blob: 522e88e395ccac7358ed2cb2ac1b999244af55c2 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*****************************************************************************/
2
3/*
4 * stallion.c -- stallion multiport serial driver.
5 *
6 * Copyright (C) 1996-1999 Stallion Technologies
7 * Copyright (C) 1994-1996 Greg Ungerer.
8 *
9 * This code is loosely based on the Linux serial driver, written by
10 * Linus Torvalds, Theodore T'so and others.
11 *
12 * This program is free software; you can redistribute it and/or modify
13 * it under the terms of the GNU General Public License as published by
14 * the Free Software Foundation; either version 2 of the License, or
15 * (at your option) any later version.
16 *
17 * This program is distributed in the hope that it will be useful,
18 * but WITHOUT ANY WARRANTY; without even the implied warranty of
19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 * GNU General Public License for more details.
21 *
22 * You should have received a copy of the GNU General Public License
23 * along with this program; if not, write to the Free Software
24 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
25 */
26
27/*****************************************************************************/
28
Linus Torvalds1da177e2005-04-16 15:20:36 -070029#include <linux/module.h>
30#include <linux/slab.h>
31#include <linux/interrupt.h>
32#include <linux/tty.h>
33#include <linux/tty_flip.h>
34#include <linux/serial.h>
35#include <linux/cd1400.h>
36#include <linux/sc26198.h>
37#include <linux/comstats.h>
38#include <linux/stallion.h>
39#include <linux/ioport.h>
40#include <linux/init.h>
41#include <linux/smp_lock.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070042#include <linux/device.h>
43#include <linux/delay.h>
44
45#include <asm/io.h>
46#include <asm/uaccess.h>
47
48#ifdef CONFIG_PCI
49#include <linux/pci.h>
50#endif
51
52/*****************************************************************************/
53
54/*
55 * Define different board types. Use the standard Stallion "assigned"
56 * board numbers. Boards supported in this driver are abbreviated as
57 * EIO = EasyIO and ECH = EasyConnection 8/32.
58 */
59#define BRD_EASYIO 20
60#define BRD_ECH 21
61#define BRD_ECHMC 22
62#define BRD_ECHPCI 26
63#define BRD_ECH64PCI 27
64#define BRD_EASYIOPCI 28
65
66/*
67 * Define a configuration structure to hold the board configuration.
68 * Need to set this up in the code (for now) with the boards that are
69 * to be configured into the system. This is what needs to be modified
70 * when adding/removing/modifying boards. Each line entry in the
71 * stl_brdconf[] array is a board. Each line contains io/irq/memory
72 * ranges for that board (as well as what type of board it is).
73 * Some examples:
74 * { BRD_EASYIO, 0x2a0, 0, 0, 10, 0 },
75 * This line would configure an EasyIO board (4 or 8, no difference),
76 * at io address 2a0 and irq 10.
77 * Another example:
78 * { BRD_ECH, 0x2a8, 0x280, 0, 12, 0 },
79 * This line will configure an EasyConnection 8/32 board at primary io
80 * address 2a8, secondary io address 280 and irq 12.
81 * Enter as many lines into this array as you want (only the first 4
82 * will actually be used!). Any combination of EasyIO and EasyConnection
83 * boards can be specified. EasyConnection 8/32 boards can share their
84 * secondary io addresses between each other.
85 *
86 * NOTE: there is no need to put any entries in this table for PCI
87 * boards. They will be found automatically by the driver - provided
88 * PCI BIOS32 support is compiled into the kernel.
89 */
90
91typedef struct {
92 int brdtype;
93 int ioaddr1;
94 int ioaddr2;
95 unsigned long memaddr;
96 int irq;
97 int irqtype;
98} stlconf_t;
99
100static stlconf_t stl_brdconf[] = {
101 /*{ BRD_EASYIO, 0x2a0, 0, 0, 10, 0 },*/
102};
103
Tobias Klauserfe971072006-01-09 20:54:02 -0800104static int stl_nrbrds = ARRAY_SIZE(stl_brdconf);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700105
106/*****************************************************************************/
107
108/*
109 * Define some important driver characteristics. Device major numbers
110 * allocated as per Linux Device Registry.
111 */
112#ifndef STL_SIOMEMMAJOR
113#define STL_SIOMEMMAJOR 28
114#endif
115#ifndef STL_SERIALMAJOR
116#define STL_SERIALMAJOR 24
117#endif
118#ifndef STL_CALLOUTMAJOR
119#define STL_CALLOUTMAJOR 25
120#endif
121
122/*
123 * Set the TX buffer size. Bigger is better, but we don't want
124 * to chew too much memory with buffers!
125 */
126#define STL_TXBUFLOW 512
127#define STL_TXBUFSIZE 4096
128
129/*****************************************************************************/
130
131/*
132 * Define our local driver identity first. Set up stuff to deal with
133 * all the local structures required by a serial tty driver.
134 */
135static char *stl_drvtitle = "Stallion Multiport Serial Driver";
136static char *stl_drvname = "stallion";
137static char *stl_drvversion = "5.6.0";
138
139static struct tty_driver *stl_serial;
140
141/*
Linus Torvalds1da177e2005-04-16 15:20:36 -0700142 * Define a local default termios struct. All ports will be created
143 * with this termios initially. Basically all it defines is a raw port
144 * at 9600, 8 data bits, 1 stop bit.
145 */
146static struct termios stl_deftermios = {
147 .c_cflag = (B9600 | CS8 | CREAD | HUPCL | CLOCAL),
148 .c_cc = INIT_C_CC,
149};
150
151/*
152 * Define global stats structures. Not used often, and can be
153 * re-used for each stats call.
154 */
155static comstats_t stl_comstats;
156static combrd_t stl_brdstats;
157static stlbrd_t stl_dummybrd;
158static stlport_t stl_dummyport;
159
160/*
161 * Define global place to put buffer overflow characters.
162 */
163static char stl_unwanted[SC26198_RXFIFOSIZE];
164
165/*****************************************************************************/
166
167static stlbrd_t *stl_brds[STL_MAXBRDS];
168
169/*
170 * Per board state flags. Used with the state field of the board struct.
171 * Not really much here!
172 */
173#define BRD_FOUND 0x1
174
175/*
176 * Define the port structure istate flags. These set of flags are
177 * modified at interrupt time - so setting and reseting them needs
178 * to be atomic. Use the bit clear/setting routines for this.
179 */
180#define ASYI_TXBUSY 1
181#define ASYI_TXLOW 2
182#define ASYI_DCDCHANGE 3
183#define ASYI_TXFLOWED 4
184
185/*
186 * Define an array of board names as printable strings. Handy for
187 * referencing boards when printing trace and stuff.
188 */
189static char *stl_brdnames[] = {
190 (char *) NULL,
191 (char *) NULL,
192 (char *) NULL,
193 (char *) NULL,
194 (char *) NULL,
195 (char *) NULL,
196 (char *) NULL,
197 (char *) NULL,
198 (char *) NULL,
199 (char *) NULL,
200 (char *) NULL,
201 (char *) NULL,
202 (char *) NULL,
203 (char *) NULL,
204 (char *) NULL,
205 (char *) NULL,
206 (char *) NULL,
207 (char *) NULL,
208 (char *) NULL,
209 (char *) NULL,
210 "EasyIO",
211 "EC8/32-AT",
212 "EC8/32-MC",
213 (char *) NULL,
214 (char *) NULL,
215 (char *) NULL,
216 "EC8/32-PCI",
217 "EC8/64-PCI",
218 "EasyIO-PCI",
219};
220
221/*****************************************************************************/
222
223/*
224 * Define some string labels for arguments passed from the module
225 * load line. These allow for easy board definitions, and easy
226 * modification of the io, memory and irq resoucres.
227 */
228static int stl_nargs = 0;
229static char *board0[4];
230static char *board1[4];
231static char *board2[4];
232static char *board3[4];
233
234static char **stl_brdsp[] = {
235 (char **) &board0,
236 (char **) &board1,
237 (char **) &board2,
238 (char **) &board3
239};
240
241/*
242 * Define a set of common board names, and types. This is used to
243 * parse any module arguments.
244 */
245
246typedef struct stlbrdtype {
247 char *name;
248 int type;
249} stlbrdtype_t;
250
251static stlbrdtype_t stl_brdstr[] = {
252 { "easyio", BRD_EASYIO },
253 { "eio", BRD_EASYIO },
254 { "20", BRD_EASYIO },
255 { "ec8/32", BRD_ECH },
256 { "ec8/32-at", BRD_ECH },
257 { "ec8/32-isa", BRD_ECH },
258 { "ech", BRD_ECH },
259 { "echat", BRD_ECH },
260 { "21", BRD_ECH },
261 { "ec8/32-mc", BRD_ECHMC },
262 { "ec8/32-mca", BRD_ECHMC },
263 { "echmc", BRD_ECHMC },
264 { "echmca", BRD_ECHMC },
265 { "22", BRD_ECHMC },
266 { "ec8/32-pc", BRD_ECHPCI },
267 { "ec8/32-pci", BRD_ECHPCI },
268 { "26", BRD_ECHPCI },
269 { "ec8/64-pc", BRD_ECH64PCI },
270 { "ec8/64-pci", BRD_ECH64PCI },
271 { "ech-pci", BRD_ECH64PCI },
272 { "echpci", BRD_ECH64PCI },
273 { "echpc", BRD_ECH64PCI },
274 { "27", BRD_ECH64PCI },
275 { "easyio-pc", BRD_EASYIOPCI },
276 { "easyio-pci", BRD_EASYIOPCI },
277 { "eio-pci", BRD_EASYIOPCI },
278 { "eiopci", BRD_EASYIOPCI },
279 { "28", BRD_EASYIOPCI },
280};
281
282/*
283 * Define the module agruments.
284 */
285MODULE_AUTHOR("Greg Ungerer");
286MODULE_DESCRIPTION("Stallion Multiport Serial Driver");
287MODULE_LICENSE("GPL");
288
289module_param_array(board0, charp, &stl_nargs, 0);
290MODULE_PARM_DESC(board0, "Board 0 config -> name[,ioaddr[,ioaddr2][,irq]]");
291module_param_array(board1, charp, &stl_nargs, 0);
292MODULE_PARM_DESC(board1, "Board 1 config -> name[,ioaddr[,ioaddr2][,irq]]");
293module_param_array(board2, charp, &stl_nargs, 0);
294MODULE_PARM_DESC(board2, "Board 2 config -> name[,ioaddr[,ioaddr2][,irq]]");
295module_param_array(board3, charp, &stl_nargs, 0);
296MODULE_PARM_DESC(board3, "Board 3 config -> name[,ioaddr[,ioaddr2][,irq]]");
297
298/*****************************************************************************/
299
300/*
301 * Hardware ID bits for the EasyIO and ECH boards. These defines apply
302 * to the directly accessible io ports of these boards (not the uarts -
303 * they are in cd1400.h and sc26198.h).
304 */
305#define EIO_8PORTRS 0x04
306#define EIO_4PORTRS 0x05
307#define EIO_8PORTDI 0x00
308#define EIO_8PORTM 0x06
309#define EIO_MK3 0x03
310#define EIO_IDBITMASK 0x07
311
312#define EIO_BRDMASK 0xf0
313#define ID_BRD4 0x10
314#define ID_BRD8 0x20
315#define ID_BRD16 0x30
316
317#define EIO_INTRPEND 0x08
318#define EIO_INTEDGE 0x00
319#define EIO_INTLEVEL 0x08
320#define EIO_0WS 0x10
321
322#define ECH_ID 0xa0
323#define ECH_IDBITMASK 0xe0
324#define ECH_BRDENABLE 0x08
325#define ECH_BRDDISABLE 0x00
326#define ECH_INTENABLE 0x01
327#define ECH_INTDISABLE 0x00
328#define ECH_INTLEVEL 0x02
329#define ECH_INTEDGE 0x00
330#define ECH_INTRPEND 0x01
331#define ECH_BRDRESET 0x01
332
333#define ECHMC_INTENABLE 0x01
334#define ECHMC_BRDRESET 0x02
335
336#define ECH_PNLSTATUS 2
337#define ECH_PNL16PORT 0x20
338#define ECH_PNLIDMASK 0x07
339#define ECH_PNLXPID 0x40
340#define ECH_PNLINTRPEND 0x80
341
342#define ECH_ADDR2MASK 0x1e0
343
344/*
345 * Define the vector mapping bits for the programmable interrupt board
346 * hardware. These bits encode the interrupt for the board to use - it
347 * is software selectable (except the EIO-8M).
348 */
349static unsigned char stl_vecmap[] = {
350 0xff, 0xff, 0xff, 0x04, 0x06, 0x05, 0xff, 0x07,
351 0xff, 0xff, 0x00, 0x02, 0x01, 0xff, 0xff, 0x03
352};
353
354/*
Alan Coxb65b5b52006-06-27 02:54:05 -0700355 * Lock ordering is that you may not take stallion_lock holding
356 * brd_lock.
357 */
358
359static spinlock_t brd_lock; /* Guard the board mapping */
360static spinlock_t stallion_lock; /* Guard the tty driver */
361
362/*
Linus Torvalds1da177e2005-04-16 15:20:36 -0700363 * Set up enable and disable macros for the ECH boards. They require
364 * the secondary io address space to be activated and deactivated.
365 * This way all ECH boards can share their secondary io region.
366 * If this is an ECH-PCI board then also need to set the page pointer
367 * to point to the correct page.
368 */
369#define BRDENABLE(brdnr,pagenr) \
370 if (stl_brds[(brdnr)]->brdtype == BRD_ECH) \
371 outb((stl_brds[(brdnr)]->ioctrlval | ECH_BRDENABLE), \
372 stl_brds[(brdnr)]->ioctrl); \
373 else if (stl_brds[(brdnr)]->brdtype == BRD_ECHPCI) \
374 outb((pagenr), stl_brds[(brdnr)]->ioctrl);
375
376#define BRDDISABLE(brdnr) \
377 if (stl_brds[(brdnr)]->brdtype == BRD_ECH) \
378 outb((stl_brds[(brdnr)]->ioctrlval | ECH_BRDDISABLE), \
379 stl_brds[(brdnr)]->ioctrl);
380
381#define STL_CD1400MAXBAUD 230400
382#define STL_SC26198MAXBAUD 460800
383
384#define STL_BAUDBASE 115200
385#define STL_CLOSEDELAY (5 * HZ / 10)
386
387/*****************************************************************************/
388
389#ifdef CONFIG_PCI
390
391/*
392 * Define the Stallion PCI vendor and device IDs.
393 */
394#ifndef PCI_VENDOR_ID_STALLION
395#define PCI_VENDOR_ID_STALLION 0x124d
396#endif
397#ifndef PCI_DEVICE_ID_ECHPCI832
398#define PCI_DEVICE_ID_ECHPCI832 0x0000
399#endif
400#ifndef PCI_DEVICE_ID_ECHPCI864
401#define PCI_DEVICE_ID_ECHPCI864 0x0002
402#endif
403#ifndef PCI_DEVICE_ID_EIOPCI
404#define PCI_DEVICE_ID_EIOPCI 0x0003
405#endif
406
407/*
408 * Define structure to hold all Stallion PCI boards.
409 */
410typedef struct stlpcibrd {
411 unsigned short vendid;
412 unsigned short devid;
413 int brdtype;
414} stlpcibrd_t;
415
416static stlpcibrd_t stl_pcibrds[] = {
417 { PCI_VENDOR_ID_STALLION, PCI_DEVICE_ID_ECHPCI864, BRD_ECH64PCI },
418 { PCI_VENDOR_ID_STALLION, PCI_DEVICE_ID_EIOPCI, BRD_EASYIOPCI },
419 { PCI_VENDOR_ID_STALLION, PCI_DEVICE_ID_ECHPCI832, BRD_ECHPCI },
420 { PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87410, BRD_ECHPCI },
421};
422
Tobias Klauserfe971072006-01-09 20:54:02 -0800423static int stl_nrpcibrds = ARRAY_SIZE(stl_pcibrds);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700424
425#endif
426
427/*****************************************************************************/
428
429/*
430 * Define macros to extract a brd/port number from a minor number.
431 */
432#define MINOR2BRD(min) (((min) & 0xc0) >> 6)
433#define MINOR2PORT(min) ((min) & 0x3f)
434
435/*
436 * Define a baud rate table that converts termios baud rate selector
437 * into the actual baud rate value. All baud rate calculations are
438 * based on the actual baud rate required.
439 */
440static unsigned int stl_baudrates[] = {
441 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800,
442 9600, 19200, 38400, 57600, 115200, 230400, 460800, 921600
443};
444
445/*
446 * Define some handy local macros...
447 */
448#undef MIN
449#define MIN(a,b) (((a) <= (b)) ? (a) : (b))
450
451#undef TOLOWER
452#define TOLOWER(x) ((((x) >= 'A') && ((x) <= 'Z')) ? ((x) + 0x20) : (x))
453
454/*****************************************************************************/
455
456/*
457 * Declare all those functions in this driver!
458 */
459
460static void stl_argbrds(void);
461static int stl_parsebrd(stlconf_t *confp, char **argp);
462
463static unsigned long stl_atol(char *str);
464
Adrian Bunk408b6642005-05-01 08:59:29 -0700465static int stl_init(void);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700466static int stl_open(struct tty_struct *tty, struct file *filp);
467static void stl_close(struct tty_struct *tty, struct file *filp);
468static int stl_write(struct tty_struct *tty, const unsigned char *buf, int count);
469static void stl_putchar(struct tty_struct *tty, unsigned char ch);
470static void stl_flushchars(struct tty_struct *tty);
471static int stl_writeroom(struct tty_struct *tty);
472static int stl_charsinbuffer(struct tty_struct *tty);
473static int stl_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg);
474static void stl_settermios(struct tty_struct *tty, struct termios *old);
475static void stl_throttle(struct tty_struct *tty);
476static void stl_unthrottle(struct tty_struct *tty);
477static void stl_stop(struct tty_struct *tty);
478static void stl_start(struct tty_struct *tty);
479static void stl_flushbuffer(struct tty_struct *tty);
480static void stl_breakctl(struct tty_struct *tty, int state);
481static void stl_waituntilsent(struct tty_struct *tty, int timeout);
482static void stl_sendxchar(struct tty_struct *tty, char ch);
483static void stl_hangup(struct tty_struct *tty);
484static int stl_memioctl(struct inode *ip, struct file *fp, unsigned int cmd, unsigned long arg);
485static int stl_portinfo(stlport_t *portp, int portnr, char *pos);
486static int stl_readproc(char *page, char **start, off_t off, int count, int *eof, void *data);
487
488static int stl_brdinit(stlbrd_t *brdp);
489static int stl_initports(stlbrd_t *brdp, stlpanel_t *panelp);
490static int stl_getserial(stlport_t *portp, struct serial_struct __user *sp);
491static int stl_setserial(stlport_t *portp, struct serial_struct __user *sp);
492static int stl_getbrdstats(combrd_t __user *bp);
493static int stl_getportstats(stlport_t *portp, comstats_t __user *cp);
494static int stl_clrportstats(stlport_t *portp, comstats_t __user *cp);
495static int stl_getportstruct(stlport_t __user *arg);
496static int stl_getbrdstruct(stlbrd_t __user *arg);
497static int stl_waitcarrier(stlport_t *portp, struct file *filp);
498static int stl_eiointr(stlbrd_t *brdp);
499static int stl_echatintr(stlbrd_t *brdp);
500static int stl_echmcaintr(stlbrd_t *brdp);
501static int stl_echpciintr(stlbrd_t *brdp);
502static int stl_echpci64intr(stlbrd_t *brdp);
503static void stl_offintr(void *private);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700504static stlbrd_t *stl_allocbrd(void);
505static stlport_t *stl_getport(int brdnr, int panelnr, int portnr);
506
507static inline int stl_initbrds(void);
508static inline int stl_initeio(stlbrd_t *brdp);
509static inline int stl_initech(stlbrd_t *brdp);
510static inline int stl_getbrdnr(void);
511
512#ifdef CONFIG_PCI
513static inline int stl_findpcibrds(void);
514static inline int stl_initpcibrd(int brdtype, struct pci_dev *devp);
515#endif
516
517/*
518 * CD1400 uart specific handling functions.
519 */
520static void stl_cd1400setreg(stlport_t *portp, int regnr, int value);
521static int stl_cd1400getreg(stlport_t *portp, int regnr);
522static int stl_cd1400updatereg(stlport_t *portp, int regnr, int value);
523static int stl_cd1400panelinit(stlbrd_t *brdp, stlpanel_t *panelp);
524static void stl_cd1400portinit(stlbrd_t *brdp, stlpanel_t *panelp, stlport_t *portp);
525static void stl_cd1400setport(stlport_t *portp, struct termios *tiosp);
526static int stl_cd1400getsignals(stlport_t *portp);
527static void stl_cd1400setsignals(stlport_t *portp, int dtr, int rts);
528static void stl_cd1400ccrwait(stlport_t *portp);
529static void stl_cd1400enablerxtx(stlport_t *portp, int rx, int tx);
530static void stl_cd1400startrxtx(stlport_t *portp, int rx, int tx);
531static void stl_cd1400disableintrs(stlport_t *portp);
532static void stl_cd1400sendbreak(stlport_t *portp, int len);
533static void stl_cd1400flowctrl(stlport_t *portp, int state);
534static void stl_cd1400sendflow(stlport_t *portp, int state);
535static void stl_cd1400flush(stlport_t *portp);
536static int stl_cd1400datastate(stlport_t *portp);
537static void stl_cd1400eiointr(stlpanel_t *panelp, unsigned int iobase);
538static void stl_cd1400echintr(stlpanel_t *panelp, unsigned int iobase);
539static void stl_cd1400txisr(stlpanel_t *panelp, int ioaddr);
540static void stl_cd1400rxisr(stlpanel_t *panelp, int ioaddr);
541static void stl_cd1400mdmisr(stlpanel_t *panelp, int ioaddr);
542
543static inline int stl_cd1400breakisr(stlport_t *portp, int ioaddr);
544
545/*
546 * SC26198 uart specific handling functions.
547 */
548static void stl_sc26198setreg(stlport_t *portp, int regnr, int value);
549static int stl_sc26198getreg(stlport_t *portp, int regnr);
550static int stl_sc26198updatereg(stlport_t *portp, int regnr, int value);
551static int stl_sc26198getglobreg(stlport_t *portp, int regnr);
552static int stl_sc26198panelinit(stlbrd_t *brdp, stlpanel_t *panelp);
553static void stl_sc26198portinit(stlbrd_t *brdp, stlpanel_t *panelp, stlport_t *portp);
554static void stl_sc26198setport(stlport_t *portp, struct termios *tiosp);
555static int stl_sc26198getsignals(stlport_t *portp);
556static void stl_sc26198setsignals(stlport_t *portp, int dtr, int rts);
557static void stl_sc26198enablerxtx(stlport_t *portp, int rx, int tx);
558static void stl_sc26198startrxtx(stlport_t *portp, int rx, int tx);
559static void stl_sc26198disableintrs(stlport_t *portp);
560static void stl_sc26198sendbreak(stlport_t *portp, int len);
561static void stl_sc26198flowctrl(stlport_t *portp, int state);
562static void stl_sc26198sendflow(stlport_t *portp, int state);
563static void stl_sc26198flush(stlport_t *portp);
564static int stl_sc26198datastate(stlport_t *portp);
565static void stl_sc26198wait(stlport_t *portp);
566static void stl_sc26198txunflow(stlport_t *portp, struct tty_struct *tty);
567static void stl_sc26198intr(stlpanel_t *panelp, unsigned int iobase);
568static void stl_sc26198txisr(stlport_t *port);
569static void stl_sc26198rxisr(stlport_t *port, unsigned int iack);
570static void stl_sc26198rxbadch(stlport_t *portp, unsigned char status, char ch);
571static void stl_sc26198rxbadchars(stlport_t *portp);
572static void stl_sc26198otherisr(stlport_t *port, unsigned int iack);
573
574/*****************************************************************************/
575
576/*
577 * Generic UART support structure.
578 */
579typedef struct uart {
580 int (*panelinit)(stlbrd_t *brdp, stlpanel_t *panelp);
581 void (*portinit)(stlbrd_t *brdp, stlpanel_t *panelp, stlport_t *portp);
582 void (*setport)(stlport_t *portp, struct termios *tiosp);
583 int (*getsignals)(stlport_t *portp);
584 void (*setsignals)(stlport_t *portp, int dtr, int rts);
585 void (*enablerxtx)(stlport_t *portp, int rx, int tx);
586 void (*startrxtx)(stlport_t *portp, int rx, int tx);
587 void (*disableintrs)(stlport_t *portp);
588 void (*sendbreak)(stlport_t *portp, int len);
589 void (*flowctrl)(stlport_t *portp, int state);
590 void (*sendflow)(stlport_t *portp, int state);
591 void (*flush)(stlport_t *portp);
592 int (*datastate)(stlport_t *portp);
593 void (*intr)(stlpanel_t *panelp, unsigned int iobase);
594} uart_t;
595
596/*
597 * Define some macros to make calling these functions nice and clean.
598 */
599#define stl_panelinit (* ((uart_t *) panelp->uartp)->panelinit)
600#define stl_portinit (* ((uart_t *) portp->uartp)->portinit)
601#define stl_setport (* ((uart_t *) portp->uartp)->setport)
602#define stl_getsignals (* ((uart_t *) portp->uartp)->getsignals)
603#define stl_setsignals (* ((uart_t *) portp->uartp)->setsignals)
604#define stl_enablerxtx (* ((uart_t *) portp->uartp)->enablerxtx)
605#define stl_startrxtx (* ((uart_t *) portp->uartp)->startrxtx)
606#define stl_disableintrs (* ((uart_t *) portp->uartp)->disableintrs)
607#define stl_sendbreak (* ((uart_t *) portp->uartp)->sendbreak)
608#define stl_flowctrl (* ((uart_t *) portp->uartp)->flowctrl)
609#define stl_sendflow (* ((uart_t *) portp->uartp)->sendflow)
610#define stl_flush (* ((uart_t *) portp->uartp)->flush)
611#define stl_datastate (* ((uart_t *) portp->uartp)->datastate)
612
613/*****************************************************************************/
614
615/*
616 * CD1400 UART specific data initialization.
