drivers/target/iscsi/iscsi_target_erl0.c

/******************************************************************************
 * This file contains error recovery level zero functions used by
 * the iSCSI Target driver.
 *
 * (c) Copyright 2007-2013 Datera, Inc.
 *
 * Author: Nicholas A. Bellinger <nab@linux-iscsi.org>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 ******************************************************************************/

#include <scsi/iscsi_proto.h>
#include <target/target_core_base.h>
#include <target/target_core_fabric.h>

#include <target/iscsi/iscsi_target_core.h>
#include "iscsi_target_seq_pdu_list.h"
#include "iscsi_target_erl0.h"
#include "iscsi_target_erl1.h"
#include "iscsi_target_erl2.h"
#include "iscsi_target_util.h"
#include "iscsi_target.h"

/*
 *	Used to set values in struct iscsi_cmd that iscsit_dataout_check_sequence()
 *	checks against to determine a PDU's Offset+Length is within the current
 *	DataOUT Sequence.  Used for DataSequenceInOrder=Yes only.
 */
void iscsit_set_dataout_sequence_values(
	struct iscsi_cmd *cmd)
{
	struct iscsi_conn *conn = cmd->conn;
	/*
	 * Still set seq_start_offset and seq_end_offset for Unsolicited
	 * DataOUT, even if DataSequenceInOrder=No.
	 */
	if (cmd->unsolicited_data) {
		cmd->seq_start_offset = cmd->write_data_done;
		cmd->seq_end_offset = (cmd->write_data_done +
			((cmd->se_cmd.data_length >
			  conn->sess->sess_ops->FirstBurstLength) ?
			 conn->sess->sess_ops->FirstBurstLength : cmd->se_cmd.data_length));
		return;
	}

	if (!conn->sess->sess_ops->DataSequenceInOrder)
		return;

	if (!cmd->seq_start_offset && !cmd->seq_end_offset) {
		cmd->seq_start_offset = cmd->write_data_done;
		cmd->seq_end_offset = (cmd->se_cmd.data_length >
			conn->sess->sess_ops->MaxBurstLength) ?
			(cmd->write_data_done +
			conn->sess->sess_ops->MaxBurstLength) : cmd->se_cmd.data_length;
	} else {
		cmd->seq_start_offset = cmd->seq_end_offset;
		cmd->seq_end_offset = ((cmd->seq_end_offset +
			conn->sess->sess_ops->MaxBurstLength) >=
			cmd->se_cmd.data_length) ? cmd->se_cmd.data_length :
			(cmd->seq_end_offset +
			 conn->sess->sess_ops->MaxBurstLength);
	}
}

static int iscsit_dataout_within_command_recovery_check(
	struct iscsi_cmd *cmd,
	unsigned char *buf)
{
	struct iscsi_conn *conn = cmd->conn;
	struct iscsi_data *hdr = (struct iscsi_data *) buf;
	u32 payload_length = ntoh24(hdr->dlength);

	/*
	 * We do the within-command recovery checks here as it is
	 * the first function called in iscsi_check_pre_dataout().
	 * Basically, if we are in within-command recovery and
	 * the PDU does not contain the offset the sequence needs,
	 * dump the payload.
	 *
	 * This only applies to DataPDUInOrder=Yes, for
	 * DataPDUInOrder=No we only re-request the failed PDU
	 * and check that all PDUs in a sequence are received
	 * upon end of sequence.
	 */
	if (conn->sess->sess_ops->DataSequenceInOrder) {
		if ((cmd->cmd_flags & ICF_WITHIN_COMMAND_RECOVERY) &&
		    cmd->write_data_done != be32_to_cpu(hdr->offset))
			goto dump;

		cmd->cmd_flags &= ~ICF_WITHIN_COMMAND_RECOVERY;
	} else {
		struct iscsi_seq *seq;

		seq = iscsit_get_seq_holder(cmd, be32_to_cpu(hdr->offset),
					    payload_length);
		if (!seq)
			return DATAOUT_CANNOT_RECOVER;
		/*
		 * Set the struct iscsi_seq pointer to reuse later.
		 */
		cmd->seq_ptr = seq;

		if (conn->sess->sess_ops->DataPDUInOrder) {
			if (seq->status ==
			    DATAOUT_SEQUENCE_WITHIN_COMMAND_RECOVERY &&
			   (seq->offset != be32_to_cpu(hdr->offset) ||
			    seq->data_sn != be32_to_cpu(hdr->datasn)))
				goto dump;
		} else {
			if (seq->status ==
			     DATAOUT_SEQUENCE_WITHIN_COMMAND_RECOVERY &&
			    seq->data_sn != be32_to_cpu(hdr->datasn))
				goto dump;
		}

		if (seq->status == DATAOUT_SEQUENCE_COMPLETE)
			goto dump;

		if (seq->status != DATAOUT_SEQUENCE_COMPLETE)
			seq->status = 0;
	}

	return DATAOUT_NORMAL;

