Sascha Hauer | 1ec1e82 | 2010-09-30 13:56:34 +0000 | [diff] [blame] | 1 | /* |
| 2 | * drivers/dma/imx-sdma.c |
| 3 | * |
| 4 | * This file contains a driver for the Freescale Smart DMA engine |
| 5 | * |
| 6 | * Copyright 2010 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de> |
| 7 | * |
| 8 | * Based on code from Freescale: |
| 9 | * |
| 10 | * Copyright 2004-2009 Freescale Semiconductor, Inc. All Rights Reserved. |
| 11 | * |
| 12 | * The code contained herein is licensed under the GNU General Public |
| 13 | * License. You may obtain a copy of the GNU General Public License |
| 14 | * Version 2 or later at the following locations: |
| 15 | * |
| 16 | * http://www.opensource.org/licenses/gpl-license.html |
| 17 | * http://www.gnu.org/copyleft/gpl.html |
| 18 | */ |
| 19 | |
| 20 | #include <linux/init.h> |
| 21 | #include <linux/types.h> |
| 22 | #include <linux/mm.h> |
| 23 | #include <linux/interrupt.h> |
| 24 | #include <linux/clk.h> |
| 25 | #include <linux/wait.h> |
| 26 | #include <linux/sched.h> |
| 27 | #include <linux/semaphore.h> |
| 28 | #include <linux/spinlock.h> |
| 29 | #include <linux/device.h> |
| 30 | #include <linux/dma-mapping.h> |
| 31 | #include <linux/firmware.h> |
| 32 | #include <linux/slab.h> |
| 33 | #include <linux/platform_device.h> |
| 34 | #include <linux/dmaengine.h> |
| 35 | |
| 36 | #include <asm/irq.h> |
| 37 | #include <mach/sdma.h> |
| 38 | #include <mach/dma.h> |
| 39 | #include <mach/hardware.h> |
| 40 | |
| 41 | /* SDMA registers */ |
| 42 | #define SDMA_H_C0PTR 0x000 |
| 43 | #define SDMA_H_INTR 0x004 |
| 44 | #define SDMA_H_STATSTOP 0x008 |
| 45 | #define SDMA_H_START 0x00c |
| 46 | #define SDMA_H_EVTOVR 0x010 |
| 47 | #define SDMA_H_DSPOVR 0x014 |
| 48 | #define SDMA_H_HOSTOVR 0x018 |
| 49 | #define SDMA_H_EVTPEND 0x01c |
| 50 | #define SDMA_H_DSPENBL 0x020 |
| 51 | #define SDMA_H_RESET 0x024 |
| 52 | #define SDMA_H_EVTERR 0x028 |
| 53 | #define SDMA_H_INTRMSK 0x02c |
| 54 | #define SDMA_H_PSW 0x030 |
| 55 | #define SDMA_H_EVTERRDBG 0x034 |
| 56 | #define SDMA_H_CONFIG 0x038 |
| 57 | #define SDMA_ONCE_ENB 0x040 |
| 58 | #define SDMA_ONCE_DATA 0x044 |
| 59 | #define SDMA_ONCE_INSTR 0x048 |
| 60 | #define SDMA_ONCE_STAT 0x04c |
| 61 | #define SDMA_ONCE_CMD 0x050 |
| 62 | #define SDMA_EVT_MIRROR 0x054 |
| 63 | #define SDMA_ILLINSTADDR 0x058 |
| 64 | #define SDMA_CHN0ADDR 0x05c |
| 65 | #define SDMA_ONCE_RTB 0x060 |
| 66 | #define SDMA_XTRIG_CONF1 0x070 |
| 67 | #define SDMA_XTRIG_CONF2 0x074 |
| 68 | #define SDMA_CHNENBL0_V2 0x200 |
| 69 | #define SDMA_CHNENBL0_V1 0x080 |
| 70 | #define SDMA_CHNPRI_0 0x100 |
| 71 | |
| 72 | /* |
| 73 | * Buffer descriptor status values. |
| 74 | */ |
| 75 | #define BD_DONE 0x01 |
| 76 | #define BD_WRAP 0x02 |
| 77 | #define BD_CONT 0x04 |
| 78 | #define BD_INTR 0x08 |
| 79 | #define BD_RROR 0x10 |
| 80 | #define BD_LAST 0x20 |
| 81 | #define BD_EXTD 0x80 |
| 82 | |
| 83 | /* |
| 84 | * Data Node descriptor status values. |
| 85 | */ |
| 86 | #define DND_END_OF_FRAME 0x80 |
| 87 | #define DND_END_OF_XFER 0x40 |
| 88 | #define DND_DONE 0x20 |
| 89 | #define DND_UNUSED 0x01 |
| 90 | |
| 91 | /* |
| 92 | * IPCV2 descriptor status values. |
| 93 | */ |
| 94 | #define BD_IPCV2_END_OF_FRAME 0x40 |
| 95 | |
| 96 | #define IPCV2_MAX_NODES 50 |
| 97 | /* |
| 98 | * Error bit set in the CCB status field by the SDMA, |
| 99 | * in setbd routine, in case of a transfer error |
| 100 | */ |
| 101 | #define DATA_ERROR 0x10000000 |
| 102 | |
| 103 | /* |
| 104 | * Buffer descriptor commands. |
| 105 | */ |
| 106 | #define C0_ADDR 0x01 |
| 107 | #define C0_LOAD 0x02 |
| 108 | #define C0_DUMP 0x03 |
| 109 | #define C0_SETCTX 0x07 |
| 110 | #define C0_GETCTX 0x03 |
| 111 | #define C0_SETDM 0x01 |
| 112 | #define C0_SETPM 0x04 |
| 113 | #define C0_GETDM 0x02 |
| 114 | #define C0_GETPM 0x08 |
| 115 | /* |
| 116 | * Change endianness indicator in the BD command field |
| 117 | */ |
| 118 | #define CHANGE_ENDIANNESS 0x80 |
| 119 | |
| 120 | /* |
| 121 | * Mode/Count of data node descriptors - IPCv2 |
| 122 | */ |
| 123 | struct sdma_mode_count { |
| 124 | u32 count : 16; /* size of the buffer pointed by this BD */ |
| 125 | u32 status : 8; /* E,R,I,C,W,D status bits stored here */ |
| 126 | u32 command : 8; /* command mostlky used for channel 0 */ |
| 127 | }; |
| 128 | |
| 129 | /* |
| 130 | * Buffer descriptor |
| 131 | */ |
| 132 | struct sdma_buffer_descriptor { |
| 133 | struct sdma_mode_count mode; |
| 134 | u32 buffer_addr; /* address of the buffer described */ |
| 135 | u32 ext_buffer_addr; /* extended buffer address */ |
| 136 | } __attribute__ ((packed)); |
| 137 | |
| 138 | /** |
| 139 | * struct sdma_channel_control - Channel control Block |
| 140 | * |
| 141 | * @current_bd_ptr current buffer descriptor processed |
| 142 | * @base_bd_ptr first element of buffer descriptor array |
| 143 | * @unused padding. The SDMA engine expects an array of 128 byte |
| 144 | * control blocks |
| 145 | */ |
| 146 | struct sdma_channel_control { |
| 147 | u32 current_bd_ptr; |
| 148 | u32 base_bd_ptr; |
| 149 | u32 unused[2]; |
| 150 | } __attribute__ ((packed)); |
| 151 | |
| 152 | /** |
| 153 | * struct sdma_state_registers - SDMA context for a channel |
| 154 | * |
| 155 | * @pc: program counter |
| 156 | * @t: test bit: status of arithmetic & test instruction |
| 157 | * @rpc: return program counter |
| 158 | * @sf: source fault while loading data |
| 159 | * @spc: loop start program counter |
| 160 | * @df: destination fault while storing data |
| 161 | * @epc: loop end program counter |
| 162 | * @lm: loop mode |
| 163 | */ |
| 164 | struct sdma_state_registers { |
| 165 | u32 pc :14; |
| 166 | u32 unused1: 1; |
| 167 | u32 t : 1; |
| 168 | u32 rpc :14; |
| 169 | u32 unused0: 1; |
| 170 | u32 sf : 1; |
| 171 | u32 spc :14; |
| 172 | u32 unused2: 1; |
| 173 | u32 df : 1; |
| 174 | u32 epc :14; |
| 175 | u32 lm : 2; |
| 176 | } __attribute__ ((packed)); |
| 177 | |
| 178 | /** |
| 179 | * struct sdma_context_data - sdma context specific to a channel |
| 180 | * |
| 181 | * @channel_state: channel state bits |
| 182 | * @gReg: general registers |
| 183 | * @mda: burst dma destination address register |
| 184 | * @msa: burst dma source address register |
| 185 | * @ms: burst dma status register |
| 186 | * @md: burst dma data register |
| 187 | * @pda: peripheral dma destination address register |
| 188 | * @psa: peripheral dma source address register |
