resource[i];
74 if (res->flags & IORESOURCE_MEM)
75 end = max(res->end, end);
76 }
77 }
78
79 switch(atu) {
80 case 0:
81 iop13xx_atux_mem_size =
82 (end - IOP13XX_PCIX_LOWER_MEM_RA) + 1;
83
84 /* 16MB align the request */
85 if (iop13xx_atux_mem_size & (SZ_16M - 1)) {
86 iop13xx_atux_mem_size &= ~(SZ_16M - 1);
87 iop13xx_atux_mem_size += SZ_16M;
88 }
89
90 if (end) {
Arnd Bergmannabf2ba12012-09-14 20:17:50 +000091 iop13xx_atux_mem_base = __arm_ioremap_pfn(
Dan Williams285f5fa2006-12-07 02:59:39 +010092 __phys_to_pfn(IOP13XX_PCIX_LOWER_MEM_PA)
Russell King3603ab22007-05-05 20:59:27 +010093 , 0, iop13xx_atux_mem_size, MT_DEVICE);
Dan Williams285f5fa2006-12-07 02:59:39 +010094 if (!iop13xx_atux_mem_base) {
95 printk("%s: atux allocation "
Harvey Harrison8e86f422008-03-04 15:08:02 -080096 "failed\n", __func__);
Dan Williams285f5fa2006-12-07 02:59:39 +010097 BUG();
98 }
99 } else
100 iop13xx_atux_mem_size = 0;
Arnd Bergmannabf2ba12012-09-14 20:17:50 +0000101 PRINTK("%s: atu: %d bus_size: %d mem_base: %p\n",
Harvey Harrison8e86f422008-03-04 15:08:02 -0800102 __func__, atu, iop13xx_atux_mem_size,
Dan Williams285f5fa2006-12-07 02:59:39 +0100103 iop13xx_atux_mem_base);
104 break;
105 case 1:
106 iop13xx_atue_mem_size =
107 (end - IOP13XX_PCIE_LOWER_MEM_RA) + 1;
108
109 /* 16MB align the request */
110 if (iop13xx_atue_mem_size & (SZ_16M - 1)) {
111 iop13xx_atue_mem_size &= ~(SZ_16M - 1);
112 iop13xx_atue_mem_size += SZ_16M;
113 }
114
115 if (end) {
Arnd Bergmannabf2ba12012-09-14 20:17:50 +0000116 iop13xx_atue_mem_base = __arm_ioremap_pfn(
Dan Williams285f5fa2006-12-07 02:59:39 +0100117 __phys_to_pfn(IOP13XX_PCIE_LOWER_MEM_PA)
Russell King3603ab22007-05-05 20:59:27 +0100118 , 0, iop13xx_atue_mem_size, MT_DEVICE);
Dan Williams285f5fa2006-12-07 02:59:39 +0100119 if (!iop13xx_atue_mem_base) {
120 printk("%s: atue allocation "
Harvey Harrison8e86f422008-03-04 15:08:02 -0800121 "failed\n", __func__);
Dan Williams285f5fa2006-12-07 02:59:39 +0100122 BUG();
123 }
124 } else
125 iop13xx_atue_mem_size = 0;
Arnd Bergmannabf2ba12012-09-14 20:17:50 +0000126 PRINTK("%s: atu: %d bus_size: %d mem_base: %p\n",
Harvey Harrison8e86f422008-03-04 15:08:02 -0800127 __func__, atu, iop13xx_atue_mem_size,
Dan Williams285f5fa2006-12-07 02:59:39 +0100128 iop13xx_atue_mem_base);
129 break;
130 }
131
Arnd Bergmannabf2ba12012-09-14 20:17:50 +0000132 printk("%s: Initialized (%uM @ resource/virtual: %08lx/%p)\n",
Dan Williams285f5fa2006-12-07 02:59:39 +0100133 atu ? "ATUE" : "ATUX",
134 (atu ? iop13xx_atue_mem_size : iop13xx_atux_mem_size) /
135 SZ_1M,
136 atu ? IOP13XX_PCIE_LOWER_MEM_RA :
137 IOP13XX_PCIX_LOWER_MEM_RA,
138 atu ? iop13xx_atue_mem_base :
139 iop13xx_atux_mem_base);
140 end = 0;
141 }
142
143 }
144}
145
Dan Williamsd73d8012007-05-15 01:03:36 +0100146static int iop13xx_atu_function(int atu)
Dan Williams285f5fa2006-12-07 02:59:39 +0100147{
148 int func = 0;
149 /* the function number depends on the value of the
150 * IOP13XX_INTERFACE_SEL_PCIX reset strap
151 * see C-Spec section 3.17
152 */
153 switch(atu) {
154 case IOP13XX_INIT_ATU_ATUX:
155 if (__raw_readl(IOP13XX_ESSR0) & IOP13XX_INTERFACE_SEL_PCIX)
156 func = 5;
157 else
158 func = 0;
159 break;
160 case IOP13XX_INIT_ATU_ATUE:
161 if (__raw_readl(IOP13XX_ESSR0) & IOP13XX_INTERFACE_SEL_PCIX)
162 func = 0;
163 else
164 func = 5;
165 break;
166 default:
167 BUG();
168 }
169
170 return func;
171}
172
173/* iop13xx_atux_cfg_address - format a configuration address for atux
174 * @bus: Target bus to access
175 * @devfn: Combined device number and function number
176 * @where: Desired register's address offset
177 *
178 * Convert the parameters to a configuration address formatted
179 * according the PCI-X 2.0 specification
180 */
181static u32 iop13xx_atux_cfg_address(struct pci_bus *bus, int devfn, int where)
182{
183 struct pci_sys_data *sys = bus->sysdata;
184 u32 addr;
185
186 if (sys->busnr == bus->number)
187 addr = 1 << (PCI_SLOT(devfn) + 16) | (PCI_SLOT(devfn) << 11);
188 else
189 addr = bus->number << 16 | PCI_SLOT(devfn) << 11 | 1;
190
191 addr |= PCI_FUNC(devfn) << 8 | ((where & 0xff) & ~3);
192 addr |= ((where & 0xf00) >> 8) << 24; /* upper register number */
193
194 return addr;
195}
196
197/* iop13xx_atue_cfg_address - format a configuration address for atue
198 * @bus: Target bus to access
199 * @devfn: Combined device number and function number
200 * @where: Desired register's address offset
201 *
202 * Convert the parameters to an address usable by the ATUE_OCCAR
203 */
204static u32 iop13xx_atue_cfg_address(struct pci_bus *bus, int devfn, int where)
205{
206 struct pci_sys_data *sys = bus->sysdata;
207 u32 addr;
208
209 PRINTK("iop13xx_atue_cfg_address: bus: %d dev: %d func: %d",
210 bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn));
211 addr = ((u32) bus->number) << IOP13XX_ATUE_OCCAR_BUS_NUM |
212 ((u32) PCI_SLOT(devfn)) << IOP13XX_ATUE_OCCAR_DEV_NUM |
213 ((u32) PCI_FUNC(devfn)) << IOP13XX_ATUE_OCCAR_FUNC_NUM |
214 (where & ~0x3);
215
216 if (sys->busnr != bus->number)
217 addr |= 1; /* type 1 access */
218
219 return addr;
220}
221
222/* This routine checks the status of the last configuration cycle. If an error
223 * was detected it returns >0, else it returns a 0. The errors being checked
224 * are parity, master abort, target abort (master and target). These types of
Lucas De Marchi25985ed2011-03-30 22:57:33 -0300225 * errors occur during a config cycle where there is no device, like during
Dan Williams285f5fa2006-12-07 02:59:39 +0100226 * the discovery stage.
