blob: bcc9f448ec4e6d763504c31a5b02cf4c2514d59d [file] [log] [blame]
Johannes Berg704232c2007-04-23 12:20:05 -07001#ifndef __NET_CFG80211_H
2#define __NET_CFG80211_H
Johannes Bergd3236552009-04-20 14:31:42 +02003/*
4 * 802.11 device and configuration interface
5 *
Jouni Malinen026331c2010-02-15 12:53:10 +02006 * Copyright 2006-2010 Johannes Berg <johannes@sipsolutions.net>
Johannes Bergd3236552009-04-20 14:31:42 +02007 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
11 */
Johannes Berg704232c2007-04-23 12:20:05 -070012
Johannes Bergd3236552009-04-20 14:31:42 +020013#include <linux/netdevice.h>
14#include <linux/debugfs.h>
15#include <linux/list.h>
Johannes Berg704232c2007-04-23 12:20:05 -070016#include <linux/netlink.h>
17#include <linux/skbuff.h>
Johannes Berg55682962007-09-20 13:09:35 -040018#include <linux/nl80211.h>
Johannes Berg2a519312009-02-10 21:25:55 +010019#include <linux/if_ether.h>
20#include <linux/ieee80211.h>
Johannes Bergd3236552009-04-20 14:31:42 +020021#include <net/regulatory.h>
22
Johannes Bergfee52672008-11-26 22:36:31 +010023/* remove once we remove the wext stuff */
Johannes Bergd3236552009-04-20 14:31:42 +020024#include <net/iw_handler.h>
25#include <linux/wireless.h>
26
Johannes Berg704232c2007-04-23 12:20:05 -070027
Johannes Bergd70e9692010-08-19 16:11:27 +020028/**
29 * DOC: Introduction
30 *
31 * cfg80211 is the configuration API for 802.11 devices in Linux. It bridges
32 * userspace and drivers, and offers some utility functionality associated
33 * with 802.11. cfg80211 must, directly or indirectly via mac80211, be used
34 * by all modern wireless drivers in Linux, so that they offer a consistent
35 * API through nl80211. For backward compatibility, cfg80211 also offers
36 * wireless extensions to userspace, but hides them from drivers completely.
37 *
38 * Additionally, cfg80211 contains code to help enforce regulatory spectrum
39 * use restrictions.
40 */
41
42
43/**
44 * DOC: Device registration
45 *
46 * In order for a driver to use cfg80211, it must register the hardware device
47 * with cfg80211. This happens through a number of hardware capability structs
48 * described below.
49 *
50 * The fundamental structure for each device is the 'wiphy', of which each
51 * instance describes a physical wireless device connected to the system. Each
52 * such wiphy can have zero, one, or many virtual interfaces associated with
53 * it, which need to be identified as such by pointing the network interface's
54 * @ieee80211_ptr pointer to a &struct wireless_dev which further describes
55 * the wireless part of the interface, normally this struct is embedded in the
56 * network interface's private data area. Drivers can optionally allow creating
57 * or destroying virtual interfaces on the fly, but without at least one or the
58 * ability to create some the wireless device isn't useful.
59 *
60 * Each wiphy structure contains device capability information, and also has
61 * a pointer to the various operations the driver offers. The definitions and
62 * structures here describe these capabilities in detail.
63 */
64
Johannes Berg704232c2007-04-23 12:20:05 -070065/*
Johannes Bergd3236552009-04-20 14:31:42 +020066 * wireless hardware capability structures
67 */
68
69/**
70 * enum ieee80211_band - supported frequency bands
Johannes Berg704232c2007-04-23 12:20:05 -070071 *
Johannes Bergd3236552009-04-20 14:31:42 +020072 * The bands are assigned this way because the supported
73 * bitrates differ in these bands.
74 *
75 * @IEEE80211_BAND_2GHZ: 2.4GHz ISM band
76 * @IEEE80211_BAND_5GHZ: around 5GHz band (4.9-5.7)
Johannes Bergabe37c42010-06-07 11:12:27 +020077 * @IEEE80211_NUM_BANDS: number of defined bands
Johannes Bergd3236552009-04-20 14:31:42 +020078 */
79enum ieee80211_band {
Jouni Malinen13ae75b2009-12-29 12:59:45 +020080 IEEE80211_BAND_2GHZ = NL80211_BAND_2GHZ,
81 IEEE80211_BAND_5GHZ = NL80211_BAND_5GHZ,
Johannes Bergd3236552009-04-20 14:31:42 +020082
83 /* keep last */
84 IEEE80211_NUM_BANDS
85};
86
87/**
88 * enum ieee80211_channel_flags - channel flags
89 *
90 * Channel flags set by the regulatory control code.
91 *
92 * @IEEE80211_CHAN_DISABLED: This channel is disabled.
93 * @IEEE80211_CHAN_PASSIVE_SCAN: Only passive scanning is permitted
94 * on this channel.
95 * @IEEE80211_CHAN_NO_IBSS: IBSS is not allowed on this channel.
96 * @IEEE80211_CHAN_RADAR: Radar detection is required on this channel.
Luis R. Rodriguez689da1b2009-05-02 00:37:18 -040097 * @IEEE80211_CHAN_NO_HT40PLUS: extension channel above this channel
Johannes Bergd3236552009-04-20 14:31:42 +020098 * is not permitted.
Luis R. Rodriguez689da1b2009-05-02 00:37:18 -040099 * @IEEE80211_CHAN_NO_HT40MINUS: extension channel below this channel
Johannes Bergd3236552009-04-20 14:31:42 +0200100 * is not permitted.
101 */
102enum ieee80211_channel_flags {
103 IEEE80211_CHAN_DISABLED = 1<<0,
104 IEEE80211_CHAN_PASSIVE_SCAN = 1<<1,
105 IEEE80211_CHAN_NO_IBSS = 1<<2,
106 IEEE80211_CHAN_RADAR = 1<<3,
Luis R. Rodriguez689da1b2009-05-02 00:37:18 -0400107 IEEE80211_CHAN_NO_HT40PLUS = 1<<4,
108 IEEE80211_CHAN_NO_HT40MINUS = 1<<5,
Johannes Bergd3236552009-04-20 14:31:42 +0200109};
110
Luis R. Rodriguez038659e2009-05-02 00:37:17 -0400111#define IEEE80211_CHAN_NO_HT40 \
Luis R. Rodriguez689da1b2009-05-02 00:37:18 -0400112 (IEEE80211_CHAN_NO_HT40PLUS | IEEE80211_CHAN_NO_HT40MINUS)
Luis R. Rodriguez038659e2009-05-02 00:37:17 -0400113
Johannes Bergd3236552009-04-20 14:31:42 +0200114/**
115 * struct ieee80211_channel - channel definition
116 *
117 * This structure describes a single channel for use
118 * with cfg80211.
119 *
120 * @center_freq: center frequency in MHz
Johannes Bergd3236552009-04-20 14:31:42 +0200121 * @hw_value: hardware-specific value for the channel
122 * @flags: channel flags from &enum ieee80211_channel_flags.
123 * @orig_flags: channel flags at registration time, used by regulatory
124 * code to support devices with additional restrictions
125 * @band: band this channel belongs to.
126 * @max_antenna_gain: maximum antenna gain in dBi
127 * @max_power: maximum transmission power (in dBm)
128 * @beacon_found: helper to regulatory code to indicate when a beacon
129 * has been found on this channel. Use regulatory_hint_found_beacon()
Walter Goldens77c20612010-05-18 04:44:54 -0700130 * to enable this, this is useful only on 5 GHz band.
Johannes Bergd3236552009-04-20 14:31:42 +0200131 * @orig_mag: internal use
132 * @orig_mpwr: internal use
133 */
134struct ieee80211_channel {
135 enum ieee80211_band band;
136 u16 center_freq;
Johannes Bergd3236552009-04-20 14:31:42 +0200137 u16 hw_value;
138 u32 flags;
139 int max_antenna_gain;
140 int max_power;
141 bool beacon_found;
142 u32 orig_flags;
143 int orig_mag, orig_mpwr;
144};
145
146/**
147 * enum ieee80211_rate_flags - rate flags
148 *
149 * Hardware/specification flags for rates. These are structured
150 * in a way that allows using the same bitrate structure for
151 * different bands/PHY modes.
152 *
153 * @IEEE80211_RATE_SHORT_PREAMBLE: Hardware can send with short
154 * preamble on this bitrate; only relevant in 2.4GHz band and
155 * with CCK rates.
156 * @IEEE80211_RATE_MANDATORY_A: This bitrate is a mandatory rate
157 * when used with 802.11a (on the 5 GHz band); filled by the
158 * core code when registering the wiphy.
159 * @IEEE80211_RATE_MANDATORY_B: This bitrate is a mandatory rate
160 * when used with 802.11b (on the 2.4 GHz band); filled by the
161 * core code when registering the wiphy.
162 * @IEEE80211_RATE_MANDATORY_G: This bitrate is a mandatory rate
163 * when used with 802.11g (on the 2.4 GHz band); filled by the
164 * core code when registering the wiphy.
165 * @IEEE80211_RATE_ERP_G: This is an ERP rate in 802.11g mode.
166 */
167enum ieee80211_rate_flags {
168 IEEE80211_RATE_SHORT_PREAMBLE = 1<<0,
169 IEEE80211_RATE_MANDATORY_A = 1<<1,
170 IEEE80211_RATE_MANDATORY_B = 1<<2,
171 IEEE80211_RATE_MANDATORY_G = 1<<3,
172 IEEE80211_RATE_ERP_G = 1<<4,
173};
174
175/**
176 * struct ieee80211_rate - bitrate definition
177 *
178 * This structure describes a bitrate that an 802.11 PHY can
179 * operate with. The two values @hw_value and @hw_value_short
180 * are only for driver use when pointers to this structure are
181 * passed around.
182 *
183 * @flags: rate-specific flags
184 * @bitrate: bitrate in units of 100 Kbps
185 * @hw_value: driver/hardware value for this rate
186 * @hw_value_short: driver/hardware value for this rate when
187 * short preamble is used
188 */
189struct ieee80211_rate {
190 u32 flags;
191 u16 bitrate;
192 u16 hw_value, hw_value_short;
193};
194
195/**
196 * struct ieee80211_sta_ht_cap - STA's HT capabilities
197 *
198 * This structure describes most essential parameters needed
199 * to describe 802.11n HT capabilities for an STA.
200 *
201 * @ht_supported: is HT supported by the STA
202 * @cap: HT capabilities map as described in 802.11n spec
203 * @ampdu_factor: Maximum A-MPDU length factor
204 * @ampdu_density: Minimum A-MPDU spacing
205 * @mcs: Supported MCS rates
206 */
207struct ieee80211_sta_ht_cap {
208 u16 cap; /* use IEEE80211_HT_CAP_ */
209 bool ht_supported;
210 u8 ampdu_factor;
211 u8 ampdu_density;
212 struct ieee80211_mcs_info mcs;
213};
214
215/**
216 * struct ieee80211_supported_band - frequency band definition
217 *
218 * This structure describes a frequency band a wiphy
219 * is able to operate in.
220 *
221 * @channels: Array of channels the hardware can operate in
222 * in this band.
223 * @band: the band this structure represents
224 * @n_channels: Number of channels in @channels
225 * @bitrates: Array of bitrates the hardware can operate with
226 * in this band. Must be sorted to give a valid "supported
227 * rates" IE, i.e. CCK rates first, then OFDM.
228 * @n_bitrates: Number of bitrates in @bitrates
Johannes Bergabe37c42010-06-07 11:12:27 +0200229 * @ht_cap: HT capabilities in this band
Johannes Bergd3236552009-04-20 14:31:42 +0200230 */
231struct ieee80211_supported_band {
232 struct ieee80211_channel *channels;
233 struct ieee80211_rate *bitrates;
234 enum ieee80211_band band;
235 int n_channels;
236 int n_bitrates;
237 struct ieee80211_sta_ht_cap ht_cap;
238};
239
240/*
241 * Wireless hardware/device configuration structures and methods
Johannes Berg704232c2007-04-23 12:20:05 -0700242 */
243
Luis Carlos Cobo2ec600d2008-02-23 15:17:06 +0100244/**
Johannes Bergd70e9692010-08-19 16:11:27 +0200245 * DOC: Actions and configuration
246 *
247 * Each wireless device and each virtual interface offer a set of configuration
248 * operations and other actions that are invoked by userspace. Each of these
249 * actions is described in the operations structure, and the parameters these
250 * operations use are described separately.
251 *
252 * Additionally, some operations are asynchronous and expect to get status
253 * information via some functions that drivers need to call.
254 *
255 * Scanning and BSS list handling with its associated functionality is described
256 * in a separate chapter.
257 */
258
259/**
Luis Carlos Cobo2ec600d2008-02-23 15:17:06 +0100260 * struct vif_params - describes virtual interface parameters
Felix Fietkau8b787642009-11-10 18:53:10 +0100261 * @use_4addr: use 4-address frames
Luis Carlos Cobo2ec600d2008-02-23 15:17:06 +0100262 */
263struct vif_params {
Felix Fietkau8b787642009-11-10 18:53:10 +0100264 int use_4addr;
Luis Carlos Cobo2ec600d2008-02-23 15:17:06 +0100265};
266
Andy Green179f8312007-07-10 19:29:38 +0200267/**
Johannes Berg41ade002007-12-19 02:03:29 +0100268 * struct key_params - key information
269 *
270 * Information about a key
271 *
272 * @key: key material
273 * @key_len: length of key material
274 * @cipher: cipher suite selector
275 * @seq: sequence counter (IV/PN) for TKIP and CCMP keys, only used
276 * with the get_key() callback, must be in little endian,
277 * length given by @seq_len.
Johannes Bergabe37c42010-06-07 11:12:27 +0200278 * @seq_len: length of @seq.
Johannes Berg41ade002007-12-19 02:03:29 +0100279 */
280struct key_params {
281 u8 *key;
282 u8 *seq;
283 int key_len;
284 int seq_len;
285 u32 cipher;
286};
287
Johannes Berged1b6cc2007-12-19 02:03:32 +0100288/**
Holger Schurig61fa7132009-11-11 12:25:40 +0100289 * enum survey_info_flags - survey information flags
290 *
Johannes Bergabe37c42010-06-07 11:12:27 +0200291 * @SURVEY_INFO_NOISE_DBM: noise (in dBm) was filled in
Felix Fietkau17e5a802010-09-29 17:15:30 +0200292 * @SURVEY_INFO_IN_USE: channel is currently being used
Felix Fietkau8610c292010-10-09 02:39:29 +0200293 * @SURVEY_INFO_CHANNEL_TIME: channel active time (in ms) was filled in
294 * @SURVEY_INFO_CHANNEL_TIME_BUSY: channel busy time was filled in
295 * @SURVEY_INFO_CHANNEL_TIME_EXT_BUSY: extension channel busy time was filled in
296 * @SURVEY_INFO_CHANNEL_TIME_RX: channel receive time was filled in
297 * @SURVEY_INFO_CHANNEL_TIME_TX: channel transmit time was filled in
Johannes Bergabe37c42010-06-07 11:12:27 +0200298 *
Holger Schurig61fa7132009-11-11 12:25:40 +0100299 * Used by the driver to indicate which info in &struct survey_info
300 * it has filled in during the get_survey().
301 */
302enum survey_info_flags {
303 SURVEY_INFO_NOISE_DBM = 1<<0,
Felix Fietkau17e5a802010-09-29 17:15:30 +0200304 SURVEY_INFO_IN_USE = 1<<1,
Felix Fietkau8610c292010-10-09 02:39:29 +0200305 SURVEY_INFO_CHANNEL_TIME = 1<<2,
306 SURVEY_INFO_CHANNEL_TIME_BUSY = 1<<3,
307 SURVEY_INFO_CHANNEL_TIME_EXT_BUSY = 1<<4,
308 SURVEY_INFO_CHANNEL_TIME_RX = 1<<5,
309 SURVEY_INFO_CHANNEL_TIME_TX = 1<<6,
Holger Schurig61fa7132009-11-11 12:25:40 +0100310};
311
312/**
313 * struct survey_info - channel survey response
314 *
Holger Schurig61fa7132009-11-11 12:25:40 +0100315 * @channel: the channel this survey record reports, mandatory
316 * @filled: bitflag of flags from &enum survey_info_flags
317 * @noise: channel noise in dBm. This and all following fields are
318 * optional
Felix Fietkau8610c292010-10-09 02:39:29 +0200319 * @channel_time: amount of time in ms the radio spent on the channel
320 * @channel_time_busy: amount of time the primary channel was sensed busy
321 * @channel_time_ext_busy: amount of time the extension channel was sensed busy
322 * @channel_time_rx: amount of time the radio spent receiving data
323 * @channel_time_tx: amount of time the radio spent transmitting data
Holger Schurig61fa7132009-11-11 12:25:40 +0100324 *
Johannes Bergabe37c42010-06-07 11:12:27 +0200325 * Used by dump_survey() to report back per-channel survey information.
326 *
Holger Schurig61fa7132009-11-11 12:25:40 +0100327 * This structure can later be expanded with things like
328 * channel duty cycle etc.
329 */
330struct survey_info {
331 struct ieee80211_channel *channel;
Felix Fietkau8610c292010-10-09 02:39:29 +0200332 u64 channel_time;
333 u64 channel_time_busy;
334 u64 channel_time_ext_busy;
335 u64 channel_time_rx;
336 u64 channel_time_tx;
Holger Schurig61fa7132009-11-11 12:25:40 +0100337 u32 filled;
338 s8 noise;
339};
340
341/**
Johannes Berged1b6cc2007-12-19 02:03:32 +0100342 * struct beacon_parameters - beacon parameters
343 *
344 * Used to configure the beacon for an interface.
345 *
346 * @head: head portion of beacon (before TIM IE)
347 * or %NULL if not changed
348 * @tail: tail portion of beacon (after TIM IE)
349 * or %NULL if not changed
350 * @interval: beacon interval or zero if not changed
351 * @dtim_period: DTIM period or zero if not changed
352 * @head_len: length of @head
353 * @tail_len: length of @tail
354 */
355struct beacon_parameters {
356 u8 *head, *tail;
357 int interval, dtim_period;
358 int head_len, tail_len;
359};
360
Johannes Berg5727ef12007-12-19 02:03:34 +0100361/**
Luis Carlos Cobo2ec600d2008-02-23 15:17:06 +0100362 * enum plink_action - actions to perform in mesh peers
363 *
364 * @PLINK_ACTION_INVALID: action 0 is reserved
365 * @PLINK_ACTION_OPEN: start mesh peer link establishment
Johannes Bergabe37c42010-06-07 11:12:27 +0200366 * @PLINK_ACTION_BLOCK: block traffic from this mesh peer
Luis Carlos Cobo2ec600d2008-02-23 15:17:06 +0100367 */
368enum plink_actions {
369 PLINK_ACTION_INVALID,
370 PLINK_ACTION_OPEN,
371 PLINK_ACTION_BLOCK,
372};
373
374/**
Johannes Berg5727ef12007-12-19 02:03:34 +0100375 * struct station_parameters - station parameters
376 *
377 * Used to change and create a new station.
378 *
379 * @vlan: vlan interface station should belong to
380 * @supported_rates: supported rates in IEEE 802.11 format
381 * (or NULL for no change)
382 * @supported_rates_len: number of supported rates
Johannes Bergeccb8e82009-05-11 21:57:56 +0300383 * @sta_flags_mask: station flags that changed
384 * (bitmask of BIT(NL80211_STA_FLAG_...))
385 * @sta_flags_set: station flags values
386 * (bitmask of BIT(NL80211_STA_FLAG_...))
