Oleksij Rempel | aae03dc | 2015-11-25 20:33:22 +0100 | [diff] [blame] | 1 | /* |
| 2 | * Watchdog driver for Alphascale ASM9260. |
| 3 | * |
| 4 | * Copyright (c) 2014 Oleksij Rempel <linux@rempel-privat.de> |
| 5 | * |
| 6 | * Licensed under GPLv2 or later. |
| 7 | */ |
| 8 | |
| 9 | #include <linux/bitops.h> |
| 10 | #include <linux/clk.h> |
| 11 | #include <linux/delay.h> |
| 12 | #include <linux/interrupt.h> |
| 13 | #include <linux/io.h> |
| 14 | #include <linux/module.h> |
| 15 | #include <linux/of.h> |
| 16 | #include <linux/platform_device.h> |
| 17 | #include <linux/reboot.h> |
| 18 | #include <linux/reset.h> |
| 19 | #include <linux/watchdog.h> |
| 20 | |
| 21 | #define CLOCK_FREQ 1000000 |
| 22 | |
| 23 | /* Watchdog Mode register */ |
| 24 | #define HW_WDMOD 0x00 |
| 25 | /* Wake interrupt. Set by HW, can't be cleared. */ |
| 26 | #define BM_MOD_WDINT BIT(3) |
| 27 | /* This bit set if timeout reached. Cleared by SW. */ |
| 28 | #define BM_MOD_WDTOF BIT(2) |
| 29 | /* HW Reset on timeout */ |
| 30 | #define BM_MOD_WDRESET BIT(1) |
| 31 | /* WD enable */ |
| 32 | #define BM_MOD_WDEN BIT(0) |
| 33 | |
| 34 | /* |
| 35 | * Watchdog Timer Constant register |
| 36 | * Minimal value is 0xff, the meaning of this value |
| 37 | * depends on used clock: T = WDCLK * (0xff + 1) * 4 |
| 38 | */ |
| 39 | #define HW_WDTC 0x04 |
| 40 | #define BM_WDTC_MAX(freq) (0x7fffffff / (freq)) |
| 41 | |
| 42 | /* Watchdog Feed register */ |
| 43 | #define HW_WDFEED 0x08 |
| 44 | |
| 45 | /* Watchdog Timer Value register */ |
| 46 | #define HW_WDTV 0x0c |
| 47 | |
| 48 | #define ASM9260_WDT_DEFAULT_TIMEOUT 30 |
| 49 | |
| 50 | enum asm9260_wdt_mode { |
| 51 | HW_RESET, |
| 52 | SW_RESET, |
| 53 | DEBUG, |
| 54 | }; |
| 55 | |
| 56 | struct asm9260_wdt_priv { |
| 57 | struct device *dev; |
| 58 | struct watchdog_device wdd; |
| 59 | struct clk *clk; |
| 60 | struct clk *clk_ahb; |
| 61 | struct reset_control *rst; |
| 62 | struct notifier_block restart_handler; |
| 63 | |
| 64 | void __iomem *iobase; |
| 65 | int irq; |
| 66 | unsigned long wdt_freq; |
| 67 | enum asm9260_wdt_mode mode; |
| 68 | }; |
| 69 | |
| 70 | static int asm9260_wdt_feed(struct watchdog_device *wdd) |
| 71 | { |
| 72 | struct asm9260_wdt_priv *priv = watchdog_get_drvdata(wdd); |
| 73 | |
| 74 | iowrite32(0xaa, priv->iobase + HW_WDFEED); |
| 75 | iowrite32(0x55, priv->iobase + HW_WDFEED); |
| 76 | |
| 77 | return 0; |
| 78 | } |
| 79 | |
| 80 | static unsigned int asm9260_wdt_gettimeleft(struct watchdog_device *wdd) |
| 81 | { |
| 82 | struct asm9260_wdt_priv *priv = watchdog_get_drvdata(wdd); |
| 83 | u32 counter; |
| 84 | |
| 85 | counter = ioread32(priv->iobase + HW_WDTV); |
| 86 | |
