blob: be207f7156fe0298d7dd9547a415dd9918d0cf70 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001#define SUSBCRequest_SetBaudRateParityAndStopBits 1
2#define SUSBCR_SBR_MASK 0xFF00
3#define SUSBCR_SBR_1200 0x0100
4#define SUSBCR_SBR_9600 0x0200
5#define SUSBCR_SBR_19200 0x0400
6#define SUSBCR_SBR_28800 0x0800
7#define SUSBCR_SBR_38400 0x1000
8#define SUSBCR_SBR_57600 0x2000
9#define SUSBCR_SBR_115200 0x4000
10
11#define SUSBCR_SPASB_MASK 0x0070
12#define SUSBCR_SPASB_NoParity 0x0010
13#define SUSBCR_SPASB_OddParity 0x0020
14#define SUSBCR_SPASB_EvenParity 0x0040
15
16#define SUSBCR_SPASB_STPMASK 0x0003
17#define SUSBCR_SPASB_1StopBit 0x0001
18#define SUSBCR_SPASB_2StopBits 0x0002
19
20#define SUSBCRequest_SetStatusLinesOrQueues 2
21#define SUSBCR_SSL_SETRTS 0x0001
22#define SUSBCR_SSL_CLRRTS 0x0002
23#define SUSBCR_SSL_SETDTR 0x0004
24#define SUSBCR_SSL_CLRDTR 0x0010
25
Greg Kroah-Hartmane4582b62010-05-17 10:33:41 -070026/* Kill the pending/current writes to the comm port. */
27#define SUSBCR_SSL_PURGE_TXABORT 0x0100
28/* Kill the pending/current reads to the comm port. */
29#define SUSBCR_SSL_PURGE_RXABORT 0x0200
30/* Kill the transmit queue if there. */
31#define SUSBCR_SSL_PURGE_TXCLEAR 0x0400
32/* Kill the typeahead buffer if there. */
33#define SUSBCR_SSL_PURGE_RXCLEAR 0x0800
Linus Torvalds1da177e2005-04-16 15:20:36 -070034
35#define SUSBCRequest_GetStatusLineState 4
Greg Kroah-Hartmane4582b62010-05-17 10:33:41 -070036/* Any Character received */
37#define SUSBCR_GSL_RXCHAR 0x0001
38/* Transmitt Queue Empty */
39#define SUSBCR_GSL_TXEMPTY 0x0004
40/* CTS changed state */
41#define SUSBCR_GSL_CTS 0x0008
42/* DSR changed state */
43#define SUSBCR_GSL_DSR 0x0010
44/* RLSD changed state */
45#define SUSBCR_GSL_RLSD 0x0020
46/* BREAK received */
47#define SUSBCR_GSL_BREAK 0x0040
48/* Line status error occurred */
49#define SUSBCR_GSL_ERR 0x0080
50/* Ring signal detected */
51#define SUSBCR_GSL_RING 0x0100
Linus Torvalds1da177e2005-04-16 15:20:36 -070052
53#define SUSBCRequest_Misc 8
Greg Kroah-Hartmane4582b62010-05-17 10:33:41 -070054/* use a predefined reset sequence */
55#define SUSBCR_MSC_ResetReader 0x0001
56/* use a predefined sequence to reset the internal queues */
57#define SUSBCR_MSC_ResetAllQueues 0x0002
Linus Torvalds1da177e2005-04-16 15:20:36 -070058
59#define SUSBCRequest_GetMisc 0x10
Linus Torvalds1da177e2005-04-16 15:20:36 -070060
Greg Kroah-Hartmane4582b62010-05-17 10:33:41 -070061/*
62 * get the firmware version from device, coded like this 0xHHLLBBPP with
63 * HH = Firmware Version High Byte
64 * LL = Firmware Version Low Byte
65 * BB = Build Number
66 * PP = Further Attributes
67 */
68#define SUSBCR_MSC_GetFWVersion 0x0001
69
70/*
71 * get the hardware version from device coded like this 0xHHLLPPRR with
72 * HH = Software Version High Byte
73 * LL = Software Version Low Byte
74 * PP = Further Attributes
75 * RR = Reserved for the hardware ID
76 */
77#define SUSBCR_MSC_GetHWVersion 0x0002