blob: 1d67f027bea76a55d5a49aa844e8d89128654a85 [file] [log] [blame]
Ian Molton3abcd192007-11-19 13:16:56 +01001/*
2 * Hardware definitions for the Toshiba eseries PDAs
3 *
4 * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
5 *
6 * This file is licensed under
7 * the terms of the GNU General Public License version 2. This program
8 * is licensed "as is" without any warranty of any kind, whether express
9 * or implied.
10 *
11 */
12
Ian Molton28365482008-08-09 21:48:45 +010013#include <linux/kernel.h>
Ian Molton3abcd192007-11-19 13:16:56 +010014#include <linux/init.h>
Ian Molton36033422008-08-24 19:21:26 +010015#include <linux/gpio.h>
Ian Moltonb1ae1b72008-09-26 13:38:59 +010016#include <linux/delay.h>
Ian Molton36033422008-08-24 19:21:26 +010017#include <linux/platform_device.h>
Eric Miaoe478fe42010-06-20 20:35:32 +080018#include <linux/mfd/tc6387xb.h>
19#include <linux/mfd/tc6393xb.h>
20#include <linux/mfd/t7l66xb.h>
21#include <linux/mtd/nand.h>
22#include <linux/mtd/partitions.h>
23
24#include <video/w100fb.h>
Ian Molton3abcd192007-11-19 13:16:56 +010025
26#include <asm/setup.h>
27#include <asm/mach/arch.h>
Ian Molton3abcd192007-11-19 13:16:56 +010028#include <asm/mach-types.h>
29
Eric Miao51c62982009-01-02 23:17:22 +080030#include <mach/pxa25x.h>
Ian Moltonebcce7b2008-08-19 13:34:56 +010031#include <mach/eseries-gpio.h>
Eric Miaoe478fe42010-06-20 20:35:32 +080032#include <mach/audio.h>
33#include <mach/pxafb.h>
Ian Moltonebcce7b2008-08-19 13:34:56 +010034#include <mach/udc.h>
Ian Molton36033422008-08-24 19:21:26 +010035#include <mach/irda.h>
Ian Molton28365482008-08-09 21:48:45 +010036
Eric Miaoe478fe42010-06-20 20:35:32 +080037#include "devices.h"
Ian Molton877e03d2008-06-25 22:22:49 +010038#include "generic.h"
Ian Moltonb1ae1b72008-09-26 13:38:59 +010039#include "clock.h"
Ian Molton3abcd192007-11-19 13:16:56 +010040
41/* Only e800 has 128MB RAM */
Ian Molton7dc96412008-08-19 12:14:21 +010042void __init eseries_fixup(struct machine_desc *desc,
Ian Molton67a6e802008-07-26 00:51:12 +010043 struct tag *tags, char **cmdline, struct meminfo *mi)
Ian Molton3abcd192007-11-19 13:16:56 +010044{
45 mi->nr_banks=1;
46 mi->bank[0].start = 0xa0000000;
47 mi->bank[0].node = 0;
48 if (machine_is_e800())
49 mi->bank[0].size = (128*1024*1024);
50 else
51 mi->bank[0].size = (64*1024*1024);
52}
53
Ian Moltonebcce7b2008-08-19 13:34:56 +010054struct pxa2xx_udc_mach_info e7xx_udc_mach_info = {
55 .gpio_vbus = GPIO_E7XX_USB_DISC,
56 .gpio_pullup = GPIO_E7XX_USB_PULLUP,
57 .gpio_pullup_inverted = 1
58};
59
Ian Molton36033422008-08-24 19:21:26 +010060struct pxaficp_platform_data e7xx_ficp_platform_data = {
Marek Vasutc4bd0172009-07-17 12:50:43 +020061 .gpio_pwdown = GPIO_E7XX_IR_OFF,
62 .transceiver_cap = IR_SIRMODE | IR_OFF,
Ian Molton36033422008-08-24 19:21:26 +010063};
64
Ian Moltonb1ae1b72008-09-26 13:38:59 +010065int eseries_tmio_enable(struct platform_device *dev)
66{
67 /* Reset - bring SUSPEND high before PCLR */
68 gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 0);
69 gpio_set_value(GPIO_ESERIES_TMIO_PCLR, 0);
70 msleep(1);
71 gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 1);
72 msleep(1);
73 gpio_set_value(GPIO_ESERIES_TMIO_PCLR, 1);
74 msleep(1);
75 return 0;
76}
77
78int eseries_tmio_disable(struct platform_device *dev)