| 87 | return DIV_ROUND_CLOSEST(counter, priv->wdt_freq); |
| 88 | } |
| 89 | |
| 90 | static int asm9260_wdt_updatetimeout(struct watchdog_device *wdd) |
| 91 | { |
| 92 | struct asm9260_wdt_priv *priv = watchdog_get_drvdata(wdd); |
| 93 | u32 counter; |
| 94 | |
| 95 | counter = wdd->timeout * priv->wdt_freq; |
| 96 | |
| 97 | iowrite32(counter, priv->iobase + HW_WDTC); |
| 98 | |
| 99 | return 0; |
| 100 | } |
| 101 | |
| 102 | static int asm9260_wdt_enable(struct watchdog_device *wdd) |
| 103 | { |
| 104 | struct asm9260_wdt_priv *priv = watchdog_get_drvdata(wdd); |
| 105 | u32 mode = 0; |
| 106 | |
| 107 | if (priv->mode == HW_RESET) |
| 108 | mode = BM_MOD_WDRESET; |
| 109 | |
| 110 | iowrite32(BM_MOD_WDEN | mode, priv->iobase + HW_WDMOD); |
| 111 | |
| 112 | asm9260_wdt_updatetimeout(wdd); |
| 113 | |
| 114 | asm9260_wdt_feed(wdd); |
| 115 | |
| 116 | return 0; |
| 117 | } |
| 118 | |
| 119 | static int asm9260_wdt_disable(struct watchdog_device *wdd) |
| 120 | { |
| 121 | struct asm9260_wdt_priv *priv = watchdog_get_drvdata(wdd); |
| 122 | |
| 123 | /* The only way to disable WD is to reset it. */ |
| 124 | reset_control_assert(priv->rst); |
| 125 | reset_control_deassert(priv->rst); |
| 126 | |
| 127 | return 0; |
| 128 | } |
| 129 | |
| 130 | static int asm9260_wdt_settimeout(struct watchdog_device *wdd, unsigned int to) |
| 131 | { |
| 132 | wdd->timeout = to; |
| 133 | asm9260_wdt_updatetimeout(wdd); |
| 134 | |
| 135 | return 0; |
| 136 | } |
| 137 | |
| 138 | static void asm9260_wdt_sys_reset(struct asm9260_wdt_priv *priv) |
| 139 | { |
| 140 | /* init WD if it was not started */ |
| 141 | |
| 142 | iowrite32(BM_MOD_WDEN | BM_MOD_WDRESET, priv->iobase + HW_WDMOD); |
| 143 | |
| 144 | iowrite32(0xff, priv->iobase + HW_WDTC); |
| 145 | /* first pass correct sequence */ |
| 146 | asm9260_wdt_feed(&priv->wdd); |
| 147 | /* |
| 148 | * Then write wrong pattern to the feed to trigger reset |
| 149 | * ASAP. |
| 150 | */ |
| 151 | iowrite32(0xff, priv->iobase + HW_WDFEED); |
| 152 | |
| 153 | mdelay(1000); |
| 154 | } |
| 155 | |
| 156 | static irqreturn_t asm9260_wdt_irq(int irq, void *devid) |
| 157 | { |
| 158 | struct asm9260_wdt_priv *priv = devid; |
| 159 | u32 stat; |
| 160 | |
| 161 | stat = ioread32(priv->iobase + HW_WDMOD); |
| 162 | if (!(stat & BM_MOD_WDINT)) |
| 163 | return IRQ_NONE; |
| 164 | |
| 165 | if (priv->mode == DEBUG) { |
| 166 | dev_info(priv->dev, "Watchdog Timeout. Do nothing.\n"); |
| 167 | } else { |
| 168 | dev_info(priv->dev, "Watchdog Timeout. Doing SW Reset.\n"); |
| 169 | asm9260_wdt_sys_reset(priv); |
| 170 | } |
| 171 | |
| 172 | return IRQ_HANDLED; |
| 173 | } |
| 174 | |
| 175 | static int asm9260_restart_handler(struct notifier_block *this, |
