blob: 01d8971ad7db3cfe5830aff3adade86f10e7586a [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/* Driver for Datafab USB Compact Flash reader
2 *
3 * $Id: datafab.c,v 1.7 2002/02/25 00:40:13 mdharm Exp $
4 *
5 * datafab driver v0.1:
6 *
7 * First release
8 *
9 * Current development and maintenance by:
10 * (c) 2000 Jimmie Mayfield (mayfield+datafab@sackheads.org)
11 *
12 * Many thanks to Robert Baruch for the SanDisk SmartMedia reader driver
13 * which I used as a template for this driver.
14 *
15 * Some bugfixes and scatter-gather code by Gregory P. Smith
16 * (greg-usb@electricrain.com)
17 *
18 * Fix for media change by Joerg Schneider (js@joergschneider.com)
19 *
20 * Other contributors:
21 * (c) 2002 Alan Stern <stern@rowland.org>
22 *
23 * This program is free software; you can redistribute it and/or modify it
24 * under the terms of the GNU General Public License as published by the
25 * Free Software Foundation; either version 2, or (at your option) any
26 * later version.
27 *
28 * This program is distributed in the hope that it will be useful, but
29 * WITHOUT ANY WARRANTY; without even the implied warranty of
30 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
31 * General Public License for more details.
32 *
33 * You should have received a copy of the GNU General Public License along
34 * with this program; if not, write to the Free Software Foundation, Inc.,
35 * 675 Mass Ave, Cambridge, MA 02139, USA.
36 */
37
38/*
39 * This driver attempts to support USB CompactFlash reader/writer devices
40 * based on Datafab USB-to-ATA chips. It was specifically developed for the
41 * Datafab MDCFE-B USB CompactFlash reader but has since been found to work
42 * with a variety of Datafab-based devices from a number of manufacturers.
43 * I've received a report of this driver working with a Datafab-based
44 * SmartMedia device though please be aware that I'm personally unable to
45 * test SmartMedia support.
46 *
47 * This driver supports reading and writing. If you're truly paranoid,
48 * however, you can force the driver into a write-protected state by setting
49 * the WP enable bits in datafab_handle_mode_sense(). See the comments
50 * in that routine.
51 */
52
53#include <linux/sched.h>
54#include <linux/errno.h>
55#include <linux/slab.h>
56
57#include <scsi/scsi.h>
58#include <scsi/scsi_cmnd.h>
59
60#include "usb.h"
61#include "transport.h"
62#include "protocol.h"
63#include "debug.h"
64#include "datafab.h"
65
66static int datafab_determine_lun(struct us_data *us,
67 struct datafab_info *info);
68
69
70static inline int
71datafab_bulk_read(struct us_data *us, unsigned char *data, unsigned int len) {
72 if (len == 0)
73 return USB_STOR_XFER_GOOD;
74
75 US_DEBUGP("datafab_bulk_read: len = %d\n", len);
76 return usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
77 data, len, NULL);
78}
79
80
81static inline int
82datafab_bulk_write(struct us_data *us, unsigned char *data, unsigned int len) {
83 if (len == 0)
84 return USB_STOR_XFER_GOOD;
85
86 US_DEBUGP("datafab_bulk_write: len = %d\n", len);
87 return usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
88 data, len, NULL);
89}
90
91
92static int datafab_read_data(struct us_data *us,
93 struct datafab_info *info,
94 u32 sector,
95 u32 sectors)
96{
97 unsigned char *command = us->iobuf;
98 unsigned char *buffer;
99 unsigned char thistime;
100 unsigned int totallen, alloclen;
101 int len, result;
102 unsigned int sg_idx = 0, sg_offset = 0;
103
104 // we're working in LBA mode. according to the ATA spec,
105 // we can support up to 28-bit addressing. I don't know if Datafab
106 // supports beyond 24-bit addressing. It's kind of hard to test
107 // since it requires > 8GB CF card.
