David Brownell | a9c5fff | 2008-02-04 22:28:17 -0800 | [diff] [blame] | 1 | # |
Linus Walleij | e849dc0 | 2011-05-20 00:40:19 -0600 | [diff] [blame] | 2 | # GPIO infrastructure and drivers |
David Brownell | a9c5fff | 2008-02-04 22:28:17 -0800 | [diff] [blame] | 3 | # |
| 4 | |
Mark Brown | 7563bbf | 2012-04-15 10:52:54 +0100 | [diff] [blame] | 5 | config ARCH_HAVE_CUSTOM_GPIO_H |
| 6 | bool |
| 7 | help |
| 8 | Selecting this config option from the architecture Kconfig allows |
| 9 | the architecture to provide a custom asm/gpio.h implementation |
| 10 | overriding the default implementations. New uses of this are |
| 11 | strongly discouraged. |
| 12 | |
Michael Buesch | 7444a72 | 2008-07-25 01:46:11 -0700 | [diff] [blame] | 13 | config ARCH_WANT_OPTIONAL_GPIOLIB |
David Brownell | a9c5fff | 2008-02-04 22:28:17 -0800 | [diff] [blame] | 14 | bool |
| 15 | help |
Michael Buesch | 7444a72 | 2008-07-25 01:46:11 -0700 | [diff] [blame] | 16 | Select this config option from the architecture Kconfig, if |
| 17 | it is possible to use gpiolib on the architecture, but let the |
| 18 | user decide whether to actually build it or not. |
| 19 | Select this instead of ARCH_REQUIRE_GPIOLIB, if your architecture does |
| 20 | not depend on GPIOs being available, but rather let the user |
| 21 | decide whether he needs it or not. |
| 22 | |
| 23 | config ARCH_REQUIRE_GPIOLIB |
| 24 | bool |
| 25 | select GPIOLIB |
| 26 | help |
David Brownell | a9c5fff | 2008-02-04 22:28:17 -0800 | [diff] [blame] | 27 | Platforms select gpiolib if they use this infrastructure |
| 28 | for all their GPIOs, usually starting with ones integrated |
| 29 | into SOC processors. |
Michael Buesch | 7444a72 | 2008-07-25 01:46:11 -0700 | [diff] [blame] | 30 | Selecting this from the architecture code will cause the gpiolib |
| 31 | code to always get built in. |
David Brownell | a9c5fff | 2008-02-04 22:28:17 -0800 | [diff] [blame] | 32 | |
Shawn Guo | 6a89a31 | 2013-01-18 15:57:46 +0800 | [diff] [blame] | 33 | config GPIO_DEVRES |
| 34 | def_bool y |
| 35 | depends on HAS_IOMEM |
Michael Buesch | 7444a72 | 2008-07-25 01:46:11 -0700 | [diff] [blame] | 36 | |
| 37 | |
| 38 | menuconfig GPIOLIB |
| 39 | bool "GPIO Support" |
| 40 | depends on ARCH_WANT_OPTIONAL_GPIOLIB || ARCH_REQUIRE_GPIOLIB |
Michael Buesch | 7444a72 | 2008-07-25 01:46:11 -0700 | [diff] [blame] | 41 | help |
| 42 | This enables GPIO support through the generic GPIO library. |
| 43 | You only need to enable this, if you also want to enable |
Linus Walleij | e849dc0 | 2011-05-20 00:40:19 -0600 | [diff] [blame] | 44 | one or more of the GPIO drivers below. |
Michael Buesch | 7444a72 | 2008-07-25 01:46:11 -0700 | [diff] [blame] | 45 | |
| 46 | If unsure, say N. |
| 47 | |
| 48 | if GPIOLIB |
David Brownell | a9c5fff | 2008-02-04 22:28:17 -0800 | [diff] [blame] | 49 | |
Grant Likely | f141ed6 | 2012-04-07 14:31:33 -0600 | [diff] [blame] | 50 | config OF_GPIO |
| 51 | def_bool y |
David S. Miller | afe760e | 2012-11-06 15:33:33 -0800 | [diff] [blame] | 52 | depends on OF |
Grant Likely | f141ed6 | 2012-04-07 14:31:33 -0600 | [diff] [blame] | 53 | |
Mathias Nyman | e29482e | 2012-11-30 12:37:36 +0100 | [diff] [blame] | 54 | config GPIO_ACPI |
| 55 | def_bool y |
| 56 | depends on ACPI |
| 57 | |
David Brownell | a9c5fff | 2008-02-04 22:28:17 -0800 | [diff] [blame] | 58 | config DEBUG_GPIO |
| 59 | bool "Debug GPIO calls" |
| 60 | depends on DEBUG_KERNEL |
| 61 | help |
| 62 | Say Y here to add some extra checks and diagnostics to GPIO calls. |
Matt LaPlante | 692105b | 2009-01-26 11:12:25 +0100 | [diff] [blame] | 63 | These checks help ensure that GPIOs have been properly initialized |
| 64 | before they are used, and that sleeping calls are not made from |
| 65 | non-sleeping contexts. They can make bitbanged serial protocols |
David Brownell | a9c5fff | 2008-02-04 22:28:17 -0800 | [diff] [blame] | 66 | slower. The diagnostics help catch the type of setup errors |
| 67 | that are most common when setting up new platforms or boards. |
| 68 | |
David Brownell | d8f388d | 2008-07-25 01:46:07 -0700 | [diff] [blame] | 69 | config GPIO_SYSFS |
| 70 | bool "/sys/class/gpio/... (sysfs interface)" |
Kees Cook | 4c0ea23 | 2013-01-16 18:53:32 -0800 | [diff] [blame] | 71 | depends on SYSFS |
David Brownell | d8f388d | 2008-07-25 01:46:07 -0700 | [diff] [blame] | 72 | help |
| 73 | Say Y here to add a sysfs interface for GPIOs. |
| 74 | |
| 75 | This is mostly useful to work around omissions in a system's |
| 76 | kernel support. Those are common in custom and semicustom |
| 77 | hardware assembled using standard kernels with a minimum of |
| 78 | custom patches. In those cases, userspace code may import |
| 79 | a given GPIO from the kernel, if no kernel driver requested it. |
| 80 | |
| 81 | Kernel drivers may also request that a particular GPIO be |
| 82 | exported to userspace; this can be useful when debugging. |
| 83 | |
Grant Likely | c103de2 | 2011-06-04 18:38:28 -0600 | [diff] [blame] | 84 | config GPIO_GENERIC |
| 85 | tristate |
| 86 | |
Linus Walleij | e849dc0 | 2011-05-20 00:40:19 -0600 | [diff] [blame] | 87 | # put drivers in the right section, in alphabetical order |
David Brownell | a9c5fff | 2008-02-04 22:28:17 -0800 | [diff] [blame] | 88 | |
ashishj3 | 07bfc91 | 2011-07-06 16:02:13 +0530 | [diff] [blame] | 89 | config GPIO_DA9052 |
| 90 | tristate "Dialog DA9052 GPIO" |
