Tomi Valkeinen | dbc2384 | 2013-05-24 14:22:20 +0300 | [diff] [blame] | 1 | /* |
| 2 | * Generic DSI Command Mode panel driver |
| 3 | * |
| 4 | * Copyright (C) 2013 Texas Instruments |
| 5 | * Author: Tomi Valkeinen <tomi.valkeinen@ti.com> |
| 6 | * |
| 7 | * This program is free software; you can redistribute it and/or modify it |
| 8 | * under the terms of the GNU General Public License version 2 as published by |
| 9 | * the Free Software Foundation. |
| 10 | */ |
| 11 | |
| 12 | /* #define DEBUG */ |
| 13 | |
| 14 | #include <linux/backlight.h> |
| 15 | #include <linux/delay.h> |
| 16 | #include <linux/fb.h> |
| 17 | #include <linux/gpio.h> |
| 18 | #include <linux/interrupt.h> |
| 19 | #include <linux/jiffies.h> |
| 20 | #include <linux/module.h> |
| 21 | #include <linux/platform_device.h> |
| 22 | #include <linux/sched.h> |
| 23 | #include <linux/slab.h> |
| 24 | #include <linux/workqueue.h> |
| 25 | |
| 26 | #include <video/omapdss.h> |
| 27 | #include <video/omap-panel-data.h> |
| 28 | #include <video/mipi_display.h> |
| 29 | |
| 30 | /* DSI Virtual channel. Hardcoded for now. */ |
| 31 | #define TCH 0 |
| 32 | |
| 33 | #define DCS_READ_NUM_ERRORS 0x05 |
| 34 | #define DCS_BRIGHTNESS 0x51 |
| 35 | #define DCS_CTRL_DISPLAY 0x53 |
| 36 | #define DCS_GET_ID1 0xda |
| 37 | #define DCS_GET_ID2 0xdb |
| 38 | #define DCS_GET_ID3 0xdc |
| 39 | |
| 40 | struct panel_drv_data { |
| 41 | struct omap_dss_device dssdev; |
| 42 | struct omap_dss_device *in; |
| 43 | |
| 44 | struct omap_video_timings timings; |
| 45 | |
| 46 | struct platform_device *pdev; |
| 47 | |
| 48 | struct mutex lock; |
| 49 | |
| 50 | struct backlight_device *bldev; |
| 51 | |
| 52 | unsigned long hw_guard_end; /* next value of jiffies when we can |
| 53 | * issue the next sleep in/out command |
| 54 | */ |
| 55 | unsigned long hw_guard_wait; /* max guard time in jiffies */ |
| 56 | |
| 57 | /* panel HW configuration from DT or platform data */ |
| 58 | int reset_gpio; |
| 59 | int ext_te_gpio; |
| 60 | |
| 61 | bool use_dsi_backlight; |
| 62 | |
| 63 | struct omap_dsi_pin_config pin_config; |
| 64 | |
| 65 | /* runtime variables */ |
| 66 | bool enabled; |
| 67 | |
| 68 | bool te_enabled; |
| 69 | |
| 70 | atomic_t do_update; |
| 71 | int channel; |
| 72 | |
| 73 | struct delayed_work te_timeout_work; |
| 74 | |
| 75 | bool intro_printed; |
| 76 | |
| 77 | struct workqueue_struct *workqueue; |
| 78 | |
| 79 | bool ulps_enabled; |
| 80 | unsigned ulps_timeout; |
| 81 | struct delayed_work ulps_work; |
| 82 | }; |
| 83 | |
| 84 | #define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev) |
| 85 | |
| 86 | static irqreturn_t dsicm_te_isr(int irq, void *data); |
| 87 | static void dsicm_te_timeout_work_callback(struct work_struct *work); |
| 88 | static int _dsicm_enable_te(struct panel_drv_data *ddata, bool enable); |
| 89 | |
| 90 | static int dsicm_panel_reset(struct panel_drv_data *ddata); |
| 91 | |
| 92 | static void dsicm_ulps_work(struct work_struct *work); |
| 93 | |
| 94 | static void hw_guard_start(struct panel_drv_data *ddata, int guard_msec) |
| 95 | { |
| 96 | ddata->hw_guard_wait = msecs_to_jiffies(guard_msec); |
| 97 | ddata->hw_guard_end = jiffies + ddata->hw_guard_wait; |
| 98 | } |
| 99 | |
| 100 | static void hw_guard_wait(struct panel_drv_data *ddata) |
| 101 | { |
| 102 | unsigned long wait = ddata->hw_guard_end - jiffies; |
| 103 | |
| 104 | if ((long)wait > 0 && wait <= ddata->hw_guard_wait) { |
| 105 | set_current_state(TASK_UNINTERRUPTIBLE); |
| 106 | schedule_timeout(wait); |
| 107 | } |
| 108 | } |
| 109 | |
| 110 | static int dsicm_dcs_read_1(struct panel_drv_data *ddata, u8 dcs_cmd, u8 *data) |
| 111 | { |
| 112 | struct omap_dss_device *in = ddata->in; |
| 113 | int r; |
| 114 | u8 buf[1]; |
| 115 | |
| 116 | r = in->ops.dsi->dcs_read(in, ddata->channel, dcs_cmd, buf, 1); |
| 117 | |
| 118 | if (r < 0) |
| 119 | return r; |
| 120 | |
| 121 | *data = buf[0]; |
| 122 | |
| 123 | return 0; |
| 124 | } |
| 125 | |
| 126 | static int dsicm_dcs_write_0(struct panel_drv_data *ddata, u8 dcs_cmd) |
| 127 | { |
| 128 | struct omap_dss_device *in = ddata->in; |
| 129 | return in->ops.dsi->dcs_write(in, ddata->channel, &dcs_cmd, 1); |
| 130 | } |
| 131 | |
| 132 | static int dsicm_dcs_write_1(struct panel_drv_data *ddata, u8 dcs_cmd, u8 param) |
| 133 | { |
| 134 | struct omap_dss_device *in = ddata->in; |
| 135 | u8 buf[2] = { dcs_cmd, param }; |
| 136 | |
| 137 | return in->ops.dsi->dcs_write(in, ddata->channel, buf, 2); |
| 138 | } |
| 139 | |
| 140 | static int dsicm_sleep_in(struct panel_drv_data *ddata) |
| 141 | |
| 142 | { |
| 143 | struct omap_dss_device *in = ddata->in; |
| 144 | u8 cmd; |
| 145 | int r; |
| 146 | |
| 147 | hw_guard_wait(ddata); |
| 148 | |
| 149 | cmd = MIPI_DCS_ENTER_SLEEP_MODE; |
| 150 | r = in->ops.dsi->dcs_write_nosync(in, ddata->channel, &cmd, 1); |
| 151 | if (r) |
| 152 | return r; |
| 153 | |
| 154 | hw_guard_start(ddata, 120); |
| 155 | |
| 156 | usleep_range(5000, 10000); |
| 157 | |
| 158 | return 0; |
| 159 | } |
| 160 | |
