blob: 86f0c5d5c116f74d2117806e45ec4599d750837a [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * linux/drivers/scsi/scsi_proc.c
3 *
4 * The functions in this file provide an interface between
5 * the PROC file system and the SCSI device drivers
6 * It is mainly used for debugging, statistics and to pass
7 * information directly to the lowlevel driver.
8 *
9 * (c) 1995 Michael Neuffer neuffer@goofy.zdv.uni-mainz.de
10 * Version: 0.99.8 last change: 95/09/13
11 *
12 * generic command parser provided by:
13 * Andreas Heilwagen <crashcar@informatik.uni-koblenz.de>
14 *
15 * generic_proc_info() support of xxxx_info() by:
16 * Michael A. Griffith <grif@acm.org>
17 */
18
19#include <linux/module.h>
20#include <linux/init.h>
21#include <linux/string.h>
22#include <linux/mm.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070023#include <linux/proc_fs.h>
24#include <linux/errno.h>
25#include <linux/blkdev.h>
26#include <linux/seq_file.h>
Arjan van de Ven0b950672006-01-11 13:16:10 +010027#include <linux/mutex.h>
Tejun Heo5a0e3ad2010-03-24 17:04:11 +090028#include <linux/gfp.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070029#include <asm/uaccess.h>
30
31#include <scsi/scsi.h>
32#include <scsi/scsi_device.h>
33#include <scsi/scsi_host.h>
Christoph Hellwige02f3f52006-01-13 19:04:00 +010034#include <scsi/scsi_transport.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070035
36#include "scsi_priv.h"
37#include "scsi_logging.h"
38
39
40/* 4K page size, but our output routines, use some slack for overruns */
41#define PROC_BLOCK_SIZE (3*1024)
42
43static struct proc_dir_entry *proc_scsi;
44
45/* Protect sht->present and sht->proc_dir */
Arjan van de Ven0b950672006-01-11 13:16:10 +010046static DEFINE_MUTEX(global_host_template_mutex);
Linus Torvalds1da177e2005-04-16 15:20:36 -070047
Al Viro0ffddfb2013-03-30 23:58:05 -040048static ssize_t proc_scsi_host_write(struct file *file, const char __user *buf,
49 size_t count, loff_t *ppos)
50{
Al Virod9dda782013-03-31 18:16:14 -040051 struct Scsi_Host *shost = PDE_DATA(file_inode(file));
Al Viro0ffddfb2013-03-30 23:58:05 -040052 ssize_t ret = -ENOMEM;
53 char *page;
54
55 if (count > PROC_BLOCK_SIZE)
56 return -EOVERFLOW;
57
58 if (!shost->hostt->write_info)
59 return -EINVAL;
60
61 page = (char *)__get_free_page(GFP_KERNEL);
62 if (page) {
63 ret = -EFAULT;
64 if (copy_from_user(page, buf, count))
65 goto out;
66 ret = shost->hostt->write_info(shost, page, count);
67 }
68out:
69 free_page((unsigned long)page);
70 return ret;
71}
72
73static int proc_scsi_show(struct seq_file *m, void *v)
74{
75 struct Scsi_Host *shost = m->private;
76 return shost->hostt->show_info(m, shost);
77}
78
79static int proc_scsi_host_open(struct inode *inode, struct file *file)
80{
Al Virod9dda782013-03-31 18:16:14 -040081 return single_open_size(file, proc_scsi_show, PDE_DATA(inode),
Al Viro859d22f2013-03-31 13:50:52 -040082 4 * PAGE_SIZE);
Al Viro0ffddfb2013-03-30 23:58:05 -040083}
84
85static const struct file_operations proc_scsi_fops = {
86 .open = proc_scsi_host_open,
Jan Beulich801d9d22013-05-29 13:26:53 +010087 .release = single_release,
Al Viro0ffddfb2013-03-30 23:58:05 -040088 .read = seq_read,
89 .llseek = seq_lseek,
90 .write = proc_scsi_host_write
91};
92
Rob Landleyeb448202007-11-03 13:30:39 -050093/**
94 * scsi_proc_hostdir_add - Create directory in /proc for a scsi host
95 * @sht: owner of this directory
96 *
97 * Sets sht->proc_dir to the new directory.