79{
80 gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 0);
81 gpio_set_value(GPIO_ESERIES_TMIO_PCLR, 0);
82 return 0;
83}
84
85int eseries_tmio_suspend(struct platform_device *dev)
86{
87 gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 0);
88 return 0;
89}
90
91int eseries_tmio_resume(struct platform_device *dev)
92{
93 gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 1);
94 msleep(1);
95 return 0;
96}
97
98void eseries_get_tmio_gpios(void)
99{
100 gpio_request(GPIO_ESERIES_TMIO_SUSPEND, NULL);
101 gpio_request(GPIO_ESERIES_TMIO_PCLR, NULL);
102 gpio_direction_output(GPIO_ESERIES_TMIO_SUSPEND, 0);
103 gpio_direction_output(GPIO_ESERIES_TMIO_PCLR, 0);
104}
105
106/* TMIO controller uses the same resources on all e-series machines. */
107struct resource eseries_tmio_resources[] = {
108 [0] = {
109 .start = PXA_CS4_PHYS,
110 .end = PXA_CS4_PHYS + 0x1fffff,
111 .flags = IORESOURCE_MEM,
112 },
113 [1] = {
114 .start = IRQ_GPIO(GPIO_ESERIES_TMIO_IRQ),
115 .end = IRQ_GPIO(GPIO_ESERIES_TMIO_IRQ),
116 .flags = IORESOURCE_IRQ,
117 },
118};
119
120/* Some e-series hardware cannot control the 32K clock */
121static void clk_32k_dummy(struct clk *clk)
122{
123}
124
125static const struct clkops clk_32k_dummy_ops = {
126 .enable = clk_32k_dummy,
127 .disable = clk_32k_dummy,
128};
129
130static struct clk tmio_dummy_clk = {
131 .ops = &clk_32k_dummy_ops,
132 .rate = 32768,
133};
134
135static struct clk_lookup eseries_clkregs[] = {
136 INIT_CLKREG(&tmio_dummy_clk, NULL, "CLK_CK32K"),
137};
138
139void eseries_register_clks(void)
140{
Russell King0a0300d2010-01-12 12:28:00 +0000141 clkdev_add_table(eseries_clkregs, ARRAY_SIZE(eseries_clkregs));
Ian Moltonb1ae1b72008-09-26 13:38:59 +0100142}
143
Eric Miaoe478fe42010-06-20 20:35:32 +0800144#ifdef CONFIG_MACH_E330
145/* -------------------- e330 tc6387xb parameters -------------------- */
146
147static struct tc6387xb_platform_data e330_tc6387xb_info = {
148 .enable = &eseries_tmio_enable,
149 .disable = &eseries_tmio_disable,
150 .suspend = &eseries_tmio_suspend,
151 .resume = &eseries_tmio_resume,
152};
153
154static struct platform_device e330_tc6387xb_device = {
155 .name = "tc6387xb",
156 .id = -1,
157 .dev = {
158 .platform_data = &e330_tc6387xb_info,
159 },
160 .num_resources = 2,
161 .resource = eseries_tmio_resources,
162};
163
164/* --------------------------------------------------------------- */
165
166static struct platform_device *e330_devices[] __initdata = {
167 &e330_tc6387xb_device,
168};
169
170static void __init e330_init(void)
171{
172 pxa_set_ffuart_info(NULL);
173 pxa_set_btuart_info(NULL);
174 pxa_set_stuart_info(NULL);
175 eseries_register_clks();
176 eseries_get_tmio_gpios();
177 platform_add_devices(ARRAY_AND_SIZE(e330_devices));
178 pxa_set_udc_info(&e7xx_udc_mach_info);
179}
180
181MACHINE_START(E330, "Toshiba e330")
182 /* Maintainer: Ian Molton (spyro@f2s.com) */
183 .phys_io = 0x40000000,
184 .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
185 .boot_params = 0xa0000100,
186 .map_io = pxa_map_io,
187 .init_irq = pxa25x_init_irq,
188 .fixup = eseries_fixup,
189 .init_machine = e330_init,
190 .timer = &pxa_timer,
191MACHINE_END
192#endif
193
194#ifdef CONFIG_MACH_E350
195/* -------------------- e350 t7l66xb parameters -------------------- */
