blob: 8c26bef6cf49cc23d0eecafe635e20f93b89f052 [file] [log] [blame]
Ivo van Doorn95ea3622007-09-25 17:57:13 -07001/*
Ivo van Doorn811aa9c2008-02-03 15:42:53 +01002 Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
Ivo van Doorn95ea3622007-09-25 17:57:13 -07003 <http://rt2x00.serialmonkey.com>
4
5 This program is free software; you can redistribute it and/or modify
6 it under the terms of the GNU General Public License as published by
7 the Free Software Foundation; either version 2 of the License, or
8 (at your option) any later version.
9
10 This program is distributed in the hope that it will be useful,
11 but WITHOUT ANY WARRANTY; without even the implied warranty of
12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 GNU General Public License for more details.
14
15 You should have received a copy of the GNU General Public License
16 along with this program; if not, write to the
17 Free Software Foundation, Inc.,
18 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
19 */
20
21/*
22 Module: rt2500pci
23 Abstract: Data structures and registers for the rt2500pci module.
24 Supported chipsets: RT2560.
25 */
26
27#ifndef RT2500PCI_H
28#define RT2500PCI_H
29
30/*
31 * RF chip defines.
32 */
33#define RF2522 0x0000
34#define RF2523 0x0001
35#define RF2524 0x0002
36#define RF2525 0x0003
37#define RF2525E 0x0004
38#define RF5222 0x0010
39
40/*
41 * RT2560 version
42 */
43#define RT2560_VERSION_B 2
44#define RT2560_VERSION_C 3
45#define RT2560_VERSION_D 4
46
47/*
48 * Signal information.
49 * Defaul offset is required for RSSI <-> dBm conversion.
50 */
Ivo van Doorn95ea3622007-09-25 17:57:13 -070051#define DEFAULT_RSSI_OFFSET 121
52
53/*
54 * Register layout information.
55 */
56#define CSR_REG_BASE 0x0000
57#define CSR_REG_SIZE 0x0174
58#define EEPROM_BASE 0x0000
59#define EEPROM_SIZE 0x0200
60#define BBP_SIZE 0x0040
61#define RF_SIZE 0x0014
62
63/*
Gertjan van Wingerde61448f82008-05-10 13:43:33 +020064 * Number of TX queues.
65 */
66#define NUM_TX_QUEUES 2
67
68/*
Ivo van Doorn95ea3622007-09-25 17:57:13 -070069 * Control/Status Registers(CSR).
70 * Some values are set in TU, whereas 1 TU == 1024 us.
71 */
72
73/*
74 * CSR0: ASIC revision number.
75 */
76#define CSR0 0x0000
77
78/*
79 * CSR1: System control register.
80 * SOFT_RESET: Software reset, 1: reset, 0: normal.
81 * BBP_RESET: Hardware reset, 1: reset, 0, release.
82 * HOST_READY: Host ready after initialization.
83 */
84#define CSR1 0x0004
85#define CSR1_SOFT_RESET FIELD32(0x00000001)
86#define CSR1_BBP_RESET FIELD32(0x00000002)
87#define CSR1_HOST_READY FIELD32(0x00000004)
88
89/*
90 * CSR2: System admin status register (invalid).
91 */
92#define CSR2 0x0008
93
94/*
95 * CSR3: STA MAC address register 0.
96 */
97#define CSR3 0x000c
98#define CSR3_BYTE0 FIELD32(0x000000ff)
99#define CSR3_BYTE1 FIELD32(0x0000ff00)
100#define CSR3_BYTE2 FIELD32(0x00ff0000)
101#define CSR3_BYTE3 FIELD32(0xff000000)
102
103/*
104 * CSR4: STA MAC address register 1.
105 */
106#define CSR4 0x0010
107#define CSR4_BYTE4 FIELD32(0x000000ff)
108#define CSR4_BYTE5 FIELD32(0x0000ff00)
109
110/*
111 * CSR5: BSSID register 0.
112 */
113#define CSR5 0x0014
114#define CSR5_BYTE0 FIELD32(0x000000ff)
115#define CSR5_BYTE1 FIELD32(0x0000ff00)
116#define CSR5_BYTE2 FIELD32(0x00ff0000)
117#define CSR5_BYTE3 FIELD32(0xff000000)
118
119/*
120 * CSR6: BSSID register 1.
121 */
122#define CSR6 0x0018
123#define CSR6_BYTE4 FIELD32(0x000000ff)
124#define CSR6_BYTE5 FIELD32(0x0000ff00)
125
126/*
127 * CSR7: Interrupt source register.
128 * Write 1 to clear.
129 * TBCN_EXPIRE: Beacon timer expired interrupt.
130 * TWAKE_EXPIRE: Wakeup timer expired interrupt.
131 * TATIMW_EXPIRE: Timer of atim window expired interrupt.
132 * TXDONE_TXRING: Tx ring transmit done interrupt.
133 * TXDONE_ATIMRING: Atim ring transmit done interrupt.
134 * TXDONE_PRIORING: Priority ring transmit done interrupt.
135 * RXDONE: Receive done interrupt.
136 * DECRYPTION_DONE: Decryption done interrupt.
137 * ENCRYPTION_DONE: Encryption done interrupt.
138 * UART1_TX_TRESHOLD: UART1 TX reaches threshold.
139 * UART1_RX_TRESHOLD: UART1 RX reaches threshold.
140 * UART1_IDLE_TRESHOLD: UART1 IDLE over threshold.
141 * UART1_TX_BUFF_ERROR: UART1 TX buffer error.
142 * UART1_RX_BUFF_ERROR: UART1 RX buffer error.
143 * UART2_TX_TRESHOLD: UART2 TX reaches threshold.
144 * UART2_RX_TRESHOLD: UART2 RX reaches threshold.
145 * UART2_IDLE_TRESHOLD: UART2 IDLE over threshold.
146 * UART2_TX_BUFF_ERROR: UART2 TX buffer error.
147 * UART2_RX_BUFF_ERROR: UART2 RX buffer error.
148 * TIMER_CSR3_EXPIRE: TIMECSR3 timer expired (802.1H quiet period).
149
150 */
151#define CSR7 0x001c
152#define CSR7_TBCN_EXPIRE FIELD32(0x00000001)
153#define CSR7_TWAKE_EXPIRE FIELD32(0x00000002)
154#define CSR7_TATIMW_EXPIRE FIELD32(0x00000004)
155#define CSR7_TXDONE_TXRING FIELD32(0x00000008)
156#define CSR7_TXDONE_ATIMRING FIELD32(0x00000010)
157#define CSR7_TXDONE_PRIORING FIELD32(0x00000020)
158#define CSR7_RXDONE FIELD32(0x00000040)
159#define CSR7_DECRYPTION_DONE FIELD32(0x00000080)
160#define CSR7_ENCRYPTION_DONE FIELD32(0x00000100)
161#define CSR7_UART1_TX_TRESHOLD FIELD32(0x00000200)
162#define CSR7_UART1_RX_TRESHOLD FIELD32(0x00000400)
163#define CSR7_UART1_IDLE_TRESHOLD FIELD32(0x00000800)
164#define CSR7_UART1_TX_BUFF_ERROR FIELD32(0x00001000)
165#define CSR7_UART1_RX_BUFF_ERROR FIELD32(0x00002000)
166#define CSR7_UART2_TX_TRESHOLD FIELD32(0x00004000)
167#define CSR7_UART2_RX_TRESHOLD FIELD32(0x00008000)
168#define CSR7_UART2_IDLE_TRESHOLD FIELD32(0x00010000)
169#define CSR7_UART2_TX_BUFF_ERROR FIELD32(0x00020000)
170#define CSR7_UART2_RX_BUFF_ERROR FIELD32(0x00040000)
171#define CSR7_TIMER_CSR3_EXPIRE FIELD32(0x00080000)
172
173/*
174 * CSR8: Interrupt mask register.
