Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (C) ST-Ericsson SA 2012 |
| 3 | * |
| 4 | * Charger driver for AB8500 |
| 5 | * |
| 6 | * License Terms: GNU General Public License v2 |
| 7 | * Author: |
| 8 | * Johan Palsson <johan.palsson@stericsson.com> |
| 9 | * Karl Komierowski <karl.komierowski@stericsson.com> |
| 10 | * Arun R Murthy <arun.murthy@stericsson.com> |
| 11 | */ |
| 12 | |
| 13 | #include <linux/init.h> |
| 14 | #include <linux/module.h> |
| 15 | #include <linux/device.h> |
| 16 | #include <linux/interrupt.h> |
| 17 | #include <linux/delay.h> |
| 18 | #include <linux/slab.h> |
| 19 | #include <linux/platform_device.h> |
| 20 | #include <linux/power_supply.h> |
| 21 | #include <linux/completion.h> |
| 22 | #include <linux/regulator/consumer.h> |
| 23 | #include <linux/err.h> |
| 24 | #include <linux/workqueue.h> |
| 25 | #include <linux/kobject.h> |
Rajanikanth H.V | 4aef72d | 2012-11-18 19:17:47 -0800 | [diff] [blame] | 26 | #include <linux/of.h> |
| 27 | #include <linux/mfd/core.h> |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 28 | #include <linux/mfd/abx500/ab8500.h> |
| 29 | #include <linux/mfd/abx500.h> |
| 30 | #include <linux/mfd/abx500/ab8500-bm.h> |
| 31 | #include <linux/mfd/abx500/ab8500-gpadc.h> |
| 32 | #include <linux/mfd/abx500/ux500_chargalg.h> |
| 33 | #include <linux/usb/otg.h> |
| 34 | |
| 35 | /* Charger constants */ |
| 36 | #define NO_PW_CONN 0 |
| 37 | #define AC_PW_CONN 1 |
| 38 | #define USB_PW_CONN 2 |
| 39 | |
| 40 | #define MAIN_WDOG_ENA 0x01 |
| 41 | #define MAIN_WDOG_KICK 0x02 |
| 42 | #define MAIN_WDOG_DIS 0x00 |
| 43 | #define CHARG_WD_KICK 0x01 |
| 44 | #define MAIN_CH_ENA 0x01 |
| 45 | #define MAIN_CH_NO_OVERSHOOT_ENA_N 0x02 |
| 46 | #define USB_CH_ENA 0x01 |
| 47 | #define USB_CHG_NO_OVERSHOOT_ENA_N 0x02 |
| 48 | #define MAIN_CH_DET 0x01 |
| 49 | #define MAIN_CH_CV_ON 0x04 |
| 50 | #define USB_CH_CV_ON 0x08 |
| 51 | #define VBUS_DET_DBNC100 0x02 |
| 52 | #define VBUS_DET_DBNC1 0x01 |
| 53 | #define OTP_ENABLE_WD 0x01 |
| 54 | |
| 55 | #define MAIN_CH_INPUT_CURR_SHIFT 4 |
| 56 | #define VBUS_IN_CURR_LIM_SHIFT 4 |
| 57 | |
| 58 | #define LED_INDICATOR_PWM_ENA 0x01 |
| 59 | #define LED_INDICATOR_PWM_DIS 0x00 |
| 60 | #define LED_IND_CUR_5MA 0x04 |
| 61 | #define LED_INDICATOR_PWM_DUTY_252_256 0xBF |
| 62 | |
| 63 | /* HW failure constants */ |
| 64 | #define MAIN_CH_TH_PROT 0x02 |
| 65 | #define VBUS_CH_NOK 0x08 |
| 66 | #define USB_CH_TH_PROT 0x02 |
| 67 | #define VBUS_OVV_TH 0x01 |
| 68 | #define MAIN_CH_NOK 0x01 |
| 69 | #define VBUS_DET 0x80 |
| 70 | |
| 71 | /* UsbLineStatus register bit masks */ |
| 72 | #define AB8500_USB_LINK_STATUS 0x78 |
| 73 | #define AB8500_STD_HOST_SUSP 0x18 |
| 74 | |
| 75 | /* Watchdog timeout constant */ |
| 76 | #define WD_TIMER 0x30 /* 4min */ |
| 77 | #define WD_KICK_INTERVAL (60 * HZ) |
| 78 | |
| 79 | /* Lowest charger voltage is 3.39V -> 0x4E */ |
| 80 | #define LOW_VOLT_REG 0x4E |
| 81 | |
Johan Bjornstedt | f8e96df | 2012-01-18 12:44:55 +0100 | [diff] [blame] | 82 | /* Step up/down delay in us */ |
| 83 | #define STEP_UDELAY 1000 |
| 84 | |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 85 | /* UsbLineStatus register - usb types */ |
| 86 | enum ab8500_charger_link_status { |
| 87 | USB_STAT_NOT_CONFIGURED, |
| 88 | USB_STAT_STD_HOST_NC, |
| 89 | USB_STAT_STD_HOST_C_NS, |
| 90 | USB_STAT_STD_HOST_C_S, |
| 91 | USB_STAT_HOST_CHG_NM, |
| 92 | USB_STAT_HOST_CHG_HS, |
| 93 | USB_STAT_HOST_CHG_HS_CHIRP, |
| 94 | USB_STAT_DEDICATED_CHG, |
| 95 | USB_STAT_ACA_RID_A, |
| 96 | USB_STAT_ACA_RID_B, |
| 97 | USB_STAT_ACA_RID_C_NM, |
| 98 | USB_STAT_ACA_RID_C_HS, |
| 99 | USB_STAT_ACA_RID_C_HS_CHIRP, |
| 100 | USB_STAT_HM_IDGND, |
| 101 | USB_STAT_RESERVED, |
| 102 | USB_STAT_NOT_VALID_LINK, |
| 103 | }; |
| 104 | |
| 105 | enum ab8500_usb_state { |
| 106 | AB8500_BM_USB_STATE_RESET_HS, /* HighSpeed Reset */ |
| 107 | AB8500_BM_USB_STATE_RESET_FS, /* FullSpeed/LowSpeed Reset */ |
| 108 | AB8500_BM_USB_STATE_CONFIGURED, |
| 109 | AB8500_BM_USB_STATE_SUSPEND, |
| 110 | AB8500_BM_USB_STATE_RESUME, |
| 111 | AB8500_BM_USB_STATE_MAX, |
| 112 | }; |
| 113 | |
| 114 | /* VBUS input current limits supported in AB8500 in mA */ |
| 115 | #define USB_CH_IP_CUR_LVL_0P05 50 |
| 116 | #define USB_CH_IP_CUR_LVL_0P09 98 |
| 117 | #define USB_CH_IP_CUR_LVL_0P19 193 |
| 118 | #define USB_CH_IP_CUR_LVL_0P29 290 |
| 119 | #define USB_CH_IP_CUR_LVL_0P38 380 |
| 120 | #define USB_CH_IP_CUR_LVL_0P45 450 |
| 121 | #define USB_CH_IP_CUR_LVL_0P5 500 |
| 122 | #define USB_CH_IP_CUR_LVL_0P6 600 |
| 123 | #define USB_CH_IP_CUR_LVL_0P7 700 |
| 124 | #define USB_CH_IP_CUR_LVL_0P8 800 |
| 125 | #define USB_CH_IP_CUR_LVL_0P9 900 |
| 126 | #define USB_CH_IP_CUR_LVL_1P0 1000 |
| 127 | #define USB_CH_IP_CUR_LVL_1P1 1100 |
| 128 | #define USB_CH_IP_CUR_LVL_1P3 1300 |
| 129 | #define USB_CH_IP_CUR_LVL_1P4 1400 |
| 130 | #define USB_CH_IP_CUR_LVL_1P5 1500 |
| 131 | |
| 132 | #define VBAT_TRESH_IP_CUR_RED 3800 |
| 133 | |
| 134 | #define to_ab8500_charger_usb_device_info(x) container_of((x), \ |
| 135 | struct ab8500_charger, usb_chg) |
| 136 | #define to_ab8500_charger_ac_device_info(x) container_of((x), \ |
| 137 | struct ab8500_charger, ac_chg) |
| 138 | |
| 139 | /** |
| 140 | * struct ab8500_charger_interrupts - ab8500 interupts |
| 141 | * @name: name of the interrupt |
| 142 | * @isr function pointer to the isr |
| 143 | */ |
| 144 | struct ab8500_charger_interrupts { |
| 145 | char *name; |
| 146 | irqreturn_t (*isr)(int irq, void *data); |
| 147 | }; |
| 148 | |
| 149 | struct ab8500_charger_info { |
| 150 | int charger_connected; |
| 151 | int charger_online; |
| 152 | int charger_voltage; |
| 153 | int cv_active; |
| 154 | bool wd_expired; |
| 155 | }; |
| 156 | |
| 157 | struct ab8500_charger_event_flags { |
| 158 | bool mainextchnotok; |
| 159 | bool main_thermal_prot; |
| 160 | bool usb_thermal_prot; |
| 161 | bool vbus_ovv; |
| 162 | bool usbchargernotok; |
| 163 | bool chgwdexp; |
| 164 | bool vbus_collapse; |
| 165 | }; |
| 166 | |
| 167 | struct ab8500_charger_usb_state { |
| 168 | bool usb_changed; |
| 169 | int usb_current; |
| 170 | enum ab8500_usb_state state; |
| 171 | spinlock_t usb_lock; |
| 172 | }; |
| 173 | |
| 174 | /** |
| 175 | * struct ab8500_charger - ab8500 Charger device information |
| 176 | * @dev: Pointer to the structure device |
| 177 | * @max_usb_in_curr: Max USB charger input current |
| 178 | * @vbus_detected: VBUS detected |
| 179 | * @vbus_detected_start: |
| 180 | * VBUS detected during startup |
| 181 | * @ac_conn: This will be true when the AC charger has been plugged |
| 182 | * @vddadc_en_ac: Indicate if VDD ADC supply is enabled because AC |
| 183 | * charger is enabled |
| 184 | * @vddadc_en_usb: Indicate if VDD ADC supply is enabled because USB |
| 185 | * charger is enabled |
| 186 | * @vbat Battery voltage |
| 187 | * @old_vbat Previously measured battery voltage |
| 188 | * @autopower Indicate if we should have automatic pwron after pwrloss |
Rajanikanth H.V | 4aef72d | 2012-11-18 19:17:47 -0800 | [diff] [blame] | 189 | * @autopower_cfg platform specific power config support for "pwron after pwrloss" |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 190 | * @parent: Pointer to the struct ab8500 |
| 191 | * @gpadc: Pointer to the struct gpadc |
Lee Jones | b0284de | 2012-11-30 10:09:42 +0000 | [diff] [blame] | 192 | * @bm: Platform specific battery management information |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 193 | * @flags: Structure for information about events triggered |
| 194 | * @usb_state: Structure for usb stack information |
| 195 | * @ac_chg: AC charger power supply |
| 196 | * @usb_chg: USB charger power supply |
| 197 | * @ac: Structure that holds the AC charger properties |
| 198 | * @usb: Structure that holds the USB charger properties |
| 199 | * @regu: Pointer to the struct regulator |
| 200 | * @charger_wq: Work queue for the IRQs and checking HW state |
| 201 | * @check_vbat_work Work for checking vbat threshold to adjust vbus current |
| 202 | * @check_hw_failure_work: Work for checking HW state |
| 203 | * @check_usbchgnotok_work: Work for checking USB charger not ok status |
| 204 | * @kick_wd_work: Work for kicking the charger watchdog in case |
| 205 | * of ABB rev 1.* due to the watchog logic bug |
| 206 | * @ac_work: Work for checking AC charger connection |
| 207 | * @detect_usb_type_work: Work for detecting the USB type connected |
| 208 | * @usb_link_status_work: Work for checking the new USB link status |
| 209 | * @usb_state_changed_work: Work for checking USB state |
| 210 | * @check_main_thermal_prot_work: |
| 211 | * Work for checking Main thermal status |
| 212 | * @check_usb_thermal_prot_work: |
| 213 | * Work for checking USB thermal status |
| 214 | */ |
| 215 | struct ab8500_charger { |
| 216 | struct device *dev; |
| 217 | int max_usb_in_curr; |
| 218 | bool vbus_detected; |
| 219 | bool vbus_detected_start; |
| 220 | bool ac_conn; |
| 221 | bool vddadc_en_ac; |
| 222 | bool vddadc_en_usb; |
| 223 | int vbat; |
| 224 | int old_vbat; |
| 225 | bool autopower; |
Rajanikanth H.V | 4aef72d | 2012-11-18 19:17:47 -0800 | [diff] [blame] | 226 | bool autopower_cfg; |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 227 | struct ab8500 *parent; |
| 228 | struct ab8500_gpadc *gpadc; |
Lee Jones | b0284de | 2012-11-30 10:09:42 +0000 | [diff] [blame] | 229 | struct abx500_bm_data *bm; |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 230 | struct ab8500_charger_event_flags flags; |
| 231 | struct ab8500_charger_usb_state usb_state; |
| 232 | struct ux500_charger ac_chg; |
| 233 | struct ux500_charger usb_chg; |
| 234 | struct ab8500_charger_info ac; |
| 235 | struct ab8500_charger_info usb; |
| 236 | struct regulator *regu; |
| 237 | struct workqueue_struct *charger_wq; |
| 238 | struct delayed_work check_vbat_work; |
| 239 | struct delayed_work check_hw_failure_work; |
| 240 | struct delayed_work check_usbchgnotok_work; |
| 241 | struct delayed_work kick_wd_work; |
| 242 | struct work_struct ac_work; |
| 243 | struct work_struct detect_usb_type_work; |
| 244 | struct work_struct usb_link_status_work; |
| 245 | struct work_struct usb_state_changed_work; |
| 246 | struct work_struct check_main_thermal_prot_work; |
| 247 | struct work_struct check_usb_thermal_prot_work; |
Anton Vorontsov | efd71c8 | 2012-03-14 04:22:17 +0400 | [diff] [blame] | 248 | struct usb_phy *usb_phy; |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 249 | struct notifier_block nb; |
| 250 | }; |
| 251 | |
| 252 | /* AC properties */ |
| 253 | static enum power_supply_property ab8500_charger_ac_props[] = { |
| 254 | POWER_SUPPLY_PROP_HEALTH, |
| 255 | POWER_SUPPLY_PROP_PRESENT, |
| 256 | POWER_SUPPLY_PROP_ONLINE, |
| 257 | POWER_SUPPLY_PROP_VOLTAGE_NOW, |
| 258 | POWER_SUPPLY_PROP_VOLTAGE_AVG, |
| 259 | POWER_SUPPLY_PROP_CURRENT_NOW, |
| 260 | }; |
| 261 | |
| 262 | /* USB properties */ |
| 263 | static enum power_supply_property ab8500_charger_usb_props[] = { |
| 264 | POWER_SUPPLY_PROP_HEALTH, |
| 265 | POWER_SUPPLY_PROP_CURRENT_AVG, |
| 266 | POWER_SUPPLY_PROP_PRESENT, |
| 267 | POWER_SUPPLY_PROP_ONLINE, |
| 268 | POWER_SUPPLY_PROP_VOLTAGE_NOW, |
| 269 | POWER_SUPPLY_PROP_VOLTAGE_AVG, |
| 270 | POWER_SUPPLY_PROP_CURRENT_NOW, |
| 271 | }; |
| 272 | |
| 273 | /** |
| 274 | * ab8500_power_loss_handling - set how we handle powerloss. |
| 275 | * @di: pointer to the ab8500_charger structure |
| 276 | * |
| 277 | * Magic nummbers are from STE HW department. |
| 278 | */ |
| 279 | static void ab8500_power_loss_handling(struct ab8500_charger *di) |
| 280 | { |
| 281 | u8 reg; |
| 282 | int ret; |
| 283 | |
| 284 | dev_dbg(di->dev, "Autopower : %d\n", di->autopower); |
| 285 | |
| 286 | /* read the autopower register */ |
| 287 | ret = abx500_get_register_interruptible(di->dev, 0x15, 0x00, ®); |
| 288 | if (ret) { |
| 289 | dev_err(di->dev, "%d write failed\n", __LINE__); |
| 290 | return; |
| 291 | } |
| 292 | |
| 293 | /* enable the OPT emulation registers */ |
| 294 | ret = abx500_set_register_interruptible(di->dev, 0x11, 0x00, 0x2); |
| 295 | if (ret) { |
| 296 | dev_err(di->dev, "%d write failed\n", __LINE__); |
| 297 | return; |
| 298 | } |
| 299 | |
| 300 | if (di->autopower) |
| 301 | reg |= 0x8; |
| 302 | else |
| 303 | reg &= ~0x8; |
| 304 | |
| 305 | /* write back the changed value to autopower reg */ |
| 306 | ret = abx500_set_register_interruptible(di->dev, 0x15, 0x00, reg); |
| 307 | if (ret) { |
| 308 | dev_err(di->dev, "%d write failed\n", __LINE__); |
| 309 | return; |
| 310 | } |
| 311 | |
| 312 | /* disable the set OTP registers again */ |
| 313 | ret = abx500_set_register_interruptible(di->dev, 0x11, 0x00, 0x0); |
| 314 | if (ret) { |
| 315 | dev_err(di->dev, "%d write failed\n", __LINE__); |
| 316 | return; |
| 317 | } |
| 318 | } |
| 319 | |
| 320 | /** |
| 321 | * ab8500_power_supply_changed - a wrapper with local extentions for |
| 322 | * power_supply_changed |
| 323 | * @di: pointer to the ab8500_charger structure |
| 324 | * @psy: pointer to power_supply_that have changed. |
| 325 | * |
| 326 | */ |
| 327 | static void ab8500_power_supply_changed(struct ab8500_charger *di, |
| 328 | struct power_supply *psy) |
| 329 | { |
Rajanikanth H.V | 4aef72d | 2012-11-18 19:17:47 -0800 | [diff] [blame] | 330 | if (di->autopower_cfg) { |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 331 | if (!di->usb.charger_connected && |
| 332 | !di->ac.charger_connected && |
| 333 | di->autopower) { |
| 334 | di->autopower = false; |
| 335 | ab8500_power_loss_handling(di); |
| 336 | } else if (!di->autopower && |
| 337 | (di->ac.charger_connected || |
| 338 | di->usb.charger_connected)) { |
| 339 | di->autopower = true; |
| 340 | ab8500_power_loss_handling(di); |
| 341 | } |
| 342 | } |
| 343 | power_supply_changed(psy); |
| 344 | } |
| 345 | |
| 346 | static void ab8500_charger_set_usb_connected(struct ab8500_charger *di, |
| 347 | bool connected) |
| 348 | { |
| 349 | if (connected != di->usb.charger_connected) { |
