Guennadi Liakhovetski | f1e64f9 | 2012-11-22 11:12:08 +0100 | [diff] [blame] | 1 | /* |
| 2 | * AS3711 PMIC regulator driver, using DCDC Step Down and LDO supplies |
| 3 | * |
| 4 | * Copyright (C) 2012 Renesas Electronics Corporation |
| 5 | * Author: Guennadi Liakhovetski, <g.liakhovetski@gmx.de> |
| 6 | * |
| 7 | * This program is free software; you can redistribute it and/or modify |
| 8 | * it under the terms of the version 2 of the GNU General Public License as |
| 9 | * published by the Free Software Foundation |
| 10 | */ |
| 11 | |
| 12 | #include <linux/err.h> |
| 13 | #include <linux/init.h> |
| 14 | #include <linux/mfd/as3711.h> |
| 15 | #include <linux/module.h> |
| 16 | #include <linux/platform_device.h> |
| 17 | #include <linux/regmap.h> |
| 18 | #include <linux/regulator/driver.h> |
| 19 | #include <linux/slab.h> |
| 20 | |
| 21 | struct as3711_regulator_info { |
| 22 | struct regulator_desc desc; |
| 23 | unsigned int max_uV; |
| 24 | }; |
| 25 | |
| 26 | struct as3711_regulator { |
| 27 | struct as3711_regulator_info *reg_info; |
| 28 | struct regulator_dev *rdev; |
| 29 | }; |
| 30 | |
| 31 | static int as3711_list_voltage_sd(struct regulator_dev *rdev, |
| 32 | unsigned int selector) |
| 33 | { |
| 34 | if (selector >= rdev->desc->n_voltages) |
| 35 | return -EINVAL; |
| 36 | |
| 37 | if (!selector) |
| 38 | return 0; |
| 39 | if (selector < 0x41) |
| 40 | return 600000 + selector * 12500; |
| 41 | if (selector < 0x71) |
| 42 | return 1400000 + (selector - 0x40) * 25000; |
| 43 | return 2600000 + (selector - 0x70) * 50000; |
| 44 | } |
| 45 | |
| 46 | static int as3711_list_voltage_aldo(struct regulator_dev *rdev, |
| 47 | unsigned int selector) |
| 48 | { |
| 49 | if (selector >= rdev->desc->n_voltages) |
| 50 | return -EINVAL; |
| 51 | |
| 52 | if (selector < 0x10) |
| 53 | return 1200000 + selector * 50000; |
| 54 | return 1800000 + (selector - 0x10) * 100000; |
| 55 | } |
| 56 | |
| 57 | static int as3711_list_voltage_dldo(struct regulator_dev *rdev, |
| 58 | unsigned int selector) |
| 59 | { |
| 60 | if (selector >= rdev->desc->n_voltages || |
| 61 | (selector > 0x10 && selector < 0x20)) |
| 62 | return -EINVAL; |
| 63 | |
| 64 | if (selector < 0x11) |
| 65 | return 900000 + selector * 50000; |
| 66 | return 1750000 + (selector - 0x20) * 50000; |
| 67 | } |
| 68 | |
| 69 | static int as3711_bound_check(struct regulator_dev *rdev, |
| 70 | int *min_uV, int *max_uV) |
| 71 | { |
Axel Lin | 16ed9f0 | 2012-11-24 00:50:52 +0800 | [diff] [blame] | 72 | struct as3711_regulator *reg = rdev_get_drvdata(rdev); |
| 73 | struct as3711_regulator_info *info = reg->reg_info; |
Guennadi Liakhovetski | f1e64f9 | 2012-11-22 11:12:08 +0100 | [diff] [blame] | 74 | |
| 75 | dev_dbg(&rdev->dev, "%s(), %d, %d, %d\n", __func__, |
