blob: e59505789359dbec837b9d9eb73fe867277311b5 [file] [log] [blame]
Seth Levyceb80362011-06-06 19:42:44 -04001/*
2 * PLX NET2272 high/full speed USB device controller
3 *
4 * Copyright (C) 2005-2006 PLX Technology, Inc.
5 * Copyright (C) 2006-2011 Analog Devices, Inc.
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
20 */
21
22#ifndef __NET2272_H__
23#define __NET2272_H__
24
25/* Main Registers */
26#define REGADDRPTR 0x00
27#define REGDATA 0x01
28#define IRQSTAT0 0x02
29#define ENDPOINT_0_INTERRUPT 0
30#define ENDPOINT_A_INTERRUPT 1
31#define ENDPOINT_B_INTERRUPT 2
32#define ENDPOINT_C_INTERRUPT 3
33#define VIRTUALIZED_ENDPOINT_INTERRUPT 4
34#define SETUP_PACKET_INTERRUPT 5
35#define DMA_DONE_INTERRUPT 6
36#define SOF_INTERRUPT 7
37#define IRQSTAT1 0x03
38#define CONTROL_STATUS_INTERRUPT 1
39#define VBUS_INTERRUPT 2
40#define SUSPEND_REQUEST_INTERRUPT 3
41#define SUSPEND_REQUEST_CHANGE_INTERRUPT 4
42#define RESUME_INTERRUPT 5
43#define ROOT_PORT_RESET_INTERRUPT 6
44#define RESET_STATUS 7
45#define PAGESEL 0x04
46#define DMAREQ 0x1c
47#define DMA_ENDPOINT_SELECT 0
48#define DREQ_POLARITY 1
49#define DACK_POLARITY 2
50#define EOT_POLARITY 3
51#define DMA_CONTROL_DACK 4
52#define DMA_REQUEST_ENABLE 5
53#define DMA_REQUEST 6
54#define DMA_BUFFER_VALID 7
55#define SCRATCH 0x1d
56#define IRQENB0 0x20
57#define ENDPOINT_0_INTERRUPT_ENABLE 0
58#define ENDPOINT_A_INTERRUPT_ENABLE 1
59#define ENDPOINT_B_INTERRUPT_ENABLE 2
60#define ENDPOINT_C_INTERRUPT_ENABLE 3
61#define VIRTUALIZED_ENDPOINT_INTERRUPT_ENABLE 4
62#define SETUP_PACKET_INTERRUPT_ENABLE 5
63#define DMA_DONE_INTERRUPT_ENABLE 6
64#define SOF_INTERRUPT_ENABLE 7
65#define IRQENB1 0x21
66#define VBUS_INTERRUPT_ENABLE 2
67#define SUSPEND_REQUEST_INTERRUPT_ENABLE 3
68#define SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE 4
69#define RESUME_INTERRUPT_ENABLE 5
70#define ROOT_PORT_RESET_INTERRUPT_ENABLE 6
71#define LOCCTL 0x22
72#define DATA_WIDTH 0
73#define LOCAL_CLOCK_OUTPUT 1
74#define LOCAL_CLOCK_OUTPUT_OFF 0
75#define LOCAL_CLOCK_OUTPUT_3_75MHZ 1
76#define LOCAL_CLOCK_OUTPUT_7_5MHZ 2
77#define LOCAL_CLOCK_OUTPUT_15MHZ 3
78#define LOCAL_CLOCK_OUTPUT_30MHZ 4
79#define LOCAL_CLOCK_OUTPUT_60MHZ 5
80#define DMA_SPLIT_BUS_MODE 4
81#define BYTE_SWAP 5
82#define BUFFER_CONFIGURATION 6
83#define BUFFER_CONFIGURATION_EPA512_EPB512 0
84#define BUFFER_CONFIGURATION_EPA1024_EPB512 1
85#define BUFFER_CONFIGURATION_EPA1024_EPB1024 2
86#define BUFFER_CONFIGURATION_EPA1024DB 3
87#define CHIPREV_LEGACY 0x23
88#define NET2270_LEGACY_REV 0x40
89#define LOCCTL1 0x24
90#define DMA_MODE 0
91#define SLOW_DREQ 0
92#define FAST_DREQ 1
93#define BURST_MODE 2
94#define DMA_DACK_ENABLE 2
95#define CHIPREV_2272 0x25
96#define CHIPREV_NET2272_R1 0x10
97#define CHIPREV_NET2272_R1A 0x11
98/* USB Registers */
99#define USBCTL0 0x18
100#define IO_WAKEUP_ENABLE 1