| 176 | unsigned long mode, void *cmd) |
| 177 | { |
| 178 | struct asm9260_wdt_priv *priv = |
| 179 | container_of(this, struct asm9260_wdt_priv, restart_handler); |
| 180 | |
| 181 | asm9260_wdt_sys_reset(priv); |
| 182 | |
| 183 | return NOTIFY_DONE; |
| 184 | } |
| 185 | |
| 186 | static const struct watchdog_info asm9260_wdt_ident = { |
| 187 | .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
| 188 | | WDIOF_MAGICCLOSE, |
| 189 | .identity = "Alphascale asm9260 Watchdog", |
| 190 | }; |
| 191 | |
| 192 | static struct watchdog_ops asm9260_wdt_ops = { |
| 193 | .owner = THIS_MODULE, |
| 194 | .start = asm9260_wdt_enable, |
| 195 | .stop = asm9260_wdt_disable, |
| 196 | .get_timeleft = asm9260_wdt_gettimeleft, |
| 197 | .ping = asm9260_wdt_feed, |
| 198 | .set_timeout = asm9260_wdt_settimeout, |
| 199 | }; |
| 200 | |
Arnd Bergmann | ac36856 | 2016-01-08 11:59:34 +0100 | [diff] [blame] | 201 | static int asm9260_wdt_get_dt_clks(struct asm9260_wdt_priv *priv) |
Oleksij Rempel | aae03dc | 2015-11-25 20:33:22 +0100 | [diff] [blame] | 202 | { |
| 203 | int err; |
| 204 | unsigned long clk; |
| 205 | |
| 206 | priv->clk = devm_clk_get(priv->dev, "mod"); |
| 207 | if (IS_ERR(priv->clk)) { |
| 208 | dev_err(priv->dev, "Failed to get \"mod\" clk\n"); |
| 209 | return PTR_ERR(priv->clk); |
| 210 | } |
| 211 | |
| 212 | /* configure AHB clock */ |
| 213 | priv->clk_ahb = devm_clk_get(priv->dev, "ahb"); |
| 214 | if (IS_ERR(priv->clk_ahb)) { |
| 215 | dev_err(priv->dev, "Failed to get \"ahb\" clk\n"); |
| 216 | return PTR_ERR(priv->clk_ahb); |
| 217 | } |
| 218 | |
| 219 | err = clk_prepare_enable(priv->clk_ahb); |
| 220 | if (err) { |
| 221 | dev_err(priv->dev, "Failed to enable ahb_clk!\n"); |
| 222 | return err; |
| 223 | } |
| 224 | |
| 225 | err = clk_set_rate(priv->clk, CLOCK_FREQ); |
| 226 | if (err) { |
| 227 | clk_disable_unprepare(priv->clk_ahb); |
| 228 | dev_err(priv->dev, "Failed to set rate!\n"); |
| 229 | return err; |
| 230 | } |
| 231 | |
| 232 | err = clk_prepare_enable(priv->clk); |
| 233 | if (err) { |
| 234 | clk_disable_unprepare(priv->clk_ahb); |
| 235 | dev_err(priv->dev, "Failed to enable clk!\n"); |
| 236 | return err; |
| 237 | } |
| 238 | |
| 239 | /* wdt has internal divider */ |
| 240 | clk = clk_get_rate(priv->clk); |
| 241 | if (!clk) { |
| 242 | clk_disable_unprepare(priv->clk); |
| 243 | clk_disable_unprepare(priv->clk_ahb); |
| 244 | dev_err(priv->dev, "Failed, clk is 0!\n"); |
| 245 | return -EINVAL; |
| 246 | } |
| 247 | |
| 248 | priv->wdt_freq = clk / 2; |
| 249 | |
| 250 | return 0; |
| 251 | } |
| 252 | |
Arnd Bergmann | ac36856 | 2016-01-08 11:59:34 +0100 | [diff] [blame] | 253 | static void asm9260_wdt_get_dt_mode(struct asm9260_wdt_priv *priv) |
Oleksij Rempel | aae03dc | 2015-11-25 20:33:22 +0100 | [diff] [blame] | 254 | { |
| 255 | const char *tmp; |
| 256 | int ret; |
| 257 | |
| 258 | /* default mode */ |
| 259 | priv->mode = HW_RESET; |
| 260 | |
| 261 | ret = of_property_read_string(priv->dev->of_node, |
| 262 | "alphascale,mode", &tmp); |
| 263 | if (ret < 0) |
| 264 | return; |
| 265 | |
| 266 | if (!strcmp(tmp, "hw")) |
| 267 | priv->mode = HW_RESET; |
| 268 | else if (!strcmp(tmp, "sw")) |
| 269 | priv->mode = SW_RESET; |
| 270 | else if (!strcmp(tmp, "debug")) |
| 271 | priv->mode = DEBUG; |
| 272 | else |
| 273 | dev_warn(priv->dev, "unknown reset-type: %s. Using default \"hw\" mode.", |
| 274 | tmp); |
| 275 | } |
| 276 | |
Arnd Bergmann | ac36856 | 2016-01-08 11:59:34 +0100 | [diff] [blame] | 277 | static int asm9260_wdt_probe(struct platform_device *pdev) |
Oleksij Rempel | aae03dc | 2015-11-25 20:33:22 +0100 | [diff] [blame] | 278 | { |
| 279 | struct asm9260_wdt_priv *priv; |
| 280 | struct watchdog_device *wdd; |
| 281 | struct resource *res; |
| 282 | int ret; |
| 283 | const char * const mode_name[] = { "hw", "sw", "debug", }; |
| 284 | |
| 285 | priv = devm_kzalloc(&pdev->dev, sizeof(struct asm9260_wdt_priv), |
| 286 | GFP_KERNEL); |
| 287 | if (!priv) |
| 288 | return -ENOMEM; |
| 289 | |
| 290 | priv->dev = &pdev->dev; |
| 291 | |
| 292 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| 293 | priv->iobase = devm_ioremap_resource(&pdev->dev, res); |
| 294 | if (IS_ERR(priv->iobase)) |
| 295 | return PTR_ERR(priv->iobase); |
| 296 | |
| 297 | ret = asm9260_wdt_get_dt_clks(priv); |
| 298 | if (ret) |
| 299 | return ret; |
| 300 | |
| 301 | priv->rst = devm_reset_control_get(&pdev->dev, "wdt_rst"); |
| 302 | if (IS_ERR(priv->rst)) |
| 303 | return PTR_ERR(priv->rst); |
| 304 | |
| 305 | wdd = &priv->wdd; |
| 306 | wdd->info = &asm9260_wdt_ident; |
| 307 | wdd->ops = &asm9260_wdt_ops; |
| 308 | wdd->min_timeout = 1; |
| 309 | wdd->max_timeout = BM_WDTC_MAX(priv->wdt_freq); |
| 310 | wdd->parent = &pdev->dev; |
| 311 | |
| 312 | watchdog_set_drvdata(wdd, priv); |
| 313 | |
| 314 | /* |
| 315 | * If 'timeout-sec' unspecified in devicetree, assume a 30 second |
| 316 | * default, unless the max timeout is less than 30 seconds, then use |
| 317 | * the max instead. |
| 318 | */ |
| 319 | wdd->timeout = ASM9260_WDT_DEFAULT_TIMEOUT; |
| 320 | watchdog_init_timeout(wdd, 0, &pdev->dev); |
| 321 | |
| 322 | asm9260_wdt_get_dt_mode(priv); |
| 323 | |
| 324 | if (priv->mode != HW_RESET) |
| 325 | priv->irq = platform_get_irq(pdev, 0); |
| 326 | |
| 327 | if (priv->irq > 0) { |
| 328 | /* |
| 329 | * Not all supported platforms specify an interrupt for the |