| 189 | * @ps: peripheral dma status register |
| 190 | * @pd: peripheral dma data register |
| 191 | * @ca: CRC polynomial register |
| 192 | * @cs: CRC accumulator register |
| 193 | * @dda: dedicated core destination address register |
| 194 | * @dsa: dedicated core source address register |
| 195 | * @ds: dedicated core status register |
| 196 | * @dd: dedicated core data register |
| 197 | */ |
| 198 | struct sdma_context_data { |
| 199 | struct sdma_state_registers channel_state; |
| 200 | u32 gReg[8]; |
| 201 | u32 mda; |
| 202 | u32 msa; |
| 203 | u32 ms; |
| 204 | u32 md; |
| 205 | u32 pda; |
| 206 | u32 psa; |
| 207 | u32 ps; |
| 208 | u32 pd; |
| 209 | u32 ca; |
| 210 | u32 cs; |
| 211 | u32 dda; |
| 212 | u32 dsa; |
| 213 | u32 ds; |
| 214 | u32 dd; |
| 215 | u32 scratch0; |
| 216 | u32 scratch1; |
| 217 | u32 scratch2; |
| 218 | u32 scratch3; |
| 219 | u32 scratch4; |
| 220 | u32 scratch5; |
| 221 | u32 scratch6; |
| 222 | u32 scratch7; |
| 223 | } __attribute__ ((packed)); |
| 224 | |
| 225 | #define NUM_BD (int)(PAGE_SIZE / sizeof(struct sdma_buffer_descriptor)) |
| 226 | |
| 227 | struct sdma_engine; |
| 228 | |
| 229 | /** |
| 230 | * struct sdma_channel - housekeeping for a SDMA channel |
| 231 | * |
| 232 | * @sdma pointer to the SDMA engine for this channel |
Sascha Hauer | 23889c6 | 2011-01-31 10:56:58 +0100 | [diff] [blame] | 233 | * @channel the channel number, matches dmaengine chan_id + 1 |
Sascha Hauer | 1ec1e82 | 2010-09-30 13:56:34 +0000 | [diff] [blame] | 234 | * @direction transfer type. Needed for setting SDMA script |
| 235 | * @peripheral_type Peripheral type. Needed for setting SDMA script |
| 236 | * @event_id0 aka dma request line |
| 237 | * @event_id1 for channels that use 2 events |
| 238 | * @word_size peripheral access size |
| 239 | * @buf_tail ID of the buffer that was processed |
| 240 | * @done channel completion |
| 241 | * @num_bd max NUM_BD. number of descriptors currently handling |
| 242 | */ |
| 243 | struct sdma_channel { |
| 244 | struct sdma_engine *sdma; |
| 245 | unsigned int channel; |
| 246 | enum dma_data_direction direction; |
| 247 | enum sdma_peripheral_type peripheral_type; |
| 248 | unsigned int event_id0; |
| 249 | unsigned int event_id1; |
| 250 | enum dma_slave_buswidth word_size; |
| 251 | unsigned int buf_tail; |
| 252 | struct completion done; |
| 253 | unsigned int num_bd; |
| 254 | struct sdma_buffer_descriptor *bd; |
| 255 | dma_addr_t bd_phys; |
| 256 | unsigned int pc_from_device, pc_to_device; |
| 257 | unsigned long flags; |
| 258 | dma_addr_t per_address; |
| 259 | u32 event_mask0, event_mask1; |
| 260 | u32 watermark_level; |
| 261 | u32 shp_addr, per_addr; |
| 262 | struct dma_chan chan; |
| 263 | spinlock_t lock; |
| 264 | struct dma_async_tx_descriptor desc; |
| 265 | dma_cookie_t last_completed; |
| 266 | enum dma_status status; |
| 267 | }; |
| 268 | |
| 269 | #define IMX_DMA_SG_LOOP (1 << 0) |
| 270 | |
| 271 | #define MAX_DMA_CHANNELS 32 |
| 272 | #define MXC_SDMA_DEFAULT_PRIORITY 1 |
| 273 | #define MXC_SDMA_MIN_PRIORITY 1 |
| 274 | #define MXC_SDMA_MAX_PRIORITY 7 |
| 275 | |
Sascha Hauer | 1ec1e82 | 2010-09-30 13:56:34 +0000 | [diff] [blame] | 276 | #define SDMA_FIRMWARE_MAGIC 0x414d4453 |
| 277 | |
| 278 | /** |
| 279 | * struct sdma_firmware_header - Layout of the firmware image |
| 280 | * |
| 281 | * @magic "SDMA" |
| 282 | * @version_major increased whenever layout of struct sdma_script_start_addrs |
| 283 | * changes. |
| 284 | * @version_minor firmware minor version (for binary compatible changes) |
| 285 | * @script_addrs_start offset of struct sdma_script_start_addrs in this image |
| 286 | * @num_script_addrs Number of script addresses in this image |
| 287 | * @ram_code_start offset of SDMA ram image in this firmware image |
| 288 | * @ram_code_size size of SDMA ram image |
| 289 | * @script_addrs Stores the start address of the SDMA scripts |
| 290 | * (in SDMA memory space) |
| 291 | */ |
| 292 | struct sdma_firmware_header { |
| 293 | u32 magic; |
| 294 | u32 version_major; |
| 295 | u32 version_minor; |
| 296 | u32 script_addrs_start; |
| 297 | u32 num_script_addrs; |
| 298 | u32 ram_code_start; |
| 299 | u32 ram_code_size; |
| 300 | }; |
| 301 | |
| 302 | struct sdma_engine { |
| 303 | struct device *dev; |
Sascha Hauer | b9b3f82 | 2011-01-12 12:12:31 +0100 | [diff] [blame] | 304 | struct device_dma_parameters dma_parms; |
Sascha Hauer | 1ec1e82 | 2010-09-30 13:56:34 +0000 | [diff] [blame] | 305 | struct sdma_channel channel[MAX_DMA_CHANNELS]; |
| 306 | struct sdma_channel_control *channel_control; |
| 307 | void __iomem *regs; |
| 308 | unsigned int version; |
| 309 | unsigned int num_events; |
| 310 | struct sdma_context_data *context; |
| 311 | dma_addr_t context_phys; |
| 312 | struct dma_device dma_device; |
| 313 | struct clk *clk; |
| 314 | struct sdma_script_start_addrs *script_addrs; |
| 315 | }; |
| 316 | |
| 317 | #define SDMA_H_CONFIG_DSPDMA (1 << 12) /* indicates if the DSPDMA is used */ |
| 318 | #define SDMA_H_CONFIG_RTD_PINS (1 << 11) /* indicates if Real-Time Debug pins are enabled */ |
| 319 | #define SDMA_H_CONFIG_ACR (1 << 4) /* indicates if AHB freq /core freq = 2 or 1 */ |
| 320 | #define SDMA_H_CONFIG_CSM (3) /* indicates which context switch mode is selected*/ |
| 321 | |
| 322 | static inline u32 chnenbl_ofs(struct sdma_engine *sdma, unsigned int event) |
| 323 | { |
| 324 | u32 chnenbl0 = (sdma->version == 2 ? SDMA_CHNENBL0_V2 : SDMA_CHNENBL0_V1); |
| 325 | |
| 326 | return chnenbl0 + event * 4; |
| 327 | } |
| 328 | |
| 329 | static int sdma_config_ownership(struct sdma_channel *sdmac, |
| 330 | bool event_override, bool mcu_override, bool dsp_override) |
| 331 | { |
| 332 | struct sdma_engine *sdma = sdmac->sdma; |
| 333 | int channel = sdmac->channel; |
| 334 | u32 evt, mcu, dsp; |
| 335 | |
| 336 | if (event_override && mcu_override && dsp_override) |
| 337 | return -EINVAL; |
| 338 | |
| 339 | evt = __raw_readl(sdma->regs + SDMA_H_EVTOVR); |
| 340 | mcu = __raw_readl(sdma->regs + SDMA_H_HOSTOVR); |
| 341 | dsp = __raw_readl(sdma->regs + SDMA_H_DSPOVR); |
| 342 | |
| 343 | if (dsp_override) |
| 344 | dsp &= ~(1 << channel); |
| 345 | else |
| 346 | dsp |= (1 << channel); |
| 347 | |
| 348 | if (event_override) |
| 349 | evt &= ~(1 << channel); |
| 350 | else |
| 351 | evt |= (1 << channel); |
| 352 | |
| 353 | if (mcu_override) |
| 354 | mcu &= ~(1 << channel); |
| 355 | else |