Axel Lin | 1c4fe3a | 2012-08-29 14:57:46 +0800 | [diff] [blame] | 91 | depends on PMIC_DA9052 |
ashishj3 | 07bfc91 | 2011-07-06 16:02:13 +0530 | [diff] [blame] | 92 | help |
| 93 | Say yes here to enable the GPIO driver for the DA9052 chip. |
| 94 | |
Ashish Jangam | 04ed427 | 2012-09-14 19:00:16 +0530 | [diff] [blame] | 95 | config GPIO_DA9055 |
| 96 | tristate "Dialog Semiconductor DA9055 GPIO" |
| 97 | depends on MFD_DA9055 |
| 98 | help |
| 99 | Say yes here to enable the GPIO driver for the DA9055 chip. |
| 100 | |
| 101 | The Dialog DA9055 PMIC chip has 3 GPIO pins that can be |
| 102 | be controller by this driver. |
| 103 | |
| 104 | If driver is built as a module it will be called gpio-da9055. |
| 105 | |
Wolfram Sang | e952805 | 2010-03-05 13:44:33 -0800 | [diff] [blame] | 106 | config GPIO_MAX730X |
| 107 | tristate |
| 108 | |
Linus Walleij | e849dc0 | 2011-05-20 00:40:19 -0600 | [diff] [blame] | 109 | comment "Memory mapped GPIO drivers:" |
John Linn | 0bcb606 | 2008-11-12 13:25:38 -0800 | [diff] [blame] | 110 | |
Alexander Shiyan | a3b8d4a | 2012-10-09 20:05:56 +0400 | [diff] [blame] | 111 | config GPIO_CLPS711X |
Alexander Shiyan | 55fe14a | 2013-04-26 19:47:28 +0400 | [diff] [blame] | 112 | tristate "CLPS711X GPIO support" |
Alexander Shiyan | a3b8d4a | 2012-10-09 20:05:56 +0400 | [diff] [blame] | 113 | depends on ARCH_CLPS711X |
Alexander Shiyan | 55fe14a | 2013-04-26 19:47:28 +0400 | [diff] [blame] | 114 | select GPIO_GENERIC |
| 115 | help |
| 116 | Say yes here to support GPIO on CLPS711X SoCs. |
Alexander Shiyan | a3b8d4a | 2012-10-09 20:05:56 +0400 | [diff] [blame] | 117 | |
Grant Likely | c103de2 | 2011-06-04 18:38:28 -0600 | [diff] [blame] | 118 | config GPIO_GENERIC_PLATFORM |
| 119 | tristate "Generic memory-mapped GPIO controller support (MMIO platform device)" |
| 120 | select GPIO_GENERIC |
Jamie Iles | 280df6b | 2011-05-20 00:40:19 -0600 | [diff] [blame] | 121 | help |
Grant Likely | c103de2 | 2011-06-04 18:38:28 -0600 | [diff] [blame] | 122 | Say yes here to support basic platform_device memory-mapped GPIO controllers. |
Anton Vorontsov | aeec56e | 2010-10-27 15:33:15 -0700 | [diff] [blame] | 123 | |
Denis Turischev | 9cc0cb3 | 2010-03-05 13:44:39 -0800 | [diff] [blame] | 124 | config GPIO_IT8761E |
| 125 | tristate "IT8761E GPIO support" |
Grant Likely | 265fe02 | 2012-01-11 11:03:41 -0700 | [diff] [blame] | 126 | depends on X86 # unconditional access to IO space. |
Denis Turischev | 9cc0cb3 | 2010-03-05 13:44:39 -0800 | [diff] [blame] | 127 | help |
| 128 | Say yes here to support GPIO functionality of IT8761E super I/O chip. |
| 129 | |
Magnus Damm | a07e103 | 2012-05-17 15:22:23 +0900 | [diff] [blame] | 130 | config GPIO_EM |
| 131 | tristate "Emma Mobile GPIO" |
| 132 | depends on ARM |
| 133 | help |
| 134 | Say yes here to support GPIO on Renesas Emma Mobile SoCs. |
| 135 | |
H Hartley Sweeten | c6b52c1 | 2011-06-01 10:09:19 -0700 | [diff] [blame] | 136 | config GPIO_EP93XX |
| 137 | def_bool y |
| 138 | depends on ARCH_EP93XX |
H Hartley Sweeten | 1e4c884 | 2011-06-08 14:35:33 -0700 | [diff] [blame] | 139 | select GPIO_GENERIC |
H Hartley Sweeten | c6b52c1 | 2011-06-01 10:09:19 -0700 | [diff] [blame] | 140 | |
John Crispin | 5238f7b | 2012-05-11 18:48:39 +0200 | [diff] [blame] | 141 | config GPIO_MM_LANTIQ |
| 142 | bool "Lantiq Memory mapped GPIOs" |
| 143 | depends on LANTIQ && SOC_XWAY |
| 144 | help |
| 145 | This enables support for memory mapped GPIOs on the External Bus Unit |
| 146 | (EBU) found on Lantiq SoCs. The gpios are output only as they are |
| 147 | created by attaching a 16bit latch to the bus. |
| 148 | |
Grant Likely | 6eae1ac | 2011-07-06 11:54:19 -0600 | [diff] [blame] | 149 | config GPIO_MPC5200 |
| 150 | def_bool y |
| 151 | depends on PPC_MPC52xx |
| 152 | |
Wolfram Sang | c68308d | 2011-09-21 12:49:20 +0200 | [diff] [blame] | 153 | config GPIO_MPC8XXX |
| 154 | bool "MPC512x/MPC8xxx GPIO support" |
| 155 | depends on PPC_MPC512x || PPC_MPC831x || PPC_MPC834x || PPC_MPC837x || \ |
| 156 | FSL_SOC_BOOKE || PPC_86xx |
| 157 | help |
| 158 | Say Y here if you're going to use hardware that connects to the |
| 159 | MPC512x/831x/834x/837x/8572/8610 GPIOs. |
| 160 | |
David Brown | 74d10d7 | 2011-05-16 13:57:39 -0700 | [diff] [blame] | 161 | config GPIO_MSM_V1 |
| 162 | tristate "Qualcomm MSM GPIO v1" |
Christian Dietrich | afcc0f8 | 2012-05-31 13:12:57 +0200 | [diff] [blame] | 163 | depends on GPIOLIB && ARCH_MSM && (ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50) |
David Brown | 74d10d7 | 2011-05-16 13:57:39 -0700 | [diff] [blame] | 164 | help |
| 165 | Say yes here to support the GPIO interface on ARM v6 based |
| 166 | Qualcomm MSM chips. Most of the pins on the MSM can be |
| 167 | selected for GPIO, and are controlled by this driver. |
| 168 | |
David Brown | 1a5ab4b | 2011-05-16 15:53:38 -0700 | [diff] [blame] | 169 | config GPIO_MSM_V2 |
| 170 | tristate "Qualcomm MSM GPIO v2" |
Rohit Vaswani | 43f6844 | 2013-06-10 15:50:21 -0700 | [diff] [blame] | 171 | depends on GPIOLIB && OF && ARCH_MSM |
David Brown | 1a5ab4b | 2011-05-16 15:53:38 -0700 | [diff] [blame] | 172 | help |
| 173 | Say yes here to support the GPIO interface on ARM v7 based |
| 174 | Qualcomm MSM chips. Most of the pins on the MSM can be |
| 175 | selected for GPIO, and are controlled by this driver. |
| 176 | |
Thomas Petazzoni | fefe7b0 | 2012-09-19 22:52:58 +0200 | [diff] [blame] | 177 | config GPIO_MVEBU |