196
197static struct t7l66xb_platform_data e350_t7l66xb_info = {
198 .irq_base = IRQ_BOARD_START,
199 .enable = &eseries_tmio_enable,
200 .suspend = &eseries_tmio_suspend,
201 .resume = &eseries_tmio_resume,
202};
203
204static struct platform_device e350_t7l66xb_device = {
205 .name = "t7l66xb",
206 .id = -1,
207 .dev = {
208 .platform_data = &e350_t7l66xb_info,
209 },
210 .num_resources = 2,
211 .resource = eseries_tmio_resources,
212};
213
214/* ---------------------------------------------------------- */
215
216static struct platform_device *e350_devices[] __initdata = {
217 &e350_t7l66xb_device,
218};
219
220static void __init e350_init(void)
221{
222 pxa_set_ffuart_info(NULL);
223 pxa_set_btuart_info(NULL);
224 pxa_set_stuart_info(NULL);
225 eseries_register_clks();
226 eseries_get_tmio_gpios();
227 platform_add_devices(ARRAY_AND_SIZE(e350_devices));
228 pxa_set_udc_info(&e7xx_udc_mach_info);
229}
230
231MACHINE_START(E350, "Toshiba e350")
232 /* Maintainer: Ian Molton (spyro@f2s.com) */
233 .phys_io = 0x40000000,
234 .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
235 .boot_params = 0xa0000100,
236 .map_io = pxa_map_io,
237 .init_irq = pxa25x_init_irq,
238 .fixup = eseries_fixup,
239 .init_machine = e350_init,
240 .timer = &pxa_timer,
241MACHINE_END
242#endif
243
244#ifdef CONFIG_MACH_E400
245/* ------------------------ E400 LCD definitions ------------------------ */
246
247static struct pxafb_mode_info e400_pxafb_mode_info = {
248 .pixclock = 140703,
249 .xres = 240,
250 .yres = 320,
251 .bpp = 16,
252 .hsync_len = 4,
253 .left_margin = 28,
254 .right_margin = 8,
255 .vsync_len = 3,
256 .upper_margin = 5,
257 .lower_margin = 6,
258 .sync = 0,
259};
260
261static struct pxafb_mach_info e400_pxafb_mach_info = {
262 .modes = &e400_pxafb_mode_info,
263 .num_modes = 1,
264 .lcd_conn = LCD_COLOR_TFT_16BPP,
265 .lccr3 = 0,
266 .pxafb_backlight_power = NULL,
267};
268
269/* ------------------------ E400 MFP config ----------------------------- */
270
271static unsigned long e400_pin_config[] __initdata = {
272 /* Chip selects */
273 GPIO15_nCS_1, /* CS1 - Flash */
274 GPIO80_nCS_4, /* CS4 - TMIO */
275
276 /* Clocks */
277 GPIO12_32KHz,
278
279 /* BTUART */
280 GPIO42_BTUART_RXD,
281 GPIO43_BTUART_TXD,
282 GPIO44_BTUART_CTS,
283
284 /* TMIO controller */
285 GPIO19_GPIO, /* t7l66xb #PCLR */
286 GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
287
288 /* wakeup */
289 GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
290};
291
292/* ---------------------------------------------------------------------- */
293
294static struct mtd_partition partition_a = {
295 .name = "Internal NAND flash",
296 .offset = 0,
297 .size = MTDPART_SIZ_FULL,
298};
299
300static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
301
302static struct nand_bbt_descr e400_t7l66xb_nand_bbt = {
303 .options = 0,
304 .offs = 4,
305 .len = 2,
306 .pattern = scan_ff_pattern
307};
308
309static struct tmio_nand_data e400_t7l66xb_nand_config = {
310 .num_partitions = 1,
311 .partition = &partition_a,
312 .badblock_pattern = &e400_t7l66xb_nand_bbt,
313};
314
315static struct t7l66xb_platform_data e400_t7l66xb_info = {
316 .irq_base = IRQ_BOARD_START,
317 .enable = &eseries_tmio_enable,
318 .suspend = &eseries_tmio_suspend,
