blob: 83f5f5b365a3fdb5a79e0cf9106697d937994cf4 [file] [log] [blame]
Jonathan Corbet75b02142008-09-30 15:15:56 -060014: GETTING THE CODE RIGHT
2
3While there is much to be said for a solid and community-oriented design
4process, the proof of any kernel development project is in the resulting
5code. It is the code which will be examined by other developers and merged
6(or not) into the mainline tree. So it is the quality of this code which
7will determine the ultimate success of the project.
8
9This section will examine the coding process. We'll start with a look at a
10number of ways in which kernel developers can go wrong. Then the focus
11will shift toward doing things right and the tools which can help in that
12quest.
13
14
154.1: PITFALLS
16
17* Coding style
18
19The kernel has long had a standard coding style, described in
20Documentation/CodingStyle. For much of that time, the policies described
21in that file were taken as being, at most, advisory. As a result, there is
22a substantial amount of code in the kernel which does not meet the coding
23style guidelines. The presence of that code leads to two independent
24hazards for kernel developers.
25
26The first of these is to believe that the kernel coding standards do not
27matter and are not enforced. The truth of the matter is that adding new
28code to the kernel is very difficult if that code is not coded according to
29the standard; many developers will request that the code be reformatted
30before they will even review it. A code base as large as the kernel
31requires some uniformity of code to make it possible for developers to
32quickly understand any part of it. So there is no longer room for
33strangely-formatted code.
34
35Occasionally, the kernel's coding style will run into conflict with an
36employer's mandated style. In such cases, the kernel's style will have to
37win before the code can be merged. Putting code into the kernel means
38giving up a degree of control in a number of ways - including control over
39how the code is formatted.
40
41The other trap is to assume that code which is already in the kernel is
42urgently in need of coding style fixes. Developers may start to generate
43reformatting patches as a way of gaining familiarity with the process, or
44as a way of getting their name into the kernel changelogs - or both. But
45pure coding style fixes are seen as noise by the development community;
46they tend to get a chilly reception. So this type of patch is best
47avoided. It is natural to fix the style of a piece of code while working
48on it for other reasons, but coding style changes should not be made for
49their own sake.
50
51The coding style document also should not be read as an absolute law which
52can never be transgressed. If there is a good reason to go against the
53style (a line which becomes far less readable if split to fit within the
5480-column limit, for example), just do it.
55
56
57* Abstraction layers
58
59Computer Science professors teach students to make extensive use of
60abstraction layers in the name of flexibility and information hiding.
61Certainly the kernel makes extensive use of abstraction; no project
62involving several million lines of code could do otherwise and survive.
63But experience has shown that excessive or premature abstraction can be
64just as harmful as premature optimization. Abstraction should be used to
65the level required and no further.
66
67At a simple level, consider a function which has an argument which is
68always passed as zero by all callers. One could retain that argument just
69in case somebody eventually needs to use the extra flexibility that it
70provides. By that time, though, chances are good that the code which
71implements this extra argument has been broken in some subtle way which was
72never noticed - because it has never been used. Or, when the need for
73extra flexibility arises, it does not do so in a way which matches the
74programmer's early expectation. Kernel developers will routinely submit
75patches to remove unused arguments; they should, in general, not be added
76in the first place.
77
78Abstraction layers which hide access to hardware - often to allow the bulk
79of a driver to be used with multiple operating systems - are especially
80frowned upon. Such layers obscure the code and may impose a performance
81penalty; they do not belong in the Linux kernel.
82
83On the other hand, if you find yourself copying significant amounts of code
84from another kernel subsystem, it is time to ask whether it would, in fact,
85make sense to pull out some of that code into a separate library or to
86implement that functionality at a higher level. There is no value in
87replicating the same code throughout the kernel.
88
89
90* #ifdef and preprocessor use in general
91
92The C preprocessor seems to present a powerful temptation to some C
93programmers, who see it as a way to efficiently encode a great deal of
94flexibility into a source file. But the preprocessor is not C, and heavy
95use of it results in code which is much harder for others to read and
96harder for the compiler to check for correctness. Heavy preprocessor use
97is almost always a sign of code which needs some cleanup work.
98
99Conditional compilation with #ifdef is, indeed, a powerful feature, and it
100is used within the kernel. But there is little desire to see code which is
101sprinkled liberally with #ifdef blocks. As a general rule, #ifdef use
102should be confined to header files whenever possible.
103Conditionally-compiled code can be confined to functions which, if the code
104is not to be present, simply become empty. The compiler will then quietly
105optimize out the call to the empty function. The result is far cleaner
106code which is easier to follow.
107
108C preprocessor macros present a number of hazards, including possible
109multiple evaluation of expressions with side effects and no type safety.