101#define USB_DETECT_ENABLE 3
102#define USB_ROOT_PORT_WAKEUP_ENABLE 5
103#define USBCTL1 0x19
104#define VBUS_PIN 0
105#define USB_FULL_SPEED 1
106#define USB_HIGH_SPEED 2
107#define GENERATE_RESUME 3
108#define VIRTUAL_ENDPOINT_ENABLE 4
109#define FRAME0 0x1a
110#define FRAME1 0x1b
111#define OURADDR 0x30
112#define FORCE_IMMEDIATE 7
113#define USBDIAG 0x31
114#define FORCE_TRANSMIT_CRC_ERROR 0
115#define PREVENT_TRANSMIT_BIT_STUFF 1
116#define FORCE_RECEIVE_ERROR 2
117#define FAST_TIMES 4
118#define USBTEST 0x32
119#define TEST_MODE_SELECT 0
120#define NORMAL_OPERATION 0
121#define TEST_J 1
122#define TEST_K 2
123#define TEST_SE0_NAK 3
124#define TEST_PACKET 4
125#define TEST_FORCE_ENABLE 5
126#define XCVRDIAG 0x33
127#define FORCE_FULL_SPEED 2
128#define FORCE_HIGH_SPEED 3
129#define OPMODE 4
130#define NORMAL_OPERATION 0
131#define NON_DRIVING 1
132#define DISABLE_BITSTUFF_AND_NRZI_ENCODE 2
133#define LINESTATE 6
134#define SE0_STATE 0
135#define J_STATE 1
136#define K_STATE 2
137#define SE1_STATE 3
138#define VIRTOUT0 0x34
139#define VIRTOUT1 0x35
140#define VIRTIN0 0x36
141#define VIRTIN1 0x37
142#define SETUP0 0x40
143#define SETUP1 0x41
144#define SETUP2 0x42
145#define SETUP3 0x43
146#define SETUP4 0x44
147#define SETUP5 0x45
148#define SETUP6 0x46
149#define SETUP7 0x47
150/* Endpoint Registers (Paged via PAGESEL) */
151#define EP_DATA 0x05
152#define EP_STAT0 0x06
153#define DATA_IN_TOKEN_INTERRUPT 0
154#define DATA_OUT_TOKEN_INTERRUPT 1
155#define DATA_PACKET_TRANSMITTED_INTERRUPT 2
156#define DATA_PACKET_RECEIVED_INTERRUPT 3
157#define SHORT_PACKET_TRANSFERRED_INTERRUPT 4
158#define NAK_OUT_PACKETS 5
159#define BUFFER_EMPTY 6
160#define BUFFER_FULL 7
161#define EP_STAT1 0x07
162#define TIMEOUT 0
163#define USB_OUT_ACK_SENT 1
164#define USB_OUT_NAK_SENT 2
165#define USB_IN_ACK_RCVD 3
166#define USB_IN_NAK_SENT 4
167#define USB_STALL_SENT 5
168#define LOCAL_OUT_ZLP 6
169#define BUFFER_FLUSH 7
170#define EP_TRANSFER0 0x08
171#define EP_TRANSFER1 0x09
172#define EP_TRANSFER2 0x0a
173#define EP_IRQENB 0x0b
174#define DATA_IN_TOKEN_INTERRUPT_ENABLE 0
175#define DATA_OUT_TOKEN_INTERRUPT_ENABLE 1
176#define DATA_PACKET_TRANSMITTED_INTERRUPT_ENABLE 2
177#define DATA_PACKET_RECEIVED_INTERRUPT_ENABLE 3
178#define SHORT_PACKET_TRANSFERRED_INTERRUPT_ENABLE 4
179#define EP_AVAIL0 0x0c
180#define EP_AVAIL1 0x0d
181#define EP_RSPCLR 0x0e
182#define EP_RSPSET 0x0f
183#define ENDPOINT_HALT 0
184#define ENDPOINT_TOGGLE 1
185#define NAK_OUT_PACKETS_MODE 2
186#define CONTROL_STATUS_PHASE_HANDSHAKE 3
187#define INTERRUPT_MODE 4
188#define AUTOVALIDATE 5
189#define HIDE_STATUS_PHASE 6
190#define ALT_NAK_OUT_PACKETS 7
191#define EP_MAXPKT0 0x28
192#define EP_MAXPKT1 0x29
193#define ADDITIONAL_TRANSACTION_OPPORTUNITIES 3
194#define NONE_ADDITIONAL_TRANSACTION 0
195#define ONE_ADDITIONAL_TRANSACTION 1
