blob: 92679df6d6e222dd12e4f2471f9e1b3109048c50 [file] [log] [blame]
Piotr Ziecik1ce7c832009-12-15 16:46:12 -08001/*
2 * Driver for TI BQ32000 RTC.
3 *
4 * Copyright (C) 2009 Semihalf.
Pavel Machek765a98a2014-10-13 15:52:50 -07005 * Copyright (C) 2014 Pavel Machek <pavel@denx.de>
Piotr Ziecik1ce7c832009-12-15 16:46:12 -08006 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
Pavel Machek765a98a2014-10-13 15:52:50 -070010 *
11 * You can get hardware description at
12 * http://www.ti.com/lit/ds/symlink/bq32000.pdf
Piotr Ziecik1ce7c832009-12-15 16:46:12 -080013 */
14
15#include <linux/module.h>
16#include <linux/i2c.h>
17#include <linux/rtc.h>
18#include <linux/init.h>
19#include <linux/errno.h>
20#include <linux/bcd.h>
21
22#define BQ32K_SECONDS 0x00 /* Seconds register address */
23#define BQ32K_SECONDS_MASK 0x7F /* Mask over seconds value */
24#define BQ32K_STOP 0x80 /* Oscillator Stop flat */
25
26#define BQ32K_MINUTES 0x01 /* Minutes register address */
27#define BQ32K_MINUTES_MASK 0x7F /* Mask over minutes value */
28#define BQ32K_OF 0x80 /* Oscillator Failure flag */
29
30#define BQ32K_HOURS_MASK 0x3F /* Mask over hours value */
31#define BQ32K_CENT 0x40 /* Century flag */
32#define BQ32K_CENT_EN 0x80 /* Century flag enable bit */
33
Pavel Machek765a98a2014-10-13 15:52:50 -070034#define BQ32K_CALIBRATION 0x07 /* CAL_CFG1, calibration and control */
35#define BQ32K_TCH2 0x08 /* Trickle charge enable */
36#define BQ32K_CFG2 0x09 /* Trickle charger control */
37
Piotr Ziecik1ce7c832009-12-15 16:46:12 -080038struct bq32k_regs {
39 uint8_t seconds;
40 uint8_t minutes;
41 uint8_t cent_hours;
42 uint8_t day;
43 uint8_t date;
44 uint8_t month;
45 uint8_t years;
46};
47
48static struct i2c_driver bq32k_driver;
49
50static int bq32k_read(struct device *dev, void *data, uint8_t off, uint8_t len)
51{
52 struct i2c_client *client = to_i2c_client(dev);
53 struct i2c_msg msgs[] = {
54 {
55 .addr = client->addr,
56 .flags = 0,
57 .len = 1,
58 .buf = &off,
59 }, {
60 .addr = client->addr,
61 .flags = I2C_M_RD,
62 .len = len,
63 .buf = data,
64 }
65 };
66
67 if (i2c_transfer(client->adapter, msgs, 2) == 2)
68 return 0;
69
70 return -EIO;
71}
72
73static int bq32k_write(struct device *dev, void *data, uint8_t off, uint8_t len)
74{
75 struct i2c_client *client = to_i2c_client(dev);
76 uint8_t buffer[len + 1];
77
78 buffer[0] = off;
79 memcpy(&buffer[1], data, len);
80
81 if (i2c_master_send(client, buffer, len + 1) == len + 1)
82 return 0;
83
84 return -EIO;
85}
86
87static int bq32k_rtc_read_time(struct device *dev, struct rtc_time *tm)
88{
89 struct bq32k_regs regs;
90 int error;
91
92 error = bq32k_read(dev, &regs, 0, sizeof(regs));
93 if (error)
94 return error;
95
96 tm->tm_sec = bcd2bin(regs.seconds & BQ32K_SECONDS_MASK);
97 tm->tm_min = bcd2bin(regs.minutes & BQ32K_SECONDS_MASK);
98 tm->tm_hour = bcd2bin(regs.cent_hours & BQ32K_HOURS_MASK);
99 tm->tm_mday = bcd2bin(regs.date);
100 tm->tm_wday = bcd2bin(regs.day) - 1;
101 tm->tm_mon = bcd2bin(regs.month) - 1;
102 tm->tm_year = bcd2bin(regs.years) +
103 ((regs.cent_hours & BQ32K_CENT) ? 100 : 0);
104
105 return rtc_valid_tm(tm);
106}
107
108static int bq32k_rtc_set_time(struct device *dev, struct rtc_time *tm)
109{
110 struct bq32k_regs regs;
111
112 regs.seconds = bin2bcd(tm->tm_sec);
113 regs.minutes = bin2bcd(tm->tm_min);
114 regs.cent_hours = bin2bcd(tm->tm_hour) | BQ32K_CENT_EN;
115 regs.day = bin2bcd(tm->tm_wday + 1);
116 regs.date = bin2bcd(tm->tm_mday);
117 regs.month = bin2bcd(tm->tm_mon + 1);
118
119 if (tm->tm_year >= 100) {
120 regs.cent_hours |= BQ32K_CENT;
121 regs.years = bin2bcd(tm->tm_year - 100);