dump:
	pr_err("Dumping DataOUT PDU Offset: %u Length: %d DataSN:"
		" 0x%08x\n", hdr->offset, payload_length, hdr->datasn);
	return iscsit_dump_data_payload(conn, payload_length, 1);
}

static int iscsit_dataout_check_unsolicited_sequence(
	struct iscsi_cmd *cmd,
	unsigned char *buf)
{
	u32 first_burst_len;
	struct iscsi_conn *conn = cmd->conn;
	struct iscsi_data *hdr = (struct iscsi_data *) buf;
	u32 payload_length = ntoh24(hdr->dlength);


	if ((be32_to_cpu(hdr->offset) < cmd->seq_start_offset) ||
	   ((be32_to_cpu(hdr->offset) + payload_length) > cmd->seq_end_offset)) {
		pr_err("Command ITT: 0x%08x with Offset: %u,"
		" Length: %u outside of Unsolicited Sequence %u:%u while"
		" DataSequenceInOrder=Yes.\n", cmd->init_task_tag,
		be32_to_cpu(hdr->offset), payload_length, cmd->seq_start_offset,
			cmd->seq_end_offset);
		return DATAOUT_CANNOT_RECOVER;
	}

	first_burst_len = (cmd->first_burst_len + payload_length);

	if (first_burst_len > conn->sess->sess_ops->FirstBurstLength) {
		pr_err("Total %u bytes exceeds FirstBurstLength: %u"
			" for this Unsolicited DataOut Burst.\n",
			first_burst_len, conn->sess->sess_ops->FirstBurstLength);
		transport_send_check_condition_and_sense(&cmd->se_cmd,
				TCM_INCORRECT_AMOUNT_OF_DATA, 0);
		return DATAOUT_CANNOT_RECOVER;
	}

	/*
	 * Perform various MaxBurstLength and ISCSI_FLAG_CMD_FINAL sanity
	 * checks for the current Unsolicited DataOUT Sequence.
	 */
	if (hdr->flags & ISCSI_FLAG_CMD_FINAL) {
		/*
		 * Ignore ISCSI_FLAG_CMD_FINAL checks while DataPDUInOrder=No, end of
		 * sequence checks are handled in
		 * iscsit_dataout_datapduinorder_no_fbit().
		 */
		if (!conn->sess->sess_ops->DataPDUInOrder)
			goto out;

		if ((first_burst_len != cmd->se_cmd.data_length) &&
		    (first_burst_len != conn->sess->sess_ops->FirstBurstLength)) {
			pr_err("Unsolicited non-immediate data"
			" received %u does not equal FirstBurstLength: %u, and"
			" does not equal ExpXferLen %u.\n", first_burst_len,
				conn->sess->sess_ops->FirstBurstLength,
				cmd->se_cmd.data_length);
			transport_send_check_condition_and_sense(&cmd->se_cmd,
					TCM_INCORRECT_AMOUNT_OF_DATA, 0);
			return DATAOUT_CANNOT_RECOVER;
		}
	} else {
		if (first_burst_len == conn->sess->sess_ops->FirstBurstLength) {
			pr_err("Command ITT: 0x%08x reached"
			" FirstBurstLength: %u, but ISCSI_FLAG_CMD_FINAL is not set. protocol"
				" error.\n", cmd->init_task_tag,
				conn->sess->sess_ops->FirstBurstLength);
			return DATAOUT_CANNOT_RECOVER;
		}
		if (first_burst_len == cmd->se_cmd.data_length) {
			pr_err("Command ITT: 0x%08x reached"
			" ExpXferLen: %u, but ISCSI_FLAG_CMD_FINAL is not set. protocol"
			" error.\n", cmd->init_task_tag, cmd->se_cmd.data_length);
			return DATAOUT_CANNOT_RECOVER;
		}
	}

out:
	return DATAOUT_NORMAL;
}

static int iscsit_dataout_check_sequence(
	struct iscsi_cmd *cmd,
	unsigned char *buf)
{
	u32 next_burst_len;
	struct iscsi_conn *conn = cmd->conn;
	struct iscsi_seq *seq = NULL;
	struct iscsi_data *hdr = (struct iscsi_data *) buf;
	u32 payload_length = ntoh24(hdr->dlength);

