Maxime Bizon | 553d6d5 | 2009-09-28 14:49:43 +0200 | [diff] [blame] | 1 | /* |
| 2 | * This file is subject to the terms and conditions of the GNU General Public |
| 3 | * License. See the file "COPYING" in the main directory of this archive |
| 4 | * for more details. |
| 5 | * |
| 6 | * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> |
| 7 | */ |
| 8 | |
| 9 | #include <linux/kernel.h> |
| 10 | #include <linux/module.h> |
| 11 | #include <linux/ioport.h> |
| 12 | #include <linux/timer.h> |
| 13 | #include <linux/platform_device.h> |
Tejun Heo | 5a0e3ad | 2010-03-24 17:04:11 +0900 | [diff] [blame] | 14 | #include <linux/slab.h> |
Maxime Bizon | 553d6d5 | 2009-09-28 14:49:43 +0200 | [diff] [blame] | 15 | #include <linux/delay.h> |
| 16 | #include <linux/pci.h> |
| 17 | #include <linux/gpio.h> |
| 18 | |
| 19 | #include <bcm63xx_regs.h> |
| 20 | #include <bcm63xx_io.h> |
| 21 | #include "bcm63xx_pcmcia.h" |
| 22 | |
| 23 | #define PFX "bcm63xx_pcmcia: " |
| 24 | |
| 25 | #ifdef CONFIG_CARDBUS |
| 26 | /* if cardbus is used, platform device needs reference to actual pci |
| 27 | * device */ |
| 28 | static struct pci_dev *bcm63xx_cb_dev; |
| 29 | #endif |
| 30 | |
| 31 | /* |
| 32 | * read/write helper for pcmcia regs |
| 33 | */ |
| 34 | static inline u32 pcmcia_readl(struct bcm63xx_pcmcia_socket *skt, u32 off) |
| 35 | { |
| 36 | return bcm_readl(skt->base + off); |
| 37 | } |
| 38 | |
| 39 | static inline void pcmcia_writel(struct bcm63xx_pcmcia_socket *skt, |
| 40 | u32 val, u32 off) |
| 41 | { |
| 42 | bcm_writel(val, skt->base + off); |
| 43 | } |
| 44 | |
| 45 | /* |
| 46 | * This callback should (re-)initialise the socket, turn on status |
| 47 | * interrupts and PCMCIA bus, and wait for power to stabilise so that |
| 48 | * the card status signals report correctly. |
| 49 | * |
| 50 | * Hardware cannot do that. |
| 51 | */ |
| 52 | static int bcm63xx_pcmcia_sock_init(struct pcmcia_socket *sock) |
| 53 | { |
| 54 | return 0; |
| 55 | } |
| 56 | |
| 57 | /* |
| 58 | * This callback should remove power on the socket, disable IRQs from |
| 59 | * the card, turn off status interrupts, and disable the PCMCIA bus. |
| 60 | * |
| 61 | * Hardware cannot do that. |
| 62 | */ |
| 63 | static int bcm63xx_pcmcia_suspend(struct pcmcia_socket *sock) |
| 64 | { |
| 65 | return 0; |
| 66 | } |
| 67 | |
| 68 | /* |
| 69 | * Implements the set_socket() operation for the in-kernel PCMCIA |
| 70 | * service (formerly SS_SetSocket in Card Services). We more or |
| 71 | * less punt all of this work and let the kernel handle the details |
| 72 | * of power configuration, reset, &c. We also record the value of |
| 73 | * `state' in order to regurgitate it to the PCMCIA core later. |
| 74 | */ |
| 75 | static int bcm63xx_pcmcia_set_socket(struct pcmcia_socket *sock, |
