blob: de8d9c4277826ca1e1e830e7dbdbea59a6a6a6ed [file] [log] [blame]
Martyn Welcha7fa9852008-11-12 13:27:06 -08001/*
2 * An I2C driver for the Epson RX8581 RTC
3 *
Martyn Welch9756c4d2010-04-14 09:24:16 +01004 * Author: Martyn Welch <martyn.welch@ge.com>
5 * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
Martyn Welcha7fa9852008-11-12 13:27:06 -08006 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
10 *
11 * Based on: rtc-pcf8563.c (An I2C driver for the Philips PCF8563 RTC)
12 * Copyright 2005-06 Tower Technologies
13 */
14
15#include <linux/module.h>
16#include <linux/i2c.h>
17#include <linux/bcd.h>
18#include <linux/rtc.h>
19#include <linux/log2.h>
20
21#define DRV_VERSION "0.1"
22
23#define RX8581_REG_SC 0x00 /* Second in BCD */
24#define RX8581_REG_MN 0x01 /* Minute in BCD */
25#define RX8581_REG_HR 0x02 /* Hour in BCD */
26#define RX8581_REG_DW 0x03 /* Day of Week */
27#define RX8581_REG_DM 0x04 /* Day of Month in BCD */
28#define RX8581_REG_MO 0x05 /* Month in BCD */
29#define RX8581_REG_YR 0x06 /* Year in BCD */
30#define RX8581_REG_RAM 0x07 /* RAM */
31#define RX8581_REG_AMN 0x08 /* Alarm Min in BCD*/
32#define RX8581_REG_AHR 0x09 /* Alarm Hour in BCD */
33#define RX8581_REG_ADM 0x0A
34#define RX8581_REG_ADW 0x0A
35#define RX8581_REG_TMR0 0x0B
36#define RX8581_REG_TMR1 0x0C
37#define RX8581_REG_EXT 0x0D /* Extension Register */
38#define RX8581_REG_FLAG 0x0E /* Flag Register */
39#define RX8581_REG_CTRL 0x0F /* Control Register */
40
41
42/* Flag Register bit definitions */
43#define RX8581_FLAG_UF 0x20 /* Update */
44#define RX8581_FLAG_TF 0x10 /* Timer */
45#define RX8581_FLAG_AF 0x08 /* Alarm */
46#define RX8581_FLAG_VLF 0x02 /* Voltage Low */
47
48/* Control Register bit definitions */
49#define RX8581_CTRL_UIE 0x20 /* Update Interrupt Enable */
50#define RX8581_CTRL_TIE 0x10 /* Timer Interrupt Enable */
51#define RX8581_CTRL_AIE 0x08 /* Alarm Interrupt Enable */
52#define RX8581_CTRL_STOP 0x02 /* STOP bit */
53#define RX8581_CTRL_RESET 0x01 /* RESET bit */
54
Andreas Wernerd643a492014-01-23 15:55:20 -080055struct rx8581 {
56 struct i2c_client *client;
57 struct rtc_device *rtc;
58 s32 (*read_block_data)(const struct i2c_client *client, u8 command,
59 u8 length, u8 *values);
60 s32 (*write_block_data)(const struct i2c_client *client, u8 command,
61 u8 length, const u8 *values);
62};
63
Martyn Welcha7fa9852008-11-12 13:27:06 -080064static struct i2c_driver rx8581_driver;
65
Andreas Wernerd643a492014-01-23 15:55:20 -080066static int rx8581_read_block_data(const struct i2c_client *client, u8 command,
67 u8 length, u8 *values)
68{
69 s32 i, data;
70
71 for (i = 0; i < length; i++) {
72 data = i2c_smbus_read_byte_data(client, command + i);
73 if (data < 0)
74 return data;
75 values[i] = data;
76 }
77 return i;
78}
79
80static int rx8581_write_block_data(const struct i2c_client *client, u8 command,
81 u8 length, const u8 *values)
82{
83 s32 i, ret;
84
85 for (i = 0; i < length; i++) {
86 ret = i2c_smbus_write_byte_data(client, command + i,
87 values[i]);
88 if (ret < 0)
89 return ret;
90 }
91 return length;
92}
93
Martyn Welcha7fa9852008-11-12 13:27:06 -080094/*
95 * In the routines that deal directly with the rx8581 hardware, we use
96 * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch.