Johannes Berg5727ef12007-12-19 02:03:34 +0100387 * @listen_interval: listen interval or -1 for no change
388 * @aid: AID or zero for no change
Johannes Bergabe37c42010-06-07 11:12:27 +0200389 * @plink_action: plink action to take
390 * @ht_capa: HT capabilities of station
Johannes Berg5727ef12007-12-19 02:03:34 +0100391 */
392struct station_parameters {
393 u8 *supported_rates;
394 struct net_device *vlan;
Johannes Bergeccb8e82009-05-11 21:57:56 +0300395 u32 sta_flags_mask, sta_flags_set;
Johannes Berg5727ef12007-12-19 02:03:34 +0100396 int listen_interval;
397 u16 aid;
398 u8 supported_rates_len;
Luis Carlos Cobo2ec600d2008-02-23 15:17:06 +0100399 u8 plink_action;
Jouni Malinen36aedc902008-08-25 11:58:58 +0300400 struct ieee80211_ht_cap *ht_capa;
Johannes Berg5727ef12007-12-19 02:03:34 +0100401};
402
Johannes Bergfd5b74d2007-12-19 02:03:36 +0100403/**
Luis Carlos Cobo2ec600d2008-02-23 15:17:06 +0100404 * enum station_info_flags - station information flags
Johannes Bergfd5b74d2007-12-19 02:03:36 +0100405 *
Luis Carlos Cobo2ec600d2008-02-23 15:17:06 +0100406 * Used by the driver to indicate which info in &struct station_info
407 * it has filled in during get_station() or dump_station().
Johannes Bergfd5b74d2007-12-19 02:03:36 +0100408 *
Luis Carlos Cobo2ec600d2008-02-23 15:17:06 +0100409 * @STATION_INFO_INACTIVE_TIME: @inactive_time filled
410 * @STATION_INFO_RX_BYTES: @rx_bytes filled
411 * @STATION_INFO_TX_BYTES: @tx_bytes filled
412 * @STATION_INFO_LLID: @llid filled
413 * @STATION_INFO_PLID: @plid filled
414 * @STATION_INFO_PLINK_STATE: @plink_state filled
Henning Rogge420e7fa2008-12-11 22:04:19 +0100415 * @STATION_INFO_SIGNAL: @signal filled
416 * @STATION_INFO_TX_BITRATE: @tx_bitrate fields are filled
417 * (tx_bitrate, tx_bitrate_flags and tx_bitrate_mcs)
Jouni Malinen98c8a60a2009-02-17 13:24:57 +0200418 * @STATION_INFO_RX_PACKETS: @rx_packets filled
419 * @STATION_INFO_TX_PACKETS: @tx_packets filled
Bruno Randolfb206b4e2010-10-06 18:34:12 +0900420 * @STATION_INFO_TX_RETRIES: @tx_retries filled
421 * @STATION_INFO_TX_FAILED: @tx_failed filled
Ben Greear5a5c7312010-10-07 16:39:20 -0700422 * @STATION_INFO_RX_DROP_MISC: @rx_dropped_misc filled
Bruno Randolf541a45a2010-12-02 19:12:43 +0900423 * @STATION_INFO_SIGNAL_AVG: @signal_avg filled
Johannes Bergfd5b74d2007-12-19 02:03:36 +0100424 */
Luis Carlos Cobo2ec600d2008-02-23 15:17:06 +0100425enum station_info_flags {
426 STATION_INFO_INACTIVE_TIME = 1<<0,
427 STATION_INFO_RX_BYTES = 1<<1,
428 STATION_INFO_TX_BYTES = 1<<2,
429 STATION_INFO_LLID = 1<<3,
430 STATION_INFO_PLID = 1<<4,
431 STATION_INFO_PLINK_STATE = 1<<5,
Henning Rogge420e7fa2008-12-11 22:04:19 +0100432 STATION_INFO_SIGNAL = 1<<6,
433 STATION_INFO_TX_BITRATE = 1<<7,
Jouni Malinen98c8a60a2009-02-17 13:24:57 +0200434 STATION_INFO_RX_PACKETS = 1<<8,
435 STATION_INFO_TX_PACKETS = 1<<9,
Bruno Randolfb206b4e2010-10-06 18:34:12 +0900436 STATION_INFO_TX_RETRIES = 1<<10,
437 STATION_INFO_TX_FAILED = 1<<11,
Ben Greear5a5c7312010-10-07 16:39:20 -0700438 STATION_INFO_RX_DROP_MISC = 1<<12,
Bruno Randolf541a45a2010-12-02 19:12:43 +0900439 STATION_INFO_SIGNAL_AVG = 1<<13,
Henning Rogge420e7fa2008-12-11 22:04:19 +0100440};
441
442/**
443 * enum station_info_rate_flags - bitrate info flags
444 *
445 * Used by the driver to indicate the specific rate transmission
446 * type for 802.11n transmissions.
447 *
448 * @RATE_INFO_FLAGS_MCS: @tx_bitrate_mcs filled
449 * @RATE_INFO_FLAGS_40_MHZ_WIDTH: 40 Mhz width transmission
450 * @RATE_INFO_FLAGS_SHORT_GI: 400ns guard interval
451 */
452enum rate_info_flags {
453 RATE_INFO_FLAGS_MCS = 1<<0,
454 RATE_INFO_FLAGS_40_MHZ_WIDTH = 1<<1,
455 RATE_INFO_FLAGS_SHORT_GI = 1<<2,
456};
457
458/**
459 * struct rate_info - bitrate information
460 *
461 * Information about a receiving or transmitting bitrate
462 *
463 * @flags: bitflag of flags from &enum rate_info_flags
464 * @mcs: mcs index if struct describes a 802.11n bitrate
465 * @legacy: bitrate in 100kbit/s for 802.11abg
466 */
467struct rate_info {
468 u8 flags;
469 u8 mcs;
470 u16 legacy;
Johannes Bergfd5b74d2007-12-19 02:03:36 +0100471};
472
473/**
Luis Carlos Cobo2ec600d2008-02-23 15:17:06 +0100474 * struct station_info - station information
Johannes Bergfd5b74d2007-12-19 02:03:36 +0100475 *
Luis Carlos Cobo2ec600d2008-02-23 15:17:06 +0100476 * Station information filled by driver for get_station() and dump_station.
Johannes Bergfd5b74d2007-12-19 02:03:36 +0100477 *
Luis Carlos Cobo2ec600d2008-02-23 15:17:06 +0100478 * @filled: bitflag of flags from &enum station_info_flags
Johannes Bergfd5b74d2007-12-19 02:03:36 +0100479 * @inactive_time: time since last station activity (tx/rx) in milliseconds
480 * @rx_bytes: bytes received from this station
481 * @tx_bytes: bytes transmitted to this station
Luis Carlos Cobo2ec600d2008-02-23 15:17:06 +0100482 * @llid: mesh local link id
483 * @plid: mesh peer link id
484 * @plink_state: mesh peer link state
Henning Rogge420e7fa2008-12-11 22:04:19 +0100485 * @signal: signal strength of last received packet in dBm
Bruno Randolf541a45a2010-12-02 19:12:43 +0900486 * @signal_avg: signal strength average in dBm
Henning Rogge420e7fa2008-12-11 22:04:19 +0100487 * @txrate: current unicast bitrate to this station
Jouni Malinen98c8a60a2009-02-17 13:24:57 +0200488 * @rx_packets: packets received from this station
489 * @tx_packets: packets transmitted to this station
Bruno Randolfb206b4e2010-10-06 18:34:12 +0900490 * @tx_retries: cumulative retry counts
491 * @tx_failed: number of failed transmissions (retries exceeded, no ACK)
Ben Greear5a5c7312010-10-07 16:39:20 -0700492 * @rx_dropped_misc: Dropped for un-specified reason.
Johannes Bergf5ea9122009-08-07 16:17:38 +0200493 * @generation: generation number for nl80211 dumps.
494 * This number should increase every time the list of stations
495 * changes, i.e. when a station is added or removed, so that
496 * userspace can tell whether it got a consistent snapshot.
Johannes Bergfd5b74d2007-12-19 02:03:36 +0100497 */
Luis Carlos Cobo2ec600d2008-02-23 15:17:06 +0100498struct station_info {
Johannes Bergfd5b74d2007-12-19 02:03:36 +0100499 u32 filled;
500 u32 inactive_time;
501 u32 rx_bytes;
502 u32 tx_bytes;
Luis Carlos Cobo2ec600d2008-02-23 15:17:06 +0100503 u16 llid;
504 u16 plid;
505 u8 plink_state;
Henning Rogge420e7fa2008-12-11 22:04:19 +0100506 s8 signal;
Bruno Randolf541a45a2010-12-02 19:12:43 +0900507 s8 signal_avg;
Henning Rogge420e7fa2008-12-11 22:04:19 +0100508 struct rate_info txrate;
Jouni Malinen98c8a60a2009-02-17 13:24:57 +0200509 u32 rx_packets;
510 u32 tx_packets;
Bruno Randolfb206b4e2010-10-06 18:34:12 +0900511 u32 tx_retries;
512 u32 tx_failed;
Ben Greear5a5c7312010-10-07 16:39:20 -0700513 u32 rx_dropped_misc;
Johannes Bergf5ea9122009-08-07 16:17:38 +0200514
515 int generation;
Johannes Bergfd5b74d2007-12-19 02:03:36 +0100516};
517
Michael Wu66f7ac52008-01-31 19:48:22 +0100518/**
519 * enum monitor_flags - monitor flags
520 *
521 * Monitor interface configuration flags. Note that these must be the bits
522 * according to the nl80211 flags.
523 *
524 * @MONITOR_FLAG_FCSFAIL: pass frames with bad FCS
525 * @MONITOR_FLAG_PLCPFAIL: pass frames with bad PLCP
526 * @MONITOR_FLAG_CONTROL: pass control frames
527 * @MONITOR_FLAG_OTHER_BSS: disable BSSID filtering
528 * @MONITOR_FLAG_COOK_FRAMES: report frames after processing
529 */
530enum monitor_flags {
531 MONITOR_FLAG_FCSFAIL = 1<<NL80211_MNTR_FLAG_FCSFAIL,
532 MONITOR_FLAG_PLCPFAIL = 1<<NL80211_MNTR_FLAG_PLCPFAIL,
533 MONITOR_FLAG_CONTROL = 1<<NL80211_MNTR_FLAG_CONTROL,
534 MONITOR_FLAG_OTHER_BSS = 1<<NL80211_MNTR_FLAG_OTHER_BSS,
535 MONITOR_FLAG_COOK_FRAMES = 1<<NL80211_MNTR_FLAG_COOK_FRAMES,
536};
537
Luis Carlos Cobo2ec600d2008-02-23 15:17:06 +0100538/**
539 * enum mpath_info_flags - mesh path information flags
540 *
541 * Used by the driver to indicate which info in &struct mpath_info it has filled
542 * in during get_station() or dump_station().
543 *
Johannes Bergabe37c42010-06-07 11:12:27 +0200544 * @MPATH_INFO_FRAME_QLEN: @frame_qlen filled
545 * @MPATH_INFO_SN: @sn filled
546 * @MPATH_INFO_METRIC: @metric filled
547 * @MPATH_INFO_EXPTIME: @exptime filled
548 * @MPATH_INFO_DISCOVERY_TIMEOUT: @discovery_timeout filled
549 * @MPATH_INFO_DISCOVERY_RETRIES: @discovery_retries filled
550 * @MPATH_INFO_FLAGS: @flags filled
Luis Carlos Cobo2ec600d2008-02-23 15:17:06 +0100551 */
552enum mpath_info_flags {
553 MPATH_INFO_FRAME_QLEN = BIT(0),
Rui Paulod19b3bf2009-11-09 23:46:55 +0000554 MPATH_INFO_SN = BIT(1),
Luis Carlos Cobo2ec600d2008-02-23 15:17:06 +0100555 MPATH_INFO_METRIC = BIT(2),
556 MPATH_INFO_EXPTIME = BIT(3),
557 MPATH_INFO_DISCOVERY_TIMEOUT = BIT(4),
558 MPATH_INFO_DISCOVERY_RETRIES = BIT(5),
559 MPATH_INFO_FLAGS = BIT(6),
560};
561
562/**
563 * struct mpath_info - mesh path information
564 *
565 * Mesh path information filled by driver for get_mpath() and dump_mpath().
566 *
567 * @filled: bitfield of flags from &enum mpath_info_flags
568 * @frame_qlen: number of queued frames for this destination
Rui Paulod19b3bf2009-11-09 23:46:55 +0000569 * @sn: target sequence number
Luis Carlos Cobo2ec600d2008-02-23 15:17:06 +0100570 * @metric: metric (cost) of this mesh path
571 * @exptime: expiration time for the mesh path from now, in msecs
572 * @flags: mesh path flags
573 * @discovery_timeout: total mesh path discovery timeout, in msecs
574 * @discovery_retries: mesh path discovery retries
Johannes Bergf5ea9122009-08-07 16:17:38 +0200575 * @generation: generation number for nl80211 dumps.
576 * This number should increase every time the list of mesh paths
577 * changes, i.e. when a station is added or removed, so that
578 * userspace can tell whether it got a consistent snapshot.
Luis Carlos Cobo2ec600d2008-02-23 15:17:06 +0100579 */
580struct mpath_info {
581 u32 filled;
582 u32 frame_qlen;
Rui Paulod19b3bf2009-11-09 23:46:55 +0000583 u32 sn;
Luis Carlos Cobo2ec600d2008-02-23 15:17:06 +0100584 u32 metric;
585 u32 exptime;
586 u32 discovery_timeout;
587 u8 discovery_retries;
588 u8 flags;
Johannes Bergf5ea9122009-08-07 16:17:38 +0200589
590 int generation;
Luis Carlos Cobo2ec600d2008-02-23 15:17:06 +0100591};
592
Jouni Malinen9f1ba902008-08-07 20:07:01 +0300593/**
594 * struct bss_parameters - BSS parameters
595 *
596 * Used to change BSS parameters (mainly for AP mode).
597 *
598 * @use_cts_prot: Whether to use CTS protection
599 * (0 = no, 1 = yes, -1 = do not change)
600 * @use_short_preamble: Whether the use of short preambles is allowed
601 * (0 = no, 1 = yes, -1 = do not change)
602 * @use_short_slot_time: Whether the use of short slot time is allowed
603 * (0 = no, 1 = yes, -1 = do not change)
Jouni Malinen90c97a02008-10-30 16:59:22 +0200604 * @basic_rates: basic rates in IEEE 802.11 format
605 * (or NULL for no change)
606 * @basic_rates_len: number of basic rates
Felix Fietkaufd8aaaf2010-04-27 01:23:35 +0200607 * @ap_isolate: do not forward packets between connected stations
Helmut Schaa50b12f52010-11-19 12:40:25 +0100608 * @ht_opmode: HT Operation mode
609 * (u16 = opmode, -1 = do not change)
Jouni Malinen9f1ba902008-08-07 20:07:01 +0300610 */
611struct bss_parameters {
612 int use_cts_prot;
613 int use_short_preamble;
614 int use_short_slot_time;
Jouni Malinen90c97a02008-10-30 16:59:22 +0200615 u8 *basic_rates;
616 u8 basic_rates_len;
Felix Fietkaufd8aaaf2010-04-27 01:23:35 +0200617 int ap_isolate;
Helmut Schaa50b12f52010-11-19 12:40:25 +0100618 int ht_opmode;
Jouni Malinen9f1ba902008-08-07 20:07:01 +0300619};
Luis Carlos Cobo2ec600d2008-02-23 15:17:06 +0100620
Johannes Berg29cbe682010-12-03 09:20:44 +0100621/*
622 * struct mesh_config - 802.11s mesh configuration
623 *
624 * These parameters can be changed while the mesh is active.
625 */
colin@cozybit.com93da9cc2008-10-21 12:03:48 -0700626struct mesh_config {
627 /* Timeouts in ms */
628 /* Mesh plink management parameters */
629 u16 dot11MeshRetryTimeout;
630 u16 dot11MeshConfirmTimeout;
631 u16 dot11MeshHoldingTimeout;
632 u16 dot11MeshMaxPeerLinks;
633 u8 dot11MeshMaxRetries;
634 u8 dot11MeshTTL;
Javier Cardona45904f22010-12-03 09:20:40 +0100635 /* ttl used in path selection information elements */
636 u8 element_ttl;
colin@cozybit.com93da9cc2008-10-21 12:03:48 -0700637 bool auto_open_plinks;
638 /* HWMP parameters */
639 u8 dot11MeshHWMPmaxPREQretries;
640 u32 path_refresh_time;
641 u16 min_discovery_timeout;
642 u32 dot11MeshHWMPactivePathTimeout;
643 u16 dot11MeshHWMPpreqMinInterval;
644 u16 dot11MeshHWMPnetDiameterTraversalTime;
Rui Paulo63c57232009-11-09 23:46:57 +0000645 u8 dot11MeshHWMPRootMode;
colin@cozybit.com93da9cc2008-10-21 12:03:48 -0700646};
647
Jouni Malinen31888482008-10-30 16:59:24 +0200648/**
Johannes Berg29cbe682010-12-03 09:20:44 +0100649 * struct mesh_setup - 802.11s mesh setup configuration
650 * @mesh_id: the mesh ID
651 * @mesh_id_len: length of the mesh ID, at least 1 and at most 32 bytes
Javier Cardonac80d5452010-12-16 17:37:49 -0800652 * @path_sel_proto: which path selection protocol to use
653 * @path_metric: which metric to use
654 * @vendor_ie: vendor information elements (optional)
655 * @vendor_ie_len: length of vendor information elements
Johannes Berg29cbe682010-12-03 09:20:44 +0100656 *
657 * These parameters are fixed when the mesh is created.
658 */
659struct mesh_setup {
660 const u8 *mesh_id;
661 u8 mesh_id_len;
Javier Cardonac80d5452010-12-16 17:37:49 -0800662 u8 path_sel_proto;
663 u8 path_metric;
664 const u8 *vendor_ie;
665 u8 vendor_ie_len;
Johannes Berg29cbe682010-12-03 09:20:44 +0100666};
667
668/**
Jouni Malinen31888482008-10-30 16:59:24 +0200669 * struct ieee80211_txq_params - TX queue parameters
670 * @queue: TX queue identifier (NL80211_TXQ_Q_*)
671 * @txop: Maximum burst time in units of 32 usecs, 0 meaning disabled
672 * @cwmin: Minimum contention window [a value of the form 2^n-1 in the range
673 * 1..32767]
674 * @cwmax: Maximum contention window [a value of the form 2^n-1 in the range
675 * 1..32767]
676 * @aifs: Arbitration interframe space [0..255]
677 */
678struct ieee80211_txq_params {
679 enum nl80211_txq_q queue;
680 u16 txop;
681 u16 cwmin;
682 u16 cwmax;
683 u8 aifs;
684};
685
Johannes Berg704232c2007-04-23 12:20:05 -0700686/* from net/wireless.h */
687struct wiphy;
688
Johannes Bergd70e9692010-08-19 16:11:27 +0200689/**
690 * DOC: Scanning and BSS list handling
691 *
692 * The scanning process itself is fairly simple, but cfg80211 offers quite
693 * a bit of helper functionality. To start a scan, the scan operation will
694 * be invoked with a scan definition. This scan definition contains the
695 * channels to scan, and the SSIDs to send probe requests for (including the
696 * wildcard, if desired). A passive scan is indicated by having no SSIDs to
697 * probe. Additionally, a scan request may contain extra information elements
698 * that should be added to the probe request. The IEs are guaranteed to be
699 * well-formed, and will not exceed the maximum length the driver advertised
700 * in the wiphy structure.
701 *
702 * When scanning finds a BSS, cfg80211 needs to be notified of that, because
703 * it is responsible for maintaining the BSS list; the driver should not
704 * maintain a list itself. For this notification, various functions exist.
705 *
706 * Since drivers do not maintain a BSS list, there are also a number of
707 * functions to search for a BSS and obtain information about it from the
708 * BSS structure cfg80211 maintains. The BSS list is also made available
709 * to userspace.
710 */
Jouni Malinen72bdcf32008-11-26 16:15:24 +0200711
Johannes Berg704232c2007-04-23 12:20:05 -0700712/**
Johannes Berg2a519312009-02-10 21:25:55 +0100713 * struct cfg80211_ssid - SSID description
714 * @ssid: the SSID
715 * @ssid_len: length of the ssid
716 */
717struct cfg80211_ssid {
718 u8 ssid[IEEE80211_MAX_SSID_LEN];
719 u8 ssid_len;
720};
721
722/**
723 * struct cfg80211_scan_request - scan request description
724 *
725 * @ssids: SSIDs to scan for (active scan only)
726 * @n_ssids: number of SSIDs
727 * @channels: channels to scan on.