617 */
618static uart_t stl_cd1400uart = {
619 stl_cd1400panelinit,
620 stl_cd1400portinit,
621 stl_cd1400setport,
622 stl_cd1400getsignals,
623 stl_cd1400setsignals,
624 stl_cd1400enablerxtx,
625 stl_cd1400startrxtx,
626 stl_cd1400disableintrs,
627 stl_cd1400sendbreak,
628 stl_cd1400flowctrl,
629 stl_cd1400sendflow,
630 stl_cd1400flush,
631 stl_cd1400datastate,
632 stl_cd1400eiointr
633};
634
635/*
636 * Define the offsets within the register bank of a cd1400 based panel.
637 * These io address offsets are common to the EasyIO board as well.
638 */
639#define EREG_ADDR 0
640#define EREG_DATA 4
641#define EREG_RXACK 5
642#define EREG_TXACK 6
643#define EREG_MDACK 7
644
645#define EREG_BANKSIZE 8
646
647#define CD1400_CLK 25000000
648#define CD1400_CLK8M 20000000
649
650/*
651 * Define the cd1400 baud rate clocks. These are used when calculating
652 * what clock and divisor to use for the required baud rate. Also
653 * define the maximum baud rate allowed, and the default base baud.
654 */
655static int stl_cd1400clkdivs[] = {
656 CD1400_CLK0, CD1400_CLK1, CD1400_CLK2, CD1400_CLK3, CD1400_CLK4
657};
658
659/*****************************************************************************/
660
661/*
662 * SC26198 UART specific data initization.
663 */
664static uart_t stl_sc26198uart = {
665 stl_sc26198panelinit,
666 stl_sc26198portinit,
667 stl_sc26198setport,
668 stl_sc26198getsignals,
669 stl_sc26198setsignals,
670 stl_sc26198enablerxtx,
671 stl_sc26198startrxtx,
672 stl_sc26198disableintrs,
673 stl_sc26198sendbreak,
674 stl_sc26198flowctrl,
675 stl_sc26198sendflow,
676 stl_sc26198flush,
677 stl_sc26198datastate,
678 stl_sc26198intr
679};
680
681/*
682 * Define the offsets within the register bank of a sc26198 based panel.
683 */
684#define XP_DATA 0
685#define XP_ADDR 1
686#define XP_MODID 2
687#define XP_STATUS 2
688#define XP_IACK 3
689
690#define XP_BANKSIZE 4
691
692/*
693 * Define the sc26198 baud rate table. Offsets within the table
694 * represent the actual baud rate selector of sc26198 registers.
695 */
696static unsigned int sc26198_baudtable[] = {
697 50, 75, 150, 200, 300, 450, 600, 900, 1200, 1800, 2400, 3600,
698 4800, 7200, 9600, 14400, 19200, 28800, 38400, 57600, 115200,
699 230400, 460800, 921600
700};
701
Tobias Klauserfe971072006-01-09 20:54:02 -0800702#define SC26198_NRBAUDS ARRAY_SIZE(sc26198_baudtable)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700703
704/*****************************************************************************/
705
706/*
707 * Define the driver info for a user level control device. Used mainly
708 * to get at port stats - only not using the port device itself.
709 */
Arjan van de Ven62322d22006-07-03 00:24:21 -0700710static const struct file_operations stl_fsiomem = {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700711 .owner = THIS_MODULE,
712 .ioctl = stl_memioctl,
713};
714
715/*****************************************************************************/
716
gregkh@suse.deca8eca62005-03-23 09:53:09 -0800717static struct class *stallion_class;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700718
719/*
720 * Loadable module initialization stuff.
721 */
722
723static int __init stallion_module_init(void)
724{
Linus Torvalds1da177e2005-04-16 15:20:36 -0700725 stl_init();
Jesper Juhl014c2542006-01-15 02:37:08 +0100726 return 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700727}
728
729/*****************************************************************************/
730
731static void __exit stallion_module_exit(void)
732{
733 stlbrd_t *brdp;
734 stlpanel_t *panelp;
735 stlport_t *portp;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700736 int i, j, k;
737
738#ifdef DEBUG
739 printk("cleanup_module()\n");
740#endif
741
742 printk(KERN_INFO "Unloading %s: version %s\n", stl_drvtitle,
743 stl_drvversion);
744
Linus Torvalds1da177e2005-04-16 15:20:36 -0700745/*
746 * Free up all allocated resources used by the ports. This includes
747 * memory and interrupts. As part of this process we will also do
748 * a hangup on every open port - to try to flush out any processes
749 * hanging onto ports.
750 */
751 i = tty_unregister_driver(stl_serial);
752 put_tty_driver(stl_serial);
753 if (i) {
754 printk("STALLION: failed to un-register tty driver, "
755 "errno=%d\n", -i);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700756 return;
757 }
Greg Kroah-Hartman8ab5e4c2005-06-20 21:15:16 -0700758 for (i = 0; i < 4; i++)
gregkh@suse.deca8eca62005-03-23 09:53:09 -0800759 class_device_destroy(stallion_class, MKDEV(STL_SIOMEMMAJOR, i));
Linus Torvalds1da177e2005-04-16 15:20:36 -0700760 if ((i = unregister_chrdev(STL_SIOMEMMAJOR, "staliomem")))
761 printk("STALLION: failed to un-register serial memory device, "
762 "errno=%d\n", -i);
gregkh@suse.deca8eca62005-03-23 09:53:09 -0800763 class_destroy(stallion_class);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700764
Linus Torvalds1da177e2005-04-16 15:20:36 -0700765 for (i = 0; (i < stl_nrbrds); i++) {
766 if ((brdp = stl_brds[i]) == (stlbrd_t *) NULL)
767 continue;
768
769 free_irq(brdp->irq, brdp);
770
771 for (j = 0; (j < STL_MAXPANELS); j++) {
772 panelp = brdp->panels[j];
773 if (panelp == (stlpanel_t *) NULL)
774 continue;
775 for (k = 0; (k < STL_PORTSPERPANEL); k++) {
776 portp = panelp->ports[k];
777 if (portp == (stlport_t *) NULL)
778 continue;
779 if (portp->tty != (struct tty_struct *) NULL)
780 stl_hangup(portp->tty);
Jesper Juhl735d5662005-11-07 01:01:29 -0800781 kfree(portp->tx.buf);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700782 kfree(portp);
783 }
784 kfree(panelp);
785 }
786
787 release_region(brdp->ioaddr1, brdp->iosize1);
788 if (brdp->iosize2 > 0)
789 release_region(brdp->ioaddr2, brdp->iosize2);
790
791 kfree(brdp);
792 stl_brds[i] = (stlbrd_t *) NULL;
793 }
Linus Torvalds1da177e2005-04-16 15:20:36 -0700794}
795
796module_init(stallion_module_init);
797module_exit(stallion_module_exit);
798
799/*****************************************************************************/
800
801/*
802 * Check for any arguments passed in on the module load command line.
803 */
804
805static void stl_argbrds(void)
806{
807 stlconf_t conf;
808 stlbrd_t *brdp;
809 int i;
810
811#ifdef DEBUG
812 printk("stl_argbrds()\n");
813#endif
814
815 for (i = stl_nrbrds; (i < stl_nargs); i++) {
816 memset(&conf, 0, sizeof(conf));
817 if (stl_parsebrd(&conf, stl_brdsp[i]) == 0)
818 continue;
819 if ((brdp = stl_allocbrd()) == (stlbrd_t *) NULL)
820 continue;
821 stl_nrbrds = i + 1;
822 brdp->brdnr = i;
823 brdp->brdtype = conf.brdtype;
824 brdp->ioaddr1 = conf.ioaddr1;
825 brdp->ioaddr2 = conf.ioaddr2;
826 brdp->irq = conf.irq;
827 brdp->irqtype = conf.irqtype;
828 stl_brdinit(brdp);
829 }
830}
831
832/*****************************************************************************/
833
834/*
835 * Convert an ascii string number into an unsigned long.
836 */
837
838static unsigned long stl_atol(char *str)
839{
840 unsigned long val;
841 int base, c;
842 char *sp;
843
844 val = 0;
845 sp = str;
846 if ((*sp == '0') && (*(sp+1) == 'x')) {
847 base = 16;
848 sp += 2;
849 } else if (*sp == '0') {
850 base = 8;
851 sp++;
852 } else {
853 base = 10;
854 }
855
856 for (; (*sp != 0); sp++) {
857 c = (*sp > '9') ? (TOLOWER(*sp) - 'a' + 10) : (*sp - '0');
858 if ((c < 0) || (c >= base)) {
859 printk("STALLION: invalid argument %s\n", str);
860 val = 0;
861 break;
862 }
863 val = (val * base) + c;
864 }
Jesper Juhl014c2542006-01-15 02:37:08 +0100865 return val;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700866}
867
868/*****************************************************************************/
869
870/*
871 * Parse the supplied argument string, into the board conf struct.
872 */
873
874static int stl_parsebrd(stlconf_t *confp, char **argp)
875{
876 char *sp;
Tobias Klauserfe971072006-01-09 20:54:02 -0800877 int i;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700878
879#ifdef DEBUG
880 printk("stl_parsebrd(confp=%x,argp=%x)\n", (int) confp, (int) argp);
881#endif
882
883 if ((argp[0] == (char *) NULL) || (*argp[0] == 0))
Jesper Juhl014c2542006-01-15 02:37:08 +0100884 return 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700885
886 for (sp = argp[0], i = 0; ((*sp != 0) && (i < 25)); sp++, i++)
887 *sp = TOLOWER(*sp);
888
Tobias Klauserfe971072006-01-09 20:54:02 -0800889 for (i = 0; i < ARRAY_SIZE(stl_brdstr); i++) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700890 if (strcmp(stl_brdstr[i].name, argp[0]) == 0)
891 break;
892 }
Tobias Klauserfe971072006-01-09 20:54:02 -0800893 if (i == ARRAY_SIZE(stl_brdstr)) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700894 printk("STALLION: unknown board name, %s?\n", argp[0]);
Tobias Klauserfe971072006-01-09 20:54:02 -0800895 return 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700896 }
897
898 confp->brdtype = stl_brdstr[i].type;
899
900 i = 1;
901 if ((argp[i] != (char *) NULL) && (*argp[i] != 0))
902 confp->ioaddr1 = stl_atol(argp[i]);
903 i++;
904 if (confp->brdtype == BRD_ECH) {
905 if ((argp[i] != (char *) NULL) && (*argp[i] != 0))
906 confp->ioaddr2 = stl_atol(argp[i]);
907 i++;
908 }
909 if ((argp[i] != (char *) NULL) && (*argp[i] != 0))
910 confp->irq = stl_atol(argp[i]);
Jesper Juhl014c2542006-01-15 02:37:08 +0100911 return 1;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700912}
913
914/*****************************************************************************/
915
916/*
Linus Torvalds1da177e2005-04-16 15:20:36 -0700917 * Allocate a new board structure. Fill out the basic info in it.
918 */
919
920static stlbrd_t *stl_allocbrd(void)
921{
922 stlbrd_t *brdp;
923
Tobias Klauserb0b4ed72006-03-31 02:30:56 -0800924 brdp = kzalloc(sizeof(stlbrd_t), GFP_KERNEL);
925 if (!brdp) {
Alan Coxb65b5b52006-06-27 02:54:05 -0700926 printk("STALLION: failed to allocate memory (size=%Zd)\n",
Linus Torvalds1da177e2005-04-16 15:20:36 -0700927 sizeof(stlbrd_t));
Tobias Klauserb0b4ed72006-03-31 02:30:56 -0800928 return NULL;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700929 }
930
Linus Torvalds1da177e2005-04-16 15:20:36 -0700931 brdp->magic = STL_BOARDMAGIC;
Jesper Juhl014c2542006-01-15 02:37:08 +0100932 return brdp;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700933}
934
935/*****************************************************************************/
936
937static int stl_open(struct tty_struct *tty, struct file *filp)
938{
939 stlport_t *portp;
940 stlbrd_t *brdp;
941 unsigned int minordev;
942 int brdnr, panelnr, portnr, rc;
943
944#ifdef DEBUG
945 printk("stl_open(tty=%x,filp=%x): device=%s\n", (int) tty,
946 (int) filp, tty->name);
947#endif
948
949 minordev = tty->index;
950 brdnr = MINOR2BRD(minordev);
951 if (brdnr >= stl_nrbrds)
Jesper Juhl014c2542006-01-15 02:37:08 +0100952 return -ENODEV;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700953 brdp = stl_brds[brdnr];
954 if (brdp == (stlbrd_t *) NULL)
Jesper Juhl014c2542006-01-15 02:37:08 +0100955 return -ENODEV;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700956 minordev = MINOR2PORT(minordev);
957 for (portnr = -1, panelnr = 0; (panelnr < STL_MAXPANELS); panelnr++) {
958 if (brdp->panels[panelnr] == (stlpanel_t *) NULL)
959 break;
960 if (minordev < brdp->panels[panelnr]->nrports) {
961 portnr = minordev;
962 break;
963 }
964 minordev -= brdp->panels[panelnr]->nrports;
965 }
966 if (portnr < 0)
Jesper Juhl014c2542006-01-15 02:37:08 +0100967 return -ENODEV;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700968
969 portp = brdp->panels[panelnr]->ports[portnr];
970 if (portp == (stlport_t *) NULL)
Jesper Juhl014c2542006-01-15 02:37:08 +0100971 return -ENODEV;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700972
973/*
974 * On the first open of the device setup the port hardware, and
975 * initialize the per port data structure.
976 */
977 portp->tty = tty;
978 tty->driver_data = portp;
979 portp->refcount++;
980
981 if ((portp->flags & ASYNC_INITIALIZED) == 0) {
Tobias Klauserb0b4ed72006-03-31 02:30:56 -0800982 if (!portp->tx.buf) {
983 portp->tx.buf = kmalloc(STL_TXBUFSIZE, GFP_KERNEL);
984 if (!portp->tx.buf)
Jesper Juhl014c2542006-01-15 02:37:08 +0100985 return -ENOMEM;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700986 portp->tx.head = portp->tx.buf;
987 portp->tx.tail = portp->tx.buf;
988 }
989 stl_setport(portp, tty->termios);
990 portp->sigs = stl_getsignals(portp);
991 stl_setsignals(portp, 1, 1);
992 stl_enablerxtx(portp, 1, 1);
993 stl_startrxtx(portp, 1, 0);
994 clear_bit(TTY_IO_ERROR, &tty->flags);
995 portp->flags |= ASYNC_INITIALIZED;
996 }
997
998/*
999 * Check if this port is in the middle of closing. If so then wait
1000 * until it is closed then return error status, based on flag settings.
1001 * The sleep here does not need interrupt protection since the wakeup
1002 * for it is done with the same context.
1003 */
1004 if (portp->flags & ASYNC_CLOSING) {
1005 interruptible_sleep_on(&portp->close_wait);
1006 if (portp->flags & ASYNC_HUP_NOTIFY)
Jesper Juhl014c2542006-01-15 02:37:08 +01001007 return -EAGAIN;
1008 return -ERESTARTSYS;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001009 }
1010
1011/*
1012 * Based on type of open being done check if it can overlap with any
1013 * previous opens still in effect. If we are a normal serial device
1014 * then also we might have to wait for carrier.
1015 */
1016 if (!(filp->f_flags & O_NONBLOCK)) {
1017 if ((rc = stl_waitcarrier(portp, filp)) != 0)
Jesper Juhl014c2542006-01-15 02:37:08 +01001018 return rc;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001019 }
1020 portp->flags |= ASYNC_NORMAL_ACTIVE;
1021
Jesper Juhl014c2542006-01-15 02:37:08 +01001022 return 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001023}
1024
1025/*****************************************************************************/
1026
1027/*
1028 * Possibly need to wait for carrier (DCD signal) to come high. Say
1029 * maybe because if we are clocal then we don't need to wait...
1030 */
1031
1032static int stl_waitcarrier(stlport_t *portp, struct file *filp)
1033{
1034 unsigned long flags;
1035 int rc, doclocal;
1036
1037#ifdef DEBUG
1038 printk("stl_waitcarrier(portp=%x,filp=%x)\n", (int) portp, (int) filp);
1039#endif
1040
1041 rc = 0;
1042 doclocal = 0;
1043
Alan Coxb65b5b52006-06-27 02:54:05 -07001044 spin_lock_irqsave(&stallion_lock, flags);
1045
Linus Torvalds1da177e2005-04-16 15:20:36 -07001046 if (portp->tty->termios->c_cflag & CLOCAL)
1047 doclocal++;
1048
Linus Torvalds1da177e2005-04-16 15:20:36 -07001049 portp->openwaitcnt++;
1050 if (! tty_hung_up_p(filp))
1051 portp->refcount--;
1052
1053 for (;;) {
Alan Coxb65b5b52006-06-27 02:54:05 -07001054 /* Takes brd_lock internally */
Linus Torvalds1da177e2005-04-16 15:20:36 -07001055 stl_setsignals(portp, 1, 1);
1056 if (tty_hung_up_p(filp) ||
1057 ((portp->flags & ASYNC_INITIALIZED) == 0)) {
1058 if (portp->flags & ASYNC_HUP_NOTIFY)
1059 rc = -EBUSY;
1060 else
1061 rc = -ERESTARTSYS;
1062 break;
1063 }
1064 if (((portp->flags & ASYNC_CLOSING) == 0) &&
1065 (doclocal || (portp->sigs & TIOCM_CD))) {
1066 break;
1067 }
1068 if (signal_pending(current)) {
1069 rc = -ERESTARTSYS;
1070 break;
1071 }
Alan Coxb65b5b52006-06-27 02:54:05 -07001072 /* FIXME */
Linus Torvalds1da177e2005-04-16 15:20:36 -07001073 interruptible_sleep_on(&portp->open_wait);
1074 }
1075
1076 if (! tty_hung_up_p(filp))
1077 portp->refcount++;
1078 portp->openwaitcnt--;
Alan Coxb65b5b52006-06-27 02:54:05 -07001079 spin_unlock_irqrestore(&stallion_lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001080
Jesper Juhl014c2542006-01-15 02:37:08 +01001081 return rc;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001082}
1083
1084/*****************************************************************************/
1085
1086static void stl_close(struct tty_struct *tty, struct file *filp)
1087{
1088 stlport_t *portp;
1089 unsigned long flags;
1090
1091#ifdef DEBUG
1092 printk("stl_close(tty=%x,filp=%x)\n", (int) tty, (int) filp);
1093#endif
1094
1095 portp = tty->driver_data;
1096 if (portp == (stlport_t *) NULL)
1097 return;
1098
Alan Coxb65b5b52006-06-27 02:54:05 -07001099 spin_lock_irqsave(&stallion_lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001100 if (tty_hung_up_p(filp)) {
Alan Coxb65b5b52006-06-27 02:54:05 -07001101 spin_unlock_irqrestore(&stallion_lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001102 return;
1103 }
1104 if ((tty->count == 1) && (portp->refcount != 1))
1105 portp->refcount = 1;
1106 if (portp->refcount-- > 1) {
Alan Coxb65b5b52006-06-27 02:54:05 -07001107 spin_unlock_irqrestore(&stallion_lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001108 return;
1109 }
1110
1111 portp->refcount = 0;
1112 portp->flags |= ASYNC_CLOSING;
1113
1114/*
1115 * May want to wait for any data to drain before closing. The BUSY
1116 * flag keeps track of whether we are still sending or not - it is
1117 * very accurate for the cd1400, not quite so for the sc26198.
1118 * (The sc26198 has no "end-of-data" interrupt only empty FIFO)
1119 */
1120 tty->closing = 1;
Alan Coxb65b5b52006-06-27 02:54:05 -07001121
1122 spin_unlock_irqrestore(&stallion_lock, flags);
1123
Linus Torvalds1da177e2005-04-16 15:20:36 -07001124 if (portp->closing_wait != ASYNC_CLOSING_WAIT_NONE)
1125 tty_wait_until_sent(tty, portp->closing_wait);
1126 stl_waituntilsent(tty, (HZ / 2));
1127
Alan Coxb65b5b52006-06-27 02:54:05 -07001128
1129 spin_lock_irqsave(&stallion_lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001130 portp->flags &= ~ASYNC_INITIALIZED;
Alan Coxb65b5b52006-06-27 02:54:05 -07001131 spin_unlock_irqrestore(&stallion_lock, flags);
1132
Linus Torvalds1da177e2005-04-16 15:20:36 -07001133 stl_disableintrs(portp);
1134 if (tty->termios->c_cflag & HUPCL)
1135 stl_setsignals(portp, 0, 0);
1136 stl_enablerxtx(portp, 0, 0);
1137 stl_flushbuffer(tty);
1138 portp->istate = 0;
1139 if (portp->tx.buf != (char *) NULL) {
1140 kfree(portp->tx.buf);
1141 portp->tx.buf = (char *) NULL;
1142 portp->tx.head = (char *) NULL;
1143 portp->tx.tail = (char *) NULL;
1144 }
1145 set_bit(TTY_IO_ERROR, &tty->flags);
1146 tty_ldisc_flush(tty);
1147
1148 tty->closing = 0;
1149 portp->tty = (struct tty_struct *) NULL;
1150
1151 if (portp->openwaitcnt) {
1152 if (portp->close_delay)
1153 msleep_interruptible(jiffies_to_msecs(portp->close_delay));
1154 wake_up_interruptible(&portp->open_wait);
1155 }
1156
1157 portp->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
1158 wake_up_interruptible(&portp->close_wait);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001159}
1160
1161/*****************************************************************************/
1162
1163/*
1164 * Write routine. Take data and stuff it in to the TX ring queue.
1165 * If transmit interrupts are not running then start them.
1166 */
1167
1168static int stl_write(struct tty_struct *tty, const unsigned char *buf, int count)
1169{
1170 stlport_t *portp;
1171 unsigned int len, stlen;
1172 unsigned char *chbuf;
1173 char *head, *tail;
1174
1175#ifdef DEBUG
1176 printk("stl_write(tty=%x,buf=%x,count=%d)\n",
1177 (int) tty, (int) buf, count);
1178#endif
1179
Linus Torvalds1da177e2005-04-16 15:20:36 -07001180 portp = tty->driver_data;
1181 if (portp == (stlport_t *) NULL)
Jesper Juhl014c2542006-01-15 02:37:08 +01001182 return 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001183 if (portp->tx.buf == (char *) NULL)
Jesper Juhl014c2542006-01-15 02:37:08 +01001184 return 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001185
1186/*
1187 * If copying direct from user space we must cater for page faults,
1188 * causing us to "sleep" here for a while. To handle this copy in all
1189 * the data we need now, into a local buffer. Then when we got it all
1190 * copy it into the TX buffer.
1191 */
1192 chbuf = (unsigned char *) buf;
1193
1194 head = portp->tx.head;
1195 tail = portp->tx.tail;
1196 if (head >= tail) {
1197 len = STL_TXBUFSIZE - (head - tail) - 1;
1198 stlen = STL_TXBUFSIZE - (head - portp->tx.buf);
1199 } else {
1200 len = tail - head - 1;
1201 stlen = len;
1202 }
1203
1204 len = MIN(len, count);
1205 count = 0;
1206 while (len > 0) {
1207 stlen = MIN(len, stlen);
1208 memcpy(head, chbuf, stlen);
1209 len -= stlen;
1210 chbuf += stlen;
1211 count += stlen;
1212 head += stlen;
1213 if (head >= (portp->tx.buf + STL_TXBUFSIZE)) {
1214 head = portp->tx.buf;
1215 stlen = tail - head;
1216 }
1217 }
1218 portp->tx.head = head;
1219
1220 clear_bit(ASYI_TXLOW, &portp->istate);
1221 stl_startrxtx(portp, -1, 1);
1222
Jesper Juhl014c2542006-01-15 02:37:08 +01001223 return count;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001224}
1225
1226/*****************************************************************************/
1227
1228static void stl_putchar(struct tty_struct *tty, unsigned char ch)
1229{
1230 stlport_t *portp;
1231 unsigned int len;
1232 char *head, *tail;
1233
1234#ifdef DEBUG
1235 printk("stl_putchar(tty=%x,ch=%x)\n", (int) tty, (int) ch);
1236#endif
1237
1238 if (tty == (struct tty_struct *) NULL)
1239 return;
1240 portp = tty->driver_data;
1241 if (portp == (stlport_t *) NULL)
1242 return;
1243 if (portp->tx.buf == (char *) NULL)
1244 return;
1245
1246 head = portp->tx.head;
1247 tail = portp->tx.tail;
1248
1249 len = (head >= tail) ? (STL_TXBUFSIZE - (head - tail)) : (tail - head);
1250 len--;
1251
1252 if (len > 0) {
1253 *head++ = ch;
1254 if (head >= (portp->tx.buf + STL_TXBUFSIZE))
1255 head = portp->tx.buf;
1256 }
1257 portp->tx.head = head;
1258}
1259
1260/*****************************************************************************/
1261
1262/*
1263 * If there are any characters in the buffer then make sure that TX
1264 * interrupts are on and get'em out. Normally used after the putchar
1265 * routine has been called.
1266 */
1267
1268static void stl_flushchars(struct tty_struct *tty)
1269{
1270 stlport_t *portp;
1271
1272#ifdef DEBUG
1273 printk("stl_flushchars(tty=%x)\n", (int) tty);
1274#endif
1275
1276 if (tty == (struct tty_struct *) NULL)
1277 return;
1278 portp = tty->driver_data;
1279 if (portp == (stlport_t *) NULL)
1280 return;
1281 if (portp->tx.buf == (char *) NULL)
1282 return;
1283
Linus Torvalds1da177e2005-04-16 15:20:36 -07001284 stl_startrxtx(portp, -1, 1);
1285}
1286
1287/*****************************************************************************/
1288
1289static int stl_writeroom(struct tty_struct *tty)
1290{
1291 stlport_t *portp;
1292 char *head, *tail;
1293
1294#ifdef DEBUG
1295 printk("stl_writeroom(tty=%x)\n", (int) tty);
1296#endif
1297
1298 if (tty == (struct tty_struct *) NULL)
Jesper Juhl014c2542006-01-15 02:37:08 +01001299 return 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001300 portp = tty->driver_data;
1301 if (portp == (stlport_t *) NULL)
Jesper Juhl014c2542006-01-15 02:37:08 +01001302 return 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001303 if (portp->tx.buf == (char *) NULL)
Jesper Juhl014c2542006-01-15 02:37:08 +01001304 return 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001305
1306 head = portp->tx.head;
1307 tail = portp->tx.tail;
Jesper Juhl014c2542006-01-15 02:37:08 +01001308 return ((head >= tail) ? (STL_TXBUFSIZE - (head - tail) - 1) : (tail - head - 1));
Linus Torvalds1da177e2005-04-16 15:20:36 -07001309}
1310
1311/*****************************************************************************/
1312
1313/*
1314 * Return number of chars in the TX buffer. Normally we would just
1315 * calculate the number of chars in the buffer and return that, but if
1316 * the buffer is empty and TX interrupts are still on then we return
1317 * that the buffer still has 1 char in it. This way whoever called us
1318 * will not think that ALL chars have drained - since the UART still
1319 * must have some chars in it (we are busy after all).
1320 */
1321
1322static int stl_charsinbuffer(struct tty_struct *tty)
1323{
1324 stlport_t *portp;
1325 unsigned int size;
1326 char *head, *tail;
1327
1328#ifdef DEBUG
1329 printk("stl_charsinbuffer(tty=%x)\n", (int) tty);
1330#endif
1331
1332 if (tty == (struct tty_struct *) NULL)
Jesper Juhl014c2542006-01-15 02:37:08 +01001333 return 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001334 portp = tty->driver_data;
1335 if (portp == (stlport_t *) NULL)
Jesper Juhl014c2542006-01-15 02:37:08 +01001336 return 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001337 if (portp->tx.buf == (char *) NULL)
Jesper Juhl014c2542006-01-15 02:37:08 +01001338 return 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001339
1340 head = portp->tx.head;
1341 tail = portp->tx.tail;
1342 size = (head >= tail) ? (head - tail) : (STL_TXBUFSIZE - (tail - head));
1343 if ((size == 0) && test_bit(ASYI_TXBUSY, &portp->istate))
1344 size = 1;
Jesper Juhl014c2542006-01-15 02:37:08 +01001345 return size;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001346}
1347
1348/*****************************************************************************/
1349
1350/*
1351 * Generate the serial struct info.
1352 */
1353
1354static int stl_getserial(stlport_t *portp, struct serial_struct __user *sp)
1355{
1356 struct serial_struct sio;
1357 stlbrd_t *brdp;
1358
1359#ifdef DEBUG
1360 printk("stl_getserial(portp=%x,sp=%x)\n", (int) portp, (int) sp);
1361#endif
1362
1363 memset(&sio, 0, sizeof(struct serial_struct));
1364 sio.line = portp->portnr;
1365 sio.port = portp->ioaddr;
1366 sio.flags = portp->flags;
1367 sio.baud_base = portp->baud_base;
1368 sio.close_delay = portp->close_delay;
1369 sio.closing_wait = portp->closing_wait;
1370 sio.custom_divisor = portp->custom_divisor;
1371 sio.hub6 = 0;
1372 if (portp->uartp == &stl_cd1400uart) {
1373 sio.type = PORT_CIRRUS;
1374 sio.xmit_fifo_size = CD1400_TXFIFOSIZE;
1375 } else {
1376 sio.type = PORT_UNKNOWN;
1377 sio.xmit_fifo_size = SC26198_TXFIFOSIZE;
1378 }
1379
1380 brdp = stl_brds[portp->brdnr];
1381 if (brdp != (stlbrd_t *) NULL)
1382 sio.irq = brdp->irq;
1383
1384 return copy_to_user(sp, &sio, sizeof(struct serial_struct)) ? -EFAULT : 0;
1385}
1386
1387/*****************************************************************************/
1388
1389/*
1390 * Set port according to the serial struct info.
1391 * At this point we do not do any auto-configure stuff, so we will
1392 * just quietly ignore any requests to change irq, etc.
1393 */
1394
1395static int stl_setserial(stlport_t *portp, struct serial_struct __user *sp)
1396{
1397 struct serial_struct sio;
1398
1399#ifdef DEBUG
1400 printk("stl_setserial(portp=%x,sp=%x)\n", (int) portp, (int) sp);
1401#endif
1402
1403 if (copy_from_user(&sio, sp, sizeof(struct serial_struct)))
1404 return -EFAULT;
1405 if (!capable(CAP_SYS_ADMIN)) {
1406 if ((sio.baud_base != portp->baud_base) ||
1407 (sio.close_delay != portp->close_delay) ||
1408 ((sio.flags & ~ASYNC_USR_MASK) !=
1409 (portp->flags & ~ASYNC_USR_MASK)))
Jesper Juhl014c2542006-01-15 02:37:08 +01001410 return -EPERM;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001411 }
1412
1413 portp->flags = (portp->flags & ~ASYNC_USR_MASK) |
1414 (sio.flags & ASYNC_USR_MASK);
1415 portp->baud_base = sio.baud_base;
1416 portp->close_delay = sio.close_delay;
1417 portp->closing_wait = sio.closing_wait;
1418 portp->custom_divisor = sio.custom_divisor;
1419 stl_setport(portp, portp->tty->termios);
Jesper Juhl014c2542006-01-15 02:37:08 +01001420 return 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001421}
1422
1423/*****************************************************************************/
1424
1425static int stl_tiocmget(struct tty_struct *tty, struct file *file)
1426{
1427 stlport_t *portp;
1428
1429 if (tty == (struct tty_struct *) NULL)
Jesper Juhl014c2542006-01-15 02:37:08 +01001430 return -ENODEV;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001431 portp = tty->driver_data;
1432 if (portp == (stlport_t *) NULL)
Jesper Juhl014c2542006-01-15 02:37:08 +01001433 return -ENODEV;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001434 if (tty->flags & (1 << TTY_IO_ERROR))
Jesper Juhl014c2542006-01-15 02:37:08 +01001435 return -EIO;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001436
1437 return stl_getsignals(portp);
1438}
1439
1440static int stl_tiocmset(struct tty_struct *tty, struct file *file,
1441 unsigned int set, unsigned int clear)
1442{
1443 stlport_t *portp;
1444 int rts = -1, dtr = -1;
1445
1446 if (tty == (struct tty_struct *) NULL)
Jesper Juhl014c2542006-01-15 02:37:08 +01001447 return -ENODEV;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001448 portp = tty->driver_data;
1449 if (portp == (stlport_t *) NULL)
Jesper Juhl014c2542006-01-15 02:37:08 +01001450 return -ENODEV;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001451 if (tty->flags & (1 << TTY_IO_ERROR))
Jesper Juhl014c2542006-01-15 02:37:08 +01001452 return -EIO;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001453
1454 if (set & TIOCM_RTS)
1455 rts = 1;
1456 if (set & TIOCM_DTR)
1457 dtr = 1;
1458 if (clear & TIOCM_RTS)
1459 rts = 0;
1460 if (clear & TIOCM_DTR)
1461 dtr = 0;
1462
1463 stl_setsignals(portp, dtr, rts);
1464 return 0;
1465}
1466
1467static int stl_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg)
1468{
1469 stlport_t *portp;
1470 unsigned int ival;
1471 int rc;
1472 void __user *argp = (void __user *)arg;
1473
1474#ifdef DEBUG
1475 printk("stl_ioctl(tty=%x,file=%x,cmd=%x,arg=%x)\n",
1476 (int) tty, (int) file, cmd, (int) arg);
1477#endif
1478
1479 if (tty == (struct tty_struct *) NULL)
Jesper Juhl014c2542006-01-15 02:37:08 +01001480 return -ENODEV;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001481 portp = tty->driver_data;
1482 if (portp == (stlport_t *) NULL)
Jesper Juhl014c2542006-01-15 02:37:08 +01001483 return -ENODEV;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001484
1485 if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
1486 (cmd != COM_GETPORTSTATS) && (cmd != COM_CLRPORTSTATS)) {
1487 if (tty->flags & (1 << TTY_IO_ERROR))
Jesper Juhl014c2542006-01-15 02:37:08 +01001488 return -EIO;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001489 }
1490
1491 rc = 0;
1492
1493 switch (cmd) {
1494 case TIOCGSOFTCAR:
1495 rc = put_user(((tty->termios->c_cflag & CLOCAL) ? 1 : 0),
1496 (unsigned __user *) argp);
1497 break;
1498 case TIOCSSOFTCAR:
1499 if (get_user(ival, (unsigned int __user *) arg))
1500 return -EFAULT;
1501 tty->termios->c_cflag =
1502 (tty->termios->c_cflag & ~CLOCAL) |
1503 (ival ? CLOCAL : 0);
1504 break;
1505 case TIOCGSERIAL:
1506 rc = stl_getserial(portp, argp);
1507 break;
1508 case TIOCSSERIAL:
1509 rc = stl_setserial(portp, argp);
1510 break;
1511 case COM_GETPORTSTATS:
1512 rc = stl_getportstats(portp, argp);
1513 break;
1514 case COM_CLRPORTSTATS:
1515 rc = stl_clrportstats(portp, argp);
1516 break;
1517 case TIOCSERCONFIG:
1518 case TIOCSERGWILD:
1519 case TIOCSERSWILD:
1520 case TIOCSERGETLSR:
1521 case TIOCSERGSTRUCT:
1522 case TIOCSERGETMULTI:
1523 case TIOCSERSETMULTI:
1524 default:
1525 rc = -ENOIOCTLCMD;
1526 break;
1527 }
1528
Jesper Juhl014c2542006-01-15 02:37:08 +01001529 return rc;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001530}
1531
1532/*****************************************************************************/
1533
1534static void stl_settermios(struct tty_struct *tty, struct termios *old)
1535{
1536 stlport_t *portp;
1537 struct termios *tiosp;
1538
1539#ifdef DEBUG
1540 printk("stl_settermios(tty=%x,old=%x)\n", (int) tty, (int) old);
1541#endif
1542
1543 if (tty == (struct tty_struct *) NULL)
1544 return;
1545 portp = tty->driver_data;
1546 if (portp == (stlport_t *) NULL)
1547 return;
1548
1549 tiosp = tty->termios;
1550 if ((tiosp->c_cflag == old->c_cflag) &&
1551 (tiosp->c_iflag == old->c_iflag))
1552 return;
1553
1554 stl_setport(portp, tiosp);
1555 stl_setsignals(portp, ((tiosp->c_cflag & (CBAUD & ~CBAUDEX)) ? 1 : 0),
1556 -1);
1557 if ((old->c_cflag & CRTSCTS) && ((tiosp->c_cflag & CRTSCTS) == 0)) {
1558 tty->hw_stopped = 0;
1559 stl_start(tty);
1560 }
1561 if (((old->c_cflag & CLOCAL) == 0) && (tiosp->c_cflag & CLOCAL))
1562 wake_up_interruptible(&portp->open_wait);
1563}
1564
1565/*****************************************************************************/
1566
1567/*
1568 * Attempt to flow control who ever is sending us data. Based on termios
1569 * settings use software or/and hardware flow control.
1570 */
1571
1572static void stl_throttle(struct tty_struct *tty)
1573{
1574 stlport_t *portp;
1575
1576#ifdef DEBUG
1577 printk("stl_throttle(tty=%x)\n", (int) tty);
1578#endif
1579
1580 if (tty == (struct tty_struct *) NULL)
1581 return;
1582 portp = tty->driver_data;
1583 if (portp == (stlport_t *) NULL)
1584 return;
1585 stl_flowctrl(portp, 0);
1586}
1587
1588/*****************************************************************************/
1589
1590/*
1591 * Unflow control the device sending us data...
1592 */
1593
1594static void stl_unthrottle(struct tty_struct *tty)
1595{
1596 stlport_t *portp;
1597
1598#ifdef DEBUG
1599 printk("stl_unthrottle(tty=%x)\n", (int) tty);
1600#endif
1601
1602 if (tty == (struct tty_struct *) NULL)
1603 return;
1604 portp = tty->driver_data;
1605 if (portp == (stlport_t *) NULL)
1606 return;
1607 stl_flowctrl(portp, 1);
1608}
1609
1610/*****************************************************************************/
1611
1612/*
1613 * Stop the transmitter. Basically to do this we will just turn TX
1614 * interrupts off.
1615 */
1616
1617static void stl_stop(struct tty_struct *tty)
1618{
1619 stlport_t *portp;
1620
1621#ifdef DEBUG
1622 printk("stl_stop(tty=%x)\n", (int) tty);
1623#endif
1624
1625 if (tty == (struct tty_struct *) NULL)
1626 return;
1627 portp = tty->driver_data;
1628 if (portp == (stlport_t *) NULL)
1629 return;
1630 stl_startrxtx(portp, -1, 0);
1631}
1632
1633/*****************************************************************************/
1634
1635/*
1636 * Start the transmitter again. Just turn TX interrupts back on.
1637 */
1638
1639static void stl_start(struct tty_struct *tty)
1640{
1641 stlport_t *portp;
1642
1643#ifdef DEBUG
1644 printk("stl_start(tty=%x)\n", (int) tty);
1645#endif
1646
1647 if (tty == (struct tty_struct *) NULL)
1648 return;
1649 portp = tty->driver_data;
1650 if (portp == (stlport_t *) NULL)
1651 return;
1652 stl_startrxtx(portp, -1, 1);
1653}
1654
1655/*****************************************************************************/
1656
1657/*
1658 * Hangup this port. This is pretty much like closing the port, only
1659 * a little more brutal. No waiting for data to drain. Shutdown the
1660 * port and maybe drop signals.
1661 */
1662
1663static void stl_hangup(struct tty_struct *tty)
1664{
1665 stlport_t *portp;
1666
1667#ifdef DEBUG
1668 printk("stl_hangup(tty=%x)\n", (int) tty);
1669#endif
1670
1671 if (tty == (struct tty_struct *) NULL)
1672 return;
1673 portp = tty->driver_data;
1674 if (portp == (stlport_t *) NULL)
1675 return;
1676
1677 portp->flags &= ~ASYNC_INITIALIZED;
1678 stl_disableintrs(portp);
1679 if (tty->termios->c_cflag & HUPCL)
1680 stl_setsignals(portp, 0, 0);
1681 stl_enablerxtx(portp, 0, 0);
1682 stl_flushbuffer(tty);
1683 portp->istate = 0;
1684 set_bit(TTY_IO_ERROR, &tty->flags);
1685 if (portp->tx.buf != (char *) NULL) {
1686 kfree(portp->tx.buf);
1687 portp->tx.buf = (char *) NULL;
1688 portp->tx.head = (char *) NULL;
1689 portp->tx.tail = (char *) NULL;
1690 }
1691 portp->tty = (struct tty_struct *) NULL;
1692 portp->flags &= ~ASYNC_NORMAL_ACTIVE;
1693 portp->refcount = 0;
1694 wake_up_interruptible(&portp->open_wait);
1695}
1696
1697/*****************************************************************************/
1698
1699static void stl_flushbuffer(struct tty_struct *tty)
1700{
1701 stlport_t *portp;
1702
1703#ifdef DEBUG
1704 printk("stl_flushbuffer(tty=%x)\n", (int) tty);
1705#endif
1706
1707 if (tty == (struct tty_struct *) NULL)
1708 return;
1709 portp = tty->driver_data;
1710 if (portp == (stlport_t *) NULL)
1711 return;
1712
1713 stl_flush(portp);
1714 tty_wakeup(tty);
1715}
1716
1717/*****************************************************************************/
1718
1719static void stl_breakctl(struct tty_struct *tty, int state)
1720{
1721 stlport_t *portp;
1722
1723#ifdef DEBUG
1724 printk("stl_breakctl(tty=%x,state=%d)\n", (int) tty, state);
1725#endif
1726
1727 if (tty == (struct tty_struct *) NULL)
1728 return;
1729 portp = tty->driver_data;
1730 if (portp == (stlport_t *) NULL)
1731 return;
1732
1733 stl_sendbreak(portp, ((state == -1) ? 1 : 2));
1734}
1735
1736/*****************************************************************************/
1737
1738static void stl_waituntilsent(struct tty_struct *tty, int timeout)
1739{
1740 stlport_t *portp;
1741 unsigned long tend;
1742
1743#ifdef DEBUG
1744 printk("stl_waituntilsent(tty=%x,timeout=%d)\n", (int) tty, timeout);
1745#endif
1746
1747 if (tty == (struct tty_struct *) NULL)
1748 return;
1749 portp = tty->driver_data;
1750 if (portp == (stlport_t *) NULL)
1751 return;
1752
1753 if (timeout == 0)
1754 timeout = HZ;
1755 tend = jiffies + timeout;
1756
1757 while (stl_datastate(portp)) {
1758 if (signal_pending(current))
1759 break;
1760 msleep_interruptible(20);
1761 if (time_after_eq(jiffies, tend))
1762 break;
1763 }
1764}
1765
1766/*****************************************************************************/
1767
1768static void stl_sendxchar(struct tty_struct *tty, char ch)
1769{
1770 stlport_t *portp;
1771
1772#ifdef DEBUG
1773 printk("stl_sendxchar(tty=%x,ch=%x)\n", (int) tty, ch);
1774#endif
1775
1776 if (tty == (struct tty_struct *) NULL)
1777 return;
1778 portp = tty->driver_data;
1779 if (portp == (stlport_t *) NULL)
1780 return;
1781
1782 if (ch == STOP_CHAR(tty))
1783 stl_sendflow(portp, 0);
1784 else if (ch == START_CHAR(tty))
1785 stl_sendflow(portp, 1);
1786 else
1787 stl_putchar(tty, ch);
1788}
1789
1790/*****************************************************************************/
1791
1792#define MAXLINE 80
1793
1794/*
1795 * Format info for a specified port. The line is deliberately limited
1796 * to 80 characters. (If it is too long it will be truncated, if too
1797 * short then padded with spaces).
1798 */
1799
1800static int stl_portinfo(stlport_t *portp, int portnr, char *pos)
1801{
1802 char *sp;
1803 int sigs, cnt;
1804
1805 sp = pos;
1806 sp += sprintf(sp, "%d: uart:%s tx:%d rx:%d",
1807 portnr, (portp->hwid == 1) ? "SC26198" : "CD1400",
1808 (int) portp->stats.txtotal, (int) portp->stats.rxtotal);
1809
1810 if (portp->stats.rxframing)
1811 sp += sprintf(sp, " fe:%d", (int) portp->stats.rxframing);
1812 if (portp->stats.rxparity)
1813 sp += sprintf(sp, " pe:%d", (int) portp->stats.rxparity);
1814 if (portp->stats.rxbreaks)
1815 sp += sprintf(sp, " brk:%d", (int) portp->stats.rxbreaks);
1816 if (portp->stats.rxoverrun)
1817 sp += sprintf(sp, " oe:%d", (int) portp->stats.rxoverrun);
1818
1819 sigs = stl_getsignals(portp);
1820 cnt = sprintf(sp, "%s%s%s%s%s ",
1821 (sigs & TIOCM_RTS) ? "|RTS" : "",
1822 (sigs & TIOCM_CTS) ? "|CTS" : "",
1823 (sigs & TIOCM_DTR) ? "|DTR" : "",
1824 (sigs & TIOCM_CD) ? "|DCD" : "",
1825 (sigs & TIOCM_DSR) ? "|DSR" : "");
1826 *sp = ' ';
1827 sp += cnt;
1828
1829 for (cnt = (sp - pos); (cnt < (MAXLINE - 1)); cnt++)
1830 *sp++ = ' ';
1831 if (cnt >= MAXLINE)
1832 pos[(MAXLINE - 2)] = '+';
1833 pos[(MAXLINE - 1)] = '\n';
1834
Jesper Juhl014c2542006-01-15 02:37:08 +01001835 return MAXLINE;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001836}
1837
1838/*****************************************************************************/
1839
1840/*
1841 * Port info, read from the /proc file system.
1842 */
1843
1844static int stl_readproc(char *page, char **start, off_t off, int count, int *eof, void *data)
1845{
1846 stlbrd_t *brdp;
1847 stlpanel_t *panelp;
1848 stlport_t *portp;
1849 int brdnr, panelnr, portnr, totalport;
1850 int curoff, maxoff;
1851 char *pos;
1852
1853#ifdef DEBUG
1854 printk("stl_readproc(page=%x,start=%x,off=%x,count=%d,eof=%x,"
1855 "data=%x\n", (int) page, (int) start, (int) off, count,
1856 (int) eof, (int) data);
1857#endif
1858
1859 pos = page;
1860 totalport = 0;
1861 curoff = 0;
1862
1863 if (off == 0) {
1864 pos += sprintf(pos, "%s: version %s", stl_drvtitle,
1865 stl_drvversion);
1866 while (pos < (page + MAXLINE - 1))
1867 *pos++ = ' ';
1868 *pos++ = '\n';
1869 }
1870 curoff = MAXLINE;
1871
1872/*
1873 * We scan through for each board, panel and port. The offset is
1874 * calculated on the fly, and irrelevant ports are skipped.
1875 */
1876 for (brdnr = 0; (brdnr < stl_nrbrds); brdnr++) {
1877 brdp = stl_brds[brdnr];
1878 if (brdp == (stlbrd_t *) NULL)
1879 continue;
1880 if (brdp->state == 0)
1881 continue;
1882
1883 maxoff = curoff + (brdp->nrports * MAXLINE);
1884 if (off >= maxoff) {
1885 curoff = maxoff;
1886 continue;
1887 }
1888
1889 totalport = brdnr * STL_MAXPORTS;
1890 for (panelnr = 0; (panelnr < brdp->nrpanels); panelnr++) {
1891 panelp = brdp->panels[panelnr];
1892 if (panelp == (stlpanel_t *) NULL)
1893 continue;
1894
1895 maxoff = curoff + (panelp->nrports * MAXLINE);
1896 if (off >= maxoff) {
1897 curoff = maxoff;
1898 totalport += panelp->nrports;
1899 continue;
1900 }
1901
1902 for (portnr = 0; (portnr < panelp->nrports); portnr++,
1903 totalport++) {
1904 portp = panelp->ports[portnr];
1905 if (portp == (stlport_t *) NULL)
1906 continue;
1907 if (off >= (curoff += MAXLINE))
1908 continue;
1909 if ((pos - page + MAXLINE) > count)
1910 goto stl_readdone;
1911 pos += stl_portinfo(portp, totalport, pos);
1912 }
1913 }
1914 }
1915
1916 *eof = 1;
1917
1918stl_readdone:
1919 *start = page;
Jesper Juhl014c2542006-01-15 02:37:08 +01001920 return (pos - page);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001921}
1922
1923/*****************************************************************************/
1924
1925/*
1926 * All board interrupts are vectored through here first. This code then
1927 * calls off to the approrpriate board interrupt handlers.
1928 */
1929
David Howells7d12e782006-10-05 14:55:46 +01001930static irqreturn_t stl_intr(int irq, void *dev_id)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001931{
1932 stlbrd_t *brdp = (stlbrd_t *) dev_id;
1933
1934#ifdef DEBUG
David Howells7d12e782006-10-05 14:55:46 +01001935 printk("stl_intr(brdp=%x,irq=%d)\n", (int) brdp, irq);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001936#endif
1937
1938 return IRQ_RETVAL((* brdp->isr)(brdp));
1939}
1940
1941/*****************************************************************************/
1942
1943/*
1944 * Interrupt service routine for EasyIO board types.
1945 */
1946
1947static int stl_eiointr(stlbrd_t *brdp)
1948{
1949 stlpanel_t *panelp;
1950 unsigned int iobase;
1951 int handled = 0;
1952
Alan Coxb65b5b52006-06-27 02:54:05 -07001953 spin_lock(&brd_lock);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001954 panelp = brdp->panels[0];
1955 iobase = panelp->iobase;
1956 while (inb(brdp->iostatus) & EIO_INTRPEND) {
1957 handled = 1;
1958 (* panelp->isr)(panelp, iobase);
1959 }
Alan Coxb65b5b52006-06-27 02:54:05 -07001960 spin_unlock(&brd_lock);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001961 return handled;
1962}
1963
1964/*****************************************************************************/
1965
1966/*
1967 * Interrupt service routine for ECH-AT board types.