| 161 | static int dsicm_sleep_out(struct panel_drv_data *ddata) |
| 162 | { |
| 163 | int r; |
| 164 | |
| 165 | hw_guard_wait(ddata); |
| 166 | |
| 167 | r = dsicm_dcs_write_0(ddata, MIPI_DCS_EXIT_SLEEP_MODE); |
| 168 | if (r) |
| 169 | return r; |
| 170 | |
| 171 | hw_guard_start(ddata, 120); |
| 172 | |
| 173 | usleep_range(5000, 10000); |
| 174 | |
| 175 | return 0; |
| 176 | } |
| 177 | |
| 178 | static int dsicm_get_id(struct panel_drv_data *ddata, u8 *id1, u8 *id2, u8 *id3) |
| 179 | { |
| 180 | int r; |
| 181 | |
| 182 | r = dsicm_dcs_read_1(ddata, DCS_GET_ID1, id1); |
| 183 | if (r) |
| 184 | return r; |
| 185 | r = dsicm_dcs_read_1(ddata, DCS_GET_ID2, id2); |
| 186 | if (r) |
| 187 | return r; |
| 188 | r = dsicm_dcs_read_1(ddata, DCS_GET_ID3, id3); |
| 189 | if (r) |
| 190 | return r; |
| 191 | |
| 192 | return 0; |
| 193 | } |
| 194 | |
| 195 | static int dsicm_set_update_window(struct panel_drv_data *ddata, |
| 196 | u16 x, u16 y, u16 w, u16 h) |
| 197 | { |
| 198 | struct omap_dss_device *in = ddata->in; |
| 199 | int r; |
| 200 | u16 x1 = x; |
| 201 | u16 x2 = x + w - 1; |
| 202 | u16 y1 = y; |
| 203 | u16 y2 = y + h - 1; |
| 204 | |
| 205 | u8 buf[5]; |
| 206 | buf[0] = MIPI_DCS_SET_COLUMN_ADDRESS; |
| 207 | buf[1] = (x1 >> 8) & 0xff; |
| 208 | buf[2] = (x1 >> 0) & 0xff; |
| 209 | buf[3] = (x2 >> 8) & 0xff; |
| 210 | buf[4] = (x2 >> 0) & 0xff; |
| 211 | |
| 212 | r = in->ops.dsi->dcs_write_nosync(in, ddata->channel, buf, sizeof(buf)); |
| 213 | if (r) |
| 214 | return r; |
| 215 | |
| 216 | buf[0] = MIPI_DCS_SET_PAGE_ADDRESS; |
| 217 | buf[1] = (y1 >> 8) & 0xff; |
| 218 | buf[2] = (y1 >> 0) & 0xff; |
| 219 | buf[3] = (y2 >> 8) & 0xff; |
| 220 | buf[4] = (y2 >> 0) & 0xff; |
| 221 | |
| 222 | r = in->ops.dsi->dcs_write_nosync(in, ddata->channel, buf, sizeof(buf)); |
| 223 | if (r) |
| 224 | return r; |
| 225 | |
| 226 | in->ops.dsi->bta_sync(in, ddata->channel); |
| 227 | |
| 228 | return r; |
| 229 | } |
| 230 | |
| 231 | static void dsicm_queue_ulps_work(struct panel_drv_data *ddata) |
| 232 | { |
| 233 | if (ddata->ulps_timeout > 0) |
| 234 | queue_delayed_work(ddata->workqueue, &ddata->ulps_work, |
| 235 | msecs_to_jiffies(ddata->ulps_timeout)); |
| 236 | } |
| 237 | |
| 238 | static void dsicm_cancel_ulps_work(struct panel_drv_data *ddata) |
| 239 | { |
| 240 | cancel_delayed_work(&ddata->ulps_work); |
| 241 | } |
| 242 | |
| 243 | static int dsicm_enter_ulps(struct panel_drv_data *ddata) |
| 244 | { |
| 245 | struct omap_dss_device *in = ddata->in; |
| 246 | int r; |
| 247 | |
| 248 | if (ddata->ulps_enabled) |
| 249 | return 0; |
| 250 | |
| 251 | dsicm_cancel_ulps_work(ddata); |
| 252 | |
| 253 | r = _dsicm_enable_te(ddata, false); |
| 254 | if (r) |
| 255 | goto err; |
| 256 | |
| 257 | if (gpio_is_valid(ddata->ext_te_gpio)) |
| 258 | disable_irq(gpio_to_irq(ddata->ext_te_gpio)); |
| 259 | |
| 260 | in->ops.dsi->disable(in, false, true); |
| 261 | |
| 262 | ddata->ulps_enabled = true; |
| 263 | |
| 264 | return 0; |
| 265 | |
| 266 | err: |
| 267 | dev_err(&ddata->pdev->dev, "enter ULPS failed"); |
| 268 | dsicm_panel_reset(ddata); |
| 269 | |
| 270 | ddata->ulps_enabled = false; |
| 271 | |
| 272 | dsicm_queue_ulps_work(ddata); |
| 273 | |
| 274 | return r; |
| 275 | } |
| 276 | |
| 277 | static int dsicm_exit_ulps(struct panel_drv_data *ddata) |
| 278 | { |
| 279 | struct omap_dss_device *in = ddata->in; |
| 280 | int r; |
| 281 | |
| 282 | if (!ddata->ulps_enabled) |
| 283 | return 0; |
| 284 | |
| 285 | r = in->ops.dsi->enable(in); |
| 286 | if (r) { |
| 287 | dev_err(&ddata->pdev->dev, "failed to enable DSI\n"); |
| 288 | goto err1; |
| 289 | } |
| 290 | |
| 291 | in->ops.dsi->enable_hs(in, ddata->channel, true); |
| 292 | |
| 293 | r = _dsicm_enable_te(ddata, true); |
| 294 | if (r) { |
| 295 | dev_err(&ddata->pdev->dev, "failed to re-enable TE"); |
| 296 | goto err2; |
| 297 | } |
| 298 | |
| 299 | if (gpio_is_valid(ddata->ext_te_gpio)) |
| 300 | enable_irq(gpio_to_irq(ddata->ext_te_gpio)); |
| 301 | |
| 302 | dsicm_queue_ulps_work(ddata); |
| 303 | |
| 304 | ddata->ulps_enabled = false; |
| 305 | |
| 306 | return 0; |
| 307 | |
| 308 | err2: |
| 309 | dev_err(&ddata->pdev->dev, "failed to exit ULPS"); |
| 310 | |
| 311 | r = dsicm_panel_reset(ddata); |
| 312 | if (!r) { |
| 313 | if (gpio_is_valid(ddata->ext_te_gpio)) |
| 314 | enable_irq(gpio_to_irq(ddata->ext_te_gpio)); |
| 315 | ddata->ulps_enabled = false; |
| 316 | } |
| 317 | err1: |
| 318 | dsicm_queue_ulps_work(ddata); |
| 319 | |
| 320 | return r; |
| 321 | } |
| 322 | |
| 323 | static int dsicm_wake_up(struct panel_drv_data *ddata) |
| 324 | { |
| 325 | if (ddata->ulps_enabled) |
| 326 | return dsicm_exit_ulps(ddata); |
| 327 | |
| 328 | dsicm_cancel_ulps_work(ddata); |
| 329 | dsicm_queue_ulps_work(ddata); |
| 330 | return 0; |
| 331 | } |
| 332 | |
| 333 | static int dsicm_bl_update_status(struct backlight_device *dev) |
| 334 | { |
| 335 | struct panel_drv_data *ddata = dev_get_drvdata(&dev->dev); |
| 336 | struct omap_dss_device *in = ddata->in; |
| 337 | int r; |