98 */
99
Linus Torvalds1da177e2005-04-16 15:20:36 -0700100void scsi_proc_hostdir_add(struct scsi_host_template *sht)
101{
Al Viro70ef4572013-03-31 13:27:56 -0400102 if (!sht->show_info)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700103 return;
104
Arjan van de Ven0b950672006-01-11 13:16:10 +0100105 mutex_lock(&global_host_template_mutex);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700106 if (!sht->present++) {
107 sht->proc_dir = proc_mkdir(sht->proc_name, proc_scsi);
108 if (!sht->proc_dir)
109 printk(KERN_ERR "%s: proc_mkdir failed for %s\n",
Harvey Harrisoncadbd4a2008-07-03 23:47:27 -0700110 __func__, sht->proc_name);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700111 }
Arjan van de Ven0b950672006-01-11 13:16:10 +0100112 mutex_unlock(&global_host_template_mutex);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700113}
114
Rob Landleyeb448202007-11-03 13:30:39 -0500115/**
116 * scsi_proc_hostdir_rm - remove directory in /proc for a scsi host
117 * @sht: owner of directory
118 */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700119void scsi_proc_hostdir_rm(struct scsi_host_template *sht)
120{
Al Viro70ef4572013-03-31 13:27:56 -0400121 if (!sht->show_info)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700122 return;
123
Arjan van de Ven0b950672006-01-11 13:16:10 +0100124 mutex_lock(&global_host_template_mutex);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700125 if (!--sht->present && sht->proc_dir) {
126 remove_proc_entry(sht->proc_name, proc_scsi);
127 sht->proc_dir = NULL;
128 }
Arjan van de Ven0b950672006-01-11 13:16:10 +0100129 mutex_unlock(&global_host_template_mutex);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700130}
131
Rob Landleyeb448202007-11-03 13:30:39 -0500132
133/**
134 * scsi_proc_host_add - Add entry for this host to appropriate /proc dir
135 * @shost: host to add
136 */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700137void scsi_proc_host_add(struct Scsi_Host *shost)
138{
139 struct scsi_host_template *sht = shost->hostt;
140 struct proc_dir_entry *p;
141 char name[10];
142
143 if (!sht->proc_dir)
144 return;
145
146 sprintf(name,"%d", shost->host_no);
Al Viro70ef4572013-03-31 13:27:56 -0400147 p = proc_create_data(name, S_IRUGO | S_IWUSR,
148 sht->proc_dir, &proc_scsi_fops, shost);
149 if (!p)
150 printk(KERN_ERR "%s: Failed to register host %d in"
151 "%s\n", __func__, shost->host_no,
152 sht->proc_name);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700153}
154
Rob Landleyeb448202007-11-03 13:30:39 -0500155/**
156 * scsi_proc_host_rm - remove this host's entry from /proc
157 * @shost: which host
158 */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700159void scsi_proc_host_rm(struct Scsi_Host *shost)
160{
161 char name[10];
162
163 if (!shost->hostt->proc_dir)
164 return;
165
166 sprintf(name,"%d", shost->host_no);
167 remove_proc_entry(name, shost->hostt->proc_dir);
168}
Rob Landleyeb448202007-11-03 13:30:39 -0500169/**
170 * proc_print_scsidevice - return data about this host
171 * @dev: A scsi device
172 * @data: &struct seq_file to output to.
173 *
174 * Description: prints Host, Channel, Id, Lun, Vendor, Model, Rev, Type,
175 * and revision.
