arch/arm/mach-at91/board.h

/*
 * arch/arm/mach-at91/include/mach/board.h
 *
 *  Copyright (C) 2005 HP Labs
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */

/*
 * These are data structures found in platform_device.dev.platform_data,
 * and describing board-specific data needed by drivers.  For example,
 * which pin is used for a given GPIO role.
 *
 * In 2.6, drivers should strongly avoid board-specific knowledge so
 * that supporting new boards normally won't require driver patches.
 * Most board-specific knowledge should be in arch/.../board-*.c files.
 */

#ifndef __ASM_ARCH_BOARD_H
#define __ASM_ARCH_BOARD_H

#include <linux/platform_data/atmel.h>

 /* USB Device */
extern void __init at91_add_device_udc(struct at91_udc_data *data);

 /* USB High Speed Device */
extern void __init at91_add_device_usba(struct usba_platform_data *data);

 /* Compact Flash */
extern void __init at91_add_device_cf(struct at91_cf_data *data);

 /* MMC / SD */
  /* atmel-mci platform config */
extern void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data);

extern void __init at91_add_device_eth(struct macb_platform_data *data);

 /* USB Host */
extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
extern void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data);
extern void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data);

extern void __init at91_add_device_nand(struct atmel_nand_data *data);

 /* I2C*/
extern void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices);

 /* SPI */
extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices);

 /* Serial */
#define ATMEL_UART_CTS	0x01
#define ATMEL_UART_RTS	0x02
#define ATMEL_UART_DSR	0x04
#define ATMEL_UART_DTR	0x08
#define ATMEL_UART_DCD	0x10
#define ATMEL_UART_RI	0x20

extern void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins);

extern struct platform_device *atmel_default_console_device;

extern void __init at91_add_device_serial(void);

/*
 * PWM
 */
#define AT91_PWM0	0
#define AT91_PWM1	1
#define AT91_PWM2	2
#define AT91_PWM3	3

extern void __init at91_add_device_pwm(u32 mask);

/*
 * SSC -- accessed through ssc_request(id).  Drivers don't bind to SSC
 * platform devices.  Their SSC ID is part of their configuration data,
 * along with information about which SSC signals they should use.
 */
#define ATMEL_SSC_TK	0x01
#define ATMEL_SSC_TF	0x02
#define ATMEL_SSC_TD	0x04
#define ATMEL_SSC_TX	(ATMEL_SSC_TK | ATMEL_SSC_TF | ATMEL_SSC_TD)

#define ATMEL_SSC_RK	0x10
#define ATMEL_SSC_RF	0x20
#define ATMEL_SSC_RD	0x40
#define ATMEL_SSC_RX	(ATMEL_SSC_RK | ATMEL_SSC_RF | ATMEL_SSC_RD)

extern void __init at91_add_device_ssc(unsigned id, unsigned pins);

 /* LCD Controller */
struct atmel_lcdfb_pdata;
extern void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data);

 /* AC97 */
extern void __init at91_add_device_ac97(struct ac97c_platform_data *data);

 /* ISI */
struct isi_platform_data;
extern void __init at91_add_device_isi(struct isi_platform_data *data,
		bool use_pck_as_mck);

/* CAN */
extern void __init at91_add_device_can(struct at91_can_data *data);

#endif