Gitiles
Code Review Sign In
gerrit-public.fairphone.software / kernel / msm-4.9 / 8d06afab73a75f40ae2864e6c296356bab1ab473 / . / drivers / char / ip2main.c
blob: 9e4e26aef94ea84d9824c0b61016f78f02bb1884 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]1/*
2*
3* (c) 1999 by Computone Corporation
4*
5********************************************************************************
6*
7* PACKAGE: Linux tty Device Driver for IntelliPort family of multiport
8* serial I/O controllers.
9*
10* DESCRIPTION: Mainline code for the device driver
11*
12*******************************************************************************/
13// ToDo:
14//
15// Fix the immediate DSS_NOW problem.
16// Work over the channel stats return logic in ip2_ipl_ioctl so they
17// make sense for all 256 possible channels and so the user space
18// utilities will compile and work properly.
19//
20// Done:
21//
22// 1.2.14 /\/\|=mhw=|\/\/
23// Added bounds checking to ip2_ipl_ioctl to avoid potential terroristic acts.
24// Changed the definition of ip2trace to be more consistent with kernel style
25// Thanks to Andreas Dilger <adilger@turbolabs.com> for these updates
26//
27// 1.2.13 /\/\|=mhw=|\/\/
28// DEVFS: Renamed ttf/{n} to tts/F{n} and cuf/{n} to cua/F{n} to conform
29// to agreed devfs serial device naming convention.
30//
31// 1.2.12 /\/\|=mhw=|\/\/
32// Cleaned up some remove queue cut and paste errors
33//
34// 1.2.11 /\/\|=mhw=|\/\/
35// Clean up potential NULL pointer dereferences
36// Clean up devfs registration
37// Add kernel command line parsing for io and irq
38// Compile defaults for io and irq are now set in ip2.c not ip2/ip2.h!
39// Reworked poll_only hack for explicit parameter setting
40// You must now EXPLICITLY set poll_only = 1 or set all irqs to 0
41// Merged ip2_loadmain and old_ip2_init
42// Converted all instances of interruptible_sleep_on into queue calls
43// Most of these had no race conditions but better to clean up now
44//
45// 1.2.10 /\/\|=mhw=|\/\/
46// Fixed the bottom half interrupt handler and enabled USE_IQI
47// to split the interrupt handler into a formal top-half / bottom-half
48// Fixed timing window on high speed processors that queued messages to
49// the outbound mail fifo faster than the board could handle.
50//
51// 1.2.9
52// Four box EX was barfing on >128k kmalloc, made structure smaller by
53// reducing output buffer size
54//
55// 1.2.8
56// Device file system support (MHW)
57//
58// 1.2.7
59// Fixed
60// Reload of ip2 without unloading ip2main hangs system on cat of /proc/modules
61//
62// 1.2.6
63//Fixes DCD problems
64// DCD was not reported when CLOCAL was set on call to TIOCMGET
65//
66//Enhancements:
67// TIOCMGET requests and waits for status return
68// No DSS interrupts enabled except for DCD when needed
69//
70// For internal use only
71//
72//#define IP2DEBUG_INIT
73//#define IP2DEBUG_OPEN
74//#define IP2DEBUG_WRITE
75//#define IP2DEBUG_READ
76//#define IP2DEBUG_IOCTL
77//#define IP2DEBUG_IPL
78
79//#define IP2DEBUG_TRACE
80//#define DEBUG_FIFO
81
82/************/
83/* Includes */
84/************/
85#include <linux/config.h>
86
87#include <linux/ctype.h>
88#include <linux/string.h>
89#include <linux/fcntl.h>
90#include <linux/errno.h>
91#include <linux/module.h>
92#include <linux/signal.h>
93#include <linux/sched.h>
94#include <linux/devfs_fs_kernel.h>
95#include <linux/timer.h>
96#include <linux/interrupt.h>
97#include <linux/pci.h>
98#include <linux/mm.h>
99#include <linux/slab.h>
100#include <linux/major.h>
101#include <linux/wait.h>
102#include <linux/device.h>
103
104#include <linux/tty.h>
105#include <linux/tty_flip.h>
106#include <linux/termios.h>
107#include <linux/tty_driver.h>
108#include <linux/serial.h>
109#include <linux/ptrace.h>
110#include <linux/ioport.h>
111
112#include <linux/cdk.h>
113#include <linux/comstats.h>
114#include <linux/delay.h>
115#include <linux/bitops.h>
116
117#include <asm/system.h>
118#include <asm/io.h>
119#include <asm/irq.h>
120
121#include <linux/vmalloc.h>
122#include <linux/init.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]123
124#include <asm/uaccess.h>
125
126#include "./ip2/ip2types.h"
127#include "./ip2/ip2trace.h"
128#include "./ip2/ip2ioctl.h"
129#include "./ip2/ip2.h"
130#include "./ip2/i2ellis.h"
131#include "./ip2/i2lib.h"
132
133/*****************
134 * /proc/ip2mem *
135 *****************/
136
137#include <linux/proc_fs.h>
138
139static int ip2_read_procmem(char *, char **, off_t, int);
140static int ip2_read_proc(char *, char **, off_t, int, int *, void * );
141
142/********************/
143/* Type Definitions */
144/********************/
145
146/*************/
147/* Constants */
148/*************/
149
150/* String constants to identify ourselves */
151static char *pcName = "Computone IntelliPort Plus multiport driver";
152static char *pcVersion = "1.2.14";
153
154/* String constants for port names */
155static char *pcDriver_name = "ip2";
156static char *pcIpl = "ip2ipl";
157
158/* Serial subtype definitions */
159#define SERIAL_TYPE_NORMAL 1
160
161// cheezy kludge or genius - you decide?
162int ip2_loadmain(int *, int *, unsigned char *, int);
163static unsigned char *Fip_firmware;
164static int Fip_firmware_size;
165
166/***********************/
167/* Function Prototypes */
168/***********************/
169
170/* Global module entry functions */
171
172/* Private (static) functions */
173static int ip2_open(PTTY, struct file *);
174static void ip2_close(PTTY, struct file *);
175static int ip2_write(PTTY, int, