blob: 6a1a568ca6498b932c89c5eaeed32142885ebf02 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
Uwe Zeisbergerf30c2262006-10-03 23:01:26 +02002 * linux/drivers/serial/21285.c
Linus Torvalds1da177e2005-04-16 15:20:36 -07003 *
4 * Driver for the serial port on the 21285 StrongArm-110 core logic chip.
5 *
6 * Based on drivers/char/serial.c
7 *
8 * $Id: 21285.c,v 1.37 2002/07/28 10:03:27 rmk Exp $
9 */
Linus Torvalds1da177e2005-04-16 15:20:36 -070010#include <linux/module.h>
11#include <linux/tty.h>
12#include <linux/ioport.h>
13#include <linux/init.h>
14#include <linux/console.h>
15#include <linux/device.h>
16#include <linux/tty_flip.h>
17#include <linux/serial_core.h>
18#include <linux/serial.h>
19
20#include <asm/io.h>
21#include <asm/irq.h>
22#include <asm/mach-types.h>
23#include <asm/hardware/dec21285.h>
24#include <asm/hardware.h>
25
26#define BAUD_BASE (mem_fclk_21285/64)
27
28#define SERIAL_21285_NAME "ttyFB"
29#define SERIAL_21285_MAJOR 204
30#define SERIAL_21285_MINOR 4
31
32#define RXSTAT_DUMMY_READ 0x80000000
33#define RXSTAT_FRAME (1 << 0)
34#define RXSTAT_PARITY (1 << 1)
35#define RXSTAT_OVERRUN (1 << 2)
36#define RXSTAT_ANYERR (RXSTAT_FRAME|RXSTAT_PARITY|RXSTAT_OVERRUN)
37
38#define H_UBRLCR_BREAK (1 << 0)
39#define H_UBRLCR_PARENB (1 << 1)
40#define H_UBRLCR_PAREVN (1 << 2)
41#define H_UBRLCR_STOPB (1 << 3)
42#define H_UBRLCR_FIFO (1 << 4)
43
44static const char serial21285_name[] = "Footbridge UART";
45
46#define tx_enabled(port) ((port)->unused[0])
47#define rx_enabled(port) ((port)->unused[1])
48
49/*
50 * The documented expression for selecting the divisor is:
51 * BAUD_BASE / baud - 1
52 * However, typically BAUD_BASE is not divisible by baud, so
53 * we want to select the divisor that gives us the minimum
54 * error. Therefore, we want:
55 * int(BAUD_BASE / baud - 0.5) ->
56 * int(BAUD_BASE / baud - (baud >> 1) / baud) ->
57 * int((BAUD_BASE - (baud >> 1)) / baud)
58 */
59
Russell Kingb129a8c2005-08-31 10:12:14 +010060static void serial21285_stop_tx(struct uart_port *port)
Linus Torvalds1da177e2005-04-16 15:20:36 -070061{
62 if (tx_enabled(port)) {
63 disable_irq(IRQ_CONTX);
64 tx_enabled(port) = 0;
65 }
66}
67
Russell Kingb129a8c2005-08-31 10:12:14 +010068static void serial21285_start_tx(struct uart_port *port)
Linus Torvalds1da177e2005-04-16 15:20:36 -070069{
70 if (!tx_enabled(port)) {
71 enable_irq(IRQ_CONTX);
72 tx_enabled(port) = 1;
73 }
74}
75
76static void serial21285_stop_rx(struct uart_port *port)
77{
78 if (rx_enabled(port)) {
79 disable_irq(IRQ_CONRX);
80 rx_enabled(port) = 0;
81 }
82}
83
84static void serial21285_enable_ms(struct uart_port *port)
85{
86}
87
David Howells7d12e782006-10-05 14:55:46 +010088static irqreturn_t serial21285_rx_chars(int irq, void *dev_id)
Linus Torvalds1da177e2005-04-16 15:20:36 -070089{
90 struct uart_port *port = dev_id;
91 struct tty_struct *tty = port->info->tty;
92 unsigned int status, ch, flag, rxs, max_count = 256;
93
94 status = *CSR_UARTFLG;
95 while (!(status & 0x10) && max_count--) {
Linus Torvalds1da177e2005-04-16 15:20:36 -070096 ch = *CSR_UARTDR;
97 flag = TTY_NORMAL;
98 port->icount.rx++;
99
100 rxs = *CSR_RXSTAT | RXSTAT_DUMMY_READ;
Russell King45849282005-04-26 15:29:44 +0100101 if (unlikely(rxs & RXSTAT_ANYERR)) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700102 if (rxs & RXSTAT_PARITY)
103 port->icount.parity++;
104 else if (rxs & RXSTAT_FRAME)
105 port->icount.frame++;
106 if (rxs & RXSTAT_OVERRUN)
107 port->icount.overrun++;
108
109 rxs &= port->read_status_mask;
110
111 if (rxs & RXSTAT_PARITY)
112 flag = TTY_PARITY;
113 else if (rxs & RXSTAT_FRAME)
114 flag = TTY_FRAME;
115 }
116
Russell King05ab3012005-05-09 23:21:59 +0100117 uart_insert_char(port, rxs, RXSTAT_OVERRUN, ch, flag);
118
Linus Torvalds1da177e2005-04-16 15:20:36 -0700119 status = *CSR_UARTFLG;
120 }
121 tty_flip_buffer_push(tty);
122
123 return IRQ_HANDLED;
124}
125
David Howells7d12e782006-10-05 14:55:46 +0100126static irqreturn_t serial21285_tx_chars(int irq, void *dev_id)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700127{
128 struct uart_port *port = dev_id;
129 struct circ_buf *xmit = &port->info->xmit;
130 int count = 256;
131
132 if (port->x_char) {
133 *CSR_UARTDR = port->x_char;
134 port->icount.tx++;
135 port->x_char = 0;
136 goto out;
137 }
138 if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
Russell Kingb129a8c2005-08-31 10:12:14 +0100139 serial21285_stop_tx(port);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700140 goto out;
141 }
142
143 do {
144 *CSR_UARTDR = xmit->buf[xmit->tail];
145 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
146 port->icount.tx++;
147 if (uart_circ_empty(xmit))
148 break;
149 } while (--count > 0 && !(*CSR_UARTFLG & 0x20));
150
151 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
152 uart_write_wakeup(port);
153
154 if (uart_circ_empty(xmit))
Russell Kingb129a8c2005-08-31 10:12:14 +0100155 serial21285_stop_tx(port);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700156
157 out:
158 return IRQ_HANDLED;
159}
160
161static unsigned int serial21285_tx_empty(struct uart_port *port)
162{
163 return (*CSR_UARTFLG & 8) ? 0 : TIOCSER_TEMT;
164}
165
166/* no modem control lines */
167static unsigned int serial21285_get_mctrl(struct uart_port *port)
168{
169 return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
170}
171
172static void serial21285_set_mctrl(struct uart_port *port, unsigned int mctrl)
173{
174}
175
176static void serial21285_break_ctl(struct uart_port *port, int break_state)
177{
178 unsigned long flags;
179 unsigned int h_lcr;
180
181 spin_lock_irqsave(&port->lock, flags);
182 h_lcr = *CSR_H_UBRLCR;
183 if (break_state)
184 h_lcr |= H_UBRLCR_BREAK;
185 else
186 h_lcr &= ~H_UBRLCR_BREAK;
187 *CSR_H_UBRLCR = h_lcr;
188 spin_unlock_irqrestore(&port->lock, flags);
189}
190
191static int serial21285_startup(struct uart_port *port)
192{
193 int ret;
194
195 tx_enabled(port) = 1;
196 rx_enabled(port) = 1;
197
198 ret = request_irq(IRQ_CONRX, serial21285_rx_chars, 0,
199 serial21285_name, port);
200 if (ret == 0) {
201 ret = request_irq(IRQ_CONTX, serial21285_tx_chars, 0,
202 serial21285_name, port);
203 if (ret)
204 free_irq(IRQ_CONRX, port);
205 }
206
207 return ret;
208}
209
210static void serial21285_shutdown(struct uart_port *port)
211{
212 free_irq(IRQ_CONTX, port);
213 free_irq(IRQ_CONRX, port);
214}
215
216static void
217serial21285_set_termios(struct uart_port *port, struct termios *termios,
218 struct termios *old)
219{
220 unsigned long flags;
221 unsigned int baud, quot, h_lcr;
222
223 /*
224 * We don't support modem control lines.
225 */
226 termios->c_cflag &= ~(HUPCL | CRTSCTS | CMSPAR);
227 termios->c_cflag |= CLOCAL;
228
229 /*
230 * We don't support BREAK character recognition.
231 */
232 termios->c_iflag &= ~(IGNBRK | BRKINT);
233
234 /*
235 * Ask the core to calculate the divisor for us.