227 */
228static int iop13xx_atux_pci_status(int clear)
229{
230 unsigned int status;
231 int err = 0;
232
233 /*
234 * Check the status registers.
235 */
236 status = __raw_readw(IOP13XX_ATUX_ATUSR);
237 if (status & IOP_PCI_STATUS_ERROR)
238 {
239 PRINTK("\t\t\tPCI error: ATUSR %#08x", status);
240 if(clear)
241 __raw_writew(status & IOP_PCI_STATUS_ERROR,
242 IOP13XX_ATUX_ATUSR);
243 err = 1;
244 }
245 status = __raw_readl(IOP13XX_ATUX_ATUISR);
246 if (status & IOP13XX_ATUX_ATUISR_ERROR)
247 {
248 PRINTK("\t\t\tPCI error interrupt: ATUISR %#08x", status);
249 if(clear)
250 __raw_writel(status & IOP13XX_ATUX_ATUISR_ERROR,
251 IOP13XX_ATUX_ATUISR);
252 err = 1;
253 }
254 return err;
255}
256
257/* Simply write the address register and read the configuration
258 * data. Note that the data dependency on %0 encourages an abort
259 * to be detected before we return.
260 */
Dan Williamsd73d8012007-05-15 01:03:36 +0100261static u32 iop13xx_atux_read(unsigned long addr)
Dan Williams285f5fa2006-12-07 02:59:39 +0100262{
263 u32 val;
264
265 __asm__ __volatile__(
266 "str %1, [%2]\n\t"
267 "ldr %0, [%3]\n\t"
268 "mov %0, %0\n\t"
269 : "=r" (val)
270 : "r" (addr), "r" (IOP13XX_ATUX_OCCAR), "r" (IOP13XX_ATUX_OCCDR));
271
272 return val;
273}
274
275/* The read routines must check the error status of the last configuration
276 * cycle. If there was an error, the routine returns all hex f's.
277 */
278static int
279iop13xx_atux_read_config(struct pci_bus *bus, unsigned int devfn, int where,
280 int size, u32 *value)
281{
282 unsigned long addr = iop13xx_atux_cfg_address(bus, devfn, where);
283 u32 val = iop13xx_atux_read(addr) >> ((where & 3) * 8);
284
285 if (iop13xx_atux_pci_status(1) || is_atux_occdr_error()) {
286 __raw_writel(__raw_readl(IOP13XX_XBG_BECSR) & 3,
287 IOP13XX_XBG_BECSR);
288 val = 0xffffffff;
289 }
290
291 *value = val;
292
293 return PCIBIOS_SUCCESSFUL;
294}
295
296static int
297iop13xx_atux_write_config(struct pci_bus *bus, unsigned int devfn, int where,
298 int size, u32 value)
299{
300 unsigned long addr = iop13xx_atux_cfg_address(bus, devfn, where);
301 u32 val;
302
303 if (size != 4) {
304 val = iop13xx_atux_read(addr);
305 if (!iop13xx_atux_pci_status(1) == 0)
306 return PCIBIOS_SUCCESSFUL;
307
308 where = (where & 3) * 8;
309
310 if (size == 1)
311 val &= ~(0xff << where);
312 else
313 val &= ~(0xffff << where);
314
315 __raw_writel(val | value << where, IOP13XX_ATUX_OCCDR);
316 } else {
317 __raw_writel(addr, IOP13XX_ATUX_OCCAR);
318 __raw_writel(value, IOP13XX_ATUX_OCCDR);
319 }
320
321 return PCIBIOS_SUCCESSFUL;
322}
323
324static struct pci_ops iop13xx_atux_ops = {
325 .read = iop13xx_atux_read_config,
326 .write = iop13xx_atux_write_config,
327};
328
329/* This routine checks the status of the last configuration cycle. If an error
330 * was detected it returns >0, else it returns a 0. The errors being checked
331 * are parity, master abort, target abort (master and target). These types of
Lucas De Marchi25985ed2011-03-30 22:57:33 -0300332 * errors occur during a config cycle where there is no device, like during
Dan Williams285f5fa2006-12-07 02:59:39 +0100333 * the discovery stage.
334 */
335static int iop13xx_atue_pci_status(int clear)
336{
337 unsigned int status;
338 int err = 0;
339
340 /*
341 * Check the status registers.
