Gyungoh Yoo | ffee190 | 2012-08-09 14:24:34 -0600 | [diff] [blame] | 1 | /* |
| 2 | * max8907-regulator.c -- support regulators in max8907 |
| 3 | * |
| 4 | * Copyright (C) 2010 Gyungoh Yoo <jack.yoo@maxim-ic.com> |
| 5 | * Copyright (C) 2010-2012, NVIDIA CORPORATION. All rights reserved. |
| 6 | * |
| 7 | * Portions based on drivers/regulator/tps65910-regulator.c, |
| 8 | * Copyright 2010 Texas Instruments Inc. |
| 9 | * Author: Graeme Gregory <gg@slimlogic.co.uk> |
| 10 | * Author: Jorge Eduardo Candelaria <jedu@slimlogic.co.uk> |
| 11 | * |
| 12 | * This program is free software; you can redistribute it and/or modify |
| 13 | * it under the terms of the GNU General Public License version 2 as |
| 14 | * published by the Free Software Foundation. |
| 15 | */ |
| 16 | |
| 17 | #include <linux/err.h> |
| 18 | #include <linux/init.h> |
| 19 | #include <linux/mfd/core.h> |
| 20 | #include <linux/mfd/max8907.h> |
| 21 | #include <linux/module.h> |
| 22 | #include <linux/of.h> |
| 23 | #include <linux/platform_device.h> |
| 24 | #include <linux/regulator/driver.h> |
| 25 | #include <linux/regulator/machine.h> |
| 26 | #include <linux/regulator/of_regulator.h> |
| 27 | #include <linux/regmap.h> |
| 28 | #include <linux/slab.h> |
| 29 | |
| 30 | #define MAX8907_II2RR_VERSION_MASK 0xF0 |
| 31 | #define MAX8907_II2RR_VERSION_REV_A 0x00 |
| 32 | #define MAX8907_II2RR_VERSION_REV_B 0x10 |
| 33 | #define MAX8907_II2RR_VERSION_REV_C 0x30 |
| 34 | |
| 35 | struct max8907_regulator { |
| 36 | struct regulator_desc desc[MAX8907_NUM_REGULATORS]; |
| 37 | struct regulator_dev *rdev[MAX8907_NUM_REGULATORS]; |
| 38 | }; |
| 39 | |
| 40 | #define REG_MBATT() \ |
| 41 | [MAX8907_MBATT] = { \ |
| 42 | .name = "MBATT", \ |
| 43 | .supply_name = "mbatt", \ |
| 44 | .id = MAX8907_MBATT, \ |
| 45 | .ops = &max8907_mbatt_ops, \ |
| 46 | .type = REGULATOR_VOLTAGE, \ |
| 47 | .owner = THIS_MODULE, \ |
| 48 | } |
| 49 | |
| 50 | #define REG_LDO(ids, supply, base, min, max, step) \ |
| 51 | [MAX8907_##ids] = { \ |
| 52 | .name = #ids, \ |
| 53 | .supply_name = supply, \ |
| 54 | .id = MAX8907_##ids, \ |
| 55 | .n_voltages = ((max) - (min)) / (step) + 1, \ |
| 56 | .ops = &max8907_ldo_ops, \ |
| 57 | .type = REGULATOR_VOLTAGE, \ |
| 58 | .owner = THIS_MODULE, \ |
| 59 | .min_uV = (min), \ |
| 60 | .uV_step = (step), \ |
| 61 | .vsel_reg = (base) + MAX8907_VOUT, \ |
| 62 | .vsel_mask = 0x3f, \ |
| 63 | .enable_reg = (base) + MAX8907_CTL, \ |
| 64 | .enable_mask = MAX8907_MASK_LDO_EN, \ |
| 65 | } |
| 66 | |
| 67 | #define REG_FIXED(ids, supply, voltage) \ |
| 68 | [MAX8907_##ids] = { \ |
| 69 | .name = #ids, \ |