Helmut Schaaca3dbc22009-07-10 14:54:58 +0200728 * @n_channels: total number of channels to scan
Jouni Malinen70692ad2009-02-16 19:39:13 +0200729 * @ie: optional information element(s) to add into Probe Request or %NULL
730 * @ie_len: length of ie in octets
Johannes Berg2a519312009-02-10 21:25:55 +0100731 * @wiphy: the wiphy this was for
Johannes Berg463d0182009-07-14 00:33:35 +0200732 * @dev: the interface
Johannes Bergabe37c42010-06-07 11:12:27 +0200733 * @aborted: (internal) scan request was notified as aborted
Johannes Berg2a519312009-02-10 21:25:55 +0100734 */
735struct cfg80211_scan_request {
736 struct cfg80211_ssid *ssids;
737 int n_ssids;
Johannes Berg2a519312009-02-10 21:25:55 +0100738 u32 n_channels;
Johannes Bergde95a542009-04-01 11:58:36 +0200739 const u8 *ie;
Jouni Malinen70692ad2009-02-16 19:39:13 +0200740 size_t ie_len;
Johannes Berg2a519312009-02-10 21:25:55 +0100741
742 /* internal */
743 struct wiphy *wiphy;
Johannes Berg463d0182009-07-14 00:33:35 +0200744 struct net_device *dev;
Johannes Berg667503dd2009-07-07 03:56:11 +0200745 bool aborted;
Johannes Berg5ba63532009-08-07 17:54:07 +0200746
747 /* keep last */
748 struct ieee80211_channel *channels[0];
Johannes Berg2a519312009-02-10 21:25:55 +0100749};
750
751/**
752 * enum cfg80211_signal_type - signal type
753 *
754 * @CFG80211_SIGNAL_TYPE_NONE: no signal strength information available
755 * @CFG80211_SIGNAL_TYPE_MBM: signal strength in mBm (100*dBm)
756 * @CFG80211_SIGNAL_TYPE_UNSPEC: signal strength, increasing from 0 through 100
757 */
758enum cfg80211_signal_type {
759 CFG80211_SIGNAL_TYPE_NONE,
760 CFG80211_SIGNAL_TYPE_MBM,
761 CFG80211_SIGNAL_TYPE_UNSPEC,
762};
763
764/**
765 * struct cfg80211_bss - BSS description
766 *
767 * This structure describes a BSS (which may also be a mesh network)
768 * for use in scan results and similar.
769 *
Johannes Bergabe37c42010-06-07 11:12:27 +0200770 * @channel: channel this BSS is on
Johannes Berg2a519312009-02-10 21:25:55 +0100771 * @bssid: BSSID of the BSS
772 * @tsf: timestamp of last received update
773 * @beacon_interval: the beacon interval as from the frame
774 * @capability: the capability field in host byte order
775 * @information_elements: the information elements (Note that there
Jouni Malinen34a6edd2010-01-06 16:19:24 +0200776 * is no guarantee that these are well-formed!); this is a pointer to
777 * either the beacon_ies or proberesp_ies depending on whether Probe
778 * Response frame has been received
Johannes Berg2a519312009-02-10 21:25:55 +0100779 * @len_information_elements: total length of the information elements
Jouni Malinen34a6edd2010-01-06 16:19:24 +0200780 * @beacon_ies: the information elements from the last Beacon frame
781 * @len_beacon_ies: total length of the beacon_ies
782 * @proberesp_ies: the information elements from the last Probe Response frame
783 * @len_proberesp_ies: total length of the proberesp_ies
Johannes Berg77965c92009-02-18 18:45:06 +0100784 * @signal: signal strength value (type depends on the wiphy's signal_type)
Johannes Berg78c1c7e2009-02-10 21:25:57 +0100785 * @free_priv: function pointer to free private data
Johannes Berg2a519312009-02-10 21:25:55 +0100786 * @priv: private area for driver use, has at least wiphy->bss_priv_size bytes
787 */
788struct cfg80211_bss {
789 struct ieee80211_channel *channel;
790
791 u8 bssid[ETH_ALEN];
792 u64 tsf;
793 u16 beacon_interval;
794 u16 capability;
795 u8 *information_elements;
796 size_t len_information_elements;
Jouni Malinen34a6edd2010-01-06 16:19:24 +0200797 u8 *beacon_ies;
798 size_t len_beacon_ies;
799 u8 *proberesp_ies;
800 size_t len_proberesp_ies;
Johannes Berg2a519312009-02-10 21:25:55 +0100801
802 s32 signal;
Johannes Berg2a519312009-02-10 21:25:55 +0100803
Johannes Berg78c1c7e2009-02-10 21:25:57 +0100804 void (*free_priv)(struct cfg80211_bss *bss);
Johannes Berg2a519312009-02-10 21:25:55 +0100805 u8 priv[0] __attribute__((__aligned__(sizeof(void *))));
806};
807
808/**
Johannes Berg517357c2009-07-02 17:18:40 +0200809 * ieee80211_bss_get_ie - find IE with given ID
810 * @bss: the bss to search
811 * @ie: the IE ID
812 * Returns %NULL if not found.
813 */
814const u8 *ieee80211_bss_get_ie(struct cfg80211_bss *bss, u8 ie);
815
816
817/**
Samuel Ortizb23aa672009-07-01 21:26:54 +0200818 * struct cfg80211_crypto_settings - Crypto settings
819 * @wpa_versions: indicates which, if any, WPA versions are enabled
820 * (from enum nl80211_wpa_versions)
821 * @cipher_group: group key cipher suite (or 0 if unset)
822 * @n_ciphers_pairwise: number of AP supported unicast ciphers
823 * @ciphers_pairwise: unicast key cipher suites
824 * @n_akm_suites: number of AKM suites
825 * @akm_suites: AKM suites
826 * @control_port: Whether user space controls IEEE 802.1X port, i.e.,
827 * sets/clears %NL80211_STA_FLAG_AUTHORIZED. If true, the driver is
828 * required to assume that the port is unauthorized until authorized by
829 * user space. Otherwise, port is marked authorized by default.
Johannes Bergc0692b82010-08-27 14:26:53 +0300830 * @control_port_ethertype: the control port protocol that should be
831 * allowed through even on unauthorized ports
832 * @control_port_no_encrypt: TRUE to prevent encryption of control port
833 * protocol frames.
Samuel Ortizb23aa672009-07-01 21:26:54 +0200834 */
835struct cfg80211_crypto_settings {
836 u32 wpa_versions;
837 u32 cipher_group;
838 int n_ciphers_pairwise;
839 u32 ciphers_pairwise[NL80211_MAX_NR_CIPHER_SUITES];
840 int n_akm_suites;
841 u32 akm_suites[NL80211_MAX_NR_AKM_SUITES];
842 bool control_port;
Johannes Bergc0692b82010-08-27 14:26:53 +0300843 __be16 control_port_ethertype;
844 bool control_port_no_encrypt;
Samuel Ortizb23aa672009-07-01 21:26:54 +0200845};
846
847/**
Jouni Malinen636a5d32009-03-19 13:39:22 +0200848 * struct cfg80211_auth_request - Authentication request data
849 *
850 * This structure provides information needed to complete IEEE 802.11
851 * authentication.
Jouni Malinen636a5d32009-03-19 13:39:22 +0200852 *
Johannes Berg19957bb2009-07-02 17:20:43 +0200853 * @bss: The BSS to authenticate with.
Jouni Malinen636a5d32009-03-19 13:39:22 +0200854 * @auth_type: Authentication type (algorithm)
855 * @ie: Extra IEs to add to Authentication frame or %NULL
856 * @ie_len: Length of ie buffer in octets
Johannes Bergfffd0932009-07-08 14:22:54 +0200857 * @key_len: length of WEP key for shared key authentication
858 * @key_idx: index of WEP key for shared key authentication
859 * @key: WEP key for shared key authentication
Jouni Malinend5cdfac2010-04-04 09:37:19 +0300860 * @local_state_change: This is a request for a local state only, i.e., no
861 * Authentication frame is to be transmitted and authentication state is
862 * to be changed without having to wait for a response from the peer STA
863 * (AP).
Jouni Malinen636a5d32009-03-19 13:39:22 +0200864 */
865struct cfg80211_auth_request {
Johannes Berg19957bb2009-07-02 17:20:43 +0200866 struct cfg80211_bss *bss;
Jouni Malinen636a5d32009-03-19 13:39:22 +0200867 const u8 *ie;
868 size_t ie_len;
Johannes Berg19957bb2009-07-02 17:20:43 +0200869 enum nl80211_auth_type auth_type;
Johannes Bergfffd0932009-07-08 14:22:54 +0200870 const u8 *key;
871 u8 key_len, key_idx;
Jouni Malinend5cdfac2010-04-04 09:37:19 +0300872 bool local_state_change;
Jouni Malinen636a5d32009-03-19 13:39:22 +0200873};
874
875/**
876 * struct cfg80211_assoc_request - (Re)Association request data
877 *
878 * This structure provides information needed to complete IEEE 802.11
879 * (re)association.
Johannes Berg19957bb2009-07-02 17:20:43 +0200880 * @bss: The BSS to associate with.
Jouni Malinen636a5d32009-03-19 13:39:22 +0200881 * @ie: Extra IEs to add to (Re)Association Request frame or %NULL
882 * @ie_len: Length of ie buffer in octets
Jouni Malinendc6382c2009-05-06 22:09:37 +0300883 * @use_mfp: Use management frame protection (IEEE 802.11w) in this association
Samuel Ortizb23aa672009-07-01 21:26:54 +0200884 * @crypto: crypto settings
Johannes Berg3e5d7642009-07-07 14:37:26 +0200885 * @prev_bssid: previous BSSID, if not %NULL use reassociate frame
Jouni Malinen636a5d32009-03-19 13:39:22 +0200886 */
887struct cfg80211_assoc_request {
Johannes Berg19957bb2009-07-02 17:20:43 +0200888 struct cfg80211_bss *bss;
Johannes Berg3e5d7642009-07-07 14:37:26 +0200889 const u8 *ie, *prev_bssid;
Jouni Malinen636a5d32009-03-19 13:39:22 +0200890 size_t ie_len;
Samuel Ortizb23aa672009-07-01 21:26:54 +0200891 struct cfg80211_crypto_settings crypto;
Johannes Berg19957bb2009-07-02 17:20:43 +0200892 bool use_mfp;
Jouni Malinen636a5d32009-03-19 13:39:22 +0200893};
894
895/**
896 * struct cfg80211_deauth_request - Deauthentication request data
897 *
898 * This structure provides information needed to complete IEEE 802.11
899 * deauthentication.
900 *
Johannes Berg19957bb2009-07-02 17:20:43 +0200901 * @bss: the BSS to deauthenticate from
Jouni Malinen636a5d32009-03-19 13:39:22 +0200902 * @ie: Extra IEs to add to Deauthentication frame or %NULL
903 * @ie_len: Length of ie buffer in octets
Johannes Berg19957bb2009-07-02 17:20:43 +0200904 * @reason_code: The reason code for the deauthentication
Jouni Malinend5cdfac2010-04-04 09:37:19 +0300905 * @local_state_change: This is a request for a local state only, i.e., no
906 * Deauthentication frame is to be transmitted.
Jouni Malinen636a5d32009-03-19 13:39:22 +0200907 */
908struct cfg80211_deauth_request {
Johannes Berg19957bb2009-07-02 17:20:43 +0200909 struct cfg80211_bss *bss;
Jouni Malinen636a5d32009-03-19 13:39:22 +0200910 const u8 *ie;
911 size_t ie_len;
Johannes Berg19957bb2009-07-02 17:20:43 +0200912 u16 reason_code;
Jouni Malinend5cdfac2010-04-04 09:37:19 +0300913 bool local_state_change;
Jouni Malinen636a5d32009-03-19 13:39:22 +0200914};
915
916/**
917 * struct cfg80211_disassoc_request - Disassociation request data
918 *
919 * This structure provides information needed to complete IEEE 802.11
920 * disassocation.
921 *
Johannes Berg19957bb2009-07-02 17:20:43 +0200922 * @bss: the BSS to disassociate from
Jouni Malinen636a5d32009-03-19 13:39:22 +0200923 * @ie: Extra IEs to add to Disassociation frame or %NULL
924 * @ie_len: Length of ie buffer in octets
Johannes Berg19957bb2009-07-02 17:20:43 +0200925 * @reason_code: The reason code for the disassociation
Jouni Malinend5cdfac2010-04-04 09:37:19 +0300926 * @local_state_change: This is a request for a local state only, i.e., no
927 * Disassociation frame is to be transmitted.
Jouni Malinen636a5d32009-03-19 13:39:22 +0200928 */
929struct cfg80211_disassoc_request {
Johannes Berg19957bb2009-07-02 17:20:43 +0200930 struct cfg80211_bss *bss;
Jouni Malinen636a5d32009-03-19 13:39:22 +0200931 const u8 *ie;
932 size_t ie_len;
Johannes Berg19957bb2009-07-02 17:20:43 +0200933 u16 reason_code;
Jouni Malinend5cdfac2010-04-04 09:37:19 +0300934 bool local_state_change;
Jouni Malinen636a5d32009-03-19 13:39:22 +0200935};
936
937/**
Johannes Berg04a773a2009-04-19 21:24:32 +0200938 * struct cfg80211_ibss_params - IBSS parameters
939 *
940 * This structure defines the IBSS parameters for the join_ibss()
941 * method.
942 *
943 * @ssid: The SSID, will always be non-null.
944 * @ssid_len: The length of the SSID, will always be non-zero.
945 * @bssid: Fixed BSSID requested, maybe be %NULL, if set do not
946 * search for IBSSs with a different BSSID.
947 * @channel: The channel to use if no IBSS can be found to join.
948 * @channel_fixed: The channel should be fixed -- do not search for
949 * IBSSs to join on other channels.
950 * @ie: information element(s) to include in the beacon
951 * @ie_len: length of that
Johannes Berg8e30bc52009-04-22 17:45:38 +0200952 * @beacon_interval: beacon interval to use
Johannes Bergfffd0932009-07-08 14:22:54 +0200953 * @privacy: this is a protected network, keys will be configured
954 * after joining
Teemu Paasikivifbd2c8d2010-06-14 12:55:31 +0300955 * @basic_rates: bitmap of basic rates to use when creating the IBSS
Felix Fietkaudd5b4cc2010-11-22 20:58:24 +0100956 * @mcast_rate: per-band multicast rate index + 1 (0: disabled)
Johannes Berg04a773a2009-04-19 21:24:32 +0200957 */
958struct cfg80211_ibss_params {
959 u8 *ssid;
960 u8 *bssid;
961 struct ieee80211_channel *channel;
962 u8 *ie;
963 u8 ssid_len, ie_len;
Johannes Berg8e30bc52009-04-22 17:45:38 +0200964 u16 beacon_interval;
Teemu Paasikivifbd2c8d2010-06-14 12:55:31 +0300965 u32 basic_rates;
Johannes Berg04a773a2009-04-19 21:24:32 +0200966 bool channel_fixed;
Johannes Bergfffd0932009-07-08 14:22:54 +0200967 bool privacy;
Felix Fietkaudd5b4cc2010-11-22 20:58:24 +0100968 int mcast_rate[IEEE80211_NUM_BANDS];
Johannes Berg04a773a2009-04-19 21:24:32 +0200969};
970
971/**
Samuel Ortizb23aa672009-07-01 21:26:54 +0200972 * struct cfg80211_connect_params - Connection parameters
973 *
974 * This structure provides information needed to complete IEEE 802.11
975 * authentication and association.
976 *
977 * @channel: The channel to use or %NULL if not specified (auto-select based
978 * on scan results)
979 * @bssid: The AP BSSID or %NULL if not specified (auto-select based on scan
980 * results)
981 * @ssid: SSID
982 * @ssid_len: Length of ssid in octets
983 * @auth_type: Authentication type (algorithm)
Johannes Bergabe37c42010-06-07 11:12:27 +0200984 * @ie: IEs for association request
985 * @ie_len: Length of assoc_ie in octets
Samuel Ortizb23aa672009-07-01 21:26:54 +0200986 * @privacy: indicates whether privacy-enabled APs should be used
987 * @crypto: crypto settings
Johannes Bergfffd0932009-07-08 14:22:54 +0200988 * @key_len: length of WEP key for shared key authentication
989 * @key_idx: index of WEP key for shared key authentication
990 * @key: WEP key for shared key authentication
Samuel Ortizb23aa672009-07-01 21:26:54 +0200991 */
992struct cfg80211_connect_params {
993 struct ieee80211_channel *channel;
994 u8 *bssid;
995 u8 *ssid;
996 size_t ssid_len;
997 enum nl80211_auth_type auth_type;
998 u8 *ie;
999 size_t ie_len;
1000 bool privacy;
1001 struct cfg80211_crypto_settings crypto;
Johannes Bergfffd0932009-07-08 14:22:54 +02001002 const u8 *key;
1003 u8 key_len, key_idx;
Samuel Ortizb23aa672009-07-01 21:26:54 +02001004};
1005
1006/**
Jouni Malinenb9a5f8ca2009-04-20 18:39:05 +02001007 * enum wiphy_params_flags - set_wiphy_params bitfield values
Johannes Bergabe37c42010-06-07 11:12:27 +02001008 * @WIPHY_PARAM_RETRY_SHORT: wiphy->retry_short has changed
1009 * @WIPHY_PARAM_RETRY_LONG: wiphy->retry_long has changed
1010 * @WIPHY_PARAM_FRAG_THRESHOLD: wiphy->frag_threshold has changed
1011 * @WIPHY_PARAM_RTS_THRESHOLD: wiphy->rts_threshold has changed
1012 * @WIPHY_PARAM_COVERAGE_CLASS: coverage class changed
Jouni Malinenb9a5f8ca2009-04-20 18:39:05 +02001013 */
1014enum wiphy_params_flags {
1015 WIPHY_PARAM_RETRY_SHORT = 1 << 0,
1016 WIPHY_PARAM_RETRY_LONG = 1 << 1,
1017 WIPHY_PARAM_FRAG_THRESHOLD = 1 << 2,
1018 WIPHY_PARAM_RTS_THRESHOLD = 1 << 3,
Lukáš Turek81077e82009-12-21 22:50:47 +01001019 WIPHY_PARAM_COVERAGE_CLASS = 1 << 4,
Jouni Malinenb9a5f8ca2009-04-20 18:39:05 +02001020};
1021
Johannes Berg99303802009-07-01 21:26:59 +02001022/*
1023 * cfg80211_bitrate_mask - masks for bitrate control
1024 */
1025struct cfg80211_bitrate_mask {
Johannes Berg99303802009-07-01 21:26:59 +02001026 struct {
1027 u32 legacy;
Jouni Malinen37eb0b12010-01-06 13:09:08 +02001028 /* TODO: add support for masking MCS rates; e.g.: */
1029 /* u8 mcs[IEEE80211_HT_MCS_MASK_LEN]; */
Johannes Berg99303802009-07-01 21:26:59 +02001030 } control[IEEE80211_NUM_BANDS];
Johannes Berg99303802009-07-01 21:26:59 +02001031};
Samuel Ortiz67fbb162009-11-24 23:59:15 +01001032/**
1033 * struct cfg80211_pmksa - PMK Security Association
1034 *
1035 * This structure is passed to the set/del_pmksa() method for PMKSA
1036 * caching.
1037 *
1038 * @bssid: The AP's BSSID.
1039 * @pmkid: The PMK material itself.
1040 */
1041struct cfg80211_pmksa {
1042 u8 *bssid;
1043 u8 *pmkid;
1044};
Johannes Berg99303802009-07-01 21:26:59 +02001045
Johannes Berg7643a2c2009-06-02 13:01:39 +02001046/**
Johannes Berg704232c2007-04-23 12:20:05 -07001047 * struct cfg80211_ops - backend description for wireless configuration
1048 *
1049 * This struct is registered by fullmac card drivers and/or wireless stacks
1050 * in order to handle configuration requests on their interfaces.
1051 *
1052 * All callbacks except where otherwise noted should return 0
1053 * on success or a negative error code.