| 178 | def_bool y |
Andrew Lunn | 49e928d | 2012-11-17 17:00:43 +0100 | [diff] [blame] | 179 | depends on PLAT_ORION |
Gregory CLEMENT | bc1008c | 2012-12-19 12:31:11 +0100 | [diff] [blame] | 180 | depends on OF |
Thomas Petazzoni | fefe7b0 | 2012-09-19 22:52:58 +0200 | [diff] [blame] | 181 | select GPIO_GENERIC |
| 182 | select GENERIC_IRQ_CHIP |
| 183 | |
Shawn Guo | d37a65b | 2011-06-06 00:07:54 +0800 | [diff] [blame] | 184 | config GPIO_MXC |
| 185 | def_bool y |
| 186 | depends on ARCH_MXC |
Grant Likely | c103de2 | 2011-06-04 18:38:28 -0600 | [diff] [blame] | 187 | select GPIO_GENERIC |
Shawn Guo | e4ea933 | 2011-06-07 16:25:37 +0800 | [diff] [blame] | 188 | select GENERIC_IRQ_CHIP |
Grant Likely | c103de2 | 2011-06-04 18:38:28 -0600 | [diff] [blame] | 189 | |
| 190 | config GPIO_MXS |
| 191 | def_bool y |
| 192 | depends on ARCH_MXS |
Shawn Guo | 06f88a8 | 2011-06-06 22:31:29 +0800 | [diff] [blame] | 193 | select GPIO_GENERIC |
Shawn Guo | 498c17c | 2011-06-07 22:00:54 +0800 | [diff] [blame] | 194 | select GENERIC_IRQ_CHIP |
Shawn Guo | d37a65b | 2011-06-06 00:07:54 +0800 | [diff] [blame] | 195 | |
Baruch Siach | 1e9c285 | 2009-06-18 16:48:58 -0700 | [diff] [blame] | 196 | config GPIO_PL061 |
| 197 | bool "PrimeCell PL061 GPIO support" |
Alessandro Rubini | 8618b3b | 2012-11-23 16:08:24 +0100 | [diff] [blame] | 198 | depends on ARM && ARM_AMBA |
Rob Herring | 3ab5247 | 2011-10-21 08:05:53 -0500 | [diff] [blame] | 199 | select GENERIC_IRQ_CHIP |
Baruch Siach | 1e9c285 | 2009-06-18 16:48:58 -0700 | [diff] [blame] | 200 | help |
| 201 | Say yes here to support the PrimeCell PL061 GPIO device |
| 202 | |
Haojian Zhuang | 157d264 | 2011-10-17 20:37:52 +0800 | [diff] [blame] | 203 | config GPIO_PXA |
| 204 | bool "PXA GPIO support" |
| 205 | depends on ARCH_PXA || ARCH_MMP |
| 206 | help |
| 207 | Say yes here to support the PXA GPIO device |
| 208 | |
Magnus Damm | 119f5e4 | 2013-03-13 20:32:13 +0900 | [diff] [blame] | 209 | config GPIO_RCAR |
| 210 | tristate "Renesas R-Car GPIO" |
| 211 | depends on ARM |
| 212 | help |
| 213 | Say yes here to support GPIO on Renesas R-Car SoCs. |
| 214 | |
Tomasz Figa | 880cf07 | 2013-06-19 01:22:20 +0900 | [diff] [blame] | 215 | config GPIO_SAMSUNG |
| 216 | bool |
| 217 | depends on PLAT_SAMSUNG |
| 218 | help |
| 219 | Legacy GPIO support. Use only for platforms without support for |
| 220 | pinctrl. |
| 221 | |
Shiraz Hashim | b53bc28 | 2012-11-16 10:45:25 +0530 | [diff] [blame] | 222 | config GPIO_SPEAR_SPICS |
| 223 | bool "ST SPEAr13xx SPI Chip Select as GPIO support" |
| 224 | depends on PLAT_SPEAR |
| 225 | select GENERIC_IRQ_CHIP |
| 226 | help |
| 227 | Say yes here to support ST SPEAr SPI Chip Select as GPIO device |
| 228 | |
Alessandro Rubini | 7b0d44f3 | 2012-04-12 10:48:55 +0200 | [diff] [blame] | 229 | config GPIO_STA2X11 |
| 230 | bool "STA2x11/ConneXt GPIO support" |
| 231 | depends on MFD_STA2X11 |
| 232 | select GENERIC_IRQ_CHIP |
| 233 | help |
| 234 | Say yes here to support the STA2x11/ConneXt GPIO device. |
| 235 | The GPIO module has 128 GPIO pins with alternate functions. |
| 236 | |
Vivien Didelot | 759f5f3 | 2012-12-07 21:36:34 -0500 | [diff] [blame] | 237 | config GPIO_TS5500 |
| 238 | tristate "TS-5500 DIO blocks and compatibles" |
| 239 | help |
| 240 | This driver supports Digital I/O exposed by pin blocks found on some |
| 241 | Technologic Systems platforms. It includes, but is not limited to, 3 |
| 242 | blocks of the TS-5500: DIO1, DIO2 and the LCD port, and the TS-5600 |
| 243 | LCD port. |
| 244 | |
James Hogan | 9caf1f2 | 2013-06-25 15:27:43 +0100 | [diff] [blame] | 245 | config GPIO_TZ1090 |
| 246 | bool "Toumaz Xenif TZ1090 GPIO support" |
| 247 | depends on SOC_TZ1090 |
James Hogan | 0477739 | 2013-06-25 15:27:45 +0100 | [diff] [blame] | 248 | select GENERIC_IRQ_CHIP |
James Hogan | 9caf1f2 | 2013-06-25 15:27:43 +0100 | [diff] [blame] | 249 | default y |
| 250 | help |
| 251 | Say yes here to support Toumaz Xenif TZ1090 GPIOs. |
| 252 | |
James Hogan | 79bb646 | 2013-06-25 15:27:44 +0100 | [diff] [blame] | 253 | config GPIO_TZ1090_PDC |
| 254 | bool "Toumaz Xenif TZ1090 PDC GPIO support" |
| 255 | depends on SOC_TZ1090 |
| 256 | default y |
| 257 | help |
| 258 | Say yes here to support Toumaz Xenif TZ1090 PDC GPIOs. |
| 259 | |
John Linn | 0bcb606 | 2008-11-12 13:25:38 -0800 | [diff] [blame] | 260 | config GPIO_XILINX |
| 261 | bool "Xilinx GPIO support" |
Michal Simek | 78c7d8d | 2013-06-03 14:31:20 +0200 | [diff] [blame] | 262 | depends on PPC_OF || MICROBLAZE || ARCH_ZYNQ |
John Linn | 0bcb606 | 2008-11-12 13:25:38 -0800 | [diff] [blame] | 263 | help |
| 264 | Say yes here to support the Xilinx FPGA GPIO device |
| 265 | |
Yoichi Yuasa | 27fdd32 | 2009-06-29 11:11:05 +0900 | [diff] [blame] | 266 | config GPIO_VR41XX |
| 267 | tristate "NEC VR4100 series General-purpose I/O Uint support" |
| 268 | depends on CPU_VR41XX |
| 269 | help |
| 270 | Say yes here to support the NEC VR4100 series General-purpose I/O Uint |
| 271 | |
Denis Turischev | be9b06b | 2010-03-02 10:48:55 +0100 | [diff] [blame] | 272 | config GPIO_SCH |
Seth Heasley | 77820ff | 2012-05-22 22:54:20 +0200 | [diff] [blame] | 273 | tristate "Intel SCH/TunnelCreek/Centerton GPIO" |
H Hartley Sweeten | 6cff9e2 | 2011-05-20 00:40:17 -0600 | [diff] [blame] | 274 | depends on PCI && X86 |
Randy Dunlap | 860fb8c | 2010-03-05 09:43:06 -0800 | [diff] [blame] | 275 | select MFD_CORE |
