Renaud Cerrato | 18cb636 | 2013-07-03 15:08:01 -0700 | [diff] [blame] | 1 | /* |
| 2 | * An I2C driver for the NXP PCF2127 RTC |
| 3 | * Copyright 2013 Til-Technologies |
| 4 | * |
| 5 | * Author: Renaud Cerrato <r.cerrato@til-technologies.fr> |
| 6 | * |
| 7 | * based on the other drivers in this same directory. |
| 8 | * |
| 9 | * http://www.nxp.com/documents/data_sheet/PCF2127AT.pdf |
| 10 | * |
| 11 | * This program is free software; you can redistribute it and/or modify |
| 12 | * it under the terms of the GNU General Public License version 2 as |
| 13 | * published by the Free Software Foundation. |
| 14 | */ |
| 15 | |
| 16 | #include <linux/i2c.h> |
| 17 | #include <linux/bcd.h> |
| 18 | #include <linux/rtc.h> |
| 19 | #include <linux/slab.h> |
| 20 | #include <linux/module.h> |
| 21 | #include <linux/of.h> |
| 22 | |
| 23 | #define DRV_VERSION "0.0.1" |
| 24 | |
| 25 | #define PCF2127_REG_CTRL1 (0x00) /* Control Register 1 */ |
| 26 | #define PCF2127_REG_CTRL2 (0x01) /* Control Register 2 */ |
| 27 | #define PCF2127_REG_CTRL3 (0x02) /* Control Register 3 */ |
| 28 | #define PCF2127_REG_SC (0x03) /* datetime */ |
| 29 | #define PCF2127_REG_MN (0x04) |
| 30 | #define PCF2127_REG_HR (0x05) |
| 31 | #define PCF2127_REG_DM (0x06) |
| 32 | #define PCF2127_REG_DW (0x07) |
| 33 | #define PCF2127_REG_MO (0x08) |
| 34 | #define PCF2127_REG_YR (0x09) |
| 35 | |
| 36 | static struct i2c_driver pcf2127_driver; |
| 37 | |
| 38 | struct pcf2127 { |
| 39 | struct rtc_device *rtc; |
| 40 | int voltage_low; /* indicates if a low_voltage was detected */ |
| 41 | }; |
| 42 | |
| 43 | /* |
| 44 | * In the routines that deal directly with the pcf2127 hardware, we use |
| 45 | * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch. |
| 46 | */ |
| 47 | static int pcf2127_get_datetime(struct i2c_client *client, struct rtc_time *tm) |
| 48 | { |
| 49 | struct pcf2127 *pcf2127 = i2c_get_clientdata(client); |
| 50 | unsigned char buf[10] = { PCF2127_REG_CTRL1 }; |
| 51 | |
| 52 | /* read registers */ |
| 53 | if (i2c_master_send(client, buf, 1) != 1 || |
| 54 | i2c_master_recv(client, buf, sizeof(buf)) != sizeof(buf)) { |
| 55 | dev_err(&client->dev, "%s: read error\n", __func__); |
| 56 | return -EIO; |
| 57 | } |
| 58 | |
| 59 | if (buf[PCF2127_REG_CTRL3] & 0x04) { |
| 60 | pcf2127->voltage_low = 1; |
| 61 | dev_info(&client->dev, |
| 62 | "low voltage detected, date/time is not reliable.\n"); |
| 63 | } |
| 64 | |
| 65 | dev_dbg(&client->dev, |
| 66 | "%s: raw data is cr1=%02x, cr2=%02x, cr3=%02x, " |
| 67 | "sec=%02x, min=%02x, hr=%02x, " |
| 68 | "mday=%02x, wday=%02x, mon=%02x, year=%02x\n", |
| 69 | __func__, |
| 70 | buf[0], buf[1], buf[2], |
| 71 | buf[3], buf[4], buf[5], |
| 72 | buf[6], buf[7], buf[8], buf[9]); |
| 73 | |
| 74 | |
| 75 | tm->tm_sec = bcd2bin(buf[PCF2127_REG_SC] & 0x7F); |