196#define TWO_ADDITIONAL_TRANSACTION 2
197#define EP_CFG 0x2a
198#define ENDPOINT_NUMBER 0
199#define ENDPOINT_DIRECTION 4
200#define ENDPOINT_TYPE 5
201#define ENDPOINT_ENABLE 7
202#define EP_HBW 0x2b
203#define HIGH_BANDWIDTH_OUT_TRANSACTION_PID 0
204#define DATA0_PID 0
205#define DATA1_PID 1
206#define DATA2_PID 2
207#define MDATA_PID 3
208#define EP_BUFF_STATES 0x2c
209#define BUFFER_A_STATE 0
210#define BUFFER_B_STATE 2
211#define BUFF_FREE 0
212#define BUFF_VALID 1
213#define BUFF_LCL 2
214#define BUFF_USB 3
215
216/*---------------------------------------------------------------------------*/
217
218#define PCI_DEVICE_ID_RDK1 0x9054
219
220/* PCI-RDK EPLD Registers */
221#define RDK_EPLD_IO_REGISTER1 0x00000000
222#define RDK_EPLD_USB_RESET 0
223#define RDK_EPLD_USB_POWERDOWN 1
224#define RDK_EPLD_USB_WAKEUP 2
225#define RDK_EPLD_USB_EOT 3
226#define RDK_EPLD_DPPULL 4
227#define RDK_EPLD_IO_REGISTER2 0x00000004
228#define RDK_EPLD_BUSWIDTH 0
229#define RDK_EPLD_USER 2
230#define RDK_EPLD_RESET_INTERRUPT_ENABLE 3
231#define RDK_EPLD_DMA_TIMEOUT_ENABLE 4
232#define RDK_EPLD_STATUS_REGISTER 0x00000008
233#define RDK_EPLD_USB_LRESET 0
234#define RDK_EPLD_REVISION_REGISTER 0x0000000c
235
236/* PCI-RDK PLX 9054 Registers */
237#define INTCSR 0x68
238#define PCI_INTERRUPT_ENABLE 8
239#define LOCAL_INTERRUPT_INPUT_ENABLE 11
240#define LOCAL_INPUT_INTERRUPT_ACTIVE 15
241#define LOCAL_DMA_CHANNEL_0_INTERRUPT_ENABLE 18
242#define LOCAL_DMA_CHANNEL_1_INTERRUPT_ENABLE 19
243#define DMA_CHANNEL_0_INTERRUPT_ACTIVE 21
244#define DMA_CHANNEL_1_INTERRUPT_ACTIVE 22
245#define CNTRL 0x6C
246#define RELOAD_CONFIGURATION_REGISTERS 29
247#define PCI_ADAPTER_SOFTWARE_RESET 30
248#define DMAMODE0 0x80
249#define LOCAL_BUS_WIDTH 0
250#define INTERNAL_WAIT_STATES 2
251#define TA_READY_INPUT_ENABLE 6
252#define LOCAL_BURST_ENABLE 8
253#define SCATTER_GATHER_MODE 9
254#define DONE_INTERRUPT_ENABLE 10
255#define LOCAL_ADDRESSING_MODE 11
256#define DEMAND_MODE 12
257#define DMA_EOT_ENABLE 14
258#define FAST_SLOW_TERMINATE_MODE_SELECT 15
259#define DMA_CHANNEL_INTERRUPT_SELECT 17
260#define DMAPADR0 0x84
261#define DMALADR0 0x88
262#define DMASIZ0 0x8c
263#define DMADPR0 0x90
264#define DESCRIPTOR_LOCATION 0
265#define END_OF_CHAIN 1
266#define INTERRUPT_AFTER_TERMINAL_COUNT 2
267#define DIRECTION_OF_TRANSFER 3
268#define DMACSR0 0xa8
269#define CHANNEL_ENABLE 0
270#define CHANNEL_START 1
271#define CHANNEL_ABORT 2
272#define CHANNEL_CLEAR_INTERRUPT 3
273#define CHANNEL_DONE 4
274#define DMATHR 0xb0
275#define LBRD1 0xf8
276#define MEMORY_SPACE_LOCAL_BUS_WIDTH 0
277#define W8_BIT 0
278#define W16_BIT 1
279
280/* Special OR'ing of INTCSR bits */
281#define LOCAL_INTERRUPT_TEST \
282 ((1 << LOCAL_INPUT_INTERRUPT_ACTIVE) | \
283 (1 << LOCAL_INTERRUPT_INPUT_ENABLE))
284
285#define DMA_CHANNEL_0_TEST \