| 350 | dev_dbg(di->dev, "USB connected:%i\n", connected); |
| 351 | di->usb.charger_connected = connected; |
| 352 | sysfs_notify(&di->usb_chg.psy.dev->kobj, NULL, "present"); |
| 353 | } |
| 354 | } |
| 355 | |
| 356 | /** |
| 357 | * ab8500_charger_get_ac_voltage() - get ac charger voltage |
| 358 | * @di: pointer to the ab8500_charger structure |
| 359 | * |
| 360 | * Returns ac charger voltage (on success) |
| 361 | */ |
| 362 | static int ab8500_charger_get_ac_voltage(struct ab8500_charger *di) |
| 363 | { |
| 364 | int vch; |
| 365 | |
| 366 | /* Only measure voltage if the charger is connected */ |
| 367 | if (di->ac.charger_connected) { |
| 368 | vch = ab8500_gpadc_convert(di->gpadc, MAIN_CHARGER_V); |
| 369 | if (vch < 0) |
| 370 | dev_err(di->dev, "%s gpadc conv failed,\n", __func__); |
| 371 | } else { |
| 372 | vch = 0; |
| 373 | } |
| 374 | return vch; |
| 375 | } |
| 376 | |
| 377 | /** |
| 378 | * ab8500_charger_ac_cv() - check if the main charger is in CV mode |
| 379 | * @di: pointer to the ab8500_charger structure |
| 380 | * |
| 381 | * Returns ac charger CV mode (on success) else error code |
| 382 | */ |
| 383 | static int ab8500_charger_ac_cv(struct ab8500_charger *di) |
| 384 | { |
| 385 | u8 val; |
| 386 | int ret = 0; |
| 387 | |
| 388 | /* Only check CV mode if the charger is online */ |
| 389 | if (di->ac.charger_online) { |
| 390 | ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER, |
| 391 | AB8500_CH_STATUS1_REG, &val); |
| 392 | if (ret < 0) { |
| 393 | dev_err(di->dev, "%s ab8500 read failed\n", __func__); |
| 394 | return 0; |
| 395 | } |
| 396 | |
| 397 | if (val & MAIN_CH_CV_ON) |
| 398 | ret = 1; |
| 399 | else |
| 400 | ret = 0; |
| 401 | } |
| 402 | |
| 403 | return ret; |
| 404 | } |
| 405 | |
| 406 | /** |
| 407 | * ab8500_charger_get_vbus_voltage() - get vbus voltage |
| 408 | * @di: pointer to the ab8500_charger structure |
| 409 | * |
| 410 | * This function returns the vbus voltage. |
| 411 | * Returns vbus voltage (on success) |
| 412 | */ |
| 413 | static int ab8500_charger_get_vbus_voltage(struct ab8500_charger *di) |
| 414 | { |
| 415 | int vch; |
| 416 | |
| 417 | /* Only measure voltage if the charger is connected */ |
| 418 | if (di->usb.charger_connected) { |
| 419 | vch = ab8500_gpadc_convert(di->gpadc, VBUS_V); |
| 420 | if (vch < 0) |
| 421 | dev_err(di->dev, "%s gpadc conv failed\n", __func__); |
| 422 | } else { |
| 423 | vch = 0; |
| 424 | } |
| 425 | return vch; |
| 426 | } |
| 427 | |
| 428 | /** |
| 429 | * ab8500_charger_get_usb_current() - get usb charger current |
| 430 | * @di: pointer to the ab8500_charger structure |
| 431 | * |
| 432 | * This function returns the usb charger current. |
| 433 | * Returns usb current (on success) and error code on failure |
| 434 | */ |
| 435 | static int ab8500_charger_get_usb_current(struct ab8500_charger *di) |
| 436 | { |
| 437 | int ich; |
| 438 | |
| 439 | /* Only measure current if the charger is online */ |
| 440 | if (di->usb.charger_online) { |
| 441 | ich = ab8500_gpadc_convert(di->gpadc, USB_CHARGER_C); |
| 442 | if (ich < 0) |
| 443 | dev_err(di->dev, "%s gpadc conv failed\n", __func__); |
| 444 | } else { |
| 445 | ich = 0; |
| 446 | } |
| 447 | return ich; |
| 448 | } |
| 449 | |
| 450 | /** |
| 451 | * ab8500_charger_get_ac_current() - get ac charger current |
| 452 | * @di: pointer to the ab8500_charger structure |
| 453 | * |
| 454 | * This function returns the ac charger current. |
| 455 | * Returns ac current (on success) and error code on failure. |
| 456 | */ |
| 457 | static int ab8500_charger_get_ac_current(struct ab8500_charger *di) |
| 458 | { |
| 459 | int ich; |
| 460 | |
| 461 | /* Only measure current if the charger is online */ |
| 462 | if (di->ac.charger_online) { |
| 463 | ich = ab8500_gpadc_convert(di->gpadc, MAIN_CHARGER_C); |
| 464 | if (ich < 0) |
| 465 | dev_err(di->dev, "%s gpadc conv failed\n", __func__); |
| 466 | } else { |
| 467 | ich = 0; |
| 468 | } |
| 469 | return ich; |
| 470 | } |
| 471 | |
| 472 | /** |
| 473 | * ab8500_charger_usb_cv() - check if the usb charger is in CV mode |
| 474 | * @di: pointer to the ab8500_charger structure |
| 475 | * |
| 476 | * Returns ac charger CV mode (on success) else error code |
| 477 | */ |
| 478 | static int ab8500_charger_usb_cv(struct ab8500_charger *di) |
| 479 | { |
| 480 | int ret; |
| 481 | u8 val; |
| 482 | |
| 483 | /* Only check CV mode if the charger is online */ |
| 484 | if (di->usb.charger_online) { |
| 485 | ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER, |
| 486 | AB8500_CH_USBCH_STAT1_REG, &val); |
| 487 | if (ret < 0) { |
| 488 | dev_err(di->dev, "%s ab8500 read failed\n", __func__); |
| 489 | return 0; |
| 490 | } |
| 491 | |
| 492 | if (val & USB_CH_CV_ON) |
| 493 | ret = 1; |
| 494 | else |
| 495 | ret = 0; |
| 496 | } else { |
| 497 | ret = 0; |
| 498 | } |
| 499 | |
| 500 | return ret; |
| 501 | } |
| 502 | |
| 503 | /** |
| 504 | * ab8500_charger_detect_chargers() - Detect the connected chargers |
| 505 | * @di: pointer to the ab8500_charger structure |
| 506 | * |
| 507 | * Returns the type of charger connected. |
| 508 | * For USB it will not mean we can actually charge from it |
| 509 | * but that there is a USB cable connected that we have to |
| 510 | * identify. This is used during startup when we don't get |
| 511 | * interrupts of the charger detection |
| 512 | * |
| 513 | * Returns an integer value, that means, |
| 514 | * NO_PW_CONN no power supply is connected |
| 515 | * AC_PW_CONN if the AC power supply is connected |
| 516 | * USB_PW_CONN if the USB power supply is connected |
| 517 | * AC_PW_CONN + USB_PW_CONN if USB and AC power supplies are both connected |
| 518 | */ |
| 519 | static int ab8500_charger_detect_chargers(struct ab8500_charger *di) |
| 520 | { |
| 521 | int result = NO_PW_CONN; |
| 522 | int ret; |
| 523 | u8 val; |
| 524 | |
| 525 | /* Check for AC charger */ |
| 526 | ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER, |
| 527 | AB8500_CH_STATUS1_REG, &val); |
| 528 | if (ret < 0) { |
| 529 | dev_err(di->dev, "%s ab8500 read failed\n", __func__); |
| 530 | return ret; |
| 531 | } |
| 532 | |
| 533 | if (val & MAIN_CH_DET) |
| 534 | result = AC_PW_CONN; |
| 535 | |
| 536 | /* Check for USB charger */ |
| 537 | ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER, |
| 538 | AB8500_CH_USBCH_STAT1_REG, &val); |
| 539 | if (ret < 0) { |
| 540 | dev_err(di->dev, "%s ab8500 read failed\n", __func__); |
| 541 | return ret; |
| 542 | } |
| 543 | |
| 544 | if ((val & VBUS_DET_DBNC1) && (val & VBUS_DET_DBNC100)) |
| 545 | result |= USB_PW_CONN; |
| 546 | |
| 547 | return result; |
| 548 | } |
| 549 | |
| 550 | /** |
| 551 | * ab8500_charger_max_usb_curr() - get the max curr for the USB type |
| 552 | * @di: pointer to the ab8500_charger structure |
| 553 | * @link_status: the identified USB type |
| 554 | * |
| 555 | * Get the maximum current that is allowed to be drawn from the host |
| 556 | * based on the USB type. |
| 557 | * Returns error code in case of failure else 0 on success |
| 558 | */ |
| 559 | static int ab8500_charger_max_usb_curr(struct ab8500_charger *di, |
| 560 | enum ab8500_charger_link_status link_status) |
| 561 | { |
| 562 | int ret = 0; |
| 563 | |
| 564 | switch (link_status) { |
| 565 | case USB_STAT_STD_HOST_NC: |
| 566 | case USB_STAT_STD_HOST_C_NS: |
| 567 | case USB_STAT_STD_HOST_C_S: |
| 568 | dev_dbg(di->dev, "USB Type - Standard host is " |
| 569 | "detected through USB driver\n"); |
| 570 | di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P09; |
| 571 | break; |
| 572 | case USB_STAT_HOST_CHG_HS_CHIRP: |
| 573 | di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5; |
| 574 | break; |
| 575 | case USB_STAT_HOST_CHG_HS: |
| 576 | case USB_STAT_ACA_RID_C_HS: |
| 577 | di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P9; |
| 578 | break; |
| 579 | case USB_STAT_ACA_RID_A: |
| 580 | /* |
| 581 | * Dedicated charger level minus maximum current accessory |
| 582 | * can consume (300mA). Closest level is 1100mA |
| 583 | */ |
| 584 | di->max_usb_in_curr = USB_CH_IP_CUR_LVL_1P1; |
| 585 | break; |
| 586 | case USB_STAT_ACA_RID_B: |
| 587 | /* |
| 588 | * Dedicated charger level minus 120mA (20mA for ACA and |
| 589 | * 100mA for potential accessory). Closest level is 1300mA |
| 590 | */ |
| 591 | di->max_usb_in_curr = USB_CH_IP_CUR_LVL_1P3; |
| 592 | break; |
| 593 | case USB_STAT_DEDICATED_CHG: |
| 594 | case USB_STAT_HOST_CHG_NM: |
| 595 | case USB_STAT_ACA_RID_C_HS_CHIRP: |
| 596 | case USB_STAT_ACA_RID_C_NM: |
| 597 | di->max_usb_in_curr = USB_CH_IP_CUR_LVL_1P5; |
| 598 | break; |
| 599 | case USB_STAT_RESERVED: |
| 600 | /* |
| 601 | * This state is used to indicate that VBUS has dropped below |
| 602 | * the detection level 4 times in a row. This is due to the |
| 603 | * charger output current is set to high making the charger |
| 604 | * voltage collapse. This have to be propagated through to |
| 605 | * chargalg. This is done using the property |
| 606 | * POWER_SUPPLY_PROP_CURRENT_AVG = 1 |
| 607 | */ |
| 608 | di->flags.vbus_collapse = true; |
| 609 | dev_dbg(di->dev, "USB Type - USB_STAT_RESERVED " |
| 610 | "VBUS has collapsed\n"); |
| 611 | ret = -1; |
| 612 | break; |
| 613 | case USB_STAT_HM_IDGND: |
| 614 | case USB_STAT_NOT_CONFIGURED: |
| 615 | case USB_STAT_NOT_VALID_LINK: |
| 616 | dev_err(di->dev, "USB Type - Charging not allowed\n"); |
| 617 | di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P05; |
| 618 | ret = -ENXIO; |
| 619 | break; |
| 620 | default: |
| 621 | dev_err(di->dev, "USB Type - Unknown\n"); |
| 622 | di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P05; |
| 623 | ret = -ENXIO; |
| 624 | break; |
| 625 | }; |
| 626 | |
| 627 | dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d", |
| 628 | link_status, di->max_usb_in_curr); |
| 629 | |
| 630 | return ret; |
| 631 | } |
| 632 | |
| 633 | /** |
| 634 | * ab8500_charger_read_usb_type() - read the type of usb connected |
| 635 | * @di: pointer to the ab8500_charger structure |
| 636 | * |
| 637 | * Detect the type of the plugged USB |
| 638 | * Returns error code in case of failure else 0 on success |
| 639 | */ |
| 640 | static int ab8500_charger_read_usb_type(struct ab8500_charger *di) |
| 641 | { |
| 642 | int ret; |
| 643 | u8 val; |
| 644 | |
| 645 | ret = abx500_get_register_interruptible(di->dev, |
| 646 | AB8500_INTERRUPT, AB8500_IT_SOURCE21_REG, &val); |
| 647 | if (ret < 0) { |
| 648 | dev_err(di->dev, "%s ab8500 read failed\n", __func__); |
| 649 | return ret; |
| 650 | } |
| 651 | ret = abx500_get_register_interruptible(di->dev, AB8500_USB, |
| 652 | AB8500_USB_LINE_STAT_REG, &val); |
| 653 | if (ret < 0) { |
| 654 | dev_err(di->dev, "%s ab8500 read failed\n", __func__); |
| 655 | return ret; |
| 656 | } |
| 657 | |
| 658 | /* get the USB type */ |
| 659 | val = (val & AB8500_USB_LINK_STATUS) >> 3; |
| 660 | ret = ab8500_charger_max_usb_curr(di, |
| 661 | (enum ab8500_charger_link_status) val); |
| 662 | |
| 663 | return ret; |
| 664 | } |
| 665 | |
| 666 | /** |
| 667 | * ab8500_charger_detect_usb_type() - get the type of usb connected |
| 668 | * @di: pointer to the ab8500_charger structure |
| 669 | * |
| 670 | * Detect the type of the plugged USB |
| 671 | * Returns error code in case of failure else 0 on success |
| 672 | */ |
| 673 | static int ab8500_charger_detect_usb_type(struct ab8500_charger *di) |
| 674 | { |
| 675 | int i, ret; |
| 676 | u8 val; |
| 677 | |
| 678 | /* |
| 679 | * On getting the VBUS rising edge detect interrupt there |
| 680 | * is a 250ms delay after which the register UsbLineStatus |
| 681 | * is filled with valid data. |
| 682 | */ |
| 683 | for (i = 0; i < 10; i++) { |
| 684 | msleep(250); |
| 685 | ret = abx500_get_register_interruptible(di->dev, |
| 686 | AB8500_INTERRUPT, AB8500_IT_SOURCE21_REG, |
| 687 | &val); |
| 688 | if (ret < 0) { |
| 689 | dev_err(di->dev, "%s ab8500 read failed\n", __func__); |
| 690 | return ret; |
| 691 | } |
| 692 | ret = abx500_get_register_interruptible(di->dev, AB8500_USB, |
| 693 | AB8500_USB_LINE_STAT_REG, &val); |
| 694 | if (ret < 0) { |
| 695 | dev_err(di->dev, "%s ab8500 read failed\n", __func__); |
| 696 | return ret; |
| 697 | } |
| 698 | /* |
| 699 | * Until the IT source register is read the UsbLineStatus |
| 700 | * register is not updated, hence doing the same |
| 701 | * Revisit this: |
| 702 | */ |
| 703 | |
| 704 | /* get the USB type */ |
| 705 | val = (val & AB8500_USB_LINK_STATUS) >> 3; |
| 706 | if (val) |
| 707 | break; |
| 708 | } |
| 709 | ret = ab8500_charger_max_usb_curr(di, |
| 710 | (enum ab8500_charger_link_status) val); |
| 711 | |
| 712 | return ret; |
| 713 | } |
| 714 | |
| 715 | /* |
| 716 | * This array maps the raw hex value to charger voltage used by the AB8500 |
| 717 | * Values taken from the UM0836 |
| 718 | */ |
| 719 | static int ab8500_charger_voltage_map[] = { |
| 720 | 3500 , |
| 721 | 3525 , |
| 722 | 3550 , |
| 723 | 3575 , |
| 724 | 3600 , |
| 725 | 3625 , |
| 726 | 3650 , |
| 727 | 3675 , |
| 728 | 3700 , |
| 729 | 3725 , |
| 730 | 3750 , |
| 731 | 3775 , |
| 732 | 3800 , |
| 733 | 3825 , |
| 734 | 3850 , |
| 735 | 3875 , |
| 736 | 3900 , |
| 737 | 3925 , |
| 738 | 3950 , |
| 739 | 3975 , |
| 740 | 4000 , |
| 741 | 4025 , |
| 742 | 4050 , |
| 743 | 4060 , |
| 744 | 4070 , |
| 745 | 4080 , |
| 746 | 4090 , |
| 747 | 4100 , |
| 748 | 4110 , |
| 749 | 4120 , |
| 750 | 4130 , |
| 751 | 4140 , |
| 752 | 4150 , |
| 753 | 4160 , |
| 754 | 4170 , |
| 755 | 4180 , |
| 756 | 4190 , |
| 757 | 4200 , |
| 758 | 4210 , |
| 759 | 4220 , |
| 760 | 4230 , |
| 761 | 4240 , |
| 762 | 4250 , |
| 763 | 4260 , |
| 764 | 4270 , |
| 765 | 4280 , |
| 766 | 4290 , |
| 767 | 4300 , |
| 768 | 4310 , |
| 769 | 4320 , |
| 770 | 4330 , |
| 771 | 4340 , |
| 772 | 4350 , |
| 773 | 4360 , |
| 774 | 4370 , |
| 775 | 4380 , |
| 776 | 4390 , |
| 777 | 4400 , |
| 778 | 4410 , |
| 779 | 4420 , |
| 780 | 4430 , |
| 781 | 4440 , |