| 76 | socket_state_t *state) |
| 77 | { |
| 78 | struct bcm63xx_pcmcia_socket *skt; |
| 79 | unsigned long flags; |
| 80 | u32 val; |
| 81 | |
| 82 | skt = sock->driver_data; |
| 83 | |
| 84 | spin_lock_irqsave(&skt->lock, flags); |
| 85 | |
| 86 | /* note: hardware cannot control socket power, so we will |
| 87 | * always report SS_POWERON */ |
| 88 | |
| 89 | /* apply socket reset */ |
| 90 | val = pcmcia_readl(skt, PCMCIA_C1_REG); |
| 91 | if (state->flags & SS_RESET) |
| 92 | val |= PCMCIA_C1_RESET_MASK; |
| 93 | else |
| 94 | val &= ~PCMCIA_C1_RESET_MASK; |
| 95 | |
| 96 | /* reverse reset logic for cardbus card */ |
| 97 | if (skt->card_detected && (skt->card_type & CARD_CARDBUS)) |
| 98 | val ^= PCMCIA_C1_RESET_MASK; |
| 99 | |
| 100 | pcmcia_writel(skt, val, PCMCIA_C1_REG); |
| 101 | |
| 102 | /* keep requested state for event reporting */ |
| 103 | skt->requested_state = *state; |
| 104 | |
| 105 | spin_unlock_irqrestore(&skt->lock, flags); |
| 106 | |
| 107 | return 0; |
| 108 | } |
| 109 | |
| 110 | /* |
| 111 | * identity cardtype from VS[12] input, CD[12] input while only VS2 is |
| 112 | * floating, and CD[12] input while only VS1 is floating |
| 113 | */ |
| 114 | enum { |
| 115 | IN_VS1 = (1 << 0), |
| 116 | IN_VS2 = (1 << 1), |
| 117 | IN_CD1_VS2H = (1 << 2), |
| 118 | IN_CD2_VS2H = (1 << 3), |
| 119 | IN_CD1_VS1H = (1 << 4), |
| 120 | IN_CD2_VS1H = (1 << 5), |
| 121 | }; |
| 122 | |
| 123 | static const u8 vscd_to_cardtype[] = { |
| 124 | |
| 125 | /* VS1 float, VS2 float */ |
| 126 | [IN_VS1 | IN_VS2] = (CARD_PCCARD | CARD_5V), |
| 127 | |
| 128 | /* VS1 grounded, VS2 float */ |
| 129 | [IN_VS2] = (CARD_PCCARD | CARD_5V | CARD_3V), |
| 130 | |
| 131 | /* VS1 grounded, VS2 grounded */ |
| 132 | [0] = (CARD_PCCARD | CARD_5V | CARD_3V | CARD_XV), |
| 133 | |
| 134 | /* VS1 tied to CD1, VS2 float */ |
| 135 | [IN_VS1 | IN_VS2 | IN_CD1_VS1H] = (CARD_CARDBUS | CARD_3V), |
| 136 | |
| 137 | /* VS1 grounded, VS2 tied to CD2 */ |
| 138 | [IN_VS2 | IN_CD2_VS2H] = (CARD_CARDBUS | CARD_3V | CARD_XV), |
| 139 | |
| 140 | /* VS1 tied to CD2, VS2 grounded */ |
| 141 | [IN_VS1 | IN_CD2_VS1H] = (CARD_CARDBUS | CARD_3V | CARD_XV | CARD_YV), |
| 142 | |
| 143 | /* VS1 float, VS2 grounded */ |
| 144 | [IN_VS1] = (CARD_PCCARD | CARD_XV), |
| 145 | |
| 146 | /* VS1 float, VS2 tied to CD2 */ |
| 147 | [IN_VS1 | IN_VS2 | IN_CD2_VS2H] = (CARD_CARDBUS | CARD_3V), |
| 148 | |
| 149 | /* VS1 float, VS2 tied to CD1 */ |
| 150 | [IN_VS1 | IN_VS2 | IN_CD1_VS2H] = (CARD_CARDBUS | CARD_XV | CARD_YV), |
| 151 | |
| 152 | /* VS1 tied to CD2, VS2 float */ |
| 153 | [IN_VS1 | IN_VS2 | IN_CD2_VS1H] = (CARD_CARDBUS | CARD_YV), |
| 154 | |
| 155 | /* VS2 grounded, VS1 is tied to CD1, CD2 is grounded */ |
| 156 | [IN_VS1 | IN_CD1_VS1H] = 0, /* ignore cardbay */ |
| 157 | }; |
| 158 | |
| 159 | /* |
| 160 | * poll hardware to check card insertion status |
| 161 | */ |
| 162 | static unsigned int __get_socket_status(struct bcm63xx_pcmcia_socket *skt) |
| 163 | { |
| 164 | unsigned int stat; |
| 165 | u32 val; |
| 166 | |
| 167 | stat = 0; |
| 168 | |
| 169 | /* check CD for card presence */ |
| 170 | val = pcmcia_readl(skt, PCMCIA_C1_REG); |
| 171 | |
| 172 | if (!(val & PCMCIA_C1_CD1_MASK) && !(val & PCMCIA_C1_CD2_MASK)) |
| 173 | stat |= SS_DETECT; |
| 174 | |
| 175 | /* if new insertion, detect cardtype */ |
| 176 | if ((stat & SS_DETECT) && !skt->card_detected) { |
| 177 | unsigned int stat = 0; |
| 178 | |
| 179 | /* float VS1, float VS2 */ |
| 180 | val |= PCMCIA_C1_VS1OE_MASK; |
| 181 | val |= PCMCIA_C1_VS2OE_MASK; |
| 182 | pcmcia_writel(skt, val, PCMCIA_C1_REG); |
| 183 | |
| 184 | /* wait for output to stabilize and read VS[12] */ |
| 185 | udelay(10); |
| 186 | val = pcmcia_readl(skt, PCMCIA_C1_REG); |
| 187 | stat |= (val & PCMCIA_C1_VS1_MASK) ? IN_VS1 : 0; |
| 188 | stat |= (val & PCMCIA_C1_VS2_MASK) ? IN_VS2 : 0; |
| 189 | |
| 190 | /* drive VS1 low, float VS2 */ |
| 191 | val &= ~PCMCIA_C1_VS1OE_MASK; |
| 192 | val |= PCMCIA_C1_VS2OE_MASK; |
| 193 | pcmcia_writel(skt, val, PCMCIA_C1_REG); |
| 194 | |
| 195 | /* wait for output to stabilize and read CD[12] */ |
| 196 | udelay(10); |
| 197 | val = pcmcia_readl(skt, PCMCIA_C1_REG); |
| 198 | stat |= (val & PCMCIA_C1_CD1_MASK) ? IN_CD1_VS2H : 0; |
| 199 | stat |= (val & PCMCIA_C1_CD2_MASK) ? IN_CD2_VS2H : 0; |
| 200 | |
| 201 | /* float VS1, drive VS2 low */ |
| 202 | val |= PCMCIA_C1_VS1OE_MASK; |
| 203 | val &= ~PCMCIA_C1_VS2OE_MASK; |
| 204 | pcmcia_writel(skt, val, PCMCIA_C1_REG); |
| 205 | |
| 206 | /* wait for output to stabilize and read CD[12] */ |
| 207 | udelay(10); |
| 208 | val = pcmcia_readl(skt, PCMCIA_C1_REG); |
| 209 | stat |= (val & PCMCIA_C1_CD1_MASK) ? IN_CD1_VS1H : 0; |
| 210 | stat |= (val & PCMCIA_C1_CD2_MASK) ? IN_CD2_VS1H : 0; |
| 211 | |
| 212 | /* guess cardtype from all this */ |
| 213 | skt->card_type = vscd_to_cardtype[stat]; |
| 214 | if (!skt->card_type) |
| 215 | dev_err(&skt->socket.dev, "unsupported card type\n"); |
| 216 | |
| 217 | /* drive both VS pin to 0 again */ |
| 218 | val &= ~(PCMCIA_C1_VS1OE_MASK | PCMCIA_C1_VS2OE_MASK); |
| 219 | |
| 220 | /* enable correct logic */ |
| 221 | val &= ~(PCMCIA_C1_EN_PCMCIA_MASK | PCMCIA_C1_EN_CARDBUS_MASK); |
| 222 | if (skt->card_type & CARD_PCCARD) |
| 223 | val |= PCMCIA_C1_EN_PCMCIA_MASK; |
| 224 | else |
| 225 | val |= PCMCIA_C1_EN_CARDBUS_MASK; |
| 226 | |
| 227 | pcmcia_writel(skt, val, PCMCIA_C1_REG); |
| 228 | } |
| 229 | skt->card_detected = (stat & SS_DETECT) ? 1 : 0; |
| 230 | |
| 231 | /* report card type/voltage */ |