| 330 | * watchdog, so let's make it optional. |
| 331 | */ |
| 332 | ret = devm_request_irq(&pdev->dev, priv->irq, |
| 333 | asm9260_wdt_irq, 0, pdev->name, priv); |
| 334 | if (ret < 0) |
| 335 | dev_warn(&pdev->dev, "failed to request IRQ\n"); |
| 336 | } |
| 337 | |
| 338 | ret = watchdog_register_device(wdd); |
| 339 | if (ret) |
| 340 | goto clk_off; |
| 341 | |
| 342 | platform_set_drvdata(pdev, priv); |
| 343 | |
| 344 | priv->restart_handler.notifier_call = asm9260_restart_handler; |
| 345 | priv->restart_handler.priority = 128; |
| 346 | ret = register_restart_handler(&priv->restart_handler); |
| 347 | if (ret) |
| 348 | dev_warn(&pdev->dev, "cannot register restart handler\n"); |
| 349 | |
| 350 | dev_info(&pdev->dev, "Watchdog enabled (timeout: %d sec, mode: %s)\n", |
| 351 | wdd->timeout, mode_name[priv->mode]); |
| 352 | return 0; |
| 353 | |
| 354 | clk_off: |
| 355 | clk_disable_unprepare(priv->clk); |
| 356 | clk_disable_unprepare(priv->clk_ahb); |
| 357 | return ret; |
| 358 | } |
| 359 | |
| 360 | static void asm9260_wdt_shutdown(struct platform_device *pdev) |
| 361 | { |
| 362 | struct asm9260_wdt_priv *priv = platform_get_drvdata(pdev); |
| 363 | |
| 364 | asm9260_wdt_disable(&priv->wdd); |
| 365 | } |
| 366 | |
Arnd Bergmann | ac36856 | 2016-01-08 11:59:34 +0100 | [diff] [blame] | 367 | static int asm9260_wdt_remove(struct platform_device *pdev) |
Oleksij Rempel | aae03dc | 2015-11-25 20:33:22 +0100 | [diff] [blame] | 368 | { |
| 369 | struct asm9260_wdt_priv *priv = platform_get_drvdata(pdev); |
| 370 | |
| 371 | asm9260_wdt_disable(&priv->wdd); |
| 372 | |
| 373 | unregister_restart_handler(&priv->restart_handler); |
| 374 | |
| 375 | watchdog_unregister_device(&priv->wdd); |
| 376 | |
| 377 | clk_disable_unprepare(priv->clk); |
| 378 | clk_disable_unprepare(priv->clk_ahb); |
| 379 | |
| 380 | return 0; |
| 381 | } |
| 382 | |
| 383 | static const struct of_device_id asm9260_wdt_of_match[] = { |
| 384 | { .compatible = "alphascale,asm9260-wdt"}, |
| 385 | {}, |
| 386 | }; |
| 387 | MODULE_DEVICE_TABLE(of, asm9260_wdt_of_match); |
| 388 | |
| 389 | static struct platform_driver asm9260_wdt_driver = { |
| 390 | .driver = { |
| 391 | .name = "asm9260-wdt", |
Oleksij Rempel | aae03dc | 2015-11-25 20:33:22 +0100 | [diff] [blame] | 392 | .of_match_table = asm9260_wdt_of_match, |
| 393 | }, |
| 394 | .probe = asm9260_wdt_probe, |
| 395 | .remove = asm9260_wdt_remove, |
| 396 | .shutdown = asm9260_wdt_shutdown, |
| 397 | }; |
| 398 | module_platform_driver(asm9260_wdt_driver); |
| 399 | |
| 400 | MODULE_DESCRIPTION("asm9260 WatchDog Timer Driver"); |
| 401 | MODULE_AUTHOR("Oleksij Rempel <linux@rempel-privat.de>"); |
| 402 | MODULE_LICENSE("GPL"); |