97 */
98static int rx8581_get_datetime(struct i2c_client *client, struct rtc_time *tm)
99{
100 unsigned char date[7];
101 int data, err;
Andreas Wernerd643a492014-01-23 15:55:20 -0800102 struct rx8581 *rx8581 = i2c_get_clientdata(client);
Martyn Welcha7fa9852008-11-12 13:27:06 -0800103
104 /* First we ensure that the "update flag" is not set, we read the
105 * time and date then re-read the "update flag". If the update flag
106 * has been set, we know that the time has changed during the read so
107 * we repeat the whole process again.
108 */
109 data = i2c_smbus_read_byte_data(client, RX8581_REG_FLAG);
110 if (data < 0) {
111 dev_err(&client->dev, "Unable to read device flags\n");
112 return -EIO;
113 }
114
115 do {
116 /* If update flag set, clear it */
117 if (data & RX8581_FLAG_UF) {
118 err = i2c_smbus_write_byte_data(client,
119 RX8581_REG_FLAG, (data & ~RX8581_FLAG_UF));
120 if (err != 0) {
Andreas Wernerd643a492014-01-23 15:55:20 -0800121 dev_err(&client->dev, "Unable to write device flags\n");
Martyn Welcha7fa9852008-11-12 13:27:06 -0800122 return -EIO;
123 }
124 }
125
126 /* Now read time and date */
Andreas Wernerd643a492014-01-23 15:55:20 -0800127 err = rx8581->read_block_data(client, RX8581_REG_SC,
Martyn Welcha7fa9852008-11-12 13:27:06 -0800128 7, date);
129 if (err < 0) {
130 dev_err(&client->dev, "Unable to read date\n");
131 return -EIO;
132 }
133
134 /* Check flag register */
135 data = i2c_smbus_read_byte_data(client, RX8581_REG_FLAG);
136 if (data < 0) {
137 dev_err(&client->dev, "Unable to read device flags\n");
138 return -EIO;
139 }
140 } while (data & RX8581_FLAG_UF);
141
142 if (data & RX8581_FLAG_VLF)
143 dev_info(&client->dev,
144 "low voltage detected, date/time is not reliable.\n");
145
146 dev_dbg(&client->dev,
147 "%s: raw data is sec=%02x, min=%02x, hr=%02x, "
148 "wday=%02x, mday=%02x, mon=%02x, year=%02x\n",
149 __func__,
150 date[0], date[1], date[2], date[3], date[4], date[5], date[6]);
151
152 tm->tm_sec = bcd2bin(date[RX8581_REG_SC] & 0x7F);
153 tm->tm_min = bcd2bin(date[RX8581_REG_MN] & 0x7F);
154 tm->tm_hour = bcd2bin(date[RX8581_REG_HR] & 0x3F); /* rtc hr 0-23 */
155 tm->tm_wday = ilog2(date[RX8581_REG_DW] & 0x7F);
156 tm->tm_mday = bcd2bin(date[RX8581_REG_DM] & 0x3F);
157 tm->tm_mon = bcd2bin(date[RX8581_REG_MO] & 0x1F) - 1; /* rtc mn 1-12 */
158 tm->tm_year = bcd2bin(date[RX8581_REG_YR]);
159 if (tm->tm_year < 70)
160 tm->tm_year += 100; /* assume we are in 1970...2069 */
161
162
163 dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
164 "mday=%d, mon=%d, year=%d, wday=%d\n",
165 __func__,
166 tm->tm_sec, tm->tm_min, tm->tm_hour,
167 tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
168
169 err = rtc_valid_tm(tm);
170 if (err < 0)
171 dev_err(&client->dev, "retrieved date/time is not valid.\n");
172
173 return err;