122 } else
123 regs.years = bin2bcd(tm->tm_year);
124
125 return bq32k_write(dev, &regs, 0, sizeof(regs));
126}
127
128static const struct rtc_class_ops bq32k_rtc_ops = {
129 .read_time = bq32k_rtc_read_time,
130 .set_time = bq32k_rtc_set_time,
131};
132
Pavel Machek765a98a2014-10-13 15:52:50 -0700133static int trickle_charger_of_init(struct device *dev, struct device_node *node)
134{
135 unsigned char reg;
136 int error;
137 u32 ohms = 0;
138
139 if (of_property_read_u32(node, "trickle-resistor-ohms" , &ohms))
140 return 0;
141
142 switch (ohms) {
143 case 180+940:
144 /*
145 * TCHE[3:0] == 0x05, TCH2 == 1, TCFE == 0 (charging
146 * over diode and 940ohm resistor)
147 */
148
149 if (of_property_read_bool(node, "trickle-diode-disable")) {
150 dev_err(dev, "diode and resistor mismatch\n");
151 return -EINVAL;
152 }
153 reg = 0x05;
154 break;
155
156 case 180+20000:
157 /* diode disabled */
158
159 if (!of_property_read_bool(node, "trickle-diode-disable")) {
160 dev_err(dev, "bq32k: diode and resistor mismatch\n");
161 return -EINVAL;
162 }
Pavel Machek5a6e75992014-10-29 14:50:42 -0700163 reg = 0x45;
Pavel Machek765a98a2014-10-13 15:52:50 -0700164 break;
165
166 default:
167 dev_err(dev, "invalid resistor value (%d)\n", ohms);
168 return -EINVAL;
169 }
170
171 error = bq32k_write(dev, &reg, BQ32K_CFG2, 1);
172 if (error)
173 return error;
174
175 reg = 0x20;
176 error = bq32k_write(dev, &reg, BQ32K_TCH2, 1);
177 if (error)
178 return error;
179
180 dev_info(dev, "Enabled trickle RTC battery charge.\n");
181 return 0;
182}
183
Piotr Ziecik1ce7c832009-12-15 16:46:12 -0800184static int bq32k_probe(struct i2c_client *client,
185 const struct i2c_device_id *id)
186{
187 struct device *dev = &client->dev;
188 struct rtc_device *rtc;
189 uint8_t reg;
190 int error;
191
192 if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
193 return -ENODEV;
194
195 /* Check Oscillator Stop flag */
196 error = bq32k_read(dev, &reg, BQ32K_SECONDS, 1);
197 if (!error && (reg & BQ32K_STOP)) {
198 dev_warn(dev, "Oscillator was halted. Restarting...\n");
199 reg &= ~BQ32K_STOP;
200 error = bq32k_write(dev, &reg, BQ32K_SECONDS, 1);
201 }
202 if (error)
203 return error;
204
205 /* Check Oscillator Failure flag */
206 error = bq32k_read(dev, &reg, BQ32K_MINUTES, 1);
207 if (!error && (reg & BQ32K_OF)) {
208 dev_warn(dev, "Oscillator Failure. Check RTC battery.\n");
209 reg &= ~BQ32K_OF;
210 error = bq32k_write(dev, &reg, BQ32K_MINUTES, 1);
211 }
212 if (error)
213 return error;
214
Pavel Machek765a98a2014-10-13 15:52:50 -0700215 if (client && client->dev.of_node)
216 trickle_charger_of_init(dev, client->dev.of_node);
217
Jingoo Han4e440682013-04-29 16:19:31 -0700218 rtc = devm_rtc_device_register(&client->dev, bq32k_driver.driver.name,
Piotr Ziecik1ce7c832009-12-15 16:46:12 -0800219 &bq32k_rtc_ops, THIS_MODULE);
220 if (IS_ERR(rtc))
221 return PTR_ERR(rtc);
222
223 i2c_set_clientdata(client, rtc);
224
225 return 0;
226}
227
Piotr Ziecik1ce7c832009-12-15 16:46:12 -0800228static const struct i2c_device_id bq32k_id[] = {
229 { "bq32000", 0 },
230 { }
231};
232MODULE_DEVICE_TABLE(i2c, bq32k_id);
233
234static struct i2c_driver bq32k_driver = {
235 .driver = {
236 .name = "bq32k",
237 .owner = THIS_MODULE,
238 },
239 .probe = bq32k_probe,
Piotr Ziecik1ce7c832009-12-15 16:46:12 -0800240 .id_table = bq32k_id,
241};
242
Axel Lin0abc9202012-03-23 15:02:31 -0700243module_i2c_driver(bq32k_driver);
Piotr Ziecik1ce7c832009-12-15 16:46:12 -0800244
245MODULE_AUTHOR("Semihalf, Piotr Ziecik <kosmo@semihalf.com>");
246MODULE_DESCRIPTION("TI BQ32000 I2C RTC driver");
247MODULE_LICENSE("GPL");