blob: a0d2a423cea97e70b6745d48b63884c03e57d1de [file] [log] [blame]
Rafa³ Bilski86acd492007-02-05 19:57:25 +01001/*
2 * Based on documentation provided by Dave Jones. Thanks!
3 *
4 * Licensed under the terms of the GNU GPL License version 2.
5 *
6 * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
7 */
8
9#include <linux/kernel.h>
10#include <linux/module.h>
11#include <linux/init.h>
12#include <linux/cpufreq.h>
13#include <linux/ioport.h>
14#include <linux/slab.h>
Dave Jonesc9b8c872009-01-17 22:54:47 -050015#include <linux/timex.h>
16#include <linux/io.h>
17#include <linux/delay.h>
Rafa³ Bilski86acd492007-02-05 19:57:25 +010018
Andi Kleenfa8031a2012-01-26 00:09:12 +010019#include <asm/cpu_device_id.h>
Rafa³ Bilski86acd492007-02-05 19:57:25 +010020#include <asm/msr.h>
21#include <asm/tsc.h>
Rafa³ Bilski86acd492007-02-05 19:57:25 +010022
Rafał Bilski27e954c2011-07-21 22:11:29 +010023#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
24#include <linux/acpi.h>
25#include <acpi/processor.h>
26#endif
27
Rafa³ Bilski86acd492007-02-05 19:57:25 +010028#define EPS_BRAND_C7M 0
29#define EPS_BRAND_C7 1
30#define EPS_BRAND_EDEN 2
31#define EPS_BRAND_C3 3
Jesse Ahrens535ae382008-01-17 15:25:08 -060032#define EPS_BRAND_C7D 4
Rafa³ Bilski86acd492007-02-05 19:57:25 +010033
34struct eps_cpu_data {
35 u32 fsb;
Rafał Bilski27e954c2011-07-21 22:11:29 +010036#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
37 u32 bios_limit;
38#endif
Rafa³ Bilski86acd492007-02-05 19:57:25 +010039 struct cpufreq_frequency_table freq_table[];
40};
41
42static struct eps_cpu_data *eps_cpu[NR_CPUS];
43
Rafał Bilskied361bf2011-07-20 21:20:56 +010044/* Module parameters */
45static int freq_failsafe_off;
46static int voltage_failsafe_off;
Rafał Bilski826e5702011-07-23 23:35:28 +010047static int set_max_voltage;
Rafał Bilskied361bf2011-07-20 21:20:56 +010048
Rafał Bilski27e954c2011-07-21 22:11:29 +010049#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
50static int ignore_acpi_limit;
51
52static struct acpi_processor_performance *eps_acpi_cpu_perf;
53
54/* Minimum necessary to get acpi_processor_get_bios_limit() working */
55static int eps_acpi_init(void)
56{
Viresh Kumard5b73cd2013-08-06 22:53:06 +053057 eps_acpi_cpu_perf = kzalloc(sizeof(*eps_acpi_cpu_perf),
Rafał Bilski27e954c2011-07-21 22:11:29 +010058 GFP_KERNEL);
59 if (!eps_acpi_cpu_perf)
60 return -ENOMEM;
61
62 if (!zalloc_cpumask_var(&eps_acpi_cpu_perf->shared_cpu_map,
63 GFP_KERNEL)) {
64 kfree(eps_acpi_cpu_perf);
65 eps_acpi_cpu_perf = NULL;
66 return -ENOMEM;
67 }
68
69 if (acpi_processor_register_performance(eps_acpi_cpu_perf, 0)) {
70 free_cpumask_var(eps_acpi_cpu_perf->shared_cpu_map);
71 kfree(eps_acpi_cpu_perf);
72 eps_acpi_cpu_perf = NULL;
73 return -EIO;
74 }
75 return 0;
76}
77
78static int eps_acpi_exit(struct cpufreq_policy *policy)
79{
80 if (eps_acpi_cpu_perf) {
81 acpi_processor_unregister_performance(eps_acpi_cpu_perf, 0);
82 free_cpumask_var(eps_acpi_cpu_perf->shared_cpu_map);
83 kfree(eps_acpi_cpu_perf);
84 eps_acpi_cpu_perf = NULL;