342 */
343
344 /* standard pci status register */
345 status = __raw_readw(IOP13XX_ATUE_ATUSR);
346 if (status & IOP_PCI_STATUS_ERROR) {
347 PRINTK("\t\t\tPCI error: ATUSR %#08x", status);
348 if(clear)
349 __raw_writew(status & IOP_PCI_STATUS_ERROR,
350 IOP13XX_ATUE_ATUSR);
351 err++;
352 }
353
354 /* check the normal status bits in the ATUISR */
355 status = __raw_readl(IOP13XX_ATUE_ATUISR);
356 if (status & IOP13XX_ATUE_ATUISR_ERROR) {
357 PRINTK("\t\t\tPCI error: ATUISR %#08x", status);
358 if (clear)
359 __raw_writew(status & IOP13XX_ATUE_ATUISR_ERROR,
360 IOP13XX_ATUE_ATUISR);
361 err++;
362
363 /* check the PCI-E status if the ATUISR reports an interface error */
364 if (status & IOP13XX_ATUE_STAT_PCI_IFACE_ERR) {
365 /* get the unmasked errors */
366 status = __raw_readl(IOP13XX_ATUE_PIE_STS) &
367 ~(__raw_readl(IOP13XX_ATUE_PIE_MSK));
368
369 if (status) {
370 PRINTK("\t\t\tPCI-E error: ATUE_PIE_STS %#08x",
371 __raw_readl(IOP13XX_ATUE_PIE_STS));
372 err++;
373 } else {
374 PRINTK("\t\t\tPCI-E error: ATUE_PIE_STS %#08x",
375 __raw_readl(IOP13XX_ATUE_PIE_STS));
376 PRINTK("\t\t\tPCI-E error: ATUE_PIE_MSK %#08x",
377 __raw_readl(IOP13XX_ATUE_PIE_MSK));
378 BUG();
379 }
380
381 if(clear)
382 __raw_writel(status, IOP13XX_ATUE_PIE_STS);
383 }
384 }
385
386 return err;
387}
388
Dan Williamsd73d8012007-05-15 01:03:36 +0100389static int
Ralf Baechled5341942011-06-10 15:30:21 +0100390iop13xx_pcie_map_irq(const struct pci_dev *dev, u8 idsel, u8 pin)
Dan Williams285f5fa2006-12-07 02:59:39 +0100391{
392 WARN_ON(idsel != 0);
393
394 switch (pin) {
395 case 1: return ATUE_INTA;
396 case 2: return ATUE_INTB;
397 case 3: return ATUE_INTC;
398 case 4: return ATUE_INTD;
399 default: return -1;
400 }
401}
402
Dan Williamsd73d8012007-05-15 01:03:36 +0100403static u32 iop13xx_atue_read(unsigned long addr)
Dan Williams285f5fa2006-12-07 02:59:39 +0100404{
405 u32 val;
406
407 __raw_writel(addr, IOP13XX_ATUE_OCCAR);
408 val = __raw_readl(IOP13XX_ATUE_OCCDR);
409
410 rmb();
411
412 return val;
413}
414
415/* The read routines must check the error status of the last configuration
416 * cycle. If there was an error, the routine returns all hex f's.
417 */
418static int
419iop13xx_atue_read_config(struct pci_bus *bus, unsigned int devfn, int where,
420 int size, u32 *value)
421{
422 u32 val;
423 unsigned long addr = iop13xx_atue_cfg_address(bus, devfn, where);
424
425 /* Hide device numbers > 0 on the local PCI-E bus (Type 0 access) */
426 if (!PCI_SLOT(devfn) || (addr & 1)) {
427 val = iop13xx_atue_read(addr) >> ((where & 3) * 8);
428 if( iop13xx_atue_pci_status(1) || is_atue_occdr_error() ) {
429 __raw_writel(__raw_readl(IOP13XX_XBG_BECSR) & 3,
430 IOP13XX_XBG_BECSR);
431 val = 0xffffffff;
432 }
433
434 PRINTK("addr=%#0lx, val=%#010x", addr, val);
435 } else
436 val = 0xffffffff;
437
438 *value = val;
439
440 return PCIBIOS_SUCCESSFUL;
441}
442
443static int
444iop13xx_atue_write_config(struct pci_bus *bus, unsigned int devfn, int where,
445 int size, u32 value)
446{
447 unsigned long addr = iop13xx_atue_cfg_address(bus, devfn, where);
448 u32 val;
449
450 if (size != 4) {
451 val = iop13xx_atue_read(addr);
452 if (!iop13xx_atue_pci_status(1) == 0)
453 return PCIBIOS_SUCCESSFUL;
454
455 where = (where & 3) * 8;
456
457 if (size == 1)
458 val &= ~(0xff << where);
459 else
460 val &= ~(0xffff << where);
461
462 __raw_writel(val | value << where, IOP13XX_ATUE_OCCDR);
463 } else {
464 __raw_writel(addr, IOP13XX_ATUE_OCCAR);
465 __raw_writel(value, IOP13XX_ATUE_OCCDR);
466 }
467
468 return PCIBIOS_SUCCESSFUL;
469}
470
471static struct pci_ops iop13xx_atue_ops = {
472 .read = iop13xx_atue_read_config,
473 .write = iop13xx_atue_write_config,
474};
475
476/* When a PCI device does not exist during config cycles, the XScale gets a
477 * bus error instead of returning 0xffffffff. We can't rely on the ATU status
478 * bits to tell us that it was indeed a configuration cycle that caused this
479 * error especially in the case when the ATUE link is down. Instead we rely
480 * on data from the south XSI bridge to validate the abort
481 */
482int
483iop13xx_pci_abort(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
484{
485 PRINTK("Data abort: address = 0x%08lx "
486 "fsr = 0x%03x PC = 0x%08lx LR = 0x%08lx",
487 addr, fsr, regs->ARM_pc, regs->ARM_lr);
488
489 PRINTK("IOP13XX_XBG_BECSR: %#10x", __raw_readl(IOP13XX_XBG_BECSR));
490 PRINTK("IOP13XX_XBG_BERAR: %#10x", __raw_readl(IOP13XX_XBG_BERAR));
491 PRINTK("IOP13XX_XBG_BERUAR: %#10x", __raw_readl(IOP13XX_XBG_BERUAR));
492
493 /* If it was an imprecise abort, then we need to correct the
494 * return address to be _after_ the instruction.
495 */
496 if (fsr & (1 << 10))
497 regs->ARM_pc += 4;
498
499 if (is_atue_occdr_error() || is_atux_occdr_error())
500 return 0;
501 else
502 return 1;
503}
504
505/* Scan an IOP13XX PCI bus. nr selects which ATU we use.