| 76 | *min_uV, rdev->desc->min_uV, info->max_uV); |
| 77 | |
| 78 | if (*max_uV < *min_uV || |
Axel Lin | 16ed9f0 | 2012-11-24 00:50:52 +0800 | [diff] [blame] | 79 | *min_uV > info->max_uV || rdev->desc->min_uV > *max_uV) |
Guennadi Liakhovetski | f1e64f9 | 2012-11-22 11:12:08 +0100 | [diff] [blame] | 80 | return -EINVAL; |
| 81 | |
| 82 | if (rdev->desc->n_voltages == 1) |
| 83 | return 0; |
| 84 | |
| 85 | if (*max_uV > info->max_uV) |
| 86 | *max_uV = info->max_uV; |
| 87 | |
| 88 | if (*min_uV < rdev->desc->min_uV) |
| 89 | *min_uV = rdev->desc->min_uV; |
| 90 | |
| 91 | return *min_uV; |
| 92 | } |
| 93 | |
| 94 | static int as3711_sel_check(int min, int max, int bottom, int step) |
| 95 | { |
Axel Lin | 7a4beda0 | 2012-11-24 00:53:22 +0800 | [diff] [blame] | 96 | int sel, voltage; |
Guennadi Liakhovetski | f1e64f9 | 2012-11-22 11:12:08 +0100 | [diff] [blame] | 97 | |
| 98 | /* Round up min, when dividing: keeps us within the range */ |
Axel Lin | 7a4beda0 | 2012-11-24 00:53:22 +0800 | [diff] [blame] | 99 | sel = DIV_ROUND_UP(min - bottom, step); |
| 100 | voltage = sel * step + bottom; |
Guennadi Liakhovetski | f1e64f9 | 2012-11-22 11:12:08 +0100 | [diff] [blame] | 101 | pr_debug("%s(): select %d..%d in %d+N*%d: %d\n", __func__, |
Axel Lin | 7a4beda0 | 2012-11-24 00:53:22 +0800 | [diff] [blame] | 102 | min, max, bottom, step, sel); |
| 103 | if (voltage > max) |
| 104 | return -EINVAL; |
| 105 | |
| 106 | return sel; |
Guennadi Liakhovetski | f1e64f9 | 2012-11-22 11:12:08 +0100 | [diff] [blame] | 107 | } |
| 108 | |
| 109 | static int as3711_map_voltage_sd(struct regulator_dev *rdev, |
| 110 | int min_uV, int max_uV) |
| 111 | { |
| 112 | int ret; |
| 113 | |
| 114 | ret = as3711_bound_check(rdev, &min_uV, &max_uV); |
| 115 | if (ret <= 0) |
| 116 | return ret; |
| 117 | |
| 118 | if (min_uV <= 1400000) |
| 119 | return as3711_sel_check(min_uV, max_uV, 600000, 12500); |
| 120 | |
| 121 | if (min_uV <= 2600000) |
| 122 | return as3711_sel_check(min_uV, max_uV, 1400000, 25000) + 0x40; |
| 123 | |
| 124 | return as3711_sel_check(min_uV, max_uV, 2600000, 50000) + 0x70; |
| 125 | } |
| 126 | |
| 127 | /* |
| 128 | * The regulator API supports 4 modes of operataion: FAST, NORMAL, IDLE and |
| 129 | * STANDBY. We map them in the following way to AS3711 SD1-4 DCDC modes: |
| 130 | * FAST: sdX_fast=1 |
| 131 | * NORMAL: low_noise=1 |
| 132 | * IDLE: low_noise=0 |
| 133 | */ |
| 134 | |
| 135 | static int as3711_set_mode_sd(struct regulator_dev *rdev, unsigned int mode) |
| 136 | { |
| 137 | unsigned int fast_bit = rdev->desc->enable_mask, |
| 138 | low_noise_bit = fast_bit << 4; |
| 139 | u8 val; |
| 140 | |
| 141 | switch (mode) { |
| 142 | case REGULATOR_MODE_FAST: |
| 143 | val = fast_bit | low_noise_bit; |
| 144 | break; |
| 145 | case REGULATOR_MODE_NORMAL: |