Denis Turischev | be9b06b | 2010-03-02 10:48:55 +0100 | [diff] [blame] | 276 | select LPC_SCH |
| 277 | help |
Seth Heasley | 77820ff | 2012-05-22 22:54:20 +0200 | [diff] [blame] | 278 | Say yes here to support GPIO interface on Intel Poulsbo SCH, |
| 279 | Intel Tunnel Creek processor or Intel Centerton processor. |
Denis Turischev | be9b06b | 2010-03-02 10:48:55 +0100 | [diff] [blame] | 280 | The Intel SCH contains a total of 14 GPIO pins. Ten GPIOs are |
| 281 | powered by the core power rail and are turned off during sleep |
| 282 | modes (S3 and higher). The remaining four GPIOs are powered by |
| 283 | the Intel SCH suspend power supply. These GPIOs remain |
| 284 | active during S3. The suspend powered GPIOs can be used to wake the |
| 285 | system from the Suspend-to-RAM state. |
Denis Turischev | f04ddfc | 2011-03-14 12:53:05 +0200 | [diff] [blame] | 286 | The Intel Tunnel Creek processor has 5 GPIOs powered by the |
| 287 | core power rail and 9 from suspend power supply. |
Seth Heasley | 77820ff | 2012-05-22 22:54:20 +0200 | [diff] [blame] | 288 | The Intel Centerton processor has a total of 30 GPIO pins. |
| 289 | Twenty-one are powered by the core power rail and 9 from the |
| 290 | suspend power supply. |
Denis Turischev | be9b06b | 2010-03-02 10:48:55 +0100 | [diff] [blame] | 291 | |
Peter Tyser | 6ed9f9c | 2012-04-18 09:48:24 -0500 | [diff] [blame] | 292 | config GPIO_ICH |
| 293 | tristate "Intel ICH GPIO" |
| 294 | depends on PCI && X86 |
| 295 | select MFD_CORE |
| 296 | select LPC_ICH |
| 297 | help |
| 298 | Say yes here to support the GPIO functionality of a number of Intel |
| 299 | ICH-based chipsets. Currently supported devices: ICH6, ICH7, ICH8 |
| 300 | ICH9, ICH10, Series 5/3400 (eg Ibex Peak), Series 6/C200 (eg |
| 301 | Cougar Point), NM10 (Tiger Point), and 3100 (Whitmore Lake). |
| 302 | |
| 303 | If unsure, say N. |
Denis Turischev | be9b06b | 2010-03-02 10:48:55 +0100 | [diff] [blame] | 304 | |
Daniel Drake | 99ea262 | 2010-09-30 21:55:48 +0100 | [diff] [blame] | 305 | config GPIO_VX855 |
| 306 | tristate "VIA VX855/VX875 GPIO" |
Heiko Carstens | 29bde2d | 2013-02-05 12:48:29 +0100 | [diff] [blame] | 307 | depends on PCI && GENERIC_HARDIRQS |
Daniel Drake | 99ea262 | 2010-09-30 21:55:48 +0100 | [diff] [blame] | 308 | select MFD_CORE |
| 309 | select MFD_VX855 |
| 310 | help |
| 311 | Support access to the VX855/VX875 GPIO lines through the gpio library. |
| 312 | |
| 313 | This driver provides common support for accessing the device, |
| 314 | additional drivers must be enabled in order to use the |
| 315 | functionality of the device. |
| 316 | |
Martyn Welch | 6518bb6 | 2012-03-12 17:12:58 +0000 | [diff] [blame] | 317 | config GPIO_GE_FPGA |
| 318 | bool "GE FPGA based GPIO" |
| 319 | depends on GE_FPGA |
| 320 | help |
| 321 | Support for common GPIO functionality provided on some GE Single Board |
| 322 | Computers. |
| 323 | |
| 324 | This driver provides basic support (configure as input or output, read |
| 325 | and write pin state) for GPIO implemented in a number of GE single |
| 326 | board computers. |
| 327 | |
Mathias Nyman | 1d09aaa | 2012-12-12 17:42:38 +0200 | [diff] [blame] | 328 | config GPIO_LYNXPOINT |
| 329 | bool "Intel Lynxpoint GPIO support" |
Mathias Nyman | 977d16b | 2013-03-08 14:38:12 +0200 | [diff] [blame] | 330 | depends on ACPI && X86 |
Mathias Nyman | 1d09aaa | 2012-12-12 17:42:38 +0200 | [diff] [blame] | 331 | select IRQ_DOMAIN |
| 332 | help |
| 333 | driver for GPIO functionality on Intel Lynxpoint PCH chipset |
| 334 | Requires ACPI device enumeration code to set up a platform device. |
| 335 | |
Andreas Larsson | ddb27f3 | 2013-04-17 14:36:50 +0200 | [diff] [blame] | 336 | config GPIO_GRGPIO |
| 337 | tristate "Aeroflex Gaisler GRGPIO support" |
| 338 | depends on OF |
| 339 | select GPIO_GENERIC |
| 340 | select IRQ_DOMAIN |
| 341 | help |
| 342 | Select this to support Aeroflex Gaisler GRGPIO cores from the GRLIB |
| 343 | VHDL IP core library. |
| 344 | |
David Brownell | a9c5fff | 2008-02-04 22:28:17 -0800 | [diff] [blame] | 345 | comment "I2C GPIO expanders:" |
| 346 | |
Mark Brown | 31ba56f | 2012-06-23 13:29:25 +0100 | [diff] [blame] | 347 | config GPIO_ARIZONA |
| 348 | tristate "Wolfson Microelectronics Arizona class devices" |
| 349 | depends on MFD_ARIZONA |
| 350 | help |
| 351 | Support for GPIOs on Wolfson Arizona class devices. |
| 352 | |
Wolfram Sang | e952805 | 2010-03-05 13:44:33 -0800 | [diff] [blame] | 353 | config GPIO_MAX7300 |
| 354 | tristate "Maxim MAX7300 GPIO expander" |
| 355 | depends on I2C |
| 356 | select GPIO_MAX730X |
| 357 | help |
Axel Lin | 2b861f4 | 2013-05-19 14:25:48 +0800 | [diff] [blame] | 358 | GPIO driver for Maxim MAX7300 I2C-based GPIO expander. |
Wolfram Sang | e952805 | 2010-03-05 13:44:33 -0800 | [diff] [blame] | 359 | |
Eric Miao | bbcd6d5 | 2008-07-25 01:46:14 -0700 | [diff] [blame] | 360 | config GPIO_MAX732X |
| 361 | tristate "MAX7319, MAX7320-7327 I2C Port Expanders" |
| 362 | depends on I2C |
| 363 | help |
| 364 | Say yes here to support the MAX7319, MAX7320-7327 series of I2C |
| 365 | Port Expanders. Each IO port on these chips has a fixed role of |
| 366 | Input (designated by 'I'), Push-Pull Output ('O'), or Open-Drain |
| 367 | Input and Output (designed by 'P'). The combinations are listed |
| 368 | below: |
| 369 | |
| 370 | 8 bits: max7319 (8I), max7320 (8O), max7321 (8P), |