174}
175
176static int rx8581_set_datetime(struct i2c_client *client, struct rtc_time *tm)
177{
178 int data, err;
179 unsigned char buf[7];
Andreas Wernerd643a492014-01-23 15:55:20 -0800180 struct rx8581 *rx8581 = i2c_get_clientdata(client);
Martyn Welcha7fa9852008-11-12 13:27:06 -0800181
182 dev_dbg(&client->dev, "%s: secs=%d, mins=%d, hours=%d, "
183 "mday=%d, mon=%d, year=%d, wday=%d\n",
184 __func__,
185 tm->tm_sec, tm->tm_min, tm->tm_hour,
186 tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
187
188 /* hours, minutes and seconds */
189 buf[RX8581_REG_SC] = bin2bcd(tm->tm_sec);
190 buf[RX8581_REG_MN] = bin2bcd(tm->tm_min);
191 buf[RX8581_REG_HR] = bin2bcd(tm->tm_hour);
192
193 buf[RX8581_REG_DM] = bin2bcd(tm->tm_mday);
194
195 /* month, 1 - 12 */
196 buf[RX8581_REG_MO] = bin2bcd(tm->tm_mon + 1);
197
198 /* year and century */
199 buf[RX8581_REG_YR] = bin2bcd(tm->tm_year % 100);
200 buf[RX8581_REG_DW] = (0x1 << tm->tm_wday);
201
202 /* Stop the clock */
203 data = i2c_smbus_read_byte_data(client, RX8581_REG_CTRL);
204 if (data < 0) {
205 dev_err(&client->dev, "Unable to read control register\n");
206 return -EIO;
207 }
208
Rudolf Marek2884fce2010-07-27 13:18:02 -0700209 err = i2c_smbus_write_byte_data(client, RX8581_REG_CTRL,
Martyn Welcha7fa9852008-11-12 13:27:06 -0800210 (data | RX8581_CTRL_STOP));
211 if (err < 0) {
212 dev_err(&client->dev, "Unable to write control register\n");
213 return -EIO;
214 }
215
216 /* write register's data */
Andreas Wernerd643a492014-01-23 15:55:20 -0800217 err = rx8581->write_block_data(client, RX8581_REG_SC, 7, buf);
Martyn Welcha7fa9852008-11-12 13:27:06 -0800218 if (err < 0) {
219 dev_err(&client->dev, "Unable to write to date registers\n");
220 return -EIO;
221 }
222
Rudolf Marek2884fce2010-07-27 13:18:02 -0700223 /* get VLF and clear it */
224 data = i2c_smbus_read_byte_data(client, RX8581_REG_FLAG);
225 if (data < 0) {
226 dev_err(&client->dev, "Unable to read flag register\n");
227 return -EIO;
228 }
229
230 err = i2c_smbus_write_byte_data(client, RX8581_REG_FLAG,
231 (data & ~(RX8581_FLAG_VLF)));
232 if (err != 0) {
233 dev_err(&client->dev, "Unable to write flag register\n");
234 return -EIO;
235 }
236
Martyn Welcha7fa9852008-11-12 13:27:06 -0800237 /* Restart the clock */
238 data = i2c_smbus_read_byte_data(client, RX8581_REG_CTRL);
239 if (data < 0) {
240 dev_err(&client->dev, "Unable to read control register\n");
241 return -EIO;
242 }
243
Rudolf Marek2884fce2010-07-27 13:18:02 -0700244 err = i2c_smbus_write_byte_data(client, RX8581_REG_CTRL,
245 (data & ~(RX8581_CTRL_STOP)));
Martyn Welcha7fa9852008-11-12 13:27:06 -0800246 if (err != 0) {
247 dev_err(&client->dev, "Unable to write control register\n");
248 return -EIO;
249 }
250
251 return 0;
252}
253
254static int rx8581_rtc_read_time(struct device *dev, struct rtc_time *tm)