	/*
	 * For DataSequenceInOrder=Yes: Check that the offset and offset+length
	 * is within range as defined by iscsi_set_dataout_sequence_values().
	 *
	 * For DataSequenceInOrder=No: Check that an struct iscsi_seq exists for
	 * offset+length tuple.
	 */
	if (conn->sess->sess_ops->DataSequenceInOrder) {
		/*
		 * Due to possibility of recovery DataOUT sent by the initiator
		 * fullfilling an Recovery R2T, it's best to just dump the
		 * payload here, instead of erroring out.
		 */
		if ((be32_to_cpu(hdr->offset) < cmd->seq_start_offset) ||
		   ((be32_to_cpu(hdr->offset) + payload_length) > cmd->seq_end_offset)) {
			pr_err("Command ITT: 0x%08x with Offset: %u,"
			" Length: %u outside of Sequence %u:%u while"
			" DataSequenceInOrder=Yes.\n", cmd->init_task_tag,
			be32_to_cpu(hdr->offset), payload_length, cmd->seq_start_offset,
				cmd->seq_end_offset);

			if (iscsit_dump_data_payload(conn, payload_length, 1) < 0)
				return DATAOUT_CANNOT_RECOVER;
			return DATAOUT_WITHIN_COMMAND_RECOVERY;
		}

		next_burst_len = (cmd->next_burst_len + payload_length);
	} else {
		seq = iscsit_get_seq_holder(cmd, be32_to_cpu(hdr->offset),
					    payload_length);
		if (!seq)
			return DATAOUT_CANNOT_RECOVER;
		/*
		 * Set the struct iscsi_seq pointer to reuse later.
		 */
		cmd->seq_ptr = seq;

		if (seq->status == DATAOUT_SEQUENCE_COMPLETE) {
			if (iscsit_dump_data_payload(conn, payload_length, 1) < 0)
				return DATAOUT_CANNOT_RECOVER;
			return DATAOUT_WITHIN_COMMAND_RECOVERY;
		}

		next_burst_len = (seq->next_burst_len + payload_length);
	}

	if (next_burst_len > conn->sess->sess_ops->MaxBurstLength) {
		pr_err("Command ITT: 0x%08x, NextBurstLength: %u and"
			" Length: %u exceeds MaxBurstLength: %u. protocol"
			" error.\n", cmd->init_task_tag,
			(next_burst_len - payload_length),
			payload_length, conn->sess->sess_ops->MaxBurstLength);
		return DATAOUT_CANNOT_RECOVER;
	}

	/*
	 * Perform various MaxBurstLength and ISCSI_FLAG_CMD_FINAL sanity
	 * checks for the current DataOUT Sequence.
	 */
	if (hdr->flags & ISCSI_FLAG_CMD_FINAL) {
		/*
		 * Ignore ISCSI_FLAG_CMD_FINAL checks while DataPDUInOrder=No, end of
		 * sequence checks are handled in
		 * iscsit_dataout_datapduinorder_no_fbit().
		 */
		if (!conn->sess->sess_ops->DataPDUInOrder)
			goto out;

		if (conn->sess->sess_ops->DataSequenceInOrder) {
			if ((next_burst_len <
			     conn->sess->sess_ops->MaxBurstLength) &&
			   ((cmd->write_data_done + payload_length) <
			     cmd->se_cmd.data_length)) {
				pr_err("Command ITT: 0x%08x set ISCSI_FLAG_CMD_FINAL"
				" before end of DataOUT sequence, protocol"
				" error.\n", cmd->init_task_tag);
				return DATAOUT_CANNOT_RECOVER;
			}
		} else {
			if (next_burst_len < seq->xfer_len) {
				pr_err("Command ITT: 0x%08x set ISCSI_FLAG_CMD_FINAL"
				" before end of DataOUT sequence, protocol"
				" error.\n", cmd->init_task_tag);
				return DATAOUT_CANNOT_RECOVER;
			}
		}
	} else {
		if (conn->sess->sess_ops->DataSequenceInOrder) {
			if (next_burst_len ==
					conn->sess->sess_ops->MaxBurstLength) {
				pr_err("Command ITT: 0x%08x reached"
				" MaxBurstLength: %u, but ISCSI_FLAG_CMD_FINAL is"
				" not set, protocol error.", cmd->init_task_tag,
					conn->sess->sess_ops->MaxBurstLength);
				return DATAOUT_CANNOT_RECOVER;
			}
			if ((cmd->write_data_done + payload_length) ==
					cmd->se_cmd.data_length) {
				pr_err("Command ITT: 0x%08x reached"
				" last DataOUT PDU in sequence but ISCSI_FLAG_"
				"CMD_FINAL is not set, protocol error.\n",
					cmd->init_task_tag);
				return DATAOUT_CANNOT_RECOVER;
			}
		} else {
			if (next_burst_len == seq->xfer_len) {
				pr_err("Command ITT: 0x%08x reached"
				" last DataOUT PDU in sequence but ISCSI_FLAG_"
				"CMD_FINAL is not set, protocol error.\n",
					cmd->init_task_tag);
				return DATAOUT_CANNOT_RECOVER;
			}
		}
	}

out:
	return DATAOUT_NORMAL;
}

static int iscsit_dataout_check_datasn(
	struct iscsi_cmd *cmd,
	unsigned char *buf)
{
	u32 data_sn = 0;
	struct iscsi_conn *conn = cmd->conn;
	struct iscsi_data *hdr = (struct iscsi_data *) buf;
	u32 payload_length = ntoh24(hdr->dlength);

