blob: 48ee6943bf35af8d463ee4d6f05254a3bbd1da79 [file] [log] [blame]
Michael Bueschc604e852007-10-09 23:47:17 -07001/*
2 * Sonics Silicon Backplane
3 * Broadcom USB-core OHCI driver
4 *
5 * Copyright 2007 Michael Buesch <mb@bu3sch.de>
6 *
7 * Derived from the OHCI-PCI driver
8 * Copyright 1999 Roman Weissgaerber
9 * Copyright 2000-2002 David Brownell
10 * Copyright 1999 Linus Torvalds
11 * Copyright 1999 Gregory P. Smith
12 *
13 * Derived from the USBcore related parts of Broadcom-SB
14 * Copyright 2005 Broadcom Corporation
15 *
16 * Licensed under the GNU/GPL. See COPYING for details.
17 */
18#include <linux/ssb/ssb.h>
19
20
21#define SSB_OHCI_TMSLOW_HOSTMODE (1 << 29)
22
23struct ssb_ohci_device {
24 struct ohci_hcd ohci; /* _must_ be at the beginning. */
25
26 u32 enable_flags;
27};
28
29static inline
30struct ssb_ohci_device *hcd_to_ssb_ohci(struct usb_hcd *hcd)
31{
32 return (struct ssb_ohci_device *)(hcd->hcd_priv);
33}
34
35
36static int ssb_ohci_reset(struct usb_hcd *hcd)
37{
38 struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
39 struct ohci_hcd *ohci = &ohcidev->ohci;
40 int err;
41
42 ohci_hcd_init(ohci);
43 err = ohci_init(ohci);
44
45 return err;
46}
47
48static int ssb_ohci_start(struct usb_hcd *hcd)
49{
50 struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
51 struct ohci_hcd *ohci = &ohcidev->ohci;
52 int err;
53
54 err = ohci_run(ohci);
55 if (err < 0) {
56 ohci_err(ohci, "can't start\n");
57 ohci_stop(hcd);
58 }
59
60 return err;
61}
62
Michael Bueschc604e852007-10-09 23:47:17 -070063static const struct hc_driver ssb_ohci_hc_driver = {
64 .description = "ssb-usb-ohci",
65 .product_desc = "SSB OHCI Controller",
66 .hcd_priv_size = sizeof(struct ssb_ohci_device),
67
68 .irq = ohci_irq,
69 .flags = HCD_MEMORY | HCD_USB11,
70
71 .reset = ssb_ohci_reset,
72 .start = ssb_ohci_start,
73 .stop = ohci_stop,
74 .shutdown = ohci_shutdown,
75
Michael Bueschc604e852007-10-09 23:47:17 -070076 .urb_enqueue = ohci_urb_enqueue,
77 .urb_dequeue = ohci_urb_dequeue,
78 .endpoint_disable = ohci_endpoint_disable,
79
80 .get_frame_number = ohci_get_frame,
81
82 .hub_status_data = ohci_hub_status_data,
83 .hub_control = ohci_hub_control,
Al Viro4735b372007-10-13 22:29:47 +010084#ifdef CONFIG_PM
Michael Bueschc604e852007-10-09 23:47:17 -070085 .bus_suspend = ohci_bus_suspend,
86 .bus_resume = ohci_bus_resume,
Al Viro4735b372007-10-13 22:29:47 +010087#endif
Michael Bueschc604e852007-10-09 23:47:17 -070088
89 .start_port_reset = ohci_start_port_reset,
90};
91
92static void ssb_ohci_detach(struct ssb_device *dev)
93{
94 struct usb_hcd *hcd = ssb_get_drvdata(dev);
95
Hauke Mehrtensf2402f22010-07-28 22:11:35 +020096 if (hcd->driver->shutdown)
97 hcd->driver->shutdown(hcd);
Michael Bueschc604e852007-10-09 23:47:17 -070098 usb_remove_hcd(hcd);
99 iounmap(hcd->regs);
Hauke Mehrtensf2402f22010-07-28 22:11:35 +0200100 release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
Michael Bueschc604e852007-10-09 23:47:17 -0700101 usb_put_hcd(hcd);
102 ssb_device_disable(dev, 0);
103}
104
105static int ssb_ohci_attach(struct ssb_device *dev)
106{
107 struct ssb_ohci_device *ohcidev;
108 struct usb_hcd *hcd;
109 int err = -ENOMEM;
110 u32 tmp, flags = 0;
111
Hauke Mehrtensf2402f22010-07-28 22:11:35 +0200112 if (dma_set_mask(dev->dma_dev, DMA_BIT_MASK(32)) ||
113 dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32)))
114 return -EOPNOTSUPP;
Michael Bueschc604e852007-10-09 23:47:17 -0700115
Hauke Mehrtensf2402f22010-07-28 22:11:35 +0200116 if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV) {
117 /* Put the device into host-mode. */
118 flags |= SSB_OHCI_TMSLOW_HOSTMODE;
119 ssb_device_enable(dev, flags);
120 } else if (dev->id.coreid == SSB_DEV_USB20_HOST) {
121 /*
122 * USB 2.0 special considerations:
123 *
124 * In addition to the standard SSB reset sequence, the Host
125 * Control Register must be programmed to bring the USB core
126 * and various phy components out of reset.
127 */
128 ssb_device_enable(dev, 0);
129 ssb_write32(dev, 0x200, 0x7ff);
130
131 /* Change Flush control reg */
132 tmp = ssb_read32(dev, 0x400);
133 tmp &= ~8;
134 ssb_write32(dev, 0x400, tmp);
135 tmp = ssb_read32(dev, 0x400);
136
137 /* Change Shim control reg */
138 tmp = ssb_read32(dev, 0x304);
139 tmp &= ~0x100;
140 ssb_write32(dev, 0x304, tmp);
141 tmp = ssb_read32(dev, 0x304);
142
143 udelay(1);
144
145 /* Work around for 5354 failures */
146 if (dev->id.revision == 2 && dev->bus->chip_id == 0x5354) {
147 /* Change syn01 reg */
148 tmp = 0x00fe00fe;
149 ssb_write32(dev, 0x894, tmp);
150
151 /* Change syn03 reg */
152 tmp = ssb_read32(dev, 0x89c);
153 tmp |= 0x1;
154 ssb_write32(dev, 0x89c, tmp);
155 }
156 } else
157 ssb_device_enable(dev, 0);
Michael Bueschc604e852007-10-09 23:47:17 -0700158
159 hcd = usb_create_hcd(&ssb_ohci_hc_driver, dev->dev,
Kay Sievers7071a3c2008-05-02 06:02:41 +0200160 dev_name(dev->dev));
Michael Bueschc604e852007-10-09 23:47:17 -0700161 if (!hcd)
162 goto err_dev_disable;
163 ohcidev = hcd_to_ssb_ohci(hcd);
164 ohcidev->enable_flags = flags;
165
166 tmp = ssb_read32(dev, SSB_ADMATCH0);
167 hcd->rsrc_start = ssb_admatch_base(tmp);
168 hcd->rsrc_len = ssb_admatch_size(tmp);
169 hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
170 if (!hcd->regs)
171 goto err_put_hcd;
Alan Stern442258e2007-12-06 14:47:08 -0500172 err = usb_add_hcd(hcd, dev->irq, IRQF_DISABLED | IRQF_SHARED);
Michael Bueschc604e852007-10-09 23:47:17 -0700173 if (err)
174 goto err_iounmap;
175
176 ssb_set_drvdata(dev, hcd);
177
178 return err;
179
180err_iounmap:
181 iounmap(hcd->regs);
182err_put_hcd:
183 usb_put_hcd(hcd);
184err_dev_disable:
185 ssb_device_disable(dev, flags);
186 return err;
187}
188
189static int ssb_ohci_probe(struct ssb_device *dev,
190 const struct ssb_device_id *id)
191{
192 int err;
193 u16 chipid_top;
194
195 /* USBcores are only connected on embedded devices. */
196 chipid_top = (dev->bus->chip_id & 0xFF00);
197 if (chipid_top != 0x4700 && chipid_top != 0x5300)
198 return -ENODEV;
199
200 /* TODO: Probably need checks here; is the core connected? */
201
202 if (usb_disabled())
203 return -ENODEV;
204
205 /* We currently always attach SSB_DEV_USB11_HOSTDEV
206 * as HOST OHCI. If we want to attach it as Client device,
207 * we must branch here and call into the (yet to
208 * be written) Client mode driver. Same for remove(). */
209
210 err = ssb_ohci_attach(dev);
211
212 return err;
213}
214
215static void ssb_ohci_remove(struct ssb_device *dev)
216{
217 ssb_ohci_detach(dev);
218}
219
220#ifdef CONFIG_PM
221
222static int ssb_ohci_suspend(struct ssb_device *dev, pm_message_t state)
223{
224 ssb_device_disable(dev, 0);
225
226 return 0;
227}
228
229static int ssb_ohci_resume(struct ssb_device *dev)
230{
231 struct usb_hcd *hcd = ssb_get_drvdata(dev);
232 struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
233
234 ssb_device_enable(dev, ohcidev->enable_flags);
235
Alan Stern43bbb7e2008-04-03 18:03:17 -0400236 ohci_finish_controller_resume(hcd);
Michael Bueschc604e852007-10-09 23:47:17 -0700237 return 0;
238}
239
240#else /* !CONFIG_PM */
241#define ssb_ohci_suspend NULL
242#define ssb_ohci_resume NULL
243#endif /* CONFIG_PM */
244
245static const struct ssb_device_id ssb_ohci_table[] = {
246 SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV),
247 SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV),
Hauke Mehrtensf2402f22010-07-28 22:11:35 +0200248 SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV),
Michael Bueschc604e852007-10-09 23:47:17 -0700249 SSB_DEVTABLE_END
250};
251MODULE_DEVICE_TABLE(ssb, ssb_ohci_table);
252
253static struct ssb_driver ssb_ohci_driver = {
254 .name = KBUILD_MODNAME,
255 .id_table = ssb_ohci_table,
256 .probe = ssb_ohci_probe,
257 .remove = ssb_ohci_remove,
258 .suspend = ssb_ohci_suspend,
259 .resume = ssb_ohci_resume,
260};