319 .resume = &eseries_tmio_resume,
320
321 .nand_data = &e400_t7l66xb_nand_config,
322};
323
324static struct platform_device e400_t7l66xb_device = {
325 .name = "t7l66xb",
326 .id = -1,
327 .dev = {
328 .platform_data = &e400_t7l66xb_info,
329 },
330 .num_resources = 2,
331 .resource = eseries_tmio_resources,
332};
333
334/* ---------------------------------------------------------- */
335
336static struct platform_device *e400_devices[] __initdata = {
337 &e400_t7l66xb_device,
338};
339
340static void __init e400_init(void)
341{
342 pxa2xx_mfp_config(ARRAY_AND_SIZE(e400_pin_config));
343 pxa_set_ffuart_info(NULL);
344 pxa_set_btuart_info(NULL);
345 pxa_set_stuart_info(NULL);
346 /* Fixme - e400 may have a switched clock */
347 eseries_register_clks();
348 eseries_get_tmio_gpios();
349 set_pxa_fb_info(&e400_pxafb_mach_info);
350 platform_add_devices(ARRAY_AND_SIZE(e400_devices));
351 pxa_set_udc_info(&e7xx_udc_mach_info);
352}
353
354MACHINE_START(E400, "Toshiba e400")
355 /* Maintainer: Ian Molton (spyro@f2s.com) */
356 .phys_io = 0x40000000,
357 .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
358 .boot_params = 0xa0000100,
359 .map_io = pxa_map_io,
360 .init_irq = pxa25x_init_irq,
361 .fixup = eseries_fixup,
362 .init_machine = e400_init,
363 .timer = &pxa_timer,
364MACHINE_END
365#endif
366
367#ifdef CONFIG_MACH_E740
368/* ------------------------ e740 video support --------------------------- */
369
370static struct w100_gen_regs e740_lcd_regs = {
371 .lcd_format = 0x00008023,
372 .lcdd_cntl1 = 0x0f000000,
373 .lcdd_cntl2 = 0x0003ffff,
374 .genlcd_cntl1 = 0x00ffff03,
375 .genlcd_cntl2 = 0x003c0f03,
376 .genlcd_cntl3 = 0x000143aa,
377};
378
379static struct w100_mode e740_lcd_mode = {
380 .xres = 240,
381 .yres = 320,
382 .left_margin = 20,
383 .right_margin = 28,
384 .upper_margin = 9,
385 .lower_margin = 8,
386 .crtc_ss = 0x80140013,
387 .crtc_ls = 0x81150110,
388 .crtc_gs = 0x80050005,
389 .crtc_vpos_gs = 0x000a0009,
390 .crtc_rev = 0x0040010a,
391 .crtc_dclk = 0xa906000a,
392 .crtc_gclk = 0x80050108,
393 .crtc_goe = 0x80050108,
394 .pll_freq = 57,
395 .pixclk_divider = 4,
396 .pixclk_divider_rotated = 4,
397 .pixclk_src = CLK_SRC_XTAL,
398 .sysclk_divider = 1,
399 .sysclk_src = CLK_SRC_PLL,
400 .crtc_ps1_active = 0x41060010,
401};
402
403static struct w100_gpio_regs e740_w100_gpio_info = {
404 .init_data1 = 0x21002103,
405 .gpio_dir1 = 0xffffdeff,
406 .gpio_oe1 = 0x03c00643,
407 .init_data2 = 0x003f003f,
408 .gpio_dir2 = 0xffffffff,
409 .gpio_oe2 = 0x000000ff,
410};
411
412static struct w100fb_mach_info e740_fb_info = {
413 .modelist = &e740_lcd_mode,
414 .num_modes = 1,
415 .regs = &e740_lcd_regs,
416 .gpio = &e740_w100_gpio_info,
417 .xtal_freq = 14318000,
418 .xtal_dbl = 1,
419};
420
421static struct resource e740_fb_resources[] = {
422 [0] = {
423 .start = 0x0c000000,
424 .end = 0x0cffffff,
425 .flags = IORESOURCE_MEM,
426 },
427};
428
429static struct platform_device e740_fb_device = {
430 .name = "w100fb",
431 .id = -1,
432 .dev = {
433 .platform_data = &e740_fb_info,
434 },
435 .num_resources = ARRAY_SIZE(e740_fb_resources),
436 .resource = e740_fb_resources,
437};
438
439/* --------------------------- MFP Pin config -------------------------- */
440
441static unsigned long e740_pin_config[] __initdata = {
