blob: 9c4e1384f63602f3eba04b46e22e323fa4a5c90f [file] [log] [blame]
Ohad Ben-Cohen400e64d2011-10-20 16:52:46 +02001/*
2 * Remote Processor Framework
3 *
4 * Copyright(c) 2011 Texas Instruments, Inc.
5 * Copyright(c) 2011 Google, Inc.
6 * All rights reserved.
7 *
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions
10 * are met:
11 *
12 * * Redistributions of source code must retain the above copyright
13 * notice, this list of conditions and the following disclaimer.
14 * * Redistributions in binary form must reproduce the above copyright
15 * notice, this list of conditions and the following disclaimer in
16 * the documentation and/or other materials provided with the
17 * distribution.
18 * * Neither the name Texas Instruments nor the names of its
19 * contributors may be used to endorse or promote products derived
20 * from this software without specific prior written permission.
21 *
22 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
23 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
24 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
25 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
26 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
27 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
28 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
29 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
30 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
32 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
33 */
34
35#ifndef REMOTEPROC_H
36#define REMOTEPROC_H
37
38#include <linux/types.h>
Ohad Ben-Cohen400e64d2011-10-20 16:52:46 +020039#include <linux/mutex.h>
40#include <linux/virtio.h>
41#include <linux/completion.h>
Ohad Ben-Cohen7a186942012-02-13 22:30:39 +010042#include <linux/idr.h>
Dave Gerlachfec47d82015-05-22 15:45:27 -050043#include <linux/of.h>
Ohad Ben-Cohen400e64d2011-10-20 16:52:46 +020044
Ohad Ben-Cohen400e64d2011-10-20 16:52:46 +020045/**
Ohad Ben-Cohenfd2c15e2012-02-01 21:56:16 +020046 * struct resource_table - firmware resource table header
47 * @ver: version number
48 * @num: number of resource entries
49 * @reserved: reserved (must be zero)
50 * @offset: array of offsets pointing at the various resource entries
Ohad Ben-Cohen400e64d2011-10-20 16:52:46 +020051 *
Ohad Ben-Cohenfd2c15e2012-02-01 21:56:16 +020052 * A resource table is essentially a list of system resources required
53 * by the remote processor. It may also include configuration entries.
54 * If needed, the remote processor firmware should contain this table
55 * as a dedicated ".resource_table" ELF section.
Ohad Ben-Cohen400e64d2011-10-20 16:52:46 +020056 *
57 * Some resources entries are mere announcements, where the host is informed
58 * of specific remoteproc configuration. Other entries require the host to
Ohad Ben-Cohenfd2c15e2012-02-01 21:56:16 +020059 * do something (e.g. allocate a system resource). Sometimes a negotiation
60 * is expected, where the firmware requests a resource, and once allocated,
61 * the host should provide back its details (e.g. address of an allocated
62 * memory region).
Ohad Ben-Cohen400e64d2011-10-20 16:52:46 +020063 *
Ohad Ben-Cohenfd2c15e2012-02-01 21:56:16 +020064 * The header of the resource table, as expressed by this structure,
65 * contains a version number (should we need to change this format in the
66 * future), the number of available resource entries, and their offsets
67 * in the table.
68 *
69 * Immediately following this header are the resource entries themselves,
70 * each of which begins with a resource entry header (as described below).
Ohad Ben-Cohen400e64d2011-10-20 16:52:46 +020071 */
Ohad Ben-Cohenfd2c15e2012-02-01 21:56:16 +020072struct resource_table {
73 u32 ver;
74 u32 num;
75 u32 reserved[2];
76 u32 offset[0];
77} __packed;
78
79/**
80 * struct fw_rsc_hdr - firmware resource entry header
81 * @type: resource type
82 * @data: resource data
83 *
84 * Every resource entry begins with a 'struct fw_rsc_hdr' header providing
85 * its @type. The content of the entry itself will immediately follow
86 * this header, and it should be parsed according to the resource type.
87 */
88struct fw_rsc_hdr {
Ohad Ben-Cohen400e64d2011-10-20 16:52:46 +020089 u32 type;
Ohad Ben-Cohenfd2c15e2012-02-01 21:56:16 +020090 u8 data[0];
Ohad Ben-Cohen400e64d2011-10-20 16:52:46 +020091} __packed;
92
93/**
94 * enum fw_resource_type - types of resource entries
95 *
96 * @RSC_CARVEOUT: request for allocation of a physically contiguous
97 * memory region.