176 */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700177static int proc_print_scsidevice(struct device *dev, void *data)
178{
Hannes Reineckeb0ed4332008-03-18 14:32:28 +0100179 struct scsi_device *sdev;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700180 struct seq_file *s = data;
181 int i;
182
Hannes Reineckeb0ed4332008-03-18 14:32:28 +0100183 if (!scsi_is_sdev_device(dev))
184 goto out;
185
186 sdev = to_scsi_device(dev);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700187 seq_printf(s,
188 "Host: scsi%d Channel: %02d Id: %02d Lun: %02d\n Vendor: ",
189 sdev->host->host_no, sdev->channel, sdev->id, sdev->lun);
190 for (i = 0; i < 8; i++) {
191 if (sdev->vendor[i] >= 0x20)
192 seq_printf(s, "%c", sdev->vendor[i]);
193 else
194 seq_printf(s, " ");
195 }
196
197 seq_printf(s, " Model: ");
198 for (i = 0; i < 16; i++) {
199 if (sdev->model[i] >= 0x20)
200 seq_printf(s, "%c", sdev->model[i]);
201 else
202 seq_printf(s, " ");
203 }
204
205 seq_printf(s, " Rev: ");
206 for (i = 0; i < 4; i++) {
207 if (sdev->rev[i] >= 0x20)
208 seq_printf(s, "%c", sdev->rev[i]);
209 else
210 seq_printf(s, " ");
211 }
212
213 seq_printf(s, "\n");
214
Matthew Wilcox4ff36712006-07-04 12:15:20 -0600215 seq_printf(s, " Type: %s ", scsi_device_type(sdev->type));
Alan Stern74feb532007-01-08 11:07:41 -0500216 seq_printf(s, " ANSI SCSI revision: %02x",
217 sdev->scsi_level - (sdev->scsi_level > 1));
Linus Torvalds1da177e2005-04-16 15:20:36 -0700218 if (sdev->scsi_level == 2)
219 seq_printf(s, " CCS\n");
220 else
221 seq_printf(s, "\n");
222
Hannes Reineckeb0ed4332008-03-18 14:32:28 +0100223out:
Linus Torvalds1da177e2005-04-16 15:20:36 -0700224 return 0;
225}
226
Rob Landleyeb448202007-11-03 13:30:39 -0500227/**
228 * scsi_add_single_device - Respond to user request to probe for/add device
229 * @host: user-supplied decimal integer
230 * @channel: user-supplied decimal integer
231 * @id: user-supplied decimal integer
232 * @lun: user-supplied decimal integer
233 *
234 * Description: called by writing "scsi add-single-device" to /proc/scsi/scsi.
235 *
236 * does scsi_host_lookup() and either user_scan() if that transport
237 * type supports it, or else scsi_scan_host_selected()
238 *
239 * Note: this seems to be aimed exclusively at SCSI parallel busses.
240 */
241
Linus Torvalds1da177e2005-04-16 15:20:36 -0700242static int scsi_add_single_device(uint host, uint channel, uint id, uint lun)
243{
244 struct Scsi_Host *shost;
245 int error = -ENXIO;
246
247 shost = scsi_host_lookup(host);
James Smart315cb0a2008-08-07 20:49:30 -0400248 if (!shost)
249 return error;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700250
Christoph Hellwige02f3f52006-01-13 19:04:00 +0100251 if (shost->transportt->user_scan)
252 error = shost->transportt->user_scan(shost, channel, id, lun);
253 else
254 error = scsi_scan_host_selected(shost, channel, id, lun, 1);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700255 scsi_host_put(shost);
256 return error;
257}
258
Rob Landleyeb448202007-11-03 13:30:39 -0500259/**
260 * scsi_remove_single_device - Respond to user request to remove a device
261 * @host: user-supplied decimal integer
262 * @channel: user-supplied decimal integer
263 * @id: user-supplied decimal integer
264 * @lun: user-supplied decimal integer
