blob: 3f32d4674371b4a14f6546ff24369a8baf96fbc0 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * sound/sgalaxy.c
3 *
4 * Low level driver for Aztech Sound Galaxy cards.
5 * Copyright 1998 Artur Skawina <skawina@geocities.com>
6 *
7 * Supported cards:
8 * Aztech Sound Galaxy Waverider Pro 32 - 3D
9 * Aztech Sound Galaxy Washington 16
10 *
11 * Based on cs4232.c by Hannu Savolainen and Alan Cox.
12 *
13 *
14 * Copyright (C) by Hannu Savolainen 1993-1997
15 *
16 * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
17 * Version 2 (June 1991). See the "COPYING" file distributed with this software
18 * for more info.
19 *
20 * Changes:
21 * 11-10-2000 Bartlomiej Zolnierkiewicz <bkz@linux-ide.org>
22 * Added __init to sb_rst() and sb_cmd()
23 */
24
25#include <linux/init.h>
26#include <linux/module.h>
27
28#include "sound_config.h"
29#include "ad1848.h"
30
31static void sleep( unsigned howlong )
32{
33 current->state = TASK_INTERRUPTIBLE;
34 schedule_timeout(howlong);
35}
36
37#define DPORT 0x80
38
39/* Sound Blaster regs */
40
41#define SBDSP_RESET 0x6
42#define SBDSP_READ 0xA
43#define SBDSP_COMMAND 0xC
44#define SBDSP_STATUS SBDSP_COMMAND
45#define SBDSP_DATA_AVAIL 0xE
46
47static int __init sb_rst(int base)
48{
49 int i;
50
51 outb( 1, base+SBDSP_RESET ); /* reset the DSP */
52 outb( 0, base+SBDSP_RESET );
53
54 for ( i=0; i<500; i++ ) /* delay */
55 inb(DPORT);
56
57 for ( i=0; i<100000; i++ )
58 {
59 if ( inb( base+SBDSP_DATA_AVAIL )&0x80 )
60 break;
61 }
62
63 if ( inb( base+SBDSP_READ )!=0xAA )
64 return 0;
65
66 return 1;
67}
68
69static int __init sb_cmd( int base, unsigned char val )
70{
71 int i;
72
73 for ( i=100000; i; i-- )
74 {
75 if ( (inb( base+SBDSP_STATUS )&0x80)==0 )
76 {
77 outb( val, base+SBDSP_COMMAND );
78 break;
79 }
80 }
81 return i; /* i>0 == success */
82}
83
84
85#define ai_sgbase driver_use_1
86
87static int __init probe_sgalaxy( struct address_info *ai )
88{
89 struct resource *ports;
90 int n;
91
92 if (!request_region(ai->io_base, 4, "WSS config")) {
93 printk(KERN_ERR "sgalaxy: WSS IO port 0x%03x not available\n", ai->io_base);
94 return 0;
95 }
96
97 ports = request_region(ai->io_base + 4, 4, "ad1848");
98 if (!ports) {
99 printk(KERN_ERR "sgalaxy: WSS IO port 0x%03x not available\n", ai->io_base);
100 release_region(ai->io_base, 4);
101 return 0;
102 }
103
104 if (!request_region( ai->ai_sgbase, 0x10, "SoundGalaxy SB")) {
105 printk(KERN_ERR "sgalaxy: SB IO port 0x%03x not available\n", ai->ai_sgbase);
106 release_region(ai->io_base + 4, 4);
107 release_region(ai->io_base, 4);
108 return 0;
109 }
110
111 if (ad1848_detect(ports, NULL, ai->osp))
112 goto out; /* The card is already active, check irq etc... */
113
114 /* switch to MSS/WSS mode */
115
116 sb_rst( ai->ai_sgbase );
117
118 sb_cmd( ai->ai_sgbase, 9 );
119 sb_cmd( ai->ai_sgbase, 0 );
120
121 sleep( HZ/10 );
122
123out:
124 if (!probe_ms_sound(ai, ports)) {
125 release_region(ai->io_base + 4, 4);
126 release_region(ai->io_base, 4);
127 release_region(ai->ai_sgbase, 0x10);
128 return 0;
129 }
130
131 attach_ms_sound(ai, ports, THIS_MODULE);
132 n=ai->slots[0];
133
134 if (n!=-1 && audio_devs[n]->mixer_dev != -1 ) {
135 AD1848_REROUTE( SOUND_MIXER_LINE1, SOUND_MIXER_LINE ); /* Line-in */
136 AD1848_REROUTE( SOUND_MIXER_LINE2, SOUND_MIXER_SYNTH ); /* FM+Wavetable*/
137 AD1848_REROUTE( SOUND_MIXER_LINE3, SOUND_MIXER_CD ); /* CD */
138 }
139 return 1;
140}
141
142static void __exit unload_sgalaxy( struct address_info *ai )
143{
144 unload_ms_sound( ai );
145 release_region( ai->ai_sgbase, 0x10 );
146}
147
148static struct address_info cfg;
149
150static int __initdata io = -1;
151static int __initdata irq = -1;
152static int __initdata dma = -1;
153static int __initdata dma2 = -1;
154static int __initdata sgbase = -1;
155
156module_param(io, int, 0);
157module_param(irq, int, 0);
158module_param(dma, int, 0);
159module_param(dma2, int, 0);
160module_param(sgbase, int, 0);
161
162static int __init init_sgalaxy(void)
163{
164 cfg.io_base = io;
165 cfg.irq = irq;
166 cfg.dma = dma;
167 cfg.dma2 = dma2;
168 cfg.ai_sgbase = sgbase;
169
170 if (cfg.io_base == -1 || cfg.irq == -1 || cfg.dma == -1 || cfg.ai_sgbase == -1 ) {
171 printk(KERN_ERR "sgalaxy: io, irq, dma and sgbase must be set.\n");
172 return -EINVAL;
173 }
174
175 if ( probe_sgalaxy(&cfg) == 0 )
176 return -ENODEV;
177
178 return 0;
179}
180
181static void __exit cleanup_sgalaxy(void)
182{
183 unload_sgalaxy(&cfg);
184}
185
186module_init(init_sgalaxy);
187module_exit(cleanup_sgalaxy);
188
189#ifndef MODULE
190static int __init setup_sgalaxy(char *str)
191{
192 /* io, irq, dma, dma2, sgbase */
193 int ints[6];
194
195 str = get_options(str, ARRAY_SIZE(ints), ints);
196 io = ints[1];
197 irq = ints[2];
198 dma = ints[3];
199 dma2 = ints[4];
200 sgbase = ints[5];
201
202 return 1;
203}
204
205__setup("sgalaxy=", setup_sgalaxy);
206#endif
207MODULE_LICENSE("GPL");