	/*
	 * Considering the target has no method of re-requesting DataOUT
	 * by DataSN, if we receieve a greater DataSN than expected we
	 * assume the functions for DataPDUInOrder=[Yes,No] below will
	 * handle it.
	 *
	 * If the DataSN is less than expected, dump the payload.
	 */
	if (conn->sess->sess_ops->DataSequenceInOrder)
		data_sn = cmd->data_sn;
	else {
		struct iscsi_seq *seq = cmd->seq_ptr;
		data_sn = seq->data_sn;
	}

	if (be32_to_cpu(hdr->datasn) > data_sn) {
		pr_err("Command ITT: 0x%08x, received DataSN: 0x%08x"
			" higher than expected 0x%08x.\n", cmd->init_task_tag,
				be32_to_cpu(hdr->datasn), data_sn);
		goto recover;
	} else if (be32_to_cpu(hdr->datasn) < data_sn) {
		pr_err("Command ITT: 0x%08x, received DataSN: 0x%08x"
			" lower than expected 0x%08x, discarding payload.\n",
			cmd->init_task_tag, be32_to_cpu(hdr->datasn), data_sn);
		goto dump;
	}

	return DATAOUT_NORMAL;

recover:
	if (!conn->sess->sess_ops->ErrorRecoveryLevel) {
		pr_err("Unable to perform within-command recovery"
				" while ERL=0.\n");
		return DATAOUT_CANNOT_RECOVER;
	}
dump:
	if (iscsit_dump_data_payload(conn, payload_length, 1) < 0)
		return DATAOUT_CANNOT_RECOVER;

	return DATAOUT_WITHIN_COMMAND_RECOVERY;
}

static int iscsit_dataout_pre_datapduinorder_yes(
	struct iscsi_cmd *cmd,
	unsigned char *buf)
{
	int dump = 0, recovery = 0;
	struct iscsi_conn *conn = cmd->conn;
	struct iscsi_data *hdr = (struct iscsi_data *) buf;
	u32 payload_length = ntoh24(hdr->dlength);

	/*
	 * For DataSequenceInOrder=Yes: If the offset is greater than the global
	 * DataPDUInOrder=Yes offset counter in struct iscsi_cmd a protcol error has
	 * occurred and fail the connection.
	 *
	 * For DataSequenceInOrder=No: If the offset is greater than the per
	 * sequence DataPDUInOrder=Yes offset counter in struct iscsi_seq a protocol
	 * error has occurred and fail the connection.
	 */
	if (conn->sess->sess_ops->DataSequenceInOrder) {
		if (be32_to_cpu(hdr->offset) != cmd->write_data_done) {
			pr_err("Command ITT: 0x%08x, received offset"
			" %u different than expected %u.\n", cmd->init_task_tag,
				be32_to_cpu(hdr->offset), cmd->write_data_done);
			recovery = 1;
			goto recover;
		}
	} else {
		struct iscsi_seq *seq = cmd->seq_ptr;

		if (be32_to_cpu(hdr->offset) > seq->offset) {
			pr_err("Command ITT: 0x%08x, received offset"
			" %u greater than expected %u.\n", cmd->init_task_tag,
				be32_to_cpu(hdr->offset), seq->offset);
			recovery = 1;
			goto recover;
		} else if (be32_to_cpu(hdr->offset) < seq->offset) {
			pr_err("Command ITT: 0x%08x, received offset"
			" %u less than expected %u, discarding payload.\n",
				cmd->init_task_tag, be32_to_cpu(hdr->offset),
				seq->offset);
			dump = 1;
			goto dump;
		}
	}

	return DATAOUT_NORMAL;

recover:
	if (!conn->sess->sess_ops->ErrorRecoveryLevel) {
		pr_err("Unable to perform within-command recovery"
				" while ERL=0.\n");
		return DATAOUT_CANNOT_RECOVER;
	}
dump:
	if (iscsit_dump_data_payload(conn, payload_length, 1) < 0)
		return DATAOUT_CANNOT_RECOVER;

	return (recovery) ? iscsit_recover_dataout_sequence(cmd,
		be32_to_cpu(hdr->offset), payload_length) :
	       (dump) ? DATAOUT_WITHIN_COMMAND_RECOVERY : DATAOUT_NORMAL;
}

static int iscsit_dataout_pre_datapduinorder_no(
	struct iscsi_cmd *cmd,
	unsigned char *buf)
{
	struct iscsi_pdu *pdu;
	struct iscsi_data *hdr = (struct iscsi_data *) buf;
	u32 payload_length = ntoh24(hdr->dlength);

	pdu = iscsit_get_pdu_holder(cmd, be32_to_cpu(hdr->offset),
				    payload_length);
	if (!pdu)
		return DATAOUT_CANNOT_RECOVER;

	cmd->pdu_ptr = pdu;