| 338 | int level; |
| 339 | |
| 340 | if (dev->props.fb_blank == FB_BLANK_UNBLANK && |
| 341 | dev->props.power == FB_BLANK_UNBLANK) |
| 342 | level = dev->props.brightness; |
| 343 | else |
| 344 | level = 0; |
| 345 | |
| 346 | dev_dbg(&ddata->pdev->dev, "update brightness to %d\n", level); |
| 347 | |
| 348 | mutex_lock(&ddata->lock); |
| 349 | |
| 350 | if (ddata->enabled) { |
| 351 | in->ops.dsi->bus_lock(in); |
| 352 | |
| 353 | r = dsicm_wake_up(ddata); |
| 354 | if (!r) |
| 355 | r = dsicm_dcs_write_1(ddata, DCS_BRIGHTNESS, level); |
| 356 | |
| 357 | in->ops.dsi->bus_unlock(in); |
| 358 | } else { |
| 359 | r = 0; |
| 360 | } |
| 361 | |
| 362 | mutex_unlock(&ddata->lock); |
| 363 | |
| 364 | return r; |
| 365 | } |
| 366 | |
| 367 | static int dsicm_bl_get_intensity(struct backlight_device *dev) |
| 368 | { |
| 369 | if (dev->props.fb_blank == FB_BLANK_UNBLANK && |
| 370 | dev->props.power == FB_BLANK_UNBLANK) |
| 371 | return dev->props.brightness; |
| 372 | |
| 373 | return 0; |
| 374 | } |
| 375 | |
| 376 | static const struct backlight_ops dsicm_bl_ops = { |
| 377 | .get_brightness = dsicm_bl_get_intensity, |
| 378 | .update_status = dsicm_bl_update_status, |
| 379 | }; |
| 380 | |
| 381 | static void dsicm_get_resolution(struct omap_dss_device *dssdev, |
| 382 | u16 *xres, u16 *yres) |
| 383 | { |
| 384 | *xres = dssdev->panel.timings.x_res; |
| 385 | *yres = dssdev->panel.timings.y_res; |
| 386 | } |
| 387 | |
| 388 | static ssize_t dsicm_num_errors_show(struct device *dev, |
| 389 | struct device_attribute *attr, char *buf) |
| 390 | { |
| 391 | struct platform_device *pdev = to_platform_device(dev); |
| 392 | struct panel_drv_data *ddata = platform_get_drvdata(pdev); |
| 393 | struct omap_dss_device *in = ddata->in; |
| 394 | u8 errors = 0; |
| 395 | int r; |
| 396 | |
| 397 | mutex_lock(&ddata->lock); |
| 398 | |
| 399 | if (ddata->enabled) { |
| 400 | in->ops.dsi->bus_lock(in); |
| 401 | |
| 402 | r = dsicm_wake_up(ddata); |
| 403 | if (!r) |
| 404 | r = dsicm_dcs_read_1(ddata, DCS_READ_NUM_ERRORS, |
| 405 | &errors); |
| 406 | |
| 407 | in->ops.dsi->bus_unlock(in); |
| 408 | } else { |
| 409 | r = -ENODEV; |
| 410 | } |
| 411 | |
| 412 | mutex_unlock(&ddata->lock); |
| 413 | |
| 414 | if (r) |
| 415 | return r; |
| 416 | |
| 417 | return snprintf(buf, PAGE_SIZE, "%d\n", errors); |
| 418 | } |
| 419 | |
| 420 | static ssize_t dsicm_hw_revision_show(struct device *dev, |
| 421 | struct device_attribute *attr, char *buf) |
| 422 | { |
| 423 | struct platform_device *pdev = to_platform_device(dev); |
| 424 | struct panel_drv_data *ddata = platform_get_drvdata(pdev); |
| 425 | struct omap_dss_device *in = ddata->in; |
| 426 | u8 id1, id2, id3; |
| 427 | int r; |
| 428 | |
| 429 | mutex_lock(&ddata->lock); |
| 430 | |
| 431 | if (ddata->enabled) { |
| 432 | in->ops.dsi->bus_lock(in); |
| 433 | |
| 434 | r = dsicm_wake_up(ddata); |
| 435 | if (!r) |
| 436 | r = dsicm_get_id(ddata, &id1, &id2, &id3); |
| 437 | |
| 438 | in->ops.dsi->bus_unlock(in); |
| 439 | } else { |
| 440 | r = -ENODEV; |
| 441 | } |
| 442 | |
| 443 | mutex_unlock(&ddata->lock); |
| 444 | |
| 445 | if (r) |
| 446 | return r; |
| 447 | |
| 448 | return snprintf(buf, PAGE_SIZE, "%02x.%02x.%02x\n", id1, id2, id3); |
| 449 | } |
| 450 | |
| 451 | static ssize_t dsicm_store_ulps(struct device *dev, |
| 452 | struct device_attribute *attr, |
| 453 | const char *buf, size_t count) |
| 454 | { |
| 455 | struct platform_device *pdev = to_platform_device(dev); |
| 456 | struct panel_drv_data *ddata = platform_get_drvdata(pdev); |
| 457 | struct omap_dss_device *in = ddata->in; |
| 458 | unsigned long t; |
| 459 | int r; |
| 460 | |
| 461 | r = kstrtoul(buf, 0, &t); |
| 462 | if (r) |
| 463 | return r; |
| 464 | |
| 465 | mutex_lock(&ddata->lock); |
| 466 | |
| 467 | if (ddata->enabled) { |
| 468 | in->ops.dsi->bus_lock(in); |
| 469 | |
| 470 | if (t) |
| 471 | r = dsicm_enter_ulps(ddata); |
| 472 | else |
| 473 | r = dsicm_wake_up(ddata); |
| 474 | |
| 475 | in->ops.dsi->bus_unlock(in); |
| 476 | } |
| 477 | |
| 478 | mutex_unlock(&ddata->lock); |
| 479 | |
| 480 | if (r) |
| 481 | return r; |
| 482 | |
| 483 | return count; |
| 484 | } |
| 485 | |
| 486 | static ssize_t dsicm_show_ulps(struct device *dev, |
| 487 | struct device_attribute *attr, |
| 488 | char *buf) |
| 489 | { |
| 490 | struct platform_device *pdev = to_platform_device(dev); |
| 491 | struct panel_drv_data *ddata = platform_get_drvdata(pdev); |
| 492 | unsigned t; |
| 493 | |
| 494 | mutex_lock(&ddata->lock); |
| 495 | t = ddata->ulps_enabled; |
| 496 | mutex_unlock(&ddata->lock); |
| 497 | |
| 498 | return snprintf(buf, PAGE_SIZE, "%u\n", t); |
| 499 | } |
| 500 | |
| 501 | static ssize_t dsicm_store_ulps_timeout(struct device *dev, |
| 502 | struct device_attribute *attr, |
| 503 | const char *buf, size_t count) |
| 504 | { |
| 505 | struct platform_device *pdev = to_platform_device(dev); |
| 506 | struct panel_drv_data *ddata = platform_get_drvdata(pdev); |
| 507 | struct omap_dss_device *in = ddata->in; |