255{
256 return rx8581_get_datetime(to_i2c_client(dev), tm);
257}
258
259static int rx8581_rtc_set_time(struct device *dev, struct rtc_time *tm)
260{
261 return rx8581_set_datetime(to_i2c_client(dev), tm);
262}
263
264static const struct rtc_class_ops rx8581_rtc_ops = {
265 .read_time = rx8581_rtc_read_time,
266 .set_time = rx8581_rtc_set_time,
267};
268
Greg Kroah-Hartman5a167f42012-12-21 13:09:38 -0800269static int rx8581_probe(struct i2c_client *client,
270 const struct i2c_device_id *id)
Martyn Welcha7fa9852008-11-12 13:27:06 -0800271{
Andreas Wernerd643a492014-01-23 15:55:20 -0800272 struct rx8581 *rx8581;
Martyn Welcha7fa9852008-11-12 13:27:06 -0800273
274 dev_dbg(&client->dev, "%s\n", __func__);
275
Andreas Wernerd643a492014-01-23 15:55:20 -0800276 if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)
277 && !i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_I2C_BLOCK))
278 return -EIO;
279
280 rx8581 = devm_kzalloc(&client->dev, sizeof(struct rx8581), GFP_KERNEL);
281 if (!rx8581)
282 return -ENOMEM;
283
284 i2c_set_clientdata(client, rx8581);
285 rx8581->client = client;
286
287 if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_I2C_BLOCK)) {
288 rx8581->read_block_data = i2c_smbus_read_i2c_block_data;
289 rx8581->write_block_data = i2c_smbus_write_i2c_block_data;
290 } else {
291 rx8581->read_block_data = rx8581_read_block_data;
292 rx8581->write_block_data = rx8581_write_block_data;
293 }
Martyn Welcha7fa9852008-11-12 13:27:06 -0800294
295 dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n");
296
Andreas Wernerd643a492014-01-23 15:55:20 -0800297 rx8581->rtc = devm_rtc_device_register(&client->dev,
298 rx8581_driver.driver.name, &rx8581_rtc_ops, THIS_MODULE);
Martyn Welcha7fa9852008-11-12 13:27:06 -0800299
Andreas Wernerd643a492014-01-23 15:55:20 -0800300 if (IS_ERR(rx8581->rtc)) {
301 dev_err(&client->dev,
302 "unable to register the class device\n");
303 return PTR_ERR(rx8581->rtc);
304 }
Martyn Welcha7fa9852008-11-12 13:27:06 -0800305
306 return 0;
307}
308
Martyn Welcha7fa9852008-11-12 13:27:06 -0800309static const struct i2c_device_id rx8581_id[] = {
310 { "rx8581", 0 },
311 { }
312};
313MODULE_DEVICE_TABLE(i2c, rx8581_id);
314
315static struct i2c_driver rx8581_driver = {
316 .driver = {
317 .name = "rtc-rx8581",
318 .owner = THIS_MODULE,
319 },
320 .probe = rx8581_probe,
Martyn Welcha7fa9852008-11-12 13:27:06 -0800321 .id_table = rx8581_id,
322};
323
Axel Lin0abc9202012-03-23 15:02:31 -0700324module_i2c_driver(rx8581_driver);
Martyn Welcha7fa9852008-11-12 13:27:06 -0800325
Martyn Welch9756c4d2010-04-14 09:24:16 +0100326MODULE_AUTHOR("Martyn Welch <martyn.welch@ge.com>");
Martyn Welcha7fa9852008-11-12 13:27:06 -0800327MODULE_DESCRIPTION("Epson RX-8581 RTC driver");
328MODULE_LICENSE("GPL");
329MODULE_VERSION(DRV_VERSION);