	switch (pdu->status) {
	case ISCSI_PDU_NOT_RECEIVED:
	case ISCSI_PDU_CRC_FAILED:
	case ISCSI_PDU_TIMED_OUT:
		break;
	case ISCSI_PDU_RECEIVED_OK:
		pr_err("Command ITT: 0x%08x received already gotten"
			" Offset: %u, Length: %u\n", cmd->init_task_tag,
				be32_to_cpu(hdr->offset), payload_length);
		return iscsit_dump_data_payload(cmd->conn, payload_length, 1);
	default:
		return DATAOUT_CANNOT_RECOVER;
	}

	return DATAOUT_NORMAL;
}

static int iscsit_dataout_update_r2t(struct iscsi_cmd *cmd, u32 offset, u32 length)
{
	struct iscsi_r2t *r2t;

	if (cmd->unsolicited_data)
		return 0;

	r2t = iscsit_get_r2t_for_eos(cmd, offset, length);
	if (!r2t)
		return -1;

	spin_lock_bh(&cmd->r2t_lock);
	r2t->seq_complete = 1;
	cmd->outstanding_r2ts--;
	spin_unlock_bh(&cmd->r2t_lock);

	return 0;
}

static int iscsit_dataout_update_datapduinorder_no(
	struct iscsi_cmd *cmd,
	u32 data_sn,
	int f_bit)
{
	int ret = 0;
	struct iscsi_pdu *pdu = cmd->pdu_ptr;

	pdu->data_sn = data_sn;

	switch (pdu->status) {
	case ISCSI_PDU_NOT_RECEIVED:
		pdu->status = ISCSI_PDU_RECEIVED_OK;
		break;
	case ISCSI_PDU_CRC_FAILED:
		pdu->status = ISCSI_PDU_RECEIVED_OK;
		break;
	case ISCSI_PDU_TIMED_OUT:
		pdu->status = ISCSI_PDU_RECEIVED_OK;
		break;
	default:
		return DATAOUT_CANNOT_RECOVER;
	}

	if (f_bit) {
		ret = iscsit_dataout_datapduinorder_no_fbit(cmd, pdu);
		if (ret == DATAOUT_CANNOT_RECOVER)
			return ret;
	}

	return DATAOUT_NORMAL;
}

static int iscsit_dataout_post_crc_passed(
	struct iscsi_cmd *cmd,
	unsigned char *buf)
{
	int ret, send_r2t = 0;
	struct iscsi_conn *conn = cmd->conn;
	struct iscsi_seq *seq = NULL;
	struct iscsi_data *hdr = (struct iscsi_data *) buf;
	u32 payload_length = ntoh24(hdr->dlength);

	if (cmd->unsolicited_data) {
		if ((cmd->first_burst_len + payload_length) ==
		     conn->sess->sess_ops->FirstBurstLength) {
			if (iscsit_dataout_update_r2t(cmd, be32_to_cpu(hdr->offset),
					payload_length) < 0)
				return DATAOUT_CANNOT_RECOVER;
			send_r2t = 1;
		}

		if (!conn->sess->sess_ops->DataPDUInOrder) {
			ret = iscsit_dataout_update_datapduinorder_no(cmd,
				be32_to_cpu(hdr->datasn),
				(hdr->flags & ISCSI_FLAG_CMD_FINAL));
			if (ret == DATAOUT_CANNOT_RECOVER)
				return ret;
		}

		cmd->first_burst_len += payload_length;

		if (conn->sess->sess_ops->DataSequenceInOrder)
			cmd->data_sn++;
		else {
			seq = cmd->seq_ptr;
			seq->data_sn++;
			seq->offset += payload_length;
		}

		if (send_r2t) {
			if (seq)
				seq->status = DATAOUT_SEQUENCE_COMPLETE;
			cmd->first_burst_len = 0;
			cmd->unsolicited_data = 0;
		}
	} else {
		if (conn->sess->sess_ops->DataSequenceInOrder) {
			if ((cmd->next_burst_len + payload_length) ==
			     conn->sess->sess_ops->MaxBurstLength) {
				if (iscsit_dataout_update_r2t(cmd,
						be32_to_cpu(hdr->offset),
						payload_length) < 0)
					return DATAOUT_CANNOT_RECOVER;
				send_r2t = 1;
			}

			if (!conn->sess->sess_ops->DataPDUInOrder) {
				ret = iscsit_dataout_update_datapduinorder_no(
						cmd, be32_to_cpu(hdr->datasn),
						(hdr->flags & ISCSI_FLAG_CMD_FINAL));
				if (ret == DATAOUT_CANNOT_RECOVER)
					return ret;
			}

			cmd->next_burst_len += payload_length;
			cmd->data_sn++;

			if (send_r2t)
				cmd->next_burst_len = 0;
		} else {
			seq = cmd->seq_ptr;

			if ((seq->next_burst_len + payload_length) ==
			     seq->xfer_len) {
				if (iscsit_dataout_update_r2t(cmd,
						be32_to_cpu(hdr->offset),
						payload_length) < 0)
					return DATAOUT_CANNOT_RECOVER;
				send_r2t = 1;
			}

