blob: b9348610782181429e24bc682627612d1bae7184 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * Copyright (C) 2001 - 2003 Sistina Software (UK) Limited.
3 * Copyright (C) 2004 - 2005 Red Hat, Inc. All rights reserved.
4 *
5 * This file is released under the LGPL.
6 */
7
8#ifndef _LINUX_DM_IOCTL_V4_H
9#define _LINUX_DM_IOCTL_V4_H
10
11#include <linux/types.h>
12
13#define DM_DIR "mapper" /* Slashes not supported */
14#define DM_MAX_TYPE_NAME 16
15#define DM_NAME_LEN 128
16#define DM_UUID_LEN 129
17
18/*
19 * A traditional ioctl interface for the device mapper.
20 *
21 * Each device can have two tables associated with it, an
22 * 'active' table which is the one currently used by io passing
23 * through the device, and an 'inactive' one which is a table
24 * that is being prepared as a replacement for the 'active' one.
25 *
26 * DM_VERSION:
27 * Just get the version information for the ioctl interface.
28 *
29 * DM_REMOVE_ALL:
30 * Remove all dm devices, destroy all tables. Only really used
31 * for debug.
32 *
33 * DM_LIST_DEVICES:
34 * Get a list of all the dm device names.
35 *
36 * DM_DEV_CREATE:
37 * Create a new device, neither the 'active' or 'inactive' table
38 * slots will be filled. The device will be in suspended state
39 * after creation, however any io to the device will get errored
40 * since it will be out-of-bounds.
41 *
42 * DM_DEV_REMOVE:
43 * Remove a device, destroy any tables.
44 *
45 * DM_DEV_RENAME:
46 * Rename a device.
47 *
48 * DM_SUSPEND:
49 * This performs both suspend and resume, depending which flag is
50 * passed in.
51 * Suspend: This command will not return until all pending io to
52 * the device has completed. Further io will be deferred until
53 * the device is resumed.
54 * Resume: It is no longer an error to issue this command on an
55 * unsuspended device. If a table is present in the 'inactive'
56 * slot, it will be moved to the active slot, then the old table
57 * from the active slot will be _destroyed_. Finally the device
58 * is resumed.
59 *
60 * DM_DEV_STATUS:
61 * Retrieves the status for the table in the 'active' slot.
62 *
63 * DM_DEV_WAIT:
64 * Wait for a significant event to occur to the device. This
65 * could either be caused by an event triggered by one of the
66 * targets of the table in the 'active' slot, or a table change.
67 *
68 * DM_TABLE_LOAD:
69 * Load a table into the 'inactive' slot for the device. The
70 * device does _not_ need to be suspended prior to this command.
71 *
72 * DM_TABLE_CLEAR:
73 * Destroy any table in the 'inactive' slot (ie. abort).
74 *
75 * DM_TABLE_DEPS:
76 * Return a set of device dependencies for the 'active' table.
77 *
78 * DM_TABLE_STATUS:
79 * Return the targets status for the 'active' table.
80 *
81 * DM_TARGET_MSG:
82 * Pass a message string to the target at a specific offset of a device.
Darrick J. Wong3ac51e72006-03-27 01:17:54 -080083 *
84 * DM_DEV_SET_GEOMETRY:
85 * Set the geometry of a device by passing in a string in this format:
86 *
87 * "cylinders heads sectors_per_track start_sector"
88 *
89 * Beware that CHS geometry is nearly obsolete and only provided
90 * for compatibility with dm devices that can be booted by a PC
91 * BIOS. See struct hd_geometry for range limits. Also note that
92 * the geometry is erased if the device size changes.
Linus Torvalds1da177e2005-04-16 15:20:36 -070093 */
94
95/*
96 * All ioctl arguments consist of a single chunk of memory, with
97 * this structure at the start. If a uuid is specified any
98 * lookup (eg. for a DM_INFO) will be done on that, *not* the
99 * name.
