Kyungmin Park | 156f252 | 2010-06-16 09:04:16 +0200 | [diff] [blame] | 1 | /* |
| 2 | * max8998.c - Voltage regulator driver for the Maxim 8998 |
| 3 | * |
| 4 | * Copyright (C) 2009-2010 Samsung Electronics |
| 5 | * Kyungmin Park <kyungmin.park@samsung.com> |
| 6 | * Marek Szyprowski <m.szyprowski@samsung.com> |
| 7 | * |
| 8 | * This program is free software; you can redistribute it and/or modify |
| 9 | * it under the terms of the GNU General Public License as published by |
| 10 | * the Free Software Foundation; either version 2 of the License, or |
| 11 | * (at your option) any later version. |
| 12 | * |
| 13 | * This program is distributed in the hope that it will be useful, |
| 14 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 15 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 16 | * GNU General Public License for more details. |
| 17 | * |
| 18 | * You should have received a copy of the GNU General Public License |
| 19 | * along with this program; if not, write to the Free Software |
| 20 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| 21 | */ |
| 22 | |
| 23 | #include <linux/module.h> |
| 24 | #include <linux/init.h> |
| 25 | #include <linux/i2c.h> |
| 26 | #include <linux/err.h> |
| 27 | #include <linux/gpio.h> |
| 28 | #include <linux/slab.h> |
| 29 | #include <linux/interrupt.h> |
| 30 | #include <linux/mutex.h> |
MyungJoo Ham | c5a4655 | 2010-07-20 08:07:07 +0200 | [diff] [blame] | 31 | #include <linux/delay.h> |
Kyungmin Park | 156f252 | 2010-06-16 09:04:16 +0200 | [diff] [blame] | 32 | #include <linux/platform_device.h> |
| 33 | #include <linux/regulator/driver.h> |
| 34 | #include <linux/mfd/max8998.h> |
| 35 | #include <linux/mfd/max8998-private.h> |
| 36 | |
| 37 | struct max8998_data { |
| 38 | struct device *dev; |
| 39 | struct max8998_dev *iodev; |
| 40 | int num_regulators; |
| 41 | struct regulator_dev **rdev; |
| 42 | }; |
| 43 | |
| 44 | struct voltage_map_desc { |
| 45 | int min; |
| 46 | int max; |
| 47 | int step; |
| 48 | }; |
| 49 | |
| 50 | /* Voltage maps */ |
| 51 | static const struct voltage_map_desc ldo23_voltage_map_desc = { |
| 52 | .min = 800, .step = 50, .max = 1300, |
| 53 | }; |
| 54 | static const struct voltage_map_desc ldo456711_voltage_map_desc = { |
| 55 | .min = 1600, .step = 100, .max = 3600, |
| 56 | }; |
| 57 | static const struct voltage_map_desc ldo8_voltage_map_desc = { |
| 58 | .min = 3000, .step = 100, .max = 3600, |
| 59 | }; |
| 60 | static const struct voltage_map_desc ldo9_voltage_map_desc = { |
| 61 | .min = 2800, .step = 100, .max = 3100, |
| 62 | }; |
| 63 | static const struct voltage_map_desc ldo10_voltage_map_desc = { |
| 64 | .min = 950, .step = 50, .max = 1300, |
| 65 | }; |
| 66 | static const struct voltage_map_desc ldo1213_voltage_map_desc = { |
