blob: ee16f0c5c47d06acb040561859e4fe62e1ed0111 [file] [log] [blame]
Alok Kataria851b1642009-10-13 14:51:05 -07001/*
2 * VMware PVSCSI header file
3 *
Arvind Kumara2713cc2014-03-08 12:51:12 -08004 * Copyright (C) 2008-2014, VMware, Inc. All Rights Reserved.
Alok Kataria851b1642009-10-13 14:51:05 -07005 *
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License as published by the
8 * Free Software Foundation; version 2 of the License and no later version.
9 *
10 * This program is distributed in the hope that it will be useful, but
11 * WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
13 * NON INFRINGEMENT. See the GNU General Public License for more
14 * details.
15 *
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
19 *
Arvind Kumara9310732012-03-08 15:48:53 +053020 * Maintained by: Arvind Kumar <arvindkumar@vmware.com>
Alok Kataria851b1642009-10-13 14:51:05 -070021 *
22 */
23
24#ifndef _VMW_PVSCSI_H_
25#define _VMW_PVSCSI_H_
26
27#include <linux/types.h>
28
Arvind Kumar02845562014-03-08 13:04:45 -080029#define PVSCSI_DRIVER_VERSION_STRING "1.0.5.0-k"
Alok Kataria851b1642009-10-13 14:51:05 -070030
31#define PVSCSI_MAX_NUM_SG_ENTRIES_PER_SEGMENT 128
32
33#define MASK(n) ((1 << (n)) - 1) /* make an n-bit mask */
34
Alok Kataria851b1642009-10-13 14:51:05 -070035#define PCI_DEVICE_ID_VMWARE_PVSCSI 0x07C0
36
37/*
38 * host adapter status/error codes
39 */
40enum HostBusAdapterStatus {
Arvind Kumara9310732012-03-08 15:48:53 +053041 BTSTAT_SUCCESS = 0x00, /* CCB complete normally with no errors */
42 BTSTAT_LINKED_COMMAND_COMPLETED = 0x0a,
43 BTSTAT_LINKED_COMMAND_COMPLETED_WITH_FLAG = 0x0b,
44 BTSTAT_DATA_UNDERRUN = 0x0c,
45 BTSTAT_SELTIMEO = 0x11, /* SCSI selection timeout */
46 BTSTAT_DATARUN = 0x12, /* data overrun/underrun */
47 BTSTAT_BUSFREE = 0x13, /* unexpected bus free */
48 BTSTAT_INVPHASE = 0x14, /* invalid bus phase or sequence
49 * requested by target */
50 BTSTAT_LUNMISMATCH = 0x17, /* linked CCB has different LUN from
51 * first CCB */
52 BTSTAT_INVPARAM = 0x1a, /* invalid parameter in CCB or segment
53 * list */
54 BTSTAT_SENSFAILED = 0x1b, /* auto request sense failed */
55 BTSTAT_TAGREJECT = 0x1c, /* SCSI II tagged queueing message
56 * rejected by target */
57 BTSTAT_BADMSG = 0x1d, /* unsupported message received by the
58 * host adapter */
59 BTSTAT_HAHARDWARE = 0x20, /* host adapter hardware failed */
60 BTSTAT_NORESPONSE = 0x21, /* target did not respond to SCSI ATN,
61 * sent a SCSI RST */
62 BTSTAT_SENTRST = 0x22, /* host adapter asserted a SCSI RST */
63 BTSTAT_RECVRST = 0x23, /* other SCSI devices asserted a SCSI
64 * RST */
65 BTSTAT_DISCONNECT = 0x24, /* target device reconnected improperly
66 * (w/o tag) */
67 BTSTAT_BUSRESET = 0x25, /* host adapter issued BUS device reset */
68 BTSTAT_ABORTQUEUE = 0x26, /* abort queue generated */
69 BTSTAT_HASOFTWARE = 0x27, /* host adapter software error */
70 BTSTAT_HATIMEOUT = 0x30, /* host adapter hardware timeout error */
71 BTSTAT_SCSIPARITY = 0x34, /* SCSI parity error detected */
72};
73
74/*
75 * SCSI device status values.
76 */
77enum ScsiDeviceStatus {
78 SDSTAT_GOOD = 0x00, /* No errors. */
79 SDSTAT_CHECK = 0x02, /* Check condition. */
Alok Kataria851b1642009-10-13 14:51:05 -070080};
81
82/*
83 * Register offsets.
84 *
85 * These registers are accessible both via i/o space and mm i/o.
86 */
87
88enum PVSCSIRegOffset {
89 PVSCSI_REG_OFFSET_COMMAND = 0x0,
90 PVSCSI_REG_OFFSET_COMMAND_DATA = 0x4,
91 PVSCSI_REG_OFFSET_COMMAND_STATUS = 0x8,
92 PVSCSI_REG_OFFSET_LAST_STS_0 = 0x100,
93 PVSCSI_REG_OFFSET_LAST_STS_1 = 0x104,
94 PVSCSI_REG_OFFSET_LAST_STS_2 = 0x108,
95 PVSCSI_REG_OFFSET_LAST_STS_3 = 0x10c,
96 PVSCSI_REG_OFFSET_INTR_STATUS = 0x100c,
97 PVSCSI_REG_OFFSET_INTR_MASK = 0x2010,
98 PVSCSI_REG_OFFSET_KICK_NON_RW_IO = 0x3014,
99 PVSCSI_REG_OFFSET_DEBUG = 0x3018,
100 PVSCSI_REG_OFFSET_KICK_RW_IO = 0x4018,
101};
102
103/*
104 * Virtual h/w commands.
105 */
106
107enum PVSCSICommands {
108 PVSCSI_CMD_FIRST = 0, /* has to be first */
109
110 PVSCSI_CMD_ADAPTER_RESET = 1,
111 PVSCSI_CMD_ISSUE_SCSI = 2,
112 PVSCSI_CMD_SETUP_RINGS = 3,
113 PVSCSI_CMD_RESET_BUS = 4,
114 PVSCSI_CMD_RESET_DEVICE = 5,
115 PVSCSI_CMD_ABORT_CMD = 6,
116 PVSCSI_CMD_CONFIG = 7,
117 PVSCSI_CMD_SETUP_MSG_RING = 8,
118 PVSCSI_CMD_DEVICE_UNPLUG = 9,
Rishi Mehta2a815b52014-03-11 13:51:33 -0700119 PVSCSI_CMD_SETUP_REQCALLTHRESHOLD = 10,
Alok Kataria851b1642009-10-13 14:51:05 -0700120
Rishi Mehta2a815b52014-03-11 13:51:33 -0700121 PVSCSI_CMD_LAST = 11 /* has to be last */
Alok Kataria851b1642009-10-13 14:51:05 -0700122};
123
124/*
125 * Command descriptor for PVSCSI_CMD_RESET_DEVICE --
126 */
127
128struct PVSCSICmdDescResetDevice {
129 u32 target;
130 u8 lun[8];
131} __packed;
132
133/*
Arvind Kumara9310732012-03-08 15:48:53 +0530134 * Command descriptor for PVSCSI_CMD_CONFIG --
135 */
136
137struct PVSCSICmdDescConfigCmd {
138 u64 cmpAddr;
139 u64 configPageAddress;
140 u32 configPageNum;
141 u32 _pad;
142} __packed;
143
Rishi Mehta2a815b52014-03-11 13:51:33 -0700144/*
145 * Command descriptor for PVSCSI_CMD_SETUP_REQCALLTHRESHOLD --
146 */
147
148struct PVSCSICmdDescSetupReqCall {
149 u32 enable;
150} __packed;
151
Arvind Kumara9310732012-03-08 15:48:53 +0530152enum PVSCSIConfigPageType {
153 PVSCSI_CONFIG_PAGE_CONTROLLER = 0x1958,
154 PVSCSI_CONFIG_PAGE_PHY = 0x1959,
155 PVSCSI_CONFIG_PAGE_DEVICE = 0x195a,
156};
157
158enum PVSCSIConfigPageAddressType {
159 PVSCSI_CONFIG_CONTROLLER_ADDRESS = 0x2120,
160 PVSCSI_CONFIG_BUSTARGET_ADDRESS = 0x2121,
161 PVSCSI_CONFIG_PHY_ADDRESS = 0x2122,
162};
163
164/*
Alok Kataria851b1642009-10-13 14:51:05 -0700165 * Command descriptor for PVSCSI_CMD_ABORT_CMD --
166 *
167 * - currently does not support specifying the LUN.
168 * - _pad should be 0.
169 */
170
171struct PVSCSICmdDescAbortCmd {
172 u64 context;
173 u32 target;
174 u32 _pad;
175} __packed;
176
177/*
178 * Command descriptor for PVSCSI_CMD_SETUP_RINGS --
179 *
180 * Notes:
181 * - reqRingNumPages and cmpRingNumPages need to be power of two.
182 * - reqRingNumPages and cmpRingNumPages need to be different from 0,
183 * - reqRingNumPages and cmpRingNumPages need to be inferior to
184 * PVSCSI_SETUP_RINGS_MAX_NUM_PAGES.
185 */
186
187#define PVSCSI_SETUP_RINGS_MAX_NUM_PAGES 32
188struct PVSCSICmdDescSetupRings {
189 u32 reqRingNumPages;
190 u32 cmpRingNumPages;
191 u64 ringsStatePPN;
192 u64 reqRingPPNs[PVSCSI_SETUP_RINGS_MAX_NUM_PAGES];
193 u64 cmpRingPPNs[PVSCSI_SETUP_RINGS_MAX_NUM_PAGES];
194} __packed;
195
196/*
197 * Command descriptor for PVSCSI_CMD_SETUP_MSG_RING --
198 *
199 * Notes:
200 * - this command was not supported in the initial revision of the h/w
201 * interface. Before using it, you need to check that it is supported by
202 * writing PVSCSI_CMD_SETUP_MSG_RING to the 'command' register, then
203 * immediately after read the 'command status' register:
204 * * a value of -1 means that the cmd is NOT supported,
205 * * a value != -1 means that the cmd IS supported.
206 * If it's supported the 'command status' register should return:
207 * sizeof(PVSCSICmdDescSetupMsgRing) / sizeof(u32).
208 * - this command should be issued _after_ the usual SETUP_RINGS so that the
209 * RingsState page is already setup. If not, the command is a nop.
210 * - numPages needs to be a power of two,
211 * - numPages needs to be different from 0,
212 * - _pad should be zero.
213 */
214
215#define PVSCSI_SETUP_MSG_RING_MAX_NUM_PAGES 16
216
217struct PVSCSICmdDescSetupMsgRing {
218 u32 numPages;
219 u32 _pad;
220 u64 ringPPNs[PVSCSI_SETUP_MSG_RING_MAX_NUM_PAGES];
221} __packed;
222
223enum PVSCSIMsgType {
224 PVSCSI_MSG_DEV_ADDED = 0,
225 PVSCSI_MSG_DEV_REMOVED = 1,
226 PVSCSI_MSG_LAST = 2,
227};
228
229/*
230 * Msg descriptor.
231 *
232 * sizeof(struct PVSCSIRingMsgDesc) == 128.
233 *
234 * - type is of type enum PVSCSIMsgType.
235 * - the content of args depend on the type of event being delivered.
236 */
237
238struct PVSCSIRingMsgDesc {
239 u32 type;
240 u32 args[31];
241} __packed;
242
243struct PVSCSIMsgDescDevStatusChanged {
244 u32 type; /* PVSCSI_MSG_DEV _ADDED / _REMOVED */
245 u32 bus;
246 u32 target;
247 u8 lun[8];
248 u32 pad[27];
249} __packed;
250
251/*
252 * Rings state.
253 *
254 * - the fields:
255 * . msgProdIdx,
256 * . msgConsIdx,
257 * . msgNumEntriesLog2,
258 * .. are only used once the SETUP_MSG_RING cmd has been issued.
259 * - '_pad' helps to ensure that the msg related fields are on their own
260 * cache-line.
261 */
262
263struct PVSCSIRingsState {
264 u32 reqProdIdx;
265 u32 reqConsIdx;
266 u32 reqNumEntriesLog2;
267
268 u32 cmpProdIdx;
269 u32 cmpConsIdx;
270 u32 cmpNumEntriesLog2;
271
Rishi Mehta2a815b52014-03-11 13:51:33 -0700272 u32 reqCallThreshold;
273
274 u8 _pad[100];
Alok Kataria851b1642009-10-13 14:51:05 -0700275
276 u32 msgProdIdx;
277 u32 msgConsIdx;
278 u32 msgNumEntriesLog2;
279} __packed;
280
281/*
282 * Request descriptor.