			if (!conn->sess->sess_ops->DataPDUInOrder) {
				ret = iscsit_dataout_update_datapduinorder_no(
						cmd, be32_to_cpu(hdr->datasn),
						(hdr->flags & ISCSI_FLAG_CMD_FINAL));
				if (ret == DATAOUT_CANNOT_RECOVER)
					return ret;
			}

			seq->data_sn++;
			seq->offset += payload_length;
			seq->next_burst_len += payload_length;

			if (send_r2t) {
				seq->next_burst_len = 0;
				seq->status = DATAOUT_SEQUENCE_COMPLETE;
			}
		}
	}

	if (send_r2t && conn->sess->sess_ops->DataSequenceInOrder)
		cmd->data_sn = 0;

	cmd->write_data_done += payload_length;

	if (cmd->write_data_done == cmd->se_cmd.data_length)
		return DATAOUT_SEND_TO_TRANSPORT;
	else if (send_r2t)
		return DATAOUT_SEND_R2T;
	else
		return DATAOUT_NORMAL;
}

static int iscsit_dataout_post_crc_failed(
	struct iscsi_cmd *cmd,
	unsigned char *buf)
{
	struct iscsi_conn *conn = cmd->conn;
	struct iscsi_pdu *pdu;
	struct iscsi_data *hdr = (struct iscsi_data *) buf;
	u32 payload_length = ntoh24(hdr->dlength);

	if (conn->sess->sess_ops->DataPDUInOrder)
		goto recover;
	/*
	 * The rest of this function is only called when DataPDUInOrder=No.
	 */
	pdu = cmd->pdu_ptr;

	switch (pdu->status) {
	case ISCSI_PDU_NOT_RECEIVED:
		pdu->status = ISCSI_PDU_CRC_FAILED;
		break;
	case ISCSI_PDU_CRC_FAILED:
		break;
	case ISCSI_PDU_TIMED_OUT:
		pdu->status = ISCSI_PDU_CRC_FAILED;
		break;
	default:
		return DATAOUT_CANNOT_RECOVER;
	}

recover:
	return iscsit_recover_dataout_sequence(cmd, be32_to_cpu(hdr->offset),
						payload_length);
}

/*
 *	Called from iscsit_handle_data_out() before DataOUT Payload is received
 *	and CRC computed.
 */
int iscsit_check_pre_dataout(
	struct iscsi_cmd *cmd,
	unsigned char *buf)
{
	int ret;
	struct iscsi_conn *conn = cmd->conn;

	ret = iscsit_dataout_within_command_recovery_check(cmd, buf);
	if ((ret == DATAOUT_WITHIN_COMMAND_RECOVERY) ||
	    (ret == DATAOUT_CANNOT_RECOVER))
		return ret;

	ret = iscsit_dataout_check_datasn(cmd, buf);
	if ((ret == DATAOUT_WITHIN_COMMAND_RECOVERY) ||
	    (ret == DATAOUT_CANNOT_RECOVER))
		return ret;

	if (cmd->unsolicited_data) {
		ret = iscsit_dataout_check_unsolicited_sequence(cmd, buf);
		if ((ret == DATAOUT_WITHIN_COMMAND_RECOVERY) ||
		    (ret == DATAOUT_CANNOT_RECOVER))
			return ret;
	} else {
		ret = iscsit_dataout_check_sequence(cmd, buf);
		if ((ret == DATAOUT_WITHIN_COMMAND_RECOVERY) ||
		    (ret == DATAOUT_CANNOT_RECOVER))
			return ret;
	}

	return (conn->sess->sess_ops->DataPDUInOrder) ?
		iscsit_dataout_pre_datapduinorder_yes(cmd, buf) :
		iscsit_dataout_pre_datapduinorder_no(cmd, buf);
}

/*
 *	Called from iscsit_handle_data_out() after DataOUT Payload is received
 *	and CRC computed.
 */
int iscsit_check_post_dataout(
	struct iscsi_cmd *cmd,
	unsigned char *buf,
	u8 data_crc_failed)
{
	struct iscsi_conn *conn = cmd->conn;

	cmd->dataout_timeout_retries = 0;

	if (!data_crc_failed)
		return iscsit_dataout_post_crc_passed(cmd, buf);
	else {
		if (!conn->sess->sess_ops->ErrorRecoveryLevel) {
			pr_err("Unable to recover from DataOUT CRC"
				" failure while ERL=0, closing session.\n");
			iscsit_reject_cmd(cmd, ISCSI_REASON_DATA_DIGEST_ERROR,
					  buf);
			return DATAOUT_CANNOT_RECOVER;
		}

		iscsit_reject_cmd(cmd, ISCSI_REASON_DATA_DIGEST_ERROR, buf);
		return iscsit_dataout_post_crc_failed(cmd, buf);
	}
}

static void iscsit_handle_time2retain_timeout(unsigned long data)
{
	struct iscsi_session *sess = (struct iscsi_session *) data;
	struct iscsi_portal_group *tpg = sess->tpg;
	struct se_portal_group *se_tpg = &tpg->tpg_se_tpg;