286 ((1 << DMA_CHANNEL_0_INTERRUPT_ACTIVE) | \
287 (1 << LOCAL_DMA_CHANNEL_0_INTERRUPT_ENABLE))
288
289#define DMA_CHANNEL_1_TEST \
290 ((1 << DMA_CHANNEL_1_INTERRUPT_ACTIVE) | \
291 (1 << LOCAL_DMA_CHANNEL_1_INTERRUPT_ENABLE))
292
293/* EPLD Registers */
294#define RDK_EPLD_IO_REGISTER1 0x00000000
295#define RDK_EPLD_USB_RESET 0
296#define RDK_EPLD_USB_POWERDOWN 1
297#define RDK_EPLD_USB_WAKEUP 2
298#define RDK_EPLD_USB_EOT 3
299#define RDK_EPLD_DPPULL 4
300#define RDK_EPLD_IO_REGISTER2 0x00000004
301#define RDK_EPLD_BUSWIDTH 0
302#define RDK_EPLD_USER 2
303#define RDK_EPLD_RESET_INTERRUPT_ENABLE 3
304#define RDK_EPLD_DMA_TIMEOUT_ENABLE 4
305#define RDK_EPLD_STATUS_REGISTER 0x00000008
306#define RDK_EPLD_USB_LRESET 0
307#define RDK_EPLD_REVISION_REGISTER 0x0000000c
308
309#define EPLD_IO_CONTROL_REGISTER 0x400
310#define NET2272_RESET 0
311#define BUSWIDTH 1
312#define MPX_MODE 3
313#define USER 4
314#define DMA_TIMEOUT_ENABLE 5
315#define DMA_CTL_DACK 6
316#define EPLD_DMA_ENABLE 7
317#define EPLD_DMA_CONTROL_REGISTER 0x800
318#define SPLIT_DMA_MODE 0
319#define SPLIT_DMA_DIRECTION 1
320#define SPLIT_DMA_ENABLE 2
321#define SPLIT_DMA_INTERRUPT_ENABLE 3
322#define SPLIT_DMA_INTERRUPT 4
323#define EPLD_DMA_MODE 5
324#define EPLD_DMA_CONTROLLER_ENABLE 7
325#define SPLIT_DMA_ADDRESS_LOW 0xc00
326#define SPLIT_DMA_ADDRESS_HIGH 0x1000
327#define SPLIT_DMA_BYTE_COUNT_LOW 0x1400
328#define SPLIT_DMA_BYTE_COUNT_HIGH 0x1800
329#define EPLD_REVISION_REGISTER 0x1c00
330#define SPLIT_DMA_RAM 0x4000
331#define DMA_RAM_SIZE 0x1000
332
333/*---------------------------------------------------------------------------*/
334
335#define PCI_DEVICE_ID_RDK2 0x3272
336
337/* PCI-RDK version 2 registers */
338
339/* Main Control Registers */
340
341#define RDK2_IRQENB 0x00
342#define RDK2_IRQSTAT 0x04
343#define PB7 23
344#define PB6 22
345#define PB5 21
346#define PB4 20
347#define PB3 19
348#define PB2 18
349#define PB1 17
350#define PB0 16
351#define GP3 23
352#define GP2 23
353#define GP1 23
354#define GP0 23
355#define DMA_RETRY_ABORT 6
356#define DMA_PAUSE_DONE 5
357#define DMA_ABORT_DONE 4
358#define DMA_OUT_FIFO_TRANSFER_DONE 3
359#define DMA_LOCAL_DONE 2
360#define DMA_PCI_DONE 1
361#define NET2272_PCI_IRQ 0
362
363#define RDK2_LOCCTLRDK 0x08
364#define CHIP_RESET 3
365#define SPLIT_DMA 2
366#define MULTIPLEX_MODE 1
367#define BUS_WIDTH 0
368
369#define RDK2_GPIOCTL 0x10
370#define GP3_OUT_ENABLE 7
371#define GP2_OUT_ENABLE 6
372#define GP1_OUT_ENABLE 5
373#define GP0_OUT_ENABLE 4
374#define GP3_DATA 3
375#define GP2_DATA 2
376#define GP1_DATA 1
377#define GP0_DATA 0
378
379#define RDK2_LEDSW 0x14
380#define LED3 27
381#define LED2 26
382#define LED1 25
383#define LED0 24
384#define PBUTTON 16
385#define DIPSW 0
386
387#define RDK2_DIAG 0x18
388#define RDK2_FAST_TIMES 2
389#define FORCE_PCI_SERR 1