| 782 | 4450 , |
| 783 | 4460 , |
| 784 | 4470 , |
| 785 | 4480 , |
| 786 | 4490 , |
| 787 | 4500 , |
| 788 | 4510 , |
| 789 | 4520 , |
| 790 | 4530 , |
| 791 | 4540 , |
| 792 | 4550 , |
| 793 | 4560 , |
| 794 | 4570 , |
| 795 | 4580 , |
| 796 | 4590 , |
| 797 | 4600 , |
| 798 | }; |
| 799 | |
| 800 | /* |
| 801 | * This array maps the raw hex value to charger current used by the AB8500 |
| 802 | * Values taken from the UM0836 |
| 803 | */ |
| 804 | static int ab8500_charger_current_map[] = { |
| 805 | 100 , |
| 806 | 200 , |
| 807 | 300 , |
| 808 | 400 , |
| 809 | 500 , |
| 810 | 600 , |
| 811 | 700 , |
| 812 | 800 , |
| 813 | 900 , |
| 814 | 1000 , |
| 815 | 1100 , |
| 816 | 1200 , |
| 817 | 1300 , |
| 818 | 1400 , |
| 819 | 1500 , |
| 820 | }; |
| 821 | |
| 822 | /* |
| 823 | * This array maps the raw hex value to VBUS input current used by the AB8500 |
| 824 | * Values taken from the UM0836 |
| 825 | */ |
| 826 | static int ab8500_charger_vbus_in_curr_map[] = { |
| 827 | USB_CH_IP_CUR_LVL_0P05, |
| 828 | USB_CH_IP_CUR_LVL_0P09, |
| 829 | USB_CH_IP_CUR_LVL_0P19, |
| 830 | USB_CH_IP_CUR_LVL_0P29, |
| 831 | USB_CH_IP_CUR_LVL_0P38, |
| 832 | USB_CH_IP_CUR_LVL_0P45, |
| 833 | USB_CH_IP_CUR_LVL_0P5, |
| 834 | USB_CH_IP_CUR_LVL_0P6, |
| 835 | USB_CH_IP_CUR_LVL_0P7, |
| 836 | USB_CH_IP_CUR_LVL_0P8, |
| 837 | USB_CH_IP_CUR_LVL_0P9, |
| 838 | USB_CH_IP_CUR_LVL_1P0, |
| 839 | USB_CH_IP_CUR_LVL_1P1, |
| 840 | USB_CH_IP_CUR_LVL_1P3, |
| 841 | USB_CH_IP_CUR_LVL_1P4, |
| 842 | USB_CH_IP_CUR_LVL_1P5, |
| 843 | }; |
| 844 | |
| 845 | static int ab8500_voltage_to_regval(int voltage) |
| 846 | { |
| 847 | int i; |
| 848 | |
| 849 | /* Special case for voltage below 3.5V */ |
| 850 | if (voltage < ab8500_charger_voltage_map[0]) |
| 851 | return LOW_VOLT_REG; |
| 852 | |
| 853 | for (i = 1; i < ARRAY_SIZE(ab8500_charger_voltage_map); i++) { |
| 854 | if (voltage < ab8500_charger_voltage_map[i]) |
| 855 | return i - 1; |
| 856 | } |
| 857 | |
| 858 | /* If not last element, return error */ |
| 859 | i = ARRAY_SIZE(ab8500_charger_voltage_map) - 1; |
| 860 | if (voltage == ab8500_charger_voltage_map[i]) |
| 861 | return i; |
| 862 | else |
| 863 | return -1; |
| 864 | } |
| 865 | |
| 866 | static int ab8500_current_to_regval(int curr) |
| 867 | { |
| 868 | int i; |
| 869 | |
| 870 | if (curr < ab8500_charger_current_map[0]) |
| 871 | return 0; |
| 872 | |
| 873 | for (i = 0; i < ARRAY_SIZE(ab8500_charger_current_map); i++) { |
| 874 | if (curr < ab8500_charger_current_map[i]) |
| 875 | return i - 1; |
| 876 | } |
| 877 | |
| 878 | /* If not last element, return error */ |
| 879 | i = ARRAY_SIZE(ab8500_charger_current_map) - 1; |
| 880 | if (curr == ab8500_charger_current_map[i]) |
| 881 | return i; |
| 882 | else |
| 883 | return -1; |
| 884 | } |
| 885 | |
| 886 | static int ab8500_vbus_in_curr_to_regval(int curr) |
| 887 | { |
| 888 | int i; |
| 889 | |
| 890 | if (curr < ab8500_charger_vbus_in_curr_map[0]) |
| 891 | return 0; |
| 892 | |
| 893 | for (i = 0; i < ARRAY_SIZE(ab8500_charger_vbus_in_curr_map); i++) { |
| 894 | if (curr < ab8500_charger_vbus_in_curr_map[i]) |
| 895 | return i - 1; |
| 896 | } |
| 897 | |
| 898 | /* If not last element, return error */ |
| 899 | i = ARRAY_SIZE(ab8500_charger_vbus_in_curr_map) - 1; |
| 900 | if (curr == ab8500_charger_vbus_in_curr_map[i]) |
| 901 | return i; |
| 902 | else |
| 903 | return -1; |
| 904 | } |
| 905 | |
| 906 | /** |
| 907 | * ab8500_charger_get_usb_cur() - get usb current |
| 908 | * @di: pointer to the ab8500_charger structre |
| 909 | * |
| 910 | * The usb stack provides the maximum current that can be drawn from |
| 911 | * the standard usb host. This will be in mA. |
| 912 | * This function converts current in mA to a value that can be written |
| 913 | * to the register. Returns -1 if charging is not allowed |
| 914 | */ |
| 915 | static int ab8500_charger_get_usb_cur(struct ab8500_charger *di) |
| 916 | { |
| 917 | switch (di->usb_state.usb_current) { |
| 918 | case 100: |
| 919 | di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P09; |
| 920 | break; |
| 921 | case 200: |
| 922 | di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P19; |
| 923 | break; |
| 924 | case 300: |
| 925 | di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P29; |
| 926 | break; |
| 927 | case 400: |
| 928 | di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P38; |
| 929 | break; |
| 930 | case 500: |
| 931 | di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5; |
| 932 | break; |
| 933 | default: |
| 934 | di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P05; |
| 935 | return -1; |
| 936 | break; |
| 937 | }; |
| 938 | return 0; |
| 939 | } |
| 940 | |
| 941 | /** |
Johan Bjornstedt | f8e96df | 2012-01-18 12:44:55 +0100 | [diff] [blame] | 942 | * ab8500_charger_set_current() - set charger current |
| 943 | * @di: pointer to the ab8500_charger structure |
| 944 | * @ich: charger current, in mA |
| 945 | * @reg: select what charger register to set |
| 946 | * |
| 947 | * Set charger current. |
| 948 | * There is no state machine in the AB to step up/down the charger |
| 949 | * current to avoid dips and spikes on MAIN, VBUS and VBAT when |
| 950 | * charging is started. Instead we need to implement |
| 951 | * this charger current step-up/down here. |
| 952 | * Returns error code in case of failure else 0(on success) |
| 953 | */ |
| 954 | static int ab8500_charger_set_current(struct ab8500_charger *di, |
| 955 | int ich, int reg) |
| 956 | { |
| 957 | int ret, i; |
| 958 | int curr_index, prev_curr_index, shift_value; |
| 959 | u8 reg_value; |
| 960 | |
| 961 | switch (reg) { |
| 962 | case AB8500_MCH_IPT_CURLVL_REG: |
| 963 | shift_value = MAIN_CH_INPUT_CURR_SHIFT; |
| 964 | curr_index = ab8500_current_to_regval(ich); |
| 965 | break; |
| 966 | case AB8500_USBCH_IPT_CRNTLVL_REG: |
| 967 | shift_value = VBUS_IN_CURR_LIM_SHIFT; |
| 968 | curr_index = ab8500_vbus_in_curr_to_regval(ich); |
| 969 | break; |
| 970 | case AB8500_CH_OPT_CRNTLVL_REG: |
| 971 | shift_value = 0; |
| 972 | curr_index = ab8500_current_to_regval(ich); |
| 973 | break; |
| 974 | default: |
| 975 | dev_err(di->dev, "%s current register not valid\n", __func__); |
| 976 | return -ENXIO; |
| 977 | } |
| 978 | |
| 979 | if (curr_index < 0) { |
| 980 | dev_err(di->dev, "requested current limit out-of-range\n"); |
| 981 | return -ENXIO; |
| 982 | } |
| 983 | |
| 984 | ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER, |
| 985 | reg, ®_value); |
| 986 | if (ret < 0) { |
| 987 | dev_err(di->dev, "%s read failed\n", __func__); |
| 988 | return ret; |
| 989 | } |
| 990 | prev_curr_index = (reg_value >> shift_value); |
| 991 | |
| 992 | /* only update current if it's been changed */ |
| 993 | if (prev_curr_index == curr_index) |
| 994 | return 0; |
| 995 | |
| 996 | dev_dbg(di->dev, "%s set charger current: %d mA for reg: 0x%02x\n", |
| 997 | __func__, ich, reg); |
| 998 | |
| 999 | if (prev_curr_index > curr_index) { |
| 1000 | for (i = prev_curr_index - 1; i >= curr_index; i--) { |
| 1001 | ret = abx500_set_register_interruptible(di->dev, |
| 1002 | AB8500_CHARGER, reg, (u8) i << shift_value); |
| 1003 | if (ret) { |
| 1004 | dev_err(di->dev, "%s write failed\n", __func__); |
| 1005 | return ret; |
| 1006 | } |
| 1007 | usleep_range(STEP_UDELAY, STEP_UDELAY * 2); |
| 1008 | } |
| 1009 | } else { |
| 1010 | for (i = prev_curr_index + 1; i <= curr_index; i++) { |
| 1011 | ret = abx500_set_register_interruptible(di->dev, |
| 1012 | AB8500_CHARGER, reg, (u8) i << shift_value); |
| 1013 | if (ret) { |
| 1014 | dev_err(di->dev, "%s write failed\n", __func__); |
| 1015 | return ret; |
| 1016 | } |
| 1017 | usleep_range(STEP_UDELAY, STEP_UDELAY * 2); |
| 1018 | } |
| 1019 | } |
| 1020 | return ret; |
| 1021 | } |
| 1022 | |
| 1023 | /** |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 1024 | * ab8500_charger_set_vbus_in_curr() - set VBUS input current limit |
| 1025 | * @di: pointer to the ab8500_charger structure |
| 1026 | * @ich_in: charger input current limit |
| 1027 | * |
| 1028 | * Sets the current that can be drawn from the USB host |
| 1029 | * Returns error code in case of failure else 0(on success) |
| 1030 | */ |
| 1031 | static int ab8500_charger_set_vbus_in_curr(struct ab8500_charger *di, |
| 1032 | int ich_in) |
| 1033 | { |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 1034 | int min_value; |
| 1035 | |
| 1036 | /* We should always use to lowest current limit */ |
Lee Jones | b0284de | 2012-11-30 10:09:42 +0000 | [diff] [blame] | 1037 | min_value = min(di->bm->chg_params->usb_curr_max, ich_in); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 1038 | |
| 1039 | switch (min_value) { |
| 1040 | case 100: |
| 1041 | if (di->vbat < VBAT_TRESH_IP_CUR_RED) |
| 1042 | min_value = USB_CH_IP_CUR_LVL_0P05; |
| 1043 | break; |
| 1044 | case 500: |
| 1045 | if (di->vbat < VBAT_TRESH_IP_CUR_RED) |
| 1046 | min_value = USB_CH_IP_CUR_LVL_0P45; |
| 1047 | break; |
| 1048 | default: |
| 1049 | break; |
| 1050 | } |
| 1051 | |
Johan Bjornstedt | f8e96df | 2012-01-18 12:44:55 +0100 | [diff] [blame] | 1052 | return ab8500_charger_set_current(di, min_value, |
| 1053 | AB8500_USBCH_IPT_CRNTLVL_REG); |
| 1054 | } |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 1055 | |
Johan Bjornstedt | f8e96df | 2012-01-18 12:44:55 +0100 | [diff] [blame] | 1056 | /** |
| 1057 | * ab8500_charger_set_main_in_curr() - set main charger input current |
| 1058 | * @di: pointer to the ab8500_charger structure |
| 1059 | * @ich_in: input charger current, in mA |
| 1060 | * |
| 1061 | * Set main charger input current. |
| 1062 | * Returns error code in case of failure else 0(on success) |
| 1063 | */ |
| 1064 | static int ab8500_charger_set_main_in_curr(struct ab8500_charger *di, |
| 1065 | int ich_in) |
| 1066 | { |
| 1067 | return ab8500_charger_set_current(di, ich_in, |
| 1068 | AB8500_MCH_IPT_CURLVL_REG); |
| 1069 | } |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 1070 | |
Johan Bjornstedt | f8e96df | 2012-01-18 12:44:55 +0100 | [diff] [blame] | 1071 | /** |
| 1072 | * ab8500_charger_set_output_curr() - set charger output current |
| 1073 | * @di: pointer to the ab8500_charger structure |
| 1074 | * @ich_out: output charger current, in mA |
| 1075 | * |
| 1076 | * Set charger output current. |
| 1077 | * Returns error code in case of failure else 0(on success) |
| 1078 | */ |
| 1079 | static int ab8500_charger_set_output_curr(struct ab8500_charger *di, |
| 1080 | int ich_out) |
| 1081 | { |
| 1082 | return ab8500_charger_set_current(di, ich_out, |
| 1083 | AB8500_CH_OPT_CRNTLVL_REG); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 1084 | } |
| 1085 | |
| 1086 | /** |
| 1087 | * ab8500_charger_led_en() - turn on/off chargign led |
| 1088 | * @di: pointer to the ab8500_charger structure |
| 1089 | * @on: flag to turn on/off the chargign led |
| 1090 | * |
| 1091 | * Power ON/OFF charging LED indication |
| 1092 | * Returns error code in case of failure else 0(on success) |
| 1093 | */ |
| 1094 | static int ab8500_charger_led_en(struct ab8500_charger *di, int on) |
| 1095 | { |
| 1096 | int ret; |
| 1097 | |
| 1098 | if (on) { |
| 1099 | /* Power ON charging LED indicator, set LED current to 5mA */ |
| 1100 | ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, |
| 1101 | AB8500_LED_INDICATOR_PWM_CTRL, |
| 1102 | (LED_IND_CUR_5MA | LED_INDICATOR_PWM_ENA)); |
| 1103 | if (ret) { |
| 1104 | dev_err(di->dev, "Power ON LED failed\n"); |
| 1105 | return ret; |
| 1106 | } |
| 1107 | /* LED indicator PWM duty cycle 252/256 */ |
| 1108 | ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, |
| 1109 | AB8500_LED_INDICATOR_PWM_DUTY, |
| 1110 | LED_INDICATOR_PWM_DUTY_252_256); |
| 1111 | if (ret) { |
| 1112 | dev_err(di->dev, "Set LED PWM duty cycle failed\n"); |
| 1113 | return ret; |
| 1114 | } |
| 1115 | } else { |
| 1116 | /* Power off charging LED indicator */ |
| 1117 | ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, |
| 1118 | AB8500_LED_INDICATOR_PWM_CTRL, |
| 1119 | LED_INDICATOR_PWM_DIS); |
| 1120 | if (ret) { |
| 1121 | dev_err(di->dev, "Power-off LED failed\n"); |
| 1122 | return ret; |
| 1123 | } |
| 1124 | } |
| 1125 | |
| 1126 | return ret; |
| 1127 | } |
| 1128 | |
| 1129 | /** |
| 1130 | * ab8500_charger_ac_en() - enable or disable ac charging |
| 1131 | * @di: pointer to the ab8500_charger structure |
| 1132 | * @enable: enable/disable flag |
| 1133 | * @vset: charging voltage |
| 1134 | * @iset: charging current |
| 1135 | * |
| 1136 | * Enable/Disable AC/Mains charging and turns on/off the charging led |
| 1137 | * respectively. |
| 1138 | **/ |
| 1139 | static int ab8500_charger_ac_en(struct ux500_charger *charger, |
| 1140 | int enable, int vset, int iset) |
| 1141 | { |
| 1142 | int ret; |
| 1143 | int volt_index; |
| 1144 | int curr_index; |
| 1145 | int input_curr_index; |
| 1146 | u8 overshoot = 0; |
| 1147 | |
| 1148 | struct ab8500_charger *di = to_ab8500_charger_ac_device_info(charger); |
| 1149 | |
| 1150 | if (enable) { |
| 1151 | /* Check if AC is connected */ |
| 1152 | if (!di->ac.charger_connected) { |
| 1153 | dev_err(di->dev, "AC charger not connected\n"); |
| 1154 | return -ENXIO; |
| 1155 | } |
| 1156 | |
| 1157 | /* Enable AC charging */ |
| 1158 | dev_dbg(di->dev, "Enable AC: %dmV %dmA\n", vset, iset); |
| 1159 | |
| 1160 | /* |
| 1161 | * Due to a bug in AB8500, BTEMP_HIGH/LOW interrupts |
| 1162 | * will be triggered everytime we enable the VDD ADC supply. |
| 1163 | * This will turn off charging for a short while. |
| 1164 | * It can be avoided by having the supply on when |
| 1165 | * there is a charger enabled. Normally the VDD ADC supply |
| 1166 | * is enabled everytime a GPADC conversion is triggered. We will |
| 1167 | * force it to be enabled from this driver to have |
| 1168 | * the GPADC module independant of the AB8500 chargers |
| 1169 | */ |
| 1170 | if (!di->vddadc_en_ac) { |
| 1171 | regulator_enable(di->regu); |
| 1172 | di->vddadc_en_ac = true; |
| 1173 | } |
| 1174 | |