1968 */
1969
1970static int stl_echatintr(stlbrd_t *brdp)
1971{
1972 stlpanel_t *panelp;
1973 unsigned int ioaddr;
1974 int bnknr;
1975 int handled = 0;
1976
1977 outb((brdp->ioctrlval | ECH_BRDENABLE), brdp->ioctrl);
1978
1979 while (inb(brdp->iostatus) & ECH_INTRPEND) {
1980 handled = 1;
1981 for (bnknr = 0; (bnknr < brdp->nrbnks); bnknr++) {
1982 ioaddr = brdp->bnkstataddr[bnknr];
1983 if (inb(ioaddr) & ECH_PNLINTRPEND) {
1984 panelp = brdp->bnk2panel[bnknr];
1985 (* panelp->isr)(panelp, (ioaddr & 0xfffc));
1986 }
1987 }
1988 }
1989
1990 outb((brdp->ioctrlval | ECH_BRDDISABLE), brdp->ioctrl);
1991
1992 return handled;
1993}
1994
1995/*****************************************************************************/
1996
1997/*
1998 * Interrupt service routine for ECH-MCA board types.
1999 */
2000
2001static int stl_echmcaintr(stlbrd_t *brdp)
2002{
2003 stlpanel_t *panelp;
2004 unsigned int ioaddr;
2005 int bnknr;
2006 int handled = 0;
2007
2008 while (inb(brdp->iostatus) & ECH_INTRPEND) {
2009 handled = 1;
2010 for (bnknr = 0; (bnknr < brdp->nrbnks); bnknr++) {
2011 ioaddr = brdp->bnkstataddr[bnknr];
2012 if (inb(ioaddr) & ECH_PNLINTRPEND) {
2013 panelp = brdp->bnk2panel[bnknr];
2014 (* panelp->isr)(panelp, (ioaddr & 0xfffc));
2015 }
2016 }
2017 }
2018 return handled;
2019}
2020
2021/*****************************************************************************/
2022
2023/*
2024 * Interrupt service routine for ECH-PCI board types.
2025 */
2026
2027static int stl_echpciintr(stlbrd_t *brdp)
2028{
2029 stlpanel_t *panelp;
2030 unsigned int ioaddr;
2031 int bnknr, recheck;
2032 int handled = 0;
2033
2034 while (1) {
2035 recheck = 0;
2036 for (bnknr = 0; (bnknr < brdp->nrbnks); bnknr++) {
2037 outb(brdp->bnkpageaddr[bnknr], brdp->ioctrl);
2038 ioaddr = brdp->bnkstataddr[bnknr];
2039 if (inb(ioaddr) & ECH_PNLINTRPEND) {
2040 panelp = brdp->bnk2panel[bnknr];
2041 (* panelp->isr)(panelp, (ioaddr & 0xfffc));
2042 recheck++;
2043 handled = 1;
2044 }
2045 }
2046 if (! recheck)
2047 break;
2048 }
2049 return handled;
2050}
2051
2052/*****************************************************************************/
2053
2054/*
2055 * Interrupt service routine for ECH-8/64-PCI board types.
2056 */
2057
2058static int stl_echpci64intr(stlbrd_t *brdp)
2059{
2060 stlpanel_t *panelp;
2061 unsigned int ioaddr;
2062 int bnknr;
2063 int handled = 0;
2064
2065 while (inb(brdp->ioctrl) & 0x1) {
2066 handled = 1;
2067 for (bnknr = 0; (bnknr < brdp->nrbnks); bnknr++) {
2068 ioaddr = brdp->bnkstataddr[bnknr];
2069 if (inb(ioaddr) & ECH_PNLINTRPEND) {
2070 panelp = brdp->bnk2panel[bnknr];
2071 (* panelp->isr)(panelp, (ioaddr & 0xfffc));
2072 }
2073 }
2074 }
2075
2076 return handled;
2077}
2078
2079/*****************************************************************************/
2080
2081/*
2082 * Service an off-level request for some channel.
2083 */
2084static void stl_offintr(void *private)
2085{
2086 stlport_t *portp;
2087 struct tty_struct *tty;
2088 unsigned int oldsigs;
2089
2090 portp = private;
2091
2092#ifdef DEBUG
2093 printk("stl_offintr(portp=%x)\n", (int) portp);
2094#endif
2095
2096 if (portp == (stlport_t *) NULL)
2097 return;
2098
2099 tty = portp->tty;
2100 if (tty == (struct tty_struct *) NULL)
2101 return;
2102
2103 lock_kernel();
2104 if (test_bit(ASYI_TXLOW, &portp->istate)) {
2105 tty_wakeup(tty);
2106 }
2107 if (test_bit(ASYI_DCDCHANGE, &portp->istate)) {
2108 clear_bit(ASYI_DCDCHANGE, &portp->istate);
2109 oldsigs = portp->sigs;
2110 portp->sigs = stl_getsignals(portp);
2111 if ((portp->sigs & TIOCM_CD) && ((oldsigs & TIOCM_CD) == 0))
2112 wake_up_interruptible(&portp->open_wait);
2113 if ((oldsigs & TIOCM_CD) && ((portp->sigs & TIOCM_CD) == 0)) {
2114 if (portp->flags & ASYNC_CHECK_CD)
2115 tty_hangup(tty); /* FIXME: module removal race here - AKPM */
2116 }
2117 }
2118 unlock_kernel();
2119}
2120
2121/*****************************************************************************/
2122
2123/*
2124 * Initialize all the ports on a panel.
2125 */
2126
2127static int __init stl_initports(stlbrd_t *brdp, stlpanel_t *panelp)
2128{
2129 stlport_t *portp;
2130 int chipmask, i;
2131
2132#ifdef DEBUG
2133 printk("stl_initports(brdp=%x,panelp=%x)\n", (int) brdp, (int) panelp);
2134#endif
2135
2136 chipmask = stl_panelinit(brdp, panelp);
2137
2138/*
2139 * All UART's are initialized (if found!). Now go through and setup
2140 * each ports data structures.
2141 */
2142 for (i = 0; (i < panelp->nrports); i++) {
Tobias Klauserb0b4ed72006-03-31 02:30:56 -08002143 portp = kzalloc(sizeof(stlport_t), GFP_KERNEL);
2144 if (!portp) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07002145 printk("STALLION: failed to allocate memory "
Alan Coxb65b5b52006-06-27 02:54:05 -07002146 "(size=%Zd)\n", sizeof(stlport_t));
Linus Torvalds1da177e2005-04-16 15:20:36 -07002147 break;
2148 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07002149
2150 portp->magic = STL_PORTMAGIC;
2151 portp->portnr = i;
2152 portp->brdnr = panelp->brdnr;
2153 portp->panelnr = panelp->panelnr;
2154 portp->uartp = panelp->uartp;
2155 portp->clk = brdp->clk;
2156 portp->baud_base = STL_BAUDBASE;
2157 portp->close_delay = STL_CLOSEDELAY;
2158 portp->closing_wait = 30 * HZ;
2159 INIT_WORK(&portp->tqueue, stl_offintr, portp);
2160 init_waitqueue_head(&portp->open_wait);
2161 init_waitqueue_head(&portp->close_wait);
2162 portp->stats.brd = portp->brdnr;
2163 portp->stats.panel = portp->panelnr;
2164 portp->stats.port = portp->portnr;
2165 panelp->ports[i] = portp;
2166 stl_portinit(brdp, panelp, portp);
2167 }
2168
2169 return(0);
2170}
2171
2172/*****************************************************************************/
2173
2174/*
2175 * Try to find and initialize an EasyIO board.
2176 */
2177
2178static inline int stl_initeio(stlbrd_t *brdp)
2179{
2180 stlpanel_t *panelp;
2181 unsigned int status;
2182 char *name;
2183 int rc;
2184
2185#ifdef DEBUG
2186 printk("stl_initeio(brdp=%x)\n", (int) brdp);
2187#endif
2188
2189 brdp->ioctrl = brdp->ioaddr1 + 1;
2190 brdp->iostatus = brdp->ioaddr1 + 2;
2191
2192 status = inb(brdp->iostatus);
2193 if ((status & EIO_IDBITMASK) == EIO_MK3)
2194 brdp->ioctrl++;
2195
2196/*
2197 * Handle board specific stuff now. The real difference is PCI
2198 * or not PCI.
2199 */
2200 if (brdp->brdtype == BRD_EASYIOPCI) {
2201 brdp->iosize1 = 0x80;
2202 brdp->iosize2 = 0x80;
2203 name = "serial(EIO-PCI)";
2204 outb(0x41, (brdp->ioaddr2 + 0x4c));
2205 } else {
2206 brdp->iosize1 = 8;
2207 name = "serial(EIO)";
2208 if ((brdp->irq < 0) || (brdp->irq > 15) ||
2209 (stl_vecmap[brdp->irq] == (unsigned char) 0xff)) {
2210 printk("STALLION: invalid irq=%d for brd=%d\n",
2211 brdp->irq, brdp->brdnr);
2212 return(-EINVAL);
2213 }
2214 outb((stl_vecmap[brdp->irq] | EIO_0WS |
2215 ((brdp->irqtype) ? EIO_INTLEVEL : EIO_INTEDGE)),
2216 brdp->ioctrl);
2217 }
2218
2219 if (!request_region(brdp->ioaddr1, brdp->iosize1, name)) {
2220 printk(KERN_WARNING "STALLION: Warning, board %d I/O address "
2221 "%x conflicts with another device\n", brdp->brdnr,
2222 brdp->ioaddr1);
2223 return(-EBUSY);
2224 }
2225
2226 if (brdp->iosize2 > 0)
2227 if (!request_region(brdp->ioaddr2, brdp->iosize2, name)) {
2228 printk(KERN_WARNING "STALLION: Warning, board %d I/O "
2229 "address %x conflicts with another device\n",
2230 brdp->brdnr, brdp->ioaddr2);
2231 printk(KERN_WARNING "STALLION: Warning, also "
2232 "releasing board %d I/O address %x \n",
2233 brdp->brdnr, brdp->ioaddr1);
2234 release_region(brdp->ioaddr1, brdp->iosize1);
2235 return(-EBUSY);
2236 }
2237
2238/*
2239 * Everything looks OK, so let's go ahead and probe for the hardware.
2240 */
2241 brdp->clk = CD1400_CLK;
2242 brdp->isr = stl_eiointr;
2243
2244 switch (status & EIO_IDBITMASK) {
2245 case EIO_8PORTM:
2246 brdp->clk = CD1400_CLK8M;
2247 /* fall thru */
2248 case EIO_8PORTRS:
2249 case EIO_8PORTDI:
2250 brdp->nrports = 8;
2251 break;
2252 case EIO_4PORTRS:
2253 brdp->nrports = 4;
2254 break;
2255 case EIO_MK3:
2256 switch (status & EIO_BRDMASK) {
2257 case ID_BRD4:
2258 brdp->nrports = 4;
2259 break;
2260 case ID_BRD8:
2261 brdp->nrports = 8;
2262 break;
2263 case ID_BRD16:
2264 brdp->nrports = 16;
2265 break;
2266 default:
2267 return(-ENODEV);
2268 }
2269 break;
2270 default:
2271 return(-ENODEV);
2272 }
2273
2274/*
2275 * We have verified that the board is actually present, so now we
2276 * can complete the setup.
2277 */
2278
Tobias Klauserb0b4ed72006-03-31 02:30:56 -08002279 panelp = kzalloc(sizeof(stlpanel_t), GFP_KERNEL);
2280 if (!panelp) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07002281 printk(KERN_WARNING "STALLION: failed to allocate memory "
Alan Coxb65b5b52006-06-27 02:54:05 -07002282 "(size=%Zd)\n", sizeof(stlpanel_t));
Tobias Klauserb0b4ed72006-03-31 02:30:56 -08002283 return -ENOMEM;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002284 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07002285
2286 panelp->magic = STL_PANELMAGIC;
2287 panelp->brdnr = brdp->brdnr;
2288 panelp->panelnr = 0;
2289 panelp->nrports = brdp->nrports;
2290 panelp->iobase = brdp->ioaddr1;
2291 panelp->hwid = status;
2292 if ((status & EIO_IDBITMASK) == EIO_MK3) {
2293 panelp->uartp = (void *) &stl_sc26198uart;
2294 panelp->isr = stl_sc26198intr;
2295 } else {
2296 panelp->uartp = (void *) &stl_cd1400uart;
2297 panelp->isr = stl_cd1400eiointr;
2298 }
2299
2300 brdp->panels[0] = panelp;
2301 brdp->nrpanels = 1;
2302 brdp->state |= BRD_FOUND;
2303 brdp->hwid = status;
Thomas Gleixner0f2ed4c2006-07-01 19:29:33 -07002304 if (request_irq(brdp->irq, stl_intr, IRQF_SHARED, name, brdp) != 0) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07002305 printk("STALLION: failed to register interrupt "
2306 "routine for %s irq=%d\n", name, brdp->irq);
2307 rc = -ENODEV;
2308 } else {
2309 rc = 0;
2310 }
Jesper Juhl014c2542006-01-15 02:37:08 +01002311 return rc;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002312}
2313
2314/*****************************************************************************/
2315
2316/*
2317 * Try to find an ECH board and initialize it. This code is capable of
2318 * dealing with all types of ECH board.
2319 */
2320
2321static inline int stl_initech(stlbrd_t *brdp)
2322{
2323 stlpanel_t *panelp;
2324 unsigned int status, nxtid, ioaddr, conflict;
2325 int panelnr, banknr, i;
2326 char *name;
2327
2328#ifdef DEBUG
2329 printk("stl_initech(brdp=%x)\n", (int) brdp);
2330#endif
2331
2332 status = 0;
2333 conflict = 0;
2334
2335/*
2336 * Set up the initial board register contents for boards. This varies a
2337 * bit between the different board types. So we need to handle each
2338 * separately. Also do a check that the supplied IRQ is good.
2339 */
2340 switch (brdp->brdtype) {
2341
2342 case BRD_ECH:
2343 brdp->isr = stl_echatintr;
2344 brdp->ioctrl = brdp->ioaddr1 + 1;
2345 brdp->iostatus = brdp->ioaddr1 + 1;
2346 status = inb(brdp->iostatus);
2347 if ((status & ECH_IDBITMASK) != ECH_ID)
2348 return(-ENODEV);
2349 if ((brdp->irq < 0) || (brdp->irq > 15) ||
2350 (stl_vecmap[brdp->irq] == (unsigned char) 0xff)) {
2351 printk("STALLION: invalid irq=%d for brd=%d\n",
2352 brdp->irq, brdp->brdnr);
2353 return(-EINVAL);
2354 }
2355 status = ((brdp->ioaddr2 & ECH_ADDR2MASK) >> 1);
2356 status |= (stl_vecmap[brdp->irq] << 1);
2357 outb((status | ECH_BRDRESET), brdp->ioaddr1);
2358 brdp->ioctrlval = ECH_INTENABLE |
2359 ((brdp->irqtype) ? ECH_INTLEVEL : ECH_INTEDGE);
2360 for (i = 0; (i < 10); i++)
2361 outb((brdp->ioctrlval | ECH_BRDENABLE), brdp->ioctrl);
2362 brdp->iosize1 = 2;
2363 brdp->iosize2 = 32;
2364 name = "serial(EC8/32)";
2365 outb(status, brdp->ioaddr1);
2366 break;
2367
2368 case BRD_ECHMC:
2369 brdp->isr = stl_echmcaintr;
2370 brdp->ioctrl = brdp->ioaddr1 + 0x20;
2371 brdp->iostatus = brdp->ioctrl;
2372 status = inb(brdp->iostatus);
2373 if ((status & ECH_IDBITMASK) != ECH_ID)
2374 return(-ENODEV);
2375 if ((brdp->irq < 0) || (brdp->irq > 15) ||
2376 (stl_vecmap[brdp->irq] == (unsigned char) 0xff)) {
2377 printk("STALLION: invalid irq=%d for brd=%d\n",
2378 brdp->irq, brdp->brdnr);
2379 return(-EINVAL);
2380 }
2381 outb(ECHMC_BRDRESET, brdp->ioctrl);
2382 outb(ECHMC_INTENABLE, brdp->ioctrl);
2383 brdp->iosize1 = 64;
2384 name = "serial(EC8/32-MC)";
2385 break;
2386
2387 case BRD_ECHPCI:
2388 brdp->isr = stl_echpciintr;
2389 brdp->ioctrl = brdp->ioaddr1 + 2;
2390 brdp->iosize1 = 4;
2391 brdp->iosize2 = 8;
2392 name = "serial(EC8/32-PCI)";
2393 break;
2394
2395 case BRD_ECH64PCI:
2396 brdp->isr = stl_echpci64intr;
2397 brdp->ioctrl = brdp->ioaddr2 + 0x40;
2398 outb(0x43, (brdp->ioaddr1 + 0x4c));
2399 brdp->iosize1 = 0x80;
2400 brdp->iosize2 = 0x80;
2401 name = "serial(EC8/64-PCI)";
2402 break;
2403
2404 default:
2405 printk("STALLION: unknown board type=%d\n", brdp->brdtype);
2406 return(-EINVAL);
2407 break;
2408 }
2409
2410/*
2411 * Check boards for possible IO address conflicts and return fail status
2412 * if an IO conflict found.
2413 */
2414 if (!request_region(brdp->ioaddr1, brdp->iosize1, name)) {
2415 printk(KERN_WARNING "STALLION: Warning, board %d I/O address "
2416 "%x conflicts with another device\n", brdp->brdnr,
2417 brdp->ioaddr1);
2418 return(-EBUSY);
2419 }
2420
2421 if (brdp->iosize2 > 0)
2422 if (!request_region(brdp->ioaddr2, brdp->iosize2, name)) {
2423 printk(KERN_WARNING "STALLION: Warning, board %d I/O "
2424 "address %x conflicts with another device\n",
2425 brdp->brdnr, brdp->ioaddr2);
2426 printk(KERN_WARNING "STALLION: Warning, also "
2427 "releasing board %d I/O address %x \n",
2428 brdp->brdnr, brdp->ioaddr1);
2429 release_region(brdp->ioaddr1, brdp->iosize1);
2430 return(-EBUSY);
2431 }
2432
2433/*
2434 * Scan through the secondary io address space looking for panels.
2435 * As we find'em allocate and initialize panel structures for each.
2436 */
2437 brdp->clk = CD1400_CLK;
2438 brdp->hwid = status;
2439
2440 ioaddr = brdp->ioaddr2;
2441 banknr = 0;
2442 panelnr = 0;
2443 nxtid = 0;
2444
2445 for (i = 0; (i < STL_MAXPANELS); i++) {
2446 if (brdp->brdtype == BRD_ECHPCI) {
2447 outb(nxtid, brdp->ioctrl);
2448 ioaddr = brdp->ioaddr2;
2449 }
2450 status = inb(ioaddr + ECH_PNLSTATUS);
2451 if ((status & ECH_PNLIDMASK) != nxtid)
2452 break;
Tobias Klauserb0b4ed72006-03-31 02:30:56 -08002453 panelp = kzalloc(sizeof(stlpanel_t), GFP_KERNEL);
2454 if (!panelp) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07002455 printk("STALLION: failed to allocate memory "
Alan Coxb65b5b52006-06-27 02:54:05 -07002456 "(size=%Zd)\n", sizeof(stlpanel_t));
Linus Torvalds1da177e2005-04-16 15:20:36 -07002457 break;
2458 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07002459 panelp->magic = STL_PANELMAGIC;
2460 panelp->brdnr = brdp->brdnr;
2461 panelp->panelnr = panelnr;
2462 panelp->iobase = ioaddr;
2463 panelp->pagenr = nxtid;
2464 panelp->hwid = status;
2465 brdp->bnk2panel[banknr] = panelp;
2466 brdp->bnkpageaddr[banknr] = nxtid;
2467 brdp->bnkstataddr[banknr++] = ioaddr + ECH_PNLSTATUS;
2468
2469 if (status & ECH_PNLXPID) {
2470 panelp->uartp = (void *) &stl_sc26198uart;
2471 panelp->isr = stl_sc26198intr;
2472 if (status & ECH_PNL16PORT) {
2473 panelp->nrports = 16;
2474 brdp->bnk2panel[banknr] = panelp;
2475 brdp->bnkpageaddr[banknr] = nxtid;
2476 brdp->bnkstataddr[banknr++] = ioaddr + 4 +
2477 ECH_PNLSTATUS;
2478 } else {
2479 panelp->nrports = 8;
2480 }
2481 } else {
2482 panelp->uartp = (void *) &stl_cd1400uart;
2483 panelp->isr = stl_cd1400echintr;
2484 if (status & ECH_PNL16PORT) {
2485 panelp->nrports = 16;
2486 panelp->ackmask = 0x80;
2487 if (brdp->brdtype != BRD_ECHPCI)
2488 ioaddr += EREG_BANKSIZE;
2489 brdp->bnk2panel[banknr] = panelp;
2490 brdp->bnkpageaddr[banknr] = ++nxtid;
2491 brdp->bnkstataddr[banknr++] = ioaddr +
2492 ECH_PNLSTATUS;
2493 } else {
2494 panelp->nrports = 8;
2495 panelp->ackmask = 0xc0;
2496 }
2497 }
2498
2499 nxtid++;
2500 ioaddr += EREG_BANKSIZE;
2501 brdp->nrports += panelp->nrports;
2502 brdp->panels[panelnr++] = panelp;
2503 if ((brdp->brdtype != BRD_ECHPCI) &&
2504 (ioaddr >= (brdp->ioaddr2 + brdp->iosize2)))
2505 break;
2506 }
2507
2508 brdp->nrpanels = panelnr;
2509 brdp->nrbnks = banknr;
2510 if (brdp->brdtype == BRD_ECH)
2511 outb((brdp->ioctrlval | ECH_BRDDISABLE), brdp->ioctrl);
2512
2513 brdp->state |= BRD_FOUND;
Thomas Gleixner0f2ed4c2006-07-01 19:29:33 -07002514 if (request_irq(brdp->irq, stl_intr, IRQF_SHARED, name, brdp) != 0) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07002515 printk("STALLION: failed to register interrupt "
2516 "routine for %s irq=%d\n", name, brdp->irq);
2517 i = -ENODEV;
2518 } else {
2519 i = 0;
2520 }
2521
2522 return(i);
2523}
2524
2525/*****************************************************************************/
2526
2527/*
2528 * Initialize and configure the specified board.
2529 * Scan through all the boards in the configuration and see what we
2530 * can find. Handle EIO and the ECH boards a little differently here
2531 * since the initial search and setup is very different.
2532 */
2533
2534static int __init stl_brdinit(stlbrd_t *brdp)
2535{
2536 int i;
2537
2538#ifdef DEBUG
2539 printk("stl_brdinit(brdp=%x)\n", (int) brdp);
2540#endif
2541
2542 switch (brdp->brdtype) {
2543 case BRD_EASYIO:
2544 case BRD_EASYIOPCI:
2545 stl_initeio(brdp);
2546 break;
2547 case BRD_ECH:
2548 case BRD_ECHMC:
2549 case BRD_ECHPCI:
2550 case BRD_ECH64PCI:
2551 stl_initech(brdp);
2552 break;
2553 default:
2554 printk("STALLION: board=%d is unknown board type=%d\n",
2555 brdp->brdnr, brdp->brdtype);
2556 return(ENODEV);
2557 }
2558
2559 stl_brds[brdp->brdnr] = brdp;
2560 if ((brdp->state & BRD_FOUND) == 0) {
2561 printk("STALLION: %s board not found, board=%d io=%x irq=%d\n",
2562 stl_brdnames[brdp->brdtype], brdp->brdnr,
2563 brdp->ioaddr1, brdp->irq);
2564 return(ENODEV);
2565 }
2566
2567 for (i = 0; (i < STL_MAXPANELS); i++)
2568 if (brdp->panels[i] != (stlpanel_t *) NULL)
2569 stl_initports(brdp, brdp->panels[i]);
2570
2571 printk("STALLION: %s found, board=%d io=%x irq=%d "
2572 "nrpanels=%d nrports=%d\n", stl_brdnames[brdp->brdtype],
2573 brdp->brdnr, brdp->ioaddr1, brdp->irq, brdp->nrpanels,
2574 brdp->nrports);
2575 return(0);
2576}
2577
2578/*****************************************************************************/
2579
2580/*
2581 * Find the next available board number that is free.
2582 */
2583
2584static inline int stl_getbrdnr(void)
2585{
2586 int i;
2587
2588 for (i = 0; (i < STL_MAXBRDS); i++) {
2589 if (stl_brds[i] == (stlbrd_t *) NULL) {
2590 if (i >= stl_nrbrds)
2591 stl_nrbrds = i + 1;
2592 return(i);
2593 }
2594 }
2595 return(-1);
2596}
2597
2598/*****************************************************************************/
2599
2600#ifdef CONFIG_PCI
2601
2602/*
2603 * We have a Stallion board. Allocate a board structure and
2604 * initialize it. Read its IO and IRQ resources from PCI
2605 * configuration space.
2606 */
2607
2608static inline int stl_initpcibrd(int brdtype, struct pci_dev *devp)
2609{
2610 stlbrd_t *brdp;
2611
2612#ifdef DEBUG
2613 printk("stl_initpcibrd(brdtype=%d,busnr=%x,devnr=%x)\n", brdtype,
2614 devp->bus->number, devp->devfn);
2615#endif
2616
2617 if (pci_enable_device(devp))
2618 return(-EIO);
2619 if ((brdp = stl_allocbrd()) == (stlbrd_t *) NULL)
2620 return(-ENOMEM);
2621 if ((brdp->brdnr = stl_getbrdnr()) < 0) {
2622 printk("STALLION: too many boards found, "
2623 "maximum supported %d\n", STL_MAXBRDS);
2624 return(0);
2625 }
2626 brdp->brdtype = brdtype;
2627
2628/*
2629 * Different Stallion boards use the BAR registers in different ways,
2630 * so set up io addresses based on board type.