390#define FORCE_PCI_INT 0
391#define RDK2_FPGAREV 0x1C
392
393/* Dma Control registers */
394#define RDK2_DMACTL 0x80
395#define ADDR_HOLD 24
396#define RETRY_COUNT 16 /* 23:16 */
397#define FIFO_THRESHOLD 11 /* 15:11 */
398#define MEM_WRITE_INVALIDATE 10
399#define READ_MULTIPLE 9
400#define READ_LINE 8
401#define RDK2_DMA_MODE 6 /* 7:6 */
402#define CONTROL_DACK 5
403#define EOT_ENABLE 4
404#define EOT_POLARITY 3
405#define DACK_POLARITY 2
406#define DREQ_POLARITY 1
407#define DMA_ENABLE 0
408
409#define RDK2_DMASTAT 0x84
410#define GATHER_COUNT 12 /* 14:12 */
411#define FIFO_COUNT 6 /* 11:6 */
412#define FIFO_FLUSH 5
413#define FIFO_TRANSFER 4
414#define PAUSE_DONE 3
415#define ABORT_DONE 2
416#define DMA_ABORT 1
417#define DMA_START 0
418
419#define RDK2_DMAPCICOUNT 0x88
420#define DMA_DIRECTION 31
421#define DMA_PCI_BYTE_COUNT 0 /* 0:23 */
422
423#define RDK2_DMALOCCOUNT 0x8C /* 0:23 dma local byte count */
424
425#define RDK2_DMAADDR 0x90 /* 2:31 PCI bus starting address */
426
427/*---------------------------------------------------------------------------*/
428
429#define REG_INDEXED_THRESHOLD (1 << 5)
430
431/* DRIVER DATA STRUCTURES and UTILITIES */
432struct net2272_ep {
433 struct usb_ep ep;
434 struct net2272 *dev;
435 unsigned long irqs;
436
437 /* analogous to a host-side qh */
438 struct list_head queue;
439 const struct usb_endpoint_descriptor *desc;
440 unsigned num:8,
441 fifo_size:12,
442 stopped:1,
443 wedged:1,
444 is_in:1,
445 is_iso:1,
446 dma:1,
447 not_empty:1;
448};
449
450struct net2272 {
451 /* each device provides one gadget, several endpoints */
452 struct usb_gadget gadget;
453 struct device *dev;
454 unsigned short dev_id;
455
456 spinlock_t lock;
457 struct net2272_ep ep[4];
458 struct usb_gadget_driver *driver;
459 unsigned protocol_stall:1,
460 softconnect:1,
461 is_selfpowered:1,
462 wakeup:1,
463 dma_eot_polarity:1,
464 dma_dack_polarity:1,
465 dma_dreq_polarity:1,
466 dma_busy:1;
467 u16 chiprev;
468 u8 pagesel;
469
470 unsigned int irq;
471 unsigned short fifo_mode;
472
473 unsigned int base_shift;
474 u16 __iomem *base_addr;
475 union {
476#ifdef CONFIG_PCI
477 struct {
478 void __iomem *plx9054_base_addr;
479 void __iomem *epld_base_addr;
480 } rdk1;
481 struct {
482 /* Bar0, Bar1 is base_addr both mem-mapped */
483 void __iomem *fpga_base_addr;
484 } rdk2;
485#endif
486 };
487};
488
489static void __iomem *
490net2272_reg_addr(struct net2272 *dev, unsigned int reg)
491{
492 return dev->base_addr + (reg << dev->base_shift);
493}
494
495static void
496net2272_write(struct net2272 *dev, unsigned int reg, u8 value)
497{
498 if (reg >= REG_INDEXED_THRESHOLD) {
499 /*
500 * Indexed register; use REGADDRPTR/REGDATA
501 * - Save and restore REGADDRPTR. This prevents REGADDRPTR from
502 * changes between other code sections, but it is time consuming.