175 * Write 1 to mask interrupt.
176 * TBCN_EXPIRE: Beacon timer expired interrupt.
177 * TWAKE_EXPIRE: Wakeup timer expired interrupt.
178 * TATIMW_EXPIRE: Timer of atim window expired interrupt.
179 * TXDONE_TXRING: Tx ring transmit done interrupt.
180 * TXDONE_ATIMRING: Atim ring transmit done interrupt.
181 * TXDONE_PRIORING: Priority ring transmit done interrupt.
182 * RXDONE: Receive done interrupt.
183 * DECRYPTION_DONE: Decryption done interrupt.
184 * ENCRYPTION_DONE: Encryption done interrupt.
185 * UART1_TX_TRESHOLD: UART1 TX reaches threshold.
186 * UART1_RX_TRESHOLD: UART1 RX reaches threshold.
187 * UART1_IDLE_TRESHOLD: UART1 IDLE over threshold.
188 * UART1_TX_BUFF_ERROR: UART1 TX buffer error.
189 * UART1_RX_BUFF_ERROR: UART1 RX buffer error.
190 * UART2_TX_TRESHOLD: UART2 TX reaches threshold.
191 * UART2_RX_TRESHOLD: UART2 RX reaches threshold.
192 * UART2_IDLE_TRESHOLD: UART2 IDLE over threshold.
193 * UART2_TX_BUFF_ERROR: UART2 TX buffer error.
194 * UART2_RX_BUFF_ERROR: UART2 RX buffer error.
195 * TIMER_CSR3_EXPIRE: TIMECSR3 timer expired (802.1H quiet period).
196 */
197#define CSR8 0x0020
198#define CSR8_TBCN_EXPIRE FIELD32(0x00000001)
199#define CSR8_TWAKE_EXPIRE FIELD32(0x00000002)
200#define CSR8_TATIMW_EXPIRE FIELD32(0x00000004)
201#define CSR8_TXDONE_TXRING FIELD32(0x00000008)
202#define CSR8_TXDONE_ATIMRING FIELD32(0x00000010)
203#define CSR8_TXDONE_PRIORING FIELD32(0x00000020)
204#define CSR8_RXDONE FIELD32(0x00000040)
205#define CSR8_DECRYPTION_DONE FIELD32(0x00000080)
206#define CSR8_ENCRYPTION_DONE FIELD32(0x00000100)
207#define CSR8_UART1_TX_TRESHOLD FIELD32(0x00000200)
208#define CSR8_UART1_RX_TRESHOLD FIELD32(0x00000400)
209#define CSR8_UART1_IDLE_TRESHOLD FIELD32(0x00000800)
210#define CSR8_UART1_TX_BUFF_ERROR FIELD32(0x00001000)
211#define CSR8_UART1_RX_BUFF_ERROR FIELD32(0x00002000)
212#define CSR8_UART2_TX_TRESHOLD FIELD32(0x00004000)
213#define CSR8_UART2_RX_TRESHOLD FIELD32(0x00008000)
214#define CSR8_UART2_IDLE_TRESHOLD FIELD32(0x00010000)
215#define CSR8_UART2_TX_BUFF_ERROR FIELD32(0x00020000)
216#define CSR8_UART2_RX_BUFF_ERROR FIELD32(0x00040000)
217#define CSR8_TIMER_CSR3_EXPIRE FIELD32(0x00080000)
218
219/*
220 * CSR9: Maximum frame length register.
221 * MAX_FRAME_UNIT: Maximum frame length in 128b unit, default: 12.
222 */
223#define CSR9 0x0024
224#define CSR9_MAX_FRAME_UNIT FIELD32(0x00000f80)
225
226/*
227 * SECCSR0: WEP control register.
228 * KICK_DECRYPT: Kick decryption engine, self-clear.
229 * ONE_SHOT: 0: ring mode, 1: One shot only mode.
230 * DESC_ADDRESS: Descriptor physical address of frame.
231 */
232#define SECCSR0 0x0028
233#define SECCSR0_KICK_DECRYPT FIELD32(0x00000001)
234#define SECCSR0_ONE_SHOT FIELD32(0x00000002)
235#define SECCSR0_DESC_ADDRESS FIELD32(0xfffffffc)
236
237/*
238 * CSR11: Back-off control register.
239 * CWMIN: CWmin. Default cwmin is 31 (2^5 - 1).
240 * CWMAX: CWmax. Default cwmax is 1023 (2^10 - 1).
241 * SLOT_TIME: Slot time, default is 20us for 802.11b
242 * CW_SELECT: CWmin/CWmax selection, 1: Register, 0: TXD.
243 * LONG_RETRY: Long retry count.
244 * SHORT_RETRY: Short retry count.
245 */
246#define CSR11 0x002c
247#define CSR11_CWMIN FIELD32(0x0000000f)
248#define CSR11_CWMAX FIELD32(0x000000f0)
249#define CSR11_SLOT_TIME FIELD32(0x00001f00)
250#define CSR11_CW_SELECT FIELD32(0x00002000)
251#define CSR11_LONG_RETRY FIELD32(0x00ff0000)
252#define CSR11_SHORT_RETRY FIELD32(0xff000000)
253
254/*
255 * CSR12: Synchronization configuration register 0.
256 * All units in 1/16 TU.
257 * BEACON_INTERVAL: Beacon interval, default is 100 TU.
258 * CFP_MAX_DURATION: Cfp maximum duration, default is 100 TU.
259 */
260#define CSR12 0x0030
261#define CSR12_BEACON_INTERVAL FIELD32(0x0000ffff)
262#define CSR12_CFP_MAX_DURATION FIELD32(0xffff0000)
263
264/*
265 * CSR13: Synchronization configuration register 1.
266 * All units in 1/16 TU.
267 * ATIMW_DURATION: Atim window duration.
268 * CFP_PERIOD: Cfp period, default is 0 TU.
269 */
270#define CSR13 0x0034
271#define CSR13_ATIMW_DURATION FIELD32(0x0000ffff)
272#define CSR13_CFP_PERIOD FIELD32(0x00ff0000)
273
274/*
275 * CSR14: Synchronization control register.
276 * TSF_COUNT: Enable tsf auto counting.
277 * TSF_SYNC: Tsf sync, 0: disable, 1: infra, 2: ad-hoc/master mode.
278 * TBCN: Enable tbcn with reload value.
279 * TCFP: Enable tcfp & cfp / cp switching.
280 * TATIMW: Enable tatimw & atim window switching.
281 * BEACON_GEN: Enable beacon generator.
282 * CFP_COUNT_PRELOAD: Cfp count preload value.
283 * TBCM_PRELOAD: Tbcn preload value in units of 64us.
