blob: c0c77f82d051ee4ab8dcc910f4278e7458528f22 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001#
Dominik Brodowskibf45d9b02005-07-07 17:58:58 -07002# PCCARD (PCMCIA/CardBus) bus subsystem configuration
Linus Torvalds1da177e2005-04-16 15:20:36 -07003#
4
5menu "PCCARD (PCMCIA/CardBus) support"
6
7config PCCARD
8 tristate "PCCard (PCMCIA/CardBus) support"
Andrew Morton135c2942006-07-10 04:43:48 -07009 depends on HOTPLUG
Linus Torvalds1da177e2005-04-16 15:20:36 -070010 ---help---
11 Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
12 computer. These are credit-card size devices such as network cards,
13 modems or hard drives often used with laptops computers. There are
Dominik Brodowski9a5555b2005-06-27 16:28:47 -070014 actually two varieties of these cards: 16 bit PCMCIA and 32 bit
15 CardBus cards.
Linus Torvalds1da177e2005-04-16 15:20:36 -070016
17 To compile this driver as modules, choose M here: the
18 module will be called pcmcia_core.
19
20if PCCARD
21
22config PCMCIA_DEBUG
23 bool "Enable PCCARD debugging"
24 help
25 Say Y here to enable PCMCIA subsystem debugging. You
26 will need to choose the debugging level either via the
27 kernel command line, or module options depending whether
28 you build the PCMCIA as modules.
29
30 The kernel command line options are:
31 pcmcia_core.pc_debug=N
Dominik Brodowskibf45d9b02005-07-07 17:58:58 -070032 pcmcia.pc_debug=N
Linus Torvalds1da177e2005-04-16 15:20:36 -070033 sa11xx_core.pc_debug=N
34
35 The module option is called pc_debug=N
36
37 In all the above examples, N is the debugging verbosity
38 level.
39
40config PCMCIA
41 tristate "16-bit PCMCIA support"
Dominik Brodowskif861bd22005-06-27 16:28:57 -070042 select CRC32
Linus Torvalds1da177e2005-04-16 15:20:36 -070043 default y
44 ---help---
45 This option enables support for 16-bit PCMCIA cards. Most older
46 PC-cards are such 16-bit PCMCIA cards, so unless you know you're
47 only using 32-bit CardBus cards, say Y or M here.
48
Dominik Brodowski9a5555b2005-06-27 16:28:47 -070049 To use 16-bit PCMCIA cards, you will need supporting software in
50 most cases. (see the file <file:Documentation/Changes> for
51 location and details).
Linus Torvalds1da177e2005-04-16 15:20:36 -070052
53 To compile this driver as modules, choose M here: the
54 module will be called pcmcia.
55
56 If unsure, say Y.
57
Dominik Brodowskidaa95172005-06-27 16:28:14 -070058config PCMCIA_LOAD_CIS
59 bool "Load CIS updates from userspace (EXPERIMENTAL)"
60 depends on PCMCIA && EXPERIMENTAL
61 select FW_LOADER
62 default y
63 help
64 Some PCMCIA cards require an updated Card Information Structure (CIS)
65 to be loaded from userspace to work correctly. If you say Y here,
66 and your userspace is arranged correctly, this will be loaded
67 automatically using the in-kernel firmware loader and the hotplug
68 subsystem, instead of relying on cardmgr from pcmcia-cs to do so.
69
70 If unsure, say Y.
71
Dominik Brodowski9a5555b2005-06-27 16:28:47 -070072config PCMCIA_IOCTL
Dominik Brodowskibf45d9b02005-07-07 17:58:58 -070073 bool "PCMCIA control ioctl (obsolete)"
Dominik Brodowski9a5555b2005-06-27 16:28:47 -070074 depends on PCMCIA
75 default y
76 help
77 If you say Y here, the deprecated ioctl interface to the PCMCIA
78 subsystem will be built. It is needed by cardmgr and cardctl
79 (pcmcia-cs) to function properly.
80
Dominik Brodowskibf45d9b02005-07-07 17:58:58 -070081 You should use the new pcmciautils package instead (see
82 <file:Documentation/Changes> for location and details).
Dominik Brodowski9a5555b2005-06-27 16:28:47 -070083
84 If unsure, say Y.
85
Linus Torvalds1da177e2005-04-16 15:20:36 -070086config CARDBUS
87 bool "32-bit CardBus support"
88 depends on PCI
89 default y
90 ---help---
91 CardBus is a bus mastering architecture for PC-cards, which allows
92 for 32 bit PC-cards (the original PCMCIA standard specifies only
93 a 16 bit wide bus). Many newer PC-cards are actually CardBus cards.