| 232 | if (skt->card_type & CARD_CARDBUS) |
| 233 | stat |= SS_CARDBUS; |
| 234 | if (skt->card_type & CARD_3V) |
| 235 | stat |= SS_3VCARD; |
| 236 | if (skt->card_type & CARD_XV) |
| 237 | stat |= SS_XVCARD; |
| 238 | stat |= SS_POWERON; |
| 239 | |
| 240 | if (gpio_get_value(skt->pd->ready_gpio)) |
| 241 | stat |= SS_READY; |
| 242 | |
| 243 | return stat; |
| 244 | } |
| 245 | |
| 246 | /* |
| 247 | * core request to get current socket status |
| 248 | */ |
| 249 | static int bcm63xx_pcmcia_get_status(struct pcmcia_socket *sock, |
| 250 | unsigned int *status) |
| 251 | { |
| 252 | struct bcm63xx_pcmcia_socket *skt; |
| 253 | |
| 254 | skt = sock->driver_data; |
| 255 | |
| 256 | spin_lock_bh(&skt->lock); |
| 257 | *status = __get_socket_status(skt); |
| 258 | spin_unlock_bh(&skt->lock); |
| 259 | |
| 260 | return 0; |
| 261 | } |
| 262 | |
| 263 | /* |
| 264 | * socket polling timer callback |
| 265 | */ |
| 266 | static void bcm63xx_pcmcia_poll(unsigned long data) |
| 267 | { |
| 268 | struct bcm63xx_pcmcia_socket *skt; |
| 269 | unsigned int stat, events; |
| 270 | |
| 271 | skt = (struct bcm63xx_pcmcia_socket *)data; |
| 272 | |
| 273 | spin_lock_bh(&skt->lock); |
| 274 | |
| 275 | stat = __get_socket_status(skt); |
| 276 | |
| 277 | /* keep only changed bits, and mask with required one from the |
| 278 | * core */ |
| 279 | events = (stat ^ skt->old_status) & skt->requested_state.csc_mask; |
| 280 | skt->old_status = stat; |
| 281 | spin_unlock_bh(&skt->lock); |
| 282 | |
| 283 | if (events) |
| 284 | pcmcia_parse_events(&skt->socket, events); |
| 285 | |
| 286 | mod_timer(&skt->timer, |
| 287 | jiffies + msecs_to_jiffies(BCM63XX_PCMCIA_POLL_RATE)); |
| 288 | } |
| 289 | |
| 290 | static int bcm63xx_pcmcia_set_io_map(struct pcmcia_socket *sock, |
| 291 | struct pccard_io_map *map) |
| 292 | { |
| 293 | /* this doesn't seem to be called by pcmcia layer if static |
| 294 | * mapping is used */ |
| 295 | return 0; |
| 296 | } |
| 297 | |
| 298 | static int bcm63xx_pcmcia_set_mem_map(struct pcmcia_socket *sock, |
| 299 | struct pccard_mem_map *map) |
| 300 | { |
| 301 | struct bcm63xx_pcmcia_socket *skt; |
| 302 | struct resource *res; |
| 303 | |
| 304 | skt = sock->driver_data; |
| 305 | if (map->flags & MAP_ATTRIB) |
| 306 | res = skt->attr_res; |
| 307 | else |
| 308 | res = skt->common_res; |
| 309 | |
| 310 | map->static_start = res->start + map->card_start; |
| 311 | return 0; |
| 312 | } |
| 313 | |
| 314 | static struct pccard_operations bcm63xx_pcmcia_operations = { |
| 315 | .init = bcm63xx_pcmcia_sock_init, |
| 316 | .suspend = bcm63xx_pcmcia_suspend, |
| 317 | .get_status = bcm63xx_pcmcia_get_status, |
| 318 | .set_socket = bcm63xx_pcmcia_set_socket, |
| 319 | .set_io_map = bcm63xx_pcmcia_set_io_map, |