506 */
Greg Kroah-Hartman351a1022012-12-21 14:02:24 -0800507struct pci_bus *iop13xx_scan_bus(int nr, struct pci_sys_data *sys)
Dan Williams285f5fa2006-12-07 02:59:39 +0100508{
509 int which_atu;
510 struct pci_bus *bus = NULL;
511
512 switch (init_atu) {
513 case IOP13XX_INIT_ATU_ATUX:
514 which_atu = nr ? 0 : IOP13XX_INIT_ATU_ATUX;
515 break;
516 case IOP13XX_INIT_ATU_ATUE:
517 which_atu = nr ? 0 : IOP13XX_INIT_ATU_ATUE;
518 break;
519 case (IOP13XX_INIT_ATU_ATUX | IOP13XX_INIT_ATU_ATUE):
520 which_atu = nr ? IOP13XX_INIT_ATU_ATUE : IOP13XX_INIT_ATU_ATUX;
521 break;
522 default:
523 which_atu = 0;
524 }
525
526 if (!which_atu) {
527 BUG();
528 return NULL;
529 }
530
531 switch (which_atu) {
532 case IOP13XX_INIT_ATU_ATUX:
533 if (time_after_eq(jiffies + msecs_to_jiffies(1000),
534 atux_trhfa_timeout)) /* ensure not wrap */
535 while(time_before(jiffies, atux_trhfa_timeout))
536 udelay(100);
537
Bjorn Helgaas37d15902011-10-28 16:26:16 -0600538 bus = pci_bus_atux = pci_scan_root_bus(NULL, sys->busnr,
539 &iop13xx_atux_ops,
540 sys, &sys->resources);
Dan Williams285f5fa2006-12-07 02:59:39 +0100541 break;
542 case IOP13XX_INIT_ATU_ATUE:
Bjorn Helgaas37d15902011-10-28 16:26:16 -0600543 bus = pci_bus_atue = pci_scan_root_bus(NULL, sys->busnr,
544 &iop13xx_atue_ops,
545 sys, &sys->resources);
Dan Williams285f5fa2006-12-07 02:59:39 +0100546 break;
547 }
548
549 return bus;
550}
551
552/* This function is called from iop13xx_pci_init() after assigning valid
553 * values to iop13xx_atue_pmmr_offset. This is the location for common
554 * setup of ATUE for all IOP13XX implementations.
555 */
556void __init iop13xx_atue_setup(void)
557{
558 int func = iop13xx_atu_function(IOP13XX_INIT_ATU_ATUE);
559 u32 reg_val;
560
Daniel Wolstenholme2fd02372007-05-10 22:33:02 -0700561#ifdef CONFIG_PCI_MSI
562 /* BAR 0 (inbound msi window) */
563 __raw_writel(IOP13XX_MU_BASE_PHYS, IOP13XX_MU_MUBAR);
564 __raw_writel(~(IOP13XX_MU_WINDOW_SIZE - 1), IOP13XX_ATUE_IALR0);
565 __raw_writel(IOP13XX_MU_BASE_PHYS, IOP13XX_ATUE_IATVR0);
566 __raw_writel(IOP13XX_MU_BASE_PCI, IOP13XX_ATUE_IABAR0);
567#endif
568
Dan Williams285f5fa2006-12-07 02:59:39 +0100569 /* BAR 1 (1:1 mapping with Physical RAM) */
570 /* Set limit and enable */
571 __raw_writel(~(IOP13XX_MAX_RAM_SIZE - PHYS_OFFSET - 1) & ~0x1,
572 IOP13XX_ATUE_IALR1);
573 __raw_writel(0x0, IOP13XX_ATUE_IAUBAR1);
574
575 /* Set base at the top of the reserved address space */
576 __raw_writel(PHYS_OFFSET | PCI_BASE_ADDRESS_MEM_TYPE_64 |
577 PCI_BASE_ADDRESS_MEM_PREFETCH, IOP13XX_ATUE_IABAR1);
578
579 /* 1:1 mapping with physical ram
580 * (leave big endian byte swap disabled)
581 */
582 __raw_writel(0x0, IOP13XX_ATUE_IAUTVR1);
583 __raw_writel(PHYS_OFFSET, IOP13XX_ATUE_IATVR1);
584
585 /* Outbound window 1 (PCIX/PCIE memory window) */
586 /* 32 bit Address Space */
587 __raw_writel(0x0, IOP13XX_ATUE_OUMWTVR1);
588 /* PA[35:32] */
589 __raw_writel(IOP13XX_ATUE_OUMBAR_ENABLE |
590 (IOP13XX_PCIE_MEM_PHYS_OFFSET >> 32),
591 IOP13XX_ATUE_OUMBAR1);
592
593 /* Setup the I/O Bar
594 * A[35-16] in 31-12
595 */
596 __raw_writel(((IOP13XX_PCIE_LOWER_IO_PA >> 0x4) & 0xfffff000),
597 IOP13XX_ATUE_OIOBAR);
598 __raw_writel(IOP13XX_PCIE_LOWER_IO_BA, IOP13XX_ATUE_OIOWTVR);
599
600 /* clear startup errors */
601 iop13xx_atue_pci_status(1);
602
603 /* OIOBAR function number
604 */
605 reg_val = __raw_readl(IOP13XX_ATUE_OIOBAR);
606 reg_val &= ~0x7;
607 reg_val |= func;
608 __raw_writel(reg_val, IOP13XX_ATUE_OIOBAR);
609
610 /* OUMBAR function numbers
611 */
612 reg_val = __raw_readl(IOP13XX_ATUE_OUMBAR0);
613 reg_val &= ~(IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK <<
614 IOP13XX_ATU_OUMBAR_FUNC_NUM);
615 reg_val |= func << IOP13XX_ATU_OUMBAR_FUNC_NUM;
616 __raw_writel(reg_val, IOP13XX_ATUE_OUMBAR0);
617
618 reg_val = __raw_readl(IOP13XX_ATUE_OUMBAR1);
619 reg_val &= ~(IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK <<
620 IOP13XX_ATU_OUMBAR_FUNC_NUM);
621 reg_val |= func << IOP13XX_ATU_OUMBAR_FUNC_NUM;
622 __raw_writel(reg_val, IOP13XX_ATUE_OUMBAR1);
623
624 reg_val = __raw_readl(IOP13XX_ATUE_OUMBAR2);
625 reg_val &= ~(IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK <<
626 IOP13XX_ATU_OUMBAR_FUNC_NUM);
627 reg_val |= func << IOP13XX_ATU_OUMBAR_FUNC_NUM;
628 __raw_writel(reg_val, IOP13XX_ATUE_OUMBAR2);