284 */
285#define CSR14 0x0038
286#define CSR14_TSF_COUNT FIELD32(0x00000001)
287#define CSR14_TSF_SYNC FIELD32(0x00000006)
288#define CSR14_TBCN FIELD32(0x00000008)
289#define CSR14_TCFP FIELD32(0x00000010)
290#define CSR14_TATIMW FIELD32(0x00000020)
291#define CSR14_BEACON_GEN FIELD32(0x00000040)
292#define CSR14_CFP_COUNT_PRELOAD FIELD32(0x0000ff00)
293#define CSR14_TBCM_PRELOAD FIELD32(0xffff0000)
294
295/*
296 * CSR15: Synchronization status register.
297 * CFP: ASIC is in contention-free period.
298 * ATIMW: ASIC is in ATIM window.
299 * BEACON_SENT: Beacon is send.
300 */
301#define CSR15 0x003c
302#define CSR15_CFP FIELD32(0x00000001)
303#define CSR15_ATIMW FIELD32(0x00000002)
304#define CSR15_BEACON_SENT FIELD32(0x00000004)
305
306/*
307 * CSR16: TSF timer register 0.
308 */
309#define CSR16 0x0040
310#define CSR16_LOW_TSFTIMER FIELD32(0xffffffff)
311
312/*
313 * CSR17: TSF timer register 1.
314 */
315#define CSR17 0x0044
316#define CSR17_HIGH_TSFTIMER FIELD32(0xffffffff)
317
318/*
319 * CSR18: IFS timer register 0.
320 * SIFS: Sifs, default is 10 us.
321 * PIFS: Pifs, default is 30 us.
322 */
323#define CSR18 0x0048
324#define CSR18_SIFS FIELD32(0x000001ff)
325#define CSR18_PIFS FIELD32(0x001f0000)
326
327/*
328 * CSR19: IFS timer register 1.
329 * DIFS: Difs, default is 50 us.
330 * EIFS: Eifs, default is 364 us.
331 */
332#define CSR19 0x004c
333#define CSR19_DIFS FIELD32(0x0000ffff)
334#define CSR19_EIFS FIELD32(0xffff0000)
335
336/*
337 * CSR20: Wakeup timer register.
338 * DELAY_AFTER_TBCN: Delay after tbcn expired in units of 1/16 TU.
339 * TBCN_BEFORE_WAKEUP: Number of beacon before wakeup.
340 * AUTOWAKE: Enable auto wakeup / sleep mechanism.
341 */
342#define CSR20 0x0050
343#define CSR20_DELAY_AFTER_TBCN FIELD32(0x0000ffff)
344#define CSR20_TBCN_BEFORE_WAKEUP FIELD32(0x00ff0000)
345#define CSR20_AUTOWAKE FIELD32(0x01000000)
346
347/*
348 * CSR21: EEPROM control register.
349 * RELOAD: Write 1 to reload eeprom content.
350 * TYPE_93C46: 1: 93c46, 0:93c66.
351 */
352#define CSR21 0x0054
353#define CSR21_RELOAD FIELD32(0x00000001)
354#define CSR21_EEPROM_DATA_CLOCK FIELD32(0x00000002)
355#define CSR21_EEPROM_CHIP_SELECT FIELD32(0x00000004)
356#define CSR21_EEPROM_DATA_IN FIELD32(0x00000008)
357#define CSR21_EEPROM_DATA_OUT FIELD32(0x00000010)
358#define CSR21_TYPE_93C46 FIELD32(0x00000020)
359
360/*
361 * CSR22: CFP control register.
362 * CFP_DURATION_REMAIN: Cfp duration remain, in units of TU.
363 * RELOAD_CFP_DURATION: Write 1 to reload cfp duration remain.
364 */
365#define CSR22 0x0058
366#define CSR22_CFP_DURATION_REMAIN FIELD32(0x0000ffff)
367#define CSR22_RELOAD_CFP_DURATION FIELD32(0x00010000)
368
369/*
370 * Transmit related CSRs.
371 * Some values are set in TU, whereas 1 TU == 1024 us.
372 */
373
374/*
375 * TXCSR0: TX Control Register.
376 * KICK_TX: Kick tx ring.
377 * KICK_ATIM: Kick atim ring.
378 * KICK_PRIO: Kick priority ring.
379 * ABORT: Abort all transmit related ring operation.
380 */
381#define TXCSR0 0x0060
382#define TXCSR0_KICK_TX FIELD32(0x00000001)
383#define TXCSR0_KICK_ATIM FIELD32(0x00000002)
384#define TXCSR0_KICK_PRIO FIELD32(0x00000004)
385#define TXCSR0_ABORT FIELD32(0x00000008)
386
387/*
388 * TXCSR1: TX Configuration Register.
389 * ACK_TIMEOUT: Ack timeout, default = sifs + 2*slottime + acktime @ 1mbps.
390 * ACK_CONSUME_TIME: Ack consume time, default = sifs + acktime @ 1mbps.
391 * TSF_OFFSET: Insert tsf offset.
392 * AUTORESPONDER: Enable auto responder which include ack & cts.
393 */
394#define TXCSR1 0x0064
395#define TXCSR1_ACK_TIMEOUT FIELD32(0x000001ff)
396#define TXCSR1_ACK_CONSUME_TIME FIELD32(0x0003fe00)
397#define TXCSR1_TSF_OFFSET FIELD32(0x00fc0000)
398#define TXCSR1_AUTORESPONDER FIELD32(0x01000000)
399
400/*
401 * TXCSR2: Tx descriptor configuration register.
402 * TXD_SIZE: Tx descriptor size, default is 48.
403 * NUM_TXD: Number of tx entries in ring.
404 * NUM_ATIM: Number of atim entries in ring.
405 * NUM_PRIO: Number of priority entries in ring.
406 */
407#define TXCSR2 0x0068
408#define TXCSR2_TXD_SIZE FIELD32(0x000000ff)
409#define TXCSR2_NUM_TXD FIELD32(0x0000ff00)
410#define TXCSR2_NUM_ATIM FIELD32(0x00ff0000)
411#define TXCSR2_NUM_PRIO FIELD32(0xff000000)
412
413/*
414 * TXCSR3: TX Ring Base address register.
415 */
416#define TXCSR3 0x006c
417#define TXCSR3_TX_RING_REGISTER FIELD32(0xffffffff)
418
419/*
420 * TXCSR4: TX Atim Ring Base address register.
421 */
422#define TXCSR4 0x0070
423#define TXCSR4_ATIM_RING_REGISTER FIELD32(0xffffffff)
424
425/*
426 * TXCSR5: TX Prio Ring Base address register.
427 */
428#define TXCSR5 0x0074
429#define TXCSR5_PRIO_RING_REGISTER FIELD32(0xffffffff)
430
431/*
432 * TXCSR6: Beacon Base address register.
433 */
434#define TXCSR6 0x0078
435#define TXCSR6_BEACON_RING_REGISTER FIELD32(0xffffffff)
436
437/*
438 * TXCSR7: Auto responder control register.
439 * AR_POWERMANAGEMENT: Auto responder power management bit.
440 */
441#define TXCSR7 0x007c
442#define TXCSR7_AR_POWERMANAGEMENT FIELD32(0x00000001)
443
444/*
445 * TXCSR8: CCK Tx BBP register.