| 67 | .min = 800, .step = 100, .max = 3300, |
| 68 | }; |
| 69 | static const struct voltage_map_desc ldo1415_voltage_map_desc = { |
| 70 | .min = 1200, .step = 100, .max = 3300, |
| 71 | }; |
| 72 | static const struct voltage_map_desc ldo1617_voltage_map_desc = { |
| 73 | .min = 1600, .step = 100, .max = 3600, |
| 74 | }; |
| 75 | static const struct voltage_map_desc buck12_voltage_map_desc = { |
| 76 | .min = 750, .step = 25, .max = 1525, |
| 77 | }; |
| 78 | static const struct voltage_map_desc buck3_voltage_map_desc = { |
| 79 | .min = 1600, .step = 100, .max = 3600, |
| 80 | }; |
| 81 | static const struct voltage_map_desc buck4_voltage_map_desc = { |
| 82 | .min = 800, .step = 100, .max = 2300, |
| 83 | }; |
| 84 | |
| 85 | static const struct voltage_map_desc *ldo_voltage_map[] = { |
| 86 | NULL, |
| 87 | NULL, |
| 88 | &ldo23_voltage_map_desc, /* LDO2 */ |
| 89 | &ldo23_voltage_map_desc, /* LDO3 */ |
| 90 | &ldo456711_voltage_map_desc, /* LDO4 */ |
| 91 | &ldo456711_voltage_map_desc, /* LDO5 */ |
| 92 | &ldo456711_voltage_map_desc, /* LDO6 */ |
| 93 | &ldo456711_voltage_map_desc, /* LDO7 */ |
| 94 | &ldo8_voltage_map_desc, /* LDO8 */ |
| 95 | &ldo9_voltage_map_desc, /* LDO9 */ |
| 96 | &ldo10_voltage_map_desc, /* LDO10 */ |
| 97 | &ldo456711_voltage_map_desc, /* LDO11 */ |
| 98 | &ldo1213_voltage_map_desc, /* LDO12 */ |
| 99 | &ldo1213_voltage_map_desc, /* LDO13 */ |
| 100 | &ldo1415_voltage_map_desc, /* LDO14 */ |
| 101 | &ldo1415_voltage_map_desc, /* LDO15 */ |
| 102 | &ldo1617_voltage_map_desc, /* LDO16 */ |
| 103 | &ldo1617_voltage_map_desc, /* LDO17 */ |
| 104 | &buck12_voltage_map_desc, /* BUCK1 */ |
| 105 | &buck12_voltage_map_desc, /* BUCK2 */ |
| 106 | &buck3_voltage_map_desc, /* BUCK3 */ |
| 107 | &buck4_voltage_map_desc, /* BUCK4 */ |
| 108 | }; |
| 109 | |
| 110 | static inline int max8998_get_ldo(struct regulator_dev *rdev) |
| 111 | { |
| 112 | return rdev_get_id(rdev); |
| 113 | } |
| 114 | |
| 115 | static int max8998_list_voltage(struct regulator_dev *rdev, |
| 116 | unsigned int selector) |
| 117 | { |
| 118 | const struct voltage_map_desc *desc; |
| 119 | int ldo = max8998_get_ldo(rdev); |
| 120 | int val; |
| 121 | |
Axel Lin | 1b69d8e | 2010-08-04 14:34:10 +0800 | [diff] [blame] | 122 | if (ldo >= ARRAY_SIZE(ldo_voltage_map)) |
Kyungmin Park | 156f252 | 2010-06-16 09:04:16 +0200 | [diff] [blame] | 123 | return -EINVAL; |
| 124 | |
| 125 | desc = ldo_voltage_map[ldo]; |
| 126 | if (desc == NULL) |
| 127 | return -EINVAL; |
| 128 | |
| 129 | val = desc->min + desc->step * selector; |
| 130 | if (val > desc->max) |
| 131 | return -EINVAL; |
| 132 | |
| 133 | return val * 1000; |
| 134 | } |
| 135 | |
| 136 | static int max8998_get_enable_register(struct regulator_dev *rdev, |