629
630 reg_val = __raw_readl(IOP13XX_ATUE_OUMBAR3);
631 reg_val &= ~(IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK <<
632 IOP13XX_ATU_OUMBAR_FUNC_NUM);
633 reg_val |= func << IOP13XX_ATU_OUMBAR_FUNC_NUM;
634 __raw_writel(reg_val, IOP13XX_ATUE_OUMBAR3);
635
636 /* Enable inbound and outbound cycles
637 */
638 reg_val = __raw_readw(IOP13XX_ATUE_ATUCMD);
639 reg_val |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
640 PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
641 __raw_writew(reg_val, IOP13XX_ATUE_ATUCMD);
642
643 reg_val = __raw_readl(IOP13XX_ATUE_ATUCR);
644 reg_val |= IOP13XX_ATUE_ATUCR_OUT_EN |
645 IOP13XX_ATUE_ATUCR_IVM;
646 __raw_writel(reg_val, IOP13XX_ATUE_ATUCR);
647}
648
649void __init iop13xx_atue_disable(void)
650{
651 u32 reg_val;
652
653 __raw_writew(0x0, IOP13XX_ATUE_ATUCMD);
654 __raw_writel(IOP13XX_ATUE_ATUCR_IVM, IOP13XX_ATUE_ATUCR);
655
656 /* wait for cycles to quiesce */
657 while (__raw_readl(IOP13XX_ATUE_PCSR) & (IOP13XX_ATUE_PCSR_OUT_Q_BUSY |
658 IOP13XX_ATUE_PCSR_IN_Q_BUSY |
659 IOP13XX_ATUE_PCSR_LLRB_BUSY))
660 cpu_relax();
661
662 /* BAR 0 ( Disabled ) */
663 __raw_writel(0x0, IOP13XX_ATUE_IAUBAR0);
664 __raw_writel(0x0, IOP13XX_ATUE_IABAR0);
665 __raw_writel(0x0, IOP13XX_ATUE_IAUTVR0);
666 __raw_writel(0x0, IOP13XX_ATUE_IATVR0);
667 __raw_writel(0x0, IOP13XX_ATUE_IALR0);
668 reg_val = __raw_readl(IOP13XX_ATUE_OUMBAR0);
669 reg_val &= ~IOP13XX_ATUE_OUMBAR_ENABLE;
670 __raw_writel(reg_val, IOP13XX_ATUE_OUMBAR0);
671
672 /* BAR 1 ( Disabled ) */
673 __raw_writel(0x0, IOP13XX_ATUE_IAUBAR1);
674 __raw_writel(0x0, IOP13XX_ATUE_IABAR1);
675 __raw_writel(0x0, IOP13XX_ATUE_IAUTVR1);
676 __raw_writel(0x0, IOP13XX_ATUE_IATVR1);
677 __raw_writel(0x0, IOP13XX_ATUE_IALR1);
678 reg_val = __raw_readl(IOP13XX_ATUE_OUMBAR1);
679 reg_val &= ~IOP13XX_ATUE_OUMBAR_ENABLE;
680 __raw_writel(reg_val, IOP13XX_ATUE_OUMBAR1);
681
682 /* BAR 2 ( Disabled ) */
683 __raw_writel(0x0, IOP13XX_ATUE_IAUBAR2);
684 __raw_writel(0x0, IOP13XX_ATUE_IABAR2);
685 __raw_writel(0x0, IOP13XX_ATUE_IAUTVR2);
686 __raw_writel(0x0, IOP13XX_ATUE_IATVR2);
687 __raw_writel(0x0, IOP13XX_ATUE_IALR2);
688 reg_val = __raw_readl(IOP13XX_ATUE_OUMBAR2);
689 reg_val &= ~IOP13XX_ATUE_OUMBAR_ENABLE;
690 __raw_writel(reg_val, IOP13XX_ATUE_OUMBAR2);
691
692 /* BAR 3 ( Disabled ) */
693 reg_val = __raw_readl(IOP13XX_ATUE_OUMBAR3);
694 reg_val &= ~IOP13XX_ATUE_OUMBAR_ENABLE;
695 __raw_writel(reg_val, IOP13XX_ATUE_OUMBAR3);
696
697 /* Setup the I/O Bar
698 * A[35-16] in 31-12
699 */
700 __raw_writel((IOP13XX_PCIE_LOWER_IO_PA >> 0x4) & 0xfffff000,
701 IOP13XX_ATUE_OIOBAR);
702 __raw_writel(IOP13XX_PCIE_LOWER_IO_BA, IOP13XX_ATUE_OIOWTVR);
703}
704
705/* This function is called from iop13xx_pci_init() after assigning valid
706 * values to iop13xx_atux_pmmr_offset. This is the location for common
707 * setup of ATUX for all IOP13XX implementations.
708 */
709void __init iop13xx_atux_setup(void)
710{
711 u32 reg_val;
712 int func = iop13xx_atu_function(IOP13XX_INIT_ATU_ATUX);
713
714 /* Take PCI-X bus out of reset if bootloader hasn't already.
715 * According to spec, we should wait for 2^25 PCI clocks to meet
716 * the PCI timing parameter Trhfa (RST# high to first access).
717 * This is rarely necessary and often ignored.
718 */
719 reg_val = __raw_readl(IOP13XX_ATUX_PCSR);
720 if (reg_val & IOP13XX_ATUX_PCSR_P_RSTOUT) {
721 int msec = (reg_val >> IOP13XX_ATUX_PCSR_FREQ_OFFSET) & 0x7;
722 msec = 1000 / (8-msec); /* bits 100=133MHz, 111=>33MHz */
723 __raw_writel(reg_val & ~IOP13XX_ATUX_PCSR_P_RSTOUT,
724 IOP13XX_ATUX_PCSR);
725 atux_trhfa_timeout = jiffies + msecs_to_jiffies(msec);
726 }
727 else
728 atux_trhfa_timeout = jiffies;
729
Daniel Wolstenholme2fd02372007-05-10 22:33:02 -0700730#ifdef CONFIG_PCI_MSI
731 /* BAR 0 (inbound msi window) */
732 __raw_writel(IOP13XX_MU_BASE_PHYS, IOP13XX_MU_MUBAR);
733 __raw_writel(~(IOP13XX_MU_WINDOW_SIZE - 1), IOP13XX_ATUX_IALR0);
734 __raw_writel(IOP13XX_MU_BASE_PHYS, IOP13XX_ATUX_IATVR0);
735 __raw_writel(IOP13XX_MU_BASE_PCI, IOP13XX_ATUX_IABAR0);
736#endif
737
Dan Williams285f5fa2006-12-07 02:59:39 +0100738 /* BAR 1 (1:1 mapping with Physical RAM) */
739 /* Set limit and enable */
740 __raw_writel(~(IOP13XX_MAX_RAM_SIZE - PHYS_OFFSET - 1) & ~0x1,