108 //
109 if (sectors > 0x0FFFFFFF)
110 return USB_STOR_TRANSPORT_ERROR;
111
112 if (info->lun == -1) {
113 result = datafab_determine_lun(us, info);
114 if (result != USB_STOR_TRANSPORT_GOOD)
115 return result;
116 }
117
118 totallen = sectors * info->ssize;
119
120 // Since we don't read more than 64 KB at a time, we have to create
121 // a bounce buffer and move the data a piece at a time between the
122 // bounce buffer and the actual transfer buffer.
123
124 alloclen = min(totallen, 65536u);
125 buffer = kmalloc(alloclen, GFP_NOIO);
126 if (buffer == NULL)
127 return USB_STOR_TRANSPORT_ERROR;
128
129 do {
130 // loop, never allocate or transfer more than 64k at once
131 // (min(128k, 255*info->ssize) is the real limit)
132
133 len = min(totallen, alloclen);
134 thistime = (len / info->ssize) & 0xff;
135
136 command[0] = 0;
137 command[1] = thistime;
138 command[2] = sector & 0xFF;
139 command[3] = (sector >> 8) & 0xFF;
140 command[4] = (sector >> 16) & 0xFF;
141
142 command[5] = 0xE0 + (info->lun << 4);
143 command[5] |= (sector >> 24) & 0x0F;
144 command[6] = 0x20;
145 command[7] = 0x01;
146
147 // send the read command
148 result = datafab_bulk_write(us, command, 8);
149 if (result != USB_STOR_XFER_GOOD)
150 goto leave;
151
152 // read the result
153 result = datafab_bulk_read(us, buffer, len);
154 if (result != USB_STOR_XFER_GOOD)
155 goto leave;
156
157 // Store the data in the transfer buffer
158 usb_stor_access_xfer_buf(buffer, len, us->srb,
159 &sg_idx, &sg_offset, TO_XFER_BUF);
160
161 sector += thistime;
162 totallen -= len;
163 } while (totallen > 0);
164
165 kfree(buffer);
166 return USB_STOR_TRANSPORT_GOOD;
167
168 leave:
169 kfree(buffer);
170 return USB_STOR_TRANSPORT_ERROR;
171}
172
173
174static int datafab_write_data(struct us_data *us,
175 struct datafab_info *info,
176 u32 sector,
177 u32 sectors)
178{
179 unsigned char *command = us->iobuf;
180 unsigned char *reply = us->iobuf;
181 unsigned char *buffer;
182 unsigned char thistime;
183 unsigned int totallen, alloclen;
184 int len, result;
185 unsigned int sg_idx = 0, sg_offset = 0;
186
187 // we're working in LBA mode. according to the ATA spec,
188 // we can support up to 28-bit addressing. I don't know if Datafab
189 // supports beyond 24-bit addressing. It's kind of hard to test
190 // since it requires > 8GB CF card.
191 //
192 if (sectors > 0x0FFFFFFF)
193 return USB_STOR_TRANSPORT_ERROR;
194
195 if (info->lun == -1) {
196 result = datafab_determine_lun(us, info);
197 if (result != USB_STOR_TRANSPORT_GOOD)
198 return result;
199 }
200
201 totallen = sectors * info->ssize;
202
203 // Since we don't write more than 64 KB at a time, we have to create
204 // a bounce buffer and move the data a piece at a time between the
205 // bounce buffer and the actual transfer buffer.