| 508 | unsigned long t; |
| 509 | int r; |
| 510 | |
| 511 | r = kstrtoul(buf, 0, &t); |
| 512 | if (r) |
| 513 | return r; |
| 514 | |
| 515 | mutex_lock(&ddata->lock); |
| 516 | ddata->ulps_timeout = t; |
| 517 | |
| 518 | if (ddata->enabled) { |
| 519 | /* dsicm_wake_up will restart the timer */ |
| 520 | in->ops.dsi->bus_lock(in); |
| 521 | r = dsicm_wake_up(ddata); |
| 522 | in->ops.dsi->bus_unlock(in); |
| 523 | } |
| 524 | |
| 525 | mutex_unlock(&ddata->lock); |
| 526 | |
| 527 | if (r) |
| 528 | return r; |
| 529 | |
| 530 | return count; |
| 531 | } |
| 532 | |
| 533 | static ssize_t dsicm_show_ulps_timeout(struct device *dev, |
| 534 | struct device_attribute *attr, |
| 535 | char *buf) |
| 536 | { |
| 537 | struct platform_device *pdev = to_platform_device(dev); |
| 538 | struct panel_drv_data *ddata = platform_get_drvdata(pdev); |
| 539 | unsigned t; |
| 540 | |
| 541 | mutex_lock(&ddata->lock); |
| 542 | t = ddata->ulps_timeout; |
| 543 | mutex_unlock(&ddata->lock); |
| 544 | |
| 545 | return snprintf(buf, PAGE_SIZE, "%u\n", t); |
| 546 | } |
| 547 | |
| 548 | static DEVICE_ATTR(num_dsi_errors, S_IRUGO, dsicm_num_errors_show, NULL); |
| 549 | static DEVICE_ATTR(hw_revision, S_IRUGO, dsicm_hw_revision_show, NULL); |
| 550 | static DEVICE_ATTR(ulps, S_IRUGO | S_IWUSR, |
| 551 | dsicm_show_ulps, dsicm_store_ulps); |
| 552 | static DEVICE_ATTR(ulps_timeout, S_IRUGO | S_IWUSR, |
| 553 | dsicm_show_ulps_timeout, dsicm_store_ulps_timeout); |
| 554 | |
| 555 | static struct attribute *dsicm_attrs[] = { |
| 556 | &dev_attr_num_dsi_errors.attr, |
| 557 | &dev_attr_hw_revision.attr, |
| 558 | &dev_attr_ulps.attr, |
| 559 | &dev_attr_ulps_timeout.attr, |
| 560 | NULL, |
| 561 | }; |
| 562 | |
| 563 | static struct attribute_group dsicm_attr_group = { |
| 564 | .attrs = dsicm_attrs, |
| 565 | }; |
| 566 | |
| 567 | static void dsicm_hw_reset(struct panel_drv_data *ddata) |
| 568 | { |
| 569 | if (!gpio_is_valid(ddata->reset_gpio)) |
| 570 | return; |
| 571 | |
| 572 | gpio_set_value(ddata->reset_gpio, 1); |
| 573 | udelay(10); |
| 574 | /* reset the panel */ |
| 575 | gpio_set_value(ddata->reset_gpio, 0); |
| 576 | /* assert reset */ |
| 577 | udelay(10); |
| 578 | gpio_set_value(ddata->reset_gpio, 1); |
| 579 | /* wait after releasing reset */ |
| 580 | usleep_range(5000, 10000); |
| 581 | } |
| 582 | |
| 583 | static int dsicm_power_on(struct panel_drv_data *ddata) |
| 584 | { |
| 585 | struct omap_dss_device *in = ddata->in; |
| 586 | u8 id1, id2, id3; |
| 587 | int r; |
| 588 | struct omap_dss_dsi_config dsi_config = { |
| 589 | .mode = OMAP_DSS_DSI_CMD_MODE, |
| 590 | .pixel_format = OMAP_DSS_DSI_FMT_RGB888, |
| 591 | .timings = &ddata->timings, |
| 592 | .hs_clk_min = 150000000, |
| 593 | .hs_clk_max = 300000000, |
| 594 | .lp_clk_min = 7000000, |
| 595 | .lp_clk_max = 10000000, |
| 596 | }; |
| 597 | |
| 598 | r = in->ops.dsi->configure_pins(in, &ddata->pin_config); |
| 599 | if (r) { |
| 600 | dev_err(&ddata->pdev->dev, "failed to configure DSI pins\n"); |
| 601 | goto err0; |
| 602 | }; |
| 603 | |
| 604 | r = in->ops.dsi->set_config(in, &dsi_config); |
| 605 | if (r) { |
| 606 | dev_err(&ddata->pdev->dev, "failed to configure DSI\n"); |
| 607 | goto err0; |
| 608 | } |
| 609 | |
| 610 | r = in->ops.dsi->enable(in); |
| 611 | if (r) { |
| 612 | dev_err(&ddata->pdev->dev, "failed to enable DSI\n"); |
| 613 | goto err0; |
| 614 | } |
| 615 | |
| 616 | dsicm_hw_reset(ddata); |
| 617 | |
| 618 | in->ops.dsi->enable_hs(in, ddata->channel, false); |
| 619 | |
| 620 | r = dsicm_sleep_out(ddata); |
| 621 | if (r) |
| 622 | goto err; |
| 623 | |
| 624 | r = dsicm_get_id(ddata, &id1, &id2, &id3); |
| 625 | if (r) |
| 626 | goto err; |
| 627 | |
| 628 | r = dsicm_dcs_write_1(ddata, DCS_BRIGHTNESS, 0xff); |
| 629 | if (r) |
| 630 | goto err; |
| 631 | |
| 632 | r = dsicm_dcs_write_1(ddata, DCS_CTRL_DISPLAY, |
| 633 | (1<<2) | (1<<5)); /* BL | BCTRL */ |
| 634 | if (r) |
| 635 | goto err; |
| 636 | |
| 637 | r = dsicm_dcs_write_1(ddata, MIPI_DCS_SET_PIXEL_FORMAT, |
| 638 | MIPI_DCS_PIXEL_FMT_24BIT); |
| 639 | if (r) |
| 640 | goto err; |
| 641 | |
| 642 | r = dsicm_dcs_write_0(ddata, MIPI_DCS_SET_DISPLAY_ON); |
| 643 | if (r) |
| 644 | goto err; |
| 645 | |
| 646 | r = _dsicm_enable_te(ddata, ddata->te_enabled); |
| 647 | if (r) |
| 648 | goto err; |
| 649 | |
| 650 | r = in->ops.dsi->enable_video_output(in, ddata->channel); |
| 651 | if (r) |
| 652 | goto err; |
| 653 | |
| 654 | ddata->enabled = 1; |
| 655 | |
| 656 | if (!ddata->intro_printed) { |
| 657 | dev_info(&ddata->pdev->dev, "panel revision %02x.%02x.%02x\n", |
| 658 | id1, id2, id3); |
| 659 | ddata->intro_printed = true; |
| 660 | } |
| 661 | |
| 662 | in->ops.dsi->enable_hs(in, ddata->channel, true); |
| 663 | |
| 664 | return 0; |
| 665 | err: |
| 666 | dev_err(&ddata->pdev->dev, "error while enabling panel, issuing HW reset\n"); |
| 667 | |
| 668 | dsicm_hw_reset(ddata); |
| 669 | |
| 670 | in->ops.dsi->disable(in, true, false); |
| 671 | err0: |
| 672 | return r; |
| 673 | } |