| 371 | max7322 (4I4O), max7323 (4P4O) |
| 372 | |
| 373 | 16 bits: max7324 (8I8O), max7325 (8P8O), |
| 374 | max7326 (4I12O), max7327 (4P12O) |
| 375 | |
| 376 | Board setup code must specify the model to use, and the start |
| 377 | number for these GPIOs. |
| 378 | |
Marc Zyngier | a80a0bb | 2010-05-26 14:42:16 -0700 | [diff] [blame] | 379 | config GPIO_MAX732X_IRQ |
| 380 | bool "Interrupt controller support for MAX732x" |
| 381 | depends on GPIO_MAX732X=y && GENERIC_HARDIRQS |
| 382 | help |
| 383 | Say yes here to enable the max732x to be used as an interrupt |
| 384 | controller. It requires the driver to be built in the kernel. |
| 385 | |
wu guoxing | 608589b | 2012-01-30 14:31:20 +0800 | [diff] [blame] | 386 | config GPIO_MC9S08DZ60 |
| 387 | bool "MX35 3DS BOARD MC9S08DZ60 GPIO functions" |
Axel Lin | 4c30aa3 | 2012-08-29 09:35:24 +0800 | [diff] [blame] | 388 | depends on I2C=y && MACH_MX35_3DS |
wu guoxing | 608589b | 2012-01-30 14:31:20 +0800 | [diff] [blame] | 389 | help |
| 390 | Select this to enable the MC9S08DZ60 GPIO driver |
| 391 | |
Guennadi Liakhovetski | f3dc363 | 2008-02-06 01:39:03 -0800 | [diff] [blame] | 392 | config GPIO_PCA953X |
Axel Lin | c29985d | 2012-04-06 17:11:46 +0800 | [diff] [blame] | 393 | tristate "PCA953x, PCA955x, PCA957x, TCA64xx, and MAX7310 I/O ports" |
eric miao | 9e60fdc | 2008-02-04 22:28:26 -0800 | [diff] [blame] | 394 | depends on I2C |
| 395 | help |
David Brownell | 7059d4b | 2008-07-04 09:59:37 -0700 | [diff] [blame] | 396 | Say yes here to provide access to several register-oriented |
| 397 | SMBus I/O expanders, made mostly by NXP or TI. Compatible |
| 398 | models include: |
| 399 | |
| 400 | 4 bits: pca9536, pca9537 |
| 401 | |
Axel Lin | c29985d | 2012-04-06 17:11:46 +0800 | [diff] [blame] | 402 | 8 bits: max7310, max7315, pca6107, pca9534, pca9538, pca9554, |
| 403 | pca9556, pca9557, pca9574, tca6408 |
David Brownell | 7059d4b | 2008-07-04 09:59:37 -0700 | [diff] [blame] | 404 | |
Axel Lin | c29985d | 2012-04-06 17:11:46 +0800 | [diff] [blame] | 405 | 16 bits: max7312, max7313, pca9535, pca9539, pca9555, pca9575, |
| 406 | tca6416 |
eric miao | 9e60fdc | 2008-02-04 22:28:26 -0800 | [diff] [blame] | 407 | |
Marc Zyngier | 89ea8bb | 2010-03-05 13:44:36 -0800 | [diff] [blame] | 408 | config GPIO_PCA953X_IRQ |
| 409 | bool "Interrupt controller support for PCA953x" |
| 410 | depends on GPIO_PCA953X=y |
| 411 | help |
| 412 | Say yes here to enable the pca953x to be used as an interrupt |
| 413 | controller. It requires the driver to be built in the kernel. |
| 414 | |
David Brownell | 15fae37 | 2008-02-04 22:28:24 -0800 | [diff] [blame] | 415 | config GPIO_PCF857X |
David Brownell | 1673ad5 | 2008-07-21 14:21:34 -0700 | [diff] [blame] | 416 | tristate "PCF857x, PCA{85,96}7x, and MAX732[89] I2C GPIO expanders" |
David Brownell | 15fae37 | 2008-02-04 22:28:24 -0800 | [diff] [blame] | 417 | depends on I2C |
Arnd Bergmann | 901acf5 | 2012-09-28 23:36:15 +0200 | [diff] [blame] | 418 | select IRQ_DOMAIN |
David Brownell | 15fae37 | 2008-02-04 22:28:24 -0800 | [diff] [blame] | 419 | help |
| 420 | Say yes here to provide access to most "quasi-bidirectional" I2C |
| 421 | GPIO expanders used for additional digital outputs or inputs. |
| 422 | Most of these parts are from NXP, though TI is a second source for |
| 423 | some of them. Compatible models include: |
| 424 | |
| 425 | 8 bits: pcf8574, pcf8574a, pca8574, pca8574a, |
David Brownell | 1673ad5 | 2008-07-21 14:21:34 -0700 | [diff] [blame] | 426 | pca9670, pca9672, pca9674, pca9674a, |
| 427 | max7328, max7329 |
David Brownell | 15fae37 | 2008-02-04 22:28:24 -0800 | [diff] [blame] | 428 | |
| 429 | 16 bits: pcf8575, pcf8575c, pca8575, |
| 430 | pca9671, pca9673, pca9675 |
| 431 | |
| 432 | Your board setup code will need to declare the expanders in |
| 433 | use, and assign numbers to the GPIOs they expose. Those GPIOs |
| 434 | can then be used from drivers and other kernel code, just like |
| 435 | other GPIOs, but only accessible from task contexts. |
| 436 | |
| 437 | This driver provides an in-kernel interface to those GPIOs using |
| 438 | platform-neutral GPIO calls. |
| 439 | |
Laxman Dewangan | e9fe32b | 2012-05-14 12:46:12 +0530 | [diff] [blame] | 440 | config GPIO_RC5T583 |
| 441 | bool "RICOH RC5T583 GPIO" |
| 442 | depends on MFD_RC5T583 |
| 443 | help |
| 444 | Select this option to enable GPIO driver for the Ricoh RC5T583 |
| 445 | chip family. |
| 446 | This driver provides the support for driving/reading the gpio pins |
| 447 | of RC5T583 device through standard gpio library. |
| 448 | |
Gregory Bean | c34f16b | 2010-08-10 18:02:27 -0700 | [diff] [blame] | 449 | config GPIO_SX150X |
| 450 | bool "Semtech SX150x I2C GPIO expander" |
| 451 | depends on I2C=y |
| 452 | default n |
| 453 | help |
| 454 | Say yes here to provide support for Semtech SX150-series I2C |
| 455 | GPIO expanders. Compatible models include: |
| 456 | |
| 457 | 8 bits: sx1508q |
| 458 | 16 bits: sx1509q |
| 459 | |
Rabin Vincent | 03f822f | 2010-07-02 16:52:09 +0530 | [diff] [blame] | 460 | config GPIO_STMPE |
| 461 | bool "STMPE GPIOs" |
| 462 | depends on MFD_STMPE |
| 463 | help |
| 464 | This enables support for the GPIOs found on the STMPE I/O |
| 465 | Expanders. |
| 466 | |
John Crispin | 5238f7b | 2012-05-11 18:48:39 +0200 | [diff] [blame] | 467 | config GPIO_STP_XWAY |
| 468 | bool "XWAY STP GPIOs" |
| 469 | depends on SOC_XWAY |
| 470 | help |