1054 *
Johannes Berg43fb45cb2007-04-24 14:07:27 -07001055 * All operations are currently invoked under rtnl for consistency with the
1056 * wireless extensions but this is subject to reevaluation as soon as this
1057 * code is used more widely and we have a first user without wext.
1058 *
Johannes Berg0378b3f2009-01-19 11:20:52 -05001059 * @suspend: wiphy device needs to be suspended
1060 * @resume: wiphy device needs to be resumed
1061 *
Johannes Berg60719ff2008-09-16 14:55:09 +02001062 * @add_virtual_intf: create a new virtual interface with the given name,
Johannes Berg463d0182009-07-14 00:33:35 +02001063 * must set the struct wireless_dev's iftype. Beware: You must create
Johannes Bergf9e10ce2010-12-03 09:20:42 +01001064 * the new netdev in the wiphy's network namespace! Returns the netdev,
1065 * or an ERR_PTR.
Johannes Berg704232c2007-04-23 12:20:05 -07001066 *
1067 * @del_virtual_intf: remove the virtual interface determined by ifindex.
Johannes Berg55682962007-09-20 13:09:35 -04001068 *
Johannes Berg60719ff2008-09-16 14:55:09 +02001069 * @change_virtual_intf: change type/configuration of virtual interface,
1070 * keep the struct wireless_dev's iftype updated.
Johannes Berg55682962007-09-20 13:09:35 -04001071 *
Johannes Berg41ade002007-12-19 02:03:29 +01001072 * @add_key: add a key with the given parameters. @mac_addr will be %NULL
1073 * when adding a group key.
1074 *
1075 * @get_key: get information about the key with the given parameters.
1076 * @mac_addr will be %NULL when requesting information for a group
1077 * key. All pointers given to the @callback function need not be valid
Johannes Berge3da5742009-05-18 19:56:36 +02001078 * after it returns. This function should return an error if it is
1079 * not possible to retrieve the key, -ENOENT if it doesn't exist.
Johannes Berg41ade002007-12-19 02:03:29 +01001080 *
1081 * @del_key: remove a key given the @mac_addr (%NULL for a group key)
Johannes Berge3da5742009-05-18 19:56:36 +02001082 * and @key_index, return -ENOENT if the key doesn't exist.
Johannes Berg41ade002007-12-19 02:03:29 +01001083 *
1084 * @set_default_key: set the default key on an interface
Johannes Berged1b6cc2007-12-19 02:03:32 +01001085 *
Jouni Malinen3cfcf6ac2009-01-08 13:32:02 +02001086 * @set_default_mgmt_key: set the default management frame key on an interface
1087 *
Johannes Berged1b6cc2007-12-19 02:03:32 +01001088 * @add_beacon: Add a beacon with given parameters, @head, @interval
1089 * and @dtim_period will be valid, @tail is optional.
1090 * @set_beacon: Change the beacon parameters for an access point mode
1091 * interface. This should reject the call when no beacon has been
1092 * configured.
1093 * @del_beacon: Remove beacon configuration and stop sending the beacon.
Johannes Berg5727ef12007-12-19 02:03:34 +01001094 *
1095 * @add_station: Add a new station.
Johannes Berg5727ef12007-12-19 02:03:34 +01001096 * @del_station: Remove a station; @mac may be NULL to remove all stations.
Johannes Berg5727ef12007-12-19 02:03:34 +01001097 * @change_station: Modify a given station.
Johannes Bergabe37c42010-06-07 11:12:27 +02001098 * @get_station: get station information for the station identified by @mac
1099 * @dump_station: dump station callback -- resume dump at index @idx
1100 *
1101 * @add_mpath: add a fixed mesh path
1102 * @del_mpath: delete a given mesh path
1103 * @change_mpath: change a given mesh path
1104 * @get_mpath: get a mesh path for the given parameters
1105 * @dump_mpath: dump mesh path callback -- resume dump at index @idx
Luis Carlos Cobo2ec600d2008-02-23 15:17:06 +01001106 *
Javier Cardona24bdd9f2010-12-16 17:37:48 -08001107 * @get_mesh_config: Get the current mesh configuration
colin@cozybit.com93da9cc2008-10-21 12:03:48 -07001108 *
Javier Cardona24bdd9f2010-12-16 17:37:48 -08001109 * @update_mesh_config: Update mesh parameters on a running mesh.
colin@cozybit.com93da9cc2008-10-21 12:03:48 -07001110 * The mask is a bitfield which tells us which parameters to
1111 * set, and which to leave alone.
1112 *
Jouni Malinen9f1ba902008-08-07 20:07:01 +03001113 * @change_bss: Modify parameters for a given BSS.
Jouni Malinen31888482008-10-30 16:59:24 +02001114 *
1115 * @set_txq_params: Set TX queue parameters
Jouni Malinen72bdcf32008-11-26 16:15:24 +02001116 *
Johannes Bergf444de02010-05-05 15:25:02 +02001117 * @set_channel: Set channel for a given wireless interface. Some devices
1118 * may support multi-channel operation (by channel hopping) so cfg80211
1119 * doesn't verify much. Note, however, that the passed netdev may be
1120 * %NULL as well if the user requested changing the channel for the
1121 * device itself, or for a monitor interface.
Jouni Malinen9aed3cc2009-01-13 16:03:29 +02001122 *
Johannes Berg2a519312009-02-10 21:25:55 +01001123 * @scan: Request to do a scan. If returning zero, the scan request is given
1124 * the driver, and will be valid until passed to cfg80211_scan_done().
1125 * For scan results, call cfg80211_inform_bss(); you can call this outside
1126 * the scan/scan_done bracket too.
Jouni Malinen636a5d32009-03-19 13:39:22 +02001127 *
1128 * @auth: Request to authenticate with the specified peer
1129 * @assoc: Request to (re)associate with the specified peer
1130 * @deauth: Request to deauthenticate from the specified peer
1131 * @disassoc: Request to disassociate from the specified peer
Johannes Berg04a773a2009-04-19 21:24:32 +02001132 *
Samuel Ortizb23aa672009-07-01 21:26:54 +02001133 * @connect: Connect to the ESS with the specified parameters. When connected,
1134 * call cfg80211_connect_result() with status code %WLAN_STATUS_SUCCESS.
1135 * If the connection fails for some reason, call cfg80211_connect_result()
1136 * with the status from the AP.
1137 * @disconnect: Disconnect from the BSS/ESS.
1138 *
Johannes Berg04a773a2009-04-19 21:24:32 +02001139 * @join_ibss: Join the specified IBSS (or create if necessary). Once done, call
1140 * cfg80211_ibss_joined(), also call that function when changing BSSID due
1141 * to a merge.
1142 * @leave_ibss: Leave the IBSS.
Jouni Malinenb9a5f8ca2009-04-20 18:39:05 +02001143 *
1144 * @set_wiphy_params: Notify that wiphy parameters have changed;
1145 * @changed bitfield (see &enum wiphy_params_flags) describes which values
1146 * have changed. The actual parameter values are available in
1147 * struct wiphy. If returning an error, no value should be changed.
Johannes Berg7643a2c2009-06-02 13:01:39 +02001148 *
1149 * @set_tx_power: set the transmit power according to the parameters
1150 * @get_tx_power: store the current TX power into the dbm variable;
Johannes Berg1f87f7d2009-06-02 13:01:41 +02001151 * return 0 if successful
1152 *
Johannes Bergabe37c42010-06-07 11:12:27 +02001153 * @set_wds_peer: set the WDS peer for a WDS interface
1154 *
Johannes Berg1f87f7d2009-06-02 13:01:41 +02001155 * @rfkill_poll: polls the hw rfkill line, use cfg80211 reporting
1156 * functions to adjust rfkill hw state
Johannes Bergaff89a92009-07-01 21:26:51 +02001157 *
Holger Schurig61fa7132009-11-11 12:25:40 +01001158 * @dump_survey: get site survey information.
1159 *
Jouni Malinen9588bbd2009-12-23 13:15:41 +01001160 * @remain_on_channel: Request the driver to remain awake on the specified
1161 * channel for the specified duration to complete an off-channel
1162 * operation (e.g., public action frame exchange). When the driver is
1163 * ready on the requested channel, it must indicate this with an event
1164 * notification by calling cfg80211_ready_on_channel().
1165 * @cancel_remain_on_channel: Cancel an on-going remain-on-channel operation.
1166 * This allows the operation to be terminated prior to timeout based on
1167 * the duration value.
Johannes Bergf7ca38d2010-11-25 10:02:29 +01001168 * @mgmt_tx: Transmit a management frame.
1169 * @mgmt_tx_cancel_wait: Cancel the wait time from transmitting a management
1170 * frame on another channel
Jouni Malinen9588bbd2009-12-23 13:15:41 +01001171 *
Johannes Bergaff89a92009-07-01 21:26:51 +02001172 * @testmode_cmd: run a test mode command
Samuel Ortiz67fbb162009-11-24 23:59:15 +01001173 *
Johannes Bergabe37c42010-06-07 11:12:27 +02001174 * @set_bitrate_mask: set the bitrate mask configuration
1175 *
Samuel Ortiz67fbb162009-11-24 23:59:15 +01001176 * @set_pmksa: Cache a PMKID for a BSSID. This is mostly useful for fullmac
1177 * devices running firmwares capable of generating the (re) association
1178 * RSN IE. It allows for faster roaming between WPA2 BSSIDs.
1179 * @del_pmksa: Delete a cached PMKID.
1180 * @flush_pmksa: Flush all cached PMKIDs.
Juuso Oikarinen9043f3b2010-04-27 12:47:41 +03001181 * @set_power_mgmt: Configure WLAN power management. A timeout value of -1
1182 * allows the driver to adjust the dynamic ps timeout value.
Juuso Oikarinend6dc1a32010-03-23 09:02:33 +02001183 * @set_cqm_rssi_config: Configure connection quality monitor RSSI threshold.
Samuel Ortiz67fbb162009-11-24 23:59:15 +01001184 *
Johannes Berg271733c2010-10-13 12:06:23 +02001185 * @mgmt_frame_register: Notify driver that a management frame type was
1186 * registered. Note that this callback may not sleep, and cannot run
1187 * concurrently with itself.
Bruno Randolf547025d2010-12-02 16:23:12 +09001188 *
1189 * @set_antenna: Set antenna configuration (tx_ant, rx_ant) on the device.
1190 * Parameters are bitmaps of allowed antennas to use for TX/RX. Drivers may
1191 * reject TX/RX mask combinations they cannot support by returning -EINVAL
1192 * (also see nl80211.h @NL80211_ATTR_WIPHY_ANTENNA_TX).
1193 *
1194 * @get_antenna: Get current antenna configuration from device (tx_ant, rx_ant).
Johannes Berg704232c2007-04-23 12:20:05 -07001195 */
1196struct cfg80211_ops {
Johannes Berg0378b3f2009-01-19 11:20:52 -05001197 int (*suspend)(struct wiphy *wiphy);
1198 int (*resume)(struct wiphy *wiphy);
1199
Johannes Bergf9e10ce2010-12-03 09:20:42 +01001200 struct net_device * (*add_virtual_intf)(struct wiphy *wiphy,
1201 char *name,
1202 enum nl80211_iftype type,
1203 u32 *flags,
1204 struct vif_params *params);
Johannes Berg463d0182009-07-14 00:33:35 +02001205 int (*del_virtual_intf)(struct wiphy *wiphy, struct net_device *dev);
Johannes Berge36d56b2009-06-09 21:04:43 +02001206 int (*change_virtual_intf)(struct wiphy *wiphy,
1207 struct net_device *dev,
Luis Carlos Cobo2ec600d2008-02-23 15:17:06 +01001208 enum nl80211_iftype type, u32 *flags,
1209 struct vif_params *params);
Johannes Berg41ade002007-12-19 02:03:29 +01001210
1211 int (*add_key)(struct wiphy *wiphy, struct net_device *netdev,
Johannes Berge31b8212010-10-05 19:39:30 +02001212 u8 key_index, bool pairwise, const u8 *mac_addr,
Johannes Berg41ade002007-12-19 02:03:29 +01001213 struct key_params *params);
1214 int (*get_key)(struct wiphy *wiphy, struct net_device *netdev,
Johannes Berge31b8212010-10-05 19:39:30 +02001215 u8 key_index, bool pairwise, const u8 *mac_addr,
1216 void *cookie,
Johannes Berg41ade002007-12-19 02:03:29 +01001217 void (*callback)(void *cookie, struct key_params*));
1218 int (*del_key)(struct wiphy *wiphy, struct net_device *netdev,
Johannes Berge31b8212010-10-05 19:39:30 +02001219 u8 key_index, bool pairwise, const u8 *mac_addr);
Johannes Berg41ade002007-12-19 02:03:29 +01001220 int (*set_default_key)(struct wiphy *wiphy,
1221 struct net_device *netdev,
Johannes Bergdbd2fd62010-12-09 19:58:59 +01001222 u8 key_index, bool unicast, bool multicast);
Jouni Malinen3cfcf6ac2009-01-08 13:32:02 +02001223 int (*set_default_mgmt_key)(struct wiphy *wiphy,
1224 struct net_device *netdev,
1225 u8 key_index);
Johannes Berged1b6cc2007-12-19 02:03:32 +01001226
1227 int (*add_beacon)(struct wiphy *wiphy, struct net_device *dev,
1228 struct beacon_parameters *info);
1229 int (*set_beacon)(struct wiphy *wiphy, struct net_device *dev,
1230 struct beacon_parameters *info);
1231 int (*del_beacon)(struct wiphy *wiphy, struct net_device *dev);
Johannes Berg5727ef12007-12-19 02:03:34 +01001232
1233
1234 int (*add_station)(struct wiphy *wiphy, struct net_device *dev,
1235 u8 *mac, struct station_parameters *params);
1236 int (*del_station)(struct wiphy *wiphy, struct net_device *dev,
1237 u8 *mac);
1238 int (*change_station)(struct wiphy *wiphy, struct net_device *dev,
1239 u8 *mac, struct station_parameters *params);
Johannes Bergfd5b74d2007-12-19 02:03:36 +01001240 int (*get_station)(struct wiphy *wiphy, struct net_device *dev,
Luis Carlos Cobo2ec600d2008-02-23 15:17:06 +01001241 u8 *mac, struct station_info *sinfo);
1242 int (*dump_station)(struct wiphy *wiphy, struct net_device *dev,
1243 int idx, u8 *mac, struct station_info *sinfo);
1244
1245 int (*add_mpath)(struct wiphy *wiphy, struct net_device *dev,
1246 u8 *dst, u8 *next_hop);
1247 int (*del_mpath)(struct wiphy *wiphy, struct net_device *dev,
1248 u8 *dst);
1249 int (*change_mpath)(struct wiphy *wiphy, struct net_device *dev,
1250 u8 *dst, u8 *next_hop);
1251 int (*get_mpath)(struct wiphy *wiphy, struct net_device *dev,
1252 u8 *dst, u8 *next_hop,
1253 struct mpath_info *pinfo);
1254 int (*dump_mpath)(struct wiphy *wiphy, struct net_device *dev,
1255 int idx, u8 *dst, u8 *next_hop,
1256 struct mpath_info *pinfo);
Javier Cardona24bdd9f2010-12-16 17:37:48 -08001257 int (*get_mesh_config)(struct wiphy *wiphy,
colin@cozybit.com93da9cc2008-10-21 12:03:48 -07001258 struct net_device *dev,
1259 struct mesh_config *conf);
Javier Cardona24bdd9f2010-12-16 17:37:48 -08001260 int (*update_mesh_config)(struct wiphy *wiphy,
Johannes Berg29cbe682010-12-03 09:20:44 +01001261 struct net_device *dev, u32 mask,
1262 const struct mesh_config *nconf);
1263 int (*join_mesh)(struct wiphy *wiphy, struct net_device *dev,
1264 const struct mesh_config *conf,
1265 const struct mesh_setup *setup);
1266 int (*leave_mesh)(struct wiphy *wiphy, struct net_device *dev);
1267
Jouni Malinen9f1ba902008-08-07 20:07:01 +03001268 int (*change_bss)(struct wiphy *wiphy, struct net_device *dev,
1269 struct bss_parameters *params);
Jouni Malinen31888482008-10-30 16:59:24 +02001270
1271 int (*set_txq_params)(struct wiphy *wiphy,
1272 struct ieee80211_txq_params *params);
Jouni Malinen72bdcf32008-11-26 16:15:24 +02001273
Johannes Bergf444de02010-05-05 15:25:02 +02001274 int (*set_channel)(struct wiphy *wiphy, struct net_device *dev,
Jouni Malinen72bdcf32008-11-26 16:15:24 +02001275 struct ieee80211_channel *chan,
Sujith094d05d2008-12-12 11:57:43 +05301276 enum nl80211_channel_type channel_type);
Jouni Malinen9aed3cc2009-01-13 16:03:29 +02001277
Johannes Berg2a519312009-02-10 21:25:55 +01001278 int (*scan)(struct wiphy *wiphy, struct net_device *dev,
1279 struct cfg80211_scan_request *request);
Jouni Malinen636a5d32009-03-19 13:39:22 +02001280
1281 int (*auth)(struct wiphy *wiphy, struct net_device *dev,
1282 struct cfg80211_auth_request *req);
1283 int (*assoc)(struct wiphy *wiphy, struct net_device *dev,
1284 struct cfg80211_assoc_request *req);
1285 int (*deauth)(struct wiphy *wiphy, struct net_device *dev,
Johannes Berg667503dd2009-07-07 03:56:11 +02001286 struct cfg80211_deauth_request *req,
1287 void *cookie);
Jouni Malinen636a5d32009-03-19 13:39:22 +02001288 int (*disassoc)(struct wiphy *wiphy, struct net_device *dev,
Johannes Berg667503dd2009-07-07 03:56:11 +02001289 struct cfg80211_disassoc_request *req,
1290 void *cookie);
Johannes Berg04a773a2009-04-19 21:24:32 +02001291
Samuel Ortizb23aa672009-07-01 21:26:54 +02001292 int (*connect)(struct wiphy *wiphy, struct net_device *dev,
1293 struct cfg80211_connect_params *sme);
1294 int (*disconnect)(struct wiphy *wiphy, struct net_device *dev,
1295 u16 reason_code);
1296
Johannes Berg04a773a2009-04-19 21:24:32 +02001297 int (*join_ibss)(struct wiphy *wiphy, struct net_device *dev,
1298 struct cfg80211_ibss_params *params);
1299 int (*leave_ibss)(struct wiphy *wiphy, struct net_device *dev);
Jouni Malinenb9a5f8ca2009-04-20 18:39:05 +02001300
1301 int (*set_wiphy_params)(struct wiphy *wiphy, u32 changed);
Johannes Berg7643a2c2009-06-02 13:01:39 +02001302
1303 int (*set_tx_power)(struct wiphy *wiphy,
Juuso Oikarinenfa61cf72010-06-23 12:12:37 +03001304 enum nl80211_tx_power_setting type, int mbm);
Johannes Berg7643a2c2009-06-02 13:01:39 +02001305 int (*get_tx_power)(struct wiphy *wiphy, int *dbm);
Johannes Berg1f87f7d2009-06-02 13:01:41 +02001306
Johannes Bergab737a42009-07-01 21:26:58 +02001307 int (*set_wds_peer)(struct wiphy *wiphy, struct net_device *dev,
Johannes Berg388ac772010-10-07 13:11:09 +02001308 const u8 *addr);
Johannes Bergab737a42009-07-01 21:26:58 +02001309
Johannes Berg1f87f7d2009-06-02 13:01:41 +02001310 void (*rfkill_poll)(struct wiphy *wiphy);
Johannes Bergaff89a92009-07-01 21:26:51 +02001311
1312#ifdef CONFIG_NL80211_TESTMODE
1313 int (*testmode_cmd)(struct wiphy *wiphy, void *data, int len);
1314#endif
Johannes Bergbc92afd2009-07-01 21:26:57 +02001315
Johannes Berg99303802009-07-01 21:26:59 +02001316 int (*set_bitrate_mask)(struct wiphy *wiphy,
1317 struct net_device *dev,
1318 const u8 *peer,
1319 const struct cfg80211_bitrate_mask *mask);
1320
Holger Schurig61fa7132009-11-11 12:25:40 +01001321 int (*dump_survey)(struct wiphy *wiphy, struct net_device *netdev,
1322 int idx, struct survey_info *info);
1323
Samuel Ortiz67fbb162009-11-24 23:59:15 +01001324 int (*set_pmksa)(struct wiphy *wiphy, struct net_device *netdev,
1325 struct cfg80211_pmksa *pmksa);
1326 int (*del_pmksa)(struct wiphy *wiphy, struct net_device *netdev,
1327 struct cfg80211_pmksa *pmksa);
1328 int (*flush_pmksa)(struct wiphy *wiphy, struct net_device *netdev);
1329
Jouni Malinen9588bbd2009-12-23 13:15:41 +01001330 int (*remain_on_channel)(struct wiphy *wiphy,
1331 struct net_device *dev,
1332 struct ieee80211_channel *chan,
1333 enum nl80211_channel_type channel_type,
1334 unsigned int duration,
1335 u64 *cookie);
1336 int (*cancel_remain_on_channel)(struct wiphy *wiphy,
1337 struct net_device *dev,
1338 u64 cookie);
1339
Johannes Berg2e161f72010-08-12 15:38:38 +02001340 int (*mgmt_tx)(struct wiphy *wiphy, struct net_device *dev,
Johannes Bergf7ca38d2010-11-25 10:02:29 +01001341 struct ieee80211_channel *chan, bool offchan,
Jouni Malinen026331c2010-02-15 12:53:10 +02001342 enum nl80211_channel_type channel_type,
Johannes Bergf7ca38d2010-11-25 10:02:29 +01001343 bool channel_type_valid, unsigned int wait,
Jouni Malinen026331c2010-02-15 12:53:10 +02001344 const u8 *buf, size_t len, u64 *cookie);
Johannes Bergf7ca38d2010-11-25 10:02:29 +01001345 int (*mgmt_tx_cancel_wait)(struct wiphy *wiphy,
1346 struct net_device *dev,
1347 u64 cookie);
Jouni Malinen026331c2010-02-15 12:53:10 +02001348
Johannes Bergbc92afd2009-07-01 21:26:57 +02001349 int (*set_power_mgmt)(struct wiphy *wiphy, struct net_device *dev,
1350 bool enabled, int timeout);
Juuso Oikarinend6dc1a32010-03-23 09:02:33 +02001351
1352 int (*set_cqm_rssi_config)(struct wiphy *wiphy,
1353 struct net_device *dev,
1354 s32 rssi_thold, u32 rssi_hyst);
Johannes Berg271733c2010-10-13 12:06:23 +02001355
1356 void (*mgmt_frame_register)(struct wiphy *wiphy,
1357 struct net_device *dev,
1358 u16 frame_type, bool reg);
Bruno Randolfafe0cbf2010-11-10 12:50:50 +09001359
1360 int (*set_antenna)(struct wiphy *wiphy, u32 tx_ant, u32 rx_ant);
1361 int (*get_antenna)(struct wiphy *wiphy, u32 *tx_ant, u32 *rx_ant);
Johannes Berg704232c2007-04-23 12:20:05 -07001362};
1363
Johannes Bergd3236552009-04-20 14:31:42 +02001364/*
1365 * wireless hardware and networking interfaces structures
1366 * and registration/helper functions
1367 */
1368
1369/**
Johannes Berg5be83de2009-11-19 00:56:28 +01001370 * enum wiphy_flags - wiphy capability flags
1371 *
1372 * @WIPHY_FLAG_CUSTOM_REGULATORY: tells us the driver for this device
Johannes Bergd3236552009-04-20 14:31:42 +02001373 * has its own custom regulatory domain and cannot identify the
1374 * ISO / IEC 3166 alpha2 it belongs to. When this is enabled
1375 * we will disregard the first regulatory hint (when the
1376 * initiator is %REGDOM_SET_BY_CORE).