| 320 | .set_mem_map = bcm63xx_pcmcia_set_mem_map, |
| 321 | }; |
| 322 | |
| 323 | /* |
| 324 | * register pcmcia socket to core |
| 325 | */ |
Bill Pemberton | 34cdf25 | 2012-11-19 13:23:12 -0500 | [diff] [blame] | 326 | static int bcm63xx_drv_pcmcia_probe(struct platform_device *pdev) |
Maxime Bizon | 553d6d5 | 2009-09-28 14:49:43 +0200 | [diff] [blame] | 327 | { |
| 328 | struct bcm63xx_pcmcia_socket *skt; |
| 329 | struct pcmcia_socket *sock; |
| 330 | struct resource *res, *irq_res; |
| 331 | unsigned int regmem_size = 0, iomem_size = 0; |
| 332 | u32 val; |
| 333 | int ret; |
| 334 | |
| 335 | skt = kzalloc(sizeof(*skt), GFP_KERNEL); |
| 336 | if (!skt) |
| 337 | return -ENOMEM; |
| 338 | spin_lock_init(&skt->lock); |
| 339 | sock = &skt->socket; |
| 340 | sock->driver_data = skt; |
| 341 | |
| 342 | /* make sure we have all resources we need */ |
| 343 | skt->common_res = platform_get_resource(pdev, IORESOURCE_MEM, 1); |
| 344 | skt->attr_res = platform_get_resource(pdev, IORESOURCE_MEM, 2); |
| 345 | irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); |
| 346 | skt->pd = pdev->dev.platform_data; |
| 347 | if (!skt->common_res || !skt->attr_res || !irq_res || !skt->pd) { |
| 348 | ret = -EINVAL; |
| 349 | goto err; |
| 350 | } |
| 351 | |
| 352 | /* remap pcmcia registers */ |
| 353 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| 354 | regmem_size = resource_size(res); |
| 355 | if (!request_mem_region(res->start, regmem_size, "bcm63xx_pcmcia")) { |
| 356 | ret = -EINVAL; |
| 357 | goto err; |
| 358 | } |
| 359 | skt->reg_res = res; |
| 360 | |
| 361 | skt->base = ioremap(res->start, regmem_size); |
| 362 | if (!skt->base) { |
| 363 | ret = -ENOMEM; |
| 364 | goto err; |
| 365 | } |
| 366 | |
| 367 | /* remap io registers */ |
| 368 | res = platform_get_resource(pdev, IORESOURCE_MEM, 3); |
| 369 | iomem_size = resource_size(res); |
| 370 | skt->io_base = ioremap(res->start, iomem_size); |
| 371 | if (!skt->io_base) { |
| 372 | ret = -ENOMEM; |
| 373 | goto err; |
| 374 | } |
| 375 | |
| 376 | /* resources are static */ |
| 377 | sock->resource_ops = &pccard_static_ops; |
| 378 | sock->ops = &bcm63xx_pcmcia_operations; |
| 379 | sock->owner = THIS_MODULE; |
| 380 | sock->dev.parent = &pdev->dev; |
| 381 | sock->features = SS_CAP_STATIC_MAP | SS_CAP_PCCARD; |
| 382 | sock->io_offset = (unsigned long)skt->io_base; |
| 383 | sock->pci_irq = irq_res->start; |
| 384 | |
| 385 | #ifdef CONFIG_CARDBUS |
| 386 | sock->cb_dev = bcm63xx_cb_dev; |
| 387 | if (bcm63xx_cb_dev) |
| 388 | sock->features |= SS_CAP_CARDBUS; |
| 389 | #endif |
| 390 | |
| 391 | /* assume common & attribute memory have the same size */ |
| 392 | sock->map_size = resource_size(skt->common_res); |
| 393 | |
| 394 | /* initialize polling timer */ |