| 471 | This enables support for the Serial To Parallel (STP) unit found on |
| 472 | XWAY SoC. The STP allows the SoC to drive a shift registers cascade, |
| 473 | that can be up to 24 bit. This peripheral is aimed at driving leds. |
| 474 | Some of the gpios/leds can be auto updated by the soc with dsl and |
| 475 | phy status. |
| 476 | |
Sundar Iyer | f4e8afd | 2010-12-13 09:33:13 +0530 | [diff] [blame] | 477 | config GPIO_TC3589X |
| 478 | bool "TC3589X GPIOs" |
| 479 | depends on MFD_TC3589X |
Rabin Vincent | d88b25b | 2010-05-10 23:43:47 +0200 | [diff] [blame] | 480 | help |
Sundar Iyer | f4e8afd | 2010-12-13 09:33:13 +0530 | [diff] [blame] | 481 | This enables support for the GPIOs found on the TC3589X |
Rabin Vincent | d88b25b | 2010-05-10 23:43:47 +0200 | [diff] [blame] | 482 | I/O Expander. |
| 483 | |
Margarita Olaya | 668a6cc | 2011-06-09 14:50:19 -0500 | [diff] [blame] | 484 | config GPIO_TPS65912 |
| 485 | tristate "TI TPS65912 GPIO" |
| 486 | depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI) |
| 487 | help |
| 488 | This driver supports TPS65912 gpio chip |
| 489 | |
David Brownell | e9d35947 | 2008-10-20 23:51:46 +0200 | [diff] [blame] | 490 | config GPIO_TWL4030 |
| 491 | tristate "TWL4030, TWL5030, and TPS659x0 GPIOs" |
| 492 | depends on TWL4030_CORE |
| 493 | help |
| 494 | Say yes here to access the GPIO signals of various multi-function |
| 495 | power management chips from Texas Instruments. |
| 496 | |
Peter Ujfalusi | 70ffd69 | 2012-08-16 15:13:15 +0300 | [diff] [blame] | 497 | config GPIO_TWL6040 |
| 498 | tristate "TWL6040 GPO" |
| 499 | depends on TWL6040_CORE |
| 500 | help |
| 501 | Say yes here to access the GPO signals of twl6040 |
| 502 | audio chip from Texas Instruments. |
| 503 | |
Mark Brown | e4b736f | 2009-07-27 14:46:00 +0100 | [diff] [blame] | 504 | config GPIO_WM831X |
| 505 | tristate "WM831x GPIOs" |
| 506 | depends on MFD_WM831X |
| 507 | help |
| 508 | Say yes here to access the GPIO signals of WM831x power management |
| 509 | chips from Wolfson Microelectronics. |
| 510 | |
Mark Brown | 38f6ce4 | 2010-01-07 16:10:08 +0000 | [diff] [blame] | 511 | config GPIO_WM8350 |
| 512 | tristate "WM8350 GPIOs" |
| 513 | depends on MFD_WM8350 |
| 514 | help |
| 515 | Say yes here to access the GPIO signals of WM8350 power management |
| 516 | chips from Wolfson Microelectronics. |
| 517 | |
Mark Brown | 2955c30 | 2010-01-29 18:20:30 +0000 | [diff] [blame] | 518 | config GPIO_WM8994 |
| 519 | tristate "WM8994 GPIOs" |
| 520 | depends on MFD_WM8994 |
| 521 | help |
| 522 | Say yes here to access the GPIO signals of WM8994 audio hub |
| 523 | CODECs from Wolfson Microelectronics. |
| 524 | |
Michael Hennerich | ef72af4 | 2009-09-22 16:46:39 -0700 | [diff] [blame] | 525 | config GPIO_ADP5520 |
| 526 | tristate "GPIO Support for ADP5520 PMIC" |
| 527 | depends on PMIC_ADP5520 |
| 528 | help |
| 529 | This option enables support for on-chip GPIO found |
| 530 | on Analog Devices ADP5520 PMICs. |
| 531 | |
Michael Hennerich | 8088409 | 2010-01-08 14:43:08 -0800 | [diff] [blame] | 532 | config GPIO_ADP5588 |
| 533 | tristate "ADP5588 I2C GPIO expander" |
| 534 | depends on I2C |
| 535 | help |
| 536 | This option enables support for 18 GPIOs found |
| 537 | on Analog Devices ADP5588 GPIO Expanders. |
Michael Hennerich | 8088409 | 2010-01-08 14:43:08 -0800 | [diff] [blame] | 538 | |
Michael Hennerich | 459773a | 2010-10-27 15:33:19 -0700 | [diff] [blame] | 539 | config GPIO_ADP5588_IRQ |
| 540 | bool "Interrupt controller support for ADP5588" |
| 541 | depends on GPIO_ADP5588=y |
| 542 | help |
| 543 | Say yes here to enable the adp5588 to be used as an interrupt |
| 544 | controller. It requires the driver to be built in the kernel. |
| 545 | |
Thierry Reding | 5e969a4 | 2012-09-18 10:57:10 +0200 | [diff] [blame] | 546 | config GPIO_ADNP |
| 547 | tristate "Avionic Design N-bit GPIO expander" |
Thierry Reding | cb144fe | 2012-11-01 11:22:11 +0100 | [diff] [blame] | 548 | depends on I2C && OF_GPIO |
Thierry Reding | 5e969a4 | 2012-09-18 10:57:10 +0200 | [diff] [blame] | 549 | help |
| 550 | This option enables support for N GPIOs found on Avionic Design |
| 551 | I2C GPIO expanders. The register space will be extended by powers |
Masanari Iida | e41e85c | 2012-11-30 16:44:39 +0900 | [diff] [blame] | 552 | of two, so the controller will need to accommodate for that. For |
Thierry Reding | 5e969a4 | 2012-09-18 10:57:10 +0200 | [diff] [blame] | 553 | example: if a controller provides 48 pins, 6 registers will be |
| 554 | enough to represent all pins, but the driver will assume a |
| 555 | register layout for 64 pins (8 registers). |
| 556 | |
Michael Buesch | ff1d5c2 | 2008-07-25 01:46:10 -0700 | [diff] [blame] | 557 | comment "PCI GPIO expanders:" |
| 558 | |
Andres Salomon | 5f0a96b | 2009-12-14 18:00:32 -0800 | [diff] [blame] | 559 | config GPIO_CS5535 |
| 560 | tristate "AMD CS5535/CS5536 GPIO support" |
Paul Bolle | babf000 | 2011-11-23 11:44:24 +0100 | [diff] [blame] | 561 | depends on PCI && X86 && MFD_CS5535 |
Andres Salomon | 5f0a96b | 2009-12-14 18:00:32 -0800 | [diff] [blame] | 562 | help |
| 563 | The AMD CS5535 and CS5536 southbridges support 28 GPIO pins that |
| 564 | can be used for quite a number of things. The CS5535/6 is found on |
| 565 | AMD Geode and Lemote Yeeloong devices. |
| 566 | |
| 567 | If unsure, say N. |
| 568 | |