100 */
101struct dm_ioctl {
102 /*
103 * The version number is made up of three parts:
104 * major - no backward or forward compatibility,
105 * minor - only backwards compatible,
106 * patch - both backwards and forwards compatible.
107 *
108 * All clients of the ioctl interface should fill in the
109 * version number of the interface that they were
110 * compiled with.
111 *
112 * All recognised ioctl commands (ie. those that don't
113 * return -ENOTTY) fill out this field, even if the
114 * command failed.
115 */
116 uint32_t version[3]; /* in/out */
117 uint32_t data_size; /* total size of data passed in
118 * including this struct */
119
120 uint32_t data_start; /* offset to start of data
121 * relative to start of this struct */
122
123 uint32_t target_count; /* in/out */
124 int32_t open_count; /* out */
125 uint32_t flags; /* in/out */
126 uint32_t event_nr; /* in/out */
127 uint32_t padding;
128
129 uint64_t dev; /* in/out */
130
131 char name[DM_NAME_LEN]; /* device name */
132 char uuid[DM_UUID_LEN]; /* unique identifier for
133 * the block device */
134};
135
136/*
137 * Used to specify tables. These structures appear after the
138 * dm_ioctl.
139 */
140struct dm_target_spec {
141 uint64_t sector_start;
142 uint64_t length;
143 int32_t status; /* used when reading from kernel only */
144
145 /*
146 * Location of the next dm_target_spec.
147 * - When specifying targets on a DM_TABLE_LOAD command, this value is
148 * the number of bytes from the start of the "current" dm_target_spec
149 * to the start of the "next" dm_target_spec.
150 * - When retrieving targets on a DM_TABLE_STATUS command, this value
151 * is the number of bytes from the start of the first dm_target_spec
152 * (that follows the dm_ioctl struct) to the start of the "next"
153 * dm_target_spec.
154 */
155 uint32_t next;
156
157 char target_type[DM_MAX_TYPE_NAME];
158
159 /*
160 * Parameter string starts immediately after this object.
161 * Be careful to add padding after string to ensure correct
162 * alignment of subsequent dm_target_spec.
163 */
164};
165
166/*
167 * Used to retrieve the target dependencies.
168 */
169struct dm_target_deps {
170 uint32_t count; /* Array size */
171 uint32_t padding; /* unused */
172 uint64_t dev[0]; /* out */
173};
174
175/*
176 * Used to get a list of all dm devices.
177 */
178struct dm_name_list {
179 uint64_t dev;
180 uint32_t next; /* offset to the next record from
181 the _start_ of this */
182 char name[0];
183};
184
185/*
186 * Used to retrieve the target versions
187 */
188struct dm_target_versions {
189 uint32_t next;
190 uint32_t version[3];
191
192 char name[0];
193};
194
195/*
196 * Used to pass message to a target
197 */
198struct dm_target_msg {
199 uint64_t sector; /* Device sector */
200
201 char message[0];
202};
203
204/*
205 * If you change this make sure you make the corresponding change
206 * to dm-ioctl.c:lookup_ioctl()
207 */
208enum {
209 /* Top level cmds */
210 DM_VERSION_CMD = 0,
211 DM_REMOVE_ALL_CMD,
212 DM_LIST_DEVICES_CMD,
213
214 /* device level cmds */
215 DM_DEV_CREATE_CMD,
216 DM_DEV_REMOVE_CMD,
217 DM_DEV_RENAME_CMD,
218 DM_DEV_SUSPEND_CMD,
219 DM_DEV_STATUS_CMD,
220 DM_DEV_WAIT_CMD,
221
222 /* Table level cmds */
223 DM_TABLE_LOAD_CMD,
224 DM_TABLE_CLEAR_CMD,
225 DM_TABLE_DEPS_CMD,
226 DM_TABLE_STATUS_CMD,
227
228 /* Added later */
229 DM_LIST_VERSIONS_CMD,
230 DM_TARGET_MSG_CMD,
Darrick J. Wong3ac51e72006-03-27 01:17:54 -0800231 DM_DEV_SET_GEOMETRY_CMD
Linus Torvalds1da177e2005-04-16 15:20:36 -0700232};
233
234/*
235 * The dm_ioctl struct passed into the ioctl is just the header
236 * on a larger chunk of memory. On x86-64 and other
237 * architectures the dm-ioctl struct will be padded to an 8 byte
238 * boundary so the size will be different, which would change the
239 * ioctl code - yes I really messed up. This hack forces these
240 * architectures to have the correct ioctl code.