| 395 | setup_timer(&skt->timer, bcm63xx_pcmcia_poll, (unsigned long)skt); |
| 396 | |
| 397 | /* initialize pcmcia control register, drive VS[12] to 0, |
| 398 | * leave CB IDSEL to the old value since it is set by the PCI |
| 399 | * layer */ |
| 400 | val = pcmcia_readl(skt, PCMCIA_C1_REG); |
| 401 | val &= PCMCIA_C1_CBIDSEL_MASK; |
| 402 | val |= PCMCIA_C1_EN_PCMCIA_GPIO_MASK; |
| 403 | pcmcia_writel(skt, val, PCMCIA_C1_REG); |
| 404 | |
| 405 | /* |
| 406 | * Hardware has only one set of timings registers, not one for |
| 407 | * each memory access type, so we configure them for the |
| 408 | * slowest one: attribute memory. |
| 409 | */ |
| 410 | val = PCMCIA_C2_DATA16_MASK; |
| 411 | val |= 10 << PCMCIA_C2_RWCOUNT_SHIFT; |
| 412 | val |= 6 << PCMCIA_C2_INACTIVE_SHIFT; |
| 413 | val |= 3 << PCMCIA_C2_SETUP_SHIFT; |
| 414 | val |= 3 << PCMCIA_C2_HOLD_SHIFT; |
| 415 | pcmcia_writel(skt, val, PCMCIA_C2_REG); |
| 416 | |
| 417 | ret = pcmcia_register_socket(sock); |
| 418 | if (ret) |
| 419 | goto err; |
| 420 | |
| 421 | /* start polling socket */ |
| 422 | mod_timer(&skt->timer, |
| 423 | jiffies + msecs_to_jiffies(BCM63XX_PCMCIA_POLL_RATE)); |
| 424 | |
| 425 | platform_set_drvdata(pdev, skt); |
| 426 | return 0; |
| 427 | |
| 428 | err: |
| 429 | if (skt->io_base) |
| 430 | iounmap(skt->io_base); |
| 431 | if (skt->base) |
| 432 | iounmap(skt->base); |
| 433 | if (skt->reg_res) |
| 434 | release_mem_region(skt->reg_res->start, regmem_size); |
| 435 | kfree(skt); |
| 436 | return ret; |
| 437 | } |
| 438 | |
Bill Pemberton | e765a02 | 2012-11-19 13:26:05 -0500 | [diff] [blame] | 439 | static int bcm63xx_drv_pcmcia_remove(struct platform_device *pdev) |
Maxime Bizon | 553d6d5 | 2009-09-28 14:49:43 +0200 | [diff] [blame] | 440 | { |
| 441 | struct bcm63xx_pcmcia_socket *skt; |
| 442 | struct resource *res; |
| 443 | |
| 444 | skt = platform_get_drvdata(pdev); |
| 445 | del_timer_sync(&skt->timer); |
| 446 | iounmap(skt->base); |
| 447 | iounmap(skt->io_base); |
| 448 | res = skt->reg_res; |
| 449 | release_mem_region(res->start, resource_size(res)); |
| 450 | kfree(skt); |
| 451 | return 0; |
| 452 | } |
| 453 | |
| 454 | struct platform_driver bcm63xx_pcmcia_driver = { |
| 455 | .probe = bcm63xx_drv_pcmcia_probe, |
Bill Pemberton | 96364e3 | 2012-11-19 13:20:38 -0500 | [diff] [blame] | 456 | .remove = bcm63xx_drv_pcmcia_remove, |
Maxime Bizon | 553d6d5 | 2009-09-28 14:49:43 +0200 | [diff] [blame] | 457 | .driver = { |
| 458 | .name = "bcm63xx_pcmcia", |
| 459 | .owner = THIS_MODULE, |
| 460 | }, |
| 461 | }; |
| 462 | |
| 463 | #ifdef CONFIG_CARDBUS |
Bill Pemberton | 34cdf25 | 2012-11-19 13:23:12 -0500 | [diff] [blame] | 464 | static int bcm63xx_cb_probe(struct pci_dev *dev, |
Maxime Bizon | 553d6d5 | 2009-09-28 14:49:43 +0200 | [diff] [blame] | 465 | const struct pci_device_id *id) |