| 137 | int *reg, int *shift) |
| 138 | { |
| 139 | int ldo = max8998_get_ldo(rdev); |
| 140 | |
| 141 | switch (ldo) { |
| 142 | case MAX8998_LDO2 ... MAX8998_LDO5: |
| 143 | *reg = MAX8998_REG_ONOFF1; |
| 144 | *shift = 3 - (ldo - MAX8998_LDO2); |
| 145 | break; |
| 146 | case MAX8998_LDO6 ... MAX8998_LDO13: |
| 147 | *reg = MAX8998_REG_ONOFF2; |
| 148 | *shift = 7 - (ldo - MAX8998_LDO6); |
| 149 | break; |
| 150 | case MAX8998_LDO14 ... MAX8998_LDO17: |
| 151 | *reg = MAX8998_REG_ONOFF3; |
| 152 | *shift = 7 - (ldo - MAX8998_LDO14); |
| 153 | break; |
| 154 | case MAX8998_BUCK1 ... MAX8998_BUCK4: |
| 155 | *reg = MAX8998_REG_ONOFF1; |
| 156 | *shift = 7 - (ldo - MAX8998_BUCK1); |
| 157 | break; |
| 158 | case MAX8998_EN32KHZ_AP ... MAX8998_ENVICHG: |
| 159 | *reg = MAX8998_REG_ONOFF4; |
| 160 | *shift = 7 - (ldo - MAX8998_EN32KHZ_AP); |
| 161 | break; |
| 162 | case MAX8998_ESAFEOUT1 ... MAX8998_ESAFEOUT2: |
| 163 | *reg = MAX8998_REG_CHGR2; |
| 164 | *shift = 7 - (ldo - MAX8998_ESAFEOUT1); |
| 165 | break; |
| 166 | default: |
| 167 | return -EINVAL; |
| 168 | } |
| 169 | |
| 170 | return 0; |
| 171 | } |
| 172 | |
| 173 | static int max8998_ldo_is_enabled(struct regulator_dev *rdev) |
| 174 | { |
| 175 | struct max8998_data *max8998 = rdev_get_drvdata(rdev); |
| 176 | int ret, reg, shift = 8; |
| 177 | u8 val; |
| 178 | |
| 179 | ret = max8998_get_enable_register(rdev, ®, &shift); |
| 180 | if (ret) |
| 181 | return ret; |
| 182 | |
| 183 | ret = max8998_read_reg(max8998->iodev, reg, &val); |
| 184 | if (ret) |
| 185 | return ret; |
| 186 | |
| 187 | return val & (1 << shift); |
| 188 | } |
| 189 | |
| 190 | static int max8998_ldo_enable(struct regulator_dev *rdev) |
| 191 | { |
| 192 | struct max8998_data *max8998 = rdev_get_drvdata(rdev); |
| 193 | int reg, shift = 8, ret; |
| 194 | |
| 195 | ret = max8998_get_enable_register(rdev, ®, &shift); |
| 196 | if (ret) |
| 197 | return ret; |
| 198 | |
| 199 | return max8998_update_reg(max8998->iodev, reg, 1<<shift, 1<<shift); |
| 200 | } |
| 201 | |
| 202 | static int max8998_ldo_disable(struct regulator_dev *rdev) |
| 203 | { |
| 204 | struct max8998_data *max8998 = rdev_get_drvdata(rdev); |
| 205 | int reg, shift = 8, ret; |
| 206 | |
| 207 | ret = max8998_get_enable_register(rdev, ®, &shift); |
| 208 | if (ret) |
| 209 | return ret; |
| 210 | |
| 211 | return max8998_update_reg(max8998->iodev, reg, 0, 1<<shift); |
| 212 | } |
| 213 | |
| 214 | static int max8998_get_voltage_register(struct regulator_dev *rdev, |
| 215 | int *_reg, int *_shift, int *_mask) |
| 216 | { |
| 217 | int ldo = max8998_get_ldo(rdev); |
| 218 | int reg, shift = 0, mask = 0xff; |
| 219 | |
| 220 | switch (ldo) { |
| 221 | case MAX8998_LDO2 ... MAX8998_LDO3: |