| 146 | val = low_noise_bit; |
| 147 | break; |
| 148 | case REGULATOR_MODE_IDLE: |
| 149 | val = 0; |
| 150 | break; |
| 151 | default: |
| 152 | return -EINVAL; |
| 153 | } |
| 154 | |
| 155 | return regmap_update_bits(rdev->regmap, AS3711_SD_CONTROL_1, |
| 156 | low_noise_bit | fast_bit, val); |
| 157 | } |
| 158 | |
| 159 | static unsigned int as3711_get_mode_sd(struct regulator_dev *rdev) |
| 160 | { |
| 161 | unsigned int fast_bit = rdev->desc->enable_mask, |
| 162 | low_noise_bit = fast_bit << 4, mask = fast_bit | low_noise_bit; |
| 163 | unsigned int val; |
| 164 | int ret = regmap_read(rdev->regmap, AS3711_SD_CONTROL_1, &val); |
| 165 | |
| 166 | if (ret < 0) |
| 167 | return ret; |
| 168 | |
| 169 | if ((val & mask) == mask) |
| 170 | return REGULATOR_MODE_FAST; |
| 171 | |
| 172 | if ((val & mask) == low_noise_bit) |
| 173 | return REGULATOR_MODE_NORMAL; |
| 174 | |
| 175 | if (!(val & mask)) |
| 176 | return REGULATOR_MODE_IDLE; |
| 177 | |
| 178 | return -EINVAL; |
| 179 | } |
| 180 | |
| 181 | static int as3711_map_voltage_aldo(struct regulator_dev *rdev, |
| 182 | int min_uV, int max_uV) |
| 183 | { |
| 184 | int ret; |
| 185 | |
| 186 | ret = as3711_bound_check(rdev, &min_uV, &max_uV); |
| 187 | if (ret <= 0) |
| 188 | return ret; |
| 189 | |
| 190 | if (min_uV <= 1800000) |
| 191 | return as3711_sel_check(min_uV, max_uV, 1200000, 50000); |
| 192 | |
| 193 | return as3711_sel_check(min_uV, max_uV, 1800000, 100000) + 0x10; |
| 194 | } |
| 195 | |
| 196 | static int as3711_map_voltage_dldo(struct regulator_dev *rdev, |
| 197 | int min_uV, int max_uV) |
| 198 | { |
| 199 | int ret; |
| 200 | |
| 201 | ret = as3711_bound_check(rdev, &min_uV, &max_uV); |
| 202 | if (ret <= 0) |
| 203 | return ret; |
| 204 | |
| 205 | if (min_uV <= 1700000) |
| 206 | return as3711_sel_check(min_uV, max_uV, 900000, 50000); |
| 207 | |
| 208 | return as3711_sel_check(min_uV, max_uV, 1750000, 50000) + 0x20; |
| 209 | } |
| 210 | |
| 211 | static struct regulator_ops as3711_sd_ops = { |
| 212 | .is_enabled = regulator_is_enabled_regmap, |
| 213 | .enable = regulator_enable_regmap, |
| 214 | .disable = regulator_disable_regmap, |
| 215 | .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| 216 | .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| 217 | .list_voltage = as3711_list_voltage_sd, |
| 218 | .map_voltage = as3711_map_voltage_sd, |
| 219 | .get_mode = as3711_get_mode_sd, |
| 220 | .set_mode = as3711_set_mode_sd, |
| 221 | }; |
| 222 | |
| 223 | static struct regulator_ops as3711_aldo_ops = { |
| 224 | .is_enabled = regulator_is_enabled_regmap, |
| 225 | .enable = regulator_enable_regmap, |
| 226 | .disable = regulator_disable_regmap, |
| 227 | .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| 228 | .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| 229 | .list_voltage = as3711_list_voltage_aldo, |