206
207 alloclen = min(totallen, 65536u);
208 buffer = kmalloc(alloclen, GFP_NOIO);
209 if (buffer == NULL)
210 return USB_STOR_TRANSPORT_ERROR;
211
212 do {
213 // loop, never allocate or transfer more than 64k at once
214 // (min(128k, 255*info->ssize) is the real limit)
215
216 len = min(totallen, alloclen);
217 thistime = (len / info->ssize) & 0xff;
218
219 // Get the data from the transfer buffer
220 usb_stor_access_xfer_buf(buffer, len, us->srb,
221 &sg_idx, &sg_offset, FROM_XFER_BUF);
222
223 command[0] = 0;
224 command[1] = thistime;
225 command[2] = sector & 0xFF;
226 command[3] = (sector >> 8) & 0xFF;
227 command[4] = (sector >> 16) & 0xFF;
228
229 command[5] = 0xE0 + (info->lun << 4);
230 command[5] |= (sector >> 24) & 0x0F;
231 command[6] = 0x30;
232 command[7] = 0x02;
233
234 // send the command
235 result = datafab_bulk_write(us, command, 8);
236 if (result != USB_STOR_XFER_GOOD)
237 goto leave;
238
239 // send the data
240 result = datafab_bulk_write(us, buffer, len);
241 if (result != USB_STOR_XFER_GOOD)
242 goto leave;
243
244 // read the result
245 result = datafab_bulk_read(us, reply, 2);
246 if (result != USB_STOR_XFER_GOOD)
247 goto leave;
248
249 if (reply[0] != 0x50 && reply[1] != 0) {
250 US_DEBUGP("datafab_write_data: Gah! "
251 "write return code: %02x %02x\n",
252 reply[0], reply[1]);
253 result = USB_STOR_TRANSPORT_ERROR;
254 goto leave;
255 }
256
257 sector += thistime;
258 totallen -= len;
259 } while (totallen > 0);
260
261 kfree(buffer);
262 return USB_STOR_TRANSPORT_GOOD;
263
264 leave:
265 kfree(buffer);
266 return USB_STOR_TRANSPORT_ERROR;
267}
268
269
270static int datafab_determine_lun(struct us_data *us,
271 struct datafab_info *info)
272{
273 // Dual-slot readers can be thought of as dual-LUN devices.
274 // We need to determine which card slot is being used.
275 // We'll send an IDENTIFY DEVICE command and see which LUN responds...
276 //
277 // There might be a better way of doing this?
278
279 static unsigned char scommand[8] = { 0, 1, 0, 0, 0, 0xa0, 0xec, 1 };
280 unsigned char *command = us->iobuf;
281 unsigned char *buf;
282 int count = 0, rc;
283
284 if (!us || !info)
285 return USB_STOR_TRANSPORT_ERROR;
286
287 memcpy(command, scommand, 8);
288 buf = kmalloc(512, GFP_NOIO);
289 if (!buf)
290 return USB_STOR_TRANSPORT_ERROR;
291
292 US_DEBUGP("datafab_determine_lun: locating...\n");
293
294 // we'll try 3 times before giving up...
295 //
296 while (count++ < 3) {
297 command[5] = 0xa0;
298
299 rc = datafab_bulk_write(us, command, 8);
300 if (rc != USB_STOR_XFER_GOOD) {
301 rc = USB_STOR_TRANSPORT_ERROR;
302 goto leave;
303 }
304
305 rc = datafab_bulk_read(us, buf, 512);
306 if (rc == USB_STOR_XFER_GOOD) {
307 info->lun = 0;
308 rc = USB_STOR_TRANSPORT_GOOD;
309 goto leave;
310 }
311
312 command[5] = 0xb0;
313
314 rc = datafab_bulk_write(us, command, 8);
315 if (rc != USB_STOR_XFER_GOOD) {
316 rc = USB_STOR_TRANSPORT_ERROR;
317 goto leave;
318 }
319
320 rc = datafab_bulk_read(us, buf, 512);
321 if (rc == USB_STOR_XFER_GOOD) {
322 info->lun = 1;
323 rc = USB_STOR_TRANSPORT_GOOD;
324 goto leave;
325 }
326
327 msleep(20);
328 }
329
330 rc = USB_STOR_TRANSPORT_ERROR;
331
332 leave:
333 kfree(buf);
334 return rc;
335}
336
337static int datafab_id_device(struct us_data *us,
338 struct datafab_info *info)
339{
340 // this is a variation of the ATA "IDENTIFY DEVICE" command...according
341 // to the ATA spec, 'Sector Count' isn't used but the Windows driver
342 // sets this bit so we do too...