265 *
266 * Description: called by writing "scsi remove-single-device" to
267 * /proc/scsi/scsi. Does a scsi_device_lookup() and scsi_remove_device()
268 */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700269static int scsi_remove_single_device(uint host, uint channel, uint id, uint lun)
270{
271 struct scsi_device *sdev;
272 struct Scsi_Host *shost;
273 int error = -ENXIO;
274
275 shost = scsi_host_lookup(host);
James Smart315cb0a2008-08-07 20:49:30 -0400276 if (!shost)
277 return error;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700278 sdev = scsi_device_lookup(shost, channel, id, lun);
279 if (sdev) {
280 scsi_remove_device(sdev);
281 scsi_device_put(sdev);
282 error = 0;
283 }
284
285 scsi_host_put(shost);
286 return error;
287}
288
Rob Landleyeb448202007-11-03 13:30:39 -0500289/**
290 * proc_scsi_write - handle writes to /proc/scsi/scsi
291 * @file: not used
292 * @buf: buffer to write
293 * @length: length of buf, at most PAGE_SIZE
294 * @ppos: not used
295 *
296 * Description: this provides a legacy mechanism to add or remove devices by
297 * Host, Channel, ID, and Lun. To use,
298 * "echo 'scsi add-single-device 0 1 2 3' > /proc/scsi/scsi" or
299 * "echo 'scsi remove-single-device 0 1 2 3' > /proc/scsi/scsi" with
300 * "0 1 2 3" replaced by the Host, Channel, Id, and Lun.
301 *
302 * Note: this seems to be aimed at parallel SCSI. Most modern busses (USB,
303 * SATA, Firewire, Fibre Channel, etc) dynamically assign these values to
304 * provide a unique identifier and nothing more.
305 */
306
307
Linus Torvalds1da177e2005-04-16 15:20:36 -0700308static ssize_t proc_scsi_write(struct file *file, const char __user *buf,
309 size_t length, loff_t *ppos)
310{
311 int host, channel, id, lun;
312 char *buffer, *p;
313 int err;
314
315 if (!buf || length > PAGE_SIZE)
316 return -EINVAL;
317
318 buffer = (char *)__get_free_page(GFP_KERNEL);
319 if (!buffer)
320 return -ENOMEM;
321
322 err = -EFAULT;
323 if (copy_from_user(buffer, buf, length))
324 goto out;
325
326 err = -EINVAL;
327 if (length < PAGE_SIZE)
328 buffer[length] = '\0';
329 else if (buffer[PAGE_SIZE-1])
330 goto out;
331
332 /*
333 * Usage: echo "scsi add-single-device 0 1 2 3" >/proc/scsi/scsi
334 * with "0 1 2 3" replaced by your "Host Channel Id Lun".
335 */
336 if (!strncmp("scsi add-single-device", buffer, 22)) {
337 p = buffer + 23;
338
339 host = simple_strtoul(p, &p, 0);
340 channel = simple_strtoul(p + 1, &p, 0);
341 id = simple_strtoul(p + 1, &p, 0);
342 lun = simple_strtoul(p + 1, &p, 0);
343
344 err = scsi_add_single_device(host, channel, id, lun);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700345
346 /*
347 * Usage: echo "scsi remove-single-device 0 1 2 3" >/proc/scsi/scsi
348 * with "0 1 2 3" replaced by your "Host Channel Id Lun".
349 */
350 } else if (!strncmp("scsi remove-single-device", buffer, 25)) {
351 p = buffer + 26;
352
353 host = simple_strtoul(p, &p, 0);
354 channel = simple_strtoul(p + 1, &p, 0);
355 id = simple_strtoul(p + 1, &p, 0);
356 lun = simple_strtoul(p + 1, &p, 0);
357
358 err = scsi_remove_single_device(host, channel, id, lun);
359 }
360
James Bottomley2ca48a12006-04-27 14:07:49 -0500361 /*
362 * convert success returns so that we return the
363 * number of bytes consumed.