| 356 | mcu |= (1 << channel); |
| 357 | |
| 358 | __raw_writel(evt, sdma->regs + SDMA_H_EVTOVR); |
| 359 | __raw_writel(mcu, sdma->regs + SDMA_H_HOSTOVR); |
| 360 | __raw_writel(dsp, sdma->regs + SDMA_H_DSPOVR); |
| 361 | |
| 362 | return 0; |
| 363 | } |
| 364 | |
| 365 | /* |
| 366 | * sdma_run_channel - run a channel and wait till it's done |
| 367 | */ |
| 368 | static int sdma_run_channel(struct sdma_channel *sdmac) |
| 369 | { |
| 370 | struct sdma_engine *sdma = sdmac->sdma; |
| 371 | int channel = sdmac->channel; |
| 372 | int ret; |
| 373 | |
| 374 | init_completion(&sdmac->done); |
| 375 | |
| 376 | __raw_writel(1 << channel, sdma->regs + SDMA_H_START); |
| 377 | |
| 378 | ret = wait_for_completion_timeout(&sdmac->done, HZ); |
| 379 | |
| 380 | return ret ? 0 : -ETIMEDOUT; |
| 381 | } |
| 382 | |
| 383 | static int sdma_load_script(struct sdma_engine *sdma, void *buf, int size, |
| 384 | u32 address) |
| 385 | { |
| 386 | struct sdma_buffer_descriptor *bd0 = sdma->channel[0].bd; |
| 387 | void *buf_virt; |
| 388 | dma_addr_t buf_phys; |
| 389 | int ret; |
| 390 | |
| 391 | buf_virt = dma_alloc_coherent(NULL, |
| 392 | size, |
| 393 | &buf_phys, GFP_KERNEL); |
| 394 | if (!buf_virt) |
| 395 | return -ENOMEM; |
| 396 | |
| 397 | bd0->mode.command = C0_SETPM; |
| 398 | bd0->mode.status = BD_DONE | BD_INTR | BD_WRAP | BD_EXTD; |
| 399 | bd0->mode.count = size / 2; |
| 400 | bd0->buffer_addr = buf_phys; |
| 401 | bd0->ext_buffer_addr = address; |
| 402 | |
| 403 | memcpy(buf_virt, buf, size); |
| 404 | |
| 405 | ret = sdma_run_channel(&sdma->channel[0]); |
| 406 | |
| 407 | dma_free_coherent(NULL, size, buf_virt, buf_phys); |
| 408 | |
| 409 | return ret; |
| 410 | } |
| 411 | |
| 412 | static void sdma_event_enable(struct sdma_channel *sdmac, unsigned int event) |
| 413 | { |
| 414 | struct sdma_engine *sdma = sdmac->sdma; |
| 415 | int channel = sdmac->channel; |
| 416 | u32 val; |
| 417 | u32 chnenbl = chnenbl_ofs(sdma, event); |
| 418 | |
| 419 | val = __raw_readl(sdma->regs + chnenbl); |
| 420 | val |= (1 << channel); |
| 421 | __raw_writel(val, sdma->regs + chnenbl); |
| 422 | } |
| 423 | |
| 424 | static void sdma_event_disable(struct sdma_channel *sdmac, unsigned int event) |
| 425 | { |
| 426 | struct sdma_engine *sdma = sdmac->sdma; |
| 427 | int channel = sdmac->channel; |
| 428 | u32 chnenbl = chnenbl_ofs(sdma, event); |
| 429 | u32 val; |
| 430 | |
| 431 | val = __raw_readl(sdma->regs + chnenbl); |
| 432 | val &= ~(1 << channel); |
| 433 | __raw_writel(val, sdma->regs + chnenbl); |
| 434 | } |
| 435 | |
| 436 | static void sdma_handle_channel_loop(struct sdma_channel *sdmac) |
| 437 | { |
| 438 | struct sdma_buffer_descriptor *bd; |
| 439 | |
| 440 | /* |
| 441 | * loop mode. Iterate over descriptors, re-setup them and |
| 442 | * call callback function. |
| 443 | */ |
| 444 | while (1) { |
| 445 | bd = &sdmac->bd[sdmac->buf_tail]; |
| 446 | |
| 447 | if (bd->mode.status & BD_DONE) |
| 448 | break; |
| 449 | |
| 450 | if (bd->mode.status & BD_RROR) |
| 451 | sdmac->status = DMA_ERROR; |
| 452 | else |
Shawn Guo | 1e9cebb | 2011-01-20 05:50:38 +0800 | [diff] [blame] | 453 | sdmac->status = DMA_IN_PROGRESS; |
Sascha Hauer | 1ec1e82 | 2010-09-30 13:56:34 +0000 | [diff] [blame] | 454 | |
| 455 | bd->mode.status |= BD_DONE; |
| 456 | sdmac->buf_tail++; |
| 457 | sdmac->buf_tail %= sdmac->num_bd; |
| 458 | |
| 459 | if (sdmac->desc.callback) |
| 460 | sdmac->desc.callback(sdmac->desc.callback_param); |
| 461 | } |
| 462 | } |
| 463 | |
| 464 | static void mxc_sdma_handle_channel_normal(struct sdma_channel *sdmac) |
| 465 | { |
| 466 | struct sdma_buffer_descriptor *bd; |
| 467 | int i, error = 0; |
| 468 | |
| 469 | /* |
| 470 | * non loop mode. Iterate over all descriptors, collect |
| 471 | * errors and call callback function |
| 472 | */ |
| 473 | for (i = 0; i < sdmac->num_bd; i++) { |
| 474 | bd = &sdmac->bd[i]; |
| 475 | |
| 476 | if (bd->mode.status & (BD_DONE | BD_RROR)) |
| 477 | error = -EIO; |
| 478 | } |
| 479 | |
| 480 | if (error) |
| 481 | sdmac->status = DMA_ERROR; |
| 482 | else |
| 483 | sdmac->status = DMA_SUCCESS; |
| 484 | |
| 485 | if (sdmac->desc.callback) |
| 486 | sdmac->desc.callback(sdmac->desc.callback_param); |
| 487 | sdmac->last_completed = sdmac->desc.cookie; |
| 488 | } |
| 489 | |
| 490 | static void mxc_sdma_handle_channel(struct sdma_channel *sdmac) |
| 491 | { |
| 492 | complete(&sdmac->done); |
| 493 | |
| 494 | /* not interested in channel 0 interrupts */ |
| 495 | if (sdmac->channel == 0) |
| 496 | return; |
| 497 | |
| 498 | if (sdmac->flags & IMX_DMA_SG_LOOP) |
| 499 | sdma_handle_channel_loop(sdmac); |
| 500 | else |
| 501 | mxc_sdma_handle_channel_normal(sdmac); |
| 502 | } |
| 503 | |
| 504 | static irqreturn_t sdma_int_handler(int irq, void *dev_id) |
| 505 | { |
| 506 | struct sdma_engine *sdma = dev_id; |
| 507 | u32 stat; |
| 508 | |
| 509 | stat = __raw_readl(sdma->regs + SDMA_H_INTR); |
| 510 | __raw_writel(stat, sdma->regs + SDMA_H_INTR); |
| 511 | |
| 512 | while (stat) { |
| 513 | int channel = fls(stat) - 1; |
| 514 | struct sdma_channel *sdmac = &sdma->channel[channel]; |
| 515 | |
| 516 | mxc_sdma_handle_channel(sdmac); |
| 517 | |
| 518 | stat &= ~(1 << channel); |
| 519 | } |
| 520 | |
| 521 | return IRQ_HANDLED; |
| 522 | } |
| 523 | |
| 524 | /* |
| 525 | * sets the pc of SDMA script according to the peripheral type |
| 526 | */ |
| 527 | static void sdma_get_pc(struct sdma_channel *sdmac, |
| 528 | enum sdma_peripheral_type peripheral_type) |
| 529 | { |
| 530 | struct sdma_engine *sdma = sdmac->sdma; |
| 531 | int per_2_emi = 0, emi_2_per = 0; |
| 532 | /* |
| 533 | * These are needed once we start to support transfers between |
| 534 | * two peripherals or memory-to-memory transfers |
| 535 | */ |
| 536 | int per_2_per = 0, emi_2_emi = 0; |
| 537 | |
| 538 | sdmac->pc_from_device = 0; |
| 539 | sdmac->pc_to_device = 0; |
| 540 | |
| 541 | switch (peripheral_type) { |
| 542 | case IMX_DMATYPE_MEMORY: |
| 543 | emi_2_emi = sdma->script_addrs->ap_2_ap_addr; |
| 544 | break; |
| 545 | case IMX_DMATYPE_DSP: |
| 546 | emi_2_per = sdma->script_addrs->bp_2_ap_addr; |
| 547 | per_2_emi = sdma->script_addrs->ap_2_bp_addr; |
| 548 | break; |
| 549 | case IMX_DMATYPE_FIRI: |
| 550 | per_2_emi = sdma->script_addrs->firi_2_mcu_addr; |
| 551 | emi_2_per = sdma->script_addrs->mcu_2_firi_addr; |
| 552 | break; |
| 553 | case IMX_DMATYPE_UART: |