343 //
344 static unsigned char scommand[8] = { 0, 1, 0, 0, 0, 0xa0, 0xec, 1 };
345 unsigned char *command = us->iobuf;
346 unsigned char *reply;
347 int rc;
348
349 if (!us || !info)
350 return USB_STOR_TRANSPORT_ERROR;
351
352 if (info->lun == -1) {
353 rc = datafab_determine_lun(us, info);
354 if (rc != USB_STOR_TRANSPORT_GOOD)
355 return rc;
356 }
357
358 memcpy(command, scommand, 8);
359 reply = kmalloc(512, GFP_NOIO);
360 if (!reply)
361 return USB_STOR_TRANSPORT_ERROR;
362
363 command[5] += (info->lun << 4);
364
365 rc = datafab_bulk_write(us, command, 8);
366 if (rc != USB_STOR_XFER_GOOD) {
367 rc = USB_STOR_TRANSPORT_ERROR;
368 goto leave;
369 }
370
371 // we'll go ahead and extract the media capacity while we're here...
372 //
373 rc = datafab_bulk_read(us, reply, 512);
374 if (rc == USB_STOR_XFER_GOOD) {
375 // capacity is at word offset 57-58
376 //
377 info->sectors = ((u32)(reply[117]) << 24) |
378 ((u32)(reply[116]) << 16) |
379 ((u32)(reply[115]) << 8) |
380 ((u32)(reply[114]) );
381 rc = USB_STOR_TRANSPORT_GOOD;
382 goto leave;
383 }
384
385 rc = USB_STOR_TRANSPORT_ERROR;
386
387 leave:
388 kfree(reply);
389 return rc;
390}
391
392
393static int datafab_handle_mode_sense(struct us_data *us,
394 struct scsi_cmnd * srb,
395 int sense_6)
396{
397 static unsigned char rw_err_page[12] = {
398 0x1, 0xA, 0x21, 1, 0, 0, 0, 0, 1, 0, 0, 0
399 };
400 static unsigned char cache_page[12] = {
401 0x8, 0xA, 0x1, 0, 0, 0, 0, 0, 0, 0, 0, 0
402 };
403 static unsigned char rbac_page[12] = {
404 0x1B, 0xA, 0, 0x81, 0, 0, 0, 0, 0, 0, 0, 0
405 };
406 static unsigned char timer_page[8] = {
407 0x1C, 0x6, 0, 0, 0, 0
408 };
409 unsigned char pc, page_code;
410 unsigned int i = 0;
411 struct datafab_info *info = (struct datafab_info *) (us->extra);
412 unsigned char *ptr = us->iobuf;
413
414 // most of this stuff is just a hack to get things working. the
415 // datafab reader doesn't present a SCSI interface so we
416 // fudge the SCSI commands...
417 //
418
419 pc = srb->cmnd[2] >> 6;
420 page_code = srb->cmnd[2] & 0x3F;
421
422 switch (pc) {
423 case 0x0:
424 US_DEBUGP("datafab_handle_mode_sense: Current values\n");
425 break;
426 case 0x1:
427 US_DEBUGP("datafab_handle_mode_sense: Changeable values\n");
428 break;
429 case 0x2:
430 US_DEBUGP("datafab_handle_mode_sense: Default values\n");
431 break;
432 case 0x3:
433 US_DEBUGP("datafab_handle_mode_sense: Saves values\n");
434 break;
435 }
436
437 memset(ptr, 0, 8);
438 if (sense_6) {
439 ptr[2] = 0x00; // WP enable: 0x80
440 i = 4;
441 } else {
442 ptr[3] = 0x00; // WP enable: 0x80
443 i = 8;
444 }
445
446 switch (page_code) {
447 default:
448 // vendor-specific mode
449 info->sense_key = 0x05;
450 info->sense_asc = 0x24;
451 info->sense_ascq = 0x00;
452 return USB_STOR_TRANSPORT_FAILED;
453
454 case 0x1:
455 memcpy(ptr + i, rw_err_page, sizeof(rw_err_page));
456 i += sizeof(rw_err_page);
457 break;
458
459 case 0x8:
460 memcpy(ptr + i, cache_page, sizeof(cache_page));
461 i += sizeof(cache_page);
462 break;
463
464 case 0x1B:
465 memcpy(ptr + i, rbac_page, sizeof(rbac_page));
466 i += sizeof(rbac_page);
467 break;
468
469 case 0x1C:
470 memcpy(ptr + i, timer_page, sizeof(timer_page));
471 i += sizeof(timer_page);
472 break;
473
474 case 0x3F: // retrieve all pages
475 memcpy(ptr + i, timer_page, sizeof(timer_page));
476 i += sizeof(timer_page);
477 memcpy(ptr + i, rbac_page, sizeof(rbac_page));
478 i += sizeof(rbac_page);
479 memcpy(ptr + i, cache_page, sizeof(cache_page));
480 i += sizeof(cache_page);
481 memcpy(ptr + i, rw_err_page, sizeof(rw_err_page));
482 i += sizeof(rw_err_page);
483 break;
484 }
485
486 if (sense_6)
487 ptr[0] = i - 1;
488 else
489 ((__be16 *) ptr)[0] = cpu_to_be16(i - 2);
490 usb_stor_set_xfer_buf(ptr, i, srb);
491
492 return USB_STOR_TRANSPORT_GOOD;
493}
494
495static void datafab_info_destructor(void *extra)
496{
497 // this routine is a placeholder...