2631 */
2632#ifdef DEBUG
2633 printk("%s(%d): BAR[]=%x,%x,%x,%x IRQ=%x\n", __FILE__, __LINE__,
2634 pci_resource_start(devp, 0), pci_resource_start(devp, 1),
2635 pci_resource_start(devp, 2), pci_resource_start(devp, 3), devp->irq);
2636#endif
2637
2638/*
2639 * We have all resources from the board, so let's setup the actual
2640 * board structure now.
2641 */
2642 switch (brdtype) {
2643 case BRD_ECHPCI:
2644 brdp->ioaddr2 = pci_resource_start(devp, 0);
2645 brdp->ioaddr1 = pci_resource_start(devp, 1);
2646 break;
2647 case BRD_ECH64PCI:
2648 brdp->ioaddr2 = pci_resource_start(devp, 2);
2649 brdp->ioaddr1 = pci_resource_start(devp, 1);
2650 break;
2651 case BRD_EASYIOPCI:
2652 brdp->ioaddr1 = pci_resource_start(devp, 2);
2653 brdp->ioaddr2 = pci_resource_start(devp, 1);
2654 break;
2655 default:
2656 printk("STALLION: unknown PCI board type=%d\n", brdtype);
2657 break;
2658 }
2659
2660 brdp->irq = devp->irq;
2661 stl_brdinit(brdp);
2662
2663 return(0);
2664}
2665
2666/*****************************************************************************/
2667
2668/*
2669 * Find all Stallion PCI boards that might be installed. Initialize each
2670 * one as it is found.
2671 */
2672
2673
2674static inline int stl_findpcibrds(void)
2675{
2676 struct pci_dev *dev = NULL;
2677 int i, rc;
2678
2679#ifdef DEBUG
2680 printk("stl_findpcibrds()\n");
2681#endif
2682
2683 for (i = 0; (i < stl_nrpcibrds); i++)
2684 while ((dev = pci_find_device(stl_pcibrds[i].vendid,
2685 stl_pcibrds[i].devid, dev))) {
2686
2687/*
2688 * Found a device on the PCI bus that has our vendor and
2689 * device ID. Need to check now that it is really us.
2690 */
2691 if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE)
2692 continue;
2693
2694 rc = stl_initpcibrd(stl_pcibrds[i].brdtype, dev);
2695 if (rc)
2696 return(rc);
2697 }
2698
2699 return(0);
2700}
2701
2702#endif
2703
2704/*****************************************************************************/
2705
2706/*
2707 * Scan through all the boards in the configuration and see what we
2708 * can find. Handle EIO and the ECH boards a little differently here
2709 * since the initial search and setup is too different.
2710 */
2711
2712static inline int stl_initbrds(void)
2713{
2714 stlbrd_t *brdp;
2715 stlconf_t *confp;
2716 int i;
2717
2718#ifdef DEBUG
2719 printk("stl_initbrds()\n");
2720#endif
2721
2722 if (stl_nrbrds > STL_MAXBRDS) {
2723 printk("STALLION: too many boards in configuration table, "
2724 "truncating to %d\n", STL_MAXBRDS);
2725 stl_nrbrds = STL_MAXBRDS;
2726 }
2727
2728/*
2729 * Firstly scan the list of static boards configured. Allocate
2730 * resources and initialize the boards as found.
2731 */
2732 for (i = 0; (i < stl_nrbrds); i++) {
2733 confp = &stl_brdconf[i];
2734 stl_parsebrd(confp, stl_brdsp[i]);
2735 if ((brdp = stl_allocbrd()) == (stlbrd_t *) NULL)
2736 return(-ENOMEM);
2737 brdp->brdnr = i;
2738 brdp->brdtype = confp->brdtype;
2739 brdp->ioaddr1 = confp->ioaddr1;
2740 brdp->ioaddr2 = confp->ioaddr2;
2741 brdp->irq = confp->irq;
2742 brdp->irqtype = confp->irqtype;
2743 stl_brdinit(brdp);
2744 }
2745
2746/*
2747 * Find any dynamically supported boards. That is via module load
2748 * line options or auto-detected on the PCI bus.
2749 */
2750 stl_argbrds();
2751#ifdef CONFIG_PCI
2752 stl_findpcibrds();
2753#endif
2754
2755 return(0);
2756}
2757
2758/*****************************************************************************/
2759
2760/*
2761 * Return the board stats structure to user app.
2762 */
2763
2764static int stl_getbrdstats(combrd_t __user *bp)
2765{
2766 stlbrd_t *brdp;
2767 stlpanel_t *panelp;
2768 int i;
2769
2770 if (copy_from_user(&stl_brdstats, bp, sizeof(combrd_t)))
2771 return -EFAULT;
2772 if (stl_brdstats.brd >= STL_MAXBRDS)
2773 return(-ENODEV);
2774 brdp = stl_brds[stl_brdstats.brd];
2775 if (brdp == (stlbrd_t *) NULL)
2776 return(-ENODEV);
2777
2778 memset(&stl_brdstats, 0, sizeof(combrd_t));
2779 stl_brdstats.brd = brdp->brdnr;
2780 stl_brdstats.type = brdp->brdtype;
2781 stl_brdstats.hwid = brdp->hwid;
2782 stl_brdstats.state = brdp->state;
2783 stl_brdstats.ioaddr = brdp->ioaddr1;
2784 stl_brdstats.ioaddr2 = brdp->ioaddr2;
2785 stl_brdstats.irq = brdp->irq;
2786 stl_brdstats.nrpanels = brdp->nrpanels;
2787 stl_brdstats.nrports = brdp->nrports;
2788 for (i = 0; (i < brdp->nrpanels); i++) {
2789 panelp = brdp->panels[i];
2790 stl_brdstats.panels[i].panel = i;
2791 stl_brdstats.panels[i].hwid = panelp->hwid;
2792 stl_brdstats.panels[i].nrports = panelp->nrports;
2793 }
2794
2795 return copy_to_user(bp, &stl_brdstats, sizeof(combrd_t)) ? -EFAULT : 0;
2796}
2797
2798/*****************************************************************************/
2799
2800/*
2801 * Resolve the referenced port number into a port struct pointer.
2802 */
2803
2804static stlport_t *stl_getport(int brdnr, int panelnr, int portnr)
2805{
2806 stlbrd_t *brdp;
2807 stlpanel_t *panelp;
2808
2809 if ((brdnr < 0) || (brdnr >= STL_MAXBRDS))
2810 return((stlport_t *) NULL);
2811 brdp = stl_brds[brdnr];
2812 if (brdp == (stlbrd_t *) NULL)
2813 return((stlport_t *) NULL);
2814 if ((panelnr < 0) || (panelnr >= brdp->nrpanels))
2815 return((stlport_t *) NULL);
2816 panelp = brdp->panels[panelnr];
2817 if (panelp == (stlpanel_t *) NULL)
2818 return((stlport_t *) NULL);
2819 if ((portnr < 0) || (portnr >= panelp->nrports))
2820 return((stlport_t *) NULL);
2821 return(panelp->ports[portnr]);
2822}
2823
2824/*****************************************************************************/
2825
2826/*
2827 * Return the port stats structure to user app. A NULL port struct
2828 * pointer passed in means that we need to find out from the app
2829 * what port to get stats for (used through board control device).
2830 */
2831
2832static int stl_getportstats(stlport_t *portp, comstats_t __user *cp)
2833{
2834 unsigned char *head, *tail;
2835 unsigned long flags;
2836
2837 if (!portp) {
2838 if (copy_from_user(&stl_comstats, cp, sizeof(comstats_t)))
2839 return -EFAULT;
2840 portp = stl_getport(stl_comstats.brd, stl_comstats.panel,
2841 stl_comstats.port);
2842 if (portp == (stlport_t *) NULL)
2843 return(-ENODEV);
2844 }
2845
2846 portp->stats.state = portp->istate;
2847 portp->stats.flags = portp->flags;
2848 portp->stats.hwid = portp->hwid;
2849
2850 portp->stats.ttystate = 0;
2851 portp->stats.cflags = 0;
2852 portp->stats.iflags = 0;
2853 portp->stats.oflags = 0;
2854 portp->stats.lflags = 0;
2855 portp->stats.rxbuffered = 0;
2856
Alan Coxb65b5b52006-06-27 02:54:05 -07002857 spin_lock_irqsave(&stallion_lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002858 if (portp->tty != (struct tty_struct *) NULL) {
2859 if (portp->tty->driver_data == portp) {
2860 portp->stats.ttystate = portp->tty->flags;
Alan Cox33f0f882006-01-09 20:54:13 -08002861 /* No longer available as a statistic */
2862 portp->stats.rxbuffered = 1; /*portp->tty->flip.count; */
Linus Torvalds1da177e2005-04-16 15:20:36 -07002863 if (portp->tty->termios != (struct termios *) NULL) {
2864 portp->stats.cflags = portp->tty->termios->c_cflag;
2865 portp->stats.iflags = portp->tty->termios->c_iflag;
2866 portp->stats.oflags = portp->tty->termios->c_oflag;
2867 portp->stats.lflags = portp->tty->termios->c_lflag;
2868 }
2869 }
2870 }
Alan Coxb65b5b52006-06-27 02:54:05 -07002871 spin_unlock_irqrestore(&stallion_lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002872
2873 head = portp->tx.head;
2874 tail = portp->tx.tail;
2875 portp->stats.txbuffered = ((head >= tail) ? (head - tail) :
2876 (STL_TXBUFSIZE - (tail - head)));
2877
2878 portp->stats.signals = (unsigned long) stl_getsignals(portp);
2879
2880 return copy_to_user(cp, &portp->stats,
2881 sizeof(comstats_t)) ? -EFAULT : 0;
2882}
2883
2884/*****************************************************************************/
2885
2886/*
2887 * Clear the port stats structure. We also return it zeroed out...
2888 */
2889
2890static int stl_clrportstats(stlport_t *portp, comstats_t __user *cp)
2891{
2892 if (!portp) {
2893 if (copy_from_user(&stl_comstats, cp, sizeof(comstats_t)))
2894 return -EFAULT;
2895 portp = stl_getport(stl_comstats.brd, stl_comstats.panel,
2896 stl_comstats.port);
2897 if (portp == (stlport_t *) NULL)
2898 return(-ENODEV);
2899 }
2900
2901 memset(&portp->stats, 0, sizeof(comstats_t));
2902 portp->stats.brd = portp->brdnr;
2903 portp->stats.panel = portp->panelnr;
2904 portp->stats.port = portp->portnr;
2905 return copy_to_user(cp, &portp->stats,
2906 sizeof(comstats_t)) ? -EFAULT : 0;
2907}
2908
2909/*****************************************************************************/
2910
2911/*
2912 * Return the entire driver ports structure to a user app.
2913 */
2914
2915static int stl_getportstruct(stlport_t __user *arg)
2916{
2917 stlport_t *portp;
2918
2919 if (copy_from_user(&stl_dummyport, arg, sizeof(stlport_t)))
2920 return -EFAULT;
2921 portp = stl_getport(stl_dummyport.brdnr, stl_dummyport.panelnr,
2922 stl_dummyport.portnr);
2923 if (!portp)
2924 return -ENODEV;
2925 return copy_to_user(arg, portp, sizeof(stlport_t)) ? -EFAULT : 0;
2926}
2927
2928/*****************************************************************************/
2929
2930/*
2931 * Return the entire driver board structure to a user app.
2932 */
2933
2934static int stl_getbrdstruct(stlbrd_t __user *arg)
2935{
2936 stlbrd_t *brdp;
2937
2938 if (copy_from_user(&stl_dummybrd, arg, sizeof(stlbrd_t)))
2939 return -EFAULT;
2940 if ((stl_dummybrd.brdnr < 0) || (stl_dummybrd.brdnr >= STL_MAXBRDS))
2941 return -ENODEV;
2942 brdp = stl_brds[stl_dummybrd.brdnr];
2943 if (!brdp)
2944 return(-ENODEV);
2945 return copy_to_user(arg, brdp, sizeof(stlbrd_t)) ? -EFAULT : 0;
2946}
2947
2948/*****************************************************************************/
2949
2950/*
2951 * The "staliomem" device is also required to do some special operations
2952 * on the board and/or ports. In this driver it is mostly used for stats
2953 * collection.
2954 */
2955
2956static int stl_memioctl(struct inode *ip, struct file *fp, unsigned int cmd, unsigned long arg)
2957{
2958 int brdnr, rc;
2959 void __user *argp = (void __user *)arg;
2960
2961#ifdef DEBUG
2962 printk("stl_memioctl(ip=%x,fp=%x,cmd=%x,arg=%x)\n", (int) ip,
2963 (int) fp, cmd, (int) arg);
2964#endif
2965
2966 brdnr = iminor(ip);
2967 if (brdnr >= STL_MAXBRDS)
2968 return(-ENODEV);
2969 rc = 0;
2970
2971 switch (cmd) {
2972 case COM_GETPORTSTATS:
2973 rc = stl_getportstats(NULL, argp);
2974 break;
2975 case COM_CLRPORTSTATS:
2976 rc = stl_clrportstats(NULL, argp);
2977 break;
2978 case COM_GETBRDSTATS:
2979 rc = stl_getbrdstats(argp);
2980 break;
2981 case COM_READPORT:
2982 rc = stl_getportstruct(argp);
2983 break;
2984 case COM_READBOARD:
2985 rc = stl_getbrdstruct(argp);
2986 break;
2987 default:
2988 rc = -ENOIOCTLCMD;
2989 break;
2990 }
2991
2992 return(rc);
2993}
2994
Jeff Dikeb68e31d2006-10-02 02:17:18 -07002995static const struct tty_operations stl_ops = {
Linus Torvalds1da177e2005-04-16 15:20:36 -07002996 .open = stl_open,
2997 .close = stl_close,
2998 .write = stl_write,
2999 .put_char = stl_putchar,
3000 .flush_chars = stl_flushchars,
3001 .write_room = stl_writeroom,
3002 .chars_in_buffer = stl_charsinbuffer,
3003 .ioctl = stl_ioctl,
3004 .set_termios = stl_settermios,
3005 .throttle = stl_throttle,
3006 .unthrottle = stl_unthrottle,
3007 .stop = stl_stop,
3008 .start = stl_start,
3009 .hangup = stl_hangup,
3010 .flush_buffer = stl_flushbuffer,
3011 .break_ctl = stl_breakctl,
3012 .wait_until_sent = stl_waituntilsent,
3013 .send_xchar = stl_sendxchar,
3014 .read_proc = stl_readproc,
3015 .tiocmget = stl_tiocmget,
3016 .tiocmset = stl_tiocmset,
3017};
3018
3019/*****************************************************************************/
3020
Adrian Bunk408b6642005-05-01 08:59:29 -07003021static int __init stl_init(void)
Linus Torvalds1da177e2005-04-16 15:20:36 -07003022{
3023 int i;
3024 printk(KERN_INFO "%s: version %s\n", stl_drvtitle, stl_drvversion);
3025
Alan Coxeffc8b72006-06-28 04:26:51 -07003026 spin_lock_init(&stallion_lock);
3027 spin_lock_init(&brd_lock);
3028
Linus Torvalds1da177e2005-04-16 15:20:36 -07003029 stl_initbrds();
3030
3031 stl_serial = alloc_tty_driver(STL_MAXBRDS * STL_MAXPORTS);
3032 if (!stl_serial)
3033 return -1;
3034
3035/*
Linus Torvalds1da177e2005-04-16 15:20:36 -07003036 * Set up a character driver for per board stuff. This is mainly used
3037 * to do stats ioctls on the ports.
3038 */
3039 if (register_chrdev(STL_SIOMEMMAJOR, "staliomem", &stl_fsiomem))
3040 printk("STALLION: failed to register serial board device\n");
Linus Torvalds1da177e2005-04-16 15:20:36 -07003041
gregkh@suse.deca8eca62005-03-23 09:53:09 -08003042 stallion_class = class_create(THIS_MODULE, "staliomem");
Greg Kroah-Hartman7c69ef72005-06-20 21:15:16 -07003043 for (i = 0; i < 4; i++)
Greg Kroah-Hartman53f46542005-10-27 22:25:43 -07003044 class_device_create(stallion_class, NULL,
3045 MKDEV(STL_SIOMEMMAJOR, i), NULL,
3046 "staliomem%d", i);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003047
3048 stl_serial->owner = THIS_MODULE;
3049 stl_serial->driver_name = stl_drvname;
3050 stl_serial->name = "ttyE";
Linus Torvalds1da177e2005-04-16 15:20:36 -07003051 stl_serial->major = STL_SERIALMAJOR;
3052 stl_serial->minor_start = 0;
3053 stl_serial->type = TTY_DRIVER_TYPE_SERIAL;
3054 stl_serial->subtype = SERIAL_TYPE_NORMAL;
3055 stl_serial->init_termios = stl_deftermios;
3056 stl_serial->flags = TTY_DRIVER_REAL_RAW;
3057 tty_set_operations(stl_serial, &stl_ops);
3058
3059 if (tty_register_driver(stl_serial)) {
3060 put_tty_driver(stl_serial);
3061 printk("STALLION: failed to register serial driver\n");
3062 return -1;
3063 }
3064
Jesper Juhl014c2542006-01-15 02:37:08 +01003065 return 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003066}
3067
3068/*****************************************************************************/
3069/* CD1400 HARDWARE FUNCTIONS */
3070/*****************************************************************************/
3071
3072/*
3073 * These functions get/set/update the registers of the cd1400 UARTs.
3074 * Access to the cd1400 registers is via an address/data io port pair.
3075 * (Maybe should make this inline...)
3076 */
3077
3078static int stl_cd1400getreg(stlport_t *portp, int regnr)
3079{
3080 outb((regnr + portp->uartaddr), portp->ioaddr);
Jesper Juhl014c2542006-01-15 02:37:08 +01003081 return inb(portp->ioaddr + EREG_DATA);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003082}
3083
3084static void stl_cd1400setreg(stlport_t *portp, int regnr, int value)
3085{
3086 outb((regnr + portp->uartaddr), portp->ioaddr);
3087 outb(value, portp->ioaddr + EREG_DATA);
3088}
3089
3090static int stl_cd1400updatereg(stlport_t *portp, int regnr, int value)
3091{
3092 outb((regnr + portp->uartaddr), portp->ioaddr);
3093 if (inb(portp->ioaddr + EREG_DATA) != value) {
3094 outb(value, portp->ioaddr + EREG_DATA);
Jesper Juhl014c2542006-01-15 02:37:08 +01003095 return 1;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003096 }
Jesper Juhl014c2542006-01-15 02:37:08 +01003097 return 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003098}
3099
3100/*****************************************************************************/
3101
3102/*
3103 * Inbitialize the UARTs in a panel. We don't care what sort of board
3104 * these ports are on - since the port io registers are almost
3105 * identical when dealing with ports.
3106 */
3107
3108static int stl_cd1400panelinit(stlbrd_t *brdp, stlpanel_t *panelp)
3109{
3110 unsigned int gfrcr;
3111 int chipmask, i, j;
3112 int nrchips, uartaddr, ioaddr;
Alan Coxb65b5b52006-06-27 02:54:05 -07003113 unsigned long flags;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003114
3115#ifdef DEBUG
3116 printk("stl_panelinit(brdp=%x,panelp=%x)\n", (int) brdp, (int) panelp);
3117#endif
3118
Alan Coxb65b5b52006-06-27 02:54:05 -07003119 spin_lock_irqsave(&brd_lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003120 BRDENABLE(panelp->brdnr, panelp->pagenr);
3121
3122/*
3123 * Check that each chip is present and started up OK.
3124 */
3125 chipmask = 0;
3126 nrchips = panelp->nrports / CD1400_PORTS;
3127 for (i = 0; (i < nrchips); i++) {
3128 if (brdp->brdtype == BRD_ECHPCI) {
3129 outb((panelp->pagenr + (i >> 1)), brdp->ioctrl);
3130 ioaddr = panelp->iobase;
3131 } else {
3132 ioaddr = panelp->iobase + (EREG_BANKSIZE * (i >> 1));
3133 }
3134 uartaddr = (i & 0x01) ? 0x080 : 0;
3135 outb((GFRCR + uartaddr), ioaddr);
3136 outb(0, (ioaddr + EREG_DATA));
3137 outb((CCR + uartaddr), ioaddr);
3138 outb(CCR_RESETFULL, (ioaddr + EREG_DATA));
3139 outb(CCR_RESETFULL, (ioaddr + EREG_DATA));
3140 outb((GFRCR + uartaddr), ioaddr);
3141 for (j = 0; (j < CCR_MAXWAIT); j++) {
3142 if ((gfrcr = inb(ioaddr + EREG_DATA)) != 0)
3143 break;
3144 }
3145 if ((j >= CCR_MAXWAIT) || (gfrcr < 0x40) || (gfrcr > 0x60)) {
3146 printk("STALLION: cd1400 not responding, "
3147 "brd=%d panel=%d chip=%d\n",
3148 panelp->brdnr, panelp->panelnr, i);
3149 continue;
3150 }
3151 chipmask |= (0x1 << i);
3152 outb((PPR + uartaddr), ioaddr);
3153 outb(PPR_SCALAR, (ioaddr + EREG_DATA));
3154 }
3155
3156 BRDDISABLE(panelp->brdnr);
Alan Coxb65b5b52006-06-27 02:54:05 -07003157 spin_unlock_irqrestore(&brd_lock, flags);
Jesper Juhl014c2542006-01-15 02:37:08 +01003158 return chipmask;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003159}
3160
3161/*****************************************************************************/
3162
3163/*
3164 * Initialize hardware specific port registers.
3165 */
3166
3167static void stl_cd1400portinit(stlbrd_t *brdp, stlpanel_t *panelp, stlport_t *portp)
3168{
Alan Coxb65b5b52006-06-27 02:54:05 -07003169 unsigned long flags;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003170#ifdef DEBUG
3171 printk("stl_cd1400portinit(brdp=%x,panelp=%x,portp=%x)\n",
3172 (int) brdp, (int) panelp, (int) portp);
3173#endif
3174
3175 if ((brdp == (stlbrd_t *) NULL) || (panelp == (stlpanel_t *) NULL) ||
3176 (portp == (stlport_t *) NULL))
3177 return;
3178
Alan Coxb65b5b52006-06-27 02:54:05 -07003179 spin_lock_irqsave(&brd_lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003180 portp->ioaddr = panelp->iobase + (((brdp->brdtype == BRD_ECHPCI) ||
3181 (portp->portnr < 8)) ? 0 : EREG_BANKSIZE);
3182 portp->uartaddr = (portp->portnr & 0x04) << 5;
3183 portp->pagenr = panelp->pagenr + (portp->portnr >> 3);
3184
3185 BRDENABLE(portp->brdnr, portp->pagenr);
3186 stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03));
3187 stl_cd1400setreg(portp, LIVR, (portp->portnr << 3));
3188 portp->hwid = stl_cd1400getreg(portp, GFRCR);
3189 BRDDISABLE(portp->brdnr);
Alan Coxb65b5b52006-06-27 02:54:05 -07003190 spin_unlock_irqrestore(&brd_lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003191}
3192
3193/*****************************************************************************/
3194
3195/*
3196 * Wait for the command register to be ready. We will poll this,
3197 * since it won't usually take too long to be ready.
3198 */
3199
3200static void stl_cd1400ccrwait(stlport_t *portp)
3201{
3202 int i;
3203
3204 for (i = 0; (i < CCR_MAXWAIT); i++) {
3205 if (stl_cd1400getreg(portp, CCR) == 0) {
3206 return;
3207 }
3208 }
3209
3210 printk("STALLION: cd1400 not responding, port=%d panel=%d brd=%d\n",
3211 portp->portnr, portp->panelnr, portp->brdnr);
3212}
3213
3214/*****************************************************************************/
3215
3216/*
3217 * Set up the cd1400 registers for a port based on the termios port
3218 * settings.
3219 */
3220
3221static void stl_cd1400setport(stlport_t *portp, struct termios *tiosp)
3222{
3223 stlbrd_t *brdp;
3224 unsigned long flags;
3225 unsigned int clkdiv, baudrate;
3226 unsigned char cor1, cor2, cor3;
3227 unsigned char cor4, cor5, ccr;
3228 unsigned char srer, sreron, sreroff;
3229 unsigned char mcor1, mcor2, rtpr;
3230 unsigned char clk, div;
3231
3232 cor1 = 0;
3233 cor2 = 0;
3234 cor3 = 0;
3235 cor4 = 0;
3236 cor5 = 0;
3237 ccr = 0;
3238 rtpr = 0;
3239 clk = 0;
3240 div = 0;
3241 mcor1 = 0;
3242 mcor2 = 0;
3243 sreron = 0;
3244 sreroff = 0;
3245
3246 brdp = stl_brds[portp->brdnr];
3247 if (brdp == (stlbrd_t *) NULL)
3248 return;
3249
3250/*
3251 * Set up the RX char ignore mask with those RX error types we
3252 * can ignore. We can get the cd1400 to help us out a little here,
3253 * it will ignore parity errors and breaks for us.
3254 */
3255 portp->rxignoremsk = 0;
3256 if (tiosp->c_iflag & IGNPAR) {
3257 portp->rxignoremsk |= (ST_PARITY | ST_FRAMING | ST_OVERRUN);
3258 cor1 |= COR1_PARIGNORE;
3259 }
3260 if (tiosp->c_iflag & IGNBRK) {
3261 portp->rxignoremsk |= ST_BREAK;
3262 cor4 |= COR4_IGNBRK;
3263 }
3264
3265 portp->rxmarkmsk = ST_OVERRUN;
3266 if (tiosp->c_iflag & (INPCK | PARMRK))
3267 portp->rxmarkmsk |= (ST_PARITY | ST_FRAMING);
3268 if (tiosp->c_iflag & BRKINT)
3269 portp->rxmarkmsk |= ST_BREAK;
3270
3271/*
3272 * Go through the char size, parity and stop bits and set all the
3273 * option register appropriately.