| 70 | .supply_name = supply, \ |
| 71 | .id = MAX8907_##ids, \ |
| 72 | .n_voltages = 1, \ |
| 73 | .ops = &max8907_fixed_ops, \ |
| 74 | .type = REGULATOR_VOLTAGE, \ |
| 75 | .owner = THIS_MODULE, \ |
| 76 | .min_uV = (voltage), \ |
| 77 | } |
| 78 | |
| 79 | #define REG_OUT5V(ids, supply, base, voltage) \ |
| 80 | [MAX8907_##ids] = { \ |
| 81 | .name = #ids, \ |
| 82 | .supply_name = supply, \ |
| 83 | .id = MAX8907_##ids, \ |
| 84 | .n_voltages = 1, \ |
| 85 | .ops = &max8907_out5v_ops, \ |
| 86 | .type = REGULATOR_VOLTAGE, \ |
| 87 | .owner = THIS_MODULE, \ |
| 88 | .min_uV = (voltage), \ |
| 89 | .enable_reg = (base), \ |
| 90 | .enable_mask = MAX8907_MASK_OUT5V_EN, \ |
| 91 | } |
| 92 | |
| 93 | #define REG_BBAT(ids, supply, base, min, max, step) \ |
| 94 | [MAX8907_##ids] = { \ |
| 95 | .name = #ids, \ |
| 96 | .supply_name = supply, \ |
| 97 | .id = MAX8907_##ids, \ |
| 98 | .n_voltages = ((max) - (min)) / (step) + 1, \ |
| 99 | .ops = &max8907_bbat_ops, \ |
| 100 | .type = REGULATOR_VOLTAGE, \ |
| 101 | .owner = THIS_MODULE, \ |
| 102 | .min_uV = (min), \ |
| 103 | .uV_step = (step), \ |
| 104 | .vsel_reg = (base), \ |
| 105 | .vsel_mask = MAX8907_MASK_VBBATTCV, \ |
| 106 | } |
| 107 | |
| 108 | #define LDO_750_50(id, supply, base) REG_LDO(id, supply, (base), \ |
| 109 | 750000, 3900000, 50000) |
| 110 | #define LDO_650_25(id, supply, base) REG_LDO(id, supply, (base), \ |
| 111 | 650000, 2225000, 25000) |
| 112 | |
| 113 | static struct regulator_ops max8907_mbatt_ops = { |
| 114 | }; |
| 115 | |
| 116 | static struct regulator_ops max8907_ldo_ops = { |
| 117 | .list_voltage = regulator_list_voltage_linear, |
| 118 | .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| 119 | .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| 120 | .enable = regulator_enable_regmap, |
| 121 | .disable = regulator_disable_regmap, |
| 122 | .is_enabled = regulator_is_enabled_regmap, |
| 123 | }; |
| 124 | |
| 125 | static struct regulator_ops max8907_ldo_hwctl_ops = { |
| 126 | .list_voltage = regulator_list_voltage_linear, |
| 127 | .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| 128 | .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| 129 | }; |
| 130 | |
| 131 | static struct regulator_ops max8907_fixed_ops = { |
| 132 | .list_voltage = regulator_list_voltage_linear, |
| 133 | }; |
| 134 | |
| 135 | static struct regulator_ops max8907_out5v_ops = { |
| 136 | .list_voltage = regulator_list_voltage_linear, |
| 137 | .enable = regulator_enable_regmap, |
| 138 | .disable = regulator_disable_regmap, |
| 139 | .is_enabled = regulator_is_enabled_regmap, |
| 140 | }; |
| 141 | |