Michael Buesch | ff1d5c2 | 2008-07-25 01:46:10 -0700 | [diff] [blame] | 569 | config GPIO_BT8XX |
| 570 | tristate "BT8XX GPIO abuser" |
| 571 | depends on PCI && VIDEO_BT848=n |
| 572 | help |
| 573 | The BT8xx frame grabber chip has 24 GPIO pins than can be abused |
| 574 | as a cheap PCI GPIO card. |
| 575 | |
| 576 | This chip can be found on Miro, Hauppauge and STB TV-cards. |
| 577 | |
| 578 | The card needs to be physically altered for using it as a |
| 579 | GPIO card. For more information on how to build a GPIO card |
| 580 | from a BT8xx TV card, see the documentation file at |
| 581 | Documentation/bt8xxgpio.txt |
| 582 | |
| 583 | If unsure, say N. |
| 584 | |
Dmitry Eremin-Solenikov | f942a7d | 2012-06-01 17:36:31 +0400 | [diff] [blame] | 585 | config GPIO_AMD8111 |
| 586 | tristate "AMD 8111 GPIO driver" |
| 587 | depends on PCI |
| 588 | help |
| 589 | The AMD 8111 south bridge contains 32 GPIO pins which can be used. |
| 590 | |
| 591 | Note, that usually system firmware/ACPI handles GPIO pins on their |
| 592 | own and users might easily break their systems with uncarefull usage |
| 593 | of this driver! |
| 594 | |
| 595 | If unsure, say N |
| 596 | |
Alek Du | 8bf0261 | 2009-09-22 16:46:36 -0700 | [diff] [blame] | 597 | config GPIO_LANGWELL |
Alek Du | 8081c84 | 2010-05-26 14:42:25 -0700 | [diff] [blame] | 598 | bool "Intel Langwell/Penwell GPIO support" |
Thomas Gleixner | 61ab3fe | 2011-03-17 19:32:46 +0000 | [diff] [blame] | 599 | depends on PCI && X86 |
Mika Westerberg | 465f2bd | 2012-05-02 11:15:50 +0300 | [diff] [blame] | 600 | select IRQ_DOMAIN |
Alek Du | 8bf0261 | 2009-09-22 16:46:36 -0700 | [diff] [blame] | 601 | help |
Alek Du | 8081c84 | 2010-05-26 14:42:25 -0700 | [diff] [blame] | 602 | Say Y here to support Intel Langwell/Penwell GPIO. |
Alek Du | 8bf0261 | 2009-09-22 16:46:36 -0700 | [diff] [blame] | 603 | |
Tomoya MORINAGA | 04c17aa8 | 2010-10-27 15:33:21 -0700 | [diff] [blame] | 604 | config GPIO_PCH |
Tomoya MORINAGA | 868fea0 | 2011-10-28 09:23:32 +0900 | [diff] [blame] | 605 | tristate "Intel EG20T PCH/LAPIS Semiconductor IOH(ML7223/ML7831) GPIO" |
Thomas Gleixner | 61ab3fe | 2011-03-17 19:32:46 +0000 | [diff] [blame] | 606 | depends on PCI && X86 |
Tomoya MORINAGA | 38eb18a | 2011-07-21 09:19:59 +0900 | [diff] [blame] | 607 | select GENERIC_IRQ_CHIP |
Tomoya MORINAGA | 04c17aa8 | 2010-10-27 15:33:21 -0700 | [diff] [blame] | 608 | help |
| 609 | This driver is for PCH(Platform controller Hub) GPIO of Intel Topcliff |
| 610 | which is an IOH(Input/Output Hub) for x86 embedded processor. |
| 611 | This driver can access PCH GPIO device. |
| 612 | |
Tomoya MORINAGA | 868fea0 | 2011-10-28 09:23:32 +0900 | [diff] [blame] | 613 | This driver also can be used for LAPIS Semiconductor IOH(Input/ |
| 614 | Output Hub), ML7223 and ML7831. |
Tomoya MORINAGA | bc786cc | 2011-05-09 19:58:49 +0900 | [diff] [blame] | 615 | ML7223 IOH is for MP(Media Phone) use. |
Tomoya MORINAGA | 868fea0 | 2011-10-28 09:23:32 +0900 | [diff] [blame] | 616 | ML7831 IOH is for general purpose use. |
| 617 | ML7223/ML7831 is companion chip for Intel Atom E6xx series. |
| 618 | ML7223/ML7831 is completely compatible for Intel EG20T PCH. |
Tomoya MORINAGA | bc786cc | 2011-05-09 19:58:49 +0900 | [diff] [blame] | 619 | |
Tomoya MORINAGA | 49a3679 | 2011-01-12 17:00:22 -0800 | [diff] [blame] | 620 | config GPIO_ML_IOH |
| 621 | tristate "OKI SEMICONDUCTOR ML7213 IOH GPIO support" |
| 622 | depends on PCI |
Tomoya MORINAGA | 54be566 | 2011-08-05 13:04:21 +0900 | [diff] [blame] | 623 | select GENERIC_IRQ_CHIP |
Tomoya MORINAGA | 49a3679 | 2011-01-12 17:00:22 -0800 | [diff] [blame] | 624 | help |
| 625 | ML7213 is companion chip for Intel Atom E6xx series. |
| 626 | This driver can be used for OKI SEMICONDUCTOR ML7213 IOH(Input/Output |
| 627 | Hub) which is for IVI(In-Vehicle Infotainment) use. |
| 628 | This driver can access the IOH's GPIO device. |
| 629 | |
Sebastian Andrzej Siewior | b43ab90 | 2011-06-27 09:26:23 +0200 | [diff] [blame] | 630 | config GPIO_SODAVILLE |
| 631 | bool "Intel Sodaville GPIO support" |
Grant Likely | 3ffc9ce | 2012-03-28 14:55:04 -0600 | [diff] [blame] | 632 | depends on X86 && PCI && OF |
Sebastian Andrzej Siewior | b43ab90 | 2011-06-27 09:26:23 +0200 | [diff] [blame] | 633 | select GPIO_GENERIC |
| 634 | select GENERIC_IRQ_CHIP |
| 635 | help |
| 636 | Say Y here to support Intel Sodaville GPIO. |
| 637 | |
Richard Röjfors | 35570ac | 2009-12-15 16:46:18 -0800 | [diff] [blame] | 638 | config GPIO_TIMBERDALE |
| 639 | bool "Support for timberdale GPIO IP" |
H Hartley Sweeten | 6cff9e2 | 2011-05-20 00:40:17 -0600 | [diff] [blame] | 640 | depends on MFD_TIMBERDALE && HAS_IOMEM |
Richard Röjfors | 35570ac | 2009-12-15 16:46:18 -0800 | [diff] [blame] | 641 | ---help--- |
| 642 | Add support for the GPIO IP in the timberdale FPGA. |
| 643 | |
Florian Fainelli | 9956d02 | 2010-03-21 01:06:09 +0100 | [diff] [blame] | 644 | config GPIO_RDC321X |
| 645 | tristate "RDC R-321x GPIO support" |
Heiko Carstens | 29bde2d | 2013-02-05 12:48:29 +0100 | [diff] [blame] | 646 | depends on PCI && GENERIC_HARDIRQS |
Randy Dunlap | e4be3cb | 2010-05-11 13:24:20 -0700 | [diff] [blame] | 647 | select MFD_CORE |
Florian Fainelli | 9956d02 | 2010-03-21 01:06:09 +0100 | [diff] [blame] | 648 | select MFD_RDC321X |
| 649 | help |
| 650 | Support for the RDC R321x SoC GPIOs over southbridge |
| 651 | PCI configuration space. |
| 652 | |