| 76 | tm->tm_min = bcd2bin(buf[PCF2127_REG_MN] & 0x7F); |
| 77 | tm->tm_hour = bcd2bin(buf[PCF2127_REG_HR] & 0x3F); /* rtc hr 0-23 */ |
| 78 | tm->tm_mday = bcd2bin(buf[PCF2127_REG_DM] & 0x3F); |
| 79 | tm->tm_wday = buf[PCF2127_REG_DW] & 0x07; |
| 80 | tm->tm_mon = bcd2bin(buf[PCF2127_REG_MO] & 0x1F) - 1; /* rtc mn 1-12 */ |
| 81 | tm->tm_year = bcd2bin(buf[PCF2127_REG_YR]); |
| 82 | if (tm->tm_year < 70) |
| 83 | tm->tm_year += 100; /* assume we are in 1970...2069 */ |
| 84 | |
| 85 | dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, " |
| 86 | "mday=%d, mon=%d, year=%d, wday=%d\n", |
| 87 | __func__, |
| 88 | tm->tm_sec, tm->tm_min, tm->tm_hour, |
| 89 | tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); |
| 90 | |
| 91 | /* the clock can give out invalid datetime, but we cannot return |
| 92 | * -EINVAL otherwise hwclock will refuse to set the time on bootup. |
| 93 | */ |
| 94 | if (rtc_valid_tm(tm) < 0) |
| 95 | dev_err(&client->dev, "retrieved date/time is not valid.\n"); |
| 96 | |
| 97 | return 0; |
| 98 | } |
| 99 | |
| 100 | static int pcf2127_set_datetime(struct i2c_client *client, struct rtc_time *tm) |
| 101 | { |
| 102 | unsigned char buf[8]; |
| 103 | int i = 0, err; |
| 104 | |
| 105 | dev_dbg(&client->dev, "%s: secs=%d, mins=%d, hours=%d, " |
| 106 | "mday=%d, mon=%d, year=%d, wday=%d\n", |
| 107 | __func__, |
| 108 | tm->tm_sec, tm->tm_min, tm->tm_hour, |
| 109 | tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); |
| 110 | |
| 111 | /* start register address */ |
| 112 | buf[i++] = PCF2127_REG_SC; |
| 113 | |
| 114 | /* hours, minutes and seconds */ |
| 115 | buf[i++] = bin2bcd(tm->tm_sec); |
| 116 | buf[i++] = bin2bcd(tm->tm_min); |
| 117 | buf[i++] = bin2bcd(tm->tm_hour); |
| 118 | buf[i++] = bin2bcd(tm->tm_mday); |
| 119 | buf[i++] = tm->tm_wday & 0x07; |
| 120 | |
| 121 | /* month, 1 - 12 */ |
| 122 | buf[i++] = bin2bcd(tm->tm_mon + 1); |
| 123 | |
| 124 | /* year */ |
| 125 | buf[i++] = bin2bcd(tm->tm_year % 100); |
| 126 | |
| 127 | /* write register's data */ |
| 128 | err = i2c_master_send(client, buf, i); |
| 129 | if (err != i) { |
| 130 | dev_err(&client->dev, |
| 131 | "%s: err=%d", __func__, err); |
| 132 | return -EIO; |
| 133 | } |
| 134 | |
| 135 | return 0; |
| 136 | } |
| 137 | |
| 138 | #ifdef CONFIG_RTC_INTF_DEV |
| 139 | static int pcf2127_rtc_ioctl(struct device *dev, |
| 140 | unsigned int cmd, unsigned long arg) |
| 141 | { |
| 142 | struct pcf2127 *pcf2127 = i2c_get_clientdata(to_i2c_client(dev)); |
| 143 | |
| 144 | switch (cmd) { |
| 145 | case RTC_VL_READ: |
| 146 | if (pcf2127->voltage_low) |
| 147 | dev_info(dev, "low voltage detected, date/time is not reliable.\n"); |
| 148 | |
| 149 | if (copy_to_user((void __user *)arg, &pcf2127->voltage_low, |
| 150 | sizeof(int))) |