446 */
447#define TXCSR8 0x0098
448#define TXCSR8_BBP_ID0 FIELD32(0x0000007f)
449#define TXCSR8_BBP_ID0_VALID FIELD32(0x00000080)
450#define TXCSR8_BBP_ID1 FIELD32(0x00007f00)
451#define TXCSR8_BBP_ID1_VALID FIELD32(0x00008000)
452#define TXCSR8_BBP_ID2 FIELD32(0x007f0000)
453#define TXCSR8_BBP_ID2_VALID FIELD32(0x00800000)
454#define TXCSR8_BBP_ID3 FIELD32(0x7f000000)
455#define TXCSR8_BBP_ID3_VALID FIELD32(0x80000000)
456
457/*
458 * TXCSR9: OFDM TX BBP registers
459 * OFDM_SIGNAL: BBP rate field address for OFDM.
460 * OFDM_SERVICE: BBP service field address for OFDM.
461 * OFDM_LENGTH_LOW: BBP length low byte address for OFDM.
462 * OFDM_LENGTH_HIGH: BBP length high byte address for OFDM.
463 */
464#define TXCSR9 0x0094
465#define TXCSR9_OFDM_RATE FIELD32(0x000000ff)
466#define TXCSR9_OFDM_SERVICE FIELD32(0x0000ff00)
467#define TXCSR9_OFDM_LENGTH_LOW FIELD32(0x00ff0000)
468#define TXCSR9_OFDM_LENGTH_HIGH FIELD32(0xff000000)
469
470/*
471 * Receive related CSRs.
472 * Some values are set in TU, whereas 1 TU == 1024 us.
473 */
474
475/*
476 * RXCSR0: RX Control Register.
477 * DISABLE_RX: Disable rx engine.
478 * DROP_CRC: Drop crc error.
479 * DROP_PHYSICAL: Drop physical error.
480 * DROP_CONTROL: Drop control frame.
481 * DROP_NOT_TO_ME: Drop not to me unicast frame.
482 * DROP_TODS: Drop frame tods bit is true.
483 * DROP_VERSION_ERROR: Drop version error frame.
484 * PASS_CRC: Pass all packets with crc attached.
485 * PASS_CRC: Pass all packets with crc attached.
486 * PASS_PLCP: Pass all packets with 4 bytes PLCP attached.
487 * DROP_MCAST: Drop multicast frames.
488 * DROP_BCAST: Drop broadcast frames.
489 * ENABLE_QOS: Accept QOS data frame and parse QOS field.
490 */
491#define RXCSR0 0x0080
492#define RXCSR0_DISABLE_RX FIELD32(0x00000001)
493#define RXCSR0_DROP_CRC FIELD32(0x00000002)
494#define RXCSR0_DROP_PHYSICAL FIELD32(0x00000004)
495#define RXCSR0_DROP_CONTROL FIELD32(0x00000008)
496#define RXCSR0_DROP_NOT_TO_ME FIELD32(0x00000010)
497#define RXCSR0_DROP_TODS FIELD32(0x00000020)
498#define RXCSR0_DROP_VERSION_ERROR FIELD32(0x00000040)
499#define RXCSR0_PASS_CRC FIELD32(0x00000080)
500#define RXCSR0_PASS_PLCP FIELD32(0x00000100)
501#define RXCSR0_DROP_MCAST FIELD32(0x00000200)
502#define RXCSR0_DROP_BCAST FIELD32(0x00000400)
503#define RXCSR0_ENABLE_QOS FIELD32(0x00000800)
504
505/*
506 * RXCSR1: RX descriptor configuration register.
507 * RXD_SIZE: Rx descriptor size, default is 32b.
508 * NUM_RXD: Number of rx entries in ring.
509 */
510#define RXCSR1 0x0084
511#define RXCSR1_RXD_SIZE FIELD32(0x000000ff)
512#define RXCSR1_NUM_RXD FIELD32(0x0000ff00)
513
514/*
515 * RXCSR2: RX Ring base address register.
516 */
517#define RXCSR2 0x0088
518#define RXCSR2_RX_RING_REGISTER FIELD32(0xffffffff)
519
520/*
521 * RXCSR3: BBP ID register for Rx operation.
522 * BBP_ID#: BBP register # id.
523 * BBP_ID#_VALID: BBP register # id is valid or not.
524 */
525#define RXCSR3 0x0090
526#define RXCSR3_BBP_ID0 FIELD32(0x0000007f)
527#define RXCSR3_BBP_ID0_VALID FIELD32(0x00000080)
528#define RXCSR3_BBP_ID1 FIELD32(0x00007f00)
529#define RXCSR3_BBP_ID1_VALID FIELD32(0x00008000)
530#define RXCSR3_BBP_ID2 FIELD32(0x007f0000)
531#define RXCSR3_BBP_ID2_VALID FIELD32(0x00800000)
532#define RXCSR3_BBP_ID3 FIELD32(0x7f000000)
533#define RXCSR3_BBP_ID3_VALID FIELD32(0x80000000)
534
535/*
536 * ARCSR1: Auto Responder PLCP config register 1.
537 * AR_BBP_DATA#: Auto responder BBP register # data.
538 * AR_BBP_ID#: Auto responder BBP register # Id.
539 */
540#define ARCSR1 0x009c
541#define ARCSR1_AR_BBP_DATA2 FIELD32(0x000000ff)
542#define ARCSR1_AR_BBP_ID2 FIELD32(0x0000ff00)
543#define ARCSR1_AR_BBP_DATA3 FIELD32(0x00ff0000)
544#define ARCSR1_AR_BBP_ID3 FIELD32(0xff000000)
545
546/*
547 * Miscellaneous Registers.
548 * Some values are set in TU, whereas 1 TU == 1024 us.
549
550 */
551
552/*
553 * PCICSR: PCI control register.
554 * BIG_ENDIAN: 1: big endian, 0: little endian.
555 * RX_TRESHOLD: Rx threshold in dw to start pci access
556 * 0: 16dw (default), 1: 8dw, 2: 4dw, 3: 32dw.
557 * TX_TRESHOLD: Tx threshold in dw to start pci access
558 * 0: 0dw (default), 1: 1dw, 2: 4dw, 3: forward.
559 * BURST_LENTH: Pci burst length 0: 4dw (default, 1: 8dw, 2: 16dw, 3:32dw.
560 * ENABLE_CLK: Enable clk_run, pci clock can't going down to non-operational.
561 * READ_MULTIPLE: Enable memory read multiple.
562 * WRITE_INVALID: Enable memory write & invalid.
563 */
564#define PCICSR 0x008c
565#define PCICSR_BIG_ENDIAN FIELD32(0x00000001)
566#define PCICSR_RX_TRESHOLD FIELD32(0x00000006)
567#define PCICSR_TX_TRESHOLD FIELD32(0x00000018)
568#define PCICSR_BURST_LENTH FIELD32(0x00000060)
569#define PCICSR_ENABLE_CLK FIELD32(0x00000080)
570#define PCICSR_READ_MULTIPLE FIELD32(0x00000100)
571#define PCICSR_WRITE_INVALID FIELD32(0x00000200)
572
573/*
574 * CNT0: FCS error count.
575 * FCS_ERROR: FCS error count, cleared when read.
576 */
577#define CNT0 0x00a0
578#define CNT0_FCS_ERROR FIELD32(0x0000ffff)
579
580/*
581 * Statistic Register.
582 * CNT1: PLCP error count.