503 * - Performance tips: either do not save and restore REGADDRPTR (if it
504 * is safe) or do save/restore operations only in critical sections.
505 u8 tmp = readb(dev->base_addr + REGADDRPTR);
506 */
507 writeb((u8)reg, net2272_reg_addr(dev, REGADDRPTR));
508 writeb(value, net2272_reg_addr(dev, REGDATA));
509 /* writeb(tmp, net2272_reg_addr(dev, REGADDRPTR)); */
510 } else
511 writeb(value, net2272_reg_addr(dev, reg));
512}
513
514static u8
515net2272_read(struct net2272 *dev, unsigned int reg)
516{
517 u8 ret;
518
519 if (reg >= REG_INDEXED_THRESHOLD) {
520 /*
521 * Indexed register; use REGADDRPTR/REGDATA
522 * - Save and restore REGADDRPTR. This prevents REGADDRPTR from
523 * changes between other code sections, but it is time consuming.
524 * - Performance tips: either do not save and restore REGADDRPTR (if it
525 * is safe) or do save/restore operations only in critical sections.
526 u8 tmp = readb(dev->base_addr + REGADDRPTR);
527 */
528 writeb((u8)reg, net2272_reg_addr(dev, REGADDRPTR));
529 ret = readb(net2272_reg_addr(dev, REGDATA));
530 /* writeb(tmp, net2272_reg_addr(dev, REGADDRPTR)); */
531 } else
532 ret = readb(net2272_reg_addr(dev, reg));
533
534 return ret;
535}
536
537static void
538net2272_ep_write(struct net2272_ep *ep, unsigned int reg, u8 value)
539{
540 struct net2272 *dev = ep->dev;
541
542 if (dev->pagesel != ep->num) {
543 net2272_write(dev, PAGESEL, ep->num);
544 dev->pagesel = ep->num;
545 }
546 net2272_write(dev, reg, value);
547}
548
549static u8
550net2272_ep_read(struct net2272_ep *ep, unsigned int reg)
551{
552 struct net2272 *dev = ep->dev;
553
554 if (dev->pagesel != ep->num) {
555 net2272_write(dev, PAGESEL, ep->num);
556 dev->pagesel = ep->num;
557 }
558 return net2272_read(dev, reg);
559}
560
561static void allow_status(struct net2272_ep *ep)
562{
563 /* ep0 only */
564 net2272_ep_write(ep, EP_RSPCLR,
565 (1 << CONTROL_STATUS_PHASE_HANDSHAKE) |
566 (1 << ALT_NAK_OUT_PACKETS) |
567 (1 << NAK_OUT_PACKETS_MODE));
568 ep->stopped = 1;
569}
570
571static void set_halt(struct net2272_ep *ep)
572{
573 /* ep0 and bulk/intr endpoints */
574 net2272_ep_write(ep, EP_RSPCLR, 1 << CONTROL_STATUS_PHASE_HANDSHAKE);
575 net2272_ep_write(ep, EP_RSPSET, 1 << ENDPOINT_HALT);
576}
577
578static void clear_halt(struct net2272_ep *ep)
579{
580 /* ep0 and bulk/intr endpoints */
581 net2272_ep_write(ep, EP_RSPCLR,
582 (1 << ENDPOINT_HALT) | (1 << ENDPOINT_TOGGLE));
583}
584
585/* count (<= 4) bytes in the next fifo write will be valid */
586static void set_fifo_bytecount(struct net2272_ep *ep, unsigned count)
587{
588 /* net2272_ep_write will truncate to u8 for us */
589 net2272_ep_write(ep, EP_TRANSFER2, count >> 16);
590 net2272_ep_write(ep, EP_TRANSFER1, count >> 8);
591 net2272_ep_write(ep, EP_TRANSFER0, count);
592}
593
594struct net2272_request {
595 struct usb_request req;
596 struct list_head queue;
597 unsigned mapped:1,
598 valid:1;
599};
600
601#endif