442 /* Chip selects */
443 GPIO15_nCS_1, /* CS1 - Flash */
444 GPIO79_nCS_3, /* CS3 - IMAGEON */
445 GPIO80_nCS_4, /* CS4 - TMIO */
446
447 /* Clocks */
448 GPIO12_32KHz,
449
450 /* BTUART */
451 GPIO42_BTUART_RXD,
452 GPIO43_BTUART_TXD,
453 GPIO44_BTUART_CTS,
454
455 /* TMIO controller */
456 GPIO19_GPIO, /* t7l66xb #PCLR */
457 GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
458
459 /* UDC */
460 GPIO13_GPIO,
461 GPIO3_GPIO,
462
463 /* IrDA */
464 GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
465
466 /* AC97 */
467 GPIO28_AC97_BITCLK,
468 GPIO29_AC97_SDATA_IN_0,
469 GPIO30_AC97_SDATA_OUT,
470 GPIO31_AC97_SYNC,
471
472 /* Audio power control */
473 GPIO16_GPIO, /* AC97 codec AVDD2 supply (analogue power) */
474 GPIO40_GPIO, /* Mic amp power */
475 GPIO41_GPIO, /* Headphone amp power */
476
477 /* PC Card */
478 GPIO8_GPIO, /* CD0 */
479 GPIO44_GPIO, /* CD1 */
480 GPIO11_GPIO, /* IRQ0 */
481 GPIO6_GPIO, /* IRQ1 */
482 GPIO27_GPIO, /* RST0 */
483 GPIO24_GPIO, /* RST1 */
484 GPIO20_GPIO, /* PWR0 */
485 GPIO23_GPIO, /* PWR1 */
486 GPIO48_nPOE,
487 GPIO49_nPWE,
488 GPIO50_nPIOR,
489 GPIO51_nPIOW,
490 GPIO52_nPCE_1,
491 GPIO53_nPCE_2,
492 GPIO54_nPSKTSEL,
493 GPIO55_nPREG,
494 GPIO56_nPWAIT,
495 GPIO57_nIOIS16,
496
497 /* wakeup */
498 GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
499};
500
501/* -------------------- e740 t7l66xb parameters -------------------- */
502
503static struct t7l66xb_platform_data e740_t7l66xb_info = {
504 .irq_base = IRQ_BOARD_START,
505 .enable = &eseries_tmio_enable,
506 .suspend = &eseries_tmio_suspend,
507 .resume = &eseries_tmio_resume,
508};
509
510static struct platform_device e740_t7l66xb_device = {
511 .name = "t7l66xb",
512 .id = -1,
513 .dev = {
514 .platform_data = &e740_t7l66xb_info,
515 },
516 .num_resources = 2,
517 .resource = eseries_tmio_resources,
518};
519
520/* ----------------------------------------------------------------------- */
521
522static struct platform_device *e740_devices[] __initdata = {
523 &e740_fb_device,
524 &e740_t7l66xb_device,
525};
526
527static void __init e740_init(void)
528{
529 pxa2xx_mfp_config(ARRAY_AND_SIZE(e740_pin_config));
530 pxa_set_ffuart_info(NULL);
531 pxa_set_btuart_info(NULL);
532 pxa_set_stuart_info(NULL);
533 eseries_register_clks();
534 clk_add_alias("CLK_CK48M", e740_t7l66xb_device.name,
535 "UDCCLK", &pxa25x_device_udc.dev),
536 eseries_get_tmio_gpios();
537 platform_add_devices(ARRAY_AND_SIZE(e740_devices));
538 pxa_set_udc_info(&e7xx_udc_mach_info);
539 pxa_set_ac97_info(NULL);
540 pxa_set_ficp_info(&e7xx_ficp_platform_data);
541}
542
543MACHINE_START(E740, "Toshiba e740")
544 /* Maintainer: Ian Molton (spyro@f2s.com) */
545 .phys_io = 0x40000000,
546 .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
547 .boot_params = 0xa0000100,
548 .map_io = pxa_map_io,
549 .init_irq = pxa25x_init_irq,
550 .fixup = eseries_fixup,
551 .init_machine = e740_init,
552 .timer = &pxa_timer,
553MACHINE_END
554#endif
555
556#ifdef CONFIG_MACH_E750
557/* ---------------------- E750 LCD definitions -------------------- */
558
559static struct w100_gen_regs e750_lcd_regs = {
560 .lcd_format = 0x00008003,
561 .lcdd_cntl1 = 0x00000000,
562 .lcdd_cntl2 = 0x0003ffff,
563 .genlcd_cntl1 = 0x00fff003,
564 .genlcd_cntl2 = 0x003c0f03,