| 222 | reg = MAX8998_REG_LDO2_LDO3; |
| 223 | mask = 0xf; |
| 224 | if (ldo == MAX8998_LDO2) |
| 225 | shift = 4; |
| 226 | else |
| 227 | shift = 0; |
| 228 | break; |
| 229 | case MAX8998_LDO4 ... MAX8998_LDO7: |
| 230 | reg = MAX8998_REG_LDO4 + (ldo - MAX8998_LDO4); |
| 231 | break; |
| 232 | case MAX8998_LDO8 ... MAX8998_LDO9: |
| 233 | reg = MAX8998_REG_LDO8_LDO9; |
| 234 | mask = 0xf; |
| 235 | if (ldo == MAX8998_LDO8) |
| 236 | shift = 4; |
| 237 | else |
| 238 | shift = 0; |
| 239 | break; |
| 240 | case MAX8998_LDO10 ... MAX8998_LDO11: |
| 241 | reg = MAX8998_REG_LDO10_LDO11; |
| 242 | if (ldo == MAX8998_LDO10) { |
| 243 | shift = 5; |
| 244 | mask = 0x7; |
| 245 | } else { |
| 246 | shift = 0; |
| 247 | mask = 0x1f; |
| 248 | } |
| 249 | break; |
| 250 | case MAX8998_LDO12 ... MAX8998_LDO17: |
| 251 | reg = MAX8998_REG_LDO12 + (ldo - MAX8998_LDO12); |
| 252 | break; |
| 253 | case MAX8998_BUCK1: |
| 254 | reg = MAX8998_REG_BUCK1_DVSARM1; |
| 255 | break; |
| 256 | case MAX8998_BUCK2: |
| 257 | reg = MAX8998_REG_BUCK2_DVSINT1; |
| 258 | break; |
| 259 | case MAX8998_BUCK3: |
| 260 | reg = MAX8998_REG_BUCK3; |
| 261 | break; |
| 262 | case MAX8998_BUCK4: |
| 263 | reg = MAX8998_REG_BUCK4; |
| 264 | break; |
| 265 | default: |
| 266 | return -EINVAL; |
| 267 | } |
| 268 | |
| 269 | *_reg = reg; |
| 270 | *_shift = shift; |
| 271 | *_mask = mask; |
| 272 | |
| 273 | return 0; |
| 274 | } |
| 275 | |
| 276 | static int max8998_get_voltage(struct regulator_dev *rdev) |
| 277 | { |
| 278 | struct max8998_data *max8998 = rdev_get_drvdata(rdev); |
| 279 | int reg, shift = 0, mask, ret; |
| 280 | u8 val; |
| 281 | |
| 282 | ret = max8998_get_voltage_register(rdev, ®, &shift, &mask); |
| 283 | if (ret) |
| 284 | return ret; |
| 285 | |
| 286 | ret = max8998_read_reg(max8998->iodev, reg, &val); |
| 287 | if (ret) |
| 288 | return ret; |
| 289 | |
| 290 | val >>= shift; |
| 291 | val &= mask; |
| 292 | |
| 293 | return max8998_list_voltage(rdev, val); |
| 294 | } |
| 295 | |
| 296 | static int max8998_set_voltage(struct regulator_dev *rdev, |
| 297 | int min_uV, int max_uV) |
| 298 | { |
| 299 | struct max8998_data *max8998 = rdev_get_drvdata(rdev); |
| 300 | int min_vol = min_uV / 1000, max_vol = max_uV / 1000; |
MyungJoo Ham | c5a4655 | 2010-07-20 08:07:07 +0200 | [diff] [blame] | 301 | int previous_vol = 0; |
Kyungmin Park | 156f252 | 2010-06-16 09:04:16 +0200 | [diff] [blame] | 302 | const struct voltage_map_desc *desc; |
| 303 | int ldo = max8998_get_ldo(rdev); |
| 304 | int reg, shift = 0, mask, ret; |
| 305 | int i = 0; |
MyungJoo Ham | c5a4655 | 2010-07-20 08:07:07 +0200 | [diff] [blame] | 306 | u8 val; |
| 307 | bool en_ramp = false; |
Kyungmin Park | 156f252 | 2010-06-16 09:04:16 +0200 | [diff] [blame] | 308 | |