| 554 | per_2_emi = sdma->script_addrs->uart_2_mcu_addr; |
| 555 | emi_2_per = sdma->script_addrs->mcu_2_app_addr; |
| 556 | break; |
| 557 | case IMX_DMATYPE_UART_SP: |
| 558 | per_2_emi = sdma->script_addrs->uartsh_2_mcu_addr; |
| 559 | emi_2_per = sdma->script_addrs->mcu_2_shp_addr; |
| 560 | break; |
| 561 | case IMX_DMATYPE_ATA: |
| 562 | per_2_emi = sdma->script_addrs->ata_2_mcu_addr; |
| 563 | emi_2_per = sdma->script_addrs->mcu_2_ata_addr; |
| 564 | break; |
| 565 | case IMX_DMATYPE_CSPI: |
| 566 | case IMX_DMATYPE_EXT: |
| 567 | case IMX_DMATYPE_SSI: |
| 568 | per_2_emi = sdma->script_addrs->app_2_mcu_addr; |
| 569 | emi_2_per = sdma->script_addrs->mcu_2_app_addr; |
| 570 | break; |
| 571 | case IMX_DMATYPE_SSI_SP: |
| 572 | case IMX_DMATYPE_MMC: |
| 573 | case IMX_DMATYPE_SDHC: |
| 574 | case IMX_DMATYPE_CSPI_SP: |
| 575 | case IMX_DMATYPE_ESAI: |
| 576 | case IMX_DMATYPE_MSHC_SP: |
| 577 | per_2_emi = sdma->script_addrs->shp_2_mcu_addr; |
| 578 | emi_2_per = sdma->script_addrs->mcu_2_shp_addr; |
| 579 | break; |
| 580 | case IMX_DMATYPE_ASRC: |
| 581 | per_2_emi = sdma->script_addrs->asrc_2_mcu_addr; |
| 582 | emi_2_per = sdma->script_addrs->asrc_2_mcu_addr; |
| 583 | per_2_per = sdma->script_addrs->per_2_per_addr; |
| 584 | break; |
| 585 | case IMX_DMATYPE_MSHC: |
| 586 | per_2_emi = sdma->script_addrs->mshc_2_mcu_addr; |
| 587 | emi_2_per = sdma->script_addrs->mcu_2_mshc_addr; |
| 588 | break; |
| 589 | case IMX_DMATYPE_CCM: |
| 590 | per_2_emi = sdma->script_addrs->dptc_dvfs_addr; |
| 591 | break; |
| 592 | case IMX_DMATYPE_SPDIF: |
| 593 | per_2_emi = sdma->script_addrs->spdif_2_mcu_addr; |
| 594 | emi_2_per = sdma->script_addrs->mcu_2_spdif_addr; |
| 595 | break; |
| 596 | case IMX_DMATYPE_IPU_MEMORY: |
| 597 | emi_2_per = sdma->script_addrs->ext_mem_2_ipu_addr; |
| 598 | break; |
| 599 | default: |
| 600 | break; |
| 601 | } |
| 602 | |
| 603 | sdmac->pc_from_device = per_2_emi; |
| 604 | sdmac->pc_to_device = emi_2_per; |
| 605 | } |
| 606 | |
| 607 | static int sdma_load_context(struct sdma_channel *sdmac) |
| 608 | { |
| 609 | struct sdma_engine *sdma = sdmac->sdma; |
| 610 | int channel = sdmac->channel; |
| 611 | int load_address; |
| 612 | struct sdma_context_data *context = sdma->context; |
| 613 | struct sdma_buffer_descriptor *bd0 = sdma->channel[0].bd; |
| 614 | int ret; |
| 615 | |
| 616 | if (sdmac->direction == DMA_FROM_DEVICE) { |
| 617 | load_address = sdmac->pc_from_device; |
| 618 | } else { |
| 619 | load_address = sdmac->pc_to_device; |
| 620 | } |
| 621 | |
| 622 | if (load_address < 0) |
| 623 | return load_address; |
| 624 | |
| 625 | dev_dbg(sdma->dev, "load_address = %d\n", load_address); |
| 626 | dev_dbg(sdma->dev, "wml = 0x%08x\n", sdmac->watermark_level); |
| 627 | dev_dbg(sdma->dev, "shp_addr = 0x%08x\n", sdmac->shp_addr); |
| 628 | dev_dbg(sdma->dev, "per_addr = 0x%08x\n", sdmac->per_addr); |
| 629 | dev_dbg(sdma->dev, "event_mask0 = 0x%08x\n", sdmac->event_mask0); |
| 630 | dev_dbg(sdma->dev, "event_mask1 = 0x%08x\n", sdmac->event_mask1); |
| 631 | |
| 632 | memset(context, 0, sizeof(*context)); |
| 633 | context->channel_state.pc = load_address; |
| 634 | |
| 635 | /* Send by context the event mask,base address for peripheral |
| 636 | * and watermark level |
| 637 | */ |
| 638 | context->gReg[0] = sdmac->event_mask1; |
| 639 | context->gReg[1] = sdmac->event_mask0; |
| 640 | context->gReg[2] = sdmac->per_addr; |
| 641 | context->gReg[6] = sdmac->shp_addr; |
| 642 | context->gReg[7] = sdmac->watermark_level; |
| 643 | |
| 644 | bd0->mode.command = C0_SETDM; |
| 645 | bd0->mode.status = BD_DONE | BD_INTR | BD_WRAP | BD_EXTD; |
| 646 | bd0->mode.count = sizeof(*context) / 4; |
| 647 | bd0->buffer_addr = sdma->context_phys; |
| 648 | bd0->ext_buffer_addr = 2048 + (sizeof(*context) / 4) * channel; |
| 649 | |
| 650 | ret = sdma_run_channel(&sdma->channel[0]); |
| 651 | |
| 652 | return ret; |
| 653 | } |
| 654 | |
| 655 | static void sdma_disable_channel(struct sdma_channel *sdmac) |
| 656 | { |
| 657 | struct sdma_engine *sdma = sdmac->sdma; |
| 658 | int channel = sdmac->channel; |
| 659 | |
| 660 | __raw_writel(1 << channel, sdma->regs + SDMA_H_STATSTOP); |
| 661 | sdmac->status = DMA_ERROR; |
| 662 | } |
| 663 | |
| 664 | static int sdma_config_channel(struct sdma_channel *sdmac) |
| 665 | { |
| 666 | int ret; |
| 667 | |
| 668 | sdma_disable_channel(sdmac); |
| 669 | |
| 670 | sdmac->event_mask0 = 0; |
| 671 | sdmac->event_mask1 = 0; |
| 672 | sdmac->shp_addr = 0; |
| 673 | sdmac->per_addr = 0; |
| 674 | |
| 675 | if (sdmac->event_id0) { |
| 676 | if (sdmac->event_id0 > 32) |
| 677 | return -EINVAL; |
| 678 | sdma_event_enable(sdmac, sdmac->event_id0); |
| 679 | } |
| 680 | |
| 681 | switch (sdmac->peripheral_type) { |
| 682 | case IMX_DMATYPE_DSP: |
| 683 | sdma_config_ownership(sdmac, false, true, true); |
| 684 | break; |
| 685 | case IMX_DMATYPE_MEMORY: |
| 686 | sdma_config_ownership(sdmac, false, true, false); |
| 687 | break; |
| 688 | default: |
| 689 | sdma_config_ownership(sdmac, true, true, false); |
| 690 | break; |
| 691 | } |
| 692 | |
| 693 | sdma_get_pc(sdmac, sdmac->peripheral_type); |
| 694 | |
| 695 | if ((sdmac->peripheral_type != IMX_DMATYPE_MEMORY) && |
| 696 | (sdmac->peripheral_type != IMX_DMATYPE_DSP)) { |
| 697 | /* Handle multiple event channels differently */ |
| 698 | if (sdmac->event_id1) { |
| 699 | sdmac->event_mask1 = 1 << (sdmac->event_id1 % 32); |
| 700 | if (sdmac->event_id1 > 31) |
| 701 | sdmac->watermark_level |= 1 << 31; |
| 702 | sdmac->event_mask0 = 1 << (sdmac->event_id0 % 32); |
| 703 | if (sdmac->event_id0 > 31) |
| 704 | sdmac->watermark_level |= 1 << 30; |
| 705 | } else { |
| 706 | sdmac->event_mask0 = 1 << sdmac->event_id0; |
| 707 | sdmac->event_mask1 = 1 << (sdmac->event_id0 - 32); |
| 708 | } |
| 709 | /* Watermark Level */ |
| 710 | sdmac->watermark_level |= sdmac->watermark_level; |
| 711 | /* Address */ |
| 712 | sdmac->shp_addr = sdmac->per_address; |
| 713 | } else { |
| 714 | sdmac->watermark_level = 0; /* FIXME: M3_BASE_ADDRESS */ |
| 715 | } |
| 716 | |
| 717 | ret = sdma_load_context(sdmac); |
| 718 | |
| 719 | return ret; |
| 720 | } |
| 721 | |
| 722 | static int sdma_set_channel_priority(struct sdma_channel *sdmac, |
| 723 | unsigned int priority) |
| 724 | { |
| 725 | struct sdma_engine *sdma = sdmac->sdma; |
| 726 | int channel = sdmac->channel; |
| 727 | |
| 728 | if (priority < MXC_SDMA_MIN_PRIORITY |