565 .genlcd_cntl3 = 0x000143aa,
566};
567
568static struct w100_mode e750_lcd_mode = {
569 .xres = 240,
570 .yres = 320,
571 .left_margin = 21,
572 .right_margin = 22,
573 .upper_margin = 5,
574 .lower_margin = 4,
575 .crtc_ss = 0x80150014,
576 .crtc_ls = 0x8014000d,
577 .crtc_gs = 0xc1000005,
578 .crtc_vpos_gs = 0x00020147,
579 .crtc_rev = 0x0040010a,
580 .crtc_dclk = 0xa1700030,
581 .crtc_gclk = 0x80cc0015,
582 .crtc_goe = 0x80cc0015,
583 .crtc_ps1_active = 0x61060017,
584 .pll_freq = 57,
585 .pixclk_divider = 4,
586 .pixclk_divider_rotated = 4,
587 .pixclk_src = CLK_SRC_XTAL,
588 .sysclk_divider = 1,
589 .sysclk_src = CLK_SRC_PLL,
590};
591
592static struct w100_gpio_regs e750_w100_gpio_info = {
593 .init_data1 = 0x01192f1b,
594 .gpio_dir1 = 0xd5ffdeff,
595 .gpio_oe1 = 0x000020bf,
596 .init_data2 = 0x010f010f,
597 .gpio_dir2 = 0xffffffff,
598 .gpio_oe2 = 0x000001cf,
599};
600
601static struct w100fb_mach_info e750_fb_info = {
602 .modelist = &e750_lcd_mode,
603 .num_modes = 1,
604 .regs = &e750_lcd_regs,
605 .gpio = &e750_w100_gpio_info,
606 .xtal_freq = 14318000,
607 .xtal_dbl = 1,
608};
609
610static struct resource e750_fb_resources[] = {
611 [0] = {
612 .start = 0x0c000000,
613 .end = 0x0cffffff,
614 .flags = IORESOURCE_MEM,
615 },
616};
617
618static struct platform_device e750_fb_device = {
619 .name = "w100fb",
620 .id = -1,
621 .dev = {
622 .platform_data = &e750_fb_info,
623 },
624 .num_resources = ARRAY_SIZE(e750_fb_resources),
625 .resource = e750_fb_resources,
626};
627
628/* -------------------- e750 MFP parameters -------------------- */
629
630static unsigned long e750_pin_config[] __initdata = {
631 /* Chip selects */
632 GPIO15_nCS_1, /* CS1 - Flash */
633 GPIO79_nCS_3, /* CS3 - IMAGEON */
634 GPIO80_nCS_4, /* CS4 - TMIO */
635
636 /* Clocks */
637 GPIO11_3_6MHz,
638
639 /* BTUART */
640 GPIO42_BTUART_RXD,
641 GPIO43_BTUART_TXD,
642 GPIO44_BTUART_CTS,
643
644 /* TMIO controller */
645 GPIO19_GPIO, /* t7l66xb #PCLR */
646 GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
647
648 /* UDC */
649 GPIO13_GPIO,
650 GPIO3_GPIO,
651
652 /* IrDA */
653 GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
654
655 /* AC97 */
656 GPIO28_AC97_BITCLK,
657 GPIO29_AC97_SDATA_IN_0,
658 GPIO30_AC97_SDATA_OUT,
659 GPIO31_AC97_SYNC,
660
661 /* Audio power control */
662 GPIO4_GPIO, /* Headphone amp power */
663 GPIO7_GPIO, /* Speaker amp power */
664 GPIO37_GPIO, /* Headphone detect */
665
666 /* PC Card */
667 GPIO8_GPIO, /* CD0 */
668 GPIO44_GPIO, /* CD1 */
669 GPIO11_GPIO, /* IRQ0 */
670 GPIO6_GPIO, /* IRQ1 */
671 GPIO27_GPIO, /* RST0 */
672 GPIO24_GPIO, /* RST1 */
673 GPIO20_GPIO, /* PWR0 */
674 GPIO23_GPIO, /* PWR1 */
675 GPIO48_nPOE,
676 GPIO49_nPWE,
677 GPIO50_nPIOR,
678 GPIO51_nPIOW,
679 GPIO52_nPCE_1,
680 GPIO53_nPCE_2,
681 GPIO54_nPSKTSEL,
682 GPIO55_nPREG,
683 GPIO56_nPWAIT,
684 GPIO57_nIOIS16,
685
686 /* wakeup */
687 GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
688};
689
690/* ----------------- e750 tc6393xb parameters ------------------ */
691
692static struct tc6393xb_platform_data e750_tc6393xb_info = {
693 .irq_base = IRQ_BOARD_START,
694 .scr_pll2cr = 0x0cc1,
695 .scr_gper = 0,
696 .gpio_base = -1,
697 .suspend = &eseries_tmio_suspend,
698 .resume = &eseries_tmio_resume,