283 *
284 * sizeof(RingReqDesc) = 128
285 *
286 * - context: is a unique identifier of a command. It could normally be any
287 * 64bit value, however we currently store it in the serialNumber variable
288 * of struct SCSI_Command, so we have the following restrictions due to the
289 * way this field is handled in the vmkernel storage stack:
290 * * this value can't be 0,
291 * * the upper 32bit need to be 0 since serialNumber is as a u32.
292 * Currently tracked as PR 292060.
293 * - dataLen: contains the total number of bytes that need to be transferred.
294 * - dataAddr:
295 * * if PVSCSI_FLAG_CMD_WITH_SG_LIST is set: dataAddr is the PA of the first
296 * s/g table segment, each s/g segment is entirely contained on a single
297 * page of physical memory,
298 * * if PVSCSI_FLAG_CMD_WITH_SG_LIST is NOT set, then dataAddr is the PA of
299 * the buffer used for the DMA transfer,
300 * - flags:
301 * * PVSCSI_FLAG_CMD_WITH_SG_LIST: see dataAddr above,
302 * * PVSCSI_FLAG_CMD_DIR_NONE: no DMA involved,
303 * * PVSCSI_FLAG_CMD_DIR_TOHOST: transfer from device to main memory,
304 * * PVSCSI_FLAG_CMD_DIR_TODEVICE: transfer from main memory to device,
305 * * PVSCSI_FLAG_CMD_OUT_OF_BAND_CDB: reserved to handle CDBs larger than
306 * 16bytes. To be specified.
307 * - vcpuHint: vcpuId of the processor that will be most likely waiting for the
308 * completion of the i/o. For guest OSes that use lowest priority message
309 * delivery mode (such as windows), we use this "hint" to deliver the
310 * completion action to the proper vcpu. For now, we can use the vcpuId of
311 * the processor that initiated the i/o as a likely candidate for the vcpu
312 * that will be waiting for the completion..
313 * - bus should be 0: we currently only support bus 0 for now.
314 * - unused should be zero'd.
315 */
316
317#define PVSCSI_FLAG_CMD_WITH_SG_LIST (1 << 0)
318#define PVSCSI_FLAG_CMD_OUT_OF_BAND_CDB (1 << 1)
319#define PVSCSI_FLAG_CMD_DIR_NONE (1 << 2)
320#define PVSCSI_FLAG_CMD_DIR_TOHOST (1 << 3)
321#define PVSCSI_FLAG_CMD_DIR_TODEVICE (1 << 4)
322
323struct PVSCSIRingReqDesc {
324 u64 context;
325 u64 dataAddr;
326 u64 dataLen;
327 u64 senseAddr;
328 u32 senseLen;
329 u32 flags;
330 u8 cdb[16];
331 u8 cdbLen;
332 u8 lun[8];
333 u8 tag;
334 u8 bus;
335 u8 target;
336 u8 vcpuHint;
337 u8 unused[59];
338} __packed;
339
340/*
341 * Scatter-gather list management.
342 *
343 * As described above, when PVSCSI_FLAG_CMD_WITH_SG_LIST is set in the
344 * RingReqDesc.flags, then RingReqDesc.dataAddr is the PA of the first s/g
345 * table segment.
346 *
347 * - each segment of the s/g table contain a succession of struct
348 * PVSCSISGElement.
349 * - each segment is entirely contained on a single physical page of memory.
350 * - a "chain" s/g element has the flag PVSCSI_SGE_FLAG_CHAIN_ELEMENT set in
351 * PVSCSISGElement.flags and in this case:
352 * * addr is the PA of the next s/g segment,
353 * * length is undefined, assumed to be 0.
354 */
355
356struct PVSCSISGElement {
357 u64 addr;
358 u32 length;
359 u32 flags;
360} __packed;
361
362/*
363 * Completion descriptor.
364 *
365 * sizeof(RingCmpDesc) = 32
366 *
367 * - context: identifier of the command. The same thing that was specified
368 * under "context" as part of struct RingReqDesc at initiation time,
369 * - dataLen: number of bytes transferred for the actual i/o operation,
370 * - senseLen: number of bytes written into the sense buffer,
371 * - hostStatus: adapter status,
372 * - scsiStatus: device status,
373 * - _pad should be zero.