| 1175 | /* Check if the requested voltage or current is valid */ |
| 1176 | volt_index = ab8500_voltage_to_regval(vset); |
| 1177 | curr_index = ab8500_current_to_regval(iset); |
| 1178 | input_curr_index = ab8500_current_to_regval( |
Lee Jones | b0284de | 2012-11-30 10:09:42 +0000 | [diff] [blame] | 1179 | di->bm->chg_params->ac_curr_max); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 1180 | if (volt_index < 0 || curr_index < 0 || input_curr_index < 0) { |
| 1181 | dev_err(di->dev, |
| 1182 | "Charger voltage or current too high, " |
| 1183 | "charging not started\n"); |
| 1184 | return -ENXIO; |
| 1185 | } |
| 1186 | |
| 1187 | /* ChVoltLevel: maximum battery charging voltage */ |
| 1188 | ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, |
| 1189 | AB8500_CH_VOLT_LVL_REG, (u8) volt_index); |
| 1190 | if (ret) { |
| 1191 | dev_err(di->dev, "%s write failed\n", __func__); |
| 1192 | return ret; |
| 1193 | } |
| 1194 | /* MainChInputCurr: current that can be drawn from the charger*/ |
Johan Bjornstedt | f8e96df | 2012-01-18 12:44:55 +0100 | [diff] [blame] | 1195 | ret = ab8500_charger_set_main_in_curr(di, |
Lee Jones | b0284de | 2012-11-30 10:09:42 +0000 | [diff] [blame] | 1196 | di->bm->chg_params->ac_curr_max); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 1197 | if (ret) { |
Johan Bjornstedt | f8e96df | 2012-01-18 12:44:55 +0100 | [diff] [blame] | 1198 | dev_err(di->dev, "%s Failed to set MainChInputCurr\n", |
| 1199 | __func__); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 1200 | return ret; |
| 1201 | } |
| 1202 | /* ChOutputCurentLevel: protected output current */ |
Johan Bjornstedt | f8e96df | 2012-01-18 12:44:55 +0100 | [diff] [blame] | 1203 | ret = ab8500_charger_set_output_curr(di, iset); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 1204 | if (ret) { |
Johan Bjornstedt | f8e96df | 2012-01-18 12:44:55 +0100 | [diff] [blame] | 1205 | dev_err(di->dev, "%s " |
| 1206 | "Failed to set ChOutputCurentLevel\n", |
| 1207 | __func__); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 1208 | return ret; |
| 1209 | } |
| 1210 | |
| 1211 | /* Check if VBAT overshoot control should be enabled */ |
Lee Jones | b0284de | 2012-11-30 10:09:42 +0000 | [diff] [blame] | 1212 | if (!di->bm->enable_overshoot) |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 1213 | overshoot = MAIN_CH_NO_OVERSHOOT_ENA_N; |
| 1214 | |
| 1215 | /* Enable Main Charger */ |
| 1216 | ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, |
| 1217 | AB8500_MCH_CTRL1, MAIN_CH_ENA | overshoot); |
| 1218 | if (ret) { |
| 1219 | dev_err(di->dev, "%s write failed\n", __func__); |
| 1220 | return ret; |
| 1221 | } |
| 1222 | |
| 1223 | /* Power on charging LED indication */ |
| 1224 | ret = ab8500_charger_led_en(di, true); |
| 1225 | if (ret < 0) |
| 1226 | dev_err(di->dev, "failed to enable LED\n"); |
| 1227 | |
| 1228 | di->ac.charger_online = 1; |
| 1229 | } else { |
| 1230 | /* Disable AC charging */ |
| 1231 | if (is_ab8500_1p1_or_earlier(di->parent)) { |
| 1232 | /* |
| 1233 | * For ABB revision 1.0 and 1.1 there is a bug in the |
| 1234 | * watchdog logic. That means we have to continously |
| 1235 | * kick the charger watchdog even when no charger is |
| 1236 | * connected. This is only valid once the AC charger |
| 1237 | * has been enabled. This is a bug that is not handled |
| 1238 | * by the algorithm and the watchdog have to be kicked |
| 1239 | * by the charger driver when the AC charger |
| 1240 | * is disabled |
| 1241 | */ |
| 1242 | if (di->ac_conn) { |
| 1243 | queue_delayed_work(di->charger_wq, |
| 1244 | &di->kick_wd_work, |
| 1245 | round_jiffies(WD_KICK_INTERVAL)); |
| 1246 | } |
| 1247 | |
| 1248 | /* |
| 1249 | * We can't turn off charging completely |
| 1250 | * due to a bug in AB8500 cut1. |
| 1251 | * If we do, charging will not start again. |
| 1252 | * That is why we set the lowest voltage |
| 1253 | * and current possible |
| 1254 | */ |
| 1255 | ret = abx500_set_register_interruptible(di->dev, |
| 1256 | AB8500_CHARGER, |
| 1257 | AB8500_CH_VOLT_LVL_REG, CH_VOL_LVL_3P5); |
| 1258 | if (ret) { |
| 1259 | dev_err(di->dev, |
| 1260 | "%s write failed\n", __func__); |
| 1261 | return ret; |
| 1262 | } |
| 1263 | |
Johan Bjornstedt | f8e96df | 2012-01-18 12:44:55 +0100 | [diff] [blame] | 1264 | ret = ab8500_charger_set_output_curr(di, 0); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 1265 | if (ret) { |
Johan Bjornstedt | f8e96df | 2012-01-18 12:44:55 +0100 | [diff] [blame] | 1266 | dev_err(di->dev, "%s " |
| 1267 | "Failed to set ChOutputCurentLevel\n", |
| 1268 | __func__); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 1269 | return ret; |
| 1270 | } |
| 1271 | } else { |
| 1272 | ret = abx500_set_register_interruptible(di->dev, |
| 1273 | AB8500_CHARGER, |
| 1274 | AB8500_MCH_CTRL1, 0); |
| 1275 | if (ret) { |
| 1276 | dev_err(di->dev, |
| 1277 | "%s write failed\n", __func__); |
| 1278 | return ret; |
| 1279 | } |
| 1280 | } |
| 1281 | |
| 1282 | ret = ab8500_charger_led_en(di, false); |
| 1283 | if (ret < 0) |
| 1284 | dev_err(di->dev, "failed to disable LED\n"); |
| 1285 | |
| 1286 | di->ac.charger_online = 0; |
| 1287 | di->ac.wd_expired = false; |
| 1288 | |
| 1289 | /* Disable regulator if enabled */ |
| 1290 | if (di->vddadc_en_ac) { |
| 1291 | regulator_disable(di->regu); |
| 1292 | di->vddadc_en_ac = false; |
| 1293 | } |
| 1294 | |
| 1295 | dev_dbg(di->dev, "%s Disabled AC charging\n", __func__); |
| 1296 | } |
| 1297 | ab8500_power_supply_changed(di, &di->ac_chg.psy); |
| 1298 | |
| 1299 | return ret; |
| 1300 | } |
| 1301 | |
| 1302 | /** |
| 1303 | * ab8500_charger_usb_en() - enable usb charging |
| 1304 | * @di: pointer to the ab8500_charger structure |
| 1305 | * @enable: enable/disable flag |
| 1306 | * @vset: charging voltage |
| 1307 | * @ich_out: charger output current |
| 1308 | * |
| 1309 | * Enable/Disable USB charging and turns on/off the charging led respectively. |
| 1310 | * Returns error code in case of failure else 0(on success) |
| 1311 | */ |
| 1312 | static int ab8500_charger_usb_en(struct ux500_charger *charger, |
| 1313 | int enable, int vset, int ich_out) |
| 1314 | { |
| 1315 | int ret; |
| 1316 | int volt_index; |
| 1317 | int curr_index; |
| 1318 | u8 overshoot = 0; |
| 1319 | |
| 1320 | struct ab8500_charger *di = to_ab8500_charger_usb_device_info(charger); |
| 1321 | |
| 1322 | if (enable) { |
| 1323 | /* Check if USB is connected */ |
| 1324 | if (!di->usb.charger_connected) { |
| 1325 | dev_err(di->dev, "USB charger not connected\n"); |
| 1326 | return -ENXIO; |
| 1327 | } |
| 1328 | |
| 1329 | /* |
| 1330 | * Due to a bug in AB8500, BTEMP_HIGH/LOW interrupts |
| 1331 | * will be triggered everytime we enable the VDD ADC supply. |
| 1332 | * This will turn off charging for a short while. |
| 1333 | * It can be avoided by having the supply on when |
| 1334 | * there is a charger enabled. Normally the VDD ADC supply |
| 1335 | * is enabled everytime a GPADC conversion is triggered. We will |
| 1336 | * force it to be enabled from this driver to have |
| 1337 | * the GPADC module independant of the AB8500 chargers |
| 1338 | */ |
| 1339 | if (!di->vddadc_en_usb) { |
| 1340 | regulator_enable(di->regu); |
| 1341 | di->vddadc_en_usb = true; |
| 1342 | } |
| 1343 | |
| 1344 | /* Enable USB charging */ |
| 1345 | dev_dbg(di->dev, "Enable USB: %dmV %dmA\n", vset, ich_out); |
| 1346 | |
| 1347 | /* Check if the requested voltage or current is valid */ |
| 1348 | volt_index = ab8500_voltage_to_regval(vset); |
| 1349 | curr_index = ab8500_current_to_regval(ich_out); |
| 1350 | if (volt_index < 0 || curr_index < 0) { |
| 1351 | dev_err(di->dev, |
| 1352 | "Charger voltage or current too high, " |
| 1353 | "charging not started\n"); |
| 1354 | return -ENXIO; |
| 1355 | } |
| 1356 | |
| 1357 | /* ChVoltLevel: max voltage upto which battery can be charged */ |
| 1358 | ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, |
| 1359 | AB8500_CH_VOLT_LVL_REG, (u8) volt_index); |
| 1360 | if (ret) { |
| 1361 | dev_err(di->dev, "%s write failed\n", __func__); |
| 1362 | return ret; |
| 1363 | } |
| 1364 | /* USBChInputCurr: current that can be drawn from the usb */ |
| 1365 | ret = ab8500_charger_set_vbus_in_curr(di, di->max_usb_in_curr); |
| 1366 | if (ret) { |
| 1367 | dev_err(di->dev, "setting USBChInputCurr failed\n"); |
| 1368 | return ret; |
| 1369 | } |
| 1370 | /* ChOutputCurentLevel: protected output current */ |
Johan Bjornstedt | f8e96df | 2012-01-18 12:44:55 +0100 | [diff] [blame] | 1371 | ret = ab8500_charger_set_output_curr(di, ich_out); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 1372 | if (ret) { |
Johan Bjornstedt | f8e96df | 2012-01-18 12:44:55 +0100 | [diff] [blame] | 1373 | dev_err(di->dev, "%s " |
| 1374 | "Failed to set ChOutputCurentLevel\n", |
| 1375 | __func__); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 1376 | return ret; |
| 1377 | } |
| 1378 | /* Check if VBAT overshoot control should be enabled */ |
Lee Jones | b0284de | 2012-11-30 10:09:42 +0000 | [diff] [blame] | 1379 | if (!di->bm->enable_overshoot) |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 1380 | overshoot = USB_CHG_NO_OVERSHOOT_ENA_N; |
| 1381 | |
| 1382 | /* Enable USB Charger */ |
| 1383 | ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, |
| 1384 | AB8500_USBCH_CTRL1_REG, USB_CH_ENA | overshoot); |
| 1385 | if (ret) { |
| 1386 | dev_err(di->dev, "%s write failed\n", __func__); |
| 1387 | return ret; |
| 1388 | } |
| 1389 | |
| 1390 | /* If success power on charging LED indication */ |
| 1391 | ret = ab8500_charger_led_en(di, true); |
| 1392 | if (ret < 0) |
| 1393 | dev_err(di->dev, "failed to enable LED\n"); |
| 1394 | |
| 1395 | queue_delayed_work(di->charger_wq, &di->check_vbat_work, HZ); |
| 1396 | |
| 1397 | di->usb.charger_online = 1; |
| 1398 | } else { |
| 1399 | /* Disable USB charging */ |
| 1400 | ret = abx500_set_register_interruptible(di->dev, |
| 1401 | AB8500_CHARGER, |
| 1402 | AB8500_USBCH_CTRL1_REG, 0); |
| 1403 | if (ret) { |
| 1404 | dev_err(di->dev, |
| 1405 | "%s write failed\n", __func__); |
| 1406 | return ret; |
| 1407 | } |
| 1408 | |
| 1409 | ret = ab8500_charger_led_en(di, false); |
| 1410 | if (ret < 0) |
| 1411 | dev_err(di->dev, "failed to disable LED\n"); |
| 1412 | |
| 1413 | di->usb.charger_online = 0; |
| 1414 | di->usb.wd_expired = false; |
| 1415 | |
| 1416 | /* Disable regulator if enabled */ |
| 1417 | if (di->vddadc_en_usb) { |
| 1418 | regulator_disable(di->regu); |
| 1419 | di->vddadc_en_usb = false; |
| 1420 | } |
| 1421 | |
| 1422 | dev_dbg(di->dev, "%s Disabled USB charging\n", __func__); |
| 1423 | |
| 1424 | /* Cancel any pending Vbat check work */ |
| 1425 | if (delayed_work_pending(&di->check_vbat_work)) |
| 1426 | cancel_delayed_work(&di->check_vbat_work); |
| 1427 | |
| 1428 | } |
| 1429 | ab8500_power_supply_changed(di, &di->usb_chg.psy); |
| 1430 | |
| 1431 | return ret; |
| 1432 | } |
| 1433 | |
| 1434 | /** |
| 1435 | * ab8500_charger_watchdog_kick() - kick charger watchdog |
| 1436 | * @di: pointer to the ab8500_charger structure |
| 1437 | * |
| 1438 | * Kick charger watchdog |
| 1439 | * Returns error code in case of failure else 0(on success) |
| 1440 | */ |
| 1441 | static int ab8500_charger_watchdog_kick(struct ux500_charger *charger) |
| 1442 | { |
| 1443 | int ret; |
| 1444 | struct ab8500_charger *di; |
| 1445 | |
| 1446 | if (charger->psy.type == POWER_SUPPLY_TYPE_MAINS) |
| 1447 | di = to_ab8500_charger_ac_device_info(charger); |
| 1448 | else if (charger->psy.type == POWER_SUPPLY_TYPE_USB) |
| 1449 | di = to_ab8500_charger_usb_device_info(charger); |
| 1450 | else |
| 1451 | return -ENXIO; |
| 1452 | |
| 1453 | ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, |
| 1454 | AB8500_CHARG_WD_CTRL, CHARG_WD_KICK); |
| 1455 | if (ret) |
| 1456 | dev_err(di->dev, "Failed to kick WD!\n"); |
| 1457 | |
| 1458 | return ret; |
| 1459 | } |
| 1460 | |
| 1461 | /** |
| 1462 | * ab8500_charger_update_charger_current() - update charger current |
| 1463 | * @di: pointer to the ab8500_charger structure |
| 1464 | * |
| 1465 | * Update the charger output current for the specified charger |
| 1466 | * Returns error code in case of failure else 0(on success) |
| 1467 | */ |
| 1468 | static int ab8500_charger_update_charger_current(struct ux500_charger *charger, |
| 1469 | int ich_out) |
| 1470 | { |
| 1471 | int ret; |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 1472 | struct ab8500_charger *di; |
| 1473 | |
| 1474 | if (charger->psy.type == POWER_SUPPLY_TYPE_MAINS) |
| 1475 | di = to_ab8500_charger_ac_device_info(charger); |
| 1476 | else if (charger->psy.type == POWER_SUPPLY_TYPE_USB) |
| 1477 | di = to_ab8500_charger_usb_device_info(charger); |
| 1478 | else |
| 1479 | return -ENXIO; |
| 1480 | |
Johan Bjornstedt | f8e96df | 2012-01-18 12:44:55 +0100 | [diff] [blame] | 1481 | ret = ab8500_charger_set_output_curr(di, ich_out); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 1482 | if (ret) { |
Johan Bjornstedt | f8e96df | 2012-01-18 12:44:55 +0100 | [diff] [blame] | 1483 | dev_err(di->dev, "%s " |
| 1484 | "Failed to set ChOutputCurentLevel\n", |
| 1485 | __func__); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 1486 | return ret; |
| 1487 | } |
| 1488 | |
| 1489 | /* Reset the main and usb drop input current measurement counter */ |
| 1490 | ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, |
| 1491 | AB8500_CHARGER_CTRL, |
| 1492 | 0x1); |
| 1493 | if (ret) { |
| 1494 | dev_err(di->dev, "%s write failed\n", __func__); |
| 1495 | return ret; |
| 1496 | } |
| 1497 | |
| 1498 | return ret; |
| 1499 | } |
| 1500 | |
| 1501 | static int ab8500_charger_get_ext_psy_data(struct device *dev, void *data) |
| 1502 | { |
| 1503 | struct power_supply *psy; |
| 1504 | struct power_supply *ext; |
| 1505 | struct ab8500_charger *di; |
| 1506 | union power_supply_propval ret; |
| 1507 | int i, j; |
| 1508 | bool psy_found = false; |
| 1509 | struct ux500_charger *usb_chg; |
| 1510 | |