498 // currently, we don't allocate any extra memory so we're okay
499}
500
501
502// Transport for the Datafab MDCFE-B
503//
504int datafab_transport(struct scsi_cmnd * srb, struct us_data *us)
505{
506 struct datafab_info *info;
507 int rc;
508 unsigned long block, blocks;
509 unsigned char *ptr = us->iobuf;
510 static unsigned char inquiry_reply[8] = {
511 0x00, 0x80, 0x00, 0x01, 0x1F, 0x00, 0x00, 0x00
512 };
513
514 if (!us->extra) {
Oliver Neukum887c2562006-01-08 12:33:45 +0100515 us->extra = kzalloc(sizeof(struct datafab_info), GFP_NOIO);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700516 if (!us->extra) {
517 US_DEBUGP("datafab_transport: Gah! "
518 "Can't allocate storage for Datafab info struct!\n");
519 return USB_STOR_TRANSPORT_ERROR;
520 }
Linus Torvalds1da177e2005-04-16 15:20:36 -0700521 us->extra_destructor = datafab_info_destructor;
522 ((struct datafab_info *)us->extra)->lun = -1;
523 }
524
525 info = (struct datafab_info *) (us->extra);
526
527 if (srb->cmnd[0] == INQUIRY) {
528 US_DEBUGP("datafab_transport: INQUIRY. Returning bogus response");
529 memcpy(ptr, inquiry_reply, sizeof(inquiry_reply));
530 fill_inquiry_response(us, ptr, 36);
531 return USB_STOR_TRANSPORT_GOOD;
532 }
533
534 if (srb->cmnd[0] == READ_CAPACITY) {
535 info->ssize = 0x200; // hard coded 512 byte sectors as per ATA spec
536 rc = datafab_id_device(us, info);
537 if (rc != USB_STOR_TRANSPORT_GOOD)
538 return rc;
539
540 US_DEBUGP("datafab_transport: READ_CAPACITY: %ld sectors, %ld bytes per sector\n",
541 info->sectors, info->ssize);
542
543 // build the reply
544 // we need the last sector, not the number of sectors
545 ((__be32 *) ptr)[0] = cpu_to_be32(info->sectors - 1);
546 ((__be32 *) ptr)[1] = cpu_to_be32(info->ssize);
547 usb_stor_set_xfer_buf(ptr, 8, srb);
548
549 return USB_STOR_TRANSPORT_GOOD;
550 }
551
552 if (srb->cmnd[0] == MODE_SELECT_10) {
553 US_DEBUGP("datafab_transport: Gah! MODE_SELECT_10.\n");
554 return USB_STOR_TRANSPORT_ERROR;
555 }
556
557 // don't bother implementing READ_6 or WRITE_6.