| 142 | static struct regulator_ops max8907_out5v_hwctl_ops = { |
| 143 | .list_voltage = regulator_list_voltage_linear, |
| 144 | }; |
| 145 | |
| 146 | static struct regulator_ops max8907_bbat_ops = { |
| 147 | .list_voltage = regulator_list_voltage_linear, |
| 148 | .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| 149 | .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| 150 | }; |
| 151 | |
| 152 | static struct regulator_desc max8907_regulators[] = { |
| 153 | REG_MBATT(), |
| 154 | REG_LDO(SD1, "in-v1", MAX8907_REG_SDCTL1, 650000, 2225000, 25000), |
| 155 | REG_LDO(SD2, "in-v2", MAX8907_REG_SDCTL2, 637500, 1425000, 12500), |
| 156 | REG_LDO(SD3, "in-v3", MAX8907_REG_SDCTL3, 750000, 3900000, 50000), |
| 157 | LDO_750_50(LDO1, "in1", MAX8907_REG_LDOCTL1), |
| 158 | LDO_650_25(LDO2, "in2", MAX8907_REG_LDOCTL2), |
| 159 | LDO_650_25(LDO3, "in3", MAX8907_REG_LDOCTL3), |
| 160 | LDO_750_50(LDO4, "in4", MAX8907_REG_LDOCTL4), |
| 161 | LDO_750_50(LDO5, "in5", MAX8907_REG_LDOCTL5), |
| 162 | LDO_750_50(LDO6, "in6", MAX8907_REG_LDOCTL6), |
| 163 | LDO_750_50(LDO7, "in7", MAX8907_REG_LDOCTL7), |
| 164 | LDO_750_50(LDO8, "in8", MAX8907_REG_LDOCTL8), |
| 165 | LDO_750_50(LDO9, "in9", MAX8907_REG_LDOCTL9), |
| 166 | LDO_750_50(LDO10, "in10", MAX8907_REG_LDOCTL10), |
| 167 | LDO_750_50(LDO11, "in11", MAX8907_REG_LDOCTL11), |
| 168 | LDO_750_50(LDO12, "in12", MAX8907_REG_LDOCTL12), |
| 169 | LDO_750_50(LDO13, "in13", MAX8907_REG_LDOCTL13), |
| 170 | LDO_750_50(LDO14, "in14", MAX8907_REG_LDOCTL14), |
| 171 | LDO_750_50(LDO15, "in15", MAX8907_REG_LDOCTL15), |
| 172 | LDO_750_50(LDO16, "in16", MAX8907_REG_LDOCTL16), |
| 173 | LDO_650_25(LDO17, "in17", MAX8907_REG_LDOCTL17), |
| 174 | LDO_650_25(LDO18, "in18", MAX8907_REG_LDOCTL18), |
| 175 | LDO_750_50(LDO19, "in19", MAX8907_REG_LDOCTL19), |
| 176 | LDO_750_50(LDO20, "in20", MAX8907_REG_LDOCTL20), |
| 177 | REG_OUT5V(OUT5V, "mbatt", MAX8907_REG_OUT5VEN, 5000000), |
| 178 | REG_OUT5V(OUT33V, "mbatt", MAX8907_REG_OUT33VEN, 3300000), |
| 179 | REG_BBAT(BBAT, "MBATT", MAX8907_REG_BBAT_CNFG, |
| 180 | 2400000, 3000000, 200000), |
| 181 | REG_FIXED(SDBY, "MBATT", 1200000), |
| 182 | REG_FIXED(VRTC, "MBATT", 3300000), |
| 183 | }; |
| 184 | |
| 185 | #ifdef CONFIG_OF |
| 186 | |
| 187 | #define MATCH(_name, _id) \ |
| 188 | [MAX8907_##_id] = { \ |
| 189 | .name = #_name, \ |
| 190 | .driver_data = (void *)&max8907_regulators[MAX8907_##_id], \ |
| 191 | } |
| 192 | |
| 193 | static struct of_regulator_match max8907_matches[] = { |
| 194 | MATCH(mbatt, MBATT), |
| 195 | MATCH(sd1, SD1), |
| 196 | MATCH(sd2, SD2), |
| 197 | MATCH(sd3, SD3), |
| 198 | MATCH(ldo1, LDO1), |