| 1511 | usb_chg = (struct ux500_charger *)data; |
| 1512 | psy = &usb_chg->psy; |
| 1513 | |
| 1514 | di = to_ab8500_charger_usb_device_info(usb_chg); |
| 1515 | |
| 1516 | ext = dev_get_drvdata(dev); |
| 1517 | |
| 1518 | /* For all psy where the driver name appears in any supplied_to */ |
| 1519 | for (i = 0; i < ext->num_supplicants; i++) { |
| 1520 | if (!strcmp(ext->supplied_to[i], psy->name)) |
| 1521 | psy_found = true; |
| 1522 | } |
| 1523 | |
| 1524 | if (!psy_found) |
| 1525 | return 0; |
| 1526 | |
| 1527 | /* Go through all properties for the psy */ |
| 1528 | for (j = 0; j < ext->num_properties; j++) { |
| 1529 | enum power_supply_property prop; |
| 1530 | prop = ext->properties[j]; |
| 1531 | |
| 1532 | if (ext->get_property(ext, prop, &ret)) |
| 1533 | continue; |
| 1534 | |
| 1535 | switch (prop) { |
| 1536 | case POWER_SUPPLY_PROP_VOLTAGE_NOW: |
| 1537 | switch (ext->type) { |
| 1538 | case POWER_SUPPLY_TYPE_BATTERY: |
| 1539 | di->vbat = ret.intval / 1000; |
| 1540 | break; |
| 1541 | default: |
| 1542 | break; |
| 1543 | } |
| 1544 | break; |
| 1545 | default: |
| 1546 | break; |
| 1547 | } |
| 1548 | } |
| 1549 | return 0; |
| 1550 | } |
| 1551 | |
| 1552 | /** |
| 1553 | * ab8500_charger_check_vbat_work() - keep vbus current within spec |
| 1554 | * @work pointer to the work_struct structure |
| 1555 | * |
| 1556 | * Due to a asic bug it is necessary to lower the input current to the vbus |
| 1557 | * charger when charging with at some specific levels. This issue is only valid |
| 1558 | * for below a certain battery voltage. This function makes sure that the |
| 1559 | * the allowed current limit isn't exceeded. |
| 1560 | */ |
| 1561 | static void ab8500_charger_check_vbat_work(struct work_struct *work) |
| 1562 | { |
| 1563 | int t = 10; |
| 1564 | struct ab8500_charger *di = container_of(work, |
| 1565 | struct ab8500_charger, check_vbat_work.work); |
| 1566 | |
| 1567 | class_for_each_device(power_supply_class, NULL, |
| 1568 | &di->usb_chg.psy, ab8500_charger_get_ext_psy_data); |
| 1569 | |
| 1570 | /* First run old_vbat is 0. */ |
| 1571 | if (di->old_vbat == 0) |
| 1572 | di->old_vbat = di->vbat; |
| 1573 | |
| 1574 | if (!((di->old_vbat <= VBAT_TRESH_IP_CUR_RED && |
| 1575 | di->vbat <= VBAT_TRESH_IP_CUR_RED) || |
| 1576 | (di->old_vbat > VBAT_TRESH_IP_CUR_RED && |
| 1577 | di->vbat > VBAT_TRESH_IP_CUR_RED))) { |
| 1578 | |
| 1579 | dev_dbg(di->dev, "Vbat did cross threshold, curr: %d, new: %d," |
| 1580 | " old: %d\n", di->max_usb_in_curr, di->vbat, |
| 1581 | di->old_vbat); |
| 1582 | ab8500_charger_set_vbus_in_curr(di, di->max_usb_in_curr); |
| 1583 | power_supply_changed(&di->usb_chg.psy); |
| 1584 | } |
| 1585 | |
| 1586 | di->old_vbat = di->vbat; |
| 1587 | |
| 1588 | /* |
| 1589 | * No need to check the battery voltage every second when not close to |
| 1590 | * the threshold. |
| 1591 | */ |
| 1592 | if (di->vbat < (VBAT_TRESH_IP_CUR_RED + 100) && |
| 1593 | (di->vbat > (VBAT_TRESH_IP_CUR_RED - 100))) |
| 1594 | t = 1; |
| 1595 | |
| 1596 | queue_delayed_work(di->charger_wq, &di->check_vbat_work, t * HZ); |
| 1597 | } |
| 1598 | |
| 1599 | /** |
| 1600 | * ab8500_charger_check_hw_failure_work() - check main charger failure |
| 1601 | * @work: pointer to the work_struct structure |
| 1602 | * |
| 1603 | * Work queue function for checking the main charger status |
| 1604 | */ |
| 1605 | static void ab8500_charger_check_hw_failure_work(struct work_struct *work) |
| 1606 | { |
| 1607 | int ret; |
| 1608 | u8 reg_value; |
| 1609 | |
| 1610 | struct ab8500_charger *di = container_of(work, |
| 1611 | struct ab8500_charger, check_hw_failure_work.work); |
| 1612 | |
| 1613 | /* Check if the status bits for HW failure is still active */ |
| 1614 | if (di->flags.mainextchnotok) { |
| 1615 | ret = abx500_get_register_interruptible(di->dev, |
| 1616 | AB8500_CHARGER, AB8500_CH_STATUS2_REG, ®_value); |
| 1617 | if (ret < 0) { |
| 1618 | dev_err(di->dev, "%s ab8500 read failed\n", __func__); |
| 1619 | return; |
| 1620 | } |
| 1621 | if (!(reg_value & MAIN_CH_NOK)) { |
| 1622 | di->flags.mainextchnotok = false; |
| 1623 | ab8500_power_supply_changed(di, &di->ac_chg.psy); |
| 1624 | } |
| 1625 | } |
| 1626 | if (di->flags.vbus_ovv) { |
| 1627 | ret = abx500_get_register_interruptible(di->dev, |
| 1628 | AB8500_CHARGER, AB8500_CH_USBCH_STAT2_REG, |
| 1629 | ®_value); |
| 1630 | if (ret < 0) { |
| 1631 | dev_err(di->dev, "%s ab8500 read failed\n", __func__); |
| 1632 | return; |
| 1633 | } |
| 1634 | if (!(reg_value & VBUS_OVV_TH)) { |
| 1635 | di->flags.vbus_ovv = false; |
| 1636 | ab8500_power_supply_changed(di, &di->usb_chg.psy); |
| 1637 | } |
| 1638 | } |
| 1639 | /* If we still have a failure, schedule a new check */ |
| 1640 | if (di->flags.mainextchnotok || di->flags.vbus_ovv) { |
| 1641 | queue_delayed_work(di->charger_wq, |
| 1642 | &di->check_hw_failure_work, round_jiffies(HZ)); |
| 1643 | } |
| 1644 | } |
| 1645 | |
| 1646 | /** |
| 1647 | * ab8500_charger_kick_watchdog_work() - kick the watchdog |
| 1648 | * @work: pointer to the work_struct structure |
| 1649 | * |
| 1650 | * Work queue function for kicking the charger watchdog. |
| 1651 | * |
| 1652 | * For ABB revision 1.0 and 1.1 there is a bug in the watchdog |
| 1653 | * logic. That means we have to continously kick the charger |
| 1654 | * watchdog even when no charger is connected. This is only |
| 1655 | * valid once the AC charger has been enabled. This is |
| 1656 | * a bug that is not handled by the algorithm and the |
| 1657 | * watchdog have to be kicked by the charger driver |
| 1658 | * when the AC charger is disabled |
| 1659 | */ |
| 1660 | static void ab8500_charger_kick_watchdog_work(struct work_struct *work) |
| 1661 | { |
| 1662 | int ret; |
| 1663 | |
| 1664 | struct ab8500_charger *di = container_of(work, |
| 1665 | struct ab8500_charger, kick_wd_work.work); |
| 1666 | |
| 1667 | ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, |
| 1668 | AB8500_CHARG_WD_CTRL, CHARG_WD_KICK); |
| 1669 | if (ret) |
| 1670 | dev_err(di->dev, "Failed to kick WD!\n"); |
| 1671 | |
| 1672 | /* Schedule a new watchdog kick */ |
| 1673 | queue_delayed_work(di->charger_wq, |
| 1674 | &di->kick_wd_work, round_jiffies(WD_KICK_INTERVAL)); |
| 1675 | } |
| 1676 | |
| 1677 | /** |
| 1678 | * ab8500_charger_ac_work() - work to get and set main charger status |
| 1679 | * @work: pointer to the work_struct structure |
| 1680 | * |
| 1681 | * Work queue function for checking the main charger status |
| 1682 | */ |
| 1683 | static void ab8500_charger_ac_work(struct work_struct *work) |
| 1684 | { |
| 1685 | int ret; |
| 1686 | |
| 1687 | struct ab8500_charger *di = container_of(work, |
| 1688 | struct ab8500_charger, ac_work); |
| 1689 | |
| 1690 | /* |
| 1691 | * Since we can't be sure that the events are received |
| 1692 | * synchronously, we have the check if the main charger is |
| 1693 | * connected by reading the status register |
| 1694 | */ |
| 1695 | ret = ab8500_charger_detect_chargers(di); |
| 1696 | if (ret < 0) |
| 1697 | return; |
| 1698 | |
| 1699 | if (ret & AC_PW_CONN) { |
| 1700 | di->ac.charger_connected = 1; |
| 1701 | di->ac_conn = true; |
| 1702 | } else { |
| 1703 | di->ac.charger_connected = 0; |
| 1704 | } |
| 1705 | |
| 1706 | ab8500_power_supply_changed(di, &di->ac_chg.psy); |
| 1707 | sysfs_notify(&di->ac_chg.psy.dev->kobj, NULL, "present"); |
| 1708 | } |
| 1709 | |
| 1710 | /** |
| 1711 | * ab8500_charger_detect_usb_type_work() - work to detect USB type |
| 1712 | * @work: Pointer to the work_struct structure |
| 1713 | * |
| 1714 | * Detect the type of USB plugged |
| 1715 | */ |
Anton Vorontsov | 64eb9b0 | 2012-03-14 04:43:11 +0400 | [diff] [blame] | 1716 | static void ab8500_charger_detect_usb_type_work(struct work_struct *work) |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 1717 | { |
| 1718 | int ret; |
| 1719 | |
| 1720 | struct ab8500_charger *di = container_of(work, |
| 1721 | struct ab8500_charger, detect_usb_type_work); |
| 1722 | |
| 1723 | /* |
| 1724 | * Since we can't be sure that the events are received |
| 1725 | * synchronously, we have the check if is |
| 1726 | * connected by reading the status register |
| 1727 | */ |
| 1728 | ret = ab8500_charger_detect_chargers(di); |
| 1729 | if (ret < 0) |
| 1730 | return; |
| 1731 | |
| 1732 | if (!(ret & USB_PW_CONN)) { |
| 1733 | di->vbus_detected = 0; |
| 1734 | ab8500_charger_set_usb_connected(di, false); |
| 1735 | ab8500_power_supply_changed(di, &di->usb_chg.psy); |
| 1736 | } else { |
| 1737 | di->vbus_detected = 1; |
| 1738 | |
| 1739 | if (is_ab8500_1p1_or_earlier(di->parent)) { |
| 1740 | ret = ab8500_charger_detect_usb_type(di); |
| 1741 | if (!ret) { |
| 1742 | ab8500_charger_set_usb_connected(di, true); |
| 1743 | ab8500_power_supply_changed(di, |
| 1744 | &di->usb_chg.psy); |
| 1745 | } |
| 1746 | } else { |
| 1747 | /* For ABB cut2.0 and onwards we have an IRQ, |
| 1748 | * USB_LINK_STATUS that will be triggered when the USB |
| 1749 | * link status changes. The exception is USB connected |
| 1750 | * during startup. Then we don't get a |
| 1751 | * USB_LINK_STATUS IRQ |
| 1752 | */ |
| 1753 | if (di->vbus_detected_start) { |
| 1754 | di->vbus_detected_start = false; |
| 1755 | ret = ab8500_charger_detect_usb_type(di); |
| 1756 | if (!ret) { |
| 1757 | ab8500_charger_set_usb_connected(di, |
| 1758 | true); |
| 1759 | ab8500_power_supply_changed(di, |
| 1760 | &di->usb_chg.psy); |
| 1761 | } |
| 1762 | } |
| 1763 | } |
| 1764 | } |
| 1765 | } |
| 1766 | |
| 1767 | /** |
| 1768 | * ab8500_charger_usb_link_status_work() - work to detect USB type |
| 1769 | * @work: pointer to the work_struct structure |
| 1770 | * |
| 1771 | * Detect the type of USB plugged |
| 1772 | */ |
| 1773 | static void ab8500_charger_usb_link_status_work(struct work_struct *work) |
| 1774 | { |
| 1775 | int ret; |
| 1776 | |
| 1777 | struct ab8500_charger *di = container_of(work, |
| 1778 | struct ab8500_charger, usb_link_status_work); |
| 1779 | |
| 1780 | /* |
| 1781 | * Since we can't be sure that the events are received |
| 1782 | * synchronously, we have the check if is |
| 1783 | * connected by reading the status register |
| 1784 | */ |
| 1785 | ret = ab8500_charger_detect_chargers(di); |
| 1786 | if (ret < 0) |
| 1787 | return; |
| 1788 | |
| 1789 | if (!(ret & USB_PW_CONN)) { |
| 1790 | di->vbus_detected = 0; |
| 1791 | ab8500_charger_set_usb_connected(di, false); |
| 1792 | ab8500_power_supply_changed(di, &di->usb_chg.psy); |
| 1793 | } else { |
| 1794 | di->vbus_detected = 1; |
| 1795 | ret = ab8500_charger_read_usb_type(di); |
| 1796 | if (!ret) { |
| 1797 | /* Update maximum input current */ |
| 1798 | ret = ab8500_charger_set_vbus_in_curr(di, |
| 1799 | di->max_usb_in_curr); |
| 1800 | if (ret) |
| 1801 | return; |
| 1802 | |
| 1803 | ab8500_charger_set_usb_connected(di, true); |
| 1804 | ab8500_power_supply_changed(di, &di->usb_chg.psy); |
| 1805 | } else if (ret == -ENXIO) { |
| 1806 | /* No valid charger type detected */ |
| 1807 | ab8500_charger_set_usb_connected(di, false); |
| 1808 | ab8500_power_supply_changed(di, &di->usb_chg.psy); |
| 1809 | } |
| 1810 | } |
| 1811 | } |
| 1812 | |
| 1813 | static void ab8500_charger_usb_state_changed_work(struct work_struct *work) |
| 1814 | { |
| 1815 | int ret; |
| 1816 | unsigned long flags; |
| 1817 | |
| 1818 | struct ab8500_charger *di = container_of(work, |
| 1819 | struct ab8500_charger, usb_state_changed_work); |
| 1820 | |
| 1821 | if (!di->vbus_detected) |
| 1822 | return; |
| 1823 | |
| 1824 | spin_lock_irqsave(&di->usb_state.usb_lock, flags); |
| 1825 | di->usb_state.usb_changed = false; |
| 1826 | spin_unlock_irqrestore(&di->usb_state.usb_lock, flags); |
| 1827 | |
| 1828 | /* |
| 1829 | * wait for some time until you get updates from the usb stack |
| 1830 | * and negotiations are completed |
| 1831 | */ |
| 1832 | msleep(250); |
| 1833 | |
| 1834 | if (di->usb_state.usb_changed) |
| 1835 | return; |
| 1836 | |
| 1837 | dev_dbg(di->dev, "%s USB state: 0x%02x mA: %d\n", |
| 1838 | __func__, di->usb_state.state, di->usb_state.usb_current); |
| 1839 | |
| 1840 | switch (di->usb_state.state) { |
| 1841 | case AB8500_BM_USB_STATE_RESET_HS: |
| 1842 | case AB8500_BM_USB_STATE_RESET_FS: |
| 1843 | case AB8500_BM_USB_STATE_SUSPEND: |
| 1844 | case AB8500_BM_USB_STATE_MAX: |
| 1845 | ab8500_charger_set_usb_connected(di, false); |
| 1846 | ab8500_power_supply_changed(di, &di->usb_chg.psy); |
| 1847 | break; |
| 1848 | |
| 1849 | case AB8500_BM_USB_STATE_RESUME: |
| 1850 | /* |
| 1851 | * when suspend->resume there should be delay |
| 1852 | * of 1sec for enabling charging |
| 1853 | */ |
| 1854 | msleep(1000); |
| 1855 | /* Intentional fall through */ |
| 1856 | case AB8500_BM_USB_STATE_CONFIGURED: |
| 1857 | /* |
| 1858 | * USB is configured, enable charging with the charging |
| 1859 | * input current obtained from USB driver |
| 1860 | */ |
| 1861 | if (!ab8500_charger_get_usb_cur(di)) { |
| 1862 | /* Update maximum input current */ |
| 1863 | ret = ab8500_charger_set_vbus_in_curr(di, |
| 1864 | di->max_usb_in_curr); |
| 1865 | if (ret) |
| 1866 | return; |
| 1867 | |
| 1868 | ab8500_charger_set_usb_connected(di, true); |
| 1869 | ab8500_power_supply_changed(di, &di->usb_chg.psy); |
| 1870 | } |
| 1871 | break; |
| 1872 | |
| 1873 | default: |
| 1874 | break; |
| 1875 | }; |
| 1876 | } |
| 1877 | |
| 1878 | /** |
| 1879 | * ab8500_charger_check_usbchargernotok_work() - check USB chg not ok status |
| 1880 | * @work: pointer to the work_struct structure |
| 1881 | * |
| 1882 | * Work queue function for checking the USB charger Not OK status |
| 1883 | */ |
| 1884 | static void ab8500_charger_check_usbchargernotok_work(struct work_struct *work) |
| 1885 | { |
| 1886 | int ret; |
| 1887 | u8 reg_value; |
| 1888 | bool prev_status; |
| 1889 | |
| 1890 | struct ab8500_charger *di = container_of(work, |
| 1891 | struct ab8500_charger, check_usbchgnotok_work.work); |
| 1892 | |
| 1893 | /* Check if the status bit for usbchargernotok is still active */ |