David Brownell | a9c5fff | 2008-02-04 22:28:17 -0800 | [diff] [blame] | 653 | comment "SPI GPIO expanders:" |
| 654 | |
Juergen Beisert | 0c36ec3 | 2008-07-21 14:21:34 -0700 | [diff] [blame] | 655 | config GPIO_MAX7301 |
| 656 | tristate "Maxim MAX7301 GPIO expander" |
| 657 | depends on SPI_MASTER |
Wolfram Sang | e952805 | 2010-03-05 13:44:33 -0800 | [diff] [blame] | 658 | select GPIO_MAX730X |
Juergen Beisert | 0c36ec3 | 2008-07-21 14:21:34 -0700 | [diff] [blame] | 659 | help |
Wolfram Sang | e952805 | 2010-03-05 13:44:33 -0800 | [diff] [blame] | 660 | GPIO driver for Maxim MAX7301 SPI-based GPIO expander. |
Juergen Beisert | 0c36ec3 | 2008-07-21 14:21:34 -0700 | [diff] [blame] | 661 | |
David Brownell | e58b9e2 | 2008-02-04 22:28:25 -0800 | [diff] [blame] | 662 | config GPIO_MCP23S08 |
Peter Korsgaard | 752ad5e | 2011-07-15 10:25:32 +0200 | [diff] [blame] | 663 | tristate "Microchip MCP23xxx I/O expander" |
Axel Lin | 0f119a8 | 2013-05-19 19:11:54 +0800 | [diff] [blame] | 664 | depends on (SPI_MASTER && !I2C) || I2C |
David Brownell | e58b9e2 | 2008-02-04 22:28:25 -0800 | [diff] [blame] | 665 | help |
Peter Korsgaard | 752ad5e | 2011-07-15 10:25:32 +0200 | [diff] [blame] | 666 | SPI/I2C driver for Microchip MCP23S08/MCP23S17/MCP23008/MCP23017 |
| 667 | I/O expanders. |
Peter Korsgaard | 0b7bb77 | 2011-03-09 17:56:30 +0100 | [diff] [blame] | 668 | This provides a GPIO interface supporting inputs and outputs. |
David Brownell | e58b9e2 | 2008-02-04 22:28:25 -0800 | [diff] [blame] | 669 | |
Richard Röjfors | 1e5db00 | 2009-09-22 16:46:34 -0700 | [diff] [blame] | 670 | config GPIO_MC33880 |
| 671 | tristate "Freescale MC33880 high-side/low-side switch" |
| 672 | depends on SPI_MASTER |
| 673 | help |
| 674 | SPI driver for Freescale MC33880 high-side/low-side switch. |
| 675 | This provides GPIO interface supporting inputs and outputs. |
| 676 | |
Miguel Gaio | ead6db08 | 2010-10-27 15:33:18 -0700 | [diff] [blame] | 677 | config GPIO_74X164 |
| 678 | tristate "74x164 serial-in/parallel-out 8-bits shift register" |
| 679 | depends on SPI_MASTER |
| 680 | help |
| 681 | Platform driver for 74x164 compatible serial-in/parallel-out |
| 682 | 8-outputs shift registers. This driver can be used to provide access |
| 683 | to more gpio outputs. |
| 684 | |
Marek Vasut | 4cf8e53 | 2009-09-22 16:46:35 -0700 | [diff] [blame] | 685 | comment "AC97 GPIO expanders:" |
| 686 | |
| 687 | config GPIO_UCB1400 |
| 688 | bool "Philips UCB1400 GPIO" |
| 689 | depends on UCB1400_CORE |
| 690 | help |
| 691 | This enables support for the Philips UCB1400 GPIO pins. |
| 692 | The UCB1400 is an AC97 audio codec. |
| 693 | |
Guenter Roeck | d22fcde | 2013-06-23 21:00:05 -0700 | [diff] [blame] | 694 | comment "LPC GPIO expanders:" |
| 695 | |
| 696 | config GPIO_KEMPLD |
| 697 | tristate "Kontron ETX / COMexpress GPIO" |
| 698 | depends on MFD_KEMPLD |
| 699 | help |
| 700 | This enables support for the PLD GPIO interface on some Kontron ETX |
| 701 | and COMexpress (ETXexpress) modules. |
| 702 | |
| 703 | This driver can also be built as a module. If so, the module will be |
| 704 | called gpio-kempld. |
| 705 | |
Ira W. Snyder | 800e69f | 2010-04-07 10:08:01 +0200 | [diff] [blame] | 706 | comment "MODULbus GPIO expanders:" |
| 707 | |
| 708 | config GPIO_JANZ_TTL |
| 709 | tristate "Janz VMOD-TTL Digital IO Module" |
| 710 | depends on MFD_JANZ_CMODIO |
| 711 | help |
| 712 | This enables support for the Janz VMOD-TTL Digital IO module. |
| 713 | This driver provides support for driving the pins in output |
| 714 | mode only. Input mode is not supported. |
| 715 | |
Laxman Dewangan | 3d50a27 | 2013-01-03 16:16:59 +0530 | [diff] [blame] | 716 | config GPIO_PALMAS |
| 717 | bool "TI PALMAS series PMICs GPIO" |
| 718 | depends on MFD_PALMAS |
| 719 | help |
| 720 | Select this option to enable GPIO driver for the TI PALMAS |
| 721 | series chip family. |
| 722 | |
Laxman Dewangan | 72bd986 | 2012-07-18 11:50:48 +0530 | [diff] [blame] | 723 | config GPIO_TPS6586X |
| 724 | bool "TPS6586X GPIO" |
| 725 | depends on MFD_TPS6586X |
| 726 | help |
| 727 | Select this option to enable GPIO driver for the TPS6586X |
| 728 | chip family. |
| 729 | |
Jorge Eduardo Candelaria | 83545d8 | 2011-05-16 18:35:37 -0500 | [diff] [blame] | 730 | config GPIO_TPS65910 |
| 731 | bool "TPS65910 GPIO" |
| 732 | depends on MFD_TPS65910 |
| 733 | help |
| 734 | Select this option to enable GPIO driver for the TPS65910 |
| 735 | chip family. |
Mathias Nyman | 25cf250 | 2012-04-24 11:02:49 +0100 | [diff] [blame] | 736 | |
| 737 | config GPIO_MSIC |
| 738 | bool "Intel MSIC mixed signal gpio support" |
| 739 | depends on MFD_INTEL_MSIC |
| 740 | help |
| 741 | Enable support for GPIO on intel MSIC controllers found in |
| 742 | intel MID devices |
| 743 | |
Lars Poeschel | 9d5b72d | 2012-11-05 15:48:24 +0100 | [diff] [blame] | 744 | comment "USB GPIO expanders:" |
| 745 | |
| 746 | config GPIO_VIPERBOARD |
| 747 | tristate "Viperboard GPIO a & b support" |
| 748 | depends on MFD_VIPERBOARD && USB |
| 749 | help |
| 750 | Say yes here to access the GPIO signals of Nano River |
| 751 | Technologies Viperboard. There are two GPIO chips on the |
| 752 | board: gpioa and gpiob. |
| 753 | See viperboard API specification and Nano |
| 754 | River Tech's viperboard.h for detailed meaning |
| 755 | of the module parameters. |
| 756 | |
Michael Buesch | 7444a72 | 2008-07-25 01:46:11 -0700 | [diff] [blame] | 757 | endif |