| 199 | MATCH(ldo2, LDO2), |
| 200 | MATCH(ldo3, LDO3), |
| 201 | MATCH(ldo4, LDO4), |
| 202 | MATCH(ldo5, LDO5), |
| 203 | MATCH(ldo6, LDO6), |
| 204 | MATCH(ldo7, LDO7), |
| 205 | MATCH(ldo8, LDO8), |
| 206 | MATCH(ldo9, LDO9), |
| 207 | MATCH(ldo10, LDO10), |
| 208 | MATCH(ldo11, LDO11), |
| 209 | MATCH(ldo12, LDO12), |
| 210 | MATCH(ldo13, LDO13), |
| 211 | MATCH(ldo14, LDO14), |
| 212 | MATCH(ldo15, LDO15), |
| 213 | MATCH(ldo16, LDO16), |
| 214 | MATCH(ldo17, LDO17), |
| 215 | MATCH(ldo18, LDO18), |
| 216 | MATCH(ldo19, LDO19), |
| 217 | MATCH(ldo20, LDO20), |
| 218 | MATCH(out5v, OUT5V), |
| 219 | MATCH(out33v, OUT33V), |
| 220 | MATCH(bbat, BBAT), |
| 221 | MATCH(sdby, SDBY), |
| 222 | MATCH(vrtc, VRTC), |
| 223 | }; |
| 224 | |
| 225 | static int max8907_regulator_parse_dt(struct platform_device *pdev) |
| 226 | { |
| 227 | struct device_node *np = pdev->dev.parent->of_node; |
| 228 | struct device_node *regulators; |
| 229 | int ret; |
| 230 | |
| 231 | if (!pdev->dev.parent->of_node) |
| 232 | return 0; |
| 233 | |
| 234 | regulators = of_find_node_by_name(np, "regulators"); |
| 235 | if (!regulators) { |
| 236 | dev_err(&pdev->dev, "regulators node not found\n"); |
| 237 | return -EINVAL; |
| 238 | } |
| 239 | |
| 240 | ret = of_regulator_match(pdev->dev.parent, regulators, |
| 241 | max8907_matches, |
| 242 | ARRAY_SIZE(max8907_matches)); |
| 243 | if (ret < 0) { |
| 244 | dev_err(&pdev->dev, "Error parsing regulator init data: %d\n", |
| 245 | ret); |
| 246 | return ret; |
| 247 | } |
| 248 | |
| 249 | return 0; |
| 250 | } |
Stephen Warren | db55168 | 2012-08-20 09:39:10 -0600 | [diff] [blame] | 251 | |
| 252 | static inline struct regulator_init_data *match_init_data(int index) |
| 253 | { |
| 254 | return max8907_matches[index].init_data; |
| 255 | } |
| 256 | |
| 257 | static inline struct device_node *match_of_node(int index) |
| 258 | { |
| 259 | return max8907_matches[index].of_node; |
| 260 | } |
Gyungoh Yoo | ffee190 | 2012-08-09 14:24:34 -0600 | [diff] [blame] | 261 | #else |
| 262 | static int max8907_regulator_parse_dt(struct platform_device *pdev) |
| 263 | { |
| 264 | return 0; |
| 265 | } |
Stephen Warren | db55168 | 2012-08-20 09:39:10 -0600 | [diff] [blame] | 266 | |
| 267 | static inline struct regulator_init_data *match_init_data(int index) |
| 268 | { |
| 269 | return NULL; |
| 270 | } |
| 271 | |
| 272 | static inline struct device_node *match_of_node(int index) |
| 273 | { |
| 274 | return NULL; |
| 275 | } |
Gyungoh Yoo | ffee190 | 2012-08-09 14:24:34 -0600 | [diff] [blame] | 276 | #endif |
| 277 | |
| 278 | static __devinit int max8907_regulator_probe(struct platform_device *pdev) |