| 674 | |
| 675 | static void dsicm_power_off(struct panel_drv_data *ddata) |
| 676 | { |
| 677 | struct omap_dss_device *in = ddata->in; |
| 678 | int r; |
| 679 | |
| 680 | in->ops.dsi->disable_video_output(in, ddata->channel); |
| 681 | |
| 682 | r = dsicm_dcs_write_0(ddata, MIPI_DCS_SET_DISPLAY_OFF); |
| 683 | if (!r) |
| 684 | r = dsicm_sleep_in(ddata); |
| 685 | |
| 686 | if (r) { |
| 687 | dev_err(&ddata->pdev->dev, |
| 688 | "error disabling panel, issuing HW reset\n"); |
| 689 | dsicm_hw_reset(ddata); |
| 690 | } |
| 691 | |
| 692 | in->ops.dsi->disable(in, true, false); |
| 693 | |
| 694 | ddata->enabled = 0; |
| 695 | } |
| 696 | |
| 697 | static int dsicm_panel_reset(struct panel_drv_data *ddata) |
| 698 | { |
| 699 | dev_err(&ddata->pdev->dev, "performing LCD reset\n"); |
| 700 | |
| 701 | dsicm_power_off(ddata); |
| 702 | dsicm_hw_reset(ddata); |
| 703 | return dsicm_power_on(ddata); |
| 704 | } |
| 705 | |
| 706 | static int dsicm_connect(struct omap_dss_device *dssdev) |
| 707 | { |
| 708 | struct panel_drv_data *ddata = to_panel_data(dssdev); |
| 709 | struct omap_dss_device *in = ddata->in; |
| 710 | struct device *dev = &ddata->pdev->dev; |
| 711 | int r; |
| 712 | |
| 713 | if (omapdss_device_is_connected(dssdev)) |
| 714 | return 0; |
| 715 | |
| 716 | r = in->ops.dsi->connect(in, dssdev); |
| 717 | if (r) { |
| 718 | dev_err(dev, "Failed to connect to video source\n"); |
| 719 | return r; |
| 720 | } |
| 721 | |
| 722 | r = in->ops.dsi->request_vc(ddata->in, &ddata->channel); |
| 723 | if (r) { |
| 724 | dev_err(dev, "failed to get virtual channel\n"); |
| 725 | goto err_req_vc; |
| 726 | } |
| 727 | |
| 728 | r = in->ops.dsi->set_vc_id(ddata->in, ddata->channel, TCH); |
| 729 | if (r) { |
| 730 | dev_err(dev, "failed to set VC_ID\n"); |
| 731 | goto err_vc_id; |
| 732 | } |
| 733 | |
| 734 | return 0; |
| 735 | |
| 736 | err_vc_id: |
| 737 | in->ops.dsi->release_vc(ddata->in, ddata->channel); |
| 738 | err_req_vc: |
| 739 | in->ops.dsi->disconnect(in, dssdev); |
| 740 | return r; |
| 741 | } |
| 742 | |
| 743 | static void dsicm_disconnect(struct omap_dss_device *dssdev) |
| 744 | { |
| 745 | struct panel_drv_data *ddata = to_panel_data(dssdev); |
| 746 | struct omap_dss_device *in = ddata->in; |
| 747 | |
| 748 | if (!omapdss_device_is_connected(dssdev)) |
| 749 | return; |
| 750 | |
| 751 | in->ops.dsi->release_vc(in, ddata->channel); |
| 752 | in->ops.dsi->disconnect(in, dssdev); |
| 753 | } |
| 754 | |
| 755 | static int dsicm_enable(struct omap_dss_device *dssdev) |
| 756 | { |
| 757 | struct panel_drv_data *ddata = to_panel_data(dssdev); |
| 758 | struct omap_dss_device *in = ddata->in; |
| 759 | int r; |
| 760 | |
| 761 | dev_dbg(&ddata->pdev->dev, "enable\n"); |
| 762 | |
| 763 | mutex_lock(&ddata->lock); |
| 764 | |
| 765 | if (!omapdss_device_is_connected(dssdev)) { |
| 766 | r = -ENODEV; |
| 767 | goto err; |
| 768 | } |
| 769 | |
| 770 | if (omapdss_device_is_enabled(dssdev)) { |
| 771 | r = 0; |
| 772 | goto err; |
| 773 | } |
| 774 | |
| 775 | in->ops.dsi->bus_lock(in); |
| 776 | |
| 777 | r = dsicm_power_on(ddata); |
| 778 | |
| 779 | in->ops.dsi->bus_unlock(in); |
| 780 | |
| 781 | if (r) |
| 782 | goto err; |
| 783 | |
| 784 | dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; |
| 785 | |
| 786 | mutex_unlock(&ddata->lock); |
| 787 | |
| 788 | return 0; |
| 789 | err: |
| 790 | dev_dbg(&ddata->pdev->dev, "enable failed\n"); |
| 791 | mutex_unlock(&ddata->lock); |
| 792 | return r; |
| 793 | } |
| 794 | |
| 795 | static void dsicm_disable(struct omap_dss_device *dssdev) |
| 796 | { |
| 797 | struct panel_drv_data *ddata = to_panel_data(dssdev); |
| 798 | struct omap_dss_device *in = ddata->in; |
| 799 | int r; |
| 800 | |
| 801 | dev_dbg(&ddata->pdev->dev, "disable\n"); |
| 802 | |
| 803 | mutex_lock(&ddata->lock); |
| 804 | |
| 805 | dsicm_cancel_ulps_work(ddata); |
| 806 | |
| 807 | in->ops.dsi->bus_lock(in); |
| 808 | |
| 809 | if (omapdss_device_is_enabled(dssdev)) { |
| 810 | r = dsicm_wake_up(ddata); |
| 811 | if (!r) |
| 812 | dsicm_power_off(ddata); |
| 813 | } |
| 814 | |
| 815 | in->ops.dsi->bus_unlock(in); |
| 816 | |
| 817 | dssdev->state = OMAP_DSS_DISPLAY_DISABLED; |
| 818 | |
| 819 | mutex_unlock(&ddata->lock); |
| 820 | } |
| 821 | |
| 822 | static void dsicm_framedone_cb(int err, void *data) |
| 823 | { |
| 824 | struct panel_drv_data *ddata = data; |
| 825 | struct omap_dss_device *in = ddata->in; |
| 826 | |
| 827 | dev_dbg(&ddata->pdev->dev, "framedone, err %d\n", err); |
| 828 | in->ops.dsi->bus_unlock(ddata->in); |
| 829 | } |
| 830 | |
| 831 | static irqreturn_t dsicm_te_isr(int irq, void *data) |
| 832 | { |
| 833 | struct panel_drv_data *ddata = data; |
| 834 | struct omap_dss_device *in = ddata->in; |
| 835 | int old; |
| 836 | int r; |
| 837 | |
| 838 | old = atomic_cmpxchg(&ddata->do_update, 1, 0); |
| 839 | |
| 840 | if (old) { |
| 841 | cancel_delayed_work(&ddata->te_timeout_work); |
| 842 | |
| 843 | r = in->ops.dsi->update(in, ddata->channel, dsicm_framedone_cb, |
| 844 | ddata); |