98 * @RSC_DEVMEM: request to iommu_map a memory-based peripheral.
99 * @RSC_TRACE: announces the availability of a trace buffer into which
Ohad Ben-Cohenfd2c15e2012-02-01 21:56:16 +0200100 * the remote processor will be writing logs.
101 * @RSC_VDEV: declare support for a virtio device, and serve as its
102 * virtio header.
Ohad Ben-Cohene12bc142012-01-31 16:07:27 +0200103 * @RSC_LAST: just keep this one at the end
Ohad Ben-Cohen400e64d2011-10-20 16:52:46 +0200104 *
Ohad Ben-Cohenfd2c15e2012-02-01 21:56:16 +0200105 * For more details regarding a specific resource type, please see its
106 * dedicated structure below.
Ohad Ben-Cohene12bc142012-01-31 16:07:27 +0200107 *
108 * Please note that these values are used as indices to the rproc_handle_rsc
109 * lookup table, so please keep them sane. Moreover, @RSC_LAST is used to
110 * check the validity of an index before the lookup table is accessed, so
111 * please update it as needed.
Ohad Ben-Cohen400e64d2011-10-20 16:52:46 +0200112 */
113enum fw_resource_type {
114 RSC_CARVEOUT = 0,
115 RSC_DEVMEM = 1,
116 RSC_TRACE = 2,
Ohad Ben-Cohenfd2c15e2012-02-01 21:56:16 +0200117 RSC_VDEV = 3,
118 RSC_LAST = 4,
Ohad Ben-Cohen400e64d2011-10-20 16:52:46 +0200119};
120
Ohad Ben-Cohenfd2c15e2012-02-01 21:56:16 +0200121#define FW_RSC_ADDR_ANY (0xFFFFFFFFFFFFFFFF)
122
123/**
124 * struct fw_rsc_carveout - physically contiguous memory request
125 * @da: device address
126 * @pa: physical address
127 * @len: length (in bytes)
128 * @flags: iommu protection flags
129 * @reserved: reserved (must be zero)
130 * @name: human-readable name of the requested memory region
131 *
132 * This resource entry requests the host to allocate a physically contiguous
133 * memory region.
134 *
135 * These request entries should precede other firmware resource entries,
136 * as other entries might request placing other data objects inside
137 * these memory regions (e.g. data/code segments, trace resource entries, ...).
138 *
139 * Allocating memory this way helps utilizing the reserved physical memory
140 * (e.g. CMA) more efficiently, and also minimizes the number of TLB entries
141 * needed to map it (in case @rproc is using an IOMMU). Reducing the TLB
142 * pressure is important; it may have a substantial impact on performance.
143 *
144 * If the firmware is compiled with static addresses, then @da should specify
145 * the expected device address of this memory region. If @da is set to
146 * FW_RSC_ADDR_ANY, then the host will dynamically allocate it, and then
147 * overwrite @da with the dynamically allocated address.
148 *
149 * We will always use @da to negotiate the device addresses, even if it
150 * isn't using an iommu. In that case, though, it will obviously contain
151 * physical addresses.
152 *
153 * Some remote processors needs to know the allocated physical address
154 * even if they do use an iommu. This is needed, e.g., if they control
155 * hardware accelerators which access the physical memory directly (this
156 * is the case with OMAP4 for instance). In that case, the host will
157 * overwrite @pa with the dynamically allocated physical address.
158 * Generally we don't want to expose physical addresses if we don't have to
159 * (remote processors are generally _not_ trusted), so we might want to
160 * change this to happen _only_ when explicitly required by the hardware.
161 *
162 * @flags is used to provide IOMMU protection flags, and @name should
163 * (optionally) contain a human readable name of this carveout region
164 * (mainly for debugging purposes).
165 */
166struct fw_rsc_carveout {
167 u32 da;
168 u32 pa;
169 u32 len;
170 u32 flags;
171 u32 reserved;
172 u8 name[32];
173} __packed;
174
175/**
176 * struct fw_rsc_devmem - iommu mapping request
177 * @da: device address
178 * @pa: physical address
179 * @len: length (in bytes)
180 * @flags: iommu protection flags
181 * @reserved: reserved (must be zero)
182 * @name: human-readable name of the requested region to be mapped
183 *
184 * This resource entry requests the host to iommu map a physically contiguous
185 * memory region. This is needed in case the remote processor requires
186 * access to certain memory-based peripherals; _never_ use it to access
187 * regular memory.