| 279 | { |
| 280 | struct max8907 *max8907 = dev_get_drvdata(pdev->dev.parent); |
| 281 | struct max8907_platform_data *pdata = dev_get_platdata(max8907->dev); |
| 282 | int ret; |
| 283 | struct max8907_regulator *pmic; |
| 284 | unsigned int val; |
| 285 | int i; |
| 286 | struct regulator_config config = {}; |
| 287 | struct regulator_init_data *idata; |
| 288 | const char *mbatt_rail_name = NULL; |
| 289 | |
| 290 | ret = max8907_regulator_parse_dt(pdev); |
| 291 | if (ret) |
| 292 | return ret; |
| 293 | |
| 294 | pmic = devm_kzalloc(&pdev->dev, sizeof(*pmic), GFP_KERNEL); |
| 295 | if (!pmic) { |
| 296 | dev_err(&pdev->dev, "Failed to alloc pmic\n"); |
| 297 | return -ENOMEM; |
| 298 | } |
| 299 | platform_set_drvdata(pdev, pmic); |
| 300 | |
| 301 | memcpy(pmic->desc, max8907_regulators, sizeof(pmic->desc)); |
| 302 | |
| 303 | /* Backwards compatibility with MAX8907B; SD1 uses different voltages */ |
| 304 | regmap_read(max8907->regmap_gen, MAX8907_REG_II2RR, &val); |
| 305 | if ((val & MAX8907_II2RR_VERSION_MASK) == |
| 306 | MAX8907_II2RR_VERSION_REV_B) { |
| 307 | pmic->desc[MAX8907_SD1].min_uV = 637500; |
| 308 | pmic->desc[MAX8907_SD1].uV_step = 12500; |
Axel Lin | 7305608 | 2012-08-16 12:26:02 +0800 | [diff] [blame] | 309 | pmic->desc[MAX8907_SD1].n_voltages = |
| 310 | (1425000 - 637500) / 12500 + 1; |
Gyungoh Yoo | ffee190 | 2012-08-09 14:24:34 -0600 | [diff] [blame] | 311 | } |
| 312 | |
| 313 | for (i = 0; i < MAX8907_NUM_REGULATORS; i++) { |
| 314 | config.dev = pdev->dev.parent; |
| 315 | if (pdata) |
| 316 | idata = pdata->init_data[i]; |
| 317 | else |
Stephen Warren | db55168 | 2012-08-20 09:39:10 -0600 | [diff] [blame] | 318 | idata = match_init_data(i); |
Gyungoh Yoo | ffee190 | 2012-08-09 14:24:34 -0600 | [diff] [blame] | 319 | config.init_data = idata; |
| 320 | config.driver_data = pmic; |
| 321 | config.regmap = max8907->regmap_gen; |
Stephen Warren | db55168 | 2012-08-20 09:39:10 -0600 | [diff] [blame] | 322 | config.of_node = match_of_node(i); |
Gyungoh Yoo | ffee190 | 2012-08-09 14:24:34 -0600 | [diff] [blame] | 323 | |
| 324 | switch (pmic->desc[i].id) { |
| 325 | case MAX8907_MBATT: |
Stephen Warren | 5fc72f5 | 2012-08-23 12:19:18 -0600 | [diff] [blame] | 326 | if (idata && idata->constraints.name) |
| 327 | mbatt_rail_name = idata->constraints.name; |
| 328 | else |
| 329 | mbatt_rail_name = pmic->desc[i].name; |
Gyungoh Yoo | ffee190 | 2012-08-09 14:24:34 -0600 | [diff] [blame] | 330 | break; |
| 331 | case MAX8907_BBAT: |
| 332 | case MAX8907_SDBY: |
| 333 | case MAX8907_VRTC: |
| 334 | idata->supply_regulator = mbatt_rail_name; |
| 335 | break; |