741 IOP13XX_ATUX_IALR1);
742 __raw_writel(0x0, IOP13XX_ATUX_IAUBAR1);
743
744 /* Set base at the top of the reserved address space */
745 __raw_writel(PHYS_OFFSET | PCI_BASE_ADDRESS_MEM_TYPE_64 |
746 PCI_BASE_ADDRESS_MEM_PREFETCH, IOP13XX_ATUX_IABAR1);
747
748 /* 1:1 mapping with physical ram
749 * (leave big endian byte swap disabled)
750 */
751 __raw_writel(0x0, IOP13XX_ATUX_IAUTVR1);
752 __raw_writel(PHYS_OFFSET, IOP13XX_ATUX_IATVR1);
753
754 /* Outbound window 1 (PCIX/PCIE memory window) */
755 /* 32 bit Address Space */
756 __raw_writel(0x0, IOP13XX_ATUX_OUMWTVR1);
757 /* PA[35:32] */
758 __raw_writel(IOP13XX_ATUX_OUMBAR_ENABLE |
759 IOP13XX_PCIX_MEM_PHYS_OFFSET >> 32,
760 IOP13XX_ATUX_OUMBAR1);
761
762 /* Setup the I/O Bar
763 * A[35-16] in 31-12
764 */
765 __raw_writel((IOP13XX_PCIX_LOWER_IO_PA >> 0x4) & 0xfffff000,
766 IOP13XX_ATUX_OIOBAR);
767 __raw_writel(IOP13XX_PCIX_LOWER_IO_BA, IOP13XX_ATUX_OIOWTVR);
768
769 /* clear startup errors */
770 iop13xx_atux_pci_status(1);
771
772 /* OIOBAR function number
773 */
774 reg_val = __raw_readl(IOP13XX_ATUX_OIOBAR);
775 reg_val &= ~0x7;
776 reg_val |= func;
777 __raw_writel(reg_val, IOP13XX_ATUX_OIOBAR);
778
779 /* OUMBAR function numbers
780 */
781 reg_val = __raw_readl(IOP13XX_ATUX_OUMBAR0);
782 reg_val &= ~(IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK <<
783 IOP13XX_ATU_OUMBAR_FUNC_NUM);
784 reg_val |= func << IOP13XX_ATU_OUMBAR_FUNC_NUM;
785 __raw_writel(reg_val, IOP13XX_ATUX_OUMBAR0);
786
787 reg_val = __raw_readl(IOP13XX_ATUX_OUMBAR1);
788 reg_val &= ~(IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK <<
789 IOP13XX_ATU_OUMBAR_FUNC_NUM);
790 reg_val |= func << IOP13XX_ATU_OUMBAR_FUNC_NUM;
791 __raw_writel(reg_val, IOP13XX_ATUX_OUMBAR1);
792
793 reg_val = __raw_readl(IOP13XX_ATUX_OUMBAR2);
794 reg_val &= ~(IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK <<
795 IOP13XX_ATU_OUMBAR_FUNC_NUM);
796 reg_val |= func << IOP13XX_ATU_OUMBAR_FUNC_NUM;
797 __raw_writel(reg_val, IOP13XX_ATUX_OUMBAR2);
798
799 reg_val = __raw_readl(IOP13XX_ATUX_OUMBAR3);
800 reg_val &= ~(IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK <<
801 IOP13XX_ATU_OUMBAR_FUNC_NUM);
802 reg_val |= func << IOP13XX_ATU_OUMBAR_FUNC_NUM;
803 __raw_writel(reg_val, IOP13XX_ATUX_OUMBAR3);
804
805 /* Enable inbound and outbound cycles
806 */
807 reg_val = __raw_readw(IOP13XX_ATUX_ATUCMD);
808 reg_val |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
809 PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
810 __raw_writew(reg_val, IOP13XX_ATUX_ATUCMD);
811
812 reg_val = __raw_readl(IOP13XX_ATUX_ATUCR);
813 reg_val |= IOP13XX_ATUX_ATUCR_OUT_EN;
814 __raw_writel(reg_val, IOP13XX_ATUX_ATUCR);
815}
816
817void __init iop13xx_atux_disable(void)
818{
819 u32 reg_val;
820
821 __raw_writew(0x0, IOP13XX_ATUX_ATUCMD);
822 __raw_writel(0x0, IOP13XX_ATUX_ATUCR);
823
824 /* wait for cycles to quiesce */
825 while (__raw_readl(IOP13XX_ATUX_PCSR) & (IOP13XX_ATUX_PCSR_OUT_Q_BUSY |
826 IOP13XX_ATUX_PCSR_IN_Q_BUSY))
827 cpu_relax();
828
829 /* BAR 0 ( Disabled ) */
830 __raw_writel(0x0, IOP13XX_ATUX_IAUBAR0);
831 __raw_writel(0x0, IOP13XX_ATUX_IABAR0);
832 __raw_writel(0x0, IOP13XX_ATUX_IAUTVR0);
833 __raw_writel(0x0, IOP13XX_ATUX_IATVR0);
834 __raw_writel(0x0, IOP13XX_ATUX_IALR0);
835 reg_val = __raw_readl(IOP13XX_ATUX_OUMBAR0);
836 reg_val &= ~IOP13XX_ATUX_OUMBAR_ENABLE;
837 __raw_writel(reg_val, IOP13XX_ATUX_OUMBAR0);
838
839 /* BAR 1 ( Disabled ) */
840 __raw_writel(0x0, IOP13XX_ATUX_IAUBAR1);
841 __raw_writel(0x0, IOP13XX_ATUX_IABAR1);
842 __raw_writel(0x0, IOP13XX_ATUX_IAUTVR1);
843 __raw_writel(0x0, IOP13XX_ATUX_IATVR1);
844 __raw_writel(0x0, IOP13XX_ATUX_IALR1);
845 reg_val = __raw_readl(IOP13XX_ATUX_OUMBAR1);
846 reg_val &= ~IOP13XX_ATUX_OUMBAR_ENABLE;
847 __raw_writel(reg_val, IOP13XX_ATUX_OUMBAR1);
848
849 /* BAR 2 ( Disabled ) */
850 __raw_writel(0x0, IOP13XX_ATUX_IAUBAR2);
851 __raw_writel(0x0, IOP13XX_ATUX_IABAR2);
852 __raw_writel(0x0, IOP13XX_ATUX_IAUTVR2);
853 __raw_writel(0x0, IOP13XX_ATUX_IATVR2);
854 __raw_writel(0x0, IOP13XX_ATUX_IALR2);
855 reg_val = __raw_readl(IOP13XX_ATUX_OUMBAR2);
856 reg_val &= ~IOP13XX_ATUX_OUMBAR_ENABLE;
857 __raw_writel(reg_val, IOP13XX_ATUX_OUMBAR2);
858
859 /* BAR 3 ( Disabled ) */
860 __raw_writel(0x0, IOP13XX_ATUX_IAUBAR3);