85 }
86 return 0;
87}
88#endif
Rafa³ Bilski86acd492007-02-05 19:57:25 +010089
90static unsigned int eps_get(unsigned int cpu)
91{
92 struct eps_cpu_data *centaur;
93 u32 lo, hi;
94
95 if (cpu)
96 return 0;
97 centaur = eps_cpu[cpu];
98 if (centaur == NULL)
99 return 0;
100
101 /* Return current frequency */
102 rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
103 return centaur->fsb * ((lo >> 8) & 0xff);
104}
105
106static int eps_set_state(struct eps_cpu_data *centaur,
Viresh Kumarb43a7ff2013-03-24 11:56:43 +0530107 struct cpufreq_policy *policy,
Rafa³ Bilski86acd492007-02-05 19:57:25 +0100108 u32 dest_state)
109{
Rafa³ Bilski86acd492007-02-05 19:57:25 +0100110 u32 lo, hi;
Rafa³ Bilski86acd492007-02-05 19:57:25 +0100111 int i;
112
Rafa³ Bilski86acd492007-02-05 19:57:25 +0100113 /* Wait while CPU is busy */
114 rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
115 i = 0;
116 while (lo & ((1 << 16) | (1 << 17))) {
117 udelay(16);
118 rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
119 i++;
120 if (unlikely(i > 64)) {
Viresh Kumard4019f02013-08-14 19:38:24 +0530121 return -ENODEV;
Rafa³ Bilski86acd492007-02-05 19:57:25 +0100122 }
123 }
124 /* Set new multiplier and voltage */
125 wrmsr(MSR_IA32_PERF_CTL, dest_state & 0xffff, 0);
126 /* Wait until transition end */
127 i = 0;
128 do {
129 udelay(16);
130 rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
131 i++;
132 if (unlikely(i > 64)) {
Viresh Kumard4019f02013-08-14 19:38:24 +0530133 return -ENODEV;
Rafa³ Bilski86acd492007-02-05 19:57:25 +0100134 }
135 } while (lo & ((1 << 16) | (1 << 17)));
136
Dave Jones0e5aa8d2008-02-15 18:11:14 -0500137#ifdef DEBUG
138 {
139 u8 current_multiplier, current_voltage;
140
Jesse Ahrens535ae382008-01-17 15:25:08 -0600141 /* Print voltage and multiplier */
142 rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
143 current_voltage = lo & 0xff;
144 printk(KERN_INFO "eps: Current voltage = %dmV\n",
145 current_voltage * 16 + 700);
146 current_multiplier = (lo >> 8) & 0xff;
147 printk(KERN_INFO "eps: Current multiplier = %d\n",
148 current_multiplier);
Dave Jones0e5aa8d2008-02-15 18:11:14 -0500149 }
150#endif
Viresh Kumard4019f02013-08-14 19:38:24 +0530151 return 0;
Rafa³ Bilski86acd492007-02-05 19:57:25 +0100152}
153
Viresh Kumar9c0ebcf2013-10-25 19:45:48 +0530154static int eps_target(struct cpufreq_policy *policy, unsigned int index)
Rafa³ Bilski86acd492007-02-05 19:57:25 +0100155{
156 struct eps_cpu_data *centaur;
Rafa³ Bilski86acd492007-02-05 19:57:25 +0100157 unsigned int cpu = policy->cpu;
158 unsigned int dest_state;
159 int ret;
160
161 if (unlikely(eps_cpu[cpu] == NULL))
162 return -ENODEV;
163 centaur = eps_cpu[cpu];
164
Rafa³ Bilski86acd492007-02-05 19:57:25 +0100165 /* Make frequency transition */
Viresh Kumar9c0ebcf2013-10-25 19:45:48 +0530166 dest_state = centaur->freq_table[index].driver_data & 0xffff;
Viresh Kumarb43a7ff2013-03-24 11:56:43 +0530167 ret = eps_set_state(centaur, policy, dest_state);
Rafa³ Bilski86acd492007-02-05 19:57:25 +0100168 if (ret)