Axel Lin | 1b69d8e | 2010-08-04 14:34:10 +0800 | [diff] [blame] | 309 | if (ldo >= ARRAY_SIZE(ldo_voltage_map)) |
Kyungmin Park | 156f252 | 2010-06-16 09:04:16 +0200 | [diff] [blame] | 310 | return -EINVAL; |
| 311 | |
| 312 | desc = ldo_voltage_map[ldo]; |
| 313 | if (desc == NULL) |
| 314 | return -EINVAL; |
| 315 | |
| 316 | if (max_vol < desc->min || min_vol > desc->max) |
| 317 | return -EINVAL; |
| 318 | |
MyungJoo Ham | c5a4655 | 2010-07-20 08:07:07 +0200 | [diff] [blame] | 319 | while (desc->min + desc->step*i < min_vol && |
Kyungmin Park | 156f252 | 2010-06-16 09:04:16 +0200 | [diff] [blame] | 320 | desc->min + desc->step*i < desc->max) |
| 321 | i++; |
| 322 | |
MyungJoo Ham | c5a4655 | 2010-07-20 08:07:07 +0200 | [diff] [blame] | 323 | if (desc->min + desc->step*i > max_vol) |
| 324 | return -EINVAL; |
| 325 | |
Kyungmin Park | 156f252 | 2010-06-16 09:04:16 +0200 | [diff] [blame] | 326 | ret = max8998_get_voltage_register(rdev, ®, &shift, &mask); |
| 327 | if (ret) |
| 328 | return ret; |
| 329 | |
MyungJoo Ham | c5a4655 | 2010-07-20 08:07:07 +0200 | [diff] [blame] | 330 | /* wait for RAMP_UP_DELAY if rdev is BUCK1/2 and |
| 331 | * ENRAMP is ON */ |
| 332 | if (ldo == MAX8998_BUCK1 || ldo == MAX8998_BUCK2) { |
| 333 | max8998_read_reg(max8998->iodev, MAX8998_REG_ONOFF4, &val); |
| 334 | if (val & (1 << 4)) { |
| 335 | en_ramp = true; |
| 336 | previous_vol = max8998_get_voltage(rdev); |
| 337 | } |
| 338 | } |
| 339 | |
| 340 | ret = max8998_update_reg(max8998->iodev, reg, i<<shift, mask<<shift); |
| 341 | |
| 342 | if (en_ramp == true) { |
| 343 | int difference = desc->min + desc->step*i - previous_vol/1000; |
| 344 | if (difference > 0) |
| 345 | udelay(difference / ((val & 0x0f) + 1)); |
| 346 | } |
| 347 | |
| 348 | return ret; |
Kyungmin Park | 156f252 | 2010-06-16 09:04:16 +0200 | [diff] [blame] | 349 | } |
| 350 | |
| 351 | static struct regulator_ops max8998_ldo_ops = { |
| 352 | .list_voltage = max8998_list_voltage, |
| 353 | .is_enabled = max8998_ldo_is_enabled, |
| 354 | .enable = max8998_ldo_enable, |
| 355 | .disable = max8998_ldo_disable, |
| 356 | .get_voltage = max8998_get_voltage, |
| 357 | .set_voltage = max8998_set_voltage, |
| 358 | .set_suspend_enable = max8998_ldo_enable, |
| 359 | .set_suspend_disable = max8998_ldo_disable, |
| 360 | }; |
| 361 | |
| 362 | static struct regulator_ops max8998_buck_ops = { |
| 363 | .list_voltage = max8998_list_voltage, |
| 364 | .is_enabled = max8998_ldo_is_enabled, |
| 365 | .enable = max8998_ldo_enable, |
| 366 | .disable = max8998_ldo_disable, |
| 367 | .get_voltage = max8998_get_voltage, |
| 368 | .set_voltage = max8998_set_voltage, |
| 369 | .set_suspend_enable = max8998_ldo_enable, |
| 370 | .set_suspend_disable = max8998_ldo_disable, |