583 * CNT2: Long error count.
584 */
585#define TIMECSR2 0x00a8
586#define CNT1 0x00ac
587#define CNT2 0x00b0
588#define TIMECSR3 0x00b4
589
590/*
591 * CNT3: CCA false alarm count.
592 */
593#define CNT3 0x00b8
594#define CNT3_FALSE_CCA FIELD32(0x0000ffff)
595
596/*
597 * Statistic Register.
598 * CNT4: Rx FIFO overflow count.
599 * CNT5: Tx FIFO underrun count.
600 */
601#define CNT4 0x00bc
602#define CNT5 0x00c0
603
604/*
605 * Baseband Control Register.
606 */
607
608/*
609 * PWRCSR0: Power mode configuration register.
610 */
611#define PWRCSR0 0x00c4
612
613/*
614 * Power state transition time registers.
615 */
616#define PSCSR0 0x00c8
617#define PSCSR1 0x00cc
618#define PSCSR2 0x00d0
619#define PSCSR3 0x00d4
620
621/*
622 * PWRCSR1: Manual power control / status register.
623 * Allowed state: 0 deep_sleep, 1: sleep, 2: standby, 3: awake.
624 * SET_STATE: Set state. Write 1 to trigger, self cleared.
625 * BBP_DESIRE_STATE: BBP desired state.
626 * RF_DESIRE_STATE: RF desired state.
627 * BBP_CURR_STATE: BBP current state.
628 * RF_CURR_STATE: RF current state.
629 * PUT_TO_SLEEP: Put to sleep. Write 1 to trigger, self cleared.
630 */
631#define PWRCSR1 0x00d8
632#define PWRCSR1_SET_STATE FIELD32(0x00000001)
633#define PWRCSR1_BBP_DESIRE_STATE FIELD32(0x00000006)
634#define PWRCSR1_RF_DESIRE_STATE FIELD32(0x00000018)
635#define PWRCSR1_BBP_CURR_STATE FIELD32(0x00000060)
636#define PWRCSR1_RF_CURR_STATE FIELD32(0x00000180)
637#define PWRCSR1_PUT_TO_SLEEP FIELD32(0x00000200)
638
639/*
640 * TIMECSR: Timer control register.
641 * US_COUNT: 1 us timer count in units of clock cycles.
642 * US_64_COUNT: 64 us timer count in units of 1 us timer.
643 * BEACON_EXPECT: Beacon expect window.
644 */
645#define TIMECSR 0x00dc
646#define TIMECSR_US_COUNT FIELD32(0x000000ff)
647#define TIMECSR_US_64_COUNT FIELD32(0x0000ff00)
648#define TIMECSR_BEACON_EXPECT FIELD32(0x00070000)
649
650/*
651 * MACCSR0: MAC configuration register 0.
652 */
653#define MACCSR0 0x00e0
654
655/*
656 * MACCSR1: MAC configuration register 1.
657 * KICK_RX: Kick one-shot rx in one-shot rx mode.
658 * ONESHOT_RXMODE: Enable one-shot rx mode for debugging.
659 * BBPRX_RESET_MODE: Ralink bbp rx reset mode.
660 * AUTO_TXBBP: Auto tx logic access bbp control register.
661 * AUTO_RXBBP: Auto rx logic access bbp control register.
662 * LOOPBACK: Loopback mode. 0: normal, 1: internal, 2: external, 3:rsvd.
663 * INTERSIL_IF: Intersil if calibration pin.
664 */
665#define MACCSR1 0x00e4
666#define MACCSR1_KICK_RX FIELD32(0x00000001)
667#define MACCSR1_ONESHOT_RXMODE FIELD32(0x00000002)
668#define MACCSR1_BBPRX_RESET_MODE FIELD32(0x00000004)
669#define MACCSR1_AUTO_TXBBP FIELD32(0x00000008)
670#define MACCSR1_AUTO_RXBBP FIELD32(0x00000010)
671#define MACCSR1_LOOPBACK FIELD32(0x00000060)
672#define MACCSR1_INTERSIL_IF FIELD32(0x00000080)
673
674/*
675 * RALINKCSR: Ralink Rx auto-reset BBCR.
676 * AR_BBP_DATA#: Auto reset BBP register # data.
677 * AR_BBP_ID#: Auto reset BBP register # id.
678 */
679#define RALINKCSR 0x00e8
680#define RALINKCSR_AR_BBP_DATA0 FIELD32(0x000000ff)
681#define RALINKCSR_AR_BBP_ID0 FIELD32(0x00007f00)
682#define RALINKCSR_AR_BBP_VALID0 FIELD32(0x00008000)
683#define RALINKCSR_AR_BBP_DATA1 FIELD32(0x00ff0000)
684#define RALINKCSR_AR_BBP_ID1 FIELD32(0x7f000000)
685#define RALINKCSR_AR_BBP_VALID1 FIELD32(0x80000000)
686
687/*
688 * BCNCSR: Beacon interval control register.
689 * CHANGE: Write one to change beacon interval.
690 * DELTATIME: The delta time value.
691 * NUM_BEACON: Number of beacon according to mode.
692 * MODE: Please refer to asic specs.
693 * PLUS: Plus or minus delta time value.
694 */
695#define BCNCSR 0x00ec
696#define BCNCSR_CHANGE FIELD32(0x00000001)
697#define BCNCSR_DELTATIME FIELD32(0x0000001e)
698#define BCNCSR_NUM_BEACON FIELD32(0x00001fe0)
699#define BCNCSR_MODE FIELD32(0x00006000)
700#define BCNCSR_PLUS FIELD32(0x00008000)
701
702/*
703 * BBP / RF / IF Control Register.
704 */
705
706/*
707 * BBPCSR: BBP serial control register.
708 * VALUE: Register value to program into BBP.
709 * REGNUM: Selected BBP register.
710 * BUSY: 1: asic is busy execute BBP programming.
711 * WRITE_CONTROL: 1: write BBP, 0: read BBP.
712 */
713#define BBPCSR 0x00f0
714#define BBPCSR_VALUE FIELD32(0x000000ff)
715#define BBPCSR_REGNUM FIELD32(0x00007f00)
716#define BBPCSR_BUSY FIELD32(0x00008000)
717#define BBPCSR_WRITE_CONTROL FIELD32(0x00010000)
718
719/*
720 * RFCSR: RF serial control register.
721 * VALUE: Register value + id to program into rf/if.
722 * NUMBER_OF_BITS: Number of bits used in value (i:20, rfmd:22).
723 * IF_SELECT: Chip to program: 0: rf, 1: if.
724 * PLL_LD: Rf pll_ld status.
725 * BUSY: 1: asic is busy execute rf programming.
726 */
727#define RFCSR 0x00f4
728#define RFCSR_VALUE FIELD32(0x00ffffff)
729#define RFCSR_NUMBER_OF_BITS FIELD32(0x1f000000)
730#define RFCSR_IF_SELECT FIELD32(0x20000000)
731#define RFCSR_PLL_LD FIELD32(0x40000000)
732#define RFCSR_BUSY FIELD32(0x80000000)
733
734/*
735 * LEDCSR: LED control register.
736 * ON_PERIOD: On period, default 70ms.
737 * OFF_PERIOD: Off period, default 30ms.
738 * LINK: 0: linkoff, 1: linkup.