110If you are tempted to define a macro, consider creating an inline function
111instead. The code which results will be the same, but inline functions are
112easier to read, do not evaluate their arguments multiple times, and allow
113the compiler to perform type checking on the arguments and return value.
114
115
116* Inline functions
117
118Inline functions present a hazard of their own, though. Programmers can
119become enamored of the perceived efficiency inherent in avoiding a function
120call and fill a source file with inline functions. Those functions,
121however, can actually reduce performance. Since their code is replicated
122at each call site, they end up bloating the size of the compiled kernel.
123That, in turn, creates pressure on the processor's memory caches, which can
124slow execution dramatically. Inline functions, as a rule, should be quite
125small and relatively rare. The cost of a function call, after all, is not
126that high; the creation of large numbers of inline functions is a classic
127example of premature optimization.
128
129In general, kernel programmers ignore cache effects at their peril. The
130classic time/space tradeoff taught in beginning data structures classes
131often does not apply to contemporary hardware. Space *is* time, in that a
132larger program will run slower than one which is more compact.
133
Jonathan Corbet5c050fb2011-03-25 12:17:53 -0600134More recent compilers take an increasingly active role in deciding whether
135a given function should actually be inlined or not. So the liberal
136placement of "inline" keywords may not just be excessive; it could also be
137irrelevant.
138
Jonathan Corbet75b02142008-09-30 15:15:56 -0600139
140* Locking
141
142In May, 2006, the "Devicescape" networking stack was, with great
143fanfare, released under the GPL and made available for inclusion in the
144mainline kernel. This donation was welcome news; support for wireless
145networking in Linux was considered substandard at best, and the Devicescape
146stack offered the promise of fixing that situation. Yet, this code did not
147actually make it into the mainline until June, 2007 (2.6.22). What
148happened?
149
150This code showed a number of signs of having been developed behind
151corporate doors. But one large problem in particular was that it was not
152designed to work on multiprocessor systems. Before this networking stack
153(now called mac80211) could be merged, a locking scheme needed to be
154retrofitted onto it.
155
156Once upon a time, Linux kernel code could be developed without thinking
157about the concurrency issues presented by multiprocessor systems. Now,
158however, this document is being written on a dual-core laptop. Even on
159single-processor systems, work being done to improve responsiveness will
160raise the level of concurrency within the kernel. The days when kernel
161code could be written without thinking about locking are long past.
162
163Any resource (data structures, hardware registers, etc.) which could be
164accessed concurrently by more than one thread must be protected by a lock.
165New code should be written with this requirement in mind; retrofitting
166locking after the fact is a rather more difficult task. Kernel developers
167should take the time to understand the available locking primitives well
168enough to pick the right tool for the job. Code which shows a lack of
169attention to concurrency will have a difficult path into the mainline.
170
171
172* Regressions
173
174One final hazard worth mentioning is this: it can be tempting to make a
175change (which may bring big improvements) which causes something to break
176for existing users. This kind of change is called a "regression," and
177regressions have become most unwelcome in the mainline kernel. With few
178exceptions, changes which cause regressions will be backed out if the
179regression cannot be fixed in a timely manner. Far better to avoid the
180regression in the first place.
181
182It is often argued that a regression can be justified if it causes things
183to work for more people than it creates problems for. Why not make a
184change if it brings new functionality to ten systems for each one it
185breaks? The best answer to this question was expressed by Linus in July,
1862007:
187
188 So we don't fix bugs by introducing new problems. That way lies
189 madness, and nobody ever knows if you actually make any real
190 progress at all. Is it two steps forwards, one step back, or one
191 step forward and two steps back?
192
193(http://lwn.net/Articles/243460/).
194
195An especially unwelcome type of regression is any sort of change to the
196user-space ABI. Once an interface has been exported to user space, it must
197be supported indefinitely. This fact makes the creation of user-space
198interfaces particularly challenging: since they cannot be changed in
199incompatible ways, they must be done right the first time. For this
200reason, a great deal of thought, clear documentation, and wide review for
201user-space interfaces is always required.
202
203
204
2054.2: CODE CHECKING TOOLS
206
207For now, at least, the writing of error-free code remains an ideal that few
208of us can reach. What we can hope to do, though, is to catch and fix as
209many of those errors as possible before our code goes into the mainline
210kernel. To that end, the kernel developers have put together an impressive
211array of tools which can catch a wide variety of obscure problems in an
212automated way. Any problem caught by the computer is a problem which will
213not afflict a user later on, so it stands to reason that the automated
214tools should be used whenever possible.
215
216The first step is simply to heed the warnings produced by the compiler.