3274 */
3275 switch (tiosp->c_cflag & CSIZE) {
3276 case CS5:
3277 cor1 |= COR1_CHL5;
3278 break;
3279 case CS6:
3280 cor1 |= COR1_CHL6;
3281 break;
3282 case CS7:
3283 cor1 |= COR1_CHL7;
3284 break;
3285 default:
3286 cor1 |= COR1_CHL8;
3287 break;
3288 }
3289
3290 if (tiosp->c_cflag & CSTOPB)
3291 cor1 |= COR1_STOP2;
3292 else
3293 cor1 |= COR1_STOP1;
3294
3295 if (tiosp->c_cflag & PARENB) {
3296 if (tiosp->c_cflag & PARODD)
3297 cor1 |= (COR1_PARENB | COR1_PARODD);
3298 else
3299 cor1 |= (COR1_PARENB | COR1_PAREVEN);
3300 } else {
3301 cor1 |= COR1_PARNONE;
3302 }
3303
3304/*
3305 * Set the RX FIFO threshold at 6 chars. This gives a bit of breathing
3306 * space for hardware flow control and the like. This should be set to
3307 * VMIN. Also here we will set the RX data timeout to 10ms - this should
3308 * really be based on VTIME.
3309 */
3310 cor3 |= FIFO_RXTHRESHOLD;
3311 rtpr = 2;
3312
3313/*
3314 * Calculate the baud rate timers. For now we will just assume that
3315 * the input and output baud are the same. Could have used a baud
3316 * table here, but this way we can generate virtually any baud rate
3317 * we like!
3318 */
3319 baudrate = tiosp->c_cflag & CBAUD;
3320 if (baudrate & CBAUDEX) {
3321 baudrate &= ~CBAUDEX;
3322 if ((baudrate < 1) || (baudrate > 4))
3323 tiosp->c_cflag &= ~CBAUDEX;
3324 else
3325 baudrate += 15;
3326 }
3327 baudrate = stl_baudrates[baudrate];
3328 if ((tiosp->c_cflag & CBAUD) == B38400) {
3329 if ((portp->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
3330 baudrate = 57600;
3331 else if ((portp->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
3332 baudrate = 115200;
3333 else if ((portp->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
3334 baudrate = 230400;
3335 else if ((portp->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
3336 baudrate = 460800;
3337 else if ((portp->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST)
3338 baudrate = (portp->baud_base / portp->custom_divisor);
3339 }
3340 if (baudrate > STL_CD1400MAXBAUD)
3341 baudrate = STL_CD1400MAXBAUD;
3342
3343 if (baudrate > 0) {
3344 for (clk = 0; (clk < CD1400_NUMCLKS); clk++) {
3345 clkdiv = ((portp->clk / stl_cd1400clkdivs[clk]) / baudrate);
3346 if (clkdiv < 0x100)
3347 break;
3348 }
3349 div = (unsigned char) clkdiv;
3350 }
3351
3352/*
3353 * Check what form of modem signaling is required and set it up.
3354 */
3355 if ((tiosp->c_cflag & CLOCAL) == 0) {
3356 mcor1 |= MCOR1_DCD;
3357 mcor2 |= MCOR2_DCD;
3358 sreron |= SRER_MODEM;
3359 portp->flags |= ASYNC_CHECK_CD;
3360 } else {
3361 portp->flags &= ~ASYNC_CHECK_CD;
3362 }
3363
3364/*
3365 * Setup cd1400 enhanced modes if we can. In particular we want to
3366 * handle as much of the flow control as possible automatically. As
3367 * well as saving a few CPU cycles it will also greatly improve flow
3368 * control reliability.
3369 */
3370 if (tiosp->c_iflag & IXON) {
3371 cor2 |= COR2_TXIBE;
3372 cor3 |= COR3_SCD12;
3373 if (tiosp->c_iflag & IXANY)
3374 cor2 |= COR2_IXM;
3375 }
3376
3377 if (tiosp->c_cflag & CRTSCTS) {
3378 cor2 |= COR2_CTSAE;
3379 mcor1 |= FIFO_RTSTHRESHOLD;
3380 }
3381
3382/*
3383 * All cd1400 register values calculated so go through and set
3384 * them all up.
3385 */
3386
3387#ifdef DEBUG
3388 printk("SETPORT: portnr=%d panelnr=%d brdnr=%d\n",
3389 portp->portnr, portp->panelnr, portp->brdnr);
3390 printk(" cor1=%x cor2=%x cor3=%x cor4=%x cor5=%x\n",
3391 cor1, cor2, cor3, cor4, cor5);
3392 printk(" mcor1=%x mcor2=%x rtpr=%x sreron=%x sreroff=%x\n",
3393 mcor1, mcor2, rtpr, sreron, sreroff);
3394 printk(" tcor=%x tbpr=%x rcor=%x rbpr=%x\n", clk, div, clk, div);
3395 printk(" schr1=%x schr2=%x schr3=%x schr4=%x\n",
3396 tiosp->c_cc[VSTART], tiosp->c_cc[VSTOP],
3397 tiosp->c_cc[VSTART], tiosp->c_cc[VSTOP]);
3398#endif
3399
Alan Coxb65b5b52006-06-27 02:54:05 -07003400 spin_lock_irqsave(&brd_lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003401 BRDENABLE(portp->brdnr, portp->pagenr);
3402 stl_cd1400setreg(portp, CAR, (portp->portnr & 0x3));
3403 srer = stl_cd1400getreg(portp, SRER);
3404 stl_cd1400setreg(portp, SRER, 0);
3405 if (stl_cd1400updatereg(portp, COR1, cor1))
3406 ccr = 1;
3407 if (stl_cd1400updatereg(portp, COR2, cor2))
3408 ccr = 1;
3409 if (stl_cd1400updatereg(portp, COR3, cor3))
3410 ccr = 1;
3411 if (ccr) {
3412 stl_cd1400ccrwait(portp);
3413 stl_cd1400setreg(portp, CCR, CCR_CORCHANGE);
3414 }
3415 stl_cd1400setreg(portp, COR4, cor4);
3416 stl_cd1400setreg(portp, COR5, cor5);
3417 stl_cd1400setreg(portp, MCOR1, mcor1);
3418 stl_cd1400setreg(portp, MCOR2, mcor2);
3419 if (baudrate > 0) {
3420 stl_cd1400setreg(portp, TCOR, clk);
3421 stl_cd1400setreg(portp, TBPR, div);
3422 stl_cd1400setreg(portp, RCOR, clk);
3423 stl_cd1400setreg(portp, RBPR, div);
3424 }
3425 stl_cd1400setreg(portp, SCHR1, tiosp->c_cc[VSTART]);
3426 stl_cd1400setreg(portp, SCHR2, tiosp->c_cc[VSTOP]);
3427 stl_cd1400setreg(portp, SCHR3, tiosp->c_cc[VSTART]);
3428 stl_cd1400setreg(portp, SCHR4, tiosp->c_cc[VSTOP]);
3429 stl_cd1400setreg(portp, RTPR, rtpr);
3430 mcor1 = stl_cd1400getreg(portp, MSVR1);
3431 if (mcor1 & MSVR1_DCD)
3432 portp->sigs |= TIOCM_CD;
3433 else
3434 portp->sigs &= ~TIOCM_CD;
3435 stl_cd1400setreg(portp, SRER, ((srer & ~sreroff) | sreron));
3436 BRDDISABLE(portp->brdnr);
Alan Coxb65b5b52006-06-27 02:54:05 -07003437 spin_unlock_irqrestore(&brd_lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003438}
3439
3440/*****************************************************************************/
3441
3442/*
3443 * Set the state of the DTR and RTS signals.
3444 */
3445
3446static void stl_cd1400setsignals(stlport_t *portp, int dtr, int rts)
3447{
3448 unsigned char msvr1, msvr2;
3449 unsigned long flags;
3450
3451#ifdef DEBUG
3452 printk("stl_cd1400setsignals(portp=%x,dtr=%d,rts=%d)\n",
3453 (int) portp, dtr, rts);
3454#endif
3455
3456 msvr1 = 0;
3457 msvr2 = 0;
3458 if (dtr > 0)
3459 msvr1 = MSVR1_DTR;
3460 if (rts > 0)
3461 msvr2 = MSVR2_RTS;
3462
Alan Coxb65b5b52006-06-27 02:54:05 -07003463 spin_lock_irqsave(&brd_lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003464 BRDENABLE(portp->brdnr, portp->pagenr);
3465 stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03));
3466 if (rts >= 0)
3467 stl_cd1400setreg(portp, MSVR2, msvr2);
3468 if (dtr >= 0)
3469 stl_cd1400setreg(portp, MSVR1, msvr1);
3470 BRDDISABLE(portp->brdnr);
Alan Coxb65b5b52006-06-27 02:54:05 -07003471 spin_unlock_irqrestore(&brd_lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003472}
3473
3474/*****************************************************************************/
3475
3476/*
3477 * Return the state of the signals.
3478 */
3479
3480static int stl_cd1400getsignals(stlport_t *portp)
3481{
3482 unsigned char msvr1, msvr2;
3483 unsigned long flags;
3484 int sigs;
3485
3486#ifdef DEBUG
3487 printk("stl_cd1400getsignals(portp=%x)\n", (int) portp);
3488#endif
3489
Alan Coxb65b5b52006-06-27 02:54:05 -07003490 spin_lock_irqsave(&brd_lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003491 BRDENABLE(portp->brdnr, portp->pagenr);
3492 stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03));
3493 msvr1 = stl_cd1400getreg(portp, MSVR1);
3494 msvr2 = stl_cd1400getreg(portp, MSVR2);
3495 BRDDISABLE(portp->brdnr);
Alan Coxb65b5b52006-06-27 02:54:05 -07003496 spin_unlock_irqrestore(&brd_lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003497
3498 sigs = 0;
3499 sigs |= (msvr1 & MSVR1_DCD) ? TIOCM_CD : 0;
3500 sigs |= (msvr1 & MSVR1_CTS) ? TIOCM_CTS : 0;
3501 sigs |= (msvr1 & MSVR1_DTR) ? TIOCM_DTR : 0;
3502 sigs |= (msvr2 & MSVR2_RTS) ? TIOCM_RTS : 0;
3503#if 0
3504 sigs |= (msvr1 & MSVR1_RI) ? TIOCM_RI : 0;
3505 sigs |= (msvr1 & MSVR1_DSR) ? TIOCM_DSR : 0;
3506#else
3507 sigs |= TIOCM_DSR;
3508#endif
Jesper Juhl014c2542006-01-15 02:37:08 +01003509 return sigs;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003510}
3511
3512/*****************************************************************************/
3513
3514/*
3515 * Enable/Disable the Transmitter and/or Receiver.
3516 */
3517
3518static void stl_cd1400enablerxtx(stlport_t *portp, int rx, int tx)
3519{
3520 unsigned char ccr;
3521 unsigned long flags;
3522
3523#ifdef DEBUG
3524 printk("stl_cd1400enablerxtx(portp=%x,rx=%d,tx=%d)\n",
3525 (int) portp, rx, tx);
3526#endif
3527 ccr = 0;
3528
3529 if (tx == 0)
3530 ccr |= CCR_TXDISABLE;
3531 else if (tx > 0)
3532 ccr |= CCR_TXENABLE;
3533 if (rx == 0)
3534 ccr |= CCR_RXDISABLE;
3535 else if (rx > 0)
3536 ccr |= CCR_RXENABLE;
3537
Alan Coxb65b5b52006-06-27 02:54:05 -07003538 spin_lock_irqsave(&brd_lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003539 BRDENABLE(portp->brdnr, portp->pagenr);
3540 stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03));
3541 stl_cd1400ccrwait(portp);
3542 stl_cd1400setreg(portp, CCR, ccr);
3543 stl_cd1400ccrwait(portp);
3544 BRDDISABLE(portp->brdnr);
Alan Coxb65b5b52006-06-27 02:54:05 -07003545 spin_unlock_irqrestore(&brd_lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003546}
3547
3548/*****************************************************************************/
3549
3550/*
3551 * Start/stop the Transmitter and/or Receiver.
3552 */
3553
3554static void stl_cd1400startrxtx(stlport_t *portp, int rx, int tx)
3555{
3556 unsigned char sreron, sreroff;
3557 unsigned long flags;
3558
3559#ifdef DEBUG
3560 printk("stl_cd1400startrxtx(portp=%x,rx=%d,tx=%d)\n",
3561 (int) portp, rx, tx);
3562#endif
3563
3564 sreron = 0;
3565 sreroff = 0;
3566 if (tx == 0)
3567 sreroff |= (SRER_TXDATA | SRER_TXEMPTY);
3568 else if (tx == 1)
3569 sreron |= SRER_TXDATA;
3570 else if (tx >= 2)
3571 sreron |= SRER_TXEMPTY;
3572 if (rx == 0)
3573 sreroff |= SRER_RXDATA;
3574 else if (rx > 0)
3575 sreron |= SRER_RXDATA;
3576
Alan Coxb65b5b52006-06-27 02:54:05 -07003577 spin_lock_irqsave(&brd_lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003578 BRDENABLE(portp->brdnr, portp->pagenr);
3579 stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03));
3580 stl_cd1400setreg(portp, SRER,
3581 ((stl_cd1400getreg(portp, SRER) & ~sreroff) | sreron));
3582 BRDDISABLE(portp->brdnr);
3583 if (tx > 0)
3584 set_bit(ASYI_TXBUSY, &portp->istate);
Alan Coxb65b5b52006-06-27 02:54:05 -07003585 spin_unlock_irqrestore(&brd_lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003586}
3587
3588/*****************************************************************************/
3589
3590/*
3591 * Disable all interrupts from this port.
3592 */
3593
3594static void stl_cd1400disableintrs(stlport_t *portp)
3595{
3596 unsigned long flags;
3597
3598#ifdef DEBUG
3599 printk("stl_cd1400disableintrs(portp=%x)\n", (int) portp);
3600#endif
Alan Coxb65b5b52006-06-27 02:54:05 -07003601 spin_lock_irqsave(&brd_lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003602 BRDENABLE(portp->brdnr, portp->pagenr);
3603 stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03));
3604 stl_cd1400setreg(portp, SRER, 0);
3605 BRDDISABLE(portp->brdnr);
Alan Coxb65b5b52006-06-27 02:54:05 -07003606 spin_unlock_irqrestore(&brd_lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003607}
3608
3609/*****************************************************************************/
3610
3611static void stl_cd1400sendbreak(stlport_t *portp, int len)
3612{
3613 unsigned long flags;
3614
3615#ifdef DEBUG
3616 printk("stl_cd1400sendbreak(portp=%x,len=%d)\n", (int) portp, len);
3617#endif
3618
Alan Coxb65b5b52006-06-27 02:54:05 -07003619 spin_lock_irqsave(&brd_lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003620 BRDENABLE(portp->brdnr, portp->pagenr);
3621 stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03));
3622 stl_cd1400setreg(portp, SRER,
3623 ((stl_cd1400getreg(portp, SRER) & ~SRER_TXDATA) |
3624 SRER_TXEMPTY));
3625 BRDDISABLE(portp->brdnr);
3626 portp->brklen = len;
3627 if (len == 1)
3628 portp->stats.txbreaks++;
Alan Coxb65b5b52006-06-27 02:54:05 -07003629 spin_unlock_irqrestore(&brd_lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003630}
3631
3632/*****************************************************************************/
3633
3634/*
3635 * Take flow control actions...
3636 */
3637
3638static void stl_cd1400flowctrl(stlport_t *portp, int state)
3639{
3640 struct tty_struct *tty;
3641 unsigned long flags;
3642
3643#ifdef DEBUG
3644 printk("stl_cd1400flowctrl(portp=%x,state=%x)\n", (int) portp, state);
3645#endif
3646
3647 if (portp == (stlport_t *) NULL)
3648 return;
3649 tty = portp->tty;
3650 if (tty == (struct tty_struct *) NULL)
3651 return;
3652
Alan Coxb65b5b52006-06-27 02:54:05 -07003653 spin_lock_irqsave(&brd_lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003654 BRDENABLE(portp->brdnr, portp->pagenr);
3655 stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03));
3656
3657 if (state) {
3658 if (tty->termios->c_iflag & IXOFF) {
3659 stl_cd1400ccrwait(portp);
3660 stl_cd1400setreg(portp, CCR, CCR_SENDSCHR1);
3661 portp->stats.rxxon++;
3662 stl_cd1400ccrwait(portp);
3663 }
3664/*
3665 * Question: should we return RTS to what it was before? It may
3666 * have been set by an ioctl... Suppose not, since if you have
3667 * hardware flow control set then it is pretty silly to go and
3668 * set the RTS line by hand.
3669 */
3670 if (tty->termios->c_cflag & CRTSCTS) {
3671 stl_cd1400setreg(portp, MCOR1,
3672 (stl_cd1400getreg(portp, MCOR1) |
3673 FIFO_RTSTHRESHOLD));
3674 stl_cd1400setreg(portp, MSVR2, MSVR2_RTS);
3675 portp->stats.rxrtson++;
3676 }
3677 } else {
3678 if (tty->termios->c_iflag & IXOFF) {
3679 stl_cd1400ccrwait(portp);
3680 stl_cd1400setreg(portp, CCR, CCR_SENDSCHR2);
3681 portp->stats.rxxoff++;
3682 stl_cd1400ccrwait(portp);
3683 }
3684 if (tty->termios->c_cflag & CRTSCTS) {
3685 stl_cd1400setreg(portp, MCOR1,
3686 (stl_cd1400getreg(portp, MCOR1) & 0xf0));
3687 stl_cd1400setreg(portp, MSVR2, 0);
3688 portp->stats.rxrtsoff++;
3689 }
3690 }
3691
3692 BRDDISABLE(portp->brdnr);
Alan Coxb65b5b52006-06-27 02:54:05 -07003693 spin_unlock_irqrestore(&brd_lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003694}
3695
3696/*****************************************************************************/
3697
3698/*
3699 * Send a flow control character...
3700 */
3701
3702static void stl_cd1400sendflow(stlport_t *portp, int state)
3703{
3704 struct tty_struct *tty;
3705 unsigned long flags;
3706
3707#ifdef DEBUG
3708 printk("stl_cd1400sendflow(portp=%x,state=%x)\n", (int) portp, state);
3709#endif
3710
3711 if (portp == (stlport_t *) NULL)
3712 return;
3713 tty = portp->tty;
3714 if (tty == (struct tty_struct *) NULL)
3715 return;
3716
Alan Coxb65b5b52006-06-27 02:54:05 -07003717 spin_lock_irqsave(&brd_lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003718 BRDENABLE(portp->brdnr, portp->pagenr);
3719 stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03));
3720 if (state) {
3721 stl_cd1400ccrwait(portp);
3722 stl_cd1400setreg(portp, CCR, CCR_SENDSCHR1);
3723 portp->stats.rxxon++;
3724 stl_cd1400ccrwait(portp);
3725 } else {
3726 stl_cd1400ccrwait(portp);
3727 stl_cd1400setreg(portp, CCR, CCR_SENDSCHR2);
3728 portp->stats.rxxoff++;
3729 stl_cd1400ccrwait(portp);
3730 }
3731 BRDDISABLE(portp->brdnr);
Alan Coxb65b5b52006-06-27 02:54:05 -07003732 spin_unlock_irqrestore(&brd_lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003733}
3734
3735/*****************************************************************************/
3736
3737static void stl_cd1400flush(stlport_t *portp)
3738{
3739 unsigned long flags;
3740
3741#ifdef DEBUG
3742 printk("stl_cd1400flush(portp=%x)\n", (int) portp);
3743#endif
3744
3745 if (portp == (stlport_t *) NULL)
3746 return;
3747
Alan Coxb65b5b52006-06-27 02:54:05 -07003748 spin_lock_irqsave(&brd_lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003749 BRDENABLE(portp->brdnr, portp->pagenr);
3750 stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03));
3751 stl_cd1400ccrwait(portp);
3752 stl_cd1400setreg(portp, CCR, CCR_TXFLUSHFIFO);
3753 stl_cd1400ccrwait(portp);
3754 portp->tx.tail = portp->tx.head;
3755 BRDDISABLE(portp->brdnr);
Alan Coxb65b5b52006-06-27 02:54:05 -07003756 spin_unlock_irqrestore(&brd_lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003757}
3758
3759/*****************************************************************************/
3760
3761/*
3762 * Return the current state of data flow on this port. This is only
3763 * really interresting when determining if data has fully completed
3764 * transmission or not... This is easy for the cd1400, it accurately
3765 * maintains the busy port flag.
3766 */
3767
3768static int stl_cd1400datastate(stlport_t *portp)
3769{
3770#ifdef DEBUG
3771 printk("stl_cd1400datastate(portp=%x)\n", (int) portp);
3772#endif
3773
3774 if (portp == (stlport_t *) NULL)
Jesper Juhl014c2542006-01-15 02:37:08 +01003775 return 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003776
Jesper Juhl014c2542006-01-15 02:37:08 +01003777 return test_bit(ASYI_TXBUSY, &portp->istate) ? 1 : 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003778}
3779
3780/*****************************************************************************/
3781
3782/*
3783 * Interrupt service routine for cd1400 EasyIO boards.
3784 */
3785
3786static void stl_cd1400eiointr(stlpanel_t *panelp, unsigned int iobase)
3787{
3788 unsigned char svrtype;
3789
3790#ifdef DEBUG
3791 printk("stl_cd1400eiointr(panelp=%x,iobase=%x)\n",
3792 (int) panelp, iobase);
3793#endif
3794
Alan Coxb65b5b52006-06-27 02:54:05 -07003795 spin_lock(&brd_lock);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003796 outb(SVRR, iobase);
3797 svrtype = inb(iobase + EREG_DATA);
3798 if (panelp->nrports > 4) {
3799 outb((SVRR + 0x80), iobase);
3800 svrtype |= inb(iobase + EREG_DATA);
3801 }
3802
3803 if (svrtype & SVRR_RX)
3804 stl_cd1400rxisr(panelp, iobase);
3805 else if (svrtype & SVRR_TX)
3806 stl_cd1400txisr(panelp, iobase);
3807 else if (svrtype & SVRR_MDM)
3808 stl_cd1400mdmisr(panelp, iobase);
Alan Coxb65b5b52006-06-27 02:54:05 -07003809
3810 spin_unlock(&brd_lock);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003811}
3812
3813/*****************************************************************************/
3814
3815/*
3816 * Interrupt service routine for cd1400 panels.
3817 */
3818
3819static void stl_cd1400echintr(stlpanel_t *panelp, unsigned int iobase)
3820{
3821 unsigned char svrtype;
3822
3823#ifdef DEBUG
3824 printk("stl_cd1400echintr(panelp=%x,iobase=%x)\n", (int) panelp,
3825 iobase);
3826#endif
3827
3828 outb(SVRR, iobase);
3829 svrtype = inb(iobase + EREG_DATA);
3830 outb((SVRR + 0x80), iobase);
3831 svrtype |= inb(iobase + EREG_DATA);
3832 if (svrtype & SVRR_RX)
3833 stl_cd1400rxisr(panelp, iobase);
3834 else if (svrtype & SVRR_TX)
3835 stl_cd1400txisr(panelp, iobase);
3836 else if (svrtype & SVRR_MDM)
3837 stl_cd1400mdmisr(panelp, iobase);
3838}
3839
3840
3841/*****************************************************************************/
3842
3843/*
3844 * Unfortunately we need to handle breaks in the TX data stream, since
3845 * this is the only way to generate them on the cd1400.
3846 */
3847
3848static inline int stl_cd1400breakisr(stlport_t *portp, int ioaddr)
3849{
3850 if (portp->brklen == 1) {
3851 outb((COR2 + portp->uartaddr), ioaddr);
3852 outb((inb(ioaddr + EREG_DATA) | COR2_ETC),
3853 (ioaddr + EREG_DATA));
3854 outb((TDR + portp->uartaddr), ioaddr);
3855 outb(ETC_CMD, (ioaddr + EREG_DATA));
3856 outb(ETC_STARTBREAK, (ioaddr + EREG_DATA));
3857 outb((SRER + portp->uartaddr), ioaddr);
3858 outb((inb(ioaddr + EREG_DATA) & ~(SRER_TXDATA | SRER_TXEMPTY)),
3859 (ioaddr + EREG_DATA));
Jesper Juhl014c2542006-01-15 02:37:08 +01003860 return 1;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003861 } else if (portp->brklen > 1) {
3862 outb((TDR + portp->uartaddr), ioaddr);
3863 outb(ETC_CMD, (ioaddr + EREG_DATA));
3864 outb(ETC_STOPBREAK, (ioaddr + EREG_DATA));
3865 portp->brklen = -1;
Jesper Juhl014c2542006-01-15 02:37:08 +01003866 return 1;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003867 } else {
3868 outb((COR2 + portp->uartaddr), ioaddr);
3869 outb((inb(ioaddr + EREG_DATA) & ~COR2_ETC),
3870 (ioaddr + EREG_DATA));
3871 portp->brklen = 0;
3872 }
Jesper Juhl014c2542006-01-15 02:37:08 +01003873 return 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003874}
3875
3876/*****************************************************************************/
3877
3878/*
3879 * Transmit interrupt handler. This has gotta be fast! Handling TX
3880 * chars is pretty simple, stuff as many as possible from the TX buffer
3881 * into the cd1400 FIFO. Must also handle TX breaks here, since they
3882 * are embedded as commands in the data stream. Oh no, had to use a goto!
3883 * This could be optimized more, will do when I get time...
3884 * In practice it is possible that interrupts are enabled but that the
3885 * port has been hung up. Need to handle not having any TX buffer here,
3886 * this is done by using the side effect that head and tail will also
3887 * be NULL if the buffer has been freed.