739 * ACTIVITY: 0: idle, 1: active.
740 * LINK_POLARITY: 0: active low, 1: active high.
741 * ACTIVITY_POLARITY: 0: active low, 1: active high.
742 * LED_DEFAULT: LED state for "enable" 0: ON, 1: OFF.
743 */
744#define LEDCSR 0x00f8
745#define LEDCSR_ON_PERIOD FIELD32(0x000000ff)
746#define LEDCSR_OFF_PERIOD FIELD32(0x0000ff00)
747#define LEDCSR_LINK FIELD32(0x00010000)
748#define LEDCSR_ACTIVITY FIELD32(0x00020000)
749#define LEDCSR_LINK_POLARITY FIELD32(0x00040000)
750#define LEDCSR_ACTIVITY_POLARITY FIELD32(0x00080000)
751#define LEDCSR_LED_DEFAULT FIELD32(0x00100000)
752
753/*
Ivo van Doorn84263b02008-07-06 17:09:48 +0200754 * SECCSR3: AES control register.
Ivo van Doorn95ea3622007-09-25 17:57:13 -0700755 */
756#define SECCSR3 0x00fc
757
758/*
759 * ASIC pointer information.
760 * RXPTR: Current RX ring address.
761 * TXPTR: Current Tx ring address.
762 * PRIPTR: Current Priority ring address.
763 * ATIMPTR: Current ATIM ring address.
764 */
765#define RXPTR 0x0100
766#define TXPTR 0x0104
767#define PRIPTR 0x0108
768#define ATIMPTR 0x010c
769
770/*
771 * TXACKCSR0: TX ACK timeout.
772 */
773#define TXACKCSR0 0x0110
774
775/*
776 * ACK timeout count registers.
777 * ACKCNT0: TX ACK timeout count.
778 * ACKCNT1: RX ACK timeout count.
779 */
780#define ACKCNT0 0x0114
781#define ACKCNT1 0x0118
782
783/*
784 * GPIO and others.
785 */
786
787/*
788 * GPIOCSR: GPIO control register.
789 */
790#define GPIOCSR 0x0120
791#define GPIOCSR_BIT0 FIELD32(0x00000001)
792#define GPIOCSR_BIT1 FIELD32(0x00000002)
793#define GPIOCSR_BIT2 FIELD32(0x00000004)
794#define GPIOCSR_BIT3 FIELD32(0x00000008)
795#define GPIOCSR_BIT4 FIELD32(0x00000010)
796#define GPIOCSR_BIT5 FIELD32(0x00000020)
797#define GPIOCSR_BIT6 FIELD32(0x00000040)
798#define GPIOCSR_BIT7 FIELD32(0x00000080)
799#define GPIOCSR_DIR0 FIELD32(0x00000100)
800#define GPIOCSR_DIR1 FIELD32(0x00000200)
801#define GPIOCSR_DIR2 FIELD32(0x00000400)
802#define GPIOCSR_DIR3 FIELD32(0x00000800)
803#define GPIOCSR_DIR4 FIELD32(0x00001000)
804#define GPIOCSR_DIR5 FIELD32(0x00002000)
805#define GPIOCSR_DIR6 FIELD32(0x00004000)
806#define GPIOCSR_DIR7 FIELD32(0x00008000)
807
808/*
809 * FIFO pointer registers.
810 * FIFOCSR0: TX FIFO pointer.
811 * FIFOCSR1: RX FIFO pointer.
812 */
813#define FIFOCSR0 0x0128
814#define FIFOCSR1 0x012c
815
816/*
817 * BCNCSR1: Tx BEACON offset time control register.
818 * PRELOAD: Beacon timer offset in units of usec.
819 * BEACON_CWMIN: 2^CwMin.
820 */
821#define BCNCSR1 0x0130
822#define BCNCSR1_PRELOAD FIELD32(0x0000ffff)
823#define BCNCSR1_BEACON_CWMIN FIELD32(0x000f0000)
824
825/*
826 * MACCSR2: TX_PE to RX_PE turn-around time control register
827 * DELAY: RX_PE low width, in units of pci clock cycle.
828 */
829#define MACCSR2 0x0134
830#define MACCSR2_DELAY FIELD32(0x000000ff)
831
832/*
833 * TESTCSR: TEST mode selection register.
834 */
835#define TESTCSR 0x0138
836
837/*
838 * ARCSR2: 1 Mbps ACK/CTS PLCP.
839 */
840#define ARCSR2 0x013c
841#define ARCSR2_SIGNAL FIELD32(0x000000ff)
842#define ARCSR2_SERVICE FIELD32(0x0000ff00)
843#define ARCSR2_LENGTH FIELD32(0xffff0000)
844
845/*
846 * ARCSR3: 2 Mbps ACK/CTS PLCP.
847 */
848#define ARCSR3 0x0140
849#define ARCSR3_SIGNAL FIELD32(0x000000ff)
850#define ARCSR3_SERVICE FIELD32(0x0000ff00)
851#define ARCSR3_LENGTH FIELD32(0xffff0000)
852
853/*
854 * ARCSR4: 5.5 Mbps ACK/CTS PLCP.
855 */
856#define ARCSR4 0x0144
857#define ARCSR4_SIGNAL FIELD32(0x000000ff)
858#define ARCSR4_SERVICE FIELD32(0x0000ff00)
859#define ARCSR4_LENGTH FIELD32(0xffff0000)
860
861/*
862 * ARCSR5: 11 Mbps ACK/CTS PLCP.
863 */
864#define ARCSR5 0x0148
865#define ARCSR5_SIGNAL FIELD32(0x000000ff)
866#define ARCSR5_SERVICE FIELD32(0x0000ff00)
867#define ARCSR5_LENGTH FIELD32(0xffff0000)
868
869/*
870 * ARTCSR0: CCK ACK/CTS payload consumed time for 1/2/5.5/11 mbps.
871 */
872#define ARTCSR0 0x014c
873#define ARTCSR0_ACK_CTS_11MBS FIELD32(0x000000ff)
874#define ARTCSR0_ACK_CTS_5_5MBS FIELD32(0x0000ff00)
875#define ARTCSR0_ACK_CTS_2MBS FIELD32(0x00ff0000)
876#define ARTCSR0_ACK_CTS_1MBS FIELD32(0xff000000)
877
878
879/*
880 * ARTCSR1: OFDM ACK/CTS payload consumed time for 6/9/12/18 mbps.
881 */
882#define ARTCSR1 0x0150
883#define ARTCSR1_ACK_CTS_6MBS FIELD32(0x000000ff)
884#define ARTCSR1_ACK_CTS_9MBS FIELD32(0x0000ff00)
885#define ARTCSR1_ACK_CTS_12MBS FIELD32(0x00ff0000)
886#define ARTCSR1_ACK_CTS_18MBS FIELD32(0xff000000)
887
888/*
889 * ARTCSR2: OFDM ACK/CTS payload consumed time for 24/36/48/54 mbps.
890 */
891#define ARTCSR2 0x0154
892#define ARTCSR2_ACK_CTS_24MBS FIELD32(0x000000ff)
893#define ARTCSR2_ACK_CTS_36MBS FIELD32(0x0000ff00)
894#define ARTCSR2_ACK_CTS_48MBS FIELD32(0x00ff0000)
895#define ARTCSR2_ACK_CTS_54MBS FIELD32(0xff000000)
896
897/*
Ivo van Doorn84263b02008-07-06 17:09:48 +0200898 * SECCSR1: WEP control register.