| 371 | }; |
| 372 | |
| 373 | static struct regulator_ops max8998_others_ops = { |
| 374 | .is_enabled = max8998_ldo_is_enabled, |
| 375 | .enable = max8998_ldo_enable, |
| 376 | .disable = max8998_ldo_disable, |
| 377 | .set_suspend_enable = max8998_ldo_enable, |
| 378 | .set_suspend_disable = max8998_ldo_disable, |
| 379 | }; |
| 380 | |
| 381 | static struct regulator_desc regulators[] = { |
| 382 | { |
| 383 | .name = "LDO2", |
| 384 | .id = MAX8998_LDO2, |
| 385 | .ops = &max8998_ldo_ops, |
| 386 | .type = REGULATOR_VOLTAGE, |
| 387 | .owner = THIS_MODULE, |
| 388 | }, { |
| 389 | .name = "LDO3", |
| 390 | .id = MAX8998_LDO3, |
| 391 | .ops = &max8998_ldo_ops, |
| 392 | .type = REGULATOR_VOLTAGE, |
| 393 | .owner = THIS_MODULE, |
| 394 | }, { |
| 395 | .name = "LDO4", |
| 396 | .id = MAX8998_LDO4, |
| 397 | .ops = &max8998_ldo_ops, |
| 398 | .type = REGULATOR_VOLTAGE, |
| 399 | .owner = THIS_MODULE, |
| 400 | }, { |
| 401 | .name = "LDO5", |
| 402 | .id = MAX8998_LDO5, |
| 403 | .ops = &max8998_ldo_ops, |
| 404 | .type = REGULATOR_VOLTAGE, |
| 405 | .owner = THIS_MODULE, |
| 406 | }, { |
| 407 | .name = "LDO6", |
| 408 | .id = MAX8998_LDO6, |
| 409 | .ops = &max8998_ldo_ops, |
| 410 | .type = REGULATOR_VOLTAGE, |
| 411 | .owner = THIS_MODULE, |
| 412 | }, { |
| 413 | .name = "LDO7", |
| 414 | .id = MAX8998_LDO7, |
| 415 | .ops = &max8998_ldo_ops, |
| 416 | .type = REGULATOR_VOLTAGE, |
| 417 | .owner = THIS_MODULE, |
| 418 | }, { |
| 419 | .name = "LDO8", |
| 420 | .id = MAX8998_LDO8, |
| 421 | .ops = &max8998_ldo_ops, |
| 422 | .type = REGULATOR_VOLTAGE, |
| 423 | .owner = THIS_MODULE, |
| 424 | }, { |
| 425 | .name = "LDO9", |
| 426 | .id = MAX8998_LDO9, |
| 427 | .ops = &max8998_ldo_ops, |
| 428 | .type = REGULATOR_VOLTAGE, |
| 429 | .owner = THIS_MODULE, |
| 430 | }, { |
| 431 | .name = "LDO10", |
| 432 | .id = MAX8998_LDO10, |
| 433 | .ops = &max8998_ldo_ops, |
| 434 | .type = REGULATOR_VOLTAGE, |
| 435 | .owner = THIS_MODULE, |
| 436 | }, { |
| 437 | .name = "LDO11", |
| 438 | .id = MAX8998_LDO11, |
| 439 | .ops = &max8998_ldo_ops, |
| 440 | .type = REGULATOR_VOLTAGE, |
| 441 | .owner = THIS_MODULE, |
| 442 | }, { |
| 443 | .name = "LDO12", |
| 444 | .id = MAX8998_LDO12, |
| 445 | .ops = &max8998_ldo_ops, |
| 446 | .type = REGULATOR_VOLTAGE, |
| 447 | .owner = THIS_MODULE, |
| 448 | }, { |
| 449 | .name = "LDO13", |
| 450 | .id = MAX8998_LDO13, |
| 451 | .ops = &max8998_ldo_ops, |
| 452 | .type = REGULATOR_VOLTAGE, |
| 453 | .owner = THIS_MODULE, |
| 454 | }, { |
| 455 | .name = "LDO14", |
| 456 | .id = MAX8998_LDO14, |
| 457 | .ops = &max8998_ldo_ops, |
| 458 | .type = REGULATOR_VOLTAGE, |
| 459 | .owner = THIS_MODULE, |
| 460 | }, { |
| 461 | .name = "LDO15", |
| 462 | .id = MAX8998_LDO15, |