94
95 To use 32 bit PC-cards, you also need a CardBus compatible host
96 bridge. Virtually all modern PCMCIA bridges do this, and most of
97 them are "yenta-compatible", so say Y or M there, too.
98
99 If unsure, say Y.
100
101comment "PC-card bridges"
102
103config YENTA
104 tristate "CardBus yenta-compatible bridge support"
Dominik Brodowski89b39f52005-07-07 17:59:09 -0700105 depends on PCI
106 select CARDBUS if !EMBEDDED
Linus Torvalds1da177e2005-04-16 15:20:36 -0700107 select PCCARD_NONSTATIC
108 ---help---
109 This option enables support for CardBus host bridges. Virtually
110 all modern PCMCIA bridges are CardBus compatible. A "bridge" is
111 the hardware inside your computer that PCMCIA cards are plugged
112 into.
113
114 To compile this driver as modules, choose M here: the
115 module will be called yenta_socket.
116
117 If unsure, say Y.
118
Daniel Ritz63e7ebd2005-11-03 21:12:14 +0100119config YENTA_O2
120 default y
121 bool "Special initialization for O2Micro bridges" if EMBEDDED
122 depends on YENTA
123
124config YENTA_RICOH
125 default y
126 bool "Special initialization for Ricoh bridges" if EMBEDDED
127 depends on YENTA
128
129config YENTA_TI
130 default y
131 bool "Special initialization for TI and EnE bridges" if EMBEDDED
132 depends on YENTA
133
134config YENTA_ENE_TUNE
135 default y
136 bool "Auto-tune EnE bridges for CB cards" if EMBEDDED
137 depends on YENTA_TI && CARDBUS
138
139config YENTA_TOSHIBA
140 default y
141 bool "Special initialization for Toshiba ToPIC bridges" if EMBEDDED
142 depends on YENTA
143
Linus Torvalds1da177e2005-04-16 15:20:36 -0700144config PD6729
145 tristate "Cirrus PD6729 compatible bridge support"
146 depends on PCMCIA && PCI
147 select PCCARD_NONSTATIC
148 help
149 This provides support for the Cirrus PD6729 PCI-to-PCMCIA bridge
150 device, found in some older laptops and PCMCIA card readers.
151
152config I82092
153 tristate "i82092 compatible bridge support"
154 depends on PCMCIA && PCI
155 select PCCARD_NONSTATIC
156 help
157 This provides support for the Intel I82092AA PCI-to-PCMCIA bridge device,
158 found in some older laptops and more commonly in evaluation boards for the
159 chip.
160
161config I82365
162 tristate "i82365 compatible bridge support"
163 depends on PCMCIA && ISA
164 select PCCARD_NONSTATIC
165 help
166 Say Y here to include support for ISA-bus PCMCIA host bridges that
167 are register compatible with the Intel i82365. These are found on
168 older laptops and ISA-bus card readers for desktop systems. A
169 "bridge" is the hardware inside your computer that PCMCIA cards are
170 plugged into. If unsure, say N.
171
172config TCIC
173 tristate "Databook TCIC host bridge support"
Komuro81000802005-09-24 23:12:40 -0700174 depends on PCMCIA && ISA
Linus Torvalds1da177e2005-04-16 15:20:36 -0700175 select PCCARD_NONSTATIC
176 help
177 Say Y here to include support for the Databook TCIC family of PCMCIA
178 host bridges. These are only found on a handful of old systems.
179 "Bridge" is the name used for the hardware inside your computer that
180 PCMCIA cards are plugged into. If unsure, say N.
181
Marcelo Tosattide957c82005-10-28 17:46:13 -0700182config PCMCIA_M8XX
Vitaly Bordug80128ff2007-07-09 11:37:35 -0700183 tristate "MPC8xx PCMCIA support"
184 depends on PCMCIA && PPC && 8xx
185 select PCCARD_IODYN
186 select PCCARD_NONSTATIC
187 help
188 Say Y here to include support for PowerPC 8xx series PCMCIA
189 controller.
Marcelo Tosattide957c82005-10-28 17:46:13 -0700190
Vitaly Bordug80128ff2007-07-09 11:37:35 -0700191 This driver is also available as a module called m8xx_pcmcia.