169 printk(KERN_ERR "eps: Timeout!\n");
170 return ret;
171}
172
Rafa³ Bilski86acd492007-02-05 19:57:25 +0100173static int eps_cpu_init(struct cpufreq_policy *policy)
174{
175 unsigned int i;
176 u32 lo, hi;
177 u64 val;
178 u8 current_multiplier, current_voltage;
179 u8 max_multiplier, max_voltage;
180 u8 min_multiplier, min_voltage;
Jesse Ahrens535ae382008-01-17 15:25:08 -0600181 u8 brand = 0;
Rafa³ Bilski86acd492007-02-05 19:57:25 +0100182 u32 fsb;
183 struct eps_cpu_data *centaur;
Jesse Ahrens535ae382008-01-17 15:25:08 -0600184 struct cpuinfo_x86 *c = &cpu_data(0);
Rafa³ Bilski86acd492007-02-05 19:57:25 +0100185 struct cpufreq_frequency_table *f_table;
186 int k, step, voltage;
187 int ret;
188 int states;
Rafał Bilski27e954c2011-07-21 22:11:29 +0100189#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
190 unsigned int limit;
191#endif
Rafa³ Bilski86acd492007-02-05 19:57:25 +0100192
193 if (policy->cpu != 0)
194 return -ENODEV;
195
196 /* Check brand */
Dave Jonese19717f2008-02-06 22:00:31 -0500197 printk(KERN_INFO "eps: Detected VIA ");
Jesse Ahrens535ae382008-01-17 15:25:08 -0600198
199 switch (c->x86_model) {
200 case 10:
201 rdmsr(0x1153, lo, hi);
202 brand = (((lo >> 2) ^ lo) >> 18) & 3;
203 printk(KERN_CONT "Model A ");
204 break;
205 case 13:
206 rdmsr(0x1154, lo, hi);
207 brand = (((lo >> 4) ^ (lo >> 2))) & 0x000000ff;
208 printk(KERN_CONT "Model D ");
209 break;
210 }
211
Dave Jonesc9b8c872009-01-17 22:54:47 -0500212 switch (brand) {
Rafa³ Bilski86acd492007-02-05 19:57:25 +0100213 case EPS_BRAND_C7M:
Dave Jonese19717f2008-02-06 22:00:31 -0500214 printk(KERN_CONT "C7-M\n");
Rafa³ Bilski86acd492007-02-05 19:57:25 +0100215 break;
216 case EPS_BRAND_C7:
Dave Jonese19717f2008-02-06 22:00:31 -0500217 printk(KERN_CONT "C7\n");
Rafa³ Bilski86acd492007-02-05 19:57:25 +0100218 break;
219 case EPS_BRAND_EDEN:
Dave Jonese19717f2008-02-06 22:00:31 -0500220 printk(KERN_CONT "Eden\n");
Rafa³ Bilski86acd492007-02-05 19:57:25 +0100221 break;
Jesse Ahrens535ae382008-01-17 15:25:08 -0600222 case EPS_BRAND_C7D:
223 printk(KERN_CONT "C7-D\n");
224 break;
Rafa³ Bilski86acd492007-02-05 19:57:25 +0100225 case EPS_BRAND_C3:
Dave Jonese19717f2008-02-06 22:00:31 -0500226 printk(KERN_CONT "C3\n");
Rafa³ Bilski86acd492007-02-05 19:57:25 +0100227 return -ENODEV;
228 break;
229 }
230 /* Enable Enhanced PowerSaver */
231 rdmsrl(MSR_IA32_MISC_ENABLE, val);
Vegard Nossumecab22a2009-02-20 11:56:38 +0100232 if (!(val & MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP)) {
233 val |= MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP;
Rafa³ Bilski86acd492007-02-05 19:57:25 +0100234 wrmsrl(MSR_IA32_MISC_ENABLE, val);
235 /* Can be locked at 0 */
236 rdmsrl(MSR_IA32_MISC_ENABLE, val);
Vegard Nossumecab22a2009-02-20 11:56:38 +0100237 if (!(val & MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP)) {
Dave Jonese19717f2008-02-06 22:00:31 -0500238 printk(KERN_INFO "eps: Can't enable Enhanced PowerSaver\n");
Rafa³ Bilski86acd492007-02-05 19:57:25 +0100239 return -ENODEV;
240 }