| 463 | .ops = &max8998_ldo_ops, |
| 464 | .type = REGULATOR_VOLTAGE, |
| 465 | .owner = THIS_MODULE, |
| 466 | }, { |
| 467 | .name = "LDO16", |
| 468 | .id = MAX8998_LDO16, |
| 469 | .ops = &max8998_ldo_ops, |
| 470 | .type = REGULATOR_VOLTAGE, |
| 471 | .owner = THIS_MODULE, |
| 472 | }, { |
| 473 | .name = "LDO17", |
| 474 | .id = MAX8998_LDO17, |
| 475 | .ops = &max8998_ldo_ops, |
| 476 | .type = REGULATOR_VOLTAGE, |
| 477 | .owner = THIS_MODULE, |
| 478 | }, { |
| 479 | .name = "BUCK1", |
| 480 | .id = MAX8998_BUCK1, |
| 481 | .ops = &max8998_buck_ops, |
| 482 | .type = REGULATOR_VOLTAGE, |
| 483 | .owner = THIS_MODULE, |
| 484 | }, { |
| 485 | .name = "BUCK2", |
| 486 | .id = MAX8998_BUCK2, |
| 487 | .ops = &max8998_buck_ops, |
| 488 | .type = REGULATOR_VOLTAGE, |
| 489 | .owner = THIS_MODULE, |
| 490 | }, { |
| 491 | .name = "BUCK3", |
| 492 | .id = MAX8998_BUCK3, |
| 493 | .ops = &max8998_buck_ops, |
| 494 | .type = REGULATOR_VOLTAGE, |
| 495 | .owner = THIS_MODULE, |
| 496 | }, { |
| 497 | .name = "BUCK4", |
| 498 | .id = MAX8998_BUCK4, |
| 499 | .ops = &max8998_buck_ops, |
| 500 | .type = REGULATOR_VOLTAGE, |
| 501 | .owner = THIS_MODULE, |
| 502 | }, { |
| 503 | .name = "EN32KHz AP", |
| 504 | .id = MAX8998_EN32KHZ_AP, |
| 505 | .ops = &max8998_others_ops, |
| 506 | .type = REGULATOR_VOLTAGE, |
| 507 | .owner = THIS_MODULE, |
| 508 | }, { |
| 509 | .name = "EN32KHz CP", |
| 510 | .id = MAX8998_EN32KHZ_CP, |
| 511 | .ops = &max8998_others_ops, |
| 512 | .type = REGULATOR_VOLTAGE, |
| 513 | .owner = THIS_MODULE, |
| 514 | }, { |
| 515 | .name = "ENVICHG", |
| 516 | .id = MAX8998_ENVICHG, |
| 517 | .ops = &max8998_others_ops, |
| 518 | .type = REGULATOR_VOLTAGE, |
| 519 | .owner = THIS_MODULE, |
| 520 | }, { |
| 521 | .name = "ESAFEOUT1", |
| 522 | .id = MAX8998_ESAFEOUT1, |
| 523 | .ops = &max8998_others_ops, |
| 524 | .type = REGULATOR_VOLTAGE, |
| 525 | .owner = THIS_MODULE, |
| 526 | }, { |
| 527 | .name = "ESAFEOUT2", |
| 528 | .id = MAX8998_ESAFEOUT2, |
| 529 | .ops = &max8998_others_ops, |
| 530 | .type = REGULATOR_VOLTAGE, |
| 531 | .owner = THIS_MODULE, |
| 532 | } |
| 533 | }; |
| 534 | |
| 535 | static __devinit int max8998_pmic_probe(struct platform_device *pdev) |
| 536 | { |
| 537 | struct max8998_dev *iodev = dev_get_drvdata(pdev->dev.parent); |
| 538 | struct max8998_platform_data *pdata = dev_get_platdata(iodev->dev); |
| 539 | struct regulator_dev **rdev; |
| 540 | struct max8998_data *max8998; |
| 541 | int i, ret, size; |
| 542 | |
| 543 | if (!pdata) { |
| 544 | dev_err(pdev->dev.parent, "No platform init data supplied\n"); |
| 545 | return -ENODEV; |
| 546 | } |
| 547 | |
| 548 | max8998 = kzalloc(sizeof(struct max8998_data), GFP_KERNEL); |
| 549 | if (!max8998) |