Marcelo Tosattide957c82005-10-28 17:46:13 -0700192
Linus Torvalds1da177e2005-04-16 15:20:36 -0700193config HD64465_PCMCIA
194 tristate "HD64465 host bridge support"
195 depends on HD64465 && PCMCIA
196
197config PCMCIA_AU1X00
198 tristate "Au1x00 pcmcia support"
199 depends on SOC_AU1X00 && PCMCIA
200
201config PCMCIA_SA1100
202 tristate "SA1100 support"
203 depends on ARM && ARCH_SA1100 && PCMCIA
204 help
205 Say Y here to include support for SA11x0-based PCMCIA or CF
206 sockets, found on HP iPAQs, Yopy, and other StrongARM(R)/
207 Xscale(R) embedded machines.
208
209 This driver is also available as a module called sa1100_cs.
210
211config PCMCIA_SA1111
212 tristate "SA1111 support"
213 depends on ARM && ARCH_SA1100 && SA1111 && PCMCIA
214 help
215 Say Y here to include support for SA1111-based PCMCIA or CF
216 sockets, found on the Jornada 720, Graphicsmaster and other
217 StrongARM(R)/Xscale(R) embedded machines.
218
219 This driver is also available as a module called sa1111_cs.
220
221config PCMCIA_PXA2XX
222 tristate "PXA2xx support"
223 depends on ARM && ARCH_PXA && PCMCIA
224 help
225 Say Y here to include support for the PXA2xx PCMCIA controller
226
227config PCMCIA_PROBE
228 bool
Dominik Brodowski6423efa2005-12-11 20:47:44 +0100229 default y if ISA && !ARCH_SA1100 && !ARCH_CLPS711X && !PARISC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700230
231config M32R_PCC
232 bool "M32R PCMCIA I/F"
233 depends on M32R && CHIP_M32700 && PCMCIA
Hirokazu Takata934bb7f2005-06-21 17:16:14 -0700234 select PCCARD_NONSTATIC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700235 help
236 Say Y here to use the M32R PCMCIA controller.
237
238config M32R_CFC
239 bool "M32R CF I/F Controller"
Hirokazu Takata934bb7f2005-06-21 17:16:14 -0700240 depends on M32R && (PLAT_USRV || PLAT_M32700UT || PLAT_MAPPI2 || PLAT_MAPPI3 || PLAT_OPSPUT)
241 select PCCARD_NONSTATIC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700242 help
243 Say Y here to use the M32R CompactFlash controller.
244
245config M32R_CFC_NUM
246 int "M32R CF I/F number"
247 depends on M32R_CFC
Hirokazu Takata934bb7f2005-06-21 17:16:14 -0700248 default "1" if PLAT_USRV || PLAT_M32700UT || PLAT_MAPPI2 || PLAT_MAPPI3 || PLAT_OPSPUT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700249 help
250 Set the number of M32R CF slots.
251
252config PCMCIA_VRC4171
253 tristate "NEC VRC4171 Card Controllers support"
Yoichi Yuasadaaeb722006-04-06 15:08:29 +0900254 depends on CPU_VR41XX && ISA && PCMCIA
Linus Torvalds1da177e2005-04-16 15:20:36 -0700255
256config PCMCIA_VRC4173
257 tristate "NEC VRC4173 CARDU support"
258 depends on CPU_VR41XX && PCI && PCMCIA
259
David Brownellf74e48a2005-09-09 13:03:28 -0700260config OMAP_CF
261 tristate "OMAP CompactFlash Controller"
262 depends on PCMCIA && ARCH_OMAP16XX
263 help
264 Say Y here to support the CompactFlash controller on OMAP.
265 Note that this doesn't support "True IDE" mode.
266
Andrew Victor2c1f3b72006-02-21 12:56:52 +0200267config AT91_CF
268 tristate "AT91 CompactFlash Controller"
269 depends on PCMCIA && ARCH_AT91RM9200
270 help
271 Say Y here to support the CompactFlash controller on AT91 chips.
272 Or choose M to compile the driver as a module named "at91_cf".
273
Linus Torvalds1da177e2005-04-16 15:20:36 -0700274config PCCARD_NONSTATIC
275 tristate
276
Dominik Brodowski3b27e942005-12-07 12:32:20 +0100277config PCCARD_IODYN
278 bool
279
Linus Torvalds1da177e2005-04-16 15:20:36 -0700280endif # PCCARD
281
282endmenu