Ivo van Doorn95ea3622007-09-25 17:57:13 -0700899 * KICK_ENCRYPT: Kick encryption engine, self-clear.
900 * ONE_SHOT: 0: ring mode, 1: One shot only mode.
901 * DESC_ADDRESS: Descriptor physical address of frame.
902 */
903#define SECCSR1 0x0158
904#define SECCSR1_KICK_ENCRYPT FIELD32(0x00000001)
905#define SECCSR1_ONE_SHOT FIELD32(0x00000002)
906#define SECCSR1_DESC_ADDRESS FIELD32(0xfffffffc)
907
908/*
909 * BBPCSR1: BBP TX configuration.
910 */
911#define BBPCSR1 0x015c
912#define BBPCSR1_CCK FIELD32(0x00000003)
913#define BBPCSR1_CCK_FLIP FIELD32(0x00000004)
914#define BBPCSR1_OFDM FIELD32(0x00030000)
915#define BBPCSR1_OFDM_FLIP FIELD32(0x00040000)
916
917/*
918 * Dual band configuration registers.
919 * DBANDCSR0: Dual band configuration register 0.
920 * DBANDCSR1: Dual band configuration register 1.
921 */
922#define DBANDCSR0 0x0160
923#define DBANDCSR1 0x0164
924
925/*
926 * BBPPCSR: BBP Pin control register.
927 */
928#define BBPPCSR 0x0168
929
930/*
931 * MAC special debug mode selection registers.
932 * DBGSEL0: MAC special debug mode selection register 0.
933 * DBGSEL1: MAC special debug mode selection register 1.
934 */
935#define DBGSEL0 0x016c
936#define DBGSEL1 0x0170
937
938/*
939 * BISTCSR: BBP BIST register.
940 */
941#define BISTCSR 0x0174
942
943/*
944 * Multicast filter registers.
945 * MCAST0: Multicast filter register 0.
946 * MCAST1: Multicast filter register 1.
947 */
948#define MCAST0 0x0178
949#define MCAST1 0x017c
950
951/*
952 * UART registers.
953 * UARTCSR0: UART1 TX register.
954 * UARTCSR1: UART1 RX register.
955 * UARTCSR3: UART1 frame control register.
956 * UARTCSR4: UART1 buffer control register.
957 * UART2CSR0: UART2 TX register.
958 * UART2CSR1: UART2 RX register.
959 * UART2CSR3: UART2 frame control register.
960 * UART2CSR4: UART2 buffer control register.
961 */
962#define UARTCSR0 0x0180
963#define UARTCSR1 0x0184
964#define UARTCSR3 0x0188
965#define UARTCSR4 0x018c
966#define UART2CSR0 0x0190
967#define UART2CSR1 0x0194
968#define UART2CSR3 0x0198
969#define UART2CSR4 0x019c
970
971/*
972 * BBP registers.
973 * The wordsize of the BBP is 8 bits.
974 */
975
976/*
977 * R2: TX antenna control
978 */
979#define BBP_R2_TX_ANTENNA FIELD8(0x03)
980#define BBP_R2_TX_IQ_FLIP FIELD8(0x04)
981
982/*
983 * R14: RX antenna control
984 */
985#define BBP_R14_RX_ANTENNA FIELD8(0x03)
986#define BBP_R14_RX_IQ_FLIP FIELD8(0x04)
987
988/*
989 * BBP_R70
990 */
991#define BBP_R70_JAPAN_FILTER FIELD8(0x08)
992
993/*
994 * RF registers
995 */
996
997/*
998 * RF 1
999 */
1000#define RF1_TUNER FIELD32(0x00020000)
1001
1002/*
1003 * RF 3
1004 */
1005#define RF3_TUNER FIELD32(0x00000100)
1006#define RF3_TXPOWER FIELD32(0x00003e00)
1007
1008/*
1009 * EEPROM content.
1010 * The wordsize of the EEPROM is 16 bits.
1011 */
1012
1013/*
1014 * HW MAC address.
1015 */
1016#define EEPROM_MAC_ADDR_0 0x0002
1017#define EEPROM_MAC_ADDR_BYTE0 FIELD16(0x00ff)
1018#define EEPROM_MAC_ADDR_BYTE1 FIELD16(0xff00)
1019#define EEPROM_MAC_ADDR1 0x0003
1020#define EEPROM_MAC_ADDR_BYTE2 FIELD16(0x00ff)
1021#define EEPROM_MAC_ADDR_BYTE3 FIELD16(0xff00)
1022#define EEPROM_MAC_ADDR_2 0x0004
1023#define EEPROM_MAC_ADDR_BYTE4 FIELD16(0x00ff)
1024#define EEPROM_MAC_ADDR_BYTE5 FIELD16(0xff00)
1025
1026/*
1027 * EEPROM antenna.
1028 * ANTENNA_NUM: Number of antenna's.
1029 * TX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B.
1030 * RX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B.
1031 * LED_MODE: 0: default, 1: TX/RX activity,2: Single (ignore link), 3: rsvd.
1032 * DYN_TXAGC: Dynamic TX AGC control.
1033 * HARDWARE_RADIO: 1: Hardware controlled radio. Read GPIO0.
1034 * RF_TYPE: Rf_type of this adapter.
1035 */
1036#define EEPROM_ANTENNA 0x10
1037#define EEPROM_ANTENNA_NUM FIELD16(0x0003)
1038#define EEPROM_ANTENNA_TX_DEFAULT FIELD16(0x000c)
1039#define EEPROM_ANTENNA_RX_DEFAULT FIELD16(0x0030)
1040#define EEPROM_ANTENNA_LED_MODE FIELD16(0x01c0)
1041#define EEPROM_ANTENNA_DYN_TXAGC FIELD16(0x0200)
1042#define EEPROM_ANTENNA_HARDWARE_RADIO FIELD16(0x0400)
1043#define EEPROM_ANTENNA_RF_TYPE FIELD16(0xf800)
1044
1045/*
1046 * EEPROM NIC config.
1047 * CARDBUS_ACCEL: 0: enable, 1: disable.
1048 * DYN_BBP_TUNE: 0: enable, 1: disable.
1049 * CCK_TX_POWER: CCK TX power compensation.
1050 */
1051#define EEPROM_NIC 0x11
1052#define EEPROM_NIC_CARDBUS_ACCEL FIELD16(0x0001)
1053#define EEPROM_NIC_DYN_BBP_TUNE FIELD16(0x0002)
1054#define EEPROM_NIC_CCK_TX_POWER FIELD16(0x000c)
1055
1056/*
1057 * EEPROM geography.
1058 * GEO: Default geography setting for device.
1059 */
1060#define EEPROM_GEOGRAPHY 0x12
1061#define EEPROM_GEOGRAPHY_GEO FIELD16(0x0f00)
1062
1063/*
1064 * EEPROM BBP.