188 *
189 * This is obviously only needed if the remote processor is accessing memory
190 * via an iommu.
191 *
192 * @da should specify the required device address, @pa should specify
193 * the physical address we want to map, @len should specify the size of
194 * the mapping and @flags is the IOMMU protection flags. As always, @name may
195 * (optionally) contain a human readable name of this mapping (mainly for
196 * debugging purposes).
197 *
198 * Note: at this point we just "trust" those devmem entries to contain valid
199 * physical addresses, but this isn't safe and will be changed: eventually we
200 * want remoteproc implementations to provide us ranges of physical addresses
201 * the firmware is allowed to request, and not allow firmwares to request
202 * access to physical addresses that are outside those ranges.
203 */
204struct fw_rsc_devmem {
205 u32 da;
206 u32 pa;
207 u32 len;
208 u32 flags;
209 u32 reserved;
210 u8 name[32];
211} __packed;
212
213/**
214 * struct fw_rsc_trace - trace buffer declaration
215 * @da: device address
216 * @len: length (in bytes)
217 * @reserved: reserved (must be zero)
218 * @name: human-readable name of the trace buffer
219 *
220 * This resource entry provides the host information about a trace buffer
221 * into which the remote processor will write log messages.
222 *
223 * @da specifies the device address of the buffer, @len specifies
224 * its size, and @name may contain a human readable name of the trace buffer.
225 *
226 * After booting the remote processor, the trace buffers are exposed to the
227 * user via debugfs entries (called trace0, trace1, etc..).
228 */
229struct fw_rsc_trace {
230 u32 da;
231 u32 len;
232 u32 reserved;
233 u8 name[32];
234} __packed;
235
236/**
237 * struct fw_rsc_vdev_vring - vring descriptor entry
238 * @da: device address
239 * @align: the alignment between the consumer and producer parts of the vring
240 * @num: num of buffers supported by this vring (must be power of two)
241 * @notifyid is a unique rproc-wide notify index for this vring. This notify
242 * index is used when kicking a remote processor, to let it know that this
243 * vring is triggered.
244 * @reserved: reserved (must be zero)
245 *
246 * This descriptor is not a resource entry by itself; it is part of the
247 * vdev resource type (see below).
248 *
249 * Note that @da should either contain the device address where
250 * the remote processor is expecting the vring, or indicate that
251 * dynamically allocation of the vring's device address is supported.
252 */
253struct fw_rsc_vdev_vring {
254 u32 da;
255 u32 align;
256 u32 num;
257 u32 notifyid;
258 u32 reserved;
259} __packed;
260
261/**
262 * struct fw_rsc_vdev - virtio device header
263 * @id: virtio device id (as in virtio_ids.h)
264 * @notifyid is a unique rproc-wide notify index for this vdev. This notify
265 * index is used when kicking a remote processor, to let it know that the
266 * status/features of this vdev have changes.
267 * @dfeatures specifies the virtio device features supported by the firmware
268 * @gfeatures is a place holder used by the host to write back the
269 * negotiated features that are supported by both sides.
270 * @config_len is the size of the virtio config space of this vdev. The config
271 * space lies in the resource table immediate after this vdev header.
272 * @status is a place holder where the host will indicate its virtio progress.
273 * @num_of_vrings indicates how many vrings are described in this vdev header
274 * @reserved: reserved (must be zero)
275 * @vring is an array of @num_of_vrings entries of 'struct fw_rsc_vdev_vring'.
276 *
277 * This resource is a virtio device header: it provides information about
278 * the vdev, and is then used by the host and its peer remote processors
279 * to negotiate and share certain virtio properties.
280 *
281 * By providing this resource entry, the firmware essentially asks remoteproc
282 * to statically allocate a vdev upon registration of the rproc (dynamic vdev
283 * allocation is not yet supported).
284 *
285 * Note: unlike virtualization systems, the term 'host' here means
286 * the Linux side which is running remoteproc to control the remote
287 * processors. We use the name 'gfeatures' to comply with virtio's terms,
288 * though there isn't really any virtualized guest OS here: it's the host
289 * which is responsible for negotiating the final features.
290 * Yeah, it's a bit confusing.