699 .enable = &eseries_tmio_enable,
700 .disable = &eseries_tmio_disable,
701};
702
703static struct platform_device e750_tc6393xb_device = {
704 .name = "tc6393xb",
705 .id = -1,
706 .dev = {
707 .platform_data = &e750_tc6393xb_info,
708 },
709 .num_resources = 2,
710 .resource = eseries_tmio_resources,
711};
712
713/* ------------------------------------------------------------- */
714
715static struct platform_device *e750_devices[] __initdata = {
716 &e750_fb_device,
717 &e750_tc6393xb_device,
718};
719
720static void __init e750_init(void)
721{
722 pxa2xx_mfp_config(ARRAY_AND_SIZE(e750_pin_config));
723 pxa_set_ffuart_info(NULL);
724 pxa_set_btuart_info(NULL);
725 pxa_set_stuart_info(NULL);
726 clk_add_alias("CLK_CK3P6MI", e750_tc6393xb_device.name,
727 "GPIO11_CLK", NULL),
728 eseries_get_tmio_gpios();
729 platform_add_devices(ARRAY_AND_SIZE(e750_devices));
730 pxa_set_udc_info(&e7xx_udc_mach_info);
731 pxa_set_ac97_info(NULL);
732 pxa_set_ficp_info(&e7xx_ficp_platform_data);
733}
734
735MACHINE_START(E750, "Toshiba e750")
736 /* Maintainer: Ian Molton (spyro@f2s.com) */
737 .phys_io = 0x40000000,
738 .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
739 .boot_params = 0xa0000100,
740 .map_io = pxa_map_io,
741 .init_irq = pxa25x_init_irq,
742 .fixup = eseries_fixup,
743 .init_machine = e750_init,
744 .timer = &pxa_timer,
745MACHINE_END
746#endif
747
748#ifdef CONFIG_MACH_E800
749/* ------------------------ e800 LCD definitions ------------------------- */
750
751static unsigned long e800_pin_config[] __initdata = {
752 /* AC97 */
753 GPIO28_AC97_BITCLK,
754 GPIO29_AC97_SDATA_IN_0,
755 GPIO30_AC97_SDATA_OUT,
756 GPIO31_AC97_SYNC,
757};
758
759static struct w100_gen_regs e800_lcd_regs = {
760 .lcd_format = 0x00008003,
761 .lcdd_cntl1 = 0x02a00000,
762 .lcdd_cntl2 = 0x0003ffff,
763 .genlcd_cntl1 = 0x000ff2a3,
764 .genlcd_cntl2 = 0x000002a3,
765 .genlcd_cntl3 = 0x000102aa,
766};
767
768static struct w100_mode e800_lcd_mode[2] = {
769 [0] = {
770 .xres = 480,
771 .yres = 640,
772 .left_margin = 52,
773 .right_margin = 148,
774 .upper_margin = 2,
775 .lower_margin = 6,
776 .crtc_ss = 0x80350034,
777 .crtc_ls = 0x802b0026,
778 .crtc_gs = 0x80160016,
779 .crtc_vpos_gs = 0x00020003,
780 .crtc_rev = 0x0040001d,
781 .crtc_dclk = 0xe0000000,
782 .crtc_gclk = 0x82a50049,
783 .crtc_goe = 0x80ee001c,
784 .crtc_ps1_active = 0x00000000,
785 .pll_freq = 128,
786 .pixclk_divider = 4,
787 .pixclk_divider_rotated = 6,
788 .pixclk_src = CLK_SRC_PLL,
789 .sysclk_divider = 0,
790 .sysclk_src = CLK_SRC_PLL,
791 },
792 [1] = {
793 .xres = 240,
794 .yres = 320,
795 .left_margin = 15,
796 .right_margin = 88,
797 .upper_margin = 0,
798 .lower_margin = 7,
799 .crtc_ss = 0xd010000f,
800 .crtc_ls = 0x80070003,
801 .crtc_gs = 0x80000000,
802 .crtc_vpos_gs = 0x01460147,
803 .crtc_rev = 0x00400003,
804 .crtc_dclk = 0xa1700030,
805 .crtc_gclk = 0x814b0008,
806 .crtc_goe = 0x80cc0015,
807 .crtc_ps1_active = 0x00000000,
808 .pll_freq = 100,
809 .pixclk_divider = 6, /* Wince uses 14 which gives a */
810 .pixclk_divider_rotated = 6, /* 7MHz Pclk. We use a 14MHz one */
811 .pixclk_src = CLK_SRC_PLL,
812 .sysclk_divider = 0,
813 .sysclk_src = CLK_SRC_PLL,
814 }
815};
816
817
818static struct w100_gpio_regs e800_w100_gpio_info = {
819 .init_data1 = 0xc13fc019,