| 845 | if (r) |
| 846 | goto err; |
| 847 | } |
| 848 | |
| 849 | return IRQ_HANDLED; |
| 850 | err: |
| 851 | dev_err(&ddata->pdev->dev, "start update failed\n"); |
| 852 | in->ops.dsi->bus_unlock(in); |
| 853 | return IRQ_HANDLED; |
| 854 | } |
| 855 | |
| 856 | static void dsicm_te_timeout_work_callback(struct work_struct *work) |
| 857 | { |
| 858 | struct panel_drv_data *ddata = container_of(work, struct panel_drv_data, |
| 859 | te_timeout_work.work); |
| 860 | struct omap_dss_device *in = ddata->in; |
| 861 | |
| 862 | dev_err(&ddata->pdev->dev, "TE not received for 250ms!\n"); |
| 863 | |
| 864 | atomic_set(&ddata->do_update, 0); |
| 865 | in->ops.dsi->bus_unlock(in); |
| 866 | } |
| 867 | |
| 868 | static int dsicm_update(struct omap_dss_device *dssdev, |
| 869 | u16 x, u16 y, u16 w, u16 h) |
| 870 | { |
| 871 | struct panel_drv_data *ddata = to_panel_data(dssdev); |
| 872 | struct omap_dss_device *in = ddata->in; |
| 873 | int r; |
| 874 | |
| 875 | dev_dbg(&ddata->pdev->dev, "update %d, %d, %d x %d\n", x, y, w, h); |
| 876 | |
| 877 | mutex_lock(&ddata->lock); |
| 878 | in->ops.dsi->bus_lock(in); |
| 879 | |
| 880 | r = dsicm_wake_up(ddata); |
| 881 | if (r) |
| 882 | goto err; |
| 883 | |
| 884 | if (!ddata->enabled) { |
| 885 | r = 0; |
| 886 | goto err; |
| 887 | } |
| 888 | |
| 889 | /* XXX no need to send this every frame, but dsi break if not done */ |
| 890 | r = dsicm_set_update_window(ddata, 0, 0, |
| 891 | dssdev->panel.timings.x_res, |
| 892 | dssdev->panel.timings.y_res); |
| 893 | if (r) |
| 894 | goto err; |
| 895 | |
| 896 | if (ddata->te_enabled && gpio_is_valid(ddata->ext_te_gpio)) { |
| 897 | schedule_delayed_work(&ddata->te_timeout_work, |
| 898 | msecs_to_jiffies(250)); |
| 899 | atomic_set(&ddata->do_update, 1); |
| 900 | } else { |
| 901 | r = in->ops.dsi->update(in, ddata->channel, dsicm_framedone_cb, |
| 902 | ddata); |
| 903 | if (r) |
| 904 | goto err; |
| 905 | } |
| 906 | |
| 907 | /* note: no bus_unlock here. unlock is in framedone_cb */ |
| 908 | mutex_unlock(&ddata->lock); |
| 909 | return 0; |
| 910 | err: |
| 911 | in->ops.dsi->bus_unlock(in); |
| 912 | mutex_unlock(&ddata->lock); |
| 913 | return r; |
| 914 | } |
| 915 | |
| 916 | static int dsicm_sync(struct omap_dss_device *dssdev) |
| 917 | { |
| 918 | struct panel_drv_data *ddata = to_panel_data(dssdev); |
| 919 | struct omap_dss_device *in = ddata->in; |
| 920 | |
| 921 | dev_dbg(&ddata->pdev->dev, "sync\n"); |
| 922 | |
| 923 | mutex_lock(&ddata->lock); |
| 924 | in->ops.dsi->bus_lock(in); |
| 925 | in->ops.dsi->bus_unlock(in); |
| 926 | mutex_unlock(&ddata->lock); |
| 927 | |
| 928 | dev_dbg(&ddata->pdev->dev, "sync done\n"); |
| 929 | |
| 930 | return 0; |
| 931 | } |
| 932 | |
| 933 | static int _dsicm_enable_te(struct panel_drv_data *ddata, bool enable) |
| 934 | { |
| 935 | struct omap_dss_device *in = ddata->in; |
| 936 | int r; |
| 937 | |
| 938 | if (enable) |
| 939 | r = dsicm_dcs_write_1(ddata, MIPI_DCS_SET_TEAR_ON, 0); |
| 940 | else |
| 941 | r = dsicm_dcs_write_0(ddata, MIPI_DCS_SET_TEAR_OFF); |
| 942 | |
| 943 | if (!gpio_is_valid(ddata->ext_te_gpio)) |
| 944 | in->ops.dsi->enable_te(in, enable); |
| 945 | |
| 946 | /* possible panel bug */ |
| 947 | msleep(100); |
| 948 | |
| 949 | return r; |
| 950 | } |
| 951 | |
| 952 | static int dsicm_enable_te(struct omap_dss_device *dssdev, bool enable) |
| 953 | { |
| 954 | struct panel_drv_data *ddata = to_panel_data(dssdev); |
| 955 | struct omap_dss_device *in = ddata->in; |
| 956 | int r; |
| 957 | |
| 958 | mutex_lock(&ddata->lock); |
| 959 | |
| 960 | if (ddata->te_enabled == enable) |
| 961 | goto end; |
| 962 | |
| 963 | in->ops.dsi->bus_lock(in); |
| 964 | |
| 965 | if (ddata->enabled) { |
| 966 | r = dsicm_wake_up(ddata); |
| 967 | if (r) |
| 968 | goto err; |
| 969 | |
| 970 | r = _dsicm_enable_te(ddata, enable); |
| 971 | if (r) |
| 972 | goto err; |
| 973 | } |
| 974 | |
| 975 | ddata->te_enabled = enable; |
| 976 | |
| 977 | in->ops.dsi->bus_unlock(in); |
| 978 | end: |
| 979 | mutex_unlock(&ddata->lock); |
| 980 | |
| 981 | return 0; |
| 982 | err: |
| 983 | in->ops.dsi->bus_unlock(in); |
| 984 | mutex_unlock(&ddata->lock); |
| 985 | |
| 986 | return r; |
| 987 | } |
| 988 | |
| 989 | static int dsicm_get_te(struct omap_dss_device *dssdev) |
| 990 | { |
| 991 | struct panel_drv_data *ddata = to_panel_data(dssdev); |
| 992 | int r; |
| 993 | |
| 994 | mutex_lock(&ddata->lock); |
| 995 | r = ddata->te_enabled; |
| 996 | mutex_unlock(&ddata->lock); |
| 997 | |
| 998 | return r; |
| 999 | } |
| 1000 | |
| 1001 | static int dsicm_memory_read(struct omap_dss_device *dssdev, |
| 1002 | void *buf, size_t size, |
| 1003 | u16 x, u16 y, u16 w, u16 h) |
| 1004 | { |
| 1005 | struct panel_drv_data *ddata = to_panel_data(dssdev); |
| 1006 | struct omap_dss_device *in = ddata->in; |
| 1007 | int r; |
| 1008 | int first = 1; |
| 1009 | int plen; |
| 1010 | unsigned buf_used = 0; |
| 1011 | |
| 1012 | if (size < w * h * 3) |
| 1013 | return -ENOMEM; |
| 1014 | |
| 1015 | mutex_lock(&ddata->lock); |