| 1894 | ret = abx500_get_register_interruptible(di->dev, |
| 1895 | AB8500_CHARGER, AB8500_CH_USBCH_STAT2_REG, ®_value); |
| 1896 | if (ret < 0) { |
| 1897 | dev_err(di->dev, "%s ab8500 read failed\n", __func__); |
| 1898 | return; |
| 1899 | } |
| 1900 | prev_status = di->flags.usbchargernotok; |
| 1901 | |
| 1902 | if (reg_value & VBUS_CH_NOK) { |
| 1903 | di->flags.usbchargernotok = true; |
| 1904 | /* Check again in 1sec */ |
| 1905 | queue_delayed_work(di->charger_wq, |
| 1906 | &di->check_usbchgnotok_work, HZ); |
| 1907 | } else { |
| 1908 | di->flags.usbchargernotok = false; |
| 1909 | di->flags.vbus_collapse = false; |
| 1910 | } |
| 1911 | |
| 1912 | if (prev_status != di->flags.usbchargernotok) |
| 1913 | ab8500_power_supply_changed(di, &di->usb_chg.psy); |
| 1914 | } |
| 1915 | |
| 1916 | /** |
| 1917 | * ab8500_charger_check_main_thermal_prot_work() - check main thermal status |
| 1918 | * @work: pointer to the work_struct structure |
| 1919 | * |
| 1920 | * Work queue function for checking the Main thermal prot status |
| 1921 | */ |
| 1922 | static void ab8500_charger_check_main_thermal_prot_work( |
| 1923 | struct work_struct *work) |
| 1924 | { |
| 1925 | int ret; |
| 1926 | u8 reg_value; |
| 1927 | |
| 1928 | struct ab8500_charger *di = container_of(work, |
| 1929 | struct ab8500_charger, check_main_thermal_prot_work); |
| 1930 | |
| 1931 | /* Check if the status bit for main_thermal_prot is still active */ |
| 1932 | ret = abx500_get_register_interruptible(di->dev, |
| 1933 | AB8500_CHARGER, AB8500_CH_STATUS2_REG, ®_value); |
| 1934 | if (ret < 0) { |
| 1935 | dev_err(di->dev, "%s ab8500 read failed\n", __func__); |
| 1936 | return; |
| 1937 | } |
| 1938 | if (reg_value & MAIN_CH_TH_PROT) |
| 1939 | di->flags.main_thermal_prot = true; |
| 1940 | else |
| 1941 | di->flags.main_thermal_prot = false; |
| 1942 | |
| 1943 | ab8500_power_supply_changed(di, &di->ac_chg.psy); |
| 1944 | } |
| 1945 | |
| 1946 | /** |
| 1947 | * ab8500_charger_check_usb_thermal_prot_work() - check usb thermal status |
| 1948 | * @work: pointer to the work_struct structure |
| 1949 | * |
| 1950 | * Work queue function for checking the USB thermal prot status |
| 1951 | */ |
| 1952 | static void ab8500_charger_check_usb_thermal_prot_work( |
| 1953 | struct work_struct *work) |
| 1954 | { |
| 1955 | int ret; |
| 1956 | u8 reg_value; |
| 1957 | |
| 1958 | struct ab8500_charger *di = container_of(work, |
| 1959 | struct ab8500_charger, check_usb_thermal_prot_work); |
| 1960 | |
| 1961 | /* Check if the status bit for usb_thermal_prot is still active */ |
| 1962 | ret = abx500_get_register_interruptible(di->dev, |
| 1963 | AB8500_CHARGER, AB8500_CH_USBCH_STAT2_REG, ®_value); |
| 1964 | if (ret < 0) { |
| 1965 | dev_err(di->dev, "%s ab8500 read failed\n", __func__); |
| 1966 | return; |
| 1967 | } |
| 1968 | if (reg_value & USB_CH_TH_PROT) |
| 1969 | di->flags.usb_thermal_prot = true; |
| 1970 | else |
| 1971 | di->flags.usb_thermal_prot = false; |
| 1972 | |
| 1973 | ab8500_power_supply_changed(di, &di->usb_chg.psy); |
| 1974 | } |
| 1975 | |
| 1976 | /** |
| 1977 | * ab8500_charger_mainchunplugdet_handler() - main charger unplugged |
| 1978 | * @irq: interrupt number |
| 1979 | * @_di: pointer to the ab8500_charger structure |
| 1980 | * |
| 1981 | * Returns IRQ status(IRQ_HANDLED) |
| 1982 | */ |
| 1983 | static irqreturn_t ab8500_charger_mainchunplugdet_handler(int irq, void *_di) |
| 1984 | { |
| 1985 | struct ab8500_charger *di = _di; |
| 1986 | |
| 1987 | dev_dbg(di->dev, "Main charger unplugged\n"); |
| 1988 | queue_work(di->charger_wq, &di->ac_work); |
| 1989 | |
| 1990 | return IRQ_HANDLED; |
| 1991 | } |
| 1992 | |
| 1993 | /** |
| 1994 | * ab8500_charger_mainchplugdet_handler() - main charger plugged |
| 1995 | * @irq: interrupt number |
| 1996 | * @_di: pointer to the ab8500_charger structure |
| 1997 | * |
| 1998 | * Returns IRQ status(IRQ_HANDLED) |
| 1999 | */ |
| 2000 | static irqreturn_t ab8500_charger_mainchplugdet_handler(int irq, void *_di) |
| 2001 | { |
| 2002 | struct ab8500_charger *di = _di; |
| 2003 | |
| 2004 | dev_dbg(di->dev, "Main charger plugged\n"); |
| 2005 | queue_work(di->charger_wq, &di->ac_work); |
| 2006 | |
| 2007 | return IRQ_HANDLED; |
| 2008 | } |
| 2009 | |
| 2010 | /** |
| 2011 | * ab8500_charger_mainextchnotok_handler() - main charger not ok |
| 2012 | * @irq: interrupt number |
| 2013 | * @_di: pointer to the ab8500_charger structure |
| 2014 | * |
| 2015 | * Returns IRQ status(IRQ_HANDLED) |
| 2016 | */ |
| 2017 | static irqreturn_t ab8500_charger_mainextchnotok_handler(int irq, void *_di) |
| 2018 | { |
| 2019 | struct ab8500_charger *di = _di; |
| 2020 | |
| 2021 | dev_dbg(di->dev, "Main charger not ok\n"); |
| 2022 | di->flags.mainextchnotok = true; |
| 2023 | ab8500_power_supply_changed(di, &di->ac_chg.psy); |
| 2024 | |
| 2025 | /* Schedule a new HW failure check */ |
| 2026 | queue_delayed_work(di->charger_wq, &di->check_hw_failure_work, 0); |
| 2027 | |
| 2028 | return IRQ_HANDLED; |
| 2029 | } |
| 2030 | |
| 2031 | /** |
| 2032 | * ab8500_charger_mainchthprotr_handler() - Die temp is above main charger |
| 2033 | * thermal protection threshold |
| 2034 | * @irq: interrupt number |
| 2035 | * @_di: pointer to the ab8500_charger structure |
| 2036 | * |
| 2037 | * Returns IRQ status(IRQ_HANDLED) |
| 2038 | */ |
| 2039 | static irqreturn_t ab8500_charger_mainchthprotr_handler(int irq, void *_di) |
| 2040 | { |
| 2041 | struct ab8500_charger *di = _di; |
| 2042 | |
| 2043 | dev_dbg(di->dev, |
| 2044 | "Die temp above Main charger thermal protection threshold\n"); |
| 2045 | queue_work(di->charger_wq, &di->check_main_thermal_prot_work); |
| 2046 | |
| 2047 | return IRQ_HANDLED; |
| 2048 | } |
| 2049 | |
| 2050 | /** |
| 2051 | * ab8500_charger_mainchthprotf_handler() - Die temp is below main charger |
| 2052 | * thermal protection threshold |
| 2053 | * @irq: interrupt number |
| 2054 | * @_di: pointer to the ab8500_charger structure |
| 2055 | * |
| 2056 | * Returns IRQ status(IRQ_HANDLED) |
| 2057 | */ |
| 2058 | static irqreturn_t ab8500_charger_mainchthprotf_handler(int irq, void *_di) |
| 2059 | { |
| 2060 | struct ab8500_charger *di = _di; |
| 2061 | |
| 2062 | dev_dbg(di->dev, |
| 2063 | "Die temp ok for Main charger thermal protection threshold\n"); |
| 2064 | queue_work(di->charger_wq, &di->check_main_thermal_prot_work); |
| 2065 | |
| 2066 | return IRQ_HANDLED; |
| 2067 | } |
| 2068 | |
| 2069 | /** |
| 2070 | * ab8500_charger_vbusdetf_handler() - VBUS falling detected |
| 2071 | * @irq: interrupt number |
| 2072 | * @_di: pointer to the ab8500_charger structure |
| 2073 | * |
| 2074 | * Returns IRQ status(IRQ_HANDLED) |
| 2075 | */ |
| 2076 | static irqreturn_t ab8500_charger_vbusdetf_handler(int irq, void *_di) |
| 2077 | { |
| 2078 | struct ab8500_charger *di = _di; |
| 2079 | |
| 2080 | dev_dbg(di->dev, "VBUS falling detected\n"); |
| 2081 | queue_work(di->charger_wq, &di->detect_usb_type_work); |
| 2082 | |
| 2083 | return IRQ_HANDLED; |
| 2084 | } |
| 2085 | |
| 2086 | /** |
| 2087 | * ab8500_charger_vbusdetr_handler() - VBUS rising detected |
| 2088 | * @irq: interrupt number |
| 2089 | * @_di: pointer to the ab8500_charger structure |
| 2090 | * |
| 2091 | * Returns IRQ status(IRQ_HANDLED) |
| 2092 | */ |
| 2093 | static irqreturn_t ab8500_charger_vbusdetr_handler(int irq, void *_di) |
| 2094 | { |
| 2095 | struct ab8500_charger *di = _di; |
| 2096 | |
| 2097 | di->vbus_detected = true; |
| 2098 | dev_dbg(di->dev, "VBUS rising detected\n"); |
| 2099 | queue_work(di->charger_wq, &di->detect_usb_type_work); |
| 2100 | |
| 2101 | return IRQ_HANDLED; |
| 2102 | } |
| 2103 | |
| 2104 | /** |
| 2105 | * ab8500_charger_usblinkstatus_handler() - USB link status has changed |
| 2106 | * @irq: interrupt number |
| 2107 | * @_di: pointer to the ab8500_charger structure |
| 2108 | * |
| 2109 | * Returns IRQ status(IRQ_HANDLED) |
| 2110 | */ |
| 2111 | static irqreturn_t ab8500_charger_usblinkstatus_handler(int irq, void *_di) |
| 2112 | { |
| 2113 | struct ab8500_charger *di = _di; |
| 2114 | |
| 2115 | dev_dbg(di->dev, "USB link status changed\n"); |
| 2116 | |
| 2117 | queue_work(di->charger_wq, &di->usb_link_status_work); |
| 2118 | |
| 2119 | return IRQ_HANDLED; |
| 2120 | } |
| 2121 | |
| 2122 | /** |
| 2123 | * ab8500_charger_usbchthprotr_handler() - Die temp is above usb charger |
| 2124 | * thermal protection threshold |
| 2125 | * @irq: interrupt number |
| 2126 | * @_di: pointer to the ab8500_charger structure |
| 2127 | * |
| 2128 | * Returns IRQ status(IRQ_HANDLED) |
| 2129 | */ |
| 2130 | static irqreturn_t ab8500_charger_usbchthprotr_handler(int irq, void *_di) |
| 2131 | { |
| 2132 | struct ab8500_charger *di = _di; |
| 2133 | |
| 2134 | dev_dbg(di->dev, |
| 2135 | "Die temp above USB charger thermal protection threshold\n"); |
| 2136 | queue_work(di->charger_wq, &di->check_usb_thermal_prot_work); |
| 2137 | |
| 2138 | return IRQ_HANDLED; |
| 2139 | } |
| 2140 | |
| 2141 | /** |
| 2142 | * ab8500_charger_usbchthprotf_handler() - Die temp is below usb charger |
| 2143 | * thermal protection threshold |
| 2144 | * @irq: interrupt number |
| 2145 | * @_di: pointer to the ab8500_charger structure |
| 2146 | * |
| 2147 | * Returns IRQ status(IRQ_HANDLED) |
| 2148 | */ |
| 2149 | static irqreturn_t ab8500_charger_usbchthprotf_handler(int irq, void *_di) |
| 2150 | { |
| 2151 | struct ab8500_charger *di = _di; |
| 2152 | |
| 2153 | dev_dbg(di->dev, |
| 2154 | "Die temp ok for USB charger thermal protection threshold\n"); |
| 2155 | queue_work(di->charger_wq, &di->check_usb_thermal_prot_work); |
| 2156 | |
| 2157 | return IRQ_HANDLED; |
| 2158 | } |
| 2159 | |
| 2160 | /** |
| 2161 | * ab8500_charger_usbchargernotokr_handler() - USB charger not ok detected |
| 2162 | * @irq: interrupt number |
| 2163 | * @_di: pointer to the ab8500_charger structure |
| 2164 | * |
| 2165 | * Returns IRQ status(IRQ_HANDLED) |
| 2166 | */ |
| 2167 | static irqreturn_t ab8500_charger_usbchargernotokr_handler(int irq, void *_di) |
| 2168 | { |
| 2169 | struct ab8500_charger *di = _di; |
| 2170 | |
| 2171 | dev_dbg(di->dev, "Not allowed USB charger detected\n"); |
| 2172 | queue_delayed_work(di->charger_wq, &di->check_usbchgnotok_work, 0); |
| 2173 | |
| 2174 | return IRQ_HANDLED; |
| 2175 | } |
| 2176 | |
| 2177 | /** |
| 2178 | * ab8500_charger_chwdexp_handler() - Charger watchdog expired |
| 2179 | * @irq: interrupt number |
| 2180 | * @_di: pointer to the ab8500_charger structure |
| 2181 | * |
| 2182 | * Returns IRQ status(IRQ_HANDLED) |
| 2183 | */ |
| 2184 | static irqreturn_t ab8500_charger_chwdexp_handler(int irq, void *_di) |
| 2185 | { |
| 2186 | struct ab8500_charger *di = _di; |
| 2187 | |
| 2188 | dev_dbg(di->dev, "Charger watchdog expired\n"); |
| 2189 | |
| 2190 | /* |
| 2191 | * The charger that was online when the watchdog expired |
| 2192 | * needs to be restarted for charging to start again |
| 2193 | */ |
| 2194 | if (di->ac.charger_online) { |
| 2195 | di->ac.wd_expired = true; |
| 2196 | ab8500_power_supply_changed(di, &di->ac_chg.psy); |
| 2197 | } |
| 2198 | if (di->usb.charger_online) { |
| 2199 | di->usb.wd_expired = true; |
| 2200 | ab8500_power_supply_changed(di, &di->usb_chg.psy); |
| 2201 | } |
| 2202 | |
| 2203 | return IRQ_HANDLED; |
| 2204 | } |
| 2205 | |
| 2206 | /** |
| 2207 | * ab8500_charger_vbusovv_handler() - VBUS overvoltage detected |
| 2208 | * @irq: interrupt number |
| 2209 | * @_di: pointer to the ab8500_charger structure |
| 2210 | * |
| 2211 | * Returns IRQ status(IRQ_HANDLED) |
| 2212 | */ |
| 2213 | static irqreturn_t ab8500_charger_vbusovv_handler(int irq, void *_di) |
| 2214 | { |
| 2215 | struct ab8500_charger *di = _di; |
| 2216 | |
| 2217 | dev_dbg(di->dev, "VBUS overvoltage detected\n"); |
| 2218 | di->flags.vbus_ovv = true; |
| 2219 | ab8500_power_supply_changed(di, &di->usb_chg.psy); |
| 2220 | |
| 2221 | /* Schedule a new HW failure check */ |
| 2222 | queue_delayed_work(di->charger_wq, &di->check_hw_failure_work, 0); |
| 2223 | |
| 2224 | return IRQ_HANDLED; |
| 2225 | } |
| 2226 | |
| 2227 | /** |
| 2228 | * ab8500_charger_ac_get_property() - get the ac/mains properties |
| 2229 | * @psy: pointer to the power_supply structure |
| 2230 | * @psp: pointer to the power_supply_property structure |
| 2231 | * @val: pointer to the power_supply_propval union |
| 2232 | * |
| 2233 | * This function gets called when an application tries to get the ac/mains |
| 2234 | * properties by reading the sysfs files. |
| 2235 | * AC/Mains properties are online, present and voltage. |
| 2236 | * online: ac/mains charging is in progress or not |
| 2237 | * present: presence of the ac/mains |
| 2238 | * voltage: AC/Mains voltage |
| 2239 | * Returns error code in case of failure else 0(on success) |
| 2240 | */ |
| 2241 | static int ab8500_charger_ac_get_property(struct power_supply *psy, |
| 2242 | enum power_supply_property psp, |
| 2243 | union power_supply_propval *val) |
| 2244 | { |
| 2245 | struct ab8500_charger *di; |
| 2246 | |
| 2247 | di = to_ab8500_charger_ac_device_info(psy_to_ux500_charger(psy)); |
| 2248 | |
| 2249 | switch (psp) { |
| 2250 | case POWER_SUPPLY_PROP_HEALTH: |
| 2251 | if (di->flags.mainextchnotok) |
| 2252 | val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE; |
| 2253 | else if (di->ac.wd_expired || di->usb.wd_expired) |
| 2254 | val->intval = POWER_SUPPLY_HEALTH_DEAD; |
| 2255 | else if (di->flags.main_thermal_prot) |
| 2256 | val->intval = POWER_SUPPLY_HEALTH_OVERHEAT; |
| 2257 | else |
| 2258 | val->intval = POWER_SUPPLY_HEALTH_GOOD; |
| 2259 | break; |
| 2260 | case POWER_SUPPLY_PROP_ONLINE: |
| 2261 | val->intval = di->ac.charger_online; |
| 2262 | break; |
| 2263 | case POWER_SUPPLY_PROP_PRESENT: |
| 2264 | val->intval = di->ac.charger_connected; |
| 2265 | break; |
| 2266 | case POWER_SUPPLY_PROP_VOLTAGE_NOW: |
| 2267 | di->ac.charger_voltage = ab8500_charger_get_ac_voltage(di); |