3888 */
3889
3890static void stl_cd1400txisr(stlpanel_t *panelp, int ioaddr)
3891{
3892 stlport_t *portp;
3893 int len, stlen;
3894 char *head, *tail;
3895 unsigned char ioack, srer;
3896
3897#ifdef DEBUG
3898 printk("stl_cd1400txisr(panelp=%x,ioaddr=%x)\n", (int) panelp, ioaddr);
3899#endif
3900
3901 ioack = inb(ioaddr + EREG_TXACK);
3902 if (((ioack & panelp->ackmask) != 0) ||
3903 ((ioack & ACK_TYPMASK) != ACK_TYPTX)) {
3904 printk("STALLION: bad TX interrupt ack value=%x\n", ioack);
3905 return;
3906 }
3907 portp = panelp->ports[(ioack >> 3)];
3908
3909/*
3910 * Unfortunately we need to handle breaks in the data stream, since
3911 * this is the only way to generate them on the cd1400. Do it now if
3912 * a break is to be sent.
3913 */
3914 if (portp->brklen != 0)
3915 if (stl_cd1400breakisr(portp, ioaddr))
3916 goto stl_txalldone;
3917
3918 head = portp->tx.head;
3919 tail = portp->tx.tail;
3920 len = (head >= tail) ? (head - tail) : (STL_TXBUFSIZE - (tail - head));
3921 if ((len == 0) || ((len < STL_TXBUFLOW) &&
3922 (test_bit(ASYI_TXLOW, &portp->istate) == 0))) {
3923 set_bit(ASYI_TXLOW, &portp->istate);
3924 schedule_work(&portp->tqueue);
3925 }
3926
3927 if (len == 0) {
3928 outb((SRER + portp->uartaddr), ioaddr);
3929 srer = inb(ioaddr + EREG_DATA);
3930 if (srer & SRER_TXDATA) {
3931 srer = (srer & ~SRER_TXDATA) | SRER_TXEMPTY;
3932 } else {
3933 srer &= ~(SRER_TXDATA | SRER_TXEMPTY);
3934 clear_bit(ASYI_TXBUSY, &portp->istate);
3935 }
3936 outb(srer, (ioaddr + EREG_DATA));
3937 } else {
3938 len = MIN(len, CD1400_TXFIFOSIZE);
3939 portp->stats.txtotal += len;
3940 stlen = MIN(len, ((portp->tx.buf + STL_TXBUFSIZE) - tail));
3941 outb((TDR + portp->uartaddr), ioaddr);
3942 outsb((ioaddr + EREG_DATA), tail, stlen);
3943 len -= stlen;
3944 tail += stlen;
3945 if (tail >= (portp->tx.buf + STL_TXBUFSIZE))
3946 tail = portp->tx.buf;
3947 if (len > 0) {
3948 outsb((ioaddr + EREG_DATA), tail, len);
3949 tail += len;
3950 }
3951 portp->tx.tail = tail;
3952 }
3953
3954stl_txalldone:
3955 outb((EOSRR + portp->uartaddr), ioaddr);
3956 outb(0, (ioaddr + EREG_DATA));
3957}
3958
3959/*****************************************************************************/
3960
3961/*
3962 * Receive character interrupt handler. Determine if we have good chars
3963 * or bad chars and then process appropriately. Good chars are easy
3964 * just shove the lot into the RX buffer and set all status byte to 0.
3965 * If a bad RX char then process as required. This routine needs to be
3966 * fast! In practice it is possible that we get an interrupt on a port
3967 * that is closed. This can happen on hangups - since they completely
3968 * shutdown a port not in user context. Need to handle this case.
3969 */
3970
3971static void stl_cd1400rxisr(stlpanel_t *panelp, int ioaddr)
3972{
3973 stlport_t *portp;
3974 struct tty_struct *tty;
3975 unsigned int ioack, len, buflen;
3976 unsigned char status;
3977 char ch;
3978
3979#ifdef DEBUG
3980 printk("stl_cd1400rxisr(panelp=%x,ioaddr=%x)\n", (int) panelp, ioaddr);
3981#endif
3982
3983 ioack = inb(ioaddr + EREG_RXACK);
3984 if ((ioack & panelp->ackmask) != 0) {
3985 printk("STALLION: bad RX interrupt ack value=%x\n", ioack);
3986 return;
3987 }
3988 portp = panelp->ports[(ioack >> 3)];
3989 tty = portp->tty;
3990
3991 if ((ioack & ACK_TYPMASK) == ACK_TYPRXGOOD) {
3992 outb((RDCR + portp->uartaddr), ioaddr);
3993 len = inb(ioaddr + EREG_DATA);
Alan Cox33f0f882006-01-09 20:54:13 -08003994 if (tty == NULL || (buflen = tty_buffer_request_room(tty, len)) == 0) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07003995 len = MIN(len, sizeof(stl_unwanted));
3996 outb((RDSR + portp->uartaddr), ioaddr);
3997 insb((ioaddr + EREG_DATA), &stl_unwanted[0], len);
3998 portp->stats.rxlost += len;
3999 portp->stats.rxtotal += len;
4000 } else {
4001 len = MIN(len, buflen);
4002 if (len > 0) {
Alan Cox33f0f882006-01-09 20:54:13 -08004003 unsigned char *ptr;
Linus Torvalds1da177e2005-04-16 15:20:36 -07004004 outb((RDSR + portp->uartaddr), ioaddr);
Alan Cox33f0f882006-01-09 20:54:13 -08004005 tty_prepare_flip_string(tty, &ptr, len);
4006 insb((ioaddr + EREG_DATA), ptr, len);
Linus Torvalds1da177e2005-04-16 15:20:36 -07004007 tty_schedule_flip(tty);
4008 portp->stats.rxtotal += len;
4009 }
4010 }
4011 } else if ((ioack & ACK_TYPMASK) == ACK_TYPRXBAD) {
4012 outb((RDSR + portp->uartaddr), ioaddr);
4013 status = inb(ioaddr + EREG_DATA);
4014 ch = inb(ioaddr + EREG_DATA);
4015 if (status & ST_PARITY)
4016 portp->stats.rxparity++;
4017 if (status & ST_FRAMING)
4018 portp->stats.rxframing++;
4019 if (status & ST_OVERRUN)
4020 portp->stats.rxoverrun++;
4021 if (status & ST_BREAK)
4022 portp->stats.rxbreaks++;
4023 if (status & ST_SCHARMASK) {
4024 if ((status & ST_SCHARMASK) == ST_SCHAR1)
4025 portp->stats.txxon++;
4026 if ((status & ST_SCHARMASK) == ST_SCHAR2)
4027 portp->stats.txxoff++;
4028 goto stl_rxalldone;
4029 }
Alan Cox33f0f882006-01-09 20:54:13 -08004030 if (tty != NULL && (portp->rxignoremsk & status) == 0) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07004031 if (portp->rxmarkmsk & status) {
4032 if (status & ST_BREAK) {
4033 status = TTY_BREAK;
4034 if (portp->flags & ASYNC_SAK) {
4035 do_SAK(tty);
4036 BRDENABLE(portp->brdnr, portp->pagenr);
4037 }
4038 } else if (status & ST_PARITY) {
4039 status = TTY_PARITY;
4040 } else if (status & ST_FRAMING) {
4041 status = TTY_FRAME;
4042 } else if(status & ST_OVERRUN) {
4043 status = TTY_OVERRUN;
4044 } else {
4045 status = 0;
4046 }
4047 } else {
4048 status = 0;
4049 }
Alan Cox33f0f882006-01-09 20:54:13 -08004050 tty_insert_flip_char(tty, ch, status);
4051 tty_schedule_flip(tty);
Linus Torvalds1da177e2005-04-16 15:20:36 -07004052 }
4053 } else {
4054 printk("STALLION: bad RX interrupt ack value=%x\n", ioack);
4055 return;
4056 }
4057
4058stl_rxalldone:
4059 outb((EOSRR + portp->uartaddr), ioaddr);
4060 outb(0, (ioaddr + EREG_DATA));
4061}
4062
4063/*****************************************************************************/
4064
4065/*
4066 * Modem interrupt handler. The is called when the modem signal line
4067 * (DCD) has changed state. Leave most of the work to the off-level
4068 * processing routine.
4069 */
4070
4071static void stl_cd1400mdmisr(stlpanel_t *panelp, int ioaddr)
4072{
4073 stlport_t *portp;
4074 unsigned int ioack;
4075 unsigned char misr;
4076
4077#ifdef DEBUG
4078 printk("stl_cd1400mdmisr(panelp=%x)\n", (int) panelp);
4079#endif
4080
4081 ioack = inb(ioaddr + EREG_MDACK);
4082 if (((ioack & panelp->ackmask) != 0) ||
4083 ((ioack & ACK_TYPMASK) != ACK_TYPMDM)) {
4084 printk("STALLION: bad MODEM interrupt ack value=%x\n", ioack);
4085 return;
4086 }
4087 portp = panelp->ports[(ioack >> 3)];
4088
4089 outb((MISR + portp->uartaddr), ioaddr);
4090 misr = inb(ioaddr + EREG_DATA);
4091 if (misr & MISR_DCD) {
4092 set_bit(ASYI_DCDCHANGE, &portp->istate);
4093 schedule_work(&portp->tqueue);
4094 portp->stats.modem++;
4095 }
4096
4097 outb((EOSRR + portp->uartaddr), ioaddr);
4098 outb(0, (ioaddr + EREG_DATA));
4099}
4100
4101/*****************************************************************************/
4102/* SC26198 HARDWARE FUNCTIONS */
4103/*****************************************************************************/
4104
4105/*
4106 * These functions get/set/update the registers of the sc26198 UARTs.
4107 * Access to the sc26198 registers is via an address/data io port pair.
4108 * (Maybe should make this inline...)
4109 */
4110
4111static int stl_sc26198getreg(stlport_t *portp, int regnr)
4112{
4113 outb((regnr | portp->uartaddr), (portp->ioaddr + XP_ADDR));
Jesper Juhl014c2542006-01-15 02:37:08 +01004114 return inb(portp->ioaddr + XP_DATA);
Linus Torvalds1da177e2005-04-16 15:20:36 -07004115}
4116
4117static void stl_sc26198setreg(stlport_t *portp, int regnr, int value)
4118{
4119 outb((regnr | portp->uartaddr), (portp->ioaddr + XP_ADDR));
4120 outb(value, (portp->ioaddr + XP_DATA));
4121}
4122
4123static int stl_sc26198updatereg(stlport_t *portp, int regnr, int value)
4124{
4125 outb((regnr | portp->uartaddr), (portp->ioaddr + XP_ADDR));
4126 if (inb(portp->ioaddr + XP_DATA) != value) {
4127 outb(value, (portp->ioaddr + XP_DATA));
Jesper Juhl014c2542006-01-15 02:37:08 +01004128 return 1;
Linus Torvalds1da177e2005-04-16 15:20:36 -07004129 }
Jesper Juhl014c2542006-01-15 02:37:08 +01004130 return 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07004131}
4132
4133/*****************************************************************************/
4134
4135/*
4136 * Functions to get and set the sc26198 global registers.
4137 */
4138
4139static int stl_sc26198getglobreg(stlport_t *portp, int regnr)
4140{
4141 outb(regnr, (portp->ioaddr + XP_ADDR));
Jesper Juhl014c2542006-01-15 02:37:08 +01004142 return inb(portp->ioaddr + XP_DATA);
Linus Torvalds1da177e2005-04-16 15:20:36 -07004143}
4144
4145#if 0
4146static void stl_sc26198setglobreg(stlport_t *portp, int regnr, int value)
4147{
4148 outb(regnr, (portp->ioaddr + XP_ADDR));
4149 outb(value, (portp->ioaddr + XP_DATA));
4150}
4151#endif
4152
4153/*****************************************************************************/
4154
4155/*
4156 * Inbitialize the UARTs in a panel. We don't care what sort of board
4157 * these ports are on - since the port io registers are almost
4158 * identical when dealing with ports.
4159 */
4160
4161static int stl_sc26198panelinit(stlbrd_t *brdp, stlpanel_t *panelp)
4162{
4163 int chipmask, i;
4164 int nrchips, ioaddr;
4165
4166#ifdef DEBUG
4167 printk("stl_sc26198panelinit(brdp=%x,panelp=%x)\n",
4168 (int) brdp, (int) panelp);
4169#endif
4170
4171 BRDENABLE(panelp->brdnr, panelp->pagenr);
4172
4173/*
4174 * Check that each chip is present and started up OK.
4175 */
4176 chipmask = 0;
4177 nrchips = (panelp->nrports + 4) / SC26198_PORTS;
4178 if (brdp->brdtype == BRD_ECHPCI)
4179 outb(panelp->pagenr, brdp->ioctrl);
4180
4181 for (i = 0; (i < nrchips); i++) {
4182 ioaddr = panelp->iobase + (i * 4);
4183 outb(SCCR, (ioaddr + XP_ADDR));
4184 outb(CR_RESETALL, (ioaddr + XP_DATA));
4185 outb(TSTR, (ioaddr + XP_ADDR));
4186 if (inb(ioaddr + XP_DATA) != 0) {
4187 printk("STALLION: sc26198 not responding, "
4188 "brd=%d panel=%d chip=%d\n",
4189 panelp->brdnr, panelp->panelnr, i);
4190 continue;
4191 }
4192 chipmask |= (0x1 << i);
4193 outb(GCCR, (ioaddr + XP_ADDR));
4194 outb(GCCR_IVRTYPCHANACK, (ioaddr + XP_DATA));
4195 outb(WDTRCR, (ioaddr + XP_ADDR));
4196 outb(0xff, (ioaddr + XP_DATA));
4197 }
4198
4199 BRDDISABLE(panelp->brdnr);
Jesper Juhl014c2542006-01-15 02:37:08 +01004200 return chipmask;
Linus Torvalds1da177e2005-04-16 15:20:36 -07004201}
4202
4203/*****************************************************************************/
4204
4205/*
4206 * Initialize hardware specific port registers.
4207 */
4208
4209static void stl_sc26198portinit(stlbrd_t *brdp, stlpanel_t *panelp, stlport_t *portp)
4210{
4211#ifdef DEBUG
4212 printk("stl_sc26198portinit(brdp=%x,panelp=%x,portp=%x)\n",
4213 (int) brdp, (int) panelp, (int) portp);
4214#endif
4215
4216 if ((brdp == (stlbrd_t *) NULL) || (panelp == (stlpanel_t *) NULL) ||
4217 (portp == (stlport_t *) NULL))
4218 return;
4219
4220 portp->ioaddr = panelp->iobase + ((portp->portnr < 8) ? 0 : 4);
4221 portp->uartaddr = (portp->portnr & 0x07) << 4;
4222 portp->pagenr = panelp->pagenr;
4223 portp->hwid = 0x1;
4224
4225 BRDENABLE(portp->brdnr, portp->pagenr);
4226 stl_sc26198setreg(portp, IOPCR, IOPCR_SETSIGS);
4227 BRDDISABLE(portp->brdnr);
4228}
4229
4230/*****************************************************************************/
4231
4232/*
4233 * Set up the sc26198 registers for a port based on the termios port
4234 * settings.
4235 */
4236
4237static void stl_sc26198setport(stlport_t *portp, struct termios *tiosp)
4238{
4239 stlbrd_t *brdp;
4240 unsigned long flags;
4241 unsigned int baudrate;
4242 unsigned char mr0, mr1, mr2, clk;
4243 unsigned char imron, imroff, iopr, ipr;
4244
4245 mr0 = 0;
4246 mr1 = 0;
4247 mr2 = 0;
4248 clk = 0;
4249 iopr = 0;
4250 imron = 0;
4251 imroff = 0;
4252
4253 brdp = stl_brds[portp->brdnr];
4254 if (brdp == (stlbrd_t *) NULL)
4255 return;
4256
4257/*
4258 * Set up the RX char ignore mask with those RX error types we
4259 * can ignore.
4260 */
4261 portp->rxignoremsk = 0;
4262 if (tiosp->c_iflag & IGNPAR)
4263 portp->rxignoremsk |= (SR_RXPARITY | SR_RXFRAMING |
4264 SR_RXOVERRUN);
4265 if (tiosp->c_iflag & IGNBRK)
4266 portp->rxignoremsk |= SR_RXBREAK;
4267
4268 portp->rxmarkmsk = SR_RXOVERRUN;
4269 if (tiosp->c_iflag & (INPCK | PARMRK))
4270 portp->rxmarkmsk |= (SR_RXPARITY | SR_RXFRAMING);
4271 if (tiosp->c_iflag & BRKINT)
4272 portp->rxmarkmsk |= SR_RXBREAK;
4273
4274/*
4275 * Go through the char size, parity and stop bits and set all the
4276 * option register appropriately.
4277 */
4278 switch (tiosp->c_cflag & CSIZE) {
4279 case CS5:
4280 mr1 |= MR1_CS5;
4281 break;
4282 case CS6:
4283 mr1 |= MR1_CS6;
4284 break;
4285 case CS7:
4286 mr1 |= MR1_CS7;
4287 break;
4288 default:
4289 mr1 |= MR1_CS8;
4290 break;
4291 }
4292
4293 if (tiosp->c_cflag & CSTOPB)
4294 mr2 |= MR2_STOP2;
4295 else
4296 mr2 |= MR2_STOP1;
4297
4298 if (tiosp->c_cflag & PARENB) {
4299 if (tiosp->c_cflag & PARODD)
4300 mr1 |= (MR1_PARENB | MR1_PARODD);
4301 else
4302 mr1 |= (MR1_PARENB | MR1_PAREVEN);
4303 } else {
4304 mr1 |= MR1_PARNONE;
4305 }
4306
4307 mr1 |= MR1_ERRBLOCK;
4308
4309/*
4310 * Set the RX FIFO threshold at 8 chars. This gives a bit of breathing
4311 * space for hardware flow control and the like. This should be set to
4312 * VMIN.
4313 */
4314 mr2 |= MR2_RXFIFOHALF;
4315
4316/*
4317 * Calculate the baud rate timers. For now we will just assume that
4318 * the input and output baud are the same. The sc26198 has a fixed
4319 * baud rate table, so only discrete baud rates possible.
4320 */
4321 baudrate = tiosp->c_cflag & CBAUD;
4322 if (baudrate & CBAUDEX) {
4323 baudrate &= ~CBAUDEX;
4324 if ((baudrate < 1) || (baudrate > 4))
4325 tiosp->c_cflag &= ~CBAUDEX;
4326 else
4327 baudrate += 15;
4328 }
4329 baudrate = stl_baudrates[baudrate];
4330 if ((tiosp->c_cflag & CBAUD) == B38400) {
4331 if ((portp->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
4332 baudrate = 57600;
4333 else if ((portp->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
4334 baudrate = 115200;
4335 else if ((portp->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
4336 baudrate = 230400;
4337 else if ((portp->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
4338 baudrate = 460800;
4339 else if ((portp->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST)
4340 baudrate = (portp->baud_base / portp->custom_divisor);
4341 }
4342 if (baudrate > STL_SC26198MAXBAUD)
4343 baudrate = STL_SC26198MAXBAUD;
4344
4345 if (baudrate > 0) {
4346 for (clk = 0; (clk < SC26198_NRBAUDS); clk++) {
4347 if (baudrate <= sc26198_baudtable[clk])
4348 break;
4349 }
4350 }
4351
4352/*
4353 * Check what form of modem signaling is required and set it up.
4354 */
4355 if (tiosp->c_cflag & CLOCAL) {
4356 portp->flags &= ~ASYNC_CHECK_CD;
4357 } else {
4358 iopr |= IOPR_DCDCOS;
4359 imron |= IR_IOPORT;
4360 portp->flags |= ASYNC_CHECK_CD;
4361 }
4362
4363/*
4364 * Setup sc26198 enhanced modes if we can. In particular we want to
4365 * handle as much of the flow control as possible automatically. As
4366 * well as saving a few CPU cycles it will also greatly improve flow
4367 * control reliability.
4368 */
4369 if (tiosp->c_iflag & IXON) {
4370 mr0 |= MR0_SWFTX | MR0_SWFT;
4371 imron |= IR_XONXOFF;
4372 } else {
4373 imroff |= IR_XONXOFF;
4374 }
4375 if (tiosp->c_iflag & IXOFF)
4376 mr0 |= MR0_SWFRX;
4377
4378 if (tiosp->c_cflag & CRTSCTS) {
4379 mr2 |= MR2_AUTOCTS;
4380 mr1 |= MR1_AUTORTS;
4381 }
4382
4383/*
4384 * All sc26198 register values calculated so go through and set
4385 * them all up.
4386 */
4387
4388#ifdef DEBUG
4389 printk("SETPORT: portnr=%d panelnr=%d brdnr=%d\n",
4390 portp->portnr, portp->panelnr, portp->brdnr);
4391 printk(" mr0=%x mr1=%x mr2=%x clk=%x\n", mr0, mr1, mr2, clk);
4392 printk(" iopr=%x imron=%x imroff=%x\n", iopr, imron, imroff);
4393 printk(" schr1=%x schr2=%x schr3=%x schr4=%x\n",
4394 tiosp->c_cc[VSTART], tiosp->c_cc[VSTOP],
4395 tiosp->c_cc[VSTART], tiosp->c_cc[VSTOP]);
4396#endif
4397
Alan Coxb65b5b52006-06-27 02:54:05 -07004398 spin_lock_irqsave(&brd_lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07004399 BRDENABLE(portp->brdnr, portp->pagenr);
4400 stl_sc26198setreg(portp, IMR, 0);
4401 stl_sc26198updatereg(portp, MR0, mr0);
4402 stl_sc26198updatereg(portp, MR1, mr1);
4403 stl_sc26198setreg(portp, SCCR, CR_RXERRBLOCK);
4404 stl_sc26198updatereg(portp, MR2, mr2);
4405 stl_sc26198updatereg(portp, IOPIOR,
4406 ((stl_sc26198getreg(portp, IOPIOR) & ~IPR_CHANGEMASK) | iopr));
4407
4408 if (baudrate > 0) {
4409 stl_sc26198setreg(portp, TXCSR, clk);
4410 stl_sc26198setreg(portp, RXCSR, clk);
4411 }
4412
4413 stl_sc26198setreg(portp, XONCR, tiosp->c_cc[VSTART]);
4414 stl_sc26198setreg(portp, XOFFCR, tiosp->c_cc[VSTOP]);
4415
4416 ipr = stl_sc26198getreg(portp, IPR);
4417 if (ipr & IPR_DCD)
4418 portp->sigs &= ~TIOCM_CD;
4419 else
4420 portp->sigs |= TIOCM_CD;
4421
4422 portp->imr = (portp->imr & ~imroff) | imron;
4423 stl_sc26198setreg(portp, IMR, portp->imr);
4424 BRDDISABLE(portp->brdnr);
Alan Coxb65b5b52006-06-27 02:54:05 -07004425 spin_unlock_irqrestore(&brd_lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07004426}
4427
4428/*****************************************************************************/
4429
4430/*
4431 * Set the state of the DTR and RTS signals.
4432 */
4433
4434static void stl_sc26198setsignals(stlport_t *portp, int dtr, int rts)
4435{
4436 unsigned char iopioron, iopioroff;
4437 unsigned long flags;
4438
4439#ifdef DEBUG
4440 printk("stl_sc26198setsignals(portp=%x,dtr=%d,rts=%d)\n",
4441 (int) portp, dtr, rts);
4442#endif
4443
4444 iopioron = 0;
4445 iopioroff = 0;
4446 if (dtr == 0)
4447 iopioroff |= IPR_DTR;
4448 else if (dtr > 0)
4449 iopioron |= IPR_DTR;
4450 if (rts == 0)
4451 iopioroff |= IPR_RTS;
4452 else if (rts > 0)
4453 iopioron |= IPR_RTS;
4454
Alan Coxb65b5b52006-06-27 02:54:05 -07004455 spin_lock_irqsave(&brd_lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07004456 BRDENABLE(portp->brdnr, portp->pagenr);
4457 stl_sc26198setreg(portp, IOPIOR,
4458 ((stl_sc26198getreg(portp, IOPIOR) & ~iopioroff) | iopioron));
4459 BRDDISABLE(portp->brdnr);
Alan Coxb65b5b52006-06-27 02:54:05 -07004460 spin_unlock_irqrestore(&brd_lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07004461}
4462
4463/*****************************************************************************/
4464
4465/*
4466 * Return the state of the signals.
4467 */
4468
4469static int stl_sc26198getsignals(stlport_t *portp)
4470{
4471 unsigned char ipr;
4472 unsigned long flags;
4473 int sigs;
4474
4475#ifdef DEBUG
4476 printk("stl_sc26198getsignals(portp=%x)\n", (int) portp);
4477#endif
4478
Alan Coxb65b5b52006-06-27 02:54:05 -07004479 spin_lock_irqsave(&brd_lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07004480 BRDENABLE(portp->brdnr, portp->pagenr);
4481 ipr = stl_sc26198getreg(portp, IPR);
4482 BRDDISABLE(portp->brdnr);
Alan Coxb65b5b52006-06-27 02:54:05 -07004483 spin_unlock_irqrestore(&brd_lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07004484
4485 sigs = 0;
4486 sigs |= (ipr & IPR_DCD) ? 0 : TIOCM_CD;
4487 sigs |= (ipr & IPR_CTS) ? 0 : TIOCM_CTS;
4488 sigs |= (ipr & IPR_DTR) ? 0: TIOCM_DTR;
4489 sigs |= (ipr & IPR_RTS) ? 0: TIOCM_RTS;
4490 sigs |= TIOCM_DSR;
Jesper Juhl014c2542006-01-15 02:37:08 +01004491 return sigs;
Linus Torvalds1da177e2005-04-16 15:20:36 -07004492}
4493
4494/*****************************************************************************/
4495
4496/*
4497 * Enable/Disable the Transmitter and/or Receiver.