558 //
559 if (srb->cmnd[0] == READ_10) {
560 block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
561 ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5]));
562
563 blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8]));
564
565 US_DEBUGP("datafab_transport: READ_10: read block 0x%04lx count %ld\n", block, blocks);
566 return datafab_read_data(us, info, block, blocks);
567 }
568
569 if (srb->cmnd[0] == READ_12) {
570 // we'll probably never see a READ_12 but we'll do it anyway...
571 //
572 block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
573 ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5]));
574
575 blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) |
576 ((u32)(srb->cmnd[8]) << 8) | ((u32)(srb->cmnd[9]));
577
578 US_DEBUGP("datafab_transport: READ_12: read block 0x%04lx count %ld\n", block, blocks);
579 return datafab_read_data(us, info, block, blocks);
580 }
581
582 if (srb->cmnd[0] == WRITE_10) {
583 block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
584 ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5]));
585
586 blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8]));
587
588 US_DEBUGP("datafab_transport: WRITE_10: write block 0x%04lx count %ld\n", block, blocks);
589 return datafab_write_data(us, info, block, blocks);
590 }
591
592 if (srb->cmnd[0] == WRITE_12) {
593 // we'll probably never see a WRITE_12 but we'll do it anyway...
594 //
595 block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
596 ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5]));
597
598 blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) |
599 ((u32)(srb->cmnd[8]) << 8) | ((u32)(srb->cmnd[9]));
600
601 US_DEBUGP("datafab_transport: WRITE_12: write block 0x%04lx count %ld\n", block, blocks);
602 return datafab_write_data(us, info, block, blocks);
603 }
604
605 if (srb->cmnd[0] == TEST_UNIT_READY) {
606 US_DEBUGP("datafab_transport: TEST_UNIT_READY.\n");
607 return datafab_id_device(us, info);
608 }
609
610 if (srb->cmnd[0] == REQUEST_SENSE) {
611 US_DEBUGP("datafab_transport: REQUEST_SENSE. Returning faked response\n");
612
613 // this response is pretty bogus right now. eventually if necessary
614 // we can set the correct sense data. so far though it hasn't been
615 // necessary
616 //
617 memset(ptr, 0, 18);
618 ptr[0] = 0xF0;
619 ptr[2] = info->sense_key;
620 ptr[7] = 11;
621 ptr[12] = info->sense_asc;
622 ptr[13] = info->sense_ascq;
623 usb_stor_set_xfer_buf(ptr, 18, srb);
624
625 return USB_STOR_TRANSPORT_GOOD;
626 }
627
628 if (srb->cmnd[0] == MODE_SENSE) {
629 US_DEBUGP("datafab_transport: MODE_SENSE_6 detected\n");
630 return datafab_handle_mode_sense(us, srb, 1);
631 }
632
633 if (srb->cmnd[0] == MODE_SENSE_10) {
634 US_DEBUGP("datafab_transport: MODE_SENSE_10 detected\n");
635 return datafab_handle_mode_sense(us, srb, 0);
636 }
637
638 if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) {
639 // sure. whatever. not like we can stop the user from
640 // popping the media out of the device (no locking doors, etc)
641 //
642 return USB_STOR_TRANSPORT_GOOD;
643 }
644
645 if (srb->cmnd[0] == START_STOP) {
646 /* this is used by sd.c'check_scsidisk_media_change to detect
647 media change */
648 US_DEBUGP("datafab_transport: START_STOP.\n");
649 /* the first datafab_id_device after a media change returns
650 an error (determined experimentally) */
651 rc = datafab_id_device(us, info);
652 if (rc == USB_STOR_TRANSPORT_GOOD) {
653 info->sense_key = NO_SENSE;
654 srb->result = SUCCESS;
655 } else {
656 info->sense_key = UNIT_ATTENTION;
657 srb->result = SAM_STAT_CHECK_CONDITION;
658 }
659 return rc;
660 }
661
662 US_DEBUGP("datafab_transport: Gah! Unknown command: %d (0x%x)\n",
663 srb->cmnd[0], srb->cmnd[0]);
664 info->sense_key = 0x05;
665 info->sense_asc = 0x20;
666 info->sense_ascq = 0x00;
667 return USB_STOR_TRANSPORT_FAILED;
668}