861 __raw_writel(0x0, IOP13XX_ATUX_IABAR3);
862 __raw_writel(0x0, IOP13XX_ATUX_IAUTVR3);
863 __raw_writel(0x0, IOP13XX_ATUX_IATVR3);
864 __raw_writel(0x0, IOP13XX_ATUX_IALR3);
865 reg_val = __raw_readl(IOP13XX_ATUX_OUMBAR3);
866 reg_val &= ~IOP13XX_ATUX_OUMBAR_ENABLE;
867 __raw_writel(reg_val, IOP13XX_ATUX_OUMBAR3);
868
869 /* Setup the I/O Bar
870 * A[35-16] in 31-12
871 */
872 __raw_writel((IOP13XX_PCIX_LOWER_IO_PA >> 0x4) & 0xfffff000,
873 IOP13XX_ATUX_OIOBAR);
874 __raw_writel(IOP13XX_PCIX_LOWER_IO_BA, IOP13XX_ATUX_OIOWTVR);
875}
876
877void __init iop13xx_set_atu_mmr_bases(void)
878{
879 /* Based on ESSR0, determine the ATU X/E offsets */
880 switch(__raw_readl(IOP13XX_ESSR0) &
881 (IOP13XX_CONTROLLER_ONLY | IOP13XX_INTERFACE_SEL_PCIX)) {
882 /* both asserted */
883 case 0:
884 iop13xx_atux_pmmr_offset = IOP13XX_ATU1_PMMR_OFFSET;
885 iop13xx_atue_pmmr_offset = IOP13XX_ATU2_PMMR_OFFSET;
886 break;
887 /* IOP13XX_CONTROLLER_ONLY = deasserted
888 * IOP13XX_INTERFACE_SEL_PCIX = asserted
889 */
890 case IOP13XX_CONTROLLER_ONLY:
891 iop13xx_atux_pmmr_offset = IOP13XX_ATU0_PMMR_OFFSET;
892 iop13xx_atue_pmmr_offset = IOP13XX_ATU2_PMMR_OFFSET;
893 break;
894 /* IOP13XX_CONTROLLER_ONLY = asserted
895 * IOP13XX_INTERFACE_SEL_PCIX = deasserted
896 */
897 case IOP13XX_INTERFACE_SEL_PCIX:
898 iop13xx_atux_pmmr_offset = IOP13XX_ATU1_PMMR_OFFSET;
899 iop13xx_atue_pmmr_offset = IOP13XX_ATU2_PMMR_OFFSET;
900 break;
901 /* both deasserted */
902 case IOP13XX_CONTROLLER_ONLY | IOP13XX_INTERFACE_SEL_PCIX:
903 iop13xx_atux_pmmr_offset = IOP13XX_ATU2_PMMR_OFFSET;
904 iop13xx_atue_pmmr_offset = IOP13XX_ATU0_PMMR_OFFSET;
905 break;
906 default:
907 BUG();
908 }
909}
910
911void __init iop13xx_atu_select(struct hw_pci *plat_pci)
912{
913 int i;
914
915 /* set system defaults
916 * note: if "iop13xx_init_atu=" is specified this autodetect
917 * sequence will be bypassed
918 */
919 if (init_atu == IOP13XX_INIT_ATU_DEFAULT) {
920 /* check for single/dual interface */
921 if (__raw_readl(IOP13XX_ESSR0) & IOP13XX_INTERFACE_SEL_PCIX) {
922 /* ATUE must be present check the device id
923 * to see if ATUX is present.
924 */
925 init_atu |= IOP13XX_INIT_ATU_ATUE;
926 switch (__raw_readw(IOP13XX_ATUE_DID) & 0xf0) {
927 case 0x70:
928 case 0x80:
929 case 0xc0:
930 init_atu |= IOP13XX_INIT_ATU_ATUX;
931 break;
932 }
933 } else {
934 /* ATUX must be present check the device id
935 * to see if ATUE is present.
936 */
937 init_atu |= IOP13XX_INIT_ATU_ATUX;
938 switch (__raw_readw(IOP13XX_ATUX_DID) & 0xf0) {
939 case 0x70:
940 case 0x80:
941 case 0xc0:
942 init_atu |= IOP13XX_INIT_ATU_ATUE;
943 break;
944 }
945 }
946
947 /* check central resource and root complex capability */
948 if (init_atu & IOP13XX_INIT_ATU_ATUX)
949 if (!(__raw_readl(IOP13XX_ATUX_PCSR) &
950 IOP13XX_ATUX_PCSR_CENTRAL_RES))
951 init_atu &= ~IOP13XX_INIT_ATU_ATUX;
952
953 if (init_atu & IOP13XX_INIT_ATU_ATUE)
954 if (__raw_readl(IOP13XX_ATUE_PCSR) &
955 IOP13XX_ATUE_PCSR_END_POINT)
956 init_atu &= ~IOP13XX_INIT_ATU_ATUE;
957 }
958
959 for (i = 0; i < 2; i++) {
960 if((init_atu & (1 << i)) == (1 << i))
961 plat_pci->nr_controllers++;
962 }
963}
964
965void __init iop13xx_pci_init(void)
966{
967 /* clear pre-existing south bridge errors */
968 __raw_writel(__raw_readl(IOP13XX_XBG_BECSR) & 3, IOP13XX_XBG_BECSR);
969
970 /* Setup the Min Address for PCI memory... */
Rob Herringc9d95fb2011-06-28 21:16:13 -0500971 pcibios_min_mem = IOP13XX_PCIX_LOWER_MEM_BA;
Dan Williams285f5fa2006-12-07 02:59:39 +0100972
973 /* if Linux is given control of an ATU
974 * clear out its prior configuration,
975 * otherwise do not touch the registers
976 */
977 if (init_atu & IOP13XX_INIT_ATU_ATUE) {
978 iop13xx_atue_disable();
979 iop13xx_atue_setup();
980 }
981
982 if (init_atu & IOP13XX_INIT_ATU_ATUX) {
983 iop13xx_atux_disable();
984 iop13xx_atux_setup();
985 }
986
Kirill A. Shutemov6338a6a2010-07-22 13:18:19 +0100987 hook_fault_code(16+6, iop13xx_pci_abort, SIGBUS, 0,
Dan Williams285f5fa2006-12-07 02:59:39 +0100988 "imprecise external abort");
989}
990
Simon Arlott6cbdc8c2007-05-11 20:40:30 +0100991/* initialize the pci memory space. handle any combination of
Dan Williams285f5fa2006-12-07 02:59:39 +0100992 * atue and atux enabled/disabled
993 */
994int iop13xx_pci_setup(int nr, struct pci_sys_data *sys)
995{