236 */
237 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
238 quot = uart_get_divisor(port, baud);
239
240 switch (termios->c_cflag & CSIZE) {
241 case CS5:
242 h_lcr = 0x00;
243 break;
244 case CS6:
245 h_lcr = 0x20;
246 break;
247 case CS7:
248 h_lcr = 0x40;
249 break;
250 default: /* CS8 */
251 h_lcr = 0x60;
252 break;
253 }
254
255 if (termios->c_cflag & CSTOPB)
256 h_lcr |= H_UBRLCR_STOPB;
257 if (termios->c_cflag & PARENB) {
258 h_lcr |= H_UBRLCR_PARENB;
259 if (!(termios->c_cflag & PARODD))
260 h_lcr |= H_UBRLCR_PAREVN;
261 }
262
263 if (port->fifosize)
264 h_lcr |= H_UBRLCR_FIFO;
265
266 spin_lock_irqsave(&port->lock, flags);
267
268 /*
269 * Update the per-port timeout.
270 */
271 uart_update_timeout(port, termios->c_cflag, baud);
272
273 /*
274 * Which character status flags are we interested in?
275 */
276 port->read_status_mask = RXSTAT_OVERRUN;
277 if (termios->c_iflag & INPCK)
278 port->read_status_mask |= RXSTAT_FRAME | RXSTAT_PARITY;
279
280 /*
281 * Which character status flags should we ignore?
282 */
283 port->ignore_status_mask = 0;
284 if (termios->c_iflag & IGNPAR)
285 port->ignore_status_mask |= RXSTAT_FRAME | RXSTAT_PARITY;
286 if (termios->c_iflag & IGNBRK && termios->c_iflag & IGNPAR)
287 port->ignore_status_mask |= RXSTAT_OVERRUN;
288
289 /*
290 * Ignore all characters if CREAD is not set.
291 */
292 if ((termios->c_cflag & CREAD) == 0)
293 port->ignore_status_mask |= RXSTAT_DUMMY_READ;
294
295 quot -= 1;
296
297 *CSR_UARTCON = 0;
298 *CSR_L_UBRLCR = quot & 0xff;
299 *CSR_M_UBRLCR = (quot >> 8) & 0x0f;
300 *CSR_H_UBRLCR = h_lcr;
301 *CSR_UARTCON = 1;
302
303 spin_unlock_irqrestore(&port->lock, flags);
304}
305
306static const char *serial21285_type(struct uart_port *port)
307{
308 return port->type == PORT_21285 ? "DC21285" : NULL;
309}
310
311static void serial21285_release_port(struct uart_port *port)
312{
313 release_mem_region(port->mapbase, 32);
314}
315
316static int serial21285_request_port(struct uart_port *port)
317{
318 return request_mem_region(port->mapbase, 32, serial21285_name)
319 != NULL ? 0 : -EBUSY;
320}
321
322static void serial21285_config_port(struct uart_port *port, int flags)
323{
324 if (flags & UART_CONFIG_TYPE && serial21285_request_port(port) == 0)
325 port->type = PORT_21285;
326}
327
328/*
329 * verify the new serial_struct (for TIOCSSERIAL).
330 */
331static int serial21285_verify_port(struct uart_port *port, struct serial_struct *ser)
332{
333 int ret = 0;
334 if (ser->type != PORT_UNKNOWN && ser->type != PORT_21285)
335 ret = -EINVAL;
336 if (ser->irq != NO_IRQ)
337 ret = -EINVAL;
338 if (ser->baud_base != port->uartclk / 16)
339 ret = -EINVAL;
340 return ret;
341}
342
343static struct uart_ops serial21285_ops = {
344 .tx_empty = serial21285_tx_empty,
345 .get_mctrl = serial21285_get_mctrl,
346 .set_mctrl = serial21285_set_mctrl,
347 .stop_tx = serial21285_stop_tx,
348 .start_tx = serial21285_start_tx,
349 .stop_rx = serial21285_stop_rx,
350 .enable_ms = serial21285_enable_ms,
351 .break_ctl = serial21285_break_ctl,
352 .startup = serial21285_startup,
353 .shutdown = serial21285_shutdown,
354 .set_termios = serial21285_set_termios,
355 .type = serial21285_type,
356 .release_port = serial21285_release_port,
357 .request_port = serial21285_request_port,
358 .config_port = serial21285_config_port,
359 .verify_port = serial21285_verify_port,
360};
361
362static struct uart_port serial21285_port = {
363 .mapbase = 0x42000160,
Russell King9b4a1612006-02-05 10:48:10 +0000364 .iotype = UPIO_MEM,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700365 .irq = NO_IRQ,
366 .fifosize = 16,
367 .ops = &serial21285_ops,
Russell Kingce8337c2006-01-21 19:28:15 +0000368 .flags = UPF_BOOT_AUTOCONF,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700369};
370