Johannes Berg5be83de2009-11-19 00:56:28 +01001377 * @WIPHY_FLAG_STRICT_REGULATORY: tells us the driver for this device will
1378 * ignore regulatory domain settings until it gets its own regulatory
Luis R. Rodriguez749b5272010-10-20 10:18:54 -07001379 * domain via its regulatory_hint() unless the regulatory hint is
1380 * from a country IE. After its gets its own regulatory domain it will
1381 * only allow further regulatory domain settings to further enhance
1382 * compliance. For example if channel 13 and 14 are disabled by this
1383 * regulatory domain no user regulatory domain can enable these channels
1384 * at a later time. This can be used for devices which do not have
1385 * calibration information guaranteed for frequencies or settings
1386 * outside of its regulatory domain.
Johannes Berg5be83de2009-11-19 00:56:28 +01001387 * @WIPHY_FLAG_DISABLE_BEACON_HINTS: enable this if your driver needs to ensure
1388 * that passive scan flags and beaconing flags may not be lifted by
1389 * cfg80211 due to regulatory beacon hints. For more information on beacon
Luis R. Rodriguez37184242009-07-30 17:43:48 -07001390 * hints read the documenation for regulatory_hint_found_beacon()
Johannes Berg5be83de2009-11-19 00:56:28 +01001391 * @WIPHY_FLAG_NETNS_OK: if not set, do not allow changing the netns of this
1392 * wiphy at all
1393 * @WIPHY_FLAG_PS_ON_BY_DEFAULT: if set to true, powersave will be enabled
1394 * by default -- this flag will be set depending on the kernel's default
1395 * on wiphy_new(), but can be changed by the driver if it has a good
1396 * reason to override the default
Johannes Berg9bc383d2009-11-19 11:55:19 +01001397 * @WIPHY_FLAG_4ADDR_AP: supports 4addr mode even on AP (with a single station
1398 * on a VLAN interface)
1399 * @WIPHY_FLAG_4ADDR_STATION: supports 4addr mode even as a station
Johannes Bergc0692b82010-08-27 14:26:53 +03001400 * @WIPHY_FLAG_CONTROL_PORT_PROTOCOL: This device supports setting the
1401 * control port protocol ethertype. The device also honours the
1402 * control_port_no_encrypt flag.
Johannes Berge31b8212010-10-05 19:39:30 +02001403 * @WIPHY_FLAG_IBSS_RSN: The device supports IBSS RSN.
Johannes Bergdbd2fd62010-12-09 19:58:59 +01001404 * @WIPHY_FLAG_SUPPORTS_SEPARATE_DEFAULT_KEYS: The device supports separate
1405 * unicast and multicast TX keys.
Johannes Berg5be83de2009-11-19 00:56:28 +01001406 */
1407enum wiphy_flags {
Johannes Bergc0692b82010-08-27 14:26:53 +03001408 WIPHY_FLAG_CUSTOM_REGULATORY = BIT(0),
1409 WIPHY_FLAG_STRICT_REGULATORY = BIT(1),
1410 WIPHY_FLAG_DISABLE_BEACON_HINTS = BIT(2),
1411 WIPHY_FLAG_NETNS_OK = BIT(3),
1412 WIPHY_FLAG_PS_ON_BY_DEFAULT = BIT(4),
1413 WIPHY_FLAG_4ADDR_AP = BIT(5),
1414 WIPHY_FLAG_4ADDR_STATION = BIT(6),
1415 WIPHY_FLAG_CONTROL_PORT_PROTOCOL = BIT(7),
Jussi Kivilinna309075c2010-11-12 08:53:56 +02001416 WIPHY_FLAG_IBSS_RSN = BIT(8),
Johannes Bergdbd2fd62010-12-09 19:58:59 +01001417 WIPHY_FLAG_SUPPORTS_SEPARATE_DEFAULT_KEYS= BIT(9),
Johannes Berg5be83de2009-11-19 00:56:28 +01001418};
1419
Johannes Bergef15aac2010-01-20 12:02:33 +01001420struct mac_address {
1421 u8 addr[ETH_ALEN];
1422};
1423
Johannes Berg2e161f72010-08-12 15:38:38 +02001424struct ieee80211_txrx_stypes {
1425 u16 tx, rx;
1426};
1427
Johannes Berg5be83de2009-11-19 00:56:28 +01001428/**
1429 * struct wiphy - wireless hardware description
Luis R. Rodriguez2784fe92010-12-15 19:24:11 -08001430 * @reg_notifier: the driver's regulatory notification callback,
1431 * note that if your driver uses wiphy_apply_custom_regulatory()
1432 * the reg_notifier's request can be passed as NULL
Johannes Bergd3236552009-04-20 14:31:42 +02001433 * @regd: the driver's regulatory domain, if one was requested via
1434 * the regulatory_hint() API. This can be used by the driver
1435 * on the reg_notifier() if it chooses to ignore future
1436 * regulatory domain changes caused by other drivers.
1437 * @signal_type: signal type reported in &struct cfg80211_bss.
1438 * @cipher_suites: supported cipher suites
1439 * @n_cipher_suites: number of supported cipher suites
Jouni Malinenb9a5f8ca2009-04-20 18:39:05 +02001440 * @retry_short: Retry limit for short frames (dot11ShortRetryLimit)
1441 * @retry_long: Retry limit for long frames (dot11LongRetryLimit)
1442 * @frag_threshold: Fragmentation threshold (dot11FragmentationThreshold);
1443 * -1 = fragmentation disabled, only odd values >= 256 used
1444 * @rts_threshold: RTS threshold (dot11RTSThreshold); -1 = RTS/CTS disabled
Johannes Bergabe37c42010-06-07 11:12:27 +02001445 * @_net: the network namespace this wiphy currently lives in
Johannes Bergef15aac2010-01-20 12:02:33 +01001446 * @perm_addr: permanent MAC address of this device
1447 * @addr_mask: If the device supports multiple MAC addresses by masking,
1448 * set this to a mask with variable bits set to 1, e.g. if the last
1449 * four bits are variable then set it to 00:...:00:0f. The actual
1450 * variable bits shall be determined by the interfaces added, with
1451 * interfaces not matching the mask being rejected to be brought up.
1452 * @n_addresses: number of addresses in @addresses.
1453 * @addresses: If the device has more than one address, set this pointer
1454 * to a list of addresses (6 bytes each). The first one will be used
1455 * by default for perm_addr. In this case, the mask should be set to
1456 * all-zeroes. In this case it is assumed that the device can handle
1457 * the same number of arbitrary MAC addresses.
Johannes Bergabe37c42010-06-07 11:12:27 +02001458 * @debugfsdir: debugfs directory used for this wiphy, will be renamed
1459 * automatically on wiphy renames
1460 * @dev: (virtual) struct device for this wiphy
1461 * @wext: wireless extension handlers
1462 * @priv: driver private data (sized according to wiphy_new() parameter)
1463 * @interface_modes: bitmask of interfaces types valid for this wiphy,
1464 * must be set by driver
1465 * @flags: wiphy flags, see &enum wiphy_flags
1466 * @bss_priv_size: each BSS struct has private data allocated with it,
1467 * this variable determines its size
1468 * @max_scan_ssids: maximum number of SSIDs the device can scan for in
1469 * any given scan
1470 * @max_scan_ie_len: maximum length of user-controlled IEs device can
1471 * add to probe request frames transmitted during a scan, must not
1472 * include fixed IEs like supported rates
1473 * @coverage_class: current coverage class
1474 * @fw_version: firmware version for ethtool reporting
1475 * @hw_version: hardware version for ethtool reporting
1476 * @max_num_pmkids: maximum number of PMKIDs supported by device
1477 * @privid: a pointer that drivers can use to identify if an arbitrary
1478 * wiphy is theirs, e.g. in global notifiers
1479 * @bands: information about bands/channels supported by this device
Johannes Berg2e161f72010-08-12 15:38:38 +02001480 *
1481 * @mgmt_stypes: bitmasks of frame subtypes that can be subscribed to or
1482 * transmitted through nl80211, points to an array indexed by interface
1483 * type
Bruno Randolfa7ffac92010-12-08 13:59:24 +09001484 *
Bruno Randolf7f531e02010-12-16 11:30:22 +09001485 * @available_antennas_tx: bitmap of antennas which are available to be
1486 * configured as TX antennas. Antenna configuration commands will be
1487 * rejected unless this or @available_antennas_rx is set.
1488 *
1489 * @available_antennas_rx: bitmap of antennas which are available to be
1490 * configured as RX antennas. Antenna configuration commands will be
1491 * rejected unless this or @available_antennas_tx is set.
Johannes Berga2939112010-12-14 17:54:28 +01001492 *
1493 * @max_remain_on_channel_duration: Maximum time a remain-on-channel operation
1494 * may request, if implemented.
Johannes Bergd3236552009-04-20 14:31:42 +02001495 */
1496struct wiphy {
1497 /* assign these fields before you register the wiphy */
1498
Johannes Bergef15aac2010-01-20 12:02:33 +01001499 /* permanent MAC address(es) */
Johannes Bergd3236552009-04-20 14:31:42 +02001500 u8 perm_addr[ETH_ALEN];
Johannes Bergef15aac2010-01-20 12:02:33 +01001501 u8 addr_mask[ETH_ALEN];
1502
Johannes Bergef15aac2010-01-20 12:02:33 +01001503 struct mac_address *addresses;
Johannes Bergd3236552009-04-20 14:31:42 +02001504
Johannes Berg2e161f72010-08-12 15:38:38 +02001505 const struct ieee80211_txrx_stypes *mgmt_stypes;
1506
1507 u16 n_addresses;
1508
Johannes Bergd3236552009-04-20 14:31:42 +02001509 /* Supported interface modes, OR together BIT(NL80211_IFTYPE_...) */
1510 u16 interface_modes;
1511
Johannes Berg5be83de2009-11-19 00:56:28 +01001512 u32 flags;
Johannes Berg463d0182009-07-14 00:33:35 +02001513
Johannes Bergd3236552009-04-20 14:31:42 +02001514 enum cfg80211_signal_type signal_type;
1515
1516 int bss_priv_size;
1517 u8 max_scan_ssids;
1518 u16 max_scan_ie_len;
1519
1520 int n_cipher_suites;
1521 const u32 *cipher_suites;
1522
Jouni Malinenb9a5f8ca2009-04-20 18:39:05 +02001523 u8 retry_short;
1524 u8 retry_long;
1525 u32 frag_threshold;
1526 u32 rts_threshold;
Lukáš Turek81077e82009-12-21 22:50:47 +01001527 u8 coverage_class;
Jouni Malinenb9a5f8ca2009-04-20 18:39:05 +02001528
Kalle Valodfce95f2009-09-24 11:02:42 -07001529 char fw_version[ETHTOOL_BUSINFO_LEN];
1530 u32 hw_version;
1531
Johannes Berga2939112010-12-14 17:54:28 +01001532 u16 max_remain_on_channel_duration;
1533
Samuel Ortiz67fbb162009-11-24 23:59:15 +01001534 u8 max_num_pmkids;
1535
Bruno Randolf7f531e02010-12-16 11:30:22 +09001536 u32 available_antennas_tx;
1537 u32 available_antennas_rx;
Bruno Randolfa7ffac92010-12-08 13:59:24 +09001538
Johannes Bergd3236552009-04-20 14:31:42 +02001539 /* If multiple wiphys are registered and you're handed e.g.
1540 * a regular netdev with assigned ieee80211_ptr, you won't
1541 * know whether it points to a wiphy your driver has registered
1542 * or not. Assign this to something global to your driver to
1543 * help determine whether you own this wiphy or not. */
David Kilroycf5aa2f2009-05-16 23:13:47 +01001544 const void *privid;
Johannes Bergd3236552009-04-20 14:31:42 +02001545
1546 struct ieee80211_supported_band *bands[IEEE80211_NUM_BANDS];
1547
1548 /* Lets us get back the wiphy on the callback */
1549 int (*reg_notifier)(struct wiphy *wiphy,
1550 struct regulatory_request *request);
1551
1552 /* fields below are read-only, assigned by cfg80211 */
1553
1554 const struct ieee80211_regdomain *regd;
1555
1556 /* the item in /sys/class/ieee80211/ points to this,
1557 * you need use set_wiphy_dev() (see below) */
1558 struct device dev;
1559
1560 /* dir in debugfs: ieee80211/<wiphyname> */
1561 struct dentry *debugfsdir;
1562
Johannes Berg463d0182009-07-14 00:33:35 +02001563#ifdef CONFIG_NET_NS
1564 /* the network namespace this phy lives in currently */
1565 struct net *_net;
1566#endif
1567
Johannes Berg3d23e342009-09-29 23:27:28 +02001568#ifdef CONFIG_CFG80211_WEXT
1569 const struct iw_handler_def *wext;
1570#endif
1571
Johannes Bergd3236552009-04-20 14:31:42 +02001572 char priv[0] __attribute__((__aligned__(NETDEV_ALIGN)));
1573};
1574
Johannes Berg463d0182009-07-14 00:33:35 +02001575static inline struct net *wiphy_net(struct wiphy *wiphy)
1576{
Eric Dumazetc2d9ba92010-06-01 06:51:19 +00001577 return read_pnet(&wiphy->_net);
Johannes Berg463d0182009-07-14 00:33:35 +02001578}
1579
1580static inline void wiphy_net_set(struct wiphy *wiphy, struct net *net)
1581{
Eric Dumazetc2d9ba92010-06-01 06:51:19 +00001582 write_pnet(&wiphy->_net, net);
Johannes Berg463d0182009-07-14 00:33:35 +02001583}
Johannes Berg463d0182009-07-14 00:33:35 +02001584
Johannes Bergd3236552009-04-20 14:31:42 +02001585/**
1586 * wiphy_priv - return priv from wiphy
1587 *
1588 * @wiphy: the wiphy whose priv pointer to return
1589 */
1590static inline void *wiphy_priv(struct wiphy *wiphy)
1591{
1592 BUG_ON(!wiphy);
1593 return &wiphy->priv;
1594}
1595
1596/**
David Kilroyf1f74822009-06-18 23:21:13 +01001597 * priv_to_wiphy - return the wiphy containing the priv
1598 *
1599 * @priv: a pointer previously returned by wiphy_priv
1600 */
1601static inline struct wiphy *priv_to_wiphy(void *priv)
1602{
1603 BUG_ON(!priv);
1604 return container_of(priv, struct wiphy, priv);
1605}
1606
1607/**
Johannes Bergd3236552009-04-20 14:31:42 +02001608 * set_wiphy_dev - set device pointer for wiphy
1609 *
1610 * @wiphy: The wiphy whose device to bind
1611 * @dev: The device to parent it to
1612 */
1613static inline void set_wiphy_dev(struct wiphy *wiphy, struct device *dev)
1614{
1615 wiphy->dev.parent = dev;
1616}
1617
1618/**
1619 * wiphy_dev - get wiphy dev pointer
1620 *
1621 * @wiphy: The wiphy whose device struct to look up
1622 */
1623static inline struct device *wiphy_dev(struct wiphy *wiphy)
1624{
1625 return wiphy->dev.parent;
1626}
1627
1628/**
1629 * wiphy_name - get wiphy name
1630 *
1631 * @wiphy: The wiphy whose name to return
1632 */
Joe Perchese1db74f2010-07-26 14:39:57 -07001633static inline const char *wiphy_name(const struct wiphy *wiphy)
Johannes Bergd3236552009-04-20 14:31:42 +02001634{
1635 return dev_name(&wiphy->dev);
1636}
1637
1638/**
1639 * wiphy_new - create a new wiphy for use with cfg80211
1640 *
1641 * @ops: The configuration operations for this device
1642 * @sizeof_priv: The size of the private area to allocate
1643 *
1644 * Create a new wiphy and associate the given operations with it.
1645 * @sizeof_priv bytes are allocated for private use.
1646 *
1647 * The returned pointer must be assigned to each netdev's
1648 * ieee80211_ptr for proper operation.
1649 */
David Kilroy3dcf6702009-05-16 23:13:46 +01001650struct wiphy *wiphy_new(const struct cfg80211_ops *ops, int sizeof_priv);
Johannes Bergd3236552009-04-20 14:31:42 +02001651
1652/**
1653 * wiphy_register - register a wiphy with cfg80211
1654 *
1655 * @wiphy: The wiphy to register.
1656 *
1657 * Returns a non-negative wiphy index or a negative error code.
1658 */
1659extern int wiphy_register(struct wiphy *wiphy);
1660
1661/**
1662 * wiphy_unregister - deregister a wiphy from cfg80211
1663 *
1664 * @wiphy: The wiphy to unregister.