| 2268 | val->intval = di->ac.charger_voltage * 1000; |
| 2269 | break; |
| 2270 | case POWER_SUPPLY_PROP_VOLTAGE_AVG: |
| 2271 | /* |
| 2272 | * This property is used to indicate when CV mode is entered |
| 2273 | * for the AC charger |
| 2274 | */ |
| 2275 | di->ac.cv_active = ab8500_charger_ac_cv(di); |
| 2276 | val->intval = di->ac.cv_active; |
| 2277 | break; |
| 2278 | case POWER_SUPPLY_PROP_CURRENT_NOW: |
| 2279 | val->intval = ab8500_charger_get_ac_current(di) * 1000; |
| 2280 | break; |
| 2281 | default: |
| 2282 | return -EINVAL; |
| 2283 | } |
| 2284 | return 0; |
| 2285 | } |
| 2286 | |
| 2287 | /** |
| 2288 | * ab8500_charger_usb_get_property() - get the usb properties |
| 2289 | * @psy: pointer to the power_supply structure |
| 2290 | * @psp: pointer to the power_supply_property structure |
| 2291 | * @val: pointer to the power_supply_propval union |
| 2292 | * |
| 2293 | * This function gets called when an application tries to get the usb |
| 2294 | * properties by reading the sysfs files. |
| 2295 | * USB properties are online, present and voltage. |
| 2296 | * online: usb charging is in progress or not |
| 2297 | * present: presence of the usb |
| 2298 | * voltage: vbus voltage |
| 2299 | * Returns error code in case of failure else 0(on success) |
| 2300 | */ |
| 2301 | static int ab8500_charger_usb_get_property(struct power_supply *psy, |
| 2302 | enum power_supply_property psp, |
| 2303 | union power_supply_propval *val) |
| 2304 | { |
| 2305 | struct ab8500_charger *di; |
| 2306 | |
| 2307 | di = to_ab8500_charger_usb_device_info(psy_to_ux500_charger(psy)); |
| 2308 | |
| 2309 | switch (psp) { |
| 2310 | case POWER_SUPPLY_PROP_HEALTH: |
| 2311 | if (di->flags.usbchargernotok) |
| 2312 | val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE; |
| 2313 | else if (di->ac.wd_expired || di->usb.wd_expired) |
| 2314 | val->intval = POWER_SUPPLY_HEALTH_DEAD; |
| 2315 | else if (di->flags.usb_thermal_prot) |
| 2316 | val->intval = POWER_SUPPLY_HEALTH_OVERHEAT; |
| 2317 | else if (di->flags.vbus_ovv) |
| 2318 | val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE; |
| 2319 | else |
| 2320 | val->intval = POWER_SUPPLY_HEALTH_GOOD; |
| 2321 | break; |
| 2322 | case POWER_SUPPLY_PROP_ONLINE: |
| 2323 | val->intval = di->usb.charger_online; |
| 2324 | break; |
| 2325 | case POWER_SUPPLY_PROP_PRESENT: |
| 2326 | val->intval = di->usb.charger_connected; |
| 2327 | break; |
| 2328 | case POWER_SUPPLY_PROP_VOLTAGE_NOW: |
| 2329 | di->usb.charger_voltage = ab8500_charger_get_vbus_voltage(di); |
| 2330 | val->intval = di->usb.charger_voltage * 1000; |
| 2331 | break; |
| 2332 | case POWER_SUPPLY_PROP_VOLTAGE_AVG: |
| 2333 | /* |
| 2334 | * This property is used to indicate when CV mode is entered |
| 2335 | * for the USB charger |
| 2336 | */ |
| 2337 | di->usb.cv_active = ab8500_charger_usb_cv(di); |
| 2338 | val->intval = di->usb.cv_active; |
| 2339 | break; |
| 2340 | case POWER_SUPPLY_PROP_CURRENT_NOW: |
| 2341 | val->intval = ab8500_charger_get_usb_current(di) * 1000; |
| 2342 | break; |
| 2343 | case POWER_SUPPLY_PROP_CURRENT_AVG: |
| 2344 | /* |
| 2345 | * This property is used to indicate when VBUS has collapsed |
| 2346 | * due to too high output current from the USB charger |
| 2347 | */ |
| 2348 | if (di->flags.vbus_collapse) |
| 2349 | val->intval = 1; |
| 2350 | else |
| 2351 | val->intval = 0; |
| 2352 | break; |
| 2353 | default: |
| 2354 | return -EINVAL; |
| 2355 | } |
| 2356 | return 0; |
| 2357 | } |
| 2358 | |
| 2359 | /** |
| 2360 | * ab8500_charger_init_hw_registers() - Set up charger related registers |
| 2361 | * @di: pointer to the ab8500_charger structure |
| 2362 | * |
| 2363 | * Set up charger OVV, watchdog and maximum voltage registers as well as |
| 2364 | * charging of the backup battery |
| 2365 | */ |
| 2366 | static int ab8500_charger_init_hw_registers(struct ab8500_charger *di) |
| 2367 | { |
| 2368 | int ret = 0; |
| 2369 | |
| 2370 | /* Setup maximum charger current and voltage for ABB cut2.0 */ |
| 2371 | if (!is_ab8500_1p1_or_earlier(di->parent)) { |
| 2372 | ret = abx500_set_register_interruptible(di->dev, |
| 2373 | AB8500_CHARGER, |
| 2374 | AB8500_CH_VOLT_LVL_MAX_REG, CH_VOL_LVL_4P6); |
| 2375 | if (ret) { |
| 2376 | dev_err(di->dev, |
| 2377 | "failed to set CH_VOLT_LVL_MAX_REG\n"); |
| 2378 | goto out; |
| 2379 | } |
| 2380 | |
| 2381 | ret = abx500_set_register_interruptible(di->dev, |
| 2382 | AB8500_CHARGER, |
| 2383 | AB8500_CH_OPT_CRNTLVL_MAX_REG, CH_OP_CUR_LVL_1P6); |
| 2384 | if (ret) { |
| 2385 | dev_err(di->dev, |
| 2386 | "failed to set CH_OPT_CRNTLVL_MAX_REG\n"); |
| 2387 | goto out; |
| 2388 | } |
| 2389 | } |
| 2390 | |
| 2391 | /* VBUS OVV set to 6.3V and enable automatic current limitiation */ |
| 2392 | ret = abx500_set_register_interruptible(di->dev, |
| 2393 | AB8500_CHARGER, |
| 2394 | AB8500_USBCH_CTRL2_REG, |
| 2395 | VBUS_OVV_SELECT_6P3V | VBUS_AUTO_IN_CURR_LIM_ENA); |
| 2396 | if (ret) { |
| 2397 | dev_err(di->dev, "failed to set VBUS OVV\n"); |
| 2398 | goto out; |
| 2399 | } |
| 2400 | |
| 2401 | /* Enable main watchdog in OTP */ |
| 2402 | ret = abx500_set_register_interruptible(di->dev, |
| 2403 | AB8500_OTP_EMUL, AB8500_OTP_CONF_15, OTP_ENABLE_WD); |
| 2404 | if (ret) { |
| 2405 | dev_err(di->dev, "failed to enable main WD in OTP\n"); |
| 2406 | goto out; |
| 2407 | } |
| 2408 | |
| 2409 | /* Enable main watchdog */ |
| 2410 | ret = abx500_set_register_interruptible(di->dev, |
| 2411 | AB8500_SYS_CTRL2_BLOCK, |
| 2412 | AB8500_MAIN_WDOG_CTRL_REG, MAIN_WDOG_ENA); |
| 2413 | if (ret) { |
| 2414 | dev_err(di->dev, "faile to enable main watchdog\n"); |
| 2415 | goto out; |
| 2416 | } |
| 2417 | |
| 2418 | /* |
| 2419 | * Due to internal synchronisation, Enable and Kick watchdog bits |
| 2420 | * cannot be enabled in a single write. |
| 2421 | * A minimum delay of 2*32 kHz period (62.5µs) must be inserted |
| 2422 | * between writing Enable then Kick bits. |
| 2423 | */ |
| 2424 | udelay(63); |
| 2425 | |
| 2426 | /* Kick main watchdog */ |
| 2427 | ret = abx500_set_register_interruptible(di->dev, |
| 2428 | AB8500_SYS_CTRL2_BLOCK, |
| 2429 | AB8500_MAIN_WDOG_CTRL_REG, |
| 2430 | (MAIN_WDOG_ENA | MAIN_WDOG_KICK)); |
| 2431 | if (ret) { |
| 2432 | dev_err(di->dev, "failed to kick main watchdog\n"); |
| 2433 | goto out; |
| 2434 | } |
| 2435 | |
| 2436 | /* Disable main watchdog */ |
| 2437 | ret = abx500_set_register_interruptible(di->dev, |
| 2438 | AB8500_SYS_CTRL2_BLOCK, |
| 2439 | AB8500_MAIN_WDOG_CTRL_REG, MAIN_WDOG_DIS); |
| 2440 | if (ret) { |
| 2441 | dev_err(di->dev, "failed to disable main watchdog\n"); |
| 2442 | goto out; |
| 2443 | } |
| 2444 | |
| 2445 | /* Set watchdog timeout */ |
| 2446 | ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, |
| 2447 | AB8500_CH_WD_TIMER_REG, WD_TIMER); |
| 2448 | if (ret) { |
| 2449 | dev_err(di->dev, "failed to set charger watchdog timeout\n"); |
| 2450 | goto out; |
| 2451 | } |
| 2452 | |
| 2453 | /* Backup battery voltage and current */ |
| 2454 | ret = abx500_set_register_interruptible(di->dev, |
| 2455 | AB8500_RTC, |
| 2456 | AB8500_RTC_BACKUP_CHG_REG, |
Lee Jones | b0284de | 2012-11-30 10:09:42 +0000 | [diff] [blame] | 2457 | di->bm->bkup_bat_v | |
| 2458 | di->bm->bkup_bat_i); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 2459 | if (ret) { |
| 2460 | dev_err(di->dev, "failed to setup backup battery charging\n"); |
| 2461 | goto out; |
| 2462 | } |
| 2463 | |
| 2464 | /* Enable backup battery charging */ |
| 2465 | abx500_mask_and_set_register_interruptible(di->dev, |
| 2466 | AB8500_RTC, AB8500_RTC_CTRL_REG, |
| 2467 | RTC_BUP_CH_ENA, RTC_BUP_CH_ENA); |
| 2468 | if (ret < 0) |
| 2469 | dev_err(di->dev, "%s mask and set failed\n", __func__); |
| 2470 | |
| 2471 | out: |
| 2472 | return ret; |
| 2473 | } |
| 2474 | |
| 2475 | /* |
| 2476 | * ab8500 charger driver interrupts and their respective isr |
| 2477 | */ |
| 2478 | static struct ab8500_charger_interrupts ab8500_charger_irq[] = { |
| 2479 | {"MAIN_CH_UNPLUG_DET", ab8500_charger_mainchunplugdet_handler}, |
| 2480 | {"MAIN_CHARGE_PLUG_DET", ab8500_charger_mainchplugdet_handler}, |
| 2481 | {"MAIN_EXT_CH_NOT_OK", ab8500_charger_mainextchnotok_handler}, |
| 2482 | {"MAIN_CH_TH_PROT_R", ab8500_charger_mainchthprotr_handler}, |
| 2483 | {"MAIN_CH_TH_PROT_F", ab8500_charger_mainchthprotf_handler}, |
| 2484 | {"VBUS_DET_F", ab8500_charger_vbusdetf_handler}, |
| 2485 | {"VBUS_DET_R", ab8500_charger_vbusdetr_handler}, |
| 2486 | {"USB_LINK_STATUS", ab8500_charger_usblinkstatus_handler}, |
| 2487 | {"USB_CH_TH_PROT_R", ab8500_charger_usbchthprotr_handler}, |
| 2488 | {"USB_CH_TH_PROT_F", ab8500_charger_usbchthprotf_handler}, |
| 2489 | {"USB_CHARGER_NOT_OKR", ab8500_charger_usbchargernotokr_handler}, |
| 2490 | {"VBUS_OVV", ab8500_charger_vbusovv_handler}, |
| 2491 | {"CH_WD_EXP", ab8500_charger_chwdexp_handler}, |
| 2492 | }; |
| 2493 | |
| 2494 | static int ab8500_charger_usb_notifier_call(struct notifier_block *nb, |
| 2495 | unsigned long event, void *power) |
| 2496 | { |
| 2497 | struct ab8500_charger *di = |
| 2498 | container_of(nb, struct ab8500_charger, nb); |
| 2499 | enum ab8500_usb_state bm_usb_state; |
| 2500 | unsigned mA = *((unsigned *)power); |
| 2501 | |
| 2502 | if (event != USB_EVENT_VBUS) { |
| 2503 | dev_dbg(di->dev, "not a standard host, returning\n"); |
| 2504 | return NOTIFY_DONE; |
| 2505 | } |
| 2506 | |
| 2507 | /* TODO: State is fabricate here. See if charger really needs USB |
| 2508 | * state or if mA is enough |
| 2509 | */ |
| 2510 | if ((di->usb_state.usb_current == 2) && (mA > 2)) |
| 2511 | bm_usb_state = AB8500_BM_USB_STATE_RESUME; |
| 2512 | else if (mA == 0) |
| 2513 | bm_usb_state = AB8500_BM_USB_STATE_RESET_HS; |
| 2514 | else if (mA == 2) |
| 2515 | bm_usb_state = AB8500_BM_USB_STATE_SUSPEND; |
| 2516 | else if (mA >= 8) /* 8, 100, 500 */ |
| 2517 | bm_usb_state = AB8500_BM_USB_STATE_CONFIGURED; |
| 2518 | else /* Should never occur */ |
| 2519 | bm_usb_state = AB8500_BM_USB_STATE_RESET_FS; |
| 2520 | |
| 2521 | dev_dbg(di->dev, "%s usb_state: 0x%02x mA: %d\n", |
| 2522 | __func__, bm_usb_state, mA); |
| 2523 | |
| 2524 | spin_lock(&di->usb_state.usb_lock); |
| 2525 | di->usb_state.usb_changed = true; |
| 2526 | spin_unlock(&di->usb_state.usb_lock); |
| 2527 | |
| 2528 | di->usb_state.state = bm_usb_state; |
| 2529 | di->usb_state.usb_current = mA; |
| 2530 | |
| 2531 | queue_work(di->charger_wq, &di->usb_state_changed_work); |
| 2532 | |
| 2533 | return NOTIFY_OK; |
| 2534 | } |
| 2535 | |
| 2536 | #if defined(CONFIG_PM) |
| 2537 | static int ab8500_charger_resume(struct platform_device *pdev) |
| 2538 | { |
| 2539 | int ret; |
| 2540 | struct ab8500_charger *di = platform_get_drvdata(pdev); |
| 2541 | |
| 2542 | /* |
| 2543 | * For ABB revision 1.0 and 1.1 there is a bug in the watchdog |
| 2544 | * logic. That means we have to continously kick the charger |
| 2545 | * watchdog even when no charger is connected. This is only |
| 2546 | * valid once the AC charger has been enabled. This is |
| 2547 | * a bug that is not handled by the algorithm and the |
| 2548 | * watchdog have to be kicked by the charger driver |
| 2549 | * when the AC charger is disabled |
| 2550 | */ |
| 2551 | if (di->ac_conn && is_ab8500_1p1_or_earlier(di->parent)) { |
| 2552 | ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, |
| 2553 | AB8500_CHARG_WD_CTRL, CHARG_WD_KICK); |
| 2554 | if (ret) |
| 2555 | dev_err(di->dev, "Failed to kick WD!\n"); |
| 2556 | |
| 2557 | /* If not already pending start a new timer */ |
| 2558 | if (!delayed_work_pending( |
| 2559 | &di->kick_wd_work)) { |
| 2560 | queue_delayed_work(di->charger_wq, &di->kick_wd_work, |
| 2561 | round_jiffies(WD_KICK_INTERVAL)); |
| 2562 | } |
| 2563 | } |
| 2564 | |
| 2565 | /* If we still have a HW failure, schedule a new check */ |
| 2566 | if (di->flags.mainextchnotok || di->flags.vbus_ovv) { |
| 2567 | queue_delayed_work(di->charger_wq, |
| 2568 | &di->check_hw_failure_work, 0); |
| 2569 | } |
| 2570 | |
| 2571 | return 0; |
| 2572 | } |
| 2573 | |
| 2574 | static int ab8500_charger_suspend(struct platform_device *pdev, |
| 2575 | pm_message_t state) |
| 2576 | { |
| 2577 | struct ab8500_charger *di = platform_get_drvdata(pdev); |
| 2578 | |
| 2579 | /* Cancel any pending HW failure check */ |
| 2580 | if (delayed_work_pending(&di->check_hw_failure_work)) |
| 2581 | cancel_delayed_work(&di->check_hw_failure_work); |
| 2582 | |
| 2583 | return 0; |
| 2584 | } |
| 2585 | #else |
| 2586 | #define ab8500_charger_suspend NULL |
| 2587 | #define ab8500_charger_resume NULL |
| 2588 | #endif |
| 2589 | |
| 2590 | static int __devexit ab8500_charger_remove(struct platform_device *pdev) |
| 2591 | { |
| 2592 | struct ab8500_charger *di = platform_get_drvdata(pdev); |
| 2593 | int i, irq, ret; |
| 2594 | |
| 2595 | /* Disable AC charging */ |
| 2596 | ab8500_charger_ac_en(&di->ac_chg, false, 0, 0); |
| 2597 | |
| 2598 | /* Disable USB charging */ |
| 2599 | ab8500_charger_usb_en(&di->usb_chg, false, 0, 0); |
| 2600 | |
| 2601 | /* Disable interrupts */ |
| 2602 | for (i = 0; i < ARRAY_SIZE(ab8500_charger_irq); i++) { |
| 2603 | irq = platform_get_irq_byname(pdev, ab8500_charger_irq[i].name); |
| 2604 | free_irq(irq, di); |
| 2605 | } |
| 2606 | |
| 2607 | /* disable the regulator */ |
| 2608 | regulator_put(di->regu); |
| 2609 | |
| 2610 | /* Backup battery voltage and current disable */ |
| 2611 | ret = abx500_mask_and_set_register_interruptible(di->dev, |
| 2612 | AB8500_RTC, AB8500_RTC_CTRL_REG, RTC_BUP_CH_ENA, 0); |
| 2613 | if (ret < 0) |
| 2614 | dev_err(di->dev, "%s mask and set failed\n", __func__); |
| 2615 | |
Anton Vorontsov | efd71c8 | 2012-03-14 04:22:17 +0400 | [diff] [blame] | 2616 | usb_unregister_notifier(di->usb_phy, &di->nb); |
Kishon Vijay Abraham I | 721002e | 2012-06-22 17:02:45 +0530 | [diff] [blame] | 2617 | usb_put_phy(di->usb_phy); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 2618 | |
| 2619 | /* Delete the work queue */ |
| 2620 | destroy_workqueue(di->charger_wq); |