| 729 | || priority > MXC_SDMA_MAX_PRIORITY) { |
| 730 | return -EINVAL; |
| 731 | } |
| 732 | |
| 733 | __raw_writel(priority, sdma->regs + SDMA_CHNPRI_0 + 4 * channel); |
| 734 | |
| 735 | return 0; |
| 736 | } |
| 737 | |
| 738 | static int sdma_request_channel(struct sdma_channel *sdmac) |
| 739 | { |
| 740 | struct sdma_engine *sdma = sdmac->sdma; |
| 741 | int channel = sdmac->channel; |
| 742 | int ret = -EBUSY; |
| 743 | |
| 744 | sdmac->bd = dma_alloc_coherent(NULL, PAGE_SIZE, &sdmac->bd_phys, GFP_KERNEL); |
| 745 | if (!sdmac->bd) { |
| 746 | ret = -ENOMEM; |
| 747 | goto out; |
| 748 | } |
| 749 | |
| 750 | memset(sdmac->bd, 0, PAGE_SIZE); |
| 751 | |
| 752 | sdma->channel_control[channel].base_bd_ptr = sdmac->bd_phys; |
| 753 | sdma->channel_control[channel].current_bd_ptr = sdmac->bd_phys; |
| 754 | |
| 755 | clk_enable(sdma->clk); |
| 756 | |
| 757 | sdma_set_channel_priority(sdmac, MXC_SDMA_DEFAULT_PRIORITY); |
| 758 | |
| 759 | init_completion(&sdmac->done); |
| 760 | |
| 761 | sdmac->buf_tail = 0; |
| 762 | |
| 763 | return 0; |
| 764 | out: |
| 765 | |
| 766 | return ret; |
| 767 | } |
| 768 | |
| 769 | static void sdma_enable_channel(struct sdma_engine *sdma, int channel) |
| 770 | { |
| 771 | __raw_writel(1 << channel, sdma->regs + SDMA_H_START); |
| 772 | } |
| 773 | |
Shawn Guo | d718f4e | 2011-01-17 22:39:24 +0800 | [diff] [blame] | 774 | static dma_cookie_t sdma_assign_cookie(struct sdma_channel *sdmac) |
Sascha Hauer | 1ec1e82 | 2010-09-30 13:56:34 +0000 | [diff] [blame] | 775 | { |
Shawn Guo | d718f4e | 2011-01-17 22:39:24 +0800 | [diff] [blame] | 776 | dma_cookie_t cookie = sdmac->chan.cookie; |
Sascha Hauer | 1ec1e82 | 2010-09-30 13:56:34 +0000 | [diff] [blame] | 777 | |
| 778 | if (++cookie < 0) |
| 779 | cookie = 1; |
| 780 | |
Shawn Guo | d718f4e | 2011-01-17 22:39:24 +0800 | [diff] [blame] | 781 | sdmac->chan.cookie = cookie; |
| 782 | sdmac->desc.cookie = cookie; |
Sascha Hauer | 1ec1e82 | 2010-09-30 13:56:34 +0000 | [diff] [blame] | 783 | |
| 784 | return cookie; |
| 785 | } |
| 786 | |
| 787 | static struct sdma_channel *to_sdma_chan(struct dma_chan *chan) |
| 788 | { |
| 789 | return container_of(chan, struct sdma_channel, chan); |
| 790 | } |
| 791 | |
| 792 | static dma_cookie_t sdma_tx_submit(struct dma_async_tx_descriptor *tx) |
| 793 | { |
| 794 | struct sdma_channel *sdmac = to_sdma_chan(tx->chan); |
| 795 | struct sdma_engine *sdma = sdmac->sdma; |
| 796 | dma_cookie_t cookie; |
| 797 | |
| 798 | spin_lock_irq(&sdmac->lock); |
| 799 | |
| 800 | cookie = sdma_assign_cookie(sdmac); |
| 801 | |
Sascha Hauer | 23889c6 | 2011-01-31 10:56:58 +0100 | [diff] [blame] | 802 | sdma_enable_channel(sdma, sdmac->channel); |
Sascha Hauer | 1ec1e82 | 2010-09-30 13:56:34 +0000 | [diff] [blame] | 803 | |
| 804 | spin_unlock_irq(&sdmac->lock); |
| 805 | |
| 806 | return cookie; |
| 807 | } |
| 808 | |
| 809 | static int sdma_alloc_chan_resources(struct dma_chan *chan) |
| 810 | { |
| 811 | struct sdma_channel *sdmac = to_sdma_chan(chan); |
| 812 | struct imx_dma_data *data = chan->private; |
| 813 | int prio, ret; |
| 814 | |
Sascha Hauer | 1ec1e82 | 2010-09-30 13:56:34 +0000 | [diff] [blame] | 815 | if (!data) |
| 816 | return -EINVAL; |
| 817 | |
| 818 | switch (data->priority) { |
| 819 | case DMA_PRIO_HIGH: |
| 820 | prio = 3; |
| 821 | break; |
| 822 | case DMA_PRIO_MEDIUM: |
| 823 | prio = 2; |
| 824 | break; |
| 825 | case DMA_PRIO_LOW: |
| 826 | default: |
| 827 | prio = 1; |
| 828 | break; |
| 829 | } |
| 830 | |
| 831 | sdmac->peripheral_type = data->peripheral_type; |
| 832 | sdmac->event_id0 = data->dma_request; |
| 833 | ret = sdma_set_channel_priority(sdmac, prio); |
| 834 | if (ret) |
| 835 | return ret; |
| 836 | |
| 837 | ret = sdma_request_channel(sdmac); |
| 838 | if (ret) |
| 839 | return ret; |
| 840 | |
| 841 | dma_async_tx_descriptor_init(&sdmac->desc, chan); |
| 842 | sdmac->desc.tx_submit = sdma_tx_submit; |
| 843 | /* txd.flags will be overwritten in prep funcs */ |
| 844 | sdmac->desc.flags = DMA_CTRL_ACK; |
| 845 | |
| 846 | return 0; |
| 847 | } |
| 848 | |
| 849 | static void sdma_free_chan_resources(struct dma_chan *chan) |
| 850 | { |
| 851 | struct sdma_channel *sdmac = to_sdma_chan(chan); |
| 852 | struct sdma_engine *sdma = sdmac->sdma; |
| 853 | |
| 854 | sdma_disable_channel(sdmac); |
| 855 | |
| 856 | if (sdmac->event_id0) |
| 857 | sdma_event_disable(sdmac, sdmac->event_id0); |
| 858 | if (sdmac->event_id1) |
| 859 | sdma_event_disable(sdmac, sdmac->event_id1); |
| 860 | |
| 861 | sdmac->event_id0 = 0; |
| 862 | sdmac->event_id1 = 0; |
| 863 | |
| 864 | sdma_set_channel_priority(sdmac, 0); |
| 865 | |
| 866 | dma_free_coherent(NULL, PAGE_SIZE, sdmac->bd, sdmac->bd_phys); |
| 867 | |
| 868 | clk_disable(sdma->clk); |
| 869 | } |
| 870 | |
| 871 | static struct dma_async_tx_descriptor *sdma_prep_slave_sg( |
| 872 | struct dma_chan *chan, struct scatterlist *sgl, |
| 873 | unsigned int sg_len, enum dma_data_direction direction, |
| 874 | unsigned long flags) |
| 875 | { |
| 876 | struct sdma_channel *sdmac = to_sdma_chan(chan); |
| 877 | struct sdma_engine *sdma = sdmac->sdma; |
| 878 | int ret, i, count; |
Sascha Hauer | 23889c6 | 2011-01-31 10:56:58 +0100 | [diff] [blame] | 879 | int channel = sdmac->channel; |
Sascha Hauer | 1ec1e82 | 2010-09-30 13:56:34 +0000 | [diff] [blame] | 880 | struct scatterlist *sg; |
| 881 | |
| 882 | if (sdmac->status == DMA_IN_PROGRESS) |
| 883 | return NULL; |
| 884 | sdmac->status = DMA_IN_PROGRESS; |
| 885 | |
| 886 | sdmac->flags = 0; |
| 887 | |
| 888 | dev_dbg(sdma->dev, "setting up %d entries for channel %d.\n", |
| 889 | sg_len, channel); |
| 890 | |
| 891 | sdmac->direction = direction; |
| 892 | ret = sdma_load_context(sdmac); |
| 893 | if (ret) |
| 894 | goto err_out; |
| 895 | |
| 896 | if (sg_len > NUM_BD) { |
| 897 | dev_err(sdma->dev, "SDMA channel %d: maximum number of sg exceeded: %d > %d\n", |
| 898 | channel, sg_len, NUM_BD); |
| 899 | ret = -EINVAL; |
| 900 | goto err_out; |
| 901 | } |
| 902 | |
| 903 | for_each_sg(sgl, sg, sg_len, i) { |
| 904 | struct sdma_buffer_descriptor *bd = &sdmac->bd[i]; |
| 905 | int param; |
| 906 | |
Anatolij Gustschin | d2f5c27 | 2010-11-22 18:35:18 +0100 | [diff] [blame] | 907 | bd->buffer_addr = sg->dma_address; |
Sascha Hauer | 1ec1e82 | 2010-09-30 13:56:34 +0000 | [diff] [blame] | 908 | |
| 909 | count = sg->length; |
| 910 | |
| 911 | if (count > 0xffff) { |