1665 *
1666 * After this call, no more requests can be made with this priv
1667 * pointer, but the call may sleep to wait for an outstanding
1668 * request that is being handled.
1669 */
1670extern void wiphy_unregister(struct wiphy *wiphy);
1671
1672/**
1673 * wiphy_free - free wiphy
1674 *
1675 * @wiphy: The wiphy to free
1676 */
1677extern void wiphy_free(struct wiphy *wiphy);
1678
Johannes Bergfffd0932009-07-08 14:22:54 +02001679/* internal structs */
Johannes Berg6829c872009-07-02 09:13:27 +02001680struct cfg80211_conn;
Johannes Berg19957bb2009-07-02 17:20:43 +02001681struct cfg80211_internal_bss;
Johannes Bergfffd0932009-07-08 14:22:54 +02001682struct cfg80211_cached_keys;
Johannes Berg19957bb2009-07-02 17:20:43 +02001683
1684#define MAX_AUTH_BSSES 4
Johannes Berg6829c872009-07-02 09:13:27 +02001685
Johannes Bergd3236552009-04-20 14:31:42 +02001686/**
1687 * struct wireless_dev - wireless per-netdev state
1688 *
1689 * This structure must be allocated by the driver/stack
1690 * that uses the ieee80211_ptr field in struct net_device
1691 * (this is intentional so it can be allocated along with
1692 * the netdev.)
1693 *
1694 * @wiphy: pointer to hardware description
1695 * @iftype: interface type
1696 * @list: (private) Used to collect the interfaces
1697 * @netdev: (private) Used to reference back to the netdev
1698 * @current_bss: (private) Used by the internal configuration code
Johannes Bergf444de02010-05-05 15:25:02 +02001699 * @channel: (private) Used by the internal configuration code to track
1700 * user-set AP, monitor and WDS channels for wireless extensions
Johannes Bergd3236552009-04-20 14:31:42 +02001701 * @bssid: (private) Used by the internal configuration code
1702 * @ssid: (private) Used by the internal configuration code
1703 * @ssid_len: (private) Used by the internal configuration code
Johannes Berg29cbe682010-12-03 09:20:44 +01001704 * @mesh_id_len: (private) Used by the internal configuration code
1705 * @mesh_id_up_len: (private) Used by the internal configuration code
Johannes Bergd3236552009-04-20 14:31:42 +02001706 * @wext: (private) Used by the internal wireless extensions compat code
Johannes Berg9bc383d2009-11-19 11:55:19 +01001707 * @use_4addr: indicates 4addr mode is used on this interface, must be
1708 * set by driver (if supported) on add_interface BEFORE registering the
1709 * netdev and may otherwise be used by driver read-only, will be update
1710 * by cfg80211 on change_interface
Johannes Berg2e161f72010-08-12 15:38:38 +02001711 * @mgmt_registrations: list of registrations for management frames
1712 * @mgmt_registrations_lock: lock for the list
Johannes Bergabe37c42010-06-07 11:12:27 +02001713 * @mtx: mutex used to lock data in this struct
1714 * @cleanup_work: work struct used for cleanup that can't be done directly
Johannes Bergd3236552009-04-20 14:31:42 +02001715 */
1716struct wireless_dev {
1717 struct wiphy *wiphy;
1718 enum nl80211_iftype iftype;
1719
Johannes Berg667503dd2009-07-07 03:56:11 +02001720 /* the remainder of this struct should be private to cfg80211 */
Johannes Bergd3236552009-04-20 14:31:42 +02001721 struct list_head list;
1722 struct net_device *netdev;
1723
Johannes Berg2e161f72010-08-12 15:38:38 +02001724 struct list_head mgmt_registrations;
1725 spinlock_t mgmt_registrations_lock;
Jouni Malinen026331c2010-02-15 12:53:10 +02001726
Johannes Berg667503dd2009-07-07 03:56:11 +02001727 struct mutex mtx;
1728
Johannes Bergad002392009-08-18 19:51:57 +02001729 struct work_struct cleanup_work;
1730
Johannes Berg9bc383d2009-11-19 11:55:19 +01001731 bool use_4addr;
1732
Samuel Ortizb23aa672009-07-01 21:26:54 +02001733 /* currently used for IBSS and SME - might be rearranged later */
Johannes Bergd3236552009-04-20 14:31:42 +02001734 u8 ssid[IEEE80211_MAX_SSID_LEN];
Johannes Berg29cbe682010-12-03 09:20:44 +01001735 u8 ssid_len, mesh_id_len, mesh_id_up_len;
Samuel Ortizb23aa672009-07-01 21:26:54 +02001736 enum {
1737 CFG80211_SME_IDLE,
Johannes Berg6829c872009-07-02 09:13:27 +02001738 CFG80211_SME_CONNECTING,
Samuel Ortizb23aa672009-07-01 21:26:54 +02001739 CFG80211_SME_CONNECTED,
1740 } sme_state;
Johannes Berg6829c872009-07-02 09:13:27 +02001741 struct cfg80211_conn *conn;
Johannes Bergfffd0932009-07-08 14:22:54 +02001742 struct cfg80211_cached_keys *connect_keys;
Johannes Bergd3236552009-04-20 14:31:42 +02001743
Johannes Berg667503dd2009-07-07 03:56:11 +02001744 struct list_head event_list;
1745 spinlock_t event_lock;
1746
Johannes Berg19957bb2009-07-02 17:20:43 +02001747 struct cfg80211_internal_bss *authtry_bsses[MAX_AUTH_BSSES];
1748 struct cfg80211_internal_bss *auth_bsses[MAX_AUTH_BSSES];
1749 struct cfg80211_internal_bss *current_bss; /* associated / joined */
Johannes Bergf444de02010-05-05 15:25:02 +02001750 struct ieee80211_channel *channel;
Johannes Berg19957bb2009-07-02 17:20:43 +02001751
Kalle Valoffb9eb32010-02-17 17:58:10 +02001752 bool ps;
1753 int ps_timeout;
1754
Johannes Berg3d23e342009-09-29 23:27:28 +02001755#ifdef CONFIG_CFG80211_WEXT
Johannes Bergd3236552009-04-20 14:31:42 +02001756 /* wext data */
Johannes Bergcbe8fa92009-05-09 20:09:03 +02001757 struct {
Johannes Bergc238c8a2009-07-07 03:56:06 +02001758 struct cfg80211_ibss_params ibss;
1759 struct cfg80211_connect_params connect;
Johannes Bergfffd0932009-07-08 14:22:54 +02001760 struct cfg80211_cached_keys *keys;
Johannes Bergf2129352009-07-01 21:26:56 +02001761 u8 *ie;
1762 size_t ie_len;
Johannes Bergf401a6f2009-08-07 14:51:05 +02001763 u8 bssid[ETH_ALEN], prev_bssid[ETH_ALEN];
Johannes Bergf2129352009-07-01 21:26:56 +02001764 u8 ssid[IEEE80211_MAX_SSID_LEN];
Johannes Berg08645122009-05-11 13:54:58 +02001765 s8 default_key, default_mgmt_key;
Kalle Valoffb9eb32010-02-17 17:58:10 +02001766 bool prev_bssid_valid;
Johannes Bergcbe8fa92009-05-09 20:09:03 +02001767 } wext;
Johannes Bergd3236552009-04-20 14:31:42 +02001768#endif
1769};
1770
1771/**
1772 * wdev_priv - return wiphy priv from wireless_dev
1773 *
1774 * @wdev: The wireless device whose wiphy's priv pointer to return
1775 */
1776static inline void *wdev_priv(struct wireless_dev *wdev)
1777{
1778 BUG_ON(!wdev);
1779 return wiphy_priv(wdev->wiphy);
1780}
1781
Johannes Bergd70e9692010-08-19 16:11:27 +02001782/**
1783 * DOC: Utility functions
1784 *
1785 * cfg80211 offers a number of utility functions that can be useful.
Johannes Bergd3236552009-04-20 14:31:42 +02001786 */
1787
1788/**
1789 * ieee80211_channel_to_frequency - convert channel number to frequency
Johannes Bergabe37c42010-06-07 11:12:27 +02001790 * @chan: channel number
Johannes Bergd3236552009-04-20 14:31:42 +02001791 */
1792extern int ieee80211_channel_to_frequency(int chan);
1793
1794/**
1795 * ieee80211_frequency_to_channel - convert frequency to channel number
Johannes Bergabe37c42010-06-07 11:12:27 +02001796 * @freq: center frequency
Johannes Bergd3236552009-04-20 14:31:42 +02001797 */
1798extern int ieee80211_frequency_to_channel(int freq);
1799
1800/*
1801 * Name indirection necessary because the ieee80211 code also has
1802 * a function named "ieee80211_get_channel", so if you include
1803 * cfg80211's header file you get cfg80211's version, if you try
1804 * to include both header files you'll (rightfully!) get a symbol
1805 * clash.
1806 */
1807extern struct ieee80211_channel *__ieee80211_get_channel(struct wiphy *wiphy,
1808 int freq);
1809/**
1810 * ieee80211_get_channel - get channel struct from wiphy for specified frequency
Johannes Bergabe37c42010-06-07 11:12:27 +02001811 * @wiphy: the struct wiphy to get the channel for
1812 * @freq: the center frequency of the channel
Johannes Bergd3236552009-04-20 14:31:42 +02001813 */
1814static inline struct ieee80211_channel *
1815ieee80211_get_channel(struct wiphy *wiphy, int freq)
1816{
1817 return __ieee80211_get_channel(wiphy, freq);
1818}
1819
1820/**
1821 * ieee80211_get_response_rate - get basic rate for a given rate
1822 *
1823 * @sband: the band to look for rates in
1824 * @basic_rates: bitmap of basic rates
1825 * @bitrate: the bitrate for which to find the basic rate
1826 *
1827 * This function returns the basic rate corresponding to a given
1828 * bitrate, that is the next lower bitrate contained in the basic
1829 * rate map, which is, for this function, given as a bitmap of
1830 * indices of rates in the band's bitrate table.
1831 */
1832struct ieee80211_rate *
1833ieee80211_get_response_rate(struct ieee80211_supported_band *sband,
1834 u32 basic_rates, int bitrate);
1835
1836/*
1837 * Radiotap parsing functions -- for controlled injection support
1838 *
1839 * Implemented in net/wireless/radiotap.c
1840 * Documentation in Documentation/networking/radiotap-headers.txt
1841 */
1842
Johannes Berg33e5a2f2010-02-03 10:24:30 +01001843struct radiotap_align_size {
1844 uint8_t align:4, size:4;
1845};
1846
1847struct ieee80211_radiotap_namespace {
1848 const struct radiotap_align_size *align_size;
1849 int n_bits;
1850 uint32_t oui;
1851 uint8_t subns;
1852};
1853
1854struct ieee80211_radiotap_vendor_namespaces {
1855 const struct ieee80211_radiotap_namespace *ns;
1856 int n_ns;
1857};
1858
Johannes Bergd3236552009-04-20 14:31:42 +02001859/**
1860 * struct ieee80211_radiotap_iterator - tracks walk thru present radiotap args
Johannes Berg33e5a2f2010-02-03 10:24:30 +01001861 * @this_arg_index: index of current arg, valid after each successful call
1862 * to ieee80211_radiotap_iterator_next()
1863 * @this_arg: pointer to current radiotap arg; it is valid after each
1864 * call to ieee80211_radiotap_iterator_next() but also after
1865 * ieee80211_radiotap_iterator_init() where it will point to
1866 * the beginning of the actual data portion
1867 * @this_arg_size: length of the current arg, for convenience
1868 * @current_namespace: pointer to the current namespace definition
1869 * (or internally %NULL if the current namespace is unknown)
1870 * @is_radiotap_ns: indicates whether the current namespace is the default
1871 * radiotap namespace or not
1872 *
Johannes Berg33e5a2f2010-02-03 10:24:30 +01001873 * @_rtheader: pointer to the radiotap header we are walking through
1874 * @_max_length: length of radiotap header in cpu byte ordering
1875 * @_arg_index: next argument index
1876 * @_arg: next argument pointer
1877 * @_next_bitmap: internal pointer to next present u32
1878 * @_bitmap_shifter: internal shifter for curr u32 bitmap, b0 set == arg present
1879 * @_vns: vendor namespace definitions
1880 * @_next_ns_data: beginning of the next namespace's data
1881 * @_reset_on_ext: internal; reset the arg index to 0 when going to the
1882 * next bitmap word
1883 *
1884 * Describes the radiotap parser state. Fields prefixed with an underscore
1885 * must not be used by users of the parser, only by the parser internally.
Johannes Bergd3236552009-04-20 14:31:42 +02001886 */
1887
1888struct ieee80211_radiotap_iterator {
Johannes Berg33e5a2f2010-02-03 10:24:30 +01001889 struct ieee80211_radiotap_header *_rtheader;
1890 const struct ieee80211_radiotap_vendor_namespaces *_vns;
1891 const struct ieee80211_radiotap_namespace *current_namespace;
Johannes Bergd3236552009-04-20 14:31:42 +02001892
Johannes Berg33e5a2f2010-02-03 10:24:30 +01001893 unsigned char *_arg, *_next_ns_data;
Johannes Berg67272442010-04-21 10:25:36 +02001894 __le32 *_next_bitmap;
Johannes Berg33e5a2f2010-02-03 10:24:30 +01001895
1896 unsigned char *this_arg;
1897 int this_arg_index;
1898 int this_arg_size;
1899
1900 int is_radiotap_ns;
1901
1902 int _max_length;
1903 int _arg_index;
1904 uint32_t _bitmap_shifter;
1905 int _reset_on_ext;
Johannes Bergd3236552009-04-20 14:31:42 +02001906};
1907
1908extern int ieee80211_radiotap_iterator_init(
Johannes Berg33e5a2f2010-02-03 10:24:30 +01001909 struct ieee80211_radiotap_iterator *iterator,
1910 struct ieee80211_radiotap_header *radiotap_header,
1911 int max_length, const struct ieee80211_radiotap_vendor_namespaces *vns);
Johannes Bergd3236552009-04-20 14:31:42 +02001912
1913extern int ieee80211_radiotap_iterator_next(
Johannes Berg33e5a2f2010-02-03 10:24:30 +01001914 struct ieee80211_radiotap_iterator *iterator);
1915
Johannes Bergd3236552009-04-20 14:31:42 +02001916
Zhu Yie31a16d2009-05-21 21:47:03 +08001917extern const unsigned char rfc1042_header[6];
1918extern const unsigned char bridge_tunnel_header[6];
1919
1920/**
1921 * ieee80211_get_hdrlen_from_skb - get header length from data
1922 *
1923 * Given an skb with a raw 802.11 header at the data pointer this function
1924 * returns the 802.11 header length in bytes (not including encryption
1925 * headers). If the data in the sk_buff is too short to contain a valid 802.11
1926 * header the function returns 0.
1927 *
1928 * @skb: the frame
1929 */
1930unsigned int ieee80211_get_hdrlen_from_skb(const struct sk_buff *skb);
1931
1932/**
1933 * ieee80211_hdrlen - get header length in bytes from frame control
1934 * @fc: frame control field in little-endian format
1935 */
Johannes Berg633adf12010-08-12 14:49:58 +02001936unsigned int __attribute_const__ ieee80211_hdrlen(__le16 fc);
Zhu Yie31a16d2009-05-21 21:47:03 +08001937
1938/**
Johannes Bergd70e9692010-08-19 16:11:27 +02001939 * DOC: Data path helpers
1940 *
1941 * In addition to generic utilities, cfg80211 also offers
1942 * functions that help implement the data path for devices
1943 * that do not do the 802.11/802.3 conversion on the device.
1944 */
1945
1946/**
Zhu Yie31a16d2009-05-21 21:47:03 +08001947 * ieee80211_data_to_8023 - convert an 802.11 data frame to 802.3
1948 * @skb: the 802.11 data frame
1949 * @addr: the device MAC address
1950 * @iftype: the virtual interface type
1951 */
Zhu Yieaf85ca2009-12-01 10:18:37 +08001952int ieee80211_data_to_8023(struct sk_buff *skb, const u8 *addr,
Zhu Yie31a16d2009-05-21 21:47:03 +08001953 enum nl80211_iftype iftype);
1954
1955/**
1956 * ieee80211_data_from_8023 - convert an 802.3 frame to 802.11
1957 * @skb: the 802.3 frame
1958 * @addr: the device MAC address
1959 * @iftype: the virtual interface type
1960 * @bssid: the network bssid (used only for iftype STATION and ADHOC)
1961 * @qos: build 802.11 QoS data frame
1962 */
Zhu Yieaf85ca2009-12-01 10:18:37 +08001963int ieee80211_data_from_8023(struct sk_buff *skb, const u8 *addr,
Zhu Yie31a16d2009-05-21 21:47:03 +08001964 enum nl80211_iftype iftype, u8 *bssid, bool qos);
1965
1966/**
Zhu Yieaf85ca2009-12-01 10:18:37 +08001967 * ieee80211_amsdu_to_8023s - decode an IEEE 802.11n A-MSDU frame
1968 *
1969 * Decode an IEEE 802.11n A-MSDU frame and convert it to a list of
1970 * 802.3 frames. The @list will be empty if the decode fails. The
1971 * @skb is consumed after the function returns.
1972 *
1973 * @skb: The input IEEE 802.11n A-MSDU frame.
1974 * @list: The output list of 802.3 frames. It must be allocated and
1975 * initialized by by the caller.
1976 * @addr: The device MAC address.
1977 * @iftype: The device interface type.
1978 * @extra_headroom: The hardware extra headroom for SKBs in the @list.
1979 */
1980void ieee80211_amsdu_to_8023s(struct sk_buff *skb, struct sk_buff_head *list,
1981 const u8 *addr, enum nl80211_iftype iftype,
1982 const unsigned int extra_headroom);
1983
1984/**
Zhu Yie31a16d2009-05-21 21:47:03 +08001985 * cfg80211_classify8021d - determine the 802.1p/1d tag for a data frame
1986 * @skb: the data frame
1987 */
1988unsigned int cfg80211_classify8021d(struct sk_buff *skb);
1989
Johannes Bergc21dbf92010-01-26 14:15:46 +01001990/**
1991 * cfg80211_find_ie - find information element in data
1992 *
1993 * @eid: element ID
1994 * @ies: data consisting of IEs
1995 * @len: length of data
1996 *
1997 * This function will return %NULL if the element ID could
1998 * not be found or if the element is invalid (claims to be
1999 * longer than the given data), or a pointer to the first byte
2000 * of the requested element, that is the byte containing the
2001 * element ID. There are no checks on the element length
2002 * other than having to fit into the given data.
2003 */
2004const u8 *cfg80211_find_ie(u8 eid, const u8 *ies, int len);
2005
Johannes Bergd70e9692010-08-19 16:11:27 +02002006/**
2007 * DOC: Regulatory enforcement infrastructure
2008 *
2009 * TODO
Johannes Bergd3236552009-04-20 14:31:42 +02002010 */
2011
2012/**
2013 * regulatory_hint - driver hint to the wireless core a regulatory domain
2014 * @wiphy: the wireless device giving the hint (used only for reporting
2015 * conflicts)
2016 * @alpha2: the ISO/IEC 3166 alpha2 the driver claims its regulatory domain
2017 * should be in. If @rd is set this should be NULL. Note that if you
2018 * set this to NULL you should still set rd->alpha2 to some accepted
2019 * alpha2.
2020 *
2021 * Wireless drivers can use this function to hint to the wireless core
2022 * what it believes should be the current regulatory domain by
2023 * giving it an ISO/IEC 3166 alpha2 country code it knows its regulatory
2024 * domain should be in or by providing a completely build regulatory domain.
2025 * If the driver provides an ISO/IEC 3166 alpha2 userspace will be queried
2026 * for a regulatory domain structure for the respective country.
2027 *
2028 * The wiphy must have been registered to cfg80211 prior to this call.
2029 * For cfg80211 drivers this means you must first use wiphy_register(),
2030 * for mac80211 drivers you must first use ieee80211_register_hw().
2031 *
2032 * Drivers should check the return value, its possible you can get
2033 * an -ENOMEM.