	spin_lock_bh(&se_tpg->session_lock);
	if (sess->time2retain_timer_flags & ISCSI_TF_STOP) {
		spin_unlock_bh(&se_tpg->session_lock);
		return;
	}
	if (atomic_read(&sess->session_reinstatement)) {
		pr_err("Exiting Time2Retain handler because"
				" session_reinstatement=1\n");
		spin_unlock_bh(&se_tpg->session_lock);
		return;
	}
	sess->time2retain_timer_flags |= ISCSI_TF_EXPIRED;

	pr_err("Time2Retain timer expired for SID: %u, cleaning up"
			" iSCSI session.\n", sess->sid);
	{
	struct iscsi_tiqn *tiqn = tpg->tpg_tiqn;

	if (tiqn) {
		spin_lock(&tiqn->sess_err_stats.lock);
		strcpy(tiqn->sess_err_stats.last_sess_fail_rem_name,
			(void *)sess->sess_ops->InitiatorName);
		tiqn->sess_err_stats.last_sess_failure_type =
				ISCSI_SESS_ERR_CXN_TIMEOUT;
		tiqn->sess_err_stats.cxn_timeout_errors++;
		atomic_long_inc(&sess->conn_timeout_errors);
		spin_unlock(&tiqn->sess_err_stats.lock);
	}
	}

	spin_unlock_bh(&se_tpg->session_lock);
	target_put_session(sess->se_sess);
}

void iscsit_start_time2retain_handler(struct iscsi_session *sess)
{
	int tpg_active;
	/*
	 * Only start Time2Retain timer when the associated TPG is still in
	 * an ACTIVE (eg: not disabled or shutdown) state.
	 */
	spin_lock(&sess->tpg->tpg_state_lock);
	tpg_active = (sess->tpg->tpg_state == TPG_STATE_ACTIVE);
	spin_unlock(&sess->tpg->tpg_state_lock);

	if (!tpg_active)
		return;

	if (sess->time2retain_timer_flags & ISCSI_TF_RUNNING)
		return;

	pr_debug("Starting Time2Retain timer for %u seconds on"
		" SID: %u\n", sess->sess_ops->DefaultTime2Retain, sess->sid);

	init_timer(&sess->time2retain_timer);
	sess->time2retain_timer.expires =
		(get_jiffies_64() + sess->sess_ops->DefaultTime2Retain * HZ);
	sess->time2retain_timer.data = (unsigned long)sess;
	sess->time2retain_timer.function = iscsit_handle_time2retain_timeout;
	sess->time2retain_timer_flags &= ~ISCSI_TF_STOP;
	sess->time2retain_timer_flags |= ISCSI_TF_RUNNING;
	add_timer(&sess->time2retain_timer);
}

/*
 *	Called with spin_lock_bh(&struct se_portal_group->session_lock) held
 */
int iscsit_stop_time2retain_timer(struct iscsi_session *sess)
{
	struct iscsi_portal_group *tpg = sess->tpg;
	struct se_portal_group *se_tpg = &tpg->tpg_se_tpg;

	if (sess->time2retain_timer_flags & ISCSI_TF_EXPIRED)
		return -1;

	if (!(sess->time2retain_timer_flags & ISCSI_TF_RUNNING))
		return 0;

	sess->time2retain_timer_flags |= ISCSI_TF_STOP;
	spin_unlock(&se_tpg->session_lock);

	del_timer_sync(&sess->time2retain_timer);

	spin_lock(&se_tpg->session_lock);
	sess->time2retain_timer_flags &= ~ISCSI_TF_RUNNING;
	pr_debug("Stopped Time2Retain Timer for SID: %u\n",
			sess->sid);
	return 0;
}

void iscsit_connection_reinstatement_rcfr(struct iscsi_conn *conn)
{
	spin_lock_bh(&conn->state_lock);
	if (atomic_read(&conn->connection_exit)) {
		spin_unlock_bh(&conn->state_lock);
		goto sleep;
	}

	if (atomic_read(&conn->transport_failed)) {
		spin_unlock_bh(&conn->state_lock);
		goto sleep;
	}
	spin_unlock_bh(&conn->state_lock);

	if (conn->tx_thread && conn->tx_thread_active)
		send_sig(SIGINT, conn->tx_thread, 1);
	if (conn->rx_thread && conn->rx_thread_active)
		send_sig(SIGINT, conn->rx_thread, 1);

sleep:
	wait_for_completion(&conn->conn_wait_rcfr_comp);
	complete(&conn->conn_post_wait_comp);
}

void iscsit_cause_connection_reinstatement(struct iscsi_conn *conn, int sleep)
{
	spin_lock_bh(&conn->state_lock);
	if (atomic_read(&conn->connection_exit)) {
		spin_unlock_bh(&conn->state_lock);
		return;
	}