| 1016 | |
| 1017 | if (!ddata->enabled) { |
| 1018 | r = -ENODEV; |
| 1019 | goto err1; |
| 1020 | } |
| 1021 | |
| 1022 | size = min(w * h * 3, |
| 1023 | dssdev->panel.timings.x_res * |
| 1024 | dssdev->panel.timings.y_res * 3); |
| 1025 | |
| 1026 | in->ops.dsi->bus_lock(in); |
| 1027 | |
| 1028 | r = dsicm_wake_up(ddata); |
| 1029 | if (r) |
| 1030 | goto err2; |
| 1031 | |
| 1032 | /* plen 1 or 2 goes into short packet. until checksum error is fixed, |
| 1033 | * use short packets. plen 32 works, but bigger packets seem to cause |
| 1034 | * an error. */ |
| 1035 | if (size % 2) |
| 1036 | plen = 1; |
| 1037 | else |
| 1038 | plen = 2; |
| 1039 | |
| 1040 | dsicm_set_update_window(ddata, x, y, w, h); |
| 1041 | |
| 1042 | r = in->ops.dsi->set_max_rx_packet_size(in, ddata->channel, plen); |
| 1043 | if (r) |
| 1044 | goto err2; |
| 1045 | |
| 1046 | while (buf_used < size) { |
| 1047 | u8 dcs_cmd = first ? 0x2e : 0x3e; |
| 1048 | first = 0; |
| 1049 | |
| 1050 | r = in->ops.dsi->dcs_read(in, ddata->channel, dcs_cmd, |
| 1051 | buf + buf_used, size - buf_used); |
| 1052 | |
| 1053 | if (r < 0) { |
| 1054 | dev_err(dssdev->dev, "read error\n"); |
| 1055 | goto err3; |
| 1056 | } |
| 1057 | |
| 1058 | buf_used += r; |
| 1059 | |
| 1060 | if (r < plen) { |
| 1061 | dev_err(&ddata->pdev->dev, "short read\n"); |
| 1062 | break; |
| 1063 | } |
| 1064 | |
| 1065 | if (signal_pending(current)) { |
| 1066 | dev_err(&ddata->pdev->dev, "signal pending, " |
| 1067 | "aborting memory read\n"); |
| 1068 | r = -ERESTARTSYS; |
| 1069 | goto err3; |
| 1070 | } |
| 1071 | } |
| 1072 | |
| 1073 | r = buf_used; |
| 1074 | |
| 1075 | err3: |
| 1076 | in->ops.dsi->set_max_rx_packet_size(in, ddata->channel, 1); |
| 1077 | err2: |
| 1078 | in->ops.dsi->bus_unlock(in); |
| 1079 | err1: |
| 1080 | mutex_unlock(&ddata->lock); |
| 1081 | return r; |
| 1082 | } |
| 1083 | |
| 1084 | static void dsicm_ulps_work(struct work_struct *work) |
| 1085 | { |
| 1086 | struct panel_drv_data *ddata = container_of(work, struct panel_drv_data, |
| 1087 | ulps_work.work); |
| 1088 | struct omap_dss_device *dssdev = &ddata->dssdev; |
| 1089 | struct omap_dss_device *in = ddata->in; |
| 1090 | |
| 1091 | mutex_lock(&ddata->lock); |
| 1092 | |
| 1093 | if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE || !ddata->enabled) { |
| 1094 | mutex_unlock(&ddata->lock); |
| 1095 | return; |
| 1096 | } |
| 1097 | |
| 1098 | in->ops.dsi->bus_lock(in); |
| 1099 | |
| 1100 | dsicm_enter_ulps(ddata); |
| 1101 | |
| 1102 | in->ops.dsi->bus_unlock(in); |
| 1103 | mutex_unlock(&ddata->lock); |
| 1104 | } |
| 1105 | |
| 1106 | static struct omap_dss_driver dsicm_ops = { |
| 1107 | .connect = dsicm_connect, |
| 1108 | .disconnect = dsicm_disconnect, |
| 1109 | |
| 1110 | .enable = dsicm_enable, |
| 1111 | .disable = dsicm_disable, |
| 1112 | |
| 1113 | .update = dsicm_update, |
| 1114 | .sync = dsicm_sync, |
| 1115 | |
| 1116 | .get_resolution = dsicm_get_resolution, |
| 1117 | .get_recommended_bpp = omapdss_default_get_recommended_bpp, |
| 1118 | |
| 1119 | .enable_te = dsicm_enable_te, |
| 1120 | .get_te = dsicm_get_te, |
| 1121 | |
| 1122 | .memory_read = dsicm_memory_read, |
| 1123 | }; |
| 1124 | |
| 1125 | static int dsicm_probe_pdata(struct platform_device *pdev) |
| 1126 | { |
| 1127 | const struct panel_dsicm_platform_data *pdata; |
| 1128 | struct panel_drv_data *ddata = platform_get_drvdata(pdev); |
| 1129 | struct omap_dss_device *dssdev, *in; |
| 1130 | |
| 1131 | pdata = dev_get_platdata(&pdev->dev); |
| 1132 | |
| 1133 | in = omap_dss_find_output(pdata->source); |
| 1134 | if (in == NULL) { |
| 1135 | dev_err(&pdev->dev, "failed to find video source\n"); |
| 1136 | return -EPROBE_DEFER; |
| 1137 | } |
| 1138 | ddata->in = in; |
| 1139 | |
| 1140 | ddata->reset_gpio = pdata->reset_gpio; |
| 1141 | |
| 1142 | if (pdata->use_ext_te) |
| 1143 | ddata->ext_te_gpio = pdata->ext_te_gpio; |
| 1144 | else |
| 1145 | ddata->ext_te_gpio = -1; |
| 1146 | |
| 1147 | ddata->ulps_timeout = pdata->ulps_timeout; |
| 1148 | |
| 1149 | ddata->use_dsi_backlight = pdata->use_dsi_backlight; |
| 1150 | |
| 1151 | ddata->pin_config = pdata->pin_config; |
| 1152 | |
| 1153 | dssdev = &ddata->dssdev; |
| 1154 | dssdev->name = pdata->name; |
| 1155 | |
| 1156 | return 0; |
| 1157 | } |
| 1158 | |
| 1159 | static int dsicm_probe(struct platform_device *pdev) |
| 1160 | { |
| 1161 | struct backlight_properties props; |
| 1162 | struct panel_drv_data *ddata; |
| 1163 | struct backlight_device *bldev = NULL; |
| 1164 | struct device *dev = &pdev->dev; |
| 1165 | struct omap_dss_device *dssdev; |
| 1166 | int r; |
| 1167 | |
| 1168 | dev_dbg(dev, "probe\n"); |
| 1169 | |
| 1170 | ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL); |
| 1171 | if (!ddata) |
| 1172 | return -ENOMEM; |
| 1173 | |
| 1174 | platform_set_drvdata(pdev, ddata); |
| 1175 | ddata->pdev = pdev; |
| 1176 | |
| 1177 | if (dev_get_platdata(dev)) { |
| 1178 | r = dsicm_probe_pdata(pdev); |
| 1179 | if (r) |
| 1180 | return r; |
| 1181 | } else { |