2034 */
2035extern int regulatory_hint(struct wiphy *wiphy, const char *alpha2);
2036
2037/**
Johannes Bergd3236552009-04-20 14:31:42 +02002038 * wiphy_apply_custom_regulatory - apply a custom driver regulatory domain
2039 * @wiphy: the wireless device we want to process the regulatory domain on
2040 * @regd: the custom regulatory domain to use for this wiphy
2041 *
2042 * Drivers can sometimes have custom regulatory domains which do not apply
2043 * to a specific country. Drivers can use this to apply such custom regulatory
2044 * domains. This routine must be called prior to wiphy registration. The
2045 * custom regulatory domain will be trusted completely and as such previous
2046 * default channel settings will be disregarded. If no rule is found for a
2047 * channel on the regulatory domain the channel will be disabled.
2048 */
2049extern void wiphy_apply_custom_regulatory(
2050 struct wiphy *wiphy,
2051 const struct ieee80211_regdomain *regd);
2052
2053/**
2054 * freq_reg_info - get regulatory information for the given frequency
2055 * @wiphy: the wiphy for which we want to process this rule for
2056 * @center_freq: Frequency in KHz for which we want regulatory information for
Luis R. Rodriguez038659e2009-05-02 00:37:17 -04002057 * @desired_bw_khz: the desired max bandwidth you want to use per
2058 * channel. Note that this is still 20 MHz if you want to use HT40
2059 * as HT40 makes use of two channels for its 40 MHz width bandwidth.
2060 * If set to 0 we'll assume you want the standard 20 MHz.
Johannes Bergd3236552009-04-20 14:31:42 +02002061 * @reg_rule: the regulatory rule which we have for this frequency
2062 *
2063 * Use this function to get the regulatory rule for a specific frequency on
2064 * a given wireless device. If the device has a specific regulatory domain
2065 * it wants to follow we respect that unless a country IE has been received
2066 * and processed already.
2067 *
2068 * Returns 0 if it was able to find a valid regulatory rule which does
2069 * apply to the given center_freq otherwise it returns non-zero. It will
2070 * also return -ERANGE if we determine the given center_freq does not even have
2071 * a regulatory rule for a frequency range in the center_freq's band. See
2072 * freq_in_rule_band() for our current definition of a band -- this is purely
2073 * subjective and right now its 802.11 specific.
2074 */
Luis R. Rodriguez038659e2009-05-02 00:37:17 -04002075extern int freq_reg_info(struct wiphy *wiphy,
2076 u32 center_freq,
2077 u32 desired_bw_khz,
Johannes Bergd3236552009-04-20 14:31:42 +02002078 const struct ieee80211_reg_rule **reg_rule);
2079
2080/*
2081 * Temporary wext handlers & helper functions
2082 *
2083 * In the future cfg80211 will simply assign the entire wext handler
2084 * structure to netdevs it manages, but we're not there yet.
2085 */
Johannes Bergfee52672008-11-26 22:36:31 +01002086int cfg80211_wext_giwname(struct net_device *dev,
2087 struct iw_request_info *info,
2088 char *name, char *extra);
Johannes Berge60c7742008-11-26 23:31:40 +01002089int cfg80211_wext_siwmode(struct net_device *dev, struct iw_request_info *info,
2090 u32 *mode, char *extra);
2091int cfg80211_wext_giwmode(struct net_device *dev, struct iw_request_info *info,
2092 u32 *mode, char *extra);
Johannes Berg2a519312009-02-10 21:25:55 +01002093int cfg80211_wext_siwscan(struct net_device *dev,
2094 struct iw_request_info *info,
2095 union iwreq_data *wrqu, char *extra);
2096int cfg80211_wext_giwscan(struct net_device *dev,
2097 struct iw_request_info *info,
2098 struct iw_point *data, char *extra);
Johannes Berg691597c2009-04-19 19:57:45 +02002099int cfg80211_wext_siwmlme(struct net_device *dev,
2100 struct iw_request_info *info,
2101 struct iw_point *data, char *extra);
Johannes Berg4aa188e2009-02-18 19:32:08 +01002102int cfg80211_wext_giwrange(struct net_device *dev,
2103 struct iw_request_info *info,
2104 struct iw_point *data, char *extra);
Johannes Bergf2129352009-07-01 21:26:56 +02002105int cfg80211_wext_siwgenie(struct net_device *dev,
2106 struct iw_request_info *info,
2107 struct iw_point *data, char *extra);
2108int cfg80211_wext_siwauth(struct net_device *dev,
2109 struct iw_request_info *info,
2110 struct iw_param *data, char *extra);
2111int cfg80211_wext_giwauth(struct net_device *dev,
2112 struct iw_request_info *info,
2113 struct iw_param *data, char *extra);
2114
Johannes Berg0e82ffe2009-07-27 12:01:50 +02002115int cfg80211_wext_siwfreq(struct net_device *dev,
2116 struct iw_request_info *info,
2117 struct iw_freq *freq, char *extra);
2118int cfg80211_wext_giwfreq(struct net_device *dev,
2119 struct iw_request_info *info,
2120 struct iw_freq *freq, char *extra);
Johannes Berg1f9298f2009-07-27 12:01:52 +02002121int cfg80211_wext_siwessid(struct net_device *dev,
2122 struct iw_request_info *info,
2123 struct iw_point *data, char *ssid);
2124int cfg80211_wext_giwessid(struct net_device *dev,
2125 struct iw_request_info *info,
2126 struct iw_point *data, char *ssid);
Johannes Berg99303802009-07-01 21:26:59 +02002127int cfg80211_wext_siwrate(struct net_device *dev,
2128 struct iw_request_info *info,
2129 struct iw_param *rate, char *extra);
2130int cfg80211_wext_giwrate(struct net_device *dev,
2131 struct iw_request_info *info,
2132 struct iw_param *rate, char *extra);
2133
Jouni Malinenb9a5f8ca2009-04-20 18:39:05 +02002134int cfg80211_wext_siwrts(struct net_device *dev,
2135 struct iw_request_info *info,
2136 struct iw_param *rts, char *extra);
2137int cfg80211_wext_giwrts(struct net_device *dev,
2138 struct iw_request_info *info,
2139 struct iw_param *rts, char *extra);
2140int cfg80211_wext_siwfrag(struct net_device *dev,
2141 struct iw_request_info *info,
2142 struct iw_param *frag, char *extra);
2143int cfg80211_wext_giwfrag(struct net_device *dev,
2144 struct iw_request_info *info,
2145 struct iw_param *frag, char *extra);
2146int cfg80211_wext_siwretry(struct net_device *dev,
2147 struct iw_request_info *info,
2148 struct iw_param *retry, char *extra);
2149int cfg80211_wext_giwretry(struct net_device *dev,
2150 struct iw_request_info *info,
2151 struct iw_param *retry, char *extra);
Johannes Berg08645122009-05-11 13:54:58 +02002152int cfg80211_wext_siwencodeext(struct net_device *dev,
2153 struct iw_request_info *info,
2154 struct iw_point *erq, char *extra);
2155int cfg80211_wext_siwencode(struct net_device *dev,
2156 struct iw_request_info *info,
2157 struct iw_point *erq, char *keybuf);
2158int cfg80211_wext_giwencode(struct net_device *dev,
2159 struct iw_request_info *info,
2160 struct iw_point *erq, char *keybuf);
Johannes Berg7643a2c2009-06-02 13:01:39 +02002161int cfg80211_wext_siwtxpower(struct net_device *dev,
2162 struct iw_request_info *info,
2163 union iwreq_data *data, char *keybuf);
2164int cfg80211_wext_giwtxpower(struct net_device *dev,
2165 struct iw_request_info *info,
2166 union iwreq_data *data, char *keybuf);
Johannes Berg89906462009-07-01 21:27:00 +02002167struct iw_statistics *cfg80211_wireless_stats(struct net_device *dev);
Jouni Malinenb9a5f8ca2009-04-20 18:39:05 +02002168
Johannes Bergbc92afd2009-07-01 21:26:57 +02002169int cfg80211_wext_siwpower(struct net_device *dev,
2170 struct iw_request_info *info,
2171 struct iw_param *wrq, char *extra);
2172int cfg80211_wext_giwpower(struct net_device *dev,
2173 struct iw_request_info *info,
2174 struct iw_param *wrq, char *extra);
2175
Johannes Berg562e4822009-07-27 12:01:51 +02002176int cfg80211_wext_siwap(struct net_device *dev,
2177 struct iw_request_info *info,
2178 struct sockaddr *ap_addr, char *extra);
2179int cfg80211_wext_giwap(struct net_device *dev,
2180 struct iw_request_info *info,
2181 struct sockaddr *ap_addr, char *extra);
Johannes Bergab737a42009-07-01 21:26:58 +02002182
John W. Linvillec28991a2010-07-20 12:22:40 -04002183int cfg80211_wext_siwpmksa(struct net_device *dev,
2184 struct iw_request_info *info,
2185 struct iw_point *data, char *extra);
2186
Johannes Bergd3236552009-04-20 14:31:42 +02002187/*
2188 * callbacks for asynchronous cfg80211 methods, notification
2189 * functions and BSS handling helpers
2190 */
2191
Johannes Berg2a519312009-02-10 21:25:55 +01002192/**
2193 * cfg80211_scan_done - notify that scan finished
2194 *
2195 * @request: the corresponding scan request
2196 * @aborted: set to true if the scan was aborted for any reason,
2197 * userspace will be notified of that
2198 */
2199void cfg80211_scan_done(struct cfg80211_scan_request *request, bool aborted);
2200
2201/**
Johannes Bergabe37c42010-06-07 11:12:27 +02002202 * cfg80211_inform_bss_frame - inform cfg80211 of a received BSS frame
Johannes Berg2a519312009-02-10 21:25:55 +01002203 *
2204 * @wiphy: the wiphy reporting the BSS
Johannes Bergabe37c42010-06-07 11:12:27 +02002205 * @channel: The channel the frame was received on
2206 * @mgmt: the management frame (probe response or beacon)
2207 * @len: length of the management frame
Johannes Berg77965c92009-02-18 18:45:06 +01002208 * @signal: the signal strength, type depends on the wiphy's signal_type
Johannes Berg2a519312009-02-10 21:25:55 +01002209 * @gfp: context flags
2210 *
2211 * This informs cfg80211 that BSS information was found and
2212 * the BSS should be updated/added.
2213 */
2214struct cfg80211_bss*
2215cfg80211_inform_bss_frame(struct wiphy *wiphy,
2216 struct ieee80211_channel *channel,
2217 struct ieee80211_mgmt *mgmt, size_t len,
Johannes Berg77965c92009-02-18 18:45:06 +01002218 s32 signal, gfp_t gfp);
Johannes Berg2a519312009-02-10 21:25:55 +01002219
Johannes Bergabe37c42010-06-07 11:12:27 +02002220/**
2221 * cfg80211_inform_bss - inform cfg80211 of a new BSS
2222 *
2223 * @wiphy: the wiphy reporting the BSS
2224 * @channel: The channel the frame was received on
2225 * @bssid: the BSSID of the BSS
2226 * @timestamp: the TSF timestamp sent by the peer
2227 * @capability: the capability field sent by the peer
2228 * @beacon_interval: the beacon interval announced by the peer
2229 * @ie: additional IEs sent by the peer
2230 * @ielen: length of the additional IEs
2231 * @signal: the signal strength, type depends on the wiphy's signal_type
2232 * @gfp: context flags
2233 *
2234 * This informs cfg80211 that BSS information was found and
2235 * the BSS should be updated/added.
2236 */
Jussi Kivilinna06aa7af2009-03-26 23:40:09 +02002237struct cfg80211_bss*
2238cfg80211_inform_bss(struct wiphy *wiphy,
2239 struct ieee80211_channel *channel,
2240 const u8 *bssid,
2241 u64 timestamp, u16 capability, u16 beacon_interval,
2242 const u8 *ie, size_t ielen,
2243 s32 signal, gfp_t gfp);
2244
Johannes Berg2a519312009-02-10 21:25:55 +01002245struct cfg80211_bss *cfg80211_get_bss(struct wiphy *wiphy,
2246 struct ieee80211_channel *channel,
2247 const u8 *bssid,
Johannes Berg79420f02009-02-10 21:25:59 +01002248 const u8 *ssid, size_t ssid_len,
2249 u16 capa_mask, u16 capa_val);
2250static inline struct cfg80211_bss *
2251cfg80211_get_ibss(struct wiphy *wiphy,
2252 struct ieee80211_channel *channel,
2253 const u8 *ssid, size_t ssid_len)
2254{
2255 return cfg80211_get_bss(wiphy, channel, NULL, ssid, ssid_len,
2256 WLAN_CAPABILITY_IBSS, WLAN_CAPABILITY_IBSS);
2257}
2258
Johannes Berg2a519312009-02-10 21:25:55 +01002259struct cfg80211_bss *cfg80211_get_mesh(struct wiphy *wiphy,
2260 struct ieee80211_channel *channel,
2261 const u8 *meshid, size_t meshidlen,
2262 const u8 *meshcfg);
2263void cfg80211_put_bss(struct cfg80211_bss *bss);
Johannes Bergd3236552009-04-20 14:31:42 +02002264
Johannes Bergd491af12009-02-10 21:25:58 +01002265/**
2266 * cfg80211_unlink_bss - unlink BSS from internal data structures
2267 * @wiphy: the wiphy
2268 * @bss: the bss to remove
2269 *
2270 * This function removes the given BSS from the internal data structures
2271 * thereby making it no longer show up in scan results etc. Use this
2272 * function when you detect a BSS is gone. Normally BSSes will also time
2273 * out, so it is not necessary to use this function at all.
2274 */
2275void cfg80211_unlink_bss(struct wiphy *wiphy, struct cfg80211_bss *bss);
Johannes Bergfee52672008-11-26 22:36:31 +01002276
Jouni Malinen6039f6d2009-03-19 13:39:21 +02002277/**
2278 * cfg80211_send_rx_auth - notification of processed authentication
2279 * @dev: network device
2280 * @buf: authentication frame (header + body)
2281 * @len: length of the frame data
2282 *
2283 * This function is called whenever an authentication has been processed in
Jouni Malinen1965c852009-04-22 21:38:25 +03002284 * station mode. The driver is required to call either this function or
2285 * cfg80211_send_auth_timeout() to indicate the result of cfg80211_ops::auth()
Johannes Bergcb0b4be2009-07-07 03:56:07 +02002286 * call. This function may sleep.
Jouni Malinen6039f6d2009-03-19 13:39:21 +02002287 */
Johannes Bergcb0b4be2009-07-07 03:56:07 +02002288void cfg80211_send_rx_auth(struct net_device *dev, const u8 *buf, size_t len);
Jouni Malinen6039f6d2009-03-19 13:39:21 +02002289
2290/**
Jouni Malinen1965c852009-04-22 21:38:25 +03002291 * cfg80211_send_auth_timeout - notification of timed out authentication
2292 * @dev: network device
2293 * @addr: The MAC address of the device with which the authentication timed out
Johannes Bergcb0b4be2009-07-07 03:56:07 +02002294 *
2295 * This function may sleep.
Jouni Malinen1965c852009-04-22 21:38:25 +03002296 */
Johannes Bergcb0b4be2009-07-07 03:56:07 +02002297void cfg80211_send_auth_timeout(struct net_device *dev, const u8 *addr);
Jouni Malinen1965c852009-04-22 21:38:25 +03002298
2299/**
Johannes Berga58ce432009-11-19 12:45:42 +01002300 * __cfg80211_auth_canceled - notify cfg80211 that authentication was canceled
2301 * @dev: network device
2302 * @addr: The MAC address of the device with which the authentication timed out
2303 *
2304 * When a pending authentication had no action yet, the driver may decide
2305 * to not send a deauth frame, but in that case must calls this function
2306 * to tell cfg80211 about this decision. It is only valid to call this
2307 * function within the deauth() callback.
2308 */
2309void __cfg80211_auth_canceled(struct net_device *dev, const u8 *addr);
2310
2311/**
Jouni Malinen6039f6d2009-03-19 13:39:21 +02002312 * cfg80211_send_rx_assoc - notification of processed association
2313 * @dev: network device
2314 * @buf: (re)association response frame (header + body)
2315 * @len: length of the frame data
2316 *
2317 * This function is called whenever a (re)association response has been
Jouni Malinen1965c852009-04-22 21:38:25 +03002318 * processed in station mode. The driver is required to call either this
2319 * function or cfg80211_send_assoc_timeout() to indicate the result of
Johannes Bergcb0b4be2009-07-07 03:56:07 +02002320 * cfg80211_ops::assoc() call. This function may sleep.
Jouni Malinen6039f6d2009-03-19 13:39:21 +02002321 */
Johannes Bergcb0b4be2009-07-07 03:56:07 +02002322void cfg80211_send_rx_assoc(struct net_device *dev, const u8 *buf, size_t len);
Jouni Malinen6039f6d2009-03-19 13:39:21 +02002323
2324/**
Jouni Malinen1965c852009-04-22 21:38:25 +03002325 * cfg80211_send_assoc_timeout - notification of timed out association
2326 * @dev: network device
2327 * @addr: The MAC address of the device with which the association timed out
Johannes Bergcb0b4be2009-07-07 03:56:07 +02002328 *
2329 * This function may sleep.
Jouni Malinen1965c852009-04-22 21:38:25 +03002330 */
Johannes Bergcb0b4be2009-07-07 03:56:07 +02002331void cfg80211_send_assoc_timeout(struct net_device *dev, const u8 *addr);
Jouni Malinen1965c852009-04-22 21:38:25 +03002332
2333/**
Jouni Malinen53b46b82009-03-27 20:53:56 +02002334 * cfg80211_send_deauth - notification of processed deauthentication
Jouni Malinen6039f6d2009-03-19 13:39:21 +02002335 * @dev: network device
2336 * @buf: deauthentication frame (header + body)
2337 * @len: length of the frame data
2338 *
2339 * This function is called whenever deauthentication has been processed in
Jouni Malinen53b46b82009-03-27 20:53:56 +02002340 * station mode. This includes both received deauthentication frames and
Johannes Bergcb0b4be2009-07-07 03:56:07 +02002341 * locally generated ones. This function may sleep.
Jouni Malinen6039f6d2009-03-19 13:39:21 +02002342 */
Holger Schurigce470612009-10-13 13:28:13 +02002343void cfg80211_send_deauth(struct net_device *dev, const u8 *buf, size_t len);
2344
2345/**
2346 * __cfg80211_send_deauth - notification of processed deauthentication
2347 * @dev: network device
2348 * @buf: deauthentication frame (header + body)
2349 * @len: length of the frame data
2350 *
2351 * Like cfg80211_send_deauth(), but doesn't take the wdev lock.
2352 */
2353void __cfg80211_send_deauth(struct net_device *dev, const u8 *buf, size_t len);
Jouni Malinen6039f6d2009-03-19 13:39:21 +02002354
2355/**
Jouni Malinen53b46b82009-03-27 20:53:56 +02002356 * cfg80211_send_disassoc - notification of processed disassociation
Jouni Malinen6039f6d2009-03-19 13:39:21 +02002357 * @dev: network device
2358 * @buf: disassociation response frame (header + body)
2359 * @len: length of the frame data
2360 *
2361 * This function is called whenever disassociation has been processed in
Jouni Malinen53b46b82009-03-27 20:53:56 +02002362 * station mode. This includes both received disassociation frames and locally
Johannes Bergcb0b4be2009-07-07 03:56:07 +02002363 * generated ones. This function may sleep.
Jouni Malinen6039f6d2009-03-19 13:39:21 +02002364 */
Holger Schurigce470612009-10-13 13:28:13 +02002365void cfg80211_send_disassoc(struct net_device *dev, const u8 *buf, size_t len);
2366
2367/**
2368 * __cfg80211_send_disassoc - notification of processed disassociation
2369 * @dev: network device
2370 * @buf: disassociation response frame (header + body)
2371 * @len: length of the frame data
2372 *
2373 * Like cfg80211_send_disassoc(), but doesn't take the wdev lock.