371static void serial21285_setup_ports(void)
372{
373 serial21285_port.uartclk = mem_fclk_21285 / 4;
374}
375
376#ifdef CONFIG_SERIAL_21285_CONSOLE
Russell Kingd3587882006-03-20 20:00:09 +0000377static void serial21285_console_putchar(struct uart_port *port, int ch)
378{
379 while (*CSR_UARTFLG & 0x20)
380 barrier();
381 *CSR_UARTDR = ch;
382}
Linus Torvalds1da177e2005-04-16 15:20:36 -0700383
384static void
385serial21285_console_write(struct console *co, const char *s,
386 unsigned int count)
387{
Russell Kingd3587882006-03-20 20:00:09 +0000388 uart_console_write(&serial21285_port, s, count, serial21285_console_putchar);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700389}
390
391static void __init
392serial21285_get_options(struct uart_port *port, int *baud,
393 int *parity, int *bits)
394{
395 if (*CSR_UARTCON == 1) {
396 unsigned int tmp;
397
398 tmp = *CSR_H_UBRLCR;
399 switch (tmp & 0x60) {
400 case 0x00:
401 *bits = 5;
402 break;
403 case 0x20:
404 *bits = 6;
405 break;
406 case 0x40:
407 *bits = 7;
408 break;
409 default:
410 case 0x60:
411 *bits = 8;
412 break;
413 }
414
415 if (tmp & H_UBRLCR_PARENB) {
416 *parity = 'o';
417 if (tmp & H_UBRLCR_PAREVN)
418 *parity = 'e';
419 }
420
421 tmp = *CSR_L_UBRLCR | (*CSR_M_UBRLCR << 8);
422
423 *baud = port->uartclk / (16 * (tmp + 1));
424 }
425}
426
427static int __init serial21285_console_setup(struct console *co, char *options)
428{
429 struct uart_port *port = &serial21285_port;
430 int baud = 9600;
431 int bits = 8;
432 int parity = 'n';
433 int flow = 'n';
434
435 if (machine_is_personal_server())
436 baud = 57600;
437
438 /*
439 * Check whether an invalid uart number has been specified, and
440 * if so, search for the first available port that does have
441 * console support.
442 */
443 if (options)
444 uart_parse_options(options, &baud, &parity, &bits, &flow);
445 else
446 serial21285_get_options(port, &baud, &parity, &bits);
447
448 return uart_set_options(port, co, baud, parity, bits, flow);
449}
450
Vincent Sanders2d934862005-09-14 22:36:03 +0100451static struct uart_driver serial21285_reg;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700452
453static struct console serial21285_console =
454{
455 .name = SERIAL_21285_NAME,
456 .write = serial21285_console_write,
457 .device = uart_console_device,
458 .setup = serial21285_console_setup,
459 .flags = CON_PRINTBUFFER,
460 .index = -1,
461 .data = &serial21285_reg,
462};
463
464static int __init rs285_console_init(void)
465{
466 serial21285_setup_ports();
467 register_console(&serial21285_console);
468 return 0;
469}
470console_initcall(rs285_console_init);
471
472#define SERIAL_21285_CONSOLE &serial21285_console
473#else
474#define SERIAL_21285_CONSOLE NULL
475#endif
476
477static struct uart_driver serial21285_reg = {
478 .owner = THIS_MODULE,
479 .driver_name = "ttyFB",
480 .dev_name = "ttyFB",
Linus Torvalds1da177e2005-04-16 15:20:36 -0700481 .major = SERIAL_21285_MAJOR,
482 .minor = SERIAL_21285_MINOR,
483 .nr = 1,
484 .cons = SERIAL_21285_CONSOLE,
485};
486
487static int __init serial21285_init(void)
488{
489 int ret;
490
491 printk(KERN_INFO "Serial: 21285 driver $Revision: 1.37 $\n");
492
493 serial21285_setup_ports();
494
495 ret = uart_register_driver(&serial21285_reg);
496 if (ret == 0)
497 uart_add_one_port(&serial21285_reg, &serial21285_port);
498
499 return ret;
500}
501
502static void __exit serial21285_exit(void)
503{
504 uart_remove_one_port(&serial21285_reg, &serial21285_port);
505 uart_unregister_driver(&serial21285_reg);
506}
507
508module_init(serial21285_init);
509module_exit(serial21285_exit);
510
511MODULE_LICENSE("GPL");
512MODULE_DESCRIPTION("Intel Footbridge (21285) serial driver $Revision: 1.37 $");
513MODULE_ALIAS_CHARDEV(SERIAL_21285_MAJOR, SERIAL_21285_MINOR);