	if (atomic_read(&conn->transport_failed)) {
		spin_unlock_bh(&conn->state_lock);
		return;
	}

	if (atomic_read(&conn->connection_reinstatement)) {
		spin_unlock_bh(&conn->state_lock);
		return;
	}

	if (conn->tx_thread && conn->tx_thread_active)
		send_sig(SIGINT, conn->tx_thread, 1);
	if (conn->rx_thread && conn->rx_thread_active)
		send_sig(SIGINT, conn->rx_thread, 1);

	atomic_set(&conn->connection_reinstatement, 1);
	if (!sleep) {
		spin_unlock_bh(&conn->state_lock);
		return;
	}

	atomic_set(&conn->sleep_on_conn_wait_comp, 1);
	spin_unlock_bh(&conn->state_lock);

	wait_for_completion(&conn->conn_wait_comp);
	complete(&conn->conn_post_wait_comp);
}
EXPORT_SYMBOL(iscsit_cause_connection_reinstatement);

void iscsit_fall_back_to_erl0(struct iscsi_session *sess)
{
	pr_debug("Falling back to ErrorRecoveryLevel=0 for SID:"
			" %u\n", sess->sid);

	atomic_set(&sess->session_fall_back_to_erl0, 1);
}

static void iscsit_handle_connection_cleanup(struct iscsi_conn *conn)
{
	struct iscsi_session *sess = conn->sess;

	if ((sess->sess_ops->ErrorRecoveryLevel == 2) &&
	    !atomic_read(&sess->session_reinstatement) &&
	    !atomic_read(&sess->session_fall_back_to_erl0))
		iscsit_connection_recovery_transport_reset(conn);
	else {
		pr_debug("Performing cleanup for failed iSCSI"
			" Connection ID: %hu from %s\n", conn->cid,
			sess->sess_ops->InitiatorName);
		iscsit_close_connection(conn);
	}
}

void iscsit_take_action_for_connection_exit(struct iscsi_conn *conn)
{
	spin_lock_bh(&conn->state_lock);
	if (atomic_read(&conn->connection_exit)) {
		spin_unlock_bh(&conn->state_lock);
		return;
	}
	atomic_set(&conn->connection_exit, 1);

	if (conn->conn_state == TARG_CONN_STATE_IN_LOGOUT) {
		spin_unlock_bh(&conn->state_lock);
		iscsit_close_connection(conn);
		return;
	}

	if (conn->conn_state == TARG_CONN_STATE_CLEANUP_WAIT) {
		spin_unlock_bh(&conn->state_lock);
		return;
	}

	pr_debug("Moving to TARG_CONN_STATE_CLEANUP_WAIT.\n");
	conn->conn_state = TARG_CONN_STATE_CLEANUP_WAIT;
	spin_unlock_bh(&conn->state_lock);

	iscsit_handle_connection_cleanup(conn);
}

/*
 *	This is the simple function that makes the magic of
 *	sync and steering happen in the follow paradoxical order:
 *
 *	0) Receive conn->of_marker (bytes left until next OFMarker)
 *	   bytes into an offload buffer.  When we pass the exact number
 *	   of bytes in conn->of_marker, iscsit_dump_data_payload() and hence
 *	   rx_data() will automatically receive the identical u32 marker
 *	   values and store it in conn->of_marker_offset;
 *	1) Now conn->of_marker_offset will contain the offset to the start
 *	   of the next iSCSI PDU.  Dump these remaining bytes into another
 *	   offload buffer.
 *	2) We are done!
 *	   Next byte in the TCP stream will contain the next iSCSI PDU!
 *	   Cool Huh?!
 */
int iscsit_recover_from_unknown_opcode(struct iscsi_conn *conn)
{
	/*
	 * Make sure the remaining bytes to next maker is a sane value.
	 */
	if (conn->of_marker > (conn->conn_ops->OFMarkInt * 4)) {
		pr_err("Remaining bytes to OFMarker: %u exceeds"
			" OFMarkInt bytes: %u.\n", conn->of_marker,
				conn->conn_ops->OFMarkInt * 4);
		return -1;
	}

	pr_debug("Advancing %u bytes in TCP stream to get to the"
			" next OFMarker.\n", conn->of_marker);

	if (iscsit_dump_data_payload(conn, conn->of_marker, 0) < 0)
		return -1;

	/*
	 * Make sure the offset marker we retrived is a valid value.
	 */
	if (conn->of_marker_offset > (ISCSI_HDR_LEN + (ISCSI_CRC_LEN * 2) +
	    conn->conn_ops->MaxRecvDataSegmentLength)) {
		pr_err("OfMarker offset value: %u exceeds limit.\n",
			conn->of_marker_offset);
		return -1;
	}

	pr_debug("Discarding %u bytes of TCP stream to get to the"
			" next iSCSI Opcode.\n", conn->of_marker_offset);

	if (iscsit_dump_data_payload(conn, conn->of_marker_offset, 0) < 0)
		return -1;

	return 0;
}