2374 */
2375void __cfg80211_send_disassoc(struct net_device *dev, const u8 *buf,
2376 size_t len);
Jouni Malinen6039f6d2009-03-19 13:39:21 +02002377
Kalle Valoa08c1c12009-03-22 21:57:28 +02002378/**
Jouni Malinencf4e5942010-12-16 00:52:40 +02002379 * cfg80211_send_unprot_deauth - notification of unprotected deauthentication
2380 * @dev: network device
2381 * @buf: deauthentication frame (header + body)
2382 * @len: length of the frame data
2383 *
2384 * This function is called whenever a received Deauthentication frame has been
2385 * dropped in station mode because of MFP being used but the Deauthentication
2386 * frame was not protected. This function may sleep.
2387 */
2388void cfg80211_send_unprot_deauth(struct net_device *dev, const u8 *buf,
2389 size_t len);
2390
2391/**
2392 * cfg80211_send_unprot_disassoc - notification of unprotected disassociation
2393 * @dev: network device
2394 * @buf: disassociation frame (header + body)
2395 * @len: length of the frame data
2396 *
2397 * This function is called whenever a received Disassociation frame has been
2398 * dropped in station mode because of MFP being used but the Disassociation
2399 * frame was not protected. This function may sleep.
2400 */
2401void cfg80211_send_unprot_disassoc(struct net_device *dev, const u8 *buf,
2402 size_t len);
2403
2404/**
Jouni Malinena3b8b052009-03-27 21:59:49 +02002405 * cfg80211_michael_mic_failure - notification of Michael MIC failure (TKIP)
2406 * @dev: network device
2407 * @addr: The source MAC address of the frame
2408 * @key_type: The key type that the received frame used
2409 * @key_id: Key identifier (0..3)
2410 * @tsc: The TSC value of the frame that generated the MIC failure (6 octets)
Johannes Berge6d6e342009-07-01 21:26:47 +02002411 * @gfp: allocation flags
Jouni Malinena3b8b052009-03-27 21:59:49 +02002412 *
2413 * This function is called whenever the local MAC detects a MIC failure in a
2414 * received frame. This matches with MLME-MICHAELMICFAILURE.indication()
2415 * primitive.
2416 */
2417void cfg80211_michael_mic_failure(struct net_device *dev, const u8 *addr,
2418 enum nl80211_key_type key_type, int key_id,
Johannes Berge6d6e342009-07-01 21:26:47 +02002419 const u8 *tsc, gfp_t gfp);
Jouni Malinena3b8b052009-03-27 21:59:49 +02002420
Johannes Berg04a773a2009-04-19 21:24:32 +02002421/**
2422 * cfg80211_ibss_joined - notify cfg80211 that device joined an IBSS
2423 *
2424 * @dev: network device
2425 * @bssid: the BSSID of the IBSS joined
2426 * @gfp: allocation flags
2427 *
2428 * This function notifies cfg80211 that the device joined an IBSS or
2429 * switched to a different BSSID. Before this function can be called,
2430 * either a beacon has to have been received from the IBSS, or one of
2431 * the cfg80211_inform_bss{,_frame} functions must have been called
2432 * with the locally generated beacon -- this guarantees that there is
2433 * always a scan result for this IBSS. cfg80211 will handle the rest.
2434 */
2435void cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid, gfp_t gfp);
2436
Johannes Berg1f87f7d2009-06-02 13:01:41 +02002437/**
Johannes Bergd70e9692010-08-19 16:11:27 +02002438 * DOC: RFkill integration
2439 *
2440 * RFkill integration in cfg80211 is almost invisible to drivers,
2441 * as cfg80211 automatically registers an rfkill instance for each
2442 * wireless device it knows about. Soft kill is also translated
2443 * into disconnecting and turning all interfaces off, drivers are
2444 * expected to turn off the device when all interfaces are down.
2445 *
2446 * However, devices may have a hard RFkill line, in which case they
2447 * also need to interact with the rfkill subsystem, via cfg80211.
2448 * They can do this with a few helper functions documented here.
2449 */
2450
2451/**
Johannes Berg1f87f7d2009-06-02 13:01:41 +02002452 * wiphy_rfkill_set_hw_state - notify cfg80211 about hw block state
2453 * @wiphy: the wiphy
2454 * @blocked: block status
2455 */
2456void wiphy_rfkill_set_hw_state(struct wiphy *wiphy, bool blocked);
2457
2458/**
2459 * wiphy_rfkill_start_polling - start polling rfkill
2460 * @wiphy: the wiphy
2461 */
2462void wiphy_rfkill_start_polling(struct wiphy *wiphy);
2463
2464/**
2465 * wiphy_rfkill_stop_polling - stop polling rfkill
2466 * @wiphy: the wiphy
2467 */
2468void wiphy_rfkill_stop_polling(struct wiphy *wiphy);
2469
Johannes Bergaff89a92009-07-01 21:26:51 +02002470#ifdef CONFIG_NL80211_TESTMODE
2471/**
Johannes Bergd70e9692010-08-19 16:11:27 +02002472 * DOC: Test mode
2473 *
2474 * Test mode is a set of utility functions to allow drivers to
2475 * interact with driver-specific tools to aid, for instance,
2476 * factory programming.
2477 *
2478 * This chapter describes how drivers interact with it, for more
2479 * information see the nl80211 book's chapter on it.
2480 */
2481
2482/**
Johannes Bergaff89a92009-07-01 21:26:51 +02002483 * cfg80211_testmode_alloc_reply_skb - allocate testmode reply
2484 * @wiphy: the wiphy
2485 * @approxlen: an upper bound of the length of the data that will
2486 * be put into the skb
2487 *
2488 * This function allocates and pre-fills an skb for a reply to
2489 * the testmode command. Since it is intended for a reply, calling
2490 * it outside of the @testmode_cmd operation is invalid.
2491 *
2492 * The returned skb (or %NULL if any errors happen) is pre-filled
2493 * with the wiphy index and set up in a way that any data that is
2494 * put into the skb (with skb_put(), nla_put() or similar) will end
2495 * up being within the %NL80211_ATTR_TESTDATA attribute, so all that
2496 * needs to be done with the skb is adding data for the corresponding
2497 * userspace tool which can then read that data out of the testdata
2498 * attribute. You must not modify the skb in any other way.
2499 *
2500 * When done, call cfg80211_testmode_reply() with the skb and return
2501 * its error code as the result of the @testmode_cmd operation.
2502 */
2503struct sk_buff *cfg80211_testmode_alloc_reply_skb(struct wiphy *wiphy,
2504 int approxlen);
2505
2506/**
2507 * cfg80211_testmode_reply - send the reply skb
2508 * @skb: The skb, must have been allocated with
2509 * cfg80211_testmode_alloc_reply_skb()
2510 *
2511 * Returns an error code or 0 on success, since calling this
2512 * function will usually be the last thing before returning
2513 * from the @testmode_cmd you should return the error code.
2514 * Note that this function consumes the skb regardless of the
2515 * return value.
2516 */
2517int cfg80211_testmode_reply(struct sk_buff *skb);
2518
2519/**
2520 * cfg80211_testmode_alloc_event_skb - allocate testmode event
2521 * @wiphy: the wiphy
2522 * @approxlen: an upper bound of the length of the data that will
2523 * be put into the skb
2524 * @gfp: allocation flags
2525 *
2526 * This function allocates and pre-fills an skb for an event on the
2527 * testmode multicast group.
2528 *
2529 * The returned skb (or %NULL if any errors happen) is set up in the
2530 * same way as with cfg80211_testmode_alloc_reply_skb() but prepared
2531 * for an event. As there, you should simply add data to it that will
2532 * then end up in the %NL80211_ATTR_TESTDATA attribute. Again, you must
2533 * not modify the skb in any other way.
2534 *
2535 * When done filling the skb, call cfg80211_testmode_event() with the
2536 * skb to send the event.
2537 */
2538struct sk_buff *cfg80211_testmode_alloc_event_skb(struct wiphy *wiphy,
2539 int approxlen, gfp_t gfp);
2540
2541/**
2542 * cfg80211_testmode_event - send the event
2543 * @skb: The skb, must have been allocated with
2544 * cfg80211_testmode_alloc_event_skb()
2545 * @gfp: allocation flags
2546 *
2547 * This function sends the given @skb, which must have been allocated
2548 * by cfg80211_testmode_alloc_event_skb(), as an event. It always
2549 * consumes it.
2550 */
2551void cfg80211_testmode_event(struct sk_buff *skb, gfp_t gfp);
2552
2553#define CFG80211_TESTMODE_CMD(cmd) .testmode_cmd = (cmd),
2554#else
2555#define CFG80211_TESTMODE_CMD(cmd)
2556#endif
2557
Samuel Ortizb23aa672009-07-01 21:26:54 +02002558/**
2559 * cfg80211_connect_result - notify cfg80211 of connection result
2560 *
2561 * @dev: network device
2562 * @bssid: the BSSID of the AP
2563 * @req_ie: association request IEs (maybe be %NULL)
2564 * @req_ie_len: association request IEs length
2565 * @resp_ie: association response IEs (may be %NULL)
2566 * @resp_ie_len: assoc response IEs length
2567 * @status: status code, 0 for successful connection, use
2568 * %WLAN_STATUS_UNSPECIFIED_FAILURE if your device cannot give you
2569 * the real status code for failures.
2570 * @gfp: allocation flags
2571 *
2572 * It should be called by the underlying driver whenever connect() has
2573 * succeeded.
2574 */
2575void cfg80211_connect_result(struct net_device *dev, const u8 *bssid,
2576 const u8 *req_ie, size_t req_ie_len,
2577 const u8 *resp_ie, size_t resp_ie_len,
2578 u16 status, gfp_t gfp);
2579
2580/**
2581 * cfg80211_roamed - notify cfg80211 of roaming
2582 *
2583 * @dev: network device
2584 * @bssid: the BSSID of the new AP
2585 * @req_ie: association request IEs (maybe be %NULL)
2586 * @req_ie_len: association request IEs length
2587 * @resp_ie: association response IEs (may be %NULL)
2588 * @resp_ie_len: assoc response IEs length
2589 * @gfp: allocation flags
2590 *
2591 * It should be called by the underlying driver whenever it roamed
2592 * from one AP to another while connected.
2593 */
2594void cfg80211_roamed(struct net_device *dev, const u8 *bssid,
2595 const u8 *req_ie, size_t req_ie_len,
2596 const u8 *resp_ie, size_t resp_ie_len, gfp_t gfp);
2597
2598/**
2599 * cfg80211_disconnected - notify cfg80211 that connection was dropped
2600 *
2601 * @dev: network device
2602 * @ie: information elements of the deauth/disassoc frame (may be %NULL)
2603 * @ie_len: length of IEs
2604 * @reason: reason code for the disconnection, set it to 0 if unknown
2605 * @gfp: allocation flags
2606 *
2607 * After it calls this function, the driver should enter an idle state
2608 * and not try to connect to any AP any more.
2609 */
2610void cfg80211_disconnected(struct net_device *dev, u16 reason,
2611 u8 *ie, size_t ie_len, gfp_t gfp);
2612
Jouni Malinen9588bbd2009-12-23 13:15:41 +01002613/**
2614 * cfg80211_ready_on_channel - notification of remain_on_channel start
2615 * @dev: network device
2616 * @cookie: the request cookie
2617 * @chan: The current channel (from remain_on_channel request)
2618 * @channel_type: Channel type
2619 * @duration: Duration in milliseconds that the driver intents to remain on the
2620 * channel
2621 * @gfp: allocation flags
2622 */
2623void cfg80211_ready_on_channel(struct net_device *dev, u64 cookie,
2624 struct ieee80211_channel *chan,
2625 enum nl80211_channel_type channel_type,
2626 unsigned int duration, gfp_t gfp);
2627
2628/**
2629 * cfg80211_remain_on_channel_expired - remain_on_channel duration expired
2630 * @dev: network device
2631 * @cookie: the request cookie
2632 * @chan: The current channel (from remain_on_channel request)
2633 * @channel_type: Channel type
2634 * @gfp: allocation flags
2635 */
2636void cfg80211_remain_on_channel_expired(struct net_device *dev,
2637 u64 cookie,
2638 struct ieee80211_channel *chan,
2639 enum nl80211_channel_type channel_type,
2640 gfp_t gfp);
Samuel Ortizb23aa672009-07-01 21:26:54 +02002641
Johannes Berg98b62182009-12-23 13:15:44 +01002642
2643/**
2644 * cfg80211_new_sta - notify userspace about station
2645 *
2646 * @dev: the netdev
2647 * @mac_addr: the station's address
2648 * @sinfo: the station information
2649 * @gfp: allocation flags
2650 */
2651void cfg80211_new_sta(struct net_device *dev, const u8 *mac_addr,
2652 struct station_info *sinfo, gfp_t gfp);
2653
Jouni Malinen026331c2010-02-15 12:53:10 +02002654/**
Johannes Berg2e161f72010-08-12 15:38:38 +02002655 * cfg80211_rx_mgmt - notification of received, unprocessed management frame
Jouni Malinen026331c2010-02-15 12:53:10 +02002656 * @dev: network device
2657 * @freq: Frequency on which the frame was received in MHz
Johannes Berg2e161f72010-08-12 15:38:38 +02002658 * @buf: Management frame (header + body)
Jouni Malinen026331c2010-02-15 12:53:10 +02002659 * @len: length of the frame data
2660 * @gfp: context flags
Johannes Berg2e161f72010-08-12 15:38:38 +02002661 *
2662 * Returns %true if a user space application has registered for this frame.
2663 * For action frames, that makes it responsible for rejecting unrecognized
2664 * action frames; %false otherwise, in which case for action frames the
2665 * driver is responsible for rejecting the frame.
Jouni Malinen026331c2010-02-15 12:53:10 +02002666 *
2667 * This function is called whenever an Action frame is received for a station
2668 * mode interface, but is not processed in kernel.
2669 */
Johannes Berg2e161f72010-08-12 15:38:38 +02002670bool cfg80211_rx_mgmt(struct net_device *dev, int freq, const u8 *buf,
2671 size_t len, gfp_t gfp);
Jouni Malinen026331c2010-02-15 12:53:10 +02002672
2673/**
Johannes Berg2e161f72010-08-12 15:38:38 +02002674 * cfg80211_mgmt_tx_status - notification of TX status for management frame
Jouni Malinen026331c2010-02-15 12:53:10 +02002675 * @dev: network device
Johannes Berg2e161f72010-08-12 15:38:38 +02002676 * @cookie: Cookie returned by cfg80211_ops::mgmt_tx()
2677 * @buf: Management frame (header + body)
Jouni Malinen026331c2010-02-15 12:53:10 +02002678 * @len: length of the frame data
2679 * @ack: Whether frame was acknowledged
2680 * @gfp: context flags
2681 *
Johannes Berg2e161f72010-08-12 15:38:38 +02002682 * This function is called whenever a management frame was requested to be
2683 * transmitted with cfg80211_ops::mgmt_tx() to report the TX status of the
Jouni Malinen026331c2010-02-15 12:53:10 +02002684 * transmission attempt.
2685 */
Johannes Berg2e161f72010-08-12 15:38:38 +02002686void cfg80211_mgmt_tx_status(struct net_device *dev, u64 cookie,
2687 const u8 *buf, size_t len, bool ack, gfp_t gfp);
Jouni Malinen026331c2010-02-15 12:53:10 +02002688
Juuso Oikarinend6dc1a32010-03-23 09:02:33 +02002689
2690/**
2691 * cfg80211_cqm_rssi_notify - connection quality monitoring rssi event
2692 * @dev: network device
2693 * @rssi_event: the triggered RSSI event
2694 * @gfp: context flags
2695 *
2696 * This function is called when a configured connection quality monitoring
2697 * rssi threshold reached event occurs.
2698 */
2699void cfg80211_cqm_rssi_notify(struct net_device *dev,
2700 enum nl80211_cqm_rssi_threshold_event rssi_event,
2701 gfp_t gfp);
2702
Johannes Bergc063dbf2010-11-24 08:10:05 +01002703/**
2704 * cfg80211_cqm_pktloss_notify - notify userspace about packetloss to peer
2705 * @dev: network device
2706 * @peer: peer's MAC address
2707 * @num_packets: how many packets were lost -- should be a fixed threshold
2708 * but probably no less than maybe 50, or maybe a throughput dependent
2709 * threshold (to account for temporary interference)
2710 * @gfp: context flags
2711 */
2712void cfg80211_cqm_pktloss_notify(struct net_device *dev,
2713 const u8 *peer, u32 num_packets, gfp_t gfp);
2714
Joe Perchese1db74f2010-07-26 14:39:57 -07002715/* Logging, debugging and troubleshooting/diagnostic helpers. */
2716
2717/* wiphy_printk helpers, similar to dev_printk */
2718
2719#define wiphy_printk(level, wiphy, format, args...) \
Joe Perches9c376632010-08-20 15:13:59 -07002720 dev_printk(level, &(wiphy)->dev, format, ##args)
Joe Perchese1db74f2010-07-26 14:39:57 -07002721#define wiphy_emerg(wiphy, format, args...) \
Joe Perches9c376632010-08-20 15:13:59 -07002722 dev_emerg(&(wiphy)->dev, format, ##args)
Joe Perchese1db74f2010-07-26 14:39:57 -07002723#define wiphy_alert(wiphy, format, args...) \
Joe Perches9c376632010-08-20 15:13:59 -07002724 dev_alert(&(wiphy)->dev, format, ##args)
Joe Perchese1db74f2010-07-26 14:39:57 -07002725#define wiphy_crit(wiphy, format, args...) \
Joe Perches9c376632010-08-20 15:13:59 -07002726 dev_crit(&(wiphy)->dev, format, ##args)
Joe Perchese1db74f2010-07-26 14:39:57 -07002727#define wiphy_err(wiphy, format, args...) \
Joe Perches9c376632010-08-20 15:13:59 -07002728 dev_err(&(wiphy)->dev, format, ##args)
Joe Perchese1db74f2010-07-26 14:39:57 -07002729#define wiphy_warn(wiphy, format, args...) \
Joe Perches9c376632010-08-20 15:13:59 -07002730 dev_warn(&(wiphy)->dev, format, ##args)
Joe Perchese1db74f2010-07-26 14:39:57 -07002731#define wiphy_notice(wiphy, format, args...) \
Joe Perches9c376632010-08-20 15:13:59 -07002732 dev_notice(&(wiphy)->dev, format, ##args)
Joe Perchese1db74f2010-07-26 14:39:57 -07002733#define wiphy_info(wiphy, format, args...) \
Joe Perches9c376632010-08-20 15:13:59 -07002734 dev_info(&(wiphy)->dev, format, ##args)
Joe Perches073730d2010-07-26 14:40:00 -07002735
Joe Perches9c376632010-08-20 15:13:59 -07002736#define wiphy_debug(wiphy, format, args...) \
Joe Perchese1db74f2010-07-26 14:39:57 -07002737 wiphy_printk(KERN_DEBUG, wiphy, format, ##args)
Joe Perches9c376632010-08-20 15:13:59 -07002738
Joe Perchese1db74f2010-07-26 14:39:57 -07002739#define wiphy_dbg(wiphy, format, args...) \
Joe Perches9c376632010-08-20 15:13:59 -07002740 dev_dbg(&(wiphy)->dev, format, ##args)
Joe Perchese1db74f2010-07-26 14:39:57 -07002741
2742#if defined(VERBOSE_DEBUG)
2743#define wiphy_vdbg wiphy_dbg
2744#else
Joe Perchese1db74f2010-07-26 14:39:57 -07002745#define wiphy_vdbg(wiphy, format, args...) \
2746({ \
2747 if (0) \
2748 wiphy_printk(KERN_DEBUG, wiphy, format, ##args); \
Joe Perches9c376632010-08-20 15:13:59 -07002749 0; \
Joe Perchese1db74f2010-07-26 14:39:57 -07002750})
2751#endif
2752
2753/*
2754 * wiphy_WARN() acts like wiphy_printk(), but with the key difference
2755 * of using a WARN/WARN_ON to get the message out, including the
2756 * file/line information and a backtrace.
2757 */
2758#define wiphy_WARN(wiphy, format, args...) \
2759 WARN(1, "wiphy: %s\n" format, wiphy_name(wiphy), ##args);
2760
Johannes Berg704232c2007-04-23 12:20:05 -07002761#endif /* __NET_CFG80211_H */