1065 */
1066#define EEPROM_BBP_START 0x13
1067#define EEPROM_BBP_SIZE 16
1068#define EEPROM_BBP_VALUE FIELD16(0x00ff)
1069#define EEPROM_BBP_REG_ID FIELD16(0xff00)
1070
1071/*
1072 * EEPROM TXPOWER
1073 */
1074#define EEPROM_TXPOWER_START 0x23
1075#define EEPROM_TXPOWER_SIZE 7
1076#define EEPROM_TXPOWER_1 FIELD16(0x00ff)
1077#define EEPROM_TXPOWER_2 FIELD16(0xff00)
1078
1079/*
1080 * RSSI <-> dBm offset calibration
1081 */
1082#define EEPROM_CALIBRATE_OFFSET 0x3e
1083#define EEPROM_CALIBRATE_OFFSET_RSSI FIELD16(0x00ff)
1084
1085/*
1086 * DMA descriptor defines.
1087 */
Ivo van Doorn4bd7c452008-01-24 00:48:03 -08001088#define TXD_DESC_SIZE ( 11 * sizeof(__le32) )
1089#define RXD_DESC_SIZE ( 11 * sizeof(__le32) )
Ivo van Doorn95ea3622007-09-25 17:57:13 -07001090
1091/*
1092 * TX descriptor format for TX, PRIO, ATIM and Beacon Ring.
1093 */
1094
1095/*
1096 * Word0
1097 */
1098#define TXD_W0_OWNER_NIC FIELD32(0x00000001)
1099#define TXD_W0_VALID FIELD32(0x00000002)
1100#define TXD_W0_RESULT FIELD32(0x0000001c)
1101#define TXD_W0_RETRY_COUNT FIELD32(0x000000e0)
1102#define TXD_W0_MORE_FRAG FIELD32(0x00000100)
1103#define TXD_W0_ACK FIELD32(0x00000200)
1104#define TXD_W0_TIMESTAMP FIELD32(0x00000400)
1105#define TXD_W0_OFDM FIELD32(0x00000800)
1106#define TXD_W0_CIPHER_OWNER FIELD32(0x00001000)
1107#define TXD_W0_IFS FIELD32(0x00006000)
1108#define TXD_W0_RETRY_MODE FIELD32(0x00008000)
1109#define TXD_W0_DATABYTE_COUNT FIELD32(0x0fff0000)
1110#define TXD_W0_CIPHER_ALG FIELD32(0xe0000000)
1111
1112/*
1113 * Word1
1114 */
1115#define TXD_W1_BUFFER_ADDRESS FIELD32(0xffffffff)
1116
1117/*
1118 * Word2
1119 */
1120#define TXD_W2_IV_OFFSET FIELD32(0x0000003f)
1121#define TXD_W2_AIFS FIELD32(0x000000c0)
1122#define TXD_W2_CWMIN FIELD32(0x00000f00)
1123#define TXD_W2_CWMAX FIELD32(0x0000f000)
1124
1125/*
1126 * Word3: PLCP information
1127 */
1128#define TXD_W3_PLCP_SIGNAL FIELD32(0x000000ff)
1129#define TXD_W3_PLCP_SERVICE FIELD32(0x0000ff00)
1130#define TXD_W3_PLCP_LENGTH_LOW FIELD32(0x00ff0000)
1131#define TXD_W3_PLCP_LENGTH_HIGH FIELD32(0xff000000)
1132
1133/*
1134 * Word4
1135 */
1136#define TXD_W4_IV FIELD32(0xffffffff)
1137
1138/*
1139 * Word5
1140 */
1141#define TXD_W5_EIV FIELD32(0xffffffff)
1142
1143/*
1144 * Word6-9: Key
1145 */
1146#define TXD_W6_KEY FIELD32(0xffffffff)
1147#define TXD_W7_KEY FIELD32(0xffffffff)
1148#define TXD_W8_KEY FIELD32(0xffffffff)
1149#define TXD_W9_KEY FIELD32(0xffffffff)
1150
1151/*
1152 * Word10
1153 */
1154#define TXD_W10_RTS FIELD32(0x00000001)
1155#define TXD_W10_TX_RATE FIELD32(0x000000fe)
1156
1157/*
1158 * RX descriptor format for RX Ring.
1159 */
1160
1161/*
1162 * Word0
1163 */
1164#define RXD_W0_OWNER_NIC FIELD32(0x00000001)
1165#define RXD_W0_UNICAST_TO_ME FIELD32(0x00000002)
1166#define RXD_W0_MULTICAST FIELD32(0x00000004)
1167#define RXD_W0_BROADCAST FIELD32(0x00000008)
1168#define RXD_W0_MY_BSS FIELD32(0x00000010)
1169#define RXD_W0_CRC_ERROR FIELD32(0x00000020)
1170#define RXD_W0_OFDM FIELD32(0x00000040)
1171#define RXD_W0_PHYSICAL_ERROR FIELD32(0x00000080)
1172#define RXD_W0_CIPHER_OWNER FIELD32(0x00000100)
1173#define RXD_W0_ICV_ERROR FIELD32(0x00000200)
1174#define RXD_W0_IV_OFFSET FIELD32(0x0000fc00)
1175#define RXD_W0_DATABYTE_COUNT FIELD32(0x0fff0000)
1176#define RXD_W0_CIPHER_ALG FIELD32(0xe0000000)
1177
1178/*
1179 * Word1
1180 */
1181#define RXD_W1_BUFFER_ADDRESS FIELD32(0xffffffff)
1182
1183/*
1184 * Word2
1185 */
1186#define RXD_W2_SIGNAL FIELD32(0x000000ff)
1187#define RXD_W2_RSSI FIELD32(0x0000ff00)
1188#define RXD_W2_TA FIELD32(0xffff0000)
1189
1190/*
1191 * Word3
1192 */
1193#define RXD_W3_TA FIELD32(0xffffffff)
1194
1195/*
1196 * Word4
1197 */
1198#define RXD_W4_IV FIELD32(0xffffffff)
1199
1200/*
1201 * Word5
1202 */
1203#define RXD_W5_EIV FIELD32(0xffffffff)
1204
1205/*
1206 * Word6-9: Key
1207 */
1208#define RXD_W6_KEY FIELD32(0xffffffff)
1209#define RXD_W7_KEY FIELD32(0xffffffff)
1210#define RXD_W8_KEY FIELD32(0xffffffff)
1211#define RXD_W9_KEY FIELD32(0xffffffff)
1212
1213/*
1214 * Word10
1215 */
1216#define RXD_W10_DROP FIELD32(0x00000001)
1217
1218/*
Ivo van Doornde99ff82008-02-17 17:34:26 +01001219 * Macro's for converting txpower from EEPROM to mac80211 value
1220 * and from mac80211 value to register value.
Ivo van Doorn95ea3622007-09-25 17:57:13 -07001221 */
1222#define MIN_TXPOWER 0
1223#define MAX_TXPOWER 31
1224#define DEFAULT_TXPOWER 24
1225
Ivo van Doorn8c5e7a52008-08-04 16:38:47 +02001226#define TXPOWER_FROM_DEV(__txpower) \
1227 (((u8)(__txpower)) > MAX_TXPOWER) ? DEFAULT_TXPOWER : (__txpower)
Ivo van Doorn95ea3622007-09-25 17:57:13 -07001228
Ivo van Doorn8c5e7a52008-08-04 16:38:47 +02001229#define TXPOWER_TO_DEV(__txpower) \
1230 clamp_t(char, __txpower, MIN_TXPOWER, MAX_TXPOWER)
Ivo van Doorn95ea3622007-09-25 17:57:13 -07001231
1232#endif /* RT2500PCI_H */