| 151 | return -EFAULT; |
| 152 | return 0; |
| 153 | default: |
| 154 | return -ENOIOCTLCMD; |
| 155 | } |
| 156 | } |
| 157 | #else |
| 158 | #define pcf2127_rtc_ioctl NULL |
| 159 | #endif |
| 160 | |
| 161 | static int pcf2127_rtc_read_time(struct device *dev, struct rtc_time *tm) |
| 162 | { |
| 163 | return pcf2127_get_datetime(to_i2c_client(dev), tm); |
| 164 | } |
| 165 | |
| 166 | static int pcf2127_rtc_set_time(struct device *dev, struct rtc_time *tm) |
| 167 | { |
| 168 | return pcf2127_set_datetime(to_i2c_client(dev), tm); |
| 169 | } |
| 170 | |
| 171 | static const struct rtc_class_ops pcf2127_rtc_ops = { |
| 172 | .ioctl = pcf2127_rtc_ioctl, |
| 173 | .read_time = pcf2127_rtc_read_time, |
| 174 | .set_time = pcf2127_rtc_set_time, |
| 175 | }; |
| 176 | |
| 177 | static int pcf2127_probe(struct i2c_client *client, |
| 178 | const struct i2c_device_id *id) |
| 179 | { |
| 180 | struct pcf2127 *pcf2127; |
| 181 | |
| 182 | dev_dbg(&client->dev, "%s\n", __func__); |
| 183 | |
| 184 | if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) |
| 185 | return -ENODEV; |
| 186 | |
| 187 | pcf2127 = devm_kzalloc(&client->dev, sizeof(struct pcf2127), |
| 188 | GFP_KERNEL); |
| 189 | if (!pcf2127) |
| 190 | return -ENOMEM; |
| 191 | |
| 192 | dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n"); |
| 193 | |
| 194 | i2c_set_clientdata(client, pcf2127); |
| 195 | |
| 196 | pcf2127->rtc = devm_rtc_device_register(&client->dev, |
| 197 | pcf2127_driver.driver.name, |
| 198 | &pcf2127_rtc_ops, THIS_MODULE); |
| 199 | |
| 200 | if (IS_ERR(pcf2127->rtc)) |
| 201 | return PTR_ERR(pcf2127->rtc); |
| 202 | |
| 203 | return 0; |
| 204 | } |
| 205 | |
Renaud Cerrato | 18cb636 | 2013-07-03 15:08:01 -0700 | [diff] [blame] | 206 | static const struct i2c_device_id pcf2127_id[] = { |
| 207 | { "pcf2127", 0 }, |
| 208 | { } |
| 209 | }; |
| 210 | MODULE_DEVICE_TABLE(i2c, pcf2127_id); |
| 211 | |
| 212 | #ifdef CONFIG_OF |
| 213 | static const struct of_device_id pcf2127_of_match[] = { |
| 214 | { .compatible = "nxp,pcf2127" }, |
| 215 | {} |
| 216 | }; |
| 217 | MODULE_DEVICE_TABLE(of, pcf2127_of_match); |
| 218 | #endif |
| 219 | |
| 220 | static struct i2c_driver pcf2127_driver = { |
| 221 | .driver = { |
| 222 | .name = "rtc-pcf2127", |
| 223 | .owner = THIS_MODULE, |
| 224 | .of_match_table = of_match_ptr(pcf2127_of_match), |
| 225 | }, |
| 226 | .probe = pcf2127_probe, |
Renaud Cerrato | 18cb636 | 2013-07-03 15:08:01 -0700 | [diff] [blame] | 227 | .id_table = pcf2127_id, |
| 228 | }; |
| 229 | |
| 230 | module_i2c_driver(pcf2127_driver); |
| 231 | |
| 232 | MODULE_AUTHOR("Renaud Cerrato <r.cerrato@til-technologies.fr>"); |
| 233 | MODULE_DESCRIPTION("NXP PCF2127 RTC driver"); |
| 234 | MODULE_LICENSE("GPL"); |
| 235 | MODULE_VERSION(DRV_VERSION); |