241 }
242
243 /* Print voltage and multiplier */
244 rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
245 current_voltage = lo & 0xff;
Dave Jonesc9b8c872009-01-17 22:54:47 -0500246 printk(KERN_INFO "eps: Current voltage = %dmV\n",
247 current_voltage * 16 + 700);
Rafa³ Bilski86acd492007-02-05 19:57:25 +0100248 current_multiplier = (lo >> 8) & 0xff;
Dave Jonese19717f2008-02-06 22:00:31 -0500249 printk(KERN_INFO "eps: Current multiplier = %d\n", current_multiplier);
Rafa³ Bilski86acd492007-02-05 19:57:25 +0100250
251 /* Print limits */
252 max_voltage = hi & 0xff;
Dave Jonesc9b8c872009-01-17 22:54:47 -0500253 printk(KERN_INFO "eps: Highest voltage = %dmV\n",
254 max_voltage * 16 + 700);
Rafa³ Bilski86acd492007-02-05 19:57:25 +0100255 max_multiplier = (hi >> 8) & 0xff;
Dave Jonese19717f2008-02-06 22:00:31 -0500256 printk(KERN_INFO "eps: Highest multiplier = %d\n", max_multiplier);
Rafa³ Bilski86acd492007-02-05 19:57:25 +0100257 min_voltage = (hi >> 16) & 0xff;
Dave Jonesc9b8c872009-01-17 22:54:47 -0500258 printk(KERN_INFO "eps: Lowest voltage = %dmV\n",
259 min_voltage * 16 + 700);
Rafa³ Bilski86acd492007-02-05 19:57:25 +0100260 min_multiplier = (hi >> 24) & 0xff;
Dave Jonese19717f2008-02-06 22:00:31 -0500261 printk(KERN_INFO "eps: Lowest multiplier = %d\n", min_multiplier);
Rafa³ Bilski86acd492007-02-05 19:57:25 +0100262
263 /* Sanity checks */
264 if (current_multiplier == 0 || max_multiplier == 0
265 || min_multiplier == 0)
266 return -EINVAL;
267 if (current_multiplier > max_multiplier
268 || max_multiplier <= min_multiplier)
269 return -EINVAL;
Jesse Ahrens535ae382008-01-17 15:25:08 -0600270 if (current_voltage > 0x1f || max_voltage > 0x1f)
Rafa³ Bilski86acd492007-02-05 19:57:25 +0100271 return -EINVAL;
Rafał Bilskied361bf2011-07-20 21:20:56 +0100272 if (max_voltage < min_voltage
273 || current_voltage < min_voltage
274 || current_voltage > max_voltage)
Rafa³ Bilski86acd492007-02-05 19:57:25 +0100275 return -EINVAL;
276
Rafał Bilskied361bf2011-07-20 21:20:56 +0100277 /* Check for systems using underclocked CPU */
278 if (!freq_failsafe_off && max_multiplier != current_multiplier) {
279 printk(KERN_INFO "eps: Your processor is running at different "
280 "frequency then its maximum. Aborting.\n");
281 printk(KERN_INFO "eps: You can use freq_failsafe_off option "
282 "to disable this check.\n");
283 return -EINVAL;
284 }
285 if (!voltage_failsafe_off && max_voltage != current_voltage) {
286 printk(KERN_INFO "eps: Your processor is running at different "
287 "voltage then its maximum. Aborting.\n");
288 printk(KERN_INFO "eps: You can use voltage_failsafe_off "
289 "option to disable this check.\n");
290 return -EINVAL;
291 }
292
Rafa³ Bilski86acd492007-02-05 19:57:25 +0100293 /* Calc FSB speed */
294 fsb = cpu_khz / current_multiplier;
Rafał Bilski27e954c2011-07-21 22:11:29 +0100295
296#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
297 /* Check for ACPI processor speed limit */
298 if (!ignore_acpi_limit && !eps_acpi_init()) {
299 if (!acpi_processor_get_bios_limit(policy->cpu, &limit)) {