| 550 | return -ENOMEM; |
| 551 | |
| 552 | size = sizeof(struct regulator_dev *) * (pdata->num_regulators + 1); |
| 553 | max8998->rdev = kzalloc(size, GFP_KERNEL); |
| 554 | if (!max8998->rdev) { |
| 555 | kfree(max8998); |
| 556 | return -ENOMEM; |
| 557 | } |
| 558 | |
| 559 | rdev = max8998->rdev; |
| 560 | max8998->iodev = iodev; |
| 561 | platform_set_drvdata(pdev, max8998); |
| 562 | |
| 563 | for (i = 0; i < pdata->num_regulators; i++) { |
| 564 | const struct voltage_map_desc *desc; |
| 565 | int id = pdata->regulators[i].id; |
| 566 | int index = id - MAX8998_LDO2; |
| 567 | |
| 568 | desc = ldo_voltage_map[id]; |
| 569 | if (desc && regulators[index].ops != &max8998_others_ops) { |
| 570 | int count = (desc->max - desc->min) / desc->step + 1; |
| 571 | regulators[index].n_voltages = count; |
| 572 | } |
| 573 | rdev[i] = regulator_register(®ulators[index], max8998->dev, |
| 574 | pdata->regulators[i].initdata, max8998); |
| 575 | if (IS_ERR(rdev[i])) { |
| 576 | ret = PTR_ERR(rdev[i]); |
| 577 | dev_err(max8998->dev, "regulator init failed\n"); |
| 578 | rdev[i] = NULL; |
| 579 | goto err; |
| 580 | } |
| 581 | } |
| 582 | |
| 583 | |
| 584 | return 0; |
| 585 | err: |
| 586 | for (i = 0; i <= max8998->num_regulators; i++) |
| 587 | if (rdev[i]) |
| 588 | regulator_unregister(rdev[i]); |
| 589 | |
| 590 | kfree(max8998->rdev); |
| 591 | kfree(max8998); |
| 592 | |
| 593 | return ret; |
| 594 | } |
| 595 | |
| 596 | static int __devexit max8998_pmic_remove(struct platform_device *pdev) |
| 597 | { |
| 598 | struct max8998_data *max8998 = platform_get_drvdata(pdev); |
| 599 | struct regulator_dev **rdev = max8998->rdev; |
| 600 | int i; |
| 601 | |
| 602 | for (i = 0; i <= max8998->num_regulators; i++) |
| 603 | if (rdev[i]) |
| 604 | regulator_unregister(rdev[i]); |
| 605 | |
| 606 | kfree(max8998->rdev); |
| 607 | kfree(max8998); |
| 608 | |
| 609 | return 0; |
| 610 | } |
| 611 | |
| 612 | static struct platform_driver max8998_pmic_driver = { |
| 613 | .driver = { |
| 614 | .name = "max8998-pmic", |
| 615 | .owner = THIS_MODULE, |
| 616 | }, |
| 617 | .probe = max8998_pmic_probe, |
| 618 | .remove = __devexit_p(max8998_pmic_remove), |
| 619 | }; |
| 620 | |
| 621 | static int __init max8998_pmic_init(void) |
| 622 | { |
| 623 | return platform_driver_register(&max8998_pmic_driver); |
| 624 | } |
| 625 | subsys_initcall(max8998_pmic_init); |
| 626 | |
| 627 | static void __exit max8998_pmic_cleanup(void) |
| 628 | { |
| 629 | platform_driver_unregister(&max8998_pmic_driver); |
| 630 | } |
| 631 | module_exit(max8998_pmic_cleanup); |
| 632 | |
| 633 | MODULE_DESCRIPTION("MAXIM 8998 voltage regulator driver"); |
| 634 | MODULE_AUTHOR("Kyungmin Park <kyungmin.park@samsung.com>"); |
| 635 | MODULE_LICENSE("GPL"); |