| 230 | .map_voltage = as3711_map_voltage_aldo, |
| 231 | }; |
| 232 | |
| 233 | static struct regulator_ops as3711_dldo_ops = { |
| 234 | .is_enabled = regulator_is_enabled_regmap, |
| 235 | .enable = regulator_enable_regmap, |
| 236 | .disable = regulator_disable_regmap, |
| 237 | .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| 238 | .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| 239 | .list_voltage = as3711_list_voltage_dldo, |
| 240 | .map_voltage = as3711_map_voltage_dldo, |
| 241 | }; |
| 242 | |
| 243 | #define AS3711_REG(_id, _en_reg, _en_bit, _vmask, _vshift, _min_uV, _max_uV, _sfx) \ |
| 244 | [AS3711_REGULATOR_ ## _id] = { \ |
| 245 | .desc = { \ |
| 246 | .name = "as3711-regulator-" # _id, \ |
| 247 | .id = AS3711_REGULATOR_ ## _id, \ |
| 248 | .n_voltages = (_vmask + 1), \ |
| 249 | .ops = &as3711_ ## _sfx ## _ops, \ |
| 250 | .type = REGULATOR_VOLTAGE, \ |
| 251 | .owner = THIS_MODULE, \ |
| 252 | .vsel_reg = AS3711_ ## _id ## _VOLTAGE, \ |
| 253 | .vsel_mask = _vmask << _vshift, \ |
| 254 | .enable_reg = AS3711_ ## _en_reg, \ |
| 255 | .enable_mask = BIT(_en_bit), \ |
| 256 | .min_uV = _min_uV, \ |
| 257 | }, \ |
| 258 | .max_uV = _max_uV, \ |
| 259 | } |
| 260 | |
| 261 | static struct as3711_regulator_info as3711_reg_info[] = { |
| 262 | AS3711_REG(SD_1, SD_CONTROL, 0, 0x7f, 0, 612500, 3350000, sd), |
| 263 | AS3711_REG(SD_2, SD_CONTROL, 1, 0x7f, 0, 612500, 3350000, sd), |
| 264 | AS3711_REG(SD_3, SD_CONTROL, 2, 0x7f, 0, 612500, 3350000, sd), |
| 265 | AS3711_REG(SD_4, SD_CONTROL, 3, 0x7f, 0, 612500, 3350000, sd), |
| 266 | AS3711_REG(LDO_1, LDO_1_VOLTAGE, 7, 0x1f, 0, 1200000, 3300000, aldo), |
| 267 | AS3711_REG(LDO_2, LDO_2_VOLTAGE, 7, 0x1f, 0, 1200000, 3300000, aldo), |
| 268 | AS3711_REG(LDO_3, LDO_3_VOLTAGE, 7, 0x3f, 0, 900000, 3300000, dldo), |
| 269 | AS3711_REG(LDO_4, LDO_4_VOLTAGE, 7, 0x3f, 0, 900000, 3300000, dldo), |
| 270 | AS3711_REG(LDO_5, LDO_5_VOLTAGE, 7, 0x3f, 0, 900000, 3300000, dldo), |
| 271 | AS3711_REG(LDO_6, LDO_6_VOLTAGE, 7, 0x3f, 0, 900000, 3300000, dldo), |
| 272 | AS3711_REG(LDO_7, LDO_7_VOLTAGE, 7, 0x3f, 0, 900000, 3300000, dldo), |
| 273 | AS3711_REG(LDO_8, LDO_8_VOLTAGE, 7, 0x3f, 0, 900000, 3300000, dldo), |
| 274 | /* StepUp output voltage depends on supplying regulator */ |
| 275 | }; |
| 276 | |
| 277 | #define AS3711_REGULATOR_NUM ARRAY_SIZE(as3711_reg_info) |
| 278 | |
| 279 | static int as3711_regulator_probe(struct platform_device *pdev) |
| 280 | { |
| 281 | struct as3711_regulator_pdata *pdata = dev_get_platdata(&pdev->dev); |
| 282 | struct as3711 *as3711 = dev_get_drvdata(pdev->dev.parent); |
| 283 | struct regulator_init_data *reg_data; |
| 284 | struct regulator_config config = {.dev = &pdev->dev,}; |