| 912 | dev_err(sdma->dev, "SDMA channel %d: maximum bytes for sg entry exceeded: %d > %d\n", |
| 913 | channel, count, 0xffff); |
| 914 | ret = -EINVAL; |
| 915 | goto err_out; |
| 916 | } |
| 917 | |
| 918 | bd->mode.count = count; |
| 919 | |
| 920 | if (sdmac->word_size > DMA_SLAVE_BUSWIDTH_4_BYTES) { |
| 921 | ret = -EINVAL; |
| 922 | goto err_out; |
| 923 | } |
Sascha Hauer | 1fa81c2 | 2011-01-12 13:02:28 +0100 | [diff] [blame] | 924 | |
| 925 | switch (sdmac->word_size) { |
| 926 | case DMA_SLAVE_BUSWIDTH_4_BYTES: |
Sascha Hauer | 1ec1e82 | 2010-09-30 13:56:34 +0000 | [diff] [blame] | 927 | bd->mode.command = 0; |
Sascha Hauer | 1fa81c2 | 2011-01-12 13:02:28 +0100 | [diff] [blame] | 928 | if (count & 3 || sg->dma_address & 3) |
| 929 | return NULL; |
| 930 | break; |
| 931 | case DMA_SLAVE_BUSWIDTH_2_BYTES: |
| 932 | bd->mode.command = 2; |
| 933 | if (count & 1 || sg->dma_address & 1) |
| 934 | return NULL; |
| 935 | break; |
| 936 | case DMA_SLAVE_BUSWIDTH_1_BYTE: |
| 937 | bd->mode.command = 1; |
| 938 | break; |
| 939 | default: |
| 940 | return NULL; |
| 941 | } |
Sascha Hauer | 1ec1e82 | 2010-09-30 13:56:34 +0000 | [diff] [blame] | 942 | |
| 943 | param = BD_DONE | BD_EXTD | BD_CONT; |
| 944 | |
Shawn Guo | 341b941 | 2011-01-20 05:50:39 +0800 | [diff] [blame] | 945 | if (i + 1 == sg_len) { |
Sascha Hauer | 1ec1e82 | 2010-09-30 13:56:34 +0000 | [diff] [blame] | 946 | param |= BD_INTR; |
Shawn Guo | 341b941 | 2011-01-20 05:50:39 +0800 | [diff] [blame] | 947 | param |= BD_LAST; |
| 948 | param &= ~BD_CONT; |
Sascha Hauer | 1ec1e82 | 2010-09-30 13:56:34 +0000 | [diff] [blame] | 949 | } |
| 950 | |
Sascha Hauer | 1ec1e82 | 2010-09-30 13:56:34 +0000 | [diff] [blame] | 951 | dev_dbg(sdma->dev, "entry %d: count: %d dma: 0x%08x %s%s\n", |
| 952 | i, count, sg->dma_address, |
| 953 | param & BD_WRAP ? "wrap" : "", |
| 954 | param & BD_INTR ? " intr" : ""); |
| 955 | |
| 956 | bd->mode.status = param; |
| 957 | } |
| 958 | |
| 959 | sdmac->num_bd = sg_len; |
| 960 | sdma->channel_control[channel].current_bd_ptr = sdmac->bd_phys; |
| 961 | |
| 962 | return &sdmac->desc; |
| 963 | err_out: |
Shawn Guo | 4b2ce9d | 2011-01-20 05:50:36 +0800 | [diff] [blame] | 964 | sdmac->status = DMA_ERROR; |
Sascha Hauer | 1ec1e82 | 2010-09-30 13:56:34 +0000 | [diff] [blame] | 965 | return NULL; |
| 966 | } |
| 967 | |
| 968 | static struct dma_async_tx_descriptor *sdma_prep_dma_cyclic( |
| 969 | struct dma_chan *chan, dma_addr_t dma_addr, size_t buf_len, |
| 970 | size_t period_len, enum dma_data_direction direction) |
| 971 | { |
| 972 | struct sdma_channel *sdmac = to_sdma_chan(chan); |
| 973 | struct sdma_engine *sdma = sdmac->sdma; |
| 974 | int num_periods = buf_len / period_len; |
Sascha Hauer | 23889c6 | 2011-01-31 10:56:58 +0100 | [diff] [blame] | 975 | int channel = sdmac->channel; |
Sascha Hauer | 1ec1e82 | 2010-09-30 13:56:34 +0000 | [diff] [blame] | 976 | int ret, i = 0, buf = 0; |
| 977 | |
| 978 | dev_dbg(sdma->dev, "%s channel: %d\n", __func__, channel); |
| 979 | |
| 980 | if (sdmac->status == DMA_IN_PROGRESS) |
| 981 | return NULL; |
| 982 | |
| 983 | sdmac->status = DMA_IN_PROGRESS; |
| 984 | |
| 985 | sdmac->flags |= IMX_DMA_SG_LOOP; |
| 986 | sdmac->direction = direction; |
| 987 | ret = sdma_load_context(sdmac); |
| 988 | if (ret) |
| 989 | goto err_out; |
| 990 | |
| 991 | if (num_periods > NUM_BD) { |
| 992 | dev_err(sdma->dev, "SDMA channel %d: maximum number of sg exceeded: %d > %d\n", |
| 993 | channel, num_periods, NUM_BD); |
| 994 | goto err_out; |
| 995 | } |
| 996 | |
| 997 | if (period_len > 0xffff) { |
| 998 | dev_err(sdma->dev, "SDMA channel %d: maximum period size exceeded: %d > %d\n", |
| 999 | channel, period_len, 0xffff); |
| 1000 | goto err_out; |
| 1001 | } |
| 1002 | |
| 1003 | while (buf < buf_len) { |
| 1004 | struct sdma_buffer_descriptor *bd = &sdmac->bd[i]; |
| 1005 | int param; |
| 1006 | |
| 1007 | bd->buffer_addr = dma_addr; |
| 1008 | |
| 1009 | bd->mode.count = period_len; |
| 1010 | |
| 1011 | if (sdmac->word_size > DMA_SLAVE_BUSWIDTH_4_BYTES) |
| 1012 | goto err_out; |
| 1013 | if (sdmac->word_size == DMA_SLAVE_BUSWIDTH_4_BYTES) |
| 1014 | bd->mode.command = 0; |
| 1015 | else |
| 1016 | bd->mode.command = sdmac->word_size; |
| 1017 | |
| 1018 | param = BD_DONE | BD_EXTD | BD_CONT | BD_INTR; |
| 1019 | if (i + 1 == num_periods) |
| 1020 | param |= BD_WRAP; |
| 1021 | |
| 1022 | dev_dbg(sdma->dev, "entry %d: count: %d dma: 0x%08x %s%s\n", |
| 1023 | i, period_len, dma_addr, |
| 1024 | param & BD_WRAP ? "wrap" : "", |
| 1025 | param & BD_INTR ? " intr" : ""); |
| 1026 | |
| 1027 | bd->mode.status = param; |
| 1028 | |
| 1029 | dma_addr += period_len; |
| 1030 | buf += period_len; |
| 1031 | |
| 1032 | i++; |
| 1033 | } |
| 1034 | |
| 1035 | sdmac->num_bd = num_periods; |
| 1036 | sdma->channel_control[channel].current_bd_ptr = sdmac->bd_phys; |
| 1037 | |
| 1038 | return &sdmac->desc; |
| 1039 | err_out: |
| 1040 | sdmac->status = DMA_ERROR; |
| 1041 | return NULL; |
| 1042 | } |
| 1043 | |
| 1044 | static int sdma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, |
| 1045 | unsigned long arg) |
| 1046 | { |
| 1047 | struct sdma_channel *sdmac = to_sdma_chan(chan); |
| 1048 | struct dma_slave_config *dmaengine_cfg = (void *)arg; |
| 1049 | |
| 1050 | switch (cmd) { |
| 1051 | case DMA_TERMINATE_ALL: |
| 1052 | sdma_disable_channel(sdmac); |
| 1053 | return 0; |
| 1054 | case DMA_SLAVE_CONFIG: |
| 1055 | if (dmaengine_cfg->direction == DMA_FROM_DEVICE) { |
| 1056 | sdmac->per_address = dmaengine_cfg->src_addr; |
| 1057 | sdmac->watermark_level = dmaengine_cfg->src_maxburst; |
| 1058 | sdmac->word_size = dmaengine_cfg->src_addr_width; |
| 1059 | } else { |
| 1060 | sdmac->per_address = dmaengine_cfg->dst_addr; |
| 1061 | sdmac->watermark_level = dmaengine_cfg->dst_maxburst; |
| 1062 | sdmac->word_size = dmaengine_cfg->dst_addr_width; |
| 1063 | } |
| 1064 | return sdma_config_channel(sdmac); |
| 1065 | default: |
| 1066 | return -ENOSYS; |
| 1067 | } |
| 1068 | |
| 1069 | return -EINVAL; |
| 1070 | } |
| 1071 | |
| 1072 | static enum dma_status sdma_tx_status(struct dma_chan *chan, |
| 1073 | dma_cookie_t cookie, |
| 1074 | struct dma_tx_state *txstate) |
| 1075 | { |
| 1076 | struct sdma_channel *sdmac = to_sdma_chan(chan); |
| 1077 | dma_cookie_t last_used; |
Sascha Hauer | 1ec1e82 | 2010-09-30 13:56:34 +0000 | [diff] [blame] | 1078 | |
| 1079 | last_used = chan->cookie; |