| 2621 | |
| 2622 | flush_scheduled_work(); |
| 2623 | power_supply_unregister(&di->usb_chg.psy); |
| 2624 | power_supply_unregister(&di->ac_chg.psy); |
| 2625 | platform_set_drvdata(pdev, NULL); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 2626 | |
| 2627 | return 0; |
| 2628 | } |
| 2629 | |
Rajanikanth H.V | 4aef72d | 2012-11-18 19:17:47 -0800 | [diff] [blame] | 2630 | static char *supply_interface[] = { |
| 2631 | "ab8500_chargalg", |
| 2632 | "ab8500_fg", |
| 2633 | "ab8500_btemp", |
| 2634 | }; |
| 2635 | |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 2636 | static int __devinit ab8500_charger_probe(struct platform_device *pdev) |
| 2637 | { |
Rajanikanth H.V | 4aef72d | 2012-11-18 19:17:47 -0800 | [diff] [blame] | 2638 | struct device_node *np = pdev->dev.of_node; |
Lee Jones | 7722b79 | 2012-11-30 10:56:28 +0000 | [diff] [blame^] | 2639 | struct abx500_bm_data *plat = pdev->dev.platform_data; |
Lee Jones | 2aac3de | 2012-05-05 04:38:19 -0700 | [diff] [blame] | 2640 | struct ab8500_charger *di; |
Rajanikanth H.V | e0f1abe | 2012-11-18 18:45:41 -0800 | [diff] [blame] | 2641 | int irq, i, charger_status, ret = 0; |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 2642 | |
Rajanikanth H.V | 4aef72d | 2012-11-18 19:17:47 -0800 | [diff] [blame] | 2643 | di = devm_kzalloc(&pdev->dev, sizeof(*di), GFP_KERNEL); |
| 2644 | if (!di) { |
| 2645 | dev_err(&pdev->dev, "%s no mem for ab8500_charger\n", __func__); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 2646 | return -ENOMEM; |
Rajanikanth H.V | 4aef72d | 2012-11-18 19:17:47 -0800 | [diff] [blame] | 2647 | } |
Lee Jones | 7722b79 | 2012-11-30 10:56:28 +0000 | [diff] [blame^] | 2648 | |
| 2649 | if (!plat) { |
| 2650 | dev_err(&pdev->dev, "no battery management data supplied\n"); |
| 2651 | return -EINVAL; |
Rajanikanth H.V | 4aef72d | 2012-11-18 19:17:47 -0800 | [diff] [blame] | 2652 | } |
Lee Jones | 7722b79 | 2012-11-30 10:56:28 +0000 | [diff] [blame^] | 2653 | di->bm = plat; |
| 2654 | |
| 2655 | if (np) { |
| 2656 | ret = ab8500_bm_of_probe(&pdev->dev, np, di->bm); |
| 2657 | if (ret) { |
| 2658 | dev_err(&pdev->dev, "failed to get battery information\n"); |
| 2659 | return ret; |
| 2660 | } |
| 2661 | di->autopower_cfg = of_property_read_bool(np, "autopower_cfg"); |
| 2662 | } else |
| 2663 | di->autopower_cfg = false; |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 2664 | |
| 2665 | /* get parent data */ |
| 2666 | di->dev = &pdev->dev; |
| 2667 | di->parent = dev_get_drvdata(pdev->dev.parent); |
| 2668 | di->gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); |
| 2669 | |
| 2670 | /* initialize lock */ |
| 2671 | spin_lock_init(&di->usb_state.usb_lock); |
| 2672 | |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 2673 | di->autopower = false; |
| 2674 | |
| 2675 | /* AC supply */ |
| 2676 | /* power_supply base class */ |
| 2677 | di->ac_chg.psy.name = "ab8500_ac"; |
| 2678 | di->ac_chg.psy.type = POWER_SUPPLY_TYPE_MAINS; |
| 2679 | di->ac_chg.psy.properties = ab8500_charger_ac_props; |
| 2680 | di->ac_chg.psy.num_properties = ARRAY_SIZE(ab8500_charger_ac_props); |
| 2681 | di->ac_chg.psy.get_property = ab8500_charger_ac_get_property; |
Rajanikanth H.V | 4aef72d | 2012-11-18 19:17:47 -0800 | [diff] [blame] | 2682 | di->ac_chg.psy.supplied_to = supply_interface; |
| 2683 | di->ac_chg.psy.num_supplicants = ARRAY_SIZE(supply_interface), |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 2684 | /* ux500_charger sub-class */ |
| 2685 | di->ac_chg.ops.enable = &ab8500_charger_ac_en; |
| 2686 | di->ac_chg.ops.kick_wd = &ab8500_charger_watchdog_kick; |
| 2687 | di->ac_chg.ops.update_curr = &ab8500_charger_update_charger_current; |
| 2688 | di->ac_chg.max_out_volt = ab8500_charger_voltage_map[ |
| 2689 | ARRAY_SIZE(ab8500_charger_voltage_map) - 1]; |
| 2690 | di->ac_chg.max_out_curr = ab8500_charger_current_map[ |
| 2691 | ARRAY_SIZE(ab8500_charger_current_map) - 1]; |
| 2692 | |
| 2693 | /* USB supply */ |
| 2694 | /* power_supply base class */ |
| 2695 | di->usb_chg.psy.name = "ab8500_usb"; |
| 2696 | di->usb_chg.psy.type = POWER_SUPPLY_TYPE_USB; |
| 2697 | di->usb_chg.psy.properties = ab8500_charger_usb_props; |
| 2698 | di->usb_chg.psy.num_properties = ARRAY_SIZE(ab8500_charger_usb_props); |
| 2699 | di->usb_chg.psy.get_property = ab8500_charger_usb_get_property; |
Rajanikanth H.V | 4aef72d | 2012-11-18 19:17:47 -0800 | [diff] [blame] | 2700 | di->usb_chg.psy.supplied_to = supply_interface; |
| 2701 | di->usb_chg.psy.num_supplicants = ARRAY_SIZE(supply_interface), |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 2702 | /* ux500_charger sub-class */ |
| 2703 | di->usb_chg.ops.enable = &ab8500_charger_usb_en; |
| 2704 | di->usb_chg.ops.kick_wd = &ab8500_charger_watchdog_kick; |
| 2705 | di->usb_chg.ops.update_curr = &ab8500_charger_update_charger_current; |
| 2706 | di->usb_chg.max_out_volt = ab8500_charger_voltage_map[ |
| 2707 | ARRAY_SIZE(ab8500_charger_voltage_map) - 1]; |
| 2708 | di->usb_chg.max_out_curr = ab8500_charger_current_map[ |
| 2709 | ARRAY_SIZE(ab8500_charger_current_map) - 1]; |
| 2710 | |
| 2711 | |
| 2712 | /* Create a work queue for the charger */ |
| 2713 | di->charger_wq = |
| 2714 | create_singlethread_workqueue("ab8500_charger_wq"); |
| 2715 | if (di->charger_wq == NULL) { |
| 2716 | dev_err(di->dev, "failed to create work queue\n"); |
Rajanikanth H.V | 4aef72d | 2012-11-18 19:17:47 -0800 | [diff] [blame] | 2717 | return -ENOMEM; |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 2718 | } |
| 2719 | |
| 2720 | /* Init work for HW failure check */ |
Tejun Heo | 203b42f | 2012-08-21 13:18:23 -0700 | [diff] [blame] | 2721 | INIT_DEFERRABLE_WORK(&di->check_hw_failure_work, |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 2722 | ab8500_charger_check_hw_failure_work); |
Tejun Heo | 203b42f | 2012-08-21 13:18:23 -0700 | [diff] [blame] | 2723 | INIT_DEFERRABLE_WORK(&di->check_usbchgnotok_work, |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 2724 | ab8500_charger_check_usbchargernotok_work); |
| 2725 | |
| 2726 | /* |
| 2727 | * For ABB revision 1.0 and 1.1 there is a bug in the watchdog |
| 2728 | * logic. That means we have to continously kick the charger |
| 2729 | * watchdog even when no charger is connected. This is only |
| 2730 | * valid once the AC charger has been enabled. This is |
| 2731 | * a bug that is not handled by the algorithm and the |
| 2732 | * watchdog have to be kicked by the charger driver |
| 2733 | * when the AC charger is disabled |
| 2734 | */ |
Tejun Heo | 203b42f | 2012-08-21 13:18:23 -0700 | [diff] [blame] | 2735 | INIT_DEFERRABLE_WORK(&di->kick_wd_work, |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 2736 | ab8500_charger_kick_watchdog_work); |
| 2737 | |
Tejun Heo | 203b42f | 2012-08-21 13:18:23 -0700 | [diff] [blame] | 2738 | INIT_DEFERRABLE_WORK(&di->check_vbat_work, |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 2739 | ab8500_charger_check_vbat_work); |
| 2740 | |
| 2741 | /* Init work for charger detection */ |
| 2742 | INIT_WORK(&di->usb_link_status_work, |
| 2743 | ab8500_charger_usb_link_status_work); |
| 2744 | INIT_WORK(&di->ac_work, ab8500_charger_ac_work); |
| 2745 | INIT_WORK(&di->detect_usb_type_work, |
| 2746 | ab8500_charger_detect_usb_type_work); |
| 2747 | |
| 2748 | INIT_WORK(&di->usb_state_changed_work, |
| 2749 | ab8500_charger_usb_state_changed_work); |
| 2750 | |
| 2751 | /* Init work for checking HW status */ |
| 2752 | INIT_WORK(&di->check_main_thermal_prot_work, |
| 2753 | ab8500_charger_check_main_thermal_prot_work); |
| 2754 | INIT_WORK(&di->check_usb_thermal_prot_work, |
| 2755 | ab8500_charger_check_usb_thermal_prot_work); |
| 2756 | |
| 2757 | /* |
| 2758 | * VDD ADC supply needs to be enabled from this driver when there |
| 2759 | * is a charger connected to avoid erroneous BTEMP_HIGH/LOW |
| 2760 | * interrupts during charging |
| 2761 | */ |
| 2762 | di->regu = regulator_get(di->dev, "vddadc"); |
| 2763 | if (IS_ERR(di->regu)) { |
| 2764 | ret = PTR_ERR(di->regu); |
| 2765 | dev_err(di->dev, "failed to get vddadc regulator\n"); |
| 2766 | goto free_charger_wq; |
| 2767 | } |
| 2768 | |
| 2769 | |
| 2770 | /* Initialize OVV, and other registers */ |
| 2771 | ret = ab8500_charger_init_hw_registers(di); |
| 2772 | if (ret) { |
| 2773 | dev_err(di->dev, "failed to initialize ABB registers\n"); |
| 2774 | goto free_regulator; |
| 2775 | } |
| 2776 | |
| 2777 | /* Register AC charger class */ |
| 2778 | ret = power_supply_register(di->dev, &di->ac_chg.psy); |
| 2779 | if (ret) { |
| 2780 | dev_err(di->dev, "failed to register AC charger\n"); |
| 2781 | goto free_regulator; |
| 2782 | } |
| 2783 | |
| 2784 | /* Register USB charger class */ |
| 2785 | ret = power_supply_register(di->dev, &di->usb_chg.psy); |
| 2786 | if (ret) { |
| 2787 | dev_err(di->dev, "failed to register USB charger\n"); |
| 2788 | goto free_ac; |
| 2789 | } |
| 2790 | |
Kishon Vijay Abraham I | 662dca5 | 2012-06-22 17:02:46 +0530 | [diff] [blame] | 2791 | di->usb_phy = usb_get_phy(USB_PHY_TYPE_USB2); |
Kishon Vijay Abraham I | ded017e | 2012-06-26 17:40:32 +0530 | [diff] [blame] | 2792 | if (IS_ERR_OR_NULL(di->usb_phy)) { |
Anton Vorontsov | efd71c8 | 2012-03-14 04:22:17 +0400 | [diff] [blame] | 2793 | dev_err(di->dev, "failed to get usb transceiver\n"); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 2794 | ret = -EINVAL; |
| 2795 | goto free_usb; |
| 2796 | } |
| 2797 | di->nb.notifier_call = ab8500_charger_usb_notifier_call; |
Anton Vorontsov | efd71c8 | 2012-03-14 04:22:17 +0400 | [diff] [blame] | 2798 | ret = usb_register_notifier(di->usb_phy, &di->nb); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 2799 | if (ret) { |
Anton Vorontsov | efd71c8 | 2012-03-14 04:22:17 +0400 | [diff] [blame] | 2800 | dev_err(di->dev, "failed to register usb notifier\n"); |
| 2801 | goto put_usb_phy; |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 2802 | } |
| 2803 | |
| 2804 | /* Identify the connected charger types during startup */ |
| 2805 | charger_status = ab8500_charger_detect_chargers(di); |
| 2806 | if (charger_status & AC_PW_CONN) { |
| 2807 | di->ac.charger_connected = 1; |
| 2808 | di->ac_conn = true; |
| 2809 | ab8500_power_supply_changed(di, &di->ac_chg.psy); |
| 2810 | sysfs_notify(&di->ac_chg.psy.dev->kobj, NULL, "present"); |
| 2811 | } |
| 2812 | |
| 2813 | if (charger_status & USB_PW_CONN) { |
| 2814 | dev_dbg(di->dev, "VBUS Detect during startup\n"); |
| 2815 | di->vbus_detected = true; |
| 2816 | di->vbus_detected_start = true; |
| 2817 | queue_work(di->charger_wq, |
| 2818 | &di->detect_usb_type_work); |
| 2819 | } |
| 2820 | |
| 2821 | /* Register interrupts */ |
| 2822 | for (i = 0; i < ARRAY_SIZE(ab8500_charger_irq); i++) { |
| 2823 | irq = platform_get_irq_byname(pdev, ab8500_charger_irq[i].name); |
| 2824 | ret = request_threaded_irq(irq, NULL, ab8500_charger_irq[i].isr, |
| 2825 | IRQF_SHARED | IRQF_NO_SUSPEND, |
| 2826 | ab8500_charger_irq[i].name, di); |
| 2827 | |
| 2828 | if (ret != 0) { |
| 2829 | dev_err(di->dev, "failed to request %s IRQ %d: %d\n" |
| 2830 | , ab8500_charger_irq[i].name, irq, ret); |
| 2831 | goto free_irq; |
| 2832 | } |
| 2833 | dev_dbg(di->dev, "Requested %s IRQ %d: %d\n", |
| 2834 | ab8500_charger_irq[i].name, irq, ret); |
| 2835 | } |
| 2836 | |
| 2837 | platform_set_drvdata(pdev, di); |
| 2838 | |
| 2839 | return ret; |
| 2840 | |
| 2841 | free_irq: |
Anton Vorontsov | efd71c8 | 2012-03-14 04:22:17 +0400 | [diff] [blame] | 2842 | usb_unregister_notifier(di->usb_phy, &di->nb); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 2843 | |
| 2844 | /* We also have to free all successfully registered irqs */ |
| 2845 | for (i = i - 1; i >= 0; i--) { |
| 2846 | irq = platform_get_irq_byname(pdev, ab8500_charger_irq[i].name); |
| 2847 | free_irq(irq, di); |
| 2848 | } |
Anton Vorontsov | efd71c8 | 2012-03-14 04:22:17 +0400 | [diff] [blame] | 2849 | put_usb_phy: |
Kishon Vijay Abraham I | 721002e | 2012-06-22 17:02:45 +0530 | [diff] [blame] | 2850 | usb_put_phy(di->usb_phy); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 2851 | free_usb: |
| 2852 | power_supply_unregister(&di->usb_chg.psy); |
| 2853 | free_ac: |
| 2854 | power_supply_unregister(&di->ac_chg.psy); |
| 2855 | free_regulator: |
| 2856 | regulator_put(di->regu); |
| 2857 | free_charger_wq: |
| 2858 | destroy_workqueue(di->charger_wq); |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 2859 | return ret; |
| 2860 | } |
| 2861 | |
Rajanikanth H.V | 4aef72d | 2012-11-18 19:17:47 -0800 | [diff] [blame] | 2862 | static const struct of_device_id ab8500_charger_match[] = { |
| 2863 | { .compatible = "stericsson,ab8500-charger", }, |
| 2864 | { }, |
| 2865 | }; |
| 2866 | |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 2867 | static struct platform_driver ab8500_charger_driver = { |
| 2868 | .probe = ab8500_charger_probe, |
| 2869 | .remove = __devexit_p(ab8500_charger_remove), |
| 2870 | .suspend = ab8500_charger_suspend, |
| 2871 | .resume = ab8500_charger_resume, |
| 2872 | .driver = { |
| 2873 | .name = "ab8500-charger", |
| 2874 | .owner = THIS_MODULE, |
Rajanikanth H.V | 4aef72d | 2012-11-18 19:17:47 -0800 | [diff] [blame] | 2875 | .of_match_table = ab8500_charger_match, |
Arun Murthy | 84edbee | 2012-02-29 21:54:26 +0530 | [diff] [blame] | 2876 | }, |
| 2877 | }; |
| 2878 | |
| 2879 | static int __init ab8500_charger_init(void) |
| 2880 | { |
| 2881 | return platform_driver_register(&ab8500_charger_driver); |
| 2882 | } |
| 2883 | |
| 2884 | static void __exit ab8500_charger_exit(void) |
| 2885 | { |
| 2886 | platform_driver_unregister(&ab8500_charger_driver); |
| 2887 | } |
| 2888 | |
| 2889 | subsys_initcall_sync(ab8500_charger_init); |
| 2890 | module_exit(ab8500_charger_exit); |
| 2891 | |
| 2892 | MODULE_LICENSE("GPL v2"); |
| 2893 | MODULE_AUTHOR("Johan Palsson, Karl Komierowski, Arun R Murthy"); |
| 2894 | MODULE_ALIAS("platform:ab8500-charger"); |
| 2895 | MODULE_DESCRIPTION("AB8500 charger management driver"); |