| 466 | { |
| 467 | /* keep pci device */ |
| 468 | bcm63xx_cb_dev = dev; |
| 469 | return platform_driver_register(&bcm63xx_pcmcia_driver); |
| 470 | } |
| 471 | |
Bill Pemberton | e765a02 | 2012-11-19 13:26:05 -0500 | [diff] [blame] | 472 | static void bcm63xx_cb_exit(struct pci_dev *dev) |
Maxime Bizon | 553d6d5 | 2009-09-28 14:49:43 +0200 | [diff] [blame] | 473 | { |
| 474 | platform_driver_unregister(&bcm63xx_pcmcia_driver); |
| 475 | bcm63xx_cb_dev = NULL; |
| 476 | } |
| 477 | |
Axel Lin | 2b2c5d8 | 2011-12-27 16:17:46 +0800 | [diff] [blame] | 478 | static DEFINE_PCI_DEVICE_TABLE(bcm63xx_cb_table) = { |
Maxime Bizon | 553d6d5 | 2009-09-28 14:49:43 +0200 | [diff] [blame] | 479 | { |
| 480 | .vendor = PCI_VENDOR_ID_BROADCOM, |
| 481 | .device = BCM6348_CPU_ID, |
| 482 | .subvendor = PCI_VENDOR_ID_BROADCOM, |
| 483 | .subdevice = PCI_ANY_ID, |
| 484 | .class = PCI_CLASS_BRIDGE_CARDBUS << 8, |
| 485 | .class_mask = ~0, |
| 486 | }, |
| 487 | |
| 488 | { |
| 489 | .vendor = PCI_VENDOR_ID_BROADCOM, |
| 490 | .device = BCM6358_CPU_ID, |
| 491 | .subvendor = PCI_VENDOR_ID_BROADCOM, |
| 492 | .subdevice = PCI_ANY_ID, |
| 493 | .class = PCI_CLASS_BRIDGE_CARDBUS << 8, |
| 494 | .class_mask = ~0, |
| 495 | }, |
| 496 | |
| 497 | { }, |
| 498 | }; |
| 499 | |
| 500 | MODULE_DEVICE_TABLE(pci, bcm63xx_cb_table); |
| 501 | |
| 502 | static struct pci_driver bcm63xx_cardbus_driver = { |
| 503 | .name = "bcm63xx_cardbus", |
| 504 | .id_table = bcm63xx_cb_table, |
| 505 | .probe = bcm63xx_cb_probe, |
Bill Pemberton | 96364e3 | 2012-11-19 13:20:38 -0500 | [diff] [blame] | 506 | .remove = bcm63xx_cb_exit, |
Maxime Bizon | 553d6d5 | 2009-09-28 14:49:43 +0200 | [diff] [blame] | 507 | }; |
| 508 | #endif |
| 509 | |
| 510 | /* |
| 511 | * if cardbus support is enabled, register our platform device after |
| 512 | * our fake cardbus bridge has been registered |
| 513 | */ |
| 514 | static int __init bcm63xx_pcmcia_init(void) |
| 515 | { |
| 516 | #ifdef CONFIG_CARDBUS |
| 517 | return pci_register_driver(&bcm63xx_cardbus_driver); |
| 518 | #else |
| 519 | return platform_driver_register(&bcm63xx_pcmcia_driver); |
| 520 | #endif |
| 521 | } |
| 522 | |
| 523 | static void __exit bcm63xx_pcmcia_exit(void) |
| 524 | { |
| 525 | #ifdef CONFIG_CARDBUS |
| 526 | return pci_unregister_driver(&bcm63xx_cardbus_driver); |
| 527 | #else |
| 528 | platform_driver_unregister(&bcm63xx_pcmcia_driver); |
| 529 | #endif |
| 530 | } |
| 531 | |
| 532 | module_init(bcm63xx_pcmcia_init); |
| 533 | module_exit(bcm63xx_pcmcia_exit); |
| 534 | |
| 535 | MODULE_LICENSE("GPL"); |
| 536 | MODULE_AUTHOR("Maxime Bizon <mbizon@freebox.fr>"); |
| 537 | MODULE_DESCRIPTION("Linux PCMCIA Card Services: bcm63xx Socket Controller"); |