374 */
375
376struct PVSCSIRingCmpDesc {
377 u64 context;
378 u64 dataLen;
379 u32 senseLen;
380 u16 hostStatus;
381 u16 scsiStatus;
382 u32 _pad[2];
383} __packed;
384
Arvind Kumara9310732012-03-08 15:48:53 +0530385struct PVSCSIConfigPageHeader {
386 u32 pageNum;
387 u16 numDwords;
388 u16 hostStatus;
389 u16 scsiStatus;
390 u16 reserved[3];
391} __packed;
392
393struct PVSCSIConfigPageController {
394 struct PVSCSIConfigPageHeader header;
395 u64 nodeWWN; /* Device name as defined in the SAS spec. */
396 u16 manufacturer[64];
397 u16 serialNumber[64];
398 u16 opromVersion[32];
399 u16 hwVersion[32];
400 u16 firmwareVersion[32];
401 u32 numPhys;
402 u8 useConsecutivePhyWWNs;
403 u8 reserved[3];
404} __packed;
405
Alok Kataria851b1642009-10-13 14:51:05 -0700406/*
407 * Interrupt status / IRQ bits.
408 */
409
410#define PVSCSI_INTR_CMPL_0 (1 << 0)
411#define PVSCSI_INTR_CMPL_1 (1 << 1)
412#define PVSCSI_INTR_CMPL_MASK MASK(2)
413
414#define PVSCSI_INTR_MSG_0 (1 << 2)
415#define PVSCSI_INTR_MSG_1 (1 << 3)
416#define PVSCSI_INTR_MSG_MASK (MASK(2) << 2)
417
418#define PVSCSI_INTR_ALL_SUPPORTED MASK(4)
419
420/*
421 * Number of MSI-X vectors supported.
422 */
423#define PVSCSI_MAX_INTRS 24
424
425/*
426 * Enumeration of supported MSI-X vectors
427 */
428#define PVSCSI_VECTOR_COMPLETION 0
429
430/*
431 * Misc constants for the rings.
432 */
433
434#define PVSCSI_MAX_NUM_PAGES_REQ_RING PVSCSI_SETUP_RINGS_MAX_NUM_PAGES
435#define PVSCSI_MAX_NUM_PAGES_CMP_RING PVSCSI_SETUP_RINGS_MAX_NUM_PAGES
436#define PVSCSI_MAX_NUM_PAGES_MSG_RING PVSCSI_SETUP_MSG_RING_MAX_NUM_PAGES
437
438#define PVSCSI_MAX_NUM_REQ_ENTRIES_PER_PAGE \
439 (PAGE_SIZE / sizeof(struct PVSCSIRingReqDesc))
440
441#define PVSCSI_MAX_REQ_QUEUE_DEPTH \
442 (PVSCSI_MAX_NUM_PAGES_REQ_RING * PVSCSI_MAX_NUM_REQ_ENTRIES_PER_PAGE)
443
444#define PVSCSI_MEM_SPACE_COMMAND_NUM_PAGES 1
445#define PVSCSI_MEM_SPACE_INTR_STATUS_NUM_PAGES 1
446#define PVSCSI_MEM_SPACE_MISC_NUM_PAGES 2
447#define PVSCSI_MEM_SPACE_KICK_IO_NUM_PAGES 2
448#define PVSCSI_MEM_SPACE_MSIX_NUM_PAGES 2
449
450enum PVSCSIMemSpace {
451 PVSCSI_MEM_SPACE_COMMAND_PAGE = 0,
452 PVSCSI_MEM_SPACE_INTR_STATUS_PAGE = 1,
453 PVSCSI_MEM_SPACE_MISC_PAGE = 2,
454 PVSCSI_MEM_SPACE_KICK_IO_PAGE = 4,
455 PVSCSI_MEM_SPACE_MSIX_TABLE_PAGE = 6,
456 PVSCSI_MEM_SPACE_MSIX_PBA_PAGE = 7,
457};
458
459#define PVSCSI_MEM_SPACE_NUM_PAGES \
460 (PVSCSI_MEM_SPACE_COMMAND_NUM_PAGES + \
461 PVSCSI_MEM_SPACE_INTR_STATUS_NUM_PAGES + \
462 PVSCSI_MEM_SPACE_MISC_NUM_PAGES + \
463 PVSCSI_MEM_SPACE_KICK_IO_NUM_PAGES + \
464 PVSCSI_MEM_SPACE_MSIX_NUM_PAGES)
465
466#define PVSCSI_MEM_SPACE_SIZE (PVSCSI_MEM_SPACE_NUM_PAGES * PAGE_SIZE)
467
468#endif /* _VMW_PVSCSI_H_ */