| 285 | struct as3711_regulator *reg = NULL; |
| 286 | struct as3711_regulator *regs; |
| 287 | struct regulator_dev *rdev; |
| 288 | struct as3711_regulator_info *ri; |
| 289 | int ret; |
| 290 | int id; |
| 291 | |
| 292 | if (!pdata) |
| 293 | dev_dbg(&pdev->dev, "No platform data...\n"); |
| 294 | |
| 295 | regs = devm_kzalloc(&pdev->dev, AS3711_REGULATOR_NUM * |
| 296 | sizeof(struct as3711_regulator), GFP_KERNEL); |
| 297 | if (!regs) { |
| 298 | dev_err(&pdev->dev, "Memory allocation failed exiting..\n"); |
| 299 | return -ENOMEM; |
| 300 | } |
| 301 | |
| 302 | for (id = 0, ri = as3711_reg_info; id < AS3711_REGULATOR_NUM; ++id, ri++) { |
| 303 | reg_data = pdata ? pdata->init_data[id] : NULL; |
| 304 | |
| 305 | /* No need to register if there is no regulator data */ |
| 306 | if (!ri->desc.name) |
| 307 | continue; |
| 308 | |
| 309 | reg = ®s[id]; |
| 310 | reg->reg_info = ri; |
| 311 | |
| 312 | config.init_data = reg_data; |
| 313 | config.driver_data = reg; |
| 314 | config.regmap = as3711->regmap; |
| 315 | |
| 316 | rdev = regulator_register(&ri->desc, &config); |
| 317 | if (IS_ERR(rdev)) { |
| 318 | dev_err(&pdev->dev, "Failed to register regulator %s\n", |
| 319 | ri->desc.name); |
| 320 | ret = PTR_ERR(rdev); |
| 321 | goto eregreg; |
| 322 | } |
| 323 | reg->rdev = rdev; |
| 324 | } |
| 325 | platform_set_drvdata(pdev, regs); |
| 326 | return 0; |
| 327 | |
| 328 | eregreg: |
| 329 | while (--id >= 0) |
| 330 | regulator_unregister(regs[id].rdev); |
| 331 | |
| 332 | return ret; |
| 333 | } |
| 334 | |
| 335 | static int as3711_regulator_remove(struct platform_device *pdev) |
| 336 | { |
| 337 | struct as3711_regulator *regs = platform_get_drvdata(pdev); |
| 338 | int id; |
| 339 | |
| 340 | for (id = 0; id < AS3711_REGULATOR_NUM; ++id) |
| 341 | regulator_unregister(regs[id].rdev); |
| 342 | return 0; |
| 343 | } |
| 344 | |
| 345 | static struct platform_driver as3711_regulator_driver = { |
| 346 | .driver = { |
| 347 | .name = "as3711-regulator", |
| 348 | .owner = THIS_MODULE, |
| 349 | }, |
| 350 | .probe = as3711_regulator_probe, |
| 351 | .remove = as3711_regulator_remove, |
| 352 | }; |
| 353 | |
| 354 | static int __init as3711_regulator_init(void) |
| 355 | { |
| 356 | return platform_driver_register(&as3711_regulator_driver); |
| 357 | } |
| 358 | subsys_initcall(as3711_regulator_init); |
| 359 | |
| 360 | static void __exit as3711_regulator_exit(void) |
| 361 | { |
| 362 | platform_driver_unregister(&as3711_regulator_driver); |
| 363 | } |
| 364 | module_exit(as3711_regulator_exit); |
| 365 | |
| 366 | MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>"); |
| 367 | MODULE_DESCRIPTION("AS3711 regulator driver"); |
| 368 | MODULE_ALIAS("platform:as3711-regulator"); |
| 369 | MODULE_LICENSE("GPL v2"); |