| 1182 | return -ENODEV; |
| 1183 | } |
| 1184 | |
| 1185 | ddata->timings.x_res = 864; |
| 1186 | ddata->timings.y_res = 480; |
| 1187 | ddata->timings.pixel_clock = DIV_ROUND_UP(864 * 480 * 60, 1000); |
| 1188 | |
| 1189 | dssdev = &ddata->dssdev; |
| 1190 | dssdev->dev = dev; |
| 1191 | dssdev->driver = &dsicm_ops; |
| 1192 | dssdev->panel.timings = ddata->timings; |
| 1193 | dssdev->type = OMAP_DISPLAY_TYPE_DSI; |
| 1194 | dssdev->owner = THIS_MODULE; |
| 1195 | |
| 1196 | dssdev->panel.dsi_pix_fmt = OMAP_DSS_DSI_FMT_RGB888; |
| 1197 | dssdev->caps = OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE | |
| 1198 | OMAP_DSS_DISPLAY_CAP_TEAR_ELIM; |
| 1199 | |
| 1200 | r = omapdss_register_display(dssdev); |
| 1201 | if (r) { |
| 1202 | dev_err(dev, "Failed to register panel\n"); |
| 1203 | goto err_reg; |
| 1204 | } |
| 1205 | |
| 1206 | mutex_init(&ddata->lock); |
| 1207 | |
| 1208 | atomic_set(&ddata->do_update, 0); |
| 1209 | |
| 1210 | if (gpio_is_valid(ddata->reset_gpio)) { |
| 1211 | r = devm_gpio_request_one(dev, ddata->reset_gpio, |
| 1212 | GPIOF_OUT_INIT_LOW, "taal rst"); |
| 1213 | if (r) { |
| 1214 | dev_err(dev, "failed to request reset gpio\n"); |
| 1215 | return r; |
| 1216 | } |
| 1217 | } |
| 1218 | |
| 1219 | if (gpio_is_valid(ddata->ext_te_gpio)) { |
| 1220 | r = devm_gpio_request_one(dev, ddata->ext_te_gpio, |
| 1221 | GPIOF_IN, "taal irq"); |
| 1222 | if (r) { |
| 1223 | dev_err(dev, "GPIO request failed\n"); |
| 1224 | return r; |
| 1225 | } |
| 1226 | |
| 1227 | r = devm_request_irq(dev, gpio_to_irq(ddata->ext_te_gpio), |
| 1228 | dsicm_te_isr, |
| 1229 | IRQF_TRIGGER_RISING, |
| 1230 | "taal vsync", ddata); |
| 1231 | |
| 1232 | if (r) { |
| 1233 | dev_err(dev, "IRQ request failed\n"); |
| 1234 | return r; |
| 1235 | } |
| 1236 | |
| 1237 | INIT_DEFERRABLE_WORK(&ddata->te_timeout_work, |
| 1238 | dsicm_te_timeout_work_callback); |
| 1239 | |
| 1240 | dev_dbg(dev, "Using GPIO TE\n"); |
| 1241 | } |
| 1242 | |
| 1243 | ddata->workqueue = create_singlethread_workqueue("dsicm_wq"); |
| 1244 | if (ddata->workqueue == NULL) { |
| 1245 | dev_err(dev, "can't create workqueue\n"); |
| 1246 | return -ENOMEM; |
| 1247 | } |
| 1248 | INIT_DELAYED_WORK(&ddata->ulps_work, dsicm_ulps_work); |
| 1249 | |
| 1250 | dsicm_hw_reset(ddata); |
| 1251 | |
| 1252 | if (ddata->use_dsi_backlight) { |
| 1253 | memset(&props, 0, sizeof(struct backlight_properties)); |
| 1254 | props.max_brightness = 255; |
| 1255 | |
| 1256 | props.type = BACKLIGHT_RAW; |
| 1257 | bldev = backlight_device_register(dev_name(dev), |
| 1258 | dev, ddata, &dsicm_bl_ops, &props); |
| 1259 | if (IS_ERR(bldev)) { |
| 1260 | r = PTR_ERR(bldev); |
| 1261 | goto err_bl; |
| 1262 | } |
| 1263 | |
| 1264 | ddata->bldev = bldev; |
| 1265 | |
| 1266 | bldev->props.fb_blank = FB_BLANK_UNBLANK; |
| 1267 | bldev->props.power = FB_BLANK_UNBLANK; |
| 1268 | bldev->props.brightness = 255; |
| 1269 | |
| 1270 | dsicm_bl_update_status(bldev); |
| 1271 | } |
| 1272 | |
| 1273 | r = sysfs_create_group(&dev->kobj, &dsicm_attr_group); |
| 1274 | if (r) { |
| 1275 | dev_err(dev, "failed to create sysfs files\n"); |
| 1276 | goto err_sysfs_create; |
| 1277 | } |
| 1278 | |
| 1279 | return 0; |
| 1280 | |
| 1281 | err_sysfs_create: |
| 1282 | if (bldev != NULL) |
| 1283 | backlight_device_unregister(bldev); |
| 1284 | err_bl: |
| 1285 | destroy_workqueue(ddata->workqueue); |
| 1286 | err_reg: |
| 1287 | return r; |
| 1288 | } |
| 1289 | |
| 1290 | static int __exit dsicm_remove(struct platform_device *pdev) |
| 1291 | { |
| 1292 | struct panel_drv_data *ddata = platform_get_drvdata(pdev); |
| 1293 | struct omap_dss_device *dssdev = &ddata->dssdev; |
| 1294 | struct backlight_device *bldev; |
| 1295 | |
| 1296 | dev_dbg(&pdev->dev, "remove\n"); |
| 1297 | |
| 1298 | omapdss_unregister_display(dssdev); |
| 1299 | |
| 1300 | dsicm_disable(dssdev); |
| 1301 | dsicm_disconnect(dssdev); |
| 1302 | |
| 1303 | sysfs_remove_group(&pdev->dev.kobj, &dsicm_attr_group); |
| 1304 | |
| 1305 | bldev = ddata->bldev; |
| 1306 | if (bldev != NULL) { |
| 1307 | bldev->props.power = FB_BLANK_POWERDOWN; |
| 1308 | dsicm_bl_update_status(bldev); |
| 1309 | backlight_device_unregister(bldev); |
| 1310 | } |
| 1311 | |
| 1312 | omap_dss_put_device(ddata->in); |
| 1313 | |
| 1314 | dsicm_cancel_ulps_work(ddata); |
| 1315 | destroy_workqueue(ddata->workqueue); |
| 1316 | |
| 1317 | /* reset, to be sure that the panel is in a valid state */ |
| 1318 | dsicm_hw_reset(ddata); |
| 1319 | |
| 1320 | return 0; |
| 1321 | } |
| 1322 | |
| 1323 | static struct platform_driver dsicm_driver = { |
| 1324 | .probe = dsicm_probe, |
| 1325 | .remove = __exit_p(dsicm_remove), |
| 1326 | .driver = { |
| 1327 | .name = "panel-dsi-cm", |
| 1328 | .owner = THIS_MODULE, |
| 1329 | }, |
| 1330 | }; |
| 1331 | |
| 1332 | module_platform_driver(dsicm_driver); |
| 1333 | |
| 1334 | MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>"); |
| 1335 | MODULE_DESCRIPTION("Generic DSI Command Mode Panel Driver"); |
| 1336 | MODULE_LICENSE("GPL"); |