241 */
242#ifdef CONFIG_COMPAT
243typedef char ioctl_struct[308];
244#define DM_VERSION_32 _IOWR(DM_IOCTL, DM_VERSION_CMD, ioctl_struct)
245#define DM_REMOVE_ALL_32 _IOWR(DM_IOCTL, DM_REMOVE_ALL_CMD, ioctl_struct)
246#define DM_LIST_DEVICES_32 _IOWR(DM_IOCTL, DM_LIST_DEVICES_CMD, ioctl_struct)
247
248#define DM_DEV_CREATE_32 _IOWR(DM_IOCTL, DM_DEV_CREATE_CMD, ioctl_struct)
249#define DM_DEV_REMOVE_32 _IOWR(DM_IOCTL, DM_DEV_REMOVE_CMD, ioctl_struct)
250#define DM_DEV_RENAME_32 _IOWR(DM_IOCTL, DM_DEV_RENAME_CMD, ioctl_struct)
251#define DM_DEV_SUSPEND_32 _IOWR(DM_IOCTL, DM_DEV_SUSPEND_CMD, ioctl_struct)
252#define DM_DEV_STATUS_32 _IOWR(DM_IOCTL, DM_DEV_STATUS_CMD, ioctl_struct)
253#define DM_DEV_WAIT_32 _IOWR(DM_IOCTL, DM_DEV_WAIT_CMD, ioctl_struct)
254
255#define DM_TABLE_LOAD_32 _IOWR(DM_IOCTL, DM_TABLE_LOAD_CMD, ioctl_struct)
256#define DM_TABLE_CLEAR_32 _IOWR(DM_IOCTL, DM_TABLE_CLEAR_CMD, ioctl_struct)
257#define DM_TABLE_DEPS_32 _IOWR(DM_IOCTL, DM_TABLE_DEPS_CMD, ioctl_struct)
258#define DM_TABLE_STATUS_32 _IOWR(DM_IOCTL, DM_TABLE_STATUS_CMD, ioctl_struct)
259#define DM_LIST_VERSIONS_32 _IOWR(DM_IOCTL, DM_LIST_VERSIONS_CMD, ioctl_struct)
260#define DM_TARGET_MSG_32 _IOWR(DM_IOCTL, DM_TARGET_MSG_CMD, ioctl_struct)
Darrick J. Wong3ac51e72006-03-27 01:17:54 -0800261#define DM_DEV_SET_GEOMETRY_32 _IOWR(DM_IOCTL, DM_DEV_SET_GEOMETRY_CMD, ioctl_struct)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700262#endif
263
264#define DM_IOCTL 0xfd
265
266#define DM_VERSION _IOWR(DM_IOCTL, DM_VERSION_CMD, struct dm_ioctl)
267#define DM_REMOVE_ALL _IOWR(DM_IOCTL, DM_REMOVE_ALL_CMD, struct dm_ioctl)
268#define DM_LIST_DEVICES _IOWR(DM_IOCTL, DM_LIST_DEVICES_CMD, struct dm_ioctl)
269
270#define DM_DEV_CREATE _IOWR(DM_IOCTL, DM_DEV_CREATE_CMD, struct dm_ioctl)
271#define DM_DEV_REMOVE _IOWR(DM_IOCTL, DM_DEV_REMOVE_CMD, struct dm_ioctl)
272#define DM_DEV_RENAME _IOWR(DM_IOCTL, DM_DEV_RENAME_CMD, struct dm_ioctl)
273#define DM_DEV_SUSPEND _IOWR(DM_IOCTL, DM_DEV_SUSPEND_CMD, struct dm_ioctl)
274#define DM_DEV_STATUS _IOWR(DM_IOCTL, DM_DEV_STATUS_CMD, struct dm_ioctl)
275#define DM_DEV_WAIT _IOWR(DM_IOCTL, DM_DEV_WAIT_CMD, struct dm_ioctl)
276
277#define DM_TABLE_LOAD _IOWR(DM_IOCTL, DM_TABLE_LOAD_CMD, struct dm_ioctl)