996 struct resource *res;
997 int which_atu;
998 u32 pcixsr, pcsr;
999
1000 if (nr > 1)
1001 return 0;
1002
Rob Herringe7adf1e2012-07-13 19:37:01 -05001003 res = kzalloc(sizeof(struct resource), GFP_KERNEL);
Dan Williams285f5fa2006-12-07 02:59:39 +01001004 if (!res)
1005 panic("PCI: unable to alloc resources");
1006
Dan Williams285f5fa2006-12-07 02:59:39 +01001007
1008 /* 'nr' assumptions:
1009 * ATUX is always 0
1010 * ATUE is 1 when ATUX is also enabled
1011 * ATUE is 0 when ATUX is disabled
1012 */
1013 switch(init_atu) {
1014 case IOP13XX_INIT_ATU_ATUX:
1015 which_atu = nr ? 0 : IOP13XX_INIT_ATU_ATUX;
1016 break;
1017 case IOP13XX_INIT_ATU_ATUE:
1018 which_atu = nr ? 0 : IOP13XX_INIT_ATU_ATUE;
1019 break;
1020 case (IOP13XX_INIT_ATU_ATUX | IOP13XX_INIT_ATU_ATUE):
1021 which_atu = nr ? IOP13XX_INIT_ATU_ATUE : IOP13XX_INIT_ATU_ATUX;
1022 break;
1023 default:
1024 which_atu = 0;
1025 }
1026
Alan Coxb23c7a42009-03-23 10:44:07 +00001027 if (!which_atu) {
1028 kfree(res);
Dan Williams285f5fa2006-12-07 02:59:39 +01001029 return 0;
Alan Coxb23c7a42009-03-23 10:44:07 +00001030 }
Dan Williams285f5fa2006-12-07 02:59:39 +01001031
1032 switch(which_atu) {
1033 case IOP13XX_INIT_ATU_ATUX:
1034 pcixsr = __raw_readl(IOP13XX_ATUX_PCIXSR);
1035 pcixsr &= ~0xffff;
1036 pcixsr |= sys->busnr << IOP13XX_ATUX_PCIXSR_BUS_NUM |
1037 0 << IOP13XX_ATUX_PCIXSR_DEV_NUM |
1038 iop13xx_atu_function(IOP13XX_INIT_ATU_ATUX)
1039 << IOP13XX_ATUX_PCIXSR_FUNC_NUM;
1040 __raw_writel(pcixsr, IOP13XX_ATUX_PCIXSR);
1041
Rob Herringe7adf1e2012-07-13 19:37:01 -05001042 pci_ioremap_io(0, IOP13XX_PCIX_LOWER_IO_PA);
Dan Williams285f5fa2006-12-07 02:59:39 +01001043
Rob Herringe7adf1e2012-07-13 19:37:01 -05001044 res->start = IOP13XX_PCIX_LOWER_MEM_RA;
1045 res->end = IOP13XX_PCIX_UPPER_MEM_RA;
1046 res->name = "IQ81340 ATUX PCI Memory Space";
1047 res->flags = IORESOURCE_MEM;
Dan Williams285f5fa2006-12-07 02:59:39 +01001048 sys->mem_offset = IOP13XX_PCIX_MEM_OFFSET;
Dan Williams285f5fa2006-12-07 02:59:39 +01001049 break;
1050 case IOP13XX_INIT_ATU_ATUE:
1051 /* Note: the function number field in the PCSR is ro */
1052 pcsr = __raw_readl(IOP13XX_ATUE_PCSR);
1053 pcsr &= ~(0xfff8 << 16);
1054 pcsr |= sys->busnr << IOP13XX_ATUE_PCSR_BUS_NUM |
1055 0 << IOP13XX_ATUE_PCSR_DEV_NUM;
1056
1057 __raw_writel(pcsr, IOP13XX_ATUE_PCSR);
1058
Rob Herringe7adf1e2012-07-13 19:37:01 -05001059 pci_ioremap_io(SZ_64K, IOP13XX_PCIE_LOWER_IO_PA);
Dan Williams285f5fa2006-12-07 02:59:39 +01001060
Rob Herringe7adf1e2012-07-13 19:37:01 -05001061 res->start = IOP13XX_PCIE_LOWER_MEM_RA;
1062 res->end = IOP13XX_PCIE_UPPER_MEM_RA;
1063 res->name = "IQ81340 ATUE PCI Memory Space";
1064 res->flags = IORESOURCE_MEM;
Dan Williams285f5fa2006-12-07 02:59:39 +01001065 sys->mem_offset = IOP13XX_PCIE_MEM_OFFSET;
Dan Williams285f5fa2006-12-07 02:59:39 +01001066 sys->map_irq = iop13xx_pcie_map_irq;
1067 break;
1068 default:
Alan Coxb23c7a42009-03-23 10:44:07 +00001069 kfree(res);
Dan Williams285f5fa2006-12-07 02:59:39 +01001070 return 0;
1071 }
1072
Rob Herringe7adf1e2012-07-13 19:37:01 -05001073 request_resource(&iomem_resource, res);
Dan Williams285f5fa2006-12-07 02:59:39 +01001074
Rob Herringe7adf1e2012-07-13 19:37:01 -05001075 pci_add_resource_offset(&sys->resources, res, sys->mem_offset);
Dan Williams285f5fa2006-12-07 02:59:39 +01001076
1077 return 1;
1078}
1079
1080u16 iop13xx_dev_id(void)
1081{
1082 if (__raw_readl(IOP13XX_ESSR0) & IOP13XX_INTERFACE_SEL_PCIX)
1083 return __raw_readw(IOP13XX_ATUE_DID);
1084 else
1085 return __raw_readw(IOP13XX_ATUX_DID);
1086}
1087
1088static int __init iop13xx_init_atu_setup(char *str)
1089{
1090 init_atu = IOP13XX_INIT_ATU_NONE;
1091 if (str) {
1092 while (*str != '\0') {
1093 switch (*str) {
1094 case 'x':
1095 case 'X':
1096 init_atu |= IOP13XX_INIT_ATU_ATUX;
1097 init_atu &= ~IOP13XX_INIT_ATU_NONE;
1098 break;
1099 case 'e':
1100 case 'E':
1101 init_atu |= IOP13XX_INIT_ATU_ATUE;
1102 init_atu &= ~IOP13XX_INIT_ATU_NONE;
1103 break;
1104 case ',':
1105 case '=':
1106 break;
1107 default:
1108 PRINTK("\"iop13xx_init_atu\" malformed at "
1109 "character: \'%c\'", *str);
1110 *(str + 1) = '\0';
1111 init_atu = IOP13XX_INIT_ATU_DEFAULT;
1112 }
1113 str++;
1114 }
1115 }
1116 return 1;
1117}
1118
1119__setup("iop13xx_init_atu", iop13xx_init_atu_setup);