217Contemporary versions of gcc can detect (and warn about) a large number of
218potential errors. Quite often, these warnings point to real problems.
219Code submitted for review should, as a rule, not produce any compiler
220warnings. When silencing warnings, take care to understand the real cause
221and try to avoid "fixes" which make the warning go away without addressing
222its cause.
223
224Note that not all compiler warnings are enabled by default. Build the
225kernel with "make EXTRA_CFLAGS=-W" to get the full set.
226
227The kernel provides several configuration options which turn on debugging
228features; most of these are found in the "kernel hacking" submenu. Several
229of these options should be turned on for any kernel used for development or
230testing purposes. In particular, you should turn on:
231
232 - ENABLE_WARN_DEPRECATED, ENABLE_MUST_CHECK, and FRAME_WARN to get an
233 extra set of warnings for problems like the use of deprecated interfaces
234 or ignoring an important return value from a function. The output
235 generated by these warnings can be verbose, but one need not worry about
236 warnings from other parts of the kernel.
237
238 - DEBUG_OBJECTS will add code to track the lifetime of various objects
239 created by the kernel and warn when things are done out of order. If
240 you are adding a subsystem which creates (and exports) complex objects
241 of its own, consider adding support for the object debugging
242 infrastructure.
243
244 - DEBUG_SLAB can find a variety of memory allocation and use errors; it
245 should be used on most development kernels.
246
Frederic Weisbeckerd902db12011-06-08 19:31:56 +0200247 - DEBUG_SPINLOCK, DEBUG_ATOMIC_SLEEP, and DEBUG_MUTEXES will find a
Jonathan Corbet75b02142008-09-30 15:15:56 -0600248 number of common locking errors.
249
250There are quite a few other debugging options, some of which will be
251discussed below. Some of them have a significant performance impact and
252should not be used all of the time. But some time spent learning the
253available options will likely be paid back many times over in short order.
254
255One of the heavier debugging tools is the locking checker, or "lockdep."
256This tool will track the acquisition and release of every lock (spinlock or
257mutex) in the system, the order in which locks are acquired relative to
258each other, the current interrupt environment, and more. It can then
259ensure that locks are always acquired in the same order, that the same
260interrupt assumptions apply in all situations, and so on. In other words,
261lockdep can find a number of scenarios in which the system could, on rare
262occasion, deadlock. This kind of problem can be painful (for both
263developers and users) in a deployed system; lockdep allows them to be found
264in an automated manner ahead of time. Code with any sort of non-trivial
265locking should be run with lockdep enabled before being submitted for
266inclusion.
267
268As a diligent kernel programmer, you will, beyond doubt, check the return
269status of any operation (such as a memory allocation) which can fail. The
270fact of the matter, though, is that the resulting failure recovery paths
271are, probably, completely untested. Untested code tends to be broken code;
272you could be much more confident of your code if all those error-handling
273paths had been exercised a few times.
274
275The kernel provides a fault injection framework which can do exactly that,
276especially where memory allocations are involved. With fault injection
277enabled, a configurable percentage of memory allocations will be made to
278fail; these failures can be restricted to a specific range of code.
279Running with fault injection enabled allows the programmer to see how the
280code responds when things go badly. See
281Documentation/fault-injection/fault-injection.text for more information on
282how to use this facility.
283
284Other kinds of errors can be found with the "sparse" static analysis tool.
285With sparse, the programmer can be warned about confusion between
286user-space and kernel-space addresses, mixture of big-endian and
287small-endian quantities, the passing of integer values where a set of bit
288flags is expected, and so on. Sparse must be installed separately (it can
Justin P. Mattock0ea6e612010-07-23 20:51:24 -0700289be found at https://sparse.wiki.kernel.org/index.php/Main_Page if your
Jonathan Corbet75b02142008-09-30 15:15:56 -0600290distributor does not package it); it can then be run on the code by adding
291"C=1" to your make command.
292
Jonathan Corbet5c050fb2011-03-25 12:17:53 -0600293The "Coccinelle" tool (http://coccinelle.lip6.fr/) is able to find a wide
294variety of potential coding problems; it can also propose fixes for those
295problems. Quite a few "semantic patches" for the kernel have been packaged
296under the scripts/coccinelle directory; running "make coccicheck" will run
297through those semantic patches and report on any problems found. See
298Documentation/coccinelle.txt for more information.
299
Jonathan Corbet75b02142008-09-30 15:15:56 -0600300Other kinds of portability errors are best found by compiling your code for
301other architectures. If you do not happen to have an S/390 system or a
302Blackfin development board handy, you can still perform the compilation
303step. A large set of cross compilers for x86 systems can be found at
304
305 http://www.kernel.org/pub/tools/crosstool/
306
307Some time spent installing and using these compilers will help avoid
308embarrassment later.