820 .gpio_dir1 = 0x3e40df7f,
821 .gpio_oe1 = 0x003c3000,
822 .init_data2 = 0x00000000,
823 .gpio_dir2 = 0x00000000,
824 .gpio_oe2 = 0x00000000,
825};
826
827static struct w100_mem_info e800_w100_mem_info = {
828 .ext_cntl = 0x09640011,
829 .sdram_mode_reg = 0x00600021,
830 .ext_timing_cntl = 0x10001545,
831 .io_cntl = 0x7ddd7333,
832 .size = 0x1fffff,
833};
834
835static void e800_tg_change(struct w100fb_par *par)
836{
837 unsigned long tmp;
838
839 tmp = w100fb_gpio_read(W100_GPIO_PORT_A);
840 if (par->mode->xres == 480)
841 tmp |= 0x100;
842 else
843 tmp &= ~0x100;
844 w100fb_gpio_write(W100_GPIO_PORT_A, tmp);
845}
846
847static struct w100_tg_info e800_tg_info = {
848 .change = e800_tg_change,
849};
850
851static struct w100fb_mach_info e800_fb_info = {
852 .modelist = e800_lcd_mode,
853 .num_modes = 2,
854 .regs = &e800_lcd_regs,
855 .gpio = &e800_w100_gpio_info,
856 .mem = &e800_w100_mem_info,
857 .tg = &e800_tg_info,
858 .xtal_freq = 16000000,
859};
860
861static struct resource e800_fb_resources[] = {
862 [0] = {
863 .start = 0x0c000000,
864 .end = 0x0cffffff,
865 .flags = IORESOURCE_MEM,
866 },
867};
868
869static struct platform_device e800_fb_device = {
870 .name = "w100fb",
871 .id = -1,
872 .dev = {
873 .platform_data = &e800_fb_info,
874 },
875 .num_resources = ARRAY_SIZE(e800_fb_resources),
876 .resource = e800_fb_resources,
877};
878
879/* --------------------------- UDC definitions --------------------------- */
880
881static struct pxa2xx_udc_mach_info e800_udc_mach_info = {
882 .gpio_vbus = GPIO_E800_USB_DISC,
883 .gpio_pullup = GPIO_E800_USB_PULLUP,
884 .gpio_pullup_inverted = 1
885};
886
887/* ----------------- e800 tc6393xb parameters ------------------ */
888
889static struct tc6393xb_platform_data e800_tc6393xb_info = {
890 .irq_base = IRQ_BOARD_START,
891 .scr_pll2cr = 0x0cc1,
892 .scr_gper = 0,
893 .gpio_base = -1,
894 .suspend = &eseries_tmio_suspend,
895 .resume = &eseries_tmio_resume,
896 .enable = &eseries_tmio_enable,
897 .disable = &eseries_tmio_disable,
898};
899
900static struct platform_device e800_tc6393xb_device = {
901 .name = "tc6393xb",
902 .id = -1,
903 .dev = {
904 .platform_data = &e800_tc6393xb_info,
905 },
906 .num_resources = 2,
907 .resource = eseries_tmio_resources,
908};
909
910/* ----------------------------------------------------------------------- */
911
912static struct platform_device *e800_devices[] __initdata = {
913 &e800_fb_device,
914 &e800_tc6393xb_device,
915};
916
917static void __init e800_init(void)
918{
919 pxa2xx_mfp_config(ARRAY_AND_SIZE(e800_pin_config));
920 pxa_set_ffuart_info(NULL);
921 pxa_set_btuart_info(NULL);
922 pxa_set_stuart_info(NULL);
923 clk_add_alias("CLK_CK3P6MI", e800_tc6393xb_device.name,
924 "GPIO11_CLK", NULL),
925 eseries_get_tmio_gpios();
926 platform_add_devices(ARRAY_AND_SIZE(e800_devices));
927 pxa_set_udc_info(&e800_udc_mach_info);
928 pxa_set_ac97_info(NULL);
929}
930
931MACHINE_START(E800, "Toshiba e800")
932 /* Maintainer: Ian Molton (spyro@f2s.com) */
933 .phys_io = 0x40000000,
934 .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
935 .boot_params = 0xa0000100,
936 .map_io = pxa_map_io,
937 .init_irq = pxa25x_init_irq,
938 .fixup = eseries_fixup,
939 .init_machine = e800_init,
940 .timer = &pxa_timer,
941MACHINE_END
942#endif