278#define DM_TABLE_CLEAR _IOWR(DM_IOCTL, DM_TABLE_CLEAR_CMD, struct dm_ioctl)
279#define DM_TABLE_DEPS _IOWR(DM_IOCTL, DM_TABLE_DEPS_CMD, struct dm_ioctl)
280#define DM_TABLE_STATUS _IOWR(DM_IOCTL, DM_TABLE_STATUS_CMD, struct dm_ioctl)
281
282#define DM_LIST_VERSIONS _IOWR(DM_IOCTL, DM_LIST_VERSIONS_CMD, struct dm_ioctl)
283
284#define DM_TARGET_MSG _IOWR(DM_IOCTL, DM_TARGET_MSG_CMD, struct dm_ioctl)
Darrick J. Wong3ac51e72006-03-27 01:17:54 -0800285#define DM_DEV_SET_GEOMETRY _IOWR(DM_IOCTL, DM_DEV_SET_GEOMETRY_CMD, struct dm_ioctl)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700286
287#define DM_VERSION_MAJOR 4
Kiyoshi Ueda81fdb092006-12-08 02:41:07 -0800288#define DM_VERSION_MINOR 11
Linus Torvalds1da177e2005-04-16 15:20:36 -0700289#define DM_VERSION_PATCHLEVEL 0
Kiyoshi Ueda81fdb092006-12-08 02:41:07 -0800290#define DM_VERSION_EXTRA "-ioctl (2006-10-12)"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700291
292/* Status bits */
293#define DM_READONLY_FLAG (1 << 0) /* In/Out */
294#define DM_SUSPEND_FLAG (1 << 1) /* In/Out */
295#define DM_PERSISTENT_DEV_FLAG (1 << 3) /* In */
296
297/*
298 * Flag passed into ioctl STATUS command to get table information
299 * rather than current status.
300 */
301#define DM_STATUS_TABLE_FLAG (1 << 4) /* In */
302
303/*
304 * Flags that indicate whether a table is present in either of
305 * the two table slots that a device has.
306 */
307#define DM_ACTIVE_PRESENT_FLAG (1 << 5) /* Out */
308#define DM_INACTIVE_PRESENT_FLAG (1 << 6) /* Out */
309
310/*
311 * Indicates that the buffer passed in wasn't big enough for the
312 * results.
313 */
314#define DM_BUFFER_FULL_FLAG (1 << 8) /* Out */
315
316/*
Alasdair G Kergon5c6bd752006-06-26 00:27:34 -0700317 * This flag is now ignored.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700318 */
319#define DM_SKIP_BDGET_FLAG (1 << 9) /* In */
320
Alasdair G Kergon6da487d2006-01-06 00:20:07 -0800321/*
322 * Set this to avoid attempting to freeze any filesystem when suspending.
323 */
324#define DM_SKIP_LOCKFS_FLAG (1 << 10) /* In */
325
Kiyoshi Ueda81fdb092006-12-08 02:41:07 -0800326/*
327 * Set this to suspend without flushing queued ios.
328 */
329#define DM_NOFLUSH_FLAG (1 << 11) /* In */
330
Linus Torvalds1da177e2005-04-16 15:20:36 -0700331#endif /* _LINUX_DM_IOCTL_H */