309
310
3114.3: DOCUMENTATION
312
313Documentation has often been more the exception than the rule with kernel
314development. Even so, adequate documentation will help to ease the merging
315of new code into the kernel, make life easier for other developers, and
316will be helpful for your users. In many cases, the addition of
317documentation has become essentially mandatory.
318
319The first piece of documentation for any patch is its associated
320changelog. Log entries should describe the problem being solved, the form
321of the solution, the people who worked on the patch, any relevant
322effects on performance, and anything else that might be needed to
Jonathan Corbet5c050fb2011-03-25 12:17:53 -0600323understand the patch. Be sure that the changelog says *why* the patch is
324worth applying; a surprising number of developers fail to provide that
325information.
Jonathan Corbet75b02142008-09-30 15:15:56 -0600326
327Any code which adds a new user-space interface - including new sysfs or
328/proc files - should include documentation of that interface which enables
329user-space developers to know what they are working with. See
330Documentation/ABI/README for a description of how this documentation should
331be formatted and what information needs to be provided.
332
333The file Documentation/kernel-parameters.txt describes all of the kernel's
334boot-time parameters. Any patch which adds new parameters should add the
335appropriate entries to this file.
336
337Any new configuration options must be accompanied by help text which
Jonathan Corbet5c050fb2011-03-25 12:17:53 -0600338clearly explains the options and when the user might want to select them.
Jonathan Corbet75b02142008-09-30 15:15:56 -0600339
340Internal API information for many subsystems is documented by way of
341specially-formatted comments; these comments can be extracted and formatted
342in a number of ways by the "kernel-doc" script. If you are working within
343a subsystem which has kerneldoc comments, you should maintain them and add
344them, as appropriate, for externally-available functions. Even in areas
345which have not been so documented, there is no harm in adding kerneldoc
346comments for the future; indeed, this can be a useful activity for
347beginning kernel developers. The format of these comments, along with some
348information on how to create kerneldoc templates can be found in the file
349Documentation/kernel-doc-nano-HOWTO.txt.
350
351Anybody who reads through a significant amount of existing kernel code will
352note that, often, comments are most notable by their absence. Once again,
353the expectations for new code are higher than they were in the past;
354merging uncommented code will be harder. That said, there is little desire
355for verbosely-commented code. The code should, itself, be readable, with
356comments explaining the more subtle aspects.
357
358Certain things should always be commented. Uses of memory barriers should
359be accompanied by a line explaining why the barrier is necessary. The
360locking rules for data structures generally need to be explained somewhere.
361Major data structures need comprehensive documentation in general.
362Non-obvious dependencies between separate bits of code should be pointed
363out. Anything which might tempt a code janitor to make an incorrect
364"cleanup" needs a comment saying why it is done the way it is. And so on.
365
366
3674.4: INTERNAL API CHANGES
368
369The binary interface provided by the kernel to user space cannot be broken
370except under the most severe circumstances. The kernel's internal
371programming interfaces, instead, are highly fluid and can be changed when
372the need arises. If you find yourself having to work around a kernel API,
373or simply not using a specific functionality because it does not meet your
374needs, that may be a sign that the API needs to change. As a kernel
375developer, you are empowered to make such changes.
376
377There are, of course, some catches. API changes can be made, but they need
378to be well justified. So any patch making an internal API change should be
379accompanied by a description of what the change is and why it is
380necessary. This kind of change should also be broken out into a separate
381patch, rather than buried within a larger patch.
382
383The other catch is that a developer who changes an internal API is
384generally charged with the task of fixing any code within the kernel tree
385which is broken by the change. For a widely-used function, this duty can
386lead to literally hundreds or thousands of changes - many of which are
387likely to conflict with work being done by other developers. Needless to
388say, this can be a large job, so it is best to be sure that the
Jonathan Corbet5c050fb2011-03-25 12:17:53 -0600389justification is solid. Note that the Coccinelle tool can help with
390wide-ranging API changes.
Jonathan Corbet75b02142008-09-30 15:15:56 -0600391
392When making an incompatible API change, one should, whenever possible,
Jonathan Corbetd5b52432009-01-08 16:32:13 -0700393ensure that code which has not been updated is caught by the compiler.
Jonathan Corbet75b02142008-09-30 15:15:56 -0600394This will help you to be sure that you have found all in-tree uses of that
395interface. It will also alert developers of out-of-tree code that there is
396a change that they need to respond to. Supporting out-of-tree code is not
397something that kernel developers need to be worried about, but we also do
Jonathan Corbetd5b52432009-01-08 16:32:13 -0700398not have to make life harder for out-of-tree developers than it needs to
399be.