blob: 5e5a8fa005f8befc1ca9eb4814b12afbf8e3ccea [file] [log] [blame]
Apelete Seketeli10434d22013-12-19 21:42:26 +01001/*
2 * Ingenic JZ4740 "glue layer"
3 *
4 * Copyright (C) 2013, Apelete Seketeli <apelete@seketeli.net>
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
10 *
11 * You should have received a copy of the GNU General Public License along
12 * with this program; if not, write to the Free Software Foundation, Inc.,
13 * 675 Mass Ave, Cambridge, MA 02139, USA.
14 */
15
16#include <linux/clk.h>
17#include <linux/dma-mapping.h>
18#include <linux/errno.h>
19#include <linux/kernel.h>
20#include <linux/module.h>
21#include <linux/platform_device.h>
Apelete Seketeli3d75bd32014-07-06 19:58:03 +020022#include <linux/usb/usb_phy_generic.h>
Apelete Seketeli10434d22013-12-19 21:42:26 +010023
24#include "musb_core.h"
25
26struct jz4740_glue {
27 struct device *dev;
28 struct platform_device *musb;
29 struct clk *clk;
30};
31
32static irqreturn_t jz4740_musb_interrupt(int irq, void *__hci)
33{
34 unsigned long flags;
35 irqreturn_t retval = IRQ_NONE;
36 struct musb *musb = __hci;
37
38 spin_lock_irqsave(&musb->lock, flags);
39
40 musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB);
41 musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX);
42 musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX);
43
44 /*
45 * The controller is gadget only, the state of the host mode IRQ bits is
46 * undefined. Mask them to make sure that the musb driver core will
47 * never see them set
48 */
49 musb->int_usb &= MUSB_INTR_SUSPEND | MUSB_INTR_RESUME |
50 MUSB_INTR_RESET | MUSB_INTR_SOF;
51
52 if (musb->int_usb || musb->int_tx || musb->int_rx)
53 retval = musb_interrupt(musb);
54
55 spin_unlock_irqrestore(&musb->lock, flags);
56
57 return retval;
58}
59
60static struct musb_fifo_cfg jz4740_musb_fifo_cfg[] = {
61{ .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, },
62{ .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, },
63{ .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 64, },
64};
65
66static struct musb_hdrc_config jz4740_musb_config = {
67 /* Silicon does not implement USB OTG. */
68 .multipoint = 0,
69 /* Max EPs scanned, driver will decide which EP can be used. */
70 .num_eps = 4,
71 /* RAMbits needed to configure EPs from table */
72 .ram_bits = 9,
73 .fifo_cfg = jz4740_musb_fifo_cfg,
74 .fifo_cfg_size = ARRAY_SIZE(jz4740_musb_fifo_cfg),
75};
76
77static struct musb_hdrc_platform_data jz4740_musb_platform_data = {
78 .mode = MUSB_PERIPHERAL,
79 .config = &jz4740_musb_config,
80};
81
82static int jz4740_musb_init(struct musb *musb)
83{
Apelete Seketeli3d75bd32014-07-06 19:58:03 +020084 usb_phy_generic_register();
Apelete Seketeli10434d22013-12-19 21:42:26 +010085 musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
86 if (!musb->xceiv) {
87 pr_err("HS UDC: no transceiver configured\n");
88 return -ENODEV;
89 }
90
91 /* Silicon does not implement ConfigData register.
92 * Set dyn_fifo to avoid reading EP config from hardware.
93 */
94 musb->dyn_fifo = true;
95
96 musb->isr = jz4740_musb_interrupt;
97
98 return 0;
99}
100
101static int jz4740_musb_exit(struct musb *musb)
102{
103 usb_put_phy(musb->xceiv);
104
105 return 0;
106}
107
Tony Lindgren7f6283e2015-05-01 12:29:28 -0700108/*
109 * DMA has not been confirmed to work with CONFIG_USB_INVENTRA_DMA,
110 * so let's not set up the dma function pointers yet.
111 */
Apelete Seketeli10434d22013-12-19 21:42:26 +0100112static const struct musb_platform_ops jz4740_musb_ops = {
Tony Lindgrenf8e9f34f2015-05-01 12:29:27 -0700113 .quirks = MUSB_DMA_INVENTRA | MUSB_INDEXED_EP,
Tony Lindgren8a77f052014-11-24 11:05:04 -0800114 .fifo_mode = 2,
Apelete Seketeli10434d22013-12-19 21:42:26 +0100115 .init = jz4740_musb_init,
116 .exit = jz4740_musb_exit,
117};
118
119static int jz4740_probe(struct platform_device *pdev)
120{
121 struct musb_hdrc_platform_data *pdata = &jz4740_musb_platform_data;
122 struct platform_device *musb;
123 struct jz4740_glue *glue;
124 struct clk *clk;
125 int ret;
126
127 glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
128 if (!glue)
129 return -ENOMEM;
130
131 musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO);
132 if (!musb) {
133 dev_err(&pdev->dev, "failed to allocate musb device\n");
134 return -ENOMEM;
135 }
136
137 clk = devm_clk_get(&pdev->dev, "udc");
138 if (IS_ERR(clk)) {
139 dev_err(&pdev->dev, "failed to get clock\n");
140 ret = PTR_ERR(clk);
141 goto err_platform_device_put;
142 }
143
144 ret = clk_prepare_enable(clk);
145 if (ret) {
146 dev_err(&pdev->dev, "failed to enable clock\n");
147 goto err_platform_device_put;
148 }
149
150 musb->dev.parent = &pdev->dev;
151
152 glue->dev = &pdev->dev;
153 glue->musb = musb;
154 glue->clk = clk;
155
156 pdata->platform_ops = &jz4740_musb_ops;
157
158 platform_set_drvdata(pdev, glue);
159
160 ret = platform_device_add_resources(musb, pdev->resource,
161 pdev->num_resources);
162 if (ret) {
163 dev_err(&pdev->dev, "failed to add resources\n");
164 goto err_clk_disable;
165 }
166
167 ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
168 if (ret) {
169 dev_err(&pdev->dev, "failed to add platform_data\n");
170 goto err_clk_disable;
171 }
172
173 ret = platform_device_add(musb);
174 if (ret) {
175 dev_err(&pdev->dev, "failed to register musb device\n");
176 goto err_clk_disable;
177 }
178
179 return 0;
180
181err_clk_disable:
182 clk_disable_unprepare(clk);
183err_platform_device_put:
184 platform_device_put(musb);
185 return ret;
186}
187
188static int jz4740_remove(struct platform_device *pdev)
189{
190 struct jz4740_glue *glue = platform_get_drvdata(pdev);
191
192 platform_device_unregister(glue->musb);
Apelete Seketeli3d75bd32014-07-06 19:58:03 +0200193 usb_phy_generic_unregister(pdev);
Apelete Seketeli10434d22013-12-19 21:42:26 +0100194 clk_disable_unprepare(glue->clk);
195
196 return 0;
197}
198
199static struct platform_driver jz4740_driver = {
200 .probe = jz4740_probe,
201 .remove = jz4740_remove,
202 .driver = {
203 .name = "musb-jz4740",
204 },
205};
206
207MODULE_DESCRIPTION("JZ4740 MUSB Glue Layer");
208MODULE_AUTHOR("Apelete Seketeli <apelete@seketeli.net>");
209MODULE_LICENSE("GPL v2");
210module_platform_driver(jz4740_driver);