| 1080 | |
Sascha Hauer | 1ec1e82 | 2010-09-30 13:56:34 +0000 | [diff] [blame] | 1081 | dma_set_tx_state(txstate, sdmac->last_completed, last_used, 0); |
| 1082 | |
Shawn Guo | 8a96591 | 2011-01-20 05:50:37 +0800 | [diff] [blame] | 1083 | return sdmac->status; |
Sascha Hauer | 1ec1e82 | 2010-09-30 13:56:34 +0000 | [diff] [blame] | 1084 | } |
| 1085 | |
| 1086 | static void sdma_issue_pending(struct dma_chan *chan) |
| 1087 | { |
| 1088 | /* |
| 1089 | * Nothing to do. We only have a single descriptor |
| 1090 | */ |
| 1091 | } |
| 1092 | |
Sascha Hauer | 5b28aa3 | 2010-10-06 15:41:15 +0200 | [diff] [blame] | 1093 | #define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V1 34 |
| 1094 | |
| 1095 | static void sdma_add_scripts(struct sdma_engine *sdma, |
| 1096 | const struct sdma_script_start_addrs *addr) |
| 1097 | { |
| 1098 | s32 *addr_arr = (u32 *)addr; |
| 1099 | s32 *saddr_arr = (u32 *)sdma->script_addrs; |
| 1100 | int i; |
| 1101 | |
| 1102 | for (i = 0; i < SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V1; i++) |
| 1103 | if (addr_arr[i] > 0) |
| 1104 | saddr_arr[i] = addr_arr[i]; |
| 1105 | } |
| 1106 | |
| 1107 | static int __init sdma_get_firmware(struct sdma_engine *sdma, |
| 1108 | const char *cpu_name, int to_version) |
| 1109 | { |
| 1110 | const struct firmware *fw; |
| 1111 | char *fwname; |
| 1112 | const struct sdma_firmware_header *header; |
| 1113 | int ret; |
| 1114 | const struct sdma_script_start_addrs *addr; |
| 1115 | unsigned short *ram_code; |
| 1116 | |
| 1117 | fwname = kasprintf(GFP_KERNEL, "sdma-%s-to%d.bin", cpu_name, to_version); |
| 1118 | if (!fwname) |
| 1119 | return -ENOMEM; |
| 1120 | |
| 1121 | ret = request_firmware(&fw, fwname, sdma->dev); |
| 1122 | if (ret) { |
| 1123 | kfree(fwname); |
| 1124 | return ret; |
| 1125 | } |
| 1126 | kfree(fwname); |
| 1127 | |
| 1128 | if (fw->size < sizeof(*header)) |
| 1129 | goto err_firmware; |
| 1130 | |
| 1131 | header = (struct sdma_firmware_header *)fw->data; |
| 1132 | |
| 1133 | if (header->magic != SDMA_FIRMWARE_MAGIC) |
| 1134 | goto err_firmware; |
| 1135 | if (header->ram_code_start + header->ram_code_size > fw->size) |
| 1136 | goto err_firmware; |
| 1137 | |
| 1138 | addr = (void *)header + header->script_addrs_start; |
| 1139 | ram_code = (void *)header + header->ram_code_start; |
| 1140 | |
| 1141 | clk_enable(sdma->clk); |
| 1142 | /* download the RAM image for SDMA */ |
| 1143 | sdma_load_script(sdma, ram_code, |
| 1144 | header->ram_code_size, |
Sascha Hauer | 6866fd3 | 2011-01-12 11:18:14 +0100 | [diff] [blame] | 1145 | addr->ram_code_start_addr); |
Sascha Hauer | 5b28aa3 | 2010-10-06 15:41:15 +0200 | [diff] [blame] | 1146 | clk_disable(sdma->clk); |
| 1147 | |
| 1148 | sdma_add_scripts(sdma, addr); |
| 1149 | |
| 1150 | dev_info(sdma->dev, "loaded firmware %d.%d\n", |
| 1151 | header->version_major, |
| 1152 | header->version_minor); |
| 1153 | |
| 1154 | err_firmware: |
| 1155 | release_firmware(fw); |
| 1156 | |
| 1157 | return ret; |
| 1158 | } |
| 1159 | |
| 1160 | static int __init sdma_init(struct sdma_engine *sdma) |
Sascha Hauer | 1ec1e82 | 2010-09-30 13:56:34 +0000 | [diff] [blame] | 1161 | { |
| 1162 | int i, ret; |
| 1163 | dma_addr_t ccb_phys; |
| 1164 | |
| 1165 | switch (sdma->version) { |
| 1166 | case 1: |
| 1167 | sdma->num_events = 32; |
| 1168 | break; |
| 1169 | case 2: |
| 1170 | sdma->num_events = 48; |
| 1171 | break; |
| 1172 | default: |
| 1173 | dev_err(sdma->dev, "Unknown version %d. aborting\n", sdma->version); |
| 1174 | return -ENODEV; |
| 1175 | } |
| 1176 | |
| 1177 | clk_enable(sdma->clk); |
| 1178 | |
| 1179 | /* Be sure SDMA has not started yet */ |
| 1180 | __raw_writel(0, sdma->regs + SDMA_H_C0PTR); |
| 1181 | |
| 1182 | sdma->channel_control = dma_alloc_coherent(NULL, |
| 1183 | MAX_DMA_CHANNELS * sizeof (struct sdma_channel_control) + |
| 1184 | sizeof(struct sdma_context_data), |
| 1185 | &ccb_phys, GFP_KERNEL); |
| 1186 | |
| 1187 | if (!sdma->channel_control) { |
| 1188 | ret = -ENOMEM; |
| 1189 | goto err_dma_alloc; |
| 1190 | } |
| 1191 | |
| 1192 | sdma->context = (void *)sdma->channel_control + |
| 1193 | MAX_DMA_CHANNELS * sizeof (struct sdma_channel_control); |
| 1194 | sdma->context_phys = ccb_phys + |
| 1195 | MAX_DMA_CHANNELS * sizeof (struct sdma_channel_control); |
| 1196 | |
| 1197 | /* Zero-out the CCB structures array just allocated */ |
| 1198 | memset(sdma->channel_control, 0, |
| 1199 | MAX_DMA_CHANNELS * sizeof (struct sdma_channel_control)); |
| 1200 | |
| 1201 | /* disable all channels */ |
| 1202 | for (i = 0; i < sdma->num_events; i++) |
| 1203 | __raw_writel(0, sdma->regs + chnenbl_ofs(sdma, i)); |
| 1204 | |
| 1205 | /* All channels have priority 0 */ |
| 1206 | for (i = 0; i < MAX_DMA_CHANNELS; i++) |
| 1207 | __raw_writel(0, sdma->regs + SDMA_CHNPRI_0 + i * 4); |
| 1208 | |
| 1209 | ret = sdma_request_channel(&sdma->channel[0]); |
| 1210 | if (ret) |
| 1211 | goto err_dma_alloc; |
| 1212 | |
| 1213 | sdma_config_ownership(&sdma->channel[0], false, true, false); |
| 1214 | |
| 1215 | /* Set Command Channel (Channel Zero) */ |
| 1216 | __raw_writel(0x4050, sdma->regs + SDMA_CHN0ADDR); |
| 1217 | |
| 1218 | /* Set bits of CONFIG register but with static context switching */ |
| 1219 | /* FIXME: Check whether to set ACR bit depending on clock ratios */ |
| 1220 | __raw_writel(0, sdma->regs + SDMA_H_CONFIG); |
| 1221 | |
| 1222 | __raw_writel(ccb_phys, sdma->regs + SDMA_H_C0PTR); |
| 1223 | |
Sascha Hauer | 1ec1e82 | 2010-09-30 13:56:34 +0000 | [diff] [blame] | 1224 | /* Set bits of CONFIG register with given context switching mode */ |
| 1225 | __raw_writel(SDMA_H_CONFIG_CSM, sdma->regs + SDMA_H_CONFIG); |
| 1226 | |
| 1227 | /* Initializes channel's priorities */ |
| 1228 | sdma_set_channel_priority(&sdma->channel[0], 7); |
| 1229 | |
| 1230 | clk_disable(sdma->clk); |
| 1231 | |
| 1232 | return 0; |
| 1233 | |
| 1234 | err_dma_alloc: |
| 1235 | clk_disable(sdma->clk); |
| 1236 | dev_err(sdma->dev, "initialisation failed with %d\n", ret); |
| 1237 | return ret; |
| 1238 | } |
| 1239 | |
| 1240 | static int __init sdma_probe(struct platform_device *pdev) |
| 1241 | { |
| 1242 | int ret; |
Sascha Hauer | 1ec1e82 | 2010-09-30 13:56:34 +0000 | [diff] [blame] | 1243 | int irq; |
Sascha Hauer | 1ec1e82 | 2010-09-30 13:56:34 +0000 | [diff] [blame] | 1244 | struct resource *iores; |
| 1245 | struct sdma_platform_data *pdata = pdev->dev.platform_data; |