364 */
365 if (!err)
366 err = length;
367
Linus Torvalds1da177e2005-04-16 15:20:36 -0700368 out:
369 free_page((unsigned long)buffer);
370 return err;
371}
372
Jeff Mahoneye37c4912011-04-27 16:22:20 -0400373static int always_match(struct device *dev, void *data)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700374{
Jeff Mahoneye37c4912011-04-27 16:22:20 -0400375 return 1;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700376}
377
Jeff Mahoneye37c4912011-04-27 16:22:20 -0400378static inline struct device *next_scsi_device(struct device *start)
379{
380 struct device *next = bus_find_device(&scsi_bus_type, start, NULL,
381 always_match);
382 put_device(start);
383 return next;
384}
385
386static void *scsi_seq_start(struct seq_file *sfile, loff_t *pos)
387{
388 struct device *dev = NULL;
389 loff_t n = *pos;
390
391 while ((dev = next_scsi_device(dev))) {
392 if (!n--)
393 break;
394 sfile->private++;
395 }
396 return dev;
397}
398
399static void *scsi_seq_next(struct seq_file *sfile, void *v, loff_t *pos)
400{
401 (*pos)++;
402 sfile->private++;
403 return next_scsi_device(v);
404}
405
406static void scsi_seq_stop(struct seq_file *sfile, void *v)
407{
408 put_device(v);
409}
410
411static int scsi_seq_show(struct seq_file *sfile, void *dev)
412{
413 if (!sfile->private)
414 seq_puts(sfile, "Attached devices:\n");
415
416 return proc_print_scsidevice(dev, sfile);
417}
418
419static const struct seq_operations scsi_seq_ops = {
420 .start = scsi_seq_start,
421 .next = scsi_seq_next,
422 .stop = scsi_seq_stop,
423 .show = scsi_seq_show
424};
425
Rob Landleyeb448202007-11-03 13:30:39 -0500426/**
427 * proc_scsi_open - glue function
428 * @inode: not used
429 * @file: passed to single_open()
430 *
431 * Associates proc_scsi_show with this file
432 */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700433static int proc_scsi_open(struct inode *inode, struct file *file)
434{
435 /*
Rob Landleyeb448202007-11-03 13:30:39 -0500436 * We don't really need this for the write case but it doesn't
Linus Torvalds1da177e2005-04-16 15:20:36 -0700437 * harm either.
438 */
Jeff Mahoneye37c4912011-04-27 16:22:20 -0400439 return seq_open(file, &scsi_seq_ops);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700440}
441
Arjan van de Ven00977a52007-02-12 00:55:34 -0800442static const struct file_operations proc_scsi_operations = {
Denis V. Luneva9739092008-04-29 01:02:17 -0700443 .owner = THIS_MODULE,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700444 .open = proc_scsi_open,
445 .read = seq_read,
446 .write = proc_scsi_write,
447 .llseek = seq_lseek,
Jeff Mahoneye37c4912011-04-27 16:22:20 -0400448 .release = seq_release,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700449};
450
Rob Landleyeb448202007-11-03 13:30:39 -0500451/**
452 * scsi_init_procfs - create scsi and scsi/scsi in procfs
453 */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700454int __init scsi_init_procfs(void)
455{
456 struct proc_dir_entry *pde;
457
458 proc_scsi = proc_mkdir("scsi", NULL);
459 if (!proc_scsi)
460 goto err1;
461
Denis V. Luneva9739092008-04-29 01:02:17 -0700462 pde = proc_create("scsi/scsi", 0, NULL, &proc_scsi_operations);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700463 if (!pde)
464 goto err2;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700465
466 return 0;
467
468err2:
469 remove_proc_entry("scsi", NULL);
470err1:
471 return -ENOMEM;
472}
473
Rob Landleyeb448202007-11-03 13:30:39 -0500474/**
475 * scsi_exit_procfs - Remove scsi/scsi and scsi from procfs
476 */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700477void scsi_exit_procfs(void)
478{
479 remove_proc_entry("scsi/scsi", NULL);
480 remove_proc_entry("scsi", NULL);
481}