300 printk(KERN_INFO "eps: ACPI limit %u.%uGHz\n",
301 limit/1000000,
302 (limit%1000000)/10000);
303 eps_acpi_exit(policy);
304 /* Check if max_multiplier is in BIOS limits */
305 if (limit && max_multiplier * fsb > limit) {
306 printk(KERN_INFO "eps: Aborting.\n");
307 return -EINVAL;
308 }
309 }
310 }
311#endif
312
Rafał Bilski826e5702011-07-23 23:35:28 +0100313 /* Allow user to set lower maximum voltage then that reported
314 * by processor */
315 if (brand == EPS_BRAND_C7M && set_max_voltage) {
316 u32 v;
317
318 /* Change mV to something hardware can use */
319 v = (set_max_voltage - 700) / 16;
320 /* Check if voltage is within limits */
321 if (v >= min_voltage && v <= max_voltage) {
322 printk(KERN_INFO "eps: Setting %dmV as maximum.\n",
323 v * 16 + 700);
324 max_voltage = v;
325 }
326 }
327
Rafa³ Bilski86acd492007-02-05 19:57:25 +0100328 /* Calc number of p-states supported */
329 if (brand == EPS_BRAND_C7M)
330 states = max_multiplier - min_multiplier + 1;
331 else
332 states = 2;
333
334 /* Allocate private data and frequency table for current cpu */
Viresh Kumard5b73cd2013-08-06 22:53:06 +0530335 centaur = kzalloc(sizeof(*centaur)
Rafa³ Bilski86acd492007-02-05 19:57:25 +0100336 + (states + 1) * sizeof(struct cpufreq_frequency_table),
337 GFP_KERNEL);
338 if (!centaur)
339 return -ENOMEM;
340 eps_cpu[0] = centaur;
341
342 /* Copy basic values */
343 centaur->fsb = fsb;
Rafał Bilski27e954c2011-07-21 22:11:29 +0100344#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
345 centaur->bios_limit = limit;
346#endif
Rafa³ Bilski86acd492007-02-05 19:57:25 +0100347
348 /* Fill frequency and MSR value table */
349 f_table = &centaur->freq_table[0];
Rafa³ Bilskib6f45a42007-02-12 22:19:12 +0100350 if (brand != EPS_BRAND_C7M) {
Rafa³ Bilski86acd492007-02-05 19:57:25 +0100351 f_table[0].frequency = fsb * min_multiplier;
Viresh Kumar50701582013-03-30 16:25:15 +0530352 f_table[0].driver_data = (min_multiplier << 8) | min_voltage;
Rafa³ Bilski86acd492007-02-05 19:57:25 +0100353 f_table[1].frequency = fsb * max_multiplier;
Viresh Kumar50701582013-03-30 16:25:15 +0530354 f_table[1].driver_data = (max_multiplier << 8) | max_voltage;
Rafa³ Bilski86acd492007-02-05 19:57:25 +0100355 f_table[2].frequency = CPUFREQ_TABLE_END;
356 } else {
357 k = 0;
358 step = ((max_voltage - min_voltage) * 256)
359 / (max_multiplier - min_multiplier);
360 for (i = min_multiplier; i <= max_multiplier; i++) {
361 voltage = (k * step) / 256 + min_voltage;
362 f_table[k].frequency = fsb * i;
Viresh Kumar50701582013-03-30 16:25:15 +0530363 f_table[k].driver_data = (i << 8) | voltage;
Rafa³ Bilski86acd492007-02-05 19:57:25 +0100364 k++;
365 }
366 f_table[k].frequency = CPUFREQ_TABLE_END;
367 }
368
Rafa³ Bilski86acd492007-02-05 19:57:25 +0100369 policy->cpuinfo.transition_latency = 140000; /* 844mV -> 700mV in ns */
Rafa³ Bilski86acd492007-02-05 19:57:25 +0100370
Viresh Kumar7813ed72013-09-16 18:56:14 +0530371 ret = cpufreq_table_validate_and_show(policy, &centaur->freq_table[0]);