Sascha Hauer | 1ec1e82 | 2010-09-30 13:56:34 +0000 | [diff] [blame] | 1246 | int i; |
Sascha Hauer | 1ec1e82 | 2010-09-30 13:56:34 +0000 | [diff] [blame] | 1247 | struct sdma_engine *sdma; |
| 1248 | |
| 1249 | sdma = kzalloc(sizeof(*sdma), GFP_KERNEL); |
| 1250 | if (!sdma) |
| 1251 | return -ENOMEM; |
| 1252 | |
| 1253 | sdma->dev = &pdev->dev; |
| 1254 | |
| 1255 | iores = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| 1256 | irq = platform_get_irq(pdev, 0); |
| 1257 | if (!iores || irq < 0 || !pdata) { |
| 1258 | ret = -EINVAL; |
| 1259 | goto err_irq; |
| 1260 | } |
| 1261 | |
| 1262 | if (!request_mem_region(iores->start, resource_size(iores), pdev->name)) { |
| 1263 | ret = -EBUSY; |
| 1264 | goto err_request_region; |
| 1265 | } |
| 1266 | |
| 1267 | sdma->clk = clk_get(&pdev->dev, NULL); |
| 1268 | if (IS_ERR(sdma->clk)) { |
| 1269 | ret = PTR_ERR(sdma->clk); |
| 1270 | goto err_clk; |
| 1271 | } |
| 1272 | |
| 1273 | sdma->regs = ioremap(iores->start, resource_size(iores)); |
| 1274 | if (!sdma->regs) { |
| 1275 | ret = -ENOMEM; |
| 1276 | goto err_ioremap; |
| 1277 | } |
| 1278 | |
| 1279 | ret = request_irq(irq, sdma_int_handler, 0, "sdma", sdma); |
| 1280 | if (ret) |
| 1281 | goto err_request_irq; |
| 1282 | |
Sascha Hauer | 5b28aa3 | 2010-10-06 15:41:15 +0200 | [diff] [blame] | 1283 | sdma->script_addrs = kzalloc(sizeof(*sdma->script_addrs), GFP_KERNEL); |
Sascha Hauer | 1ec1e82 | 2010-09-30 13:56:34 +0000 | [diff] [blame] | 1284 | if (!sdma->script_addrs) |
Sascha Hauer | 5b28aa3 | 2010-10-06 15:41:15 +0200 | [diff] [blame] | 1285 | goto err_alloc; |
Sascha Hauer | 1ec1e82 | 2010-09-30 13:56:34 +0000 | [diff] [blame] | 1286 | |
| 1287 | sdma->version = pdata->sdma_version; |
| 1288 | |
Sascha Hauer | 7214a8b | 2011-01-31 10:21:35 +0100 | [diff] [blame] | 1289 | dma_cap_set(DMA_SLAVE, sdma->dma_device.cap_mask); |
| 1290 | dma_cap_set(DMA_CYCLIC, sdma->dma_device.cap_mask); |
| 1291 | |
Sascha Hauer | 1ec1e82 | 2010-09-30 13:56:34 +0000 | [diff] [blame] | 1292 | INIT_LIST_HEAD(&sdma->dma_device.channels); |
| 1293 | /* Initialize channel parameters */ |
| 1294 | for (i = 0; i < MAX_DMA_CHANNELS; i++) { |
| 1295 | struct sdma_channel *sdmac = &sdma->channel[i]; |
| 1296 | |
| 1297 | sdmac->sdma = sdma; |
| 1298 | spin_lock_init(&sdmac->lock); |
| 1299 | |
Sascha Hauer | 1ec1e82 | 2010-09-30 13:56:34 +0000 | [diff] [blame] | 1300 | sdmac->chan.device = &sdma->dma_device; |
Sascha Hauer | 1ec1e82 | 2010-09-30 13:56:34 +0000 | [diff] [blame] | 1301 | sdmac->channel = i; |
| 1302 | |
Sascha Hauer | 23889c6 | 2011-01-31 10:56:58 +0100 | [diff] [blame] | 1303 | /* |
| 1304 | * Add the channel to the DMAC list. Do not add channel 0 though |
| 1305 | * because we need it internally in the SDMA driver. This also means |
| 1306 | * that channel 0 in dmaengine counting matches sdma channel 1. |
| 1307 | */ |
| 1308 | if (i) |
| 1309 | list_add_tail(&sdmac->chan.device_node, |
| 1310 | &sdma->dma_device.channels); |
Sascha Hauer | 1ec1e82 | 2010-09-30 13:56:34 +0000 | [diff] [blame] | 1311 | } |
| 1312 | |
Sascha Hauer | 5b28aa3 | 2010-10-06 15:41:15 +0200 | [diff] [blame] | 1313 | ret = sdma_init(sdma); |
Sascha Hauer | 1ec1e82 | 2010-09-30 13:56:34 +0000 | [diff] [blame] | 1314 | if (ret) |
| 1315 | goto err_init; |
| 1316 | |
Sascha Hauer | 5b28aa3 | 2010-10-06 15:41:15 +0200 | [diff] [blame] | 1317 | if (pdata->script_addrs) |
| 1318 | sdma_add_scripts(sdma, pdata->script_addrs); |
| 1319 | |
| 1320 | sdma_get_firmware(sdma, pdata->cpu_name, pdata->to_version); |
| 1321 | |
Sascha Hauer | 1ec1e82 | 2010-09-30 13:56:34 +0000 | [diff] [blame] | 1322 | sdma->dma_device.dev = &pdev->dev; |
| 1323 | |
| 1324 | sdma->dma_device.device_alloc_chan_resources = sdma_alloc_chan_resources; |
| 1325 | sdma->dma_device.device_free_chan_resources = sdma_free_chan_resources; |
| 1326 | sdma->dma_device.device_tx_status = sdma_tx_status; |
| 1327 | sdma->dma_device.device_prep_slave_sg = sdma_prep_slave_sg; |
| 1328 | sdma->dma_device.device_prep_dma_cyclic = sdma_prep_dma_cyclic; |
| 1329 | sdma->dma_device.device_control = sdma_control; |
| 1330 | sdma->dma_device.device_issue_pending = sdma_issue_pending; |
Sascha Hauer | b9b3f82 | 2011-01-12 12:12:31 +0100 | [diff] [blame] | 1331 | sdma->dma_device.dev->dma_parms = &sdma->dma_parms; |
| 1332 | dma_set_max_seg_size(sdma->dma_device.dev, 65535); |
Sascha Hauer | 1ec1e82 | 2010-09-30 13:56:34 +0000 | [diff] [blame] | 1333 | |
| 1334 | ret = dma_async_device_register(&sdma->dma_device); |
| 1335 | if (ret) { |
| 1336 | dev_err(&pdev->dev, "unable to register\n"); |
| 1337 | goto err_init; |
| 1338 | } |
| 1339 | |
Sascha Hauer | 5b28aa3 | 2010-10-06 15:41:15 +0200 | [diff] [blame] | 1340 | dev_info(sdma->dev, "initialized\n"); |
Sascha Hauer | 1ec1e82 | 2010-09-30 13:56:34 +0000 | [diff] [blame] | 1341 | |
| 1342 | return 0; |
| 1343 | |
| 1344 | err_init: |
| 1345 | kfree(sdma->script_addrs); |
Sascha Hauer | 5b28aa3 | 2010-10-06 15:41:15 +0200 | [diff] [blame] | 1346 | err_alloc: |
Sascha Hauer | 1ec1e82 | 2010-09-30 13:56:34 +0000 | [diff] [blame] | 1347 | free_irq(irq, sdma); |
| 1348 | err_request_irq: |
| 1349 | iounmap(sdma->regs); |
| 1350 | err_ioremap: |
| 1351 | clk_put(sdma->clk); |
| 1352 | err_clk: |
| 1353 | release_mem_region(iores->start, resource_size(iores)); |
| 1354 | err_request_region: |
| 1355 | err_irq: |
| 1356 | kfree(sdma); |
Shawn Guo | 939fd4f | 2011-01-19 19:13:06 +0800 | [diff] [blame] | 1357 | return ret; |
Sascha Hauer | 1ec1e82 | 2010-09-30 13:56:34 +0000 | [diff] [blame] | 1358 | } |
| 1359 | |
| 1360 | static int __exit sdma_remove(struct platform_device *pdev) |
| 1361 | { |
| 1362 | return -EBUSY; |
| 1363 | } |
| 1364 | |
| 1365 | static struct platform_driver sdma_driver = { |
| 1366 | .driver = { |
| 1367 | .name = "imx-sdma", |
| 1368 | }, |
| 1369 | .remove = __exit_p(sdma_remove), |
| 1370 | }; |
| 1371 | |
| 1372 | static int __init sdma_module_init(void) |
| 1373 | { |
| 1374 | return platform_driver_probe(&sdma_driver, sdma_probe); |
| 1375 | } |
Sascha Hauer | c989a7f | 2010-12-06 11:09:57 +0100 | [diff] [blame] | 1376 | module_init(sdma_module_init); |
Sascha Hauer | 1ec1e82 | 2010-09-30 13:56:34 +0000 | [diff] [blame] | 1377 | |
| 1378 | MODULE_AUTHOR("Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>"); |
| 1379 | MODULE_DESCRIPTION("i.MX SDMA driver"); |
| 1380 | MODULE_LICENSE("GPL"); |