| 336 | } |
| 337 | |
| 338 | if (pmic->desc[i].ops == &max8907_ldo_ops) { |
| 339 | regmap_read(config.regmap, pmic->desc[i].enable_reg, |
| 340 | &val); |
| 341 | if ((val & MAX8907_MASK_LDO_SEQ) != |
| 342 | MAX8907_MASK_LDO_SEQ) |
| 343 | pmic->desc[i].ops = &max8907_ldo_hwctl_ops; |
| 344 | } else if (pmic->desc[i].ops == &max8907_out5v_ops) { |
| 345 | regmap_read(config.regmap, pmic->desc[i].enable_reg, |
| 346 | &val); |
| 347 | if ((val & (MAX8907_MASK_OUT5V_VINEN | |
| 348 | MAX8907_MASK_OUT5V_ENSRC)) != |
| 349 | MAX8907_MASK_OUT5V_ENSRC) |
| 350 | pmic->desc[i].ops = &max8907_out5v_hwctl_ops; |
| 351 | } |
| 352 | |
| 353 | pmic->rdev[i] = regulator_register(&pmic->desc[i], &config); |
| 354 | if (IS_ERR(pmic->rdev[i])) { |
| 355 | dev_err(&pdev->dev, |
| 356 | "failed to register %s regulator\n", |
| 357 | pmic->desc[i].name); |
| 358 | ret = PTR_ERR(pmic->rdev[i]); |
| 359 | goto err_unregister_regulator; |
| 360 | } |
| 361 | } |
| 362 | |
| 363 | return 0; |
| 364 | |
| 365 | err_unregister_regulator: |
| 366 | while (--i >= 0) |
| 367 | regulator_unregister(pmic->rdev[i]); |
| 368 | return ret; |
| 369 | } |
| 370 | |
| 371 | static __devexit int max8907_regulator_remove(struct platform_device *pdev) |
| 372 | { |
Axel Lin | 0764ef5 | 2012-08-18 14:33:05 +0800 | [diff] [blame] | 373 | struct max8907_regulator *pmic = platform_get_drvdata(pdev); |
Gyungoh Yoo | ffee190 | 2012-08-09 14:24:34 -0600 | [diff] [blame] | 374 | int i; |
| 375 | |
| 376 | for (i = 0; i < MAX8907_NUM_REGULATORS; i++) |
| 377 | regulator_unregister(pmic->rdev[i]); |
| 378 | |
| 379 | return 0; |
| 380 | } |
| 381 | |
| 382 | static struct platform_driver max8907_regulator_driver = { |
| 383 | .driver = { |
| 384 | .name = "max8907-regulator", |
| 385 | .owner = THIS_MODULE, |
| 386 | }, |
| 387 | .probe = max8907_regulator_probe, |
| 388 | .remove = __devexit_p(max8907_regulator_remove), |
| 389 | }; |
| 390 | |
| 391 | static int __init max8907_regulator_init(void) |
| 392 | { |
| 393 | return platform_driver_register(&max8907_regulator_driver); |
| 394 | } |
| 395 | |
| 396 | subsys_initcall(max8907_regulator_init); |
| 397 | |
| 398 | static void __exit max8907_reg_exit(void) |
| 399 | { |
| 400 | platform_driver_unregister(&max8907_regulator_driver); |
| 401 | } |
| 402 | |
| 403 | module_exit(max8907_reg_exit); |
| 404 | |
| 405 | MODULE_DESCRIPTION("MAX8907 regulator driver"); |
| 406 | MODULE_AUTHOR("Gyungoh Yoo <jack.yoo@maxim-ic.com>"); |
| 407 | MODULE_LICENSE("GPL v2"); |
Axel Lin | d154f0a | 2012-08-25 14:56:48 +0800 | [diff] [blame] | 408 | MODULE_ALIAS("platform:max8907-regulator"); |