Rafa³ Bilski86acd492007-02-05 19:57:25 +0100372 if (ret) {
373 kfree(centaur);
374 return ret;
375 }
376
Rafa³ Bilski86acd492007-02-05 19:57:25 +0100377 return 0;
378}
379
380static int eps_cpu_exit(struct cpufreq_policy *policy)
381{
382 unsigned int cpu = policy->cpu;
Rafa³ Bilski86acd492007-02-05 19:57:25 +0100383
Rafa³ Bilski86acd492007-02-05 19:57:25 +0100384 /* Bye */
Rafa³ Bilski86acd492007-02-05 19:57:25 +0100385 kfree(eps_cpu[cpu]);
386 eps_cpu[cpu] = NULL;
387 return 0;
388}
389
Linus Torvalds221dee22007-02-26 14:55:48 -0800390static struct cpufreq_driver eps_driver = {
Viresh Kumarf51d2ac2013-10-03 20:28:04 +0530391 .verify = cpufreq_generic_frequency_table_verify,
Viresh Kumar9c0ebcf2013-10-25 19:45:48 +0530392 .target_index = eps_target,
Rafa³ Bilski86acd492007-02-05 19:57:25 +0100393 .init = eps_cpu_init,
394 .exit = eps_cpu_exit,
395 .get = eps_get,
396 .name = "e_powersaver",
Viresh Kumarf51d2ac2013-10-03 20:28:04 +0530397 .attr = cpufreq_generic_attr,
Rafa³ Bilski86acd492007-02-05 19:57:25 +0100398};
399
Andi Kleenfa8031a2012-01-26 00:09:12 +0100400
401/* This driver will work only on Centaur C7 processors with
402 * Enhanced SpeedStep/PowerSaver registers */
403static const struct x86_cpu_id eps_cpu_id[] = {
404 { X86_VENDOR_CENTAUR, 6, X86_MODEL_ANY, X86_FEATURE_EST },
405 {}
406};
407MODULE_DEVICE_TABLE(x86cpu, eps_cpu_id);
408
Rafa³ Bilski86acd492007-02-05 19:57:25 +0100409static int __init eps_init(void)
410{
Andi Kleenfa8031a2012-01-26 00:09:12 +0100411 if (!x86_match_cpu(eps_cpu_id) || boot_cpu_data.x86_model < 10)
Rafa³ Bilski86acd492007-02-05 19:57:25 +0100412 return -ENODEV;
Rafa³ Bilski86acd492007-02-05 19:57:25 +0100413 if (cpufreq_register_driver(&eps_driver))
414 return -EINVAL;
415 return 0;
416}
417
418static void __exit eps_exit(void)
419{
420 cpufreq_unregister_driver(&eps_driver);
421}
422
Rafał Bilskied361bf2011-07-20 21:20:56 +0100423/* Allow user to overclock his machine or to change frequency to higher after
424 * unloading module */
425module_param(freq_failsafe_off, int, 0644);
426MODULE_PARM_DESC(freq_failsafe_off, "Disable current vs max frequency check");
427module_param(voltage_failsafe_off, int, 0644);
428MODULE_PARM_DESC(voltage_failsafe_off, "Disable current vs max voltage check");
Rafał Bilski27e954c2011-07-21 22:11:29 +0100429#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
430module_param(ignore_acpi_limit, int, 0644);
431MODULE_PARM_DESC(ignore_acpi_limit, "Don't check ACPI's processor speed limit");
432#endif
Rafał Bilski826e5702011-07-23 23:35:28 +0100433module_param(set_max_voltage, int, 0644);
434MODULE_PARM_DESC(set_max_voltage, "Set maximum CPU voltage (mV) C7-M only");
Rafał Bilskied361bf2011-07-20 21:20:56 +0100435
Dave Jonesc9b8c872009-01-17 22:54:47 -0500436MODULE_AUTHOR("Rafal Bilski <rafalbilski@interia.pl>");
Rafa³ Bilski86acd492007-02-05 19:57:25 +0100437MODULE_DESCRIPTION("Enhanced PowerSaver driver for VIA C7 CPU's.");
438MODULE_LICENSE("GPL");
439
440module_init(eps_init);
441module_exit(eps_exit);