4498 */
4499
4500static void stl_sc26198enablerxtx(stlport_t *portp, int rx, int tx)
4501{
4502 unsigned char ccr;
4503 unsigned long flags;
4504
4505#ifdef DEBUG
4506 printk("stl_sc26198enablerxtx(portp=%x,rx=%d,tx=%d)\n",
4507 (int) portp, rx, tx);
4508#endif
4509
4510 ccr = portp->crenable;
4511 if (tx == 0)
4512 ccr &= ~CR_TXENABLE;
4513 else if (tx > 0)
4514 ccr |= CR_TXENABLE;
4515 if (rx == 0)
4516 ccr &= ~CR_RXENABLE;
4517 else if (rx > 0)
4518 ccr |= CR_RXENABLE;
4519
Alan Coxb65b5b52006-06-27 02:54:05 -07004520 spin_lock_irqsave(&brd_lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07004521 BRDENABLE(portp->brdnr, portp->pagenr);
4522 stl_sc26198setreg(portp, SCCR, ccr);
4523 BRDDISABLE(portp->brdnr);
4524 portp->crenable = ccr;
Alan Coxb65b5b52006-06-27 02:54:05 -07004525 spin_unlock_irqrestore(&brd_lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07004526}
4527
4528/*****************************************************************************/
4529
4530/*
4531 * Start/stop the Transmitter and/or Receiver.
4532 */
4533
4534static void stl_sc26198startrxtx(stlport_t *portp, int rx, int tx)
4535{
4536 unsigned char imr;
4537 unsigned long flags;
4538
4539#ifdef DEBUG
4540 printk("stl_sc26198startrxtx(portp=%x,rx=%d,tx=%d)\n",
4541 (int) portp, rx, tx);
4542#endif
4543
4544 imr = portp->imr;
4545 if (tx == 0)
4546 imr &= ~IR_TXRDY;
4547 else if (tx == 1)
4548 imr |= IR_TXRDY;
4549 if (rx == 0)
4550 imr &= ~(IR_RXRDY | IR_RXBREAK | IR_RXWATCHDOG);
4551 else if (rx > 0)
4552 imr |= IR_RXRDY | IR_RXBREAK | IR_RXWATCHDOG;
4553
Alan Coxb65b5b52006-06-27 02:54:05 -07004554 spin_lock_irqsave(&brd_lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07004555 BRDENABLE(portp->brdnr, portp->pagenr);
4556 stl_sc26198setreg(portp, IMR, imr);
4557 BRDDISABLE(portp->brdnr);
4558 portp->imr = imr;
4559 if (tx > 0)
4560 set_bit(ASYI_TXBUSY, &portp->istate);
Alan Coxb65b5b52006-06-27 02:54:05 -07004561 spin_unlock_irqrestore(&brd_lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07004562}
4563
4564/*****************************************************************************/
4565
4566/*
4567 * Disable all interrupts from this port.
4568 */
4569
4570static void stl_sc26198disableintrs(stlport_t *portp)
4571{
4572 unsigned long flags;
4573
4574#ifdef DEBUG
4575 printk("stl_sc26198disableintrs(portp=%x)\n", (int) portp);
4576#endif
4577
Alan Coxb65b5b52006-06-27 02:54:05 -07004578 spin_lock_irqsave(&brd_lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07004579 BRDENABLE(portp->brdnr, portp->pagenr);
4580 portp->imr = 0;
4581 stl_sc26198setreg(portp, IMR, 0);
4582 BRDDISABLE(portp->brdnr);
Alan Coxb65b5b52006-06-27 02:54:05 -07004583 spin_unlock_irqrestore(&brd_lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07004584}
4585
4586/*****************************************************************************/
4587
4588static void stl_sc26198sendbreak(stlport_t *portp, int len)
4589{
4590 unsigned long flags;
4591
4592#ifdef DEBUG
4593 printk("stl_sc26198sendbreak(portp=%x,len=%d)\n", (int) portp, len);
4594#endif
4595
Alan Coxb65b5b52006-06-27 02:54:05 -07004596 spin_lock_irqsave(&brd_lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07004597 BRDENABLE(portp->brdnr, portp->pagenr);
4598 if (len == 1) {
4599 stl_sc26198setreg(portp, SCCR, CR_TXSTARTBREAK);
4600 portp->stats.txbreaks++;
4601 } else {
4602 stl_sc26198setreg(portp, SCCR, CR_TXSTOPBREAK);
4603 }
4604 BRDDISABLE(portp->brdnr);
Alan Coxb65b5b52006-06-27 02:54:05 -07004605 spin_unlock_irqrestore(&brd_lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07004606}
4607
4608/*****************************************************************************/
4609
4610/*
4611 * Take flow control actions...
4612 */
4613
4614static void stl_sc26198flowctrl(stlport_t *portp, int state)
4615{
4616 struct tty_struct *tty;
4617 unsigned long flags;
4618 unsigned char mr0;
4619
4620#ifdef DEBUG
4621 printk("stl_sc26198flowctrl(portp=%x,state=%x)\n", (int) portp, state);
4622#endif
4623
4624 if (portp == (stlport_t *) NULL)
4625 return;
4626 tty = portp->tty;
4627 if (tty == (struct tty_struct *) NULL)
4628 return;
4629
Alan Coxb65b5b52006-06-27 02:54:05 -07004630 spin_lock_irqsave(&brd_lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07004631 BRDENABLE(portp->brdnr, portp->pagenr);
4632
4633 if (state) {
4634 if (tty->termios->c_iflag & IXOFF) {
4635 mr0 = stl_sc26198getreg(portp, MR0);
4636 stl_sc26198setreg(portp, MR0, (mr0 & ~MR0_SWFRXTX));
4637 stl_sc26198setreg(portp, SCCR, CR_TXSENDXON);
4638 mr0 |= MR0_SWFRX;
4639 portp->stats.rxxon++;
4640 stl_sc26198wait(portp);
4641 stl_sc26198setreg(portp, MR0, mr0);
4642 }
4643/*
4644 * Question: should we return RTS to what it was before? It may
4645 * have been set by an ioctl... Suppose not, since if you have
4646 * hardware flow control set then it is pretty silly to go and
4647 * set the RTS line by hand.
4648 */
4649 if (tty->termios->c_cflag & CRTSCTS) {
4650 stl_sc26198setreg(portp, MR1,
4651 (stl_sc26198getreg(portp, MR1) | MR1_AUTORTS));
4652 stl_sc26198setreg(portp, IOPIOR,
4653 (stl_sc26198getreg(portp, IOPIOR) | IOPR_RTS));
4654 portp->stats.rxrtson++;
4655 }
4656 } else {
4657 if (tty->termios->c_iflag & IXOFF) {
4658 mr0 = stl_sc26198getreg(portp, MR0);
4659 stl_sc26198setreg(portp, MR0, (mr0 & ~MR0_SWFRXTX));
4660 stl_sc26198setreg(portp, SCCR, CR_TXSENDXOFF);
4661 mr0 &= ~MR0_SWFRX;
4662 portp->stats.rxxoff++;
4663 stl_sc26198wait(portp);
4664 stl_sc26198setreg(portp, MR0, mr0);
4665 }
4666 if (tty->termios->c_cflag & CRTSCTS) {
4667 stl_sc26198setreg(portp, MR1,
4668 (stl_sc26198getreg(portp, MR1) & ~MR1_AUTORTS));
4669 stl_sc26198setreg(portp, IOPIOR,
4670 (stl_sc26198getreg(portp, IOPIOR) & ~IOPR_RTS));
4671 portp->stats.rxrtsoff++;
4672 }
4673 }
4674
4675 BRDDISABLE(portp->brdnr);
Alan Coxb65b5b52006-06-27 02:54:05 -07004676 spin_unlock_irqrestore(&brd_lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07004677}
4678
4679/*****************************************************************************/
4680
4681/*
4682 * Send a flow control character.
4683 */
4684
4685static void stl_sc26198sendflow(stlport_t *portp, int state)
4686{
4687 struct tty_struct *tty;
4688 unsigned long flags;
4689 unsigned char mr0;
4690
4691#ifdef DEBUG
4692 printk("stl_sc26198sendflow(portp=%x,state=%x)\n", (int) portp, state);
4693#endif
4694
4695 if (portp == (stlport_t *) NULL)
4696 return;
4697 tty = portp->tty;
4698 if (tty == (struct tty_struct *) NULL)
4699 return;
4700
Alan Coxb65b5b52006-06-27 02:54:05 -07004701 spin_lock_irqsave(&brd_lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07004702 BRDENABLE(portp->brdnr, portp->pagenr);
4703 if (state) {
4704 mr0 = stl_sc26198getreg(portp, MR0);
4705 stl_sc26198setreg(portp, MR0, (mr0 & ~MR0_SWFRXTX));
4706 stl_sc26198setreg(portp, SCCR, CR_TXSENDXON);
4707 mr0 |= MR0_SWFRX;
4708 portp->stats.rxxon++;
4709 stl_sc26198wait(portp);
4710 stl_sc26198setreg(portp, MR0, mr0);
4711 } else {
4712 mr0 = stl_sc26198getreg(portp, MR0);
4713 stl_sc26198setreg(portp, MR0, (mr0 & ~MR0_SWFRXTX));
4714 stl_sc26198setreg(portp, SCCR, CR_TXSENDXOFF);
4715 mr0 &= ~MR0_SWFRX;
4716 portp->stats.rxxoff++;
4717 stl_sc26198wait(portp);
4718 stl_sc26198setreg(portp, MR0, mr0);
4719 }
4720 BRDDISABLE(portp->brdnr);
Alan Coxb65b5b52006-06-27 02:54:05 -07004721 spin_unlock_irqrestore(&brd_lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07004722}
4723
4724/*****************************************************************************/
4725
4726static void stl_sc26198flush(stlport_t *portp)
4727{
4728 unsigned long flags;
4729
4730#ifdef DEBUG
4731 printk("stl_sc26198flush(portp=%x)\n", (int) portp);
4732#endif
4733
4734 if (portp == (stlport_t *) NULL)
4735 return;
4736
Alan Coxb65b5b52006-06-27 02:54:05 -07004737 spin_lock_irqsave(&brd_lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07004738 BRDENABLE(portp->brdnr, portp->pagenr);
4739 stl_sc26198setreg(portp, SCCR, CR_TXRESET);
4740 stl_sc26198setreg(portp, SCCR, portp->crenable);
4741 BRDDISABLE(portp->brdnr);
4742 portp->tx.tail = portp->tx.head;
Alan Coxb65b5b52006-06-27 02:54:05 -07004743 spin_unlock_irqrestore(&brd_lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07004744}
4745
4746/*****************************************************************************/
4747
4748/*
4749 * Return the current state of data flow on this port. This is only
4750 * really interresting when determining if data has fully completed
4751 * transmission or not... The sc26198 interrupt scheme cannot
4752 * determine when all data has actually drained, so we need to
4753 * check the port statusy register to be sure.
4754 */
4755
4756static int stl_sc26198datastate(stlport_t *portp)
4757{
4758 unsigned long flags;
4759 unsigned char sr;
4760
4761#ifdef DEBUG
4762 printk("stl_sc26198datastate(portp=%x)\n", (int) portp);
4763#endif
4764
4765 if (portp == (stlport_t *) NULL)
Jesper Juhl014c2542006-01-15 02:37:08 +01004766 return 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07004767 if (test_bit(ASYI_TXBUSY, &portp->istate))
Jesper Juhl014c2542006-01-15 02:37:08 +01004768 return 1;
Linus Torvalds1da177e2005-04-16 15:20:36 -07004769
Alan Coxb65b5b52006-06-27 02:54:05 -07004770 spin_lock_irqsave(&brd_lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07004771 BRDENABLE(portp->brdnr, portp->pagenr);
4772 sr = stl_sc26198getreg(portp, SR);
4773 BRDDISABLE(portp->brdnr);
Alan Coxb65b5b52006-06-27 02:54:05 -07004774 spin_unlock_irqrestore(&brd_lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07004775
Jesper Juhl014c2542006-01-15 02:37:08 +01004776 return (sr & SR_TXEMPTY) ? 0 : 1;
Linus Torvalds1da177e2005-04-16 15:20:36 -07004777}
4778
4779/*****************************************************************************/
4780
4781/*
4782 * Delay for a small amount of time, to give the sc26198 a chance
4783 * to process a command...
4784 */
4785
4786static void stl_sc26198wait(stlport_t *portp)
4787{
4788 int i;
4789
4790#ifdef DEBUG
4791 printk("stl_sc26198wait(portp=%x)\n", (int) portp);
4792#endif
4793
4794 if (portp == (stlport_t *) NULL)
4795 return;
4796
4797 for (i = 0; (i < 20); i++)
4798 stl_sc26198getglobreg(portp, TSTR);
4799}
4800
4801/*****************************************************************************/
4802
4803/*
4804 * If we are TX flow controlled and in IXANY mode then we may
4805 * need to unflow control here. We gotta do this because of the
4806 * automatic flow control modes of the sc26198.
4807 */
4808
4809static inline void stl_sc26198txunflow(stlport_t *portp, struct tty_struct *tty)
4810{
4811 unsigned char mr0;
4812
4813 mr0 = stl_sc26198getreg(portp, MR0);
4814 stl_sc26198setreg(portp, MR0, (mr0 & ~MR0_SWFRXTX));
4815 stl_sc26198setreg(portp, SCCR, CR_HOSTXON);
4816 stl_sc26198wait(portp);
4817 stl_sc26198setreg(portp, MR0, mr0);
4818 clear_bit(ASYI_TXFLOWED, &portp->istate);
4819}
4820
4821/*****************************************************************************/
4822
4823/*
4824 * Interrupt service routine for sc26198 panels.
4825 */
4826
4827static void stl_sc26198intr(stlpanel_t *panelp, unsigned int iobase)
4828{
4829 stlport_t *portp;
4830 unsigned int iack;
4831
Alan Coxb65b5b52006-06-27 02:54:05 -07004832 spin_lock(&brd_lock);
4833
Linus Torvalds1da177e2005-04-16 15:20:36 -07004834/*
4835 * Work around bug in sc26198 chip... Cannot have A6 address
4836 * line of UART high, else iack will be returned as 0.
4837 */
4838 outb(0, (iobase + 1));
4839
4840 iack = inb(iobase + XP_IACK);
4841 portp = panelp->ports[(iack & IVR_CHANMASK) + ((iobase & 0x4) << 1)];
4842
4843 if (iack & IVR_RXDATA)
4844 stl_sc26198rxisr(portp, iack);
4845 else if (iack & IVR_TXDATA)
4846 stl_sc26198txisr(portp);
4847 else
4848 stl_sc26198otherisr(portp, iack);
Alan Coxb65b5b52006-06-27 02:54:05 -07004849
4850 spin_unlock(&brd_lock);
Linus Torvalds1da177e2005-04-16 15:20:36 -07004851}
4852
4853/*****************************************************************************/
4854
4855/*
4856 * Transmit interrupt handler. This has gotta be fast! Handling TX
4857 * chars is pretty simple, stuff as many as possible from the TX buffer
4858 * into the sc26198 FIFO.
4859 * In practice it is possible that interrupts are enabled but that the
4860 * port has been hung up. Need to handle not having any TX buffer here,
4861 * this is done by using the side effect that head and tail will also
4862 * be NULL if the buffer has been freed.
4863 */
4864
4865static void stl_sc26198txisr(stlport_t *portp)
4866{
4867 unsigned int ioaddr;
4868 unsigned char mr0;
4869 int len, stlen;
4870 char *head, *tail;
4871
4872#ifdef DEBUG
4873 printk("stl_sc26198txisr(portp=%x)\n", (int) portp);
4874#endif
4875
4876 ioaddr = portp->ioaddr;
4877 head = portp->tx.head;
4878 tail = portp->tx.tail;
4879 len = (head >= tail) ? (head - tail) : (STL_TXBUFSIZE - (tail - head));
4880 if ((len == 0) || ((len < STL_TXBUFLOW) &&
4881 (test_bit(ASYI_TXLOW, &portp->istate) == 0))) {
4882 set_bit(ASYI_TXLOW, &portp->istate);
4883 schedule_work(&portp->tqueue);
4884 }
4885
4886 if (len == 0) {
4887 outb((MR0 | portp->uartaddr), (ioaddr + XP_ADDR));
4888 mr0 = inb(ioaddr + XP_DATA);
4889 if ((mr0 & MR0_TXMASK) == MR0_TXEMPTY) {
4890 portp->imr &= ~IR_TXRDY;
4891 outb((IMR | portp->uartaddr), (ioaddr + XP_ADDR));
4892 outb(portp->imr, (ioaddr + XP_DATA));
4893 clear_bit(ASYI_TXBUSY, &portp->istate);
4894 } else {
4895 mr0 |= ((mr0 & ~MR0_TXMASK) | MR0_TXEMPTY);
4896 outb(mr0, (ioaddr + XP_DATA));
4897 }
4898 } else {
4899 len = MIN(len, SC26198_TXFIFOSIZE);
4900 portp->stats.txtotal += len;
4901 stlen = MIN(len, ((portp->tx.buf + STL_TXBUFSIZE) - tail));
4902 outb(GTXFIFO, (ioaddr + XP_ADDR));
4903 outsb((ioaddr + XP_DATA), tail, stlen);
4904 len -= stlen;
4905 tail += stlen;
4906 if (tail >= (portp->tx.buf + STL_TXBUFSIZE))
4907 tail = portp->tx.buf;
4908 if (len > 0) {
4909 outsb((ioaddr + XP_DATA), tail, len);
4910 tail += len;
4911 }
4912 portp->tx.tail = tail;
4913 }
4914}
4915
4916/*****************************************************************************/
4917
4918/*
4919 * Receive character interrupt handler. Determine if we have good chars
4920 * or bad chars and then process appropriately. Good chars are easy
4921 * just shove the lot into the RX buffer and set all status byte to 0.
4922 * If a bad RX char then process as required. This routine needs to be
4923 * fast! In practice it is possible that we get an interrupt on a port
4924 * that is closed. This can happen on hangups - since they completely
4925 * shutdown a port not in user context. Need to handle this case.
4926 */
4927
4928static void stl_sc26198rxisr(stlport_t *portp, unsigned int iack)
4929{
4930 struct tty_struct *tty;
4931 unsigned int len, buflen, ioaddr;
4932
4933#ifdef DEBUG
4934 printk("stl_sc26198rxisr(portp=%x,iack=%x)\n", (int) portp, iack);
4935#endif
4936
4937 tty = portp->tty;
4938 ioaddr = portp->ioaddr;
4939 outb(GIBCR, (ioaddr + XP_ADDR));
4940 len = inb(ioaddr + XP_DATA) + 1;
4941
4942 if ((iack & IVR_TYPEMASK) == IVR_RXDATA) {
Alan Cox33f0f882006-01-09 20:54:13 -08004943 if (tty == NULL || (buflen = tty_buffer_request_room(tty, len)) == 0) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07004944 len = MIN(len, sizeof(stl_unwanted));
4945 outb(GRXFIFO, (ioaddr + XP_ADDR));
4946 insb((ioaddr + XP_DATA), &stl_unwanted[0], len);
4947 portp->stats.rxlost += len;
4948 portp->stats.rxtotal += len;
4949 } else {
4950 len = MIN(len, buflen);
4951 if (len > 0) {
Alan Cox33f0f882006-01-09 20:54:13 -08004952 unsigned char *ptr;
Linus Torvalds1da177e2005-04-16 15:20:36 -07004953 outb(GRXFIFO, (ioaddr + XP_ADDR));
Alan Cox33f0f882006-01-09 20:54:13 -08004954 tty_prepare_flip_string(tty, &ptr, len);
4955 insb((ioaddr + XP_DATA), ptr, len);
Linus Torvalds1da177e2005-04-16 15:20:36 -07004956 tty_schedule_flip(tty);
4957 portp->stats.rxtotal += len;
4958 }
4959 }
4960 } else {
4961 stl_sc26198rxbadchars(portp);
4962 }
4963
4964/*
4965 * If we are TX flow controlled and in IXANY mode then we may need
4966 * to unflow control here. We gotta do this because of the automatic
4967 * flow control modes of the sc26198.
4968 */
4969 if (test_bit(ASYI_TXFLOWED, &portp->istate)) {
4970 if ((tty != (struct tty_struct *) NULL) &&
4971 (tty->termios != (struct termios *) NULL) &&
4972 (tty->termios->c_iflag & IXANY)) {
4973 stl_sc26198txunflow(portp, tty);
4974 }
4975 }
4976}
4977
4978/*****************************************************************************/
4979
4980/*
4981 * Process an RX bad character.
4982 */
4983
4984static inline void stl_sc26198rxbadch(stlport_t *portp, unsigned char status, char ch)
4985{
4986 struct tty_struct *tty;
4987 unsigned int ioaddr;
4988
4989 tty = portp->tty;
4990 ioaddr = portp->ioaddr;
4991
4992 if (status & SR_RXPARITY)
4993 portp->stats.rxparity++;
4994 if (status & SR_RXFRAMING)
4995 portp->stats.rxframing++;
4996 if (status & SR_RXOVERRUN)
4997 portp->stats.rxoverrun++;
4998 if (status & SR_RXBREAK)
4999 portp->stats.rxbreaks++;
5000
5001 if ((tty != (struct tty_struct *) NULL) &&
5002 ((portp->rxignoremsk & status) == 0)) {
5003 if (portp->rxmarkmsk & status) {
5004 if (status & SR_RXBREAK) {
5005 status = TTY_BREAK;
5006 if (portp->flags & ASYNC_SAK) {
5007 do_SAK(tty);
5008 BRDENABLE(portp->brdnr, portp->pagenr);
5009 }
5010 } else if (status & SR_RXPARITY) {
5011 status = TTY_PARITY;
5012 } else if (status & SR_RXFRAMING) {
5013 status = TTY_FRAME;
5014 } else if(status & SR_RXOVERRUN) {
5015 status = TTY_OVERRUN;
5016 } else {
5017 status = 0;
5018 }
5019 } else {
5020 status = 0;
5021 }
5022
Alan Cox33f0f882006-01-09 20:54:13 -08005023 tty_insert_flip_char(tty, ch, status);
5024 tty_schedule_flip(tty);
Linus Torvalds1da177e2005-04-16 15:20:36 -07005025
5026 if (status == 0)
5027 portp->stats.rxtotal++;
5028 }
5029}
5030
5031/*****************************************************************************/
5032
5033/*
5034 * Process all characters in the RX FIFO of the UART. Check all char
5035 * status bytes as well, and process as required. We need to check
5036 * all bytes in the FIFO, in case some more enter the FIFO while we
5037 * are here. To get the exact character error type we need to switch
5038 * into CHAR error mode (that is why we need to make sure we empty
5039 * the FIFO).
5040 */
5041
5042static void stl_sc26198rxbadchars(stlport_t *portp)
5043{
5044 unsigned char status, mr1;
5045 char ch;
5046
5047/*
5048 * To get the precise error type for each character we must switch
5049 * back into CHAR error mode.
5050 */
5051 mr1 = stl_sc26198getreg(portp, MR1);
5052 stl_sc26198setreg(portp, MR1, (mr1 & ~MR1_ERRBLOCK));
5053
5054 while ((status = stl_sc26198getreg(portp, SR)) & SR_RXRDY) {
5055 stl_sc26198setreg(portp, SCCR, CR_CLEARRXERR);
5056 ch = stl_sc26198getreg(portp, RXFIFO);
5057 stl_sc26198rxbadch(portp, status, ch);
5058 }
5059
5060/*
5061 * To get correct interrupt class we must switch back into BLOCK
5062 * error mode.
5063 */
5064 stl_sc26198setreg(portp, MR1, mr1);
5065}
5066
5067/*****************************************************************************/
5068
5069/*
5070 * Other interrupt handler. This includes modem signals, flow
5071 * control actions, etc. Most stuff is left to off-level interrupt
5072 * processing time.
5073 */
5074
5075static void stl_sc26198otherisr(stlport_t *portp, unsigned int iack)
5076{
5077 unsigned char cir, ipr, xisr;
5078
5079#ifdef DEBUG
5080 printk("stl_sc26198otherisr(portp=%x,iack=%x)\n", (int) portp, iack);
5081#endif
5082
5083 cir = stl_sc26198getglobreg(portp, CIR);
5084
5085 switch (cir & CIR_SUBTYPEMASK) {
5086 case CIR_SUBCOS:
5087 ipr = stl_sc26198getreg(portp, IPR);
5088 if (ipr & IPR_DCDCHANGE) {
5089 set_bit(ASYI_DCDCHANGE, &portp->istate);
5090 schedule_work(&portp->tqueue);
5091 portp->stats.modem++;
5092 }
5093 break;
5094 case CIR_SUBXONXOFF:
5095 xisr = stl_sc26198getreg(portp, XISR);
5096 if (xisr & XISR_RXXONGOT) {
5097 set_bit(ASYI_TXFLOWED, &portp->istate);
5098 portp->stats.txxoff++;
5099 }
5100 if (xisr & XISR_RXXOFFGOT) {
5101 clear_bit(ASYI_TXFLOWED, &portp->istate);
5102 portp->stats.txxon++;
5103 }
5104 break;
5105 case CIR_SUBBREAK:
5106 stl_sc26198setreg(portp, SCCR, CR_BREAKRESET);
5107 stl_sc26198rxbadchars(portp);
5108 break;
5109 default:
5110 break;
5111 }
5112}
5113
5114/*****************************************************************************/