291 *
292 * Note: immediately following this structure is the virtio config space for
293 * this vdev (which is specific to the vdev; for more info, read the virtio
294 * spec). the size of the config space is specified by @config_len.
295 */
296struct fw_rsc_vdev {
297 u32 id;
298 u32 notifyid;
299 u32 dfeatures;
300 u32 gfeatures;
301 u32 config_len;
302 u8 status;
303 u8 num_of_vrings;
304 u8 reserved[2];
305 struct fw_rsc_vdev_vring vring[0];
306} __packed;
307
Ohad Ben-Cohen400e64d2011-10-20 16:52:46 +0200308/**
309 * struct rproc_mem_entry - memory entry descriptor
310 * @va: virtual address
311 * @dma: dma address
312 * @len: length, in bytes
313 * @da: device address
314 * @priv: associated data
315 * @node: list node
316 */
317struct rproc_mem_entry {
318 void *va;
319 dma_addr_t dma;
320 int len;
Ohad Ben-Cohenfd2c15e2012-02-01 21:56:16 +0200321 u32 da;
Ohad Ben-Cohen400e64d2011-10-20 16:52:46 +0200322 void *priv;
323 struct list_head node;
324};
325
326struct rproc;
327
328/**
329 * struct rproc_ops - platform-specific device handlers
330 * @start: power on the device and boot it
331 * @stop: power off the device
332 * @kick: kick a virtqueue (virtqueue id given as a parameter)
Suman Annaa01f7cd2015-05-22 15:45:28 -0500333 * @da_to_va: optional platform hook to perform address translations
Ohad Ben-Cohen400e64d2011-10-20 16:52:46 +0200334 */
335struct rproc_ops {
336 int (*start)(struct rproc *rproc);
337 int (*stop)(struct rproc *rproc);
338 void (*kick)(struct rproc *rproc, int vqid);
Suman Annaa01f7cd2015-05-22 15:45:28 -0500339 void * (*da_to_va)(struct rproc *rproc, u64 da, int len);
Ohad Ben-Cohen400e64d2011-10-20 16:52:46 +0200340};
341
342/**
343 * enum rproc_state - remote processor states
344 * @RPROC_OFFLINE: device is powered off
345 * @RPROC_SUSPENDED: device is suspended; needs to be woken up to receive
346 * a message.
347 * @RPROC_RUNNING: device is up and running
348 * @RPROC_CRASHED: device has crashed; need to start recovery
349 * @RPROC_LAST: just keep this one at the end
350 *
351 * Please note that the values of these states are used as indices
352 * to rproc_state_string, a state-to-name lookup table,
353 * so please keep the two synchronized. @RPROC_LAST is used to check
354 * the validity of an index before the lookup table is accessed, so
355 * please update it as needed too.
356 */
357enum rproc_state {
358 RPROC_OFFLINE = 0,
359 RPROC_SUSPENDED = 1,
360 RPROC_RUNNING = 2,
361 RPROC_CRASHED = 3,
362 RPROC_LAST = 4,
363};
364
365/**
Fernando Guzman Lugo8afd5192012-08-30 13:26:12 -0500366 * enum rproc_crash_type - remote processor crash types
367 * @RPROC_MMUFAULT: iommu fault
368 *
369 * Each element of the enum is used as an array index. So that, the value of
370 * the elements should be always something sane.
371 *
372 * Feel free to add more types when needed.
373 */
374enum rproc_crash_type {
375 RPROC_MMUFAULT,
376};
377
378/**
Ohad Ben-Cohen400e64d2011-10-20 16:52:46 +0200379 * struct rproc - represents a physical remote processor device
Dave Gerlachfec47d82015-05-22 15:45:27 -0500380 * @node: list node of this rproc object
Ohad Ben-Cohen400e64d2011-10-20 16:52:46 +0200381 * @domain: iommu domain
382 * @name: human readable name of the rproc
383 * @firmware: name of firmware file to be loaded
384 * @priv: private data which belongs to the platform-specific rproc module
385 * @ops: platform-specific start/stop rproc handlers
Ohad Ben-Cohenb5ab5e22012-05-30 22:01:25 +0300386 * @dev: virtual device for refcounting and common remoteproc behavior
Sjur Brændeland4afc89d2012-06-19 10:08:18 +0300387 * @fw_ops: firmware-specific handlers
Ohad Ben-Cohen400e64d2011-10-20 16:52:46 +0200388 * @power: refcount of users who need this rproc powered up
389 * @state: state of the device
390 * @lock: lock which protects concurrent manipulations of the rproc
391 * @dbg_dir: debugfs directory of this rproc device
392 * @traces: list of trace buffers
393 * @num_traces: number of trace buffers
394 * @carveouts: list of physically contiguous memory allocations
395 * @mappings: list of iommu mappings we initiated, needed on shutdown
396 * @firmware_loading_complete: marks e/o asynchronous firmware loading
397 * @bootaddr: address of first instruction to boot rproc with (optional)
Ohad Ben-Cohen7a186942012-02-13 22:30:39 +0100398 * @rvdevs: list of remote virtio devices
399 * @notifyids: idr for dynamically assigning rproc-wide unique notify ids
Ohad Ben-Cohenb5ab5e22012-05-30 22:01:25 +0300400 * @index: index of this rproc device
Fernando Guzman Lugo8afd5192012-08-30 13:26:12 -0500401 * @crash_handler: workqueue for handling a crash
402 * @crash_cnt: crash counter
Fernando Guzman Lugo70b85ef2012-08-30 13:26:13 -0500403 * @crash_comp: completion used to sync crash handler and the rproc reload
Fernando Guzman Lugo2e37abb2012-09-18 12:26:35 +0300404 * @recovery_disabled: flag that state if recovery was disabled
Sjur Brændeland099a3f32012-09-18 20:32:45 +0200405 * @max_notifyid: largest allocated notify id.
Ohad Ben-Cohena2b950a2013-04-07 14:06:07 +0300406 * @table_ptr: pointer to the resource table in effect
407 * @cached_table: copy of the resource table
408 * @table_csum: checksum of the resource table
Suman Anna315491e2015-01-09 15:21:58 -0600409 * @has_iommu: flag to indicate if remote processor is behind an MMU
Ohad Ben-Cohen400e64d2011-10-20 16:52:46 +0200410 */
411struct rproc {
Dave Gerlachfec47d82015-05-22 15:45:27 -0500412 struct list_head node;
Ohad Ben-Cohen400e64d2011-10-20 16:52:46 +0200413 struct iommu_domain *domain;
414 const char *name;
415 const char *firmware;
416 void *priv;
417 const struct rproc_ops *ops;
Ohad Ben-Cohenb5ab5e22012-05-30 22:01:25 +0300418 struct device dev;
Sjur Brændeland4afc89d2012-06-19 10:08:18 +0300419 const struct rproc_fw_ops *fw_ops;
Ohad Ben-Cohen400e64d2011-10-20 16:52:46 +0200420 atomic_t power;
421 unsigned int state;
422 struct mutex lock;
423 struct dentry *dbg_dir;
424 struct list_head traces;
425 int num_traces;
426 struct list_head carveouts;
427 struct list_head mappings;
428 struct completion firmware_loading_complete;
Ohad Ben-Cohenfd2c15e2012-02-01 21:56:16 +0200429 u32 bootaddr;
Ohad Ben-Cohen7a186942012-02-13 22:30:39 +0100430 struct list_head rvdevs;
431 struct idr notifyids;
Ohad Ben-Cohenb5ab5e22012-05-30 22:01:25 +0300432 int index;
Fernando Guzman Lugo8afd5192012-08-30 13:26:12 -0500433 struct work_struct crash_handler;
434 unsigned crash_cnt;
Fernando Guzman Lugo70b85ef2012-08-30 13:26:13 -0500435 struct completion crash_comp;
Fernando Guzman Lugo2e37abb2012-09-18 12:26:35 +0300436 bool recovery_disabled;
Sjur Brændeland099a3f32012-09-18 20:32:45 +0200437 int max_notifyid;
Ohad Ben-Cohena2b950a2013-04-07 14:06:07 +0300438 struct resource_table *table_ptr;
439 struct resource_table *cached_table;
440 u32 table_csum;
Suman Anna315491e2015-01-09 15:21:58 -0600441 bool has_iommu;
Ohad Ben-Cohen7a186942012-02-13 22:30:39 +0100442};
443
444/* we currently support only two vrings per rvdev */
Ohad Ben-Cohena2b950a2013-04-07 14:06:07 +0300445
Ohad Ben-Cohen7a186942012-02-13 22:30:39 +0100446#define RVDEV_NUM_VRINGS 2
447
448/**
449 * struct rproc_vring - remoteproc vring state
450 * @va: virtual address
451 * @dma: dma address
452 * @len: length, in bytes
453 * @da: device address
Ohad Ben-Cohen63140e02012-02-29 14:42:13 +0200454 * @align: vring alignment
Ohad Ben-Cohen7a186942012-02-13 22:30:39 +0100455 * @notifyid: rproc-specific unique vring index
456 * @rvdev: remote vdev
457 * @vq: the virtqueue of this vring
458 */
459struct rproc_vring {
460 void *va;
461 dma_addr_t dma;
462 int len;
463 u32 da;
Ohad Ben-Cohen63140e02012-02-29 14:42:13 +0200464 u32 align;
Ohad Ben-Cohen7a186942012-02-13 22:30:39 +0100465 int notifyid;
Ohad Ben-Cohen400e64d2011-10-20 16:52:46 +0200466 struct rproc_vdev *rvdev;
Ohad Ben-Cohen7a186942012-02-13 22:30:39 +0100467 struct virtqueue *vq;
Ohad Ben-Cohen400e64d2011-10-20 16:52:46 +0200468};
469
470/**
471 * struct rproc_vdev - remoteproc state for a supported virtio device
Ohad Ben-Cohen7a186942012-02-13 22:30:39 +0100472 * @node: list node
Ohad Ben-Cohen400e64d2011-10-20 16:52:46 +0200473 * @rproc: the rproc handle
474 * @vdev: the virio device
Ohad Ben-Cohen400e64d2011-10-20 16:52:46 +0200475 * @vring: the vrings for this vdev
Ohad Ben-Cohena2b950a2013-04-07 14:06:07 +0300476 * @rsc_offset: offset of the vdev's resource entry
Ohad Ben-Cohen400e64d2011-10-20 16:52:46 +0200477 */
478struct rproc_vdev {
Ohad Ben-Cohen7a186942012-02-13 22:30:39 +0100479 struct list_head node;
Ohad Ben-Cohen400e64d2011-10-20 16:52:46 +0200480 struct rproc *rproc;
481 struct virtio_device vdev;
Ohad Ben-Cohen7a186942012-02-13 22:30:39 +0100482 struct rproc_vring vring[RVDEV_NUM_VRINGS];
Ohad Ben-Cohena2b950a2013-04-07 14:06:07 +0300483 u32 rsc_offset;
Ohad Ben-Cohen400e64d2011-10-20 16:52:46 +0200484};
485
Dave Gerlachfec47d82015-05-22 15:45:27 -0500486struct rproc *rproc_get_by_phandle(phandle phandle);
Ohad Ben-Cohen400e64d2011-10-20 16:52:46 +0200487struct rproc *rproc_alloc(struct device *dev, const char *name,
488 const struct rproc_ops *ops,
489 const char *firmware, int len);
Ohad Ben-Cohen160e7c82012-07-04 16:25:06 +0300490void rproc_put(struct rproc *rproc);
491int rproc_add(struct rproc *rproc);
492int rproc_del(struct rproc *rproc);
Ohad Ben-Cohen400e64d2011-10-20 16:52:46 +0200493
494int rproc_boot(struct rproc *rproc);
495void rproc_shutdown(struct rproc *rproc);
Fernando Guzman Lugo8afd5192012-08-30 13:26:12 -0500496void rproc_report_crash(struct rproc *rproc, enum rproc_crash_type type);
Ohad Ben-Cohen400e64d2011-10-20 16:52:46 +0200497
Ohad Ben-Cohen7a186942012-02-13 22:30:39 +0100498static inline struct rproc_vdev *vdev_to_rvdev(struct virtio_device *vdev)
499{
500 return container_of(vdev, struct rproc_vdev, vdev);
501}
502
Ohad Ben-Cohen400e64d2011-10-20 16:52:46 +0200503static inline struct rproc *vdev_to_rproc(struct virtio_device *vdev)
504{
Ohad Ben-Cohen7a186942012-02-13 22:30:39 +0100505 struct rproc_vdev *rvdev = vdev_to_rvdev(vdev);
Ohad Ben-Cohen400e64d2011-10-20 16:52:46 +0200506
507 return rvdev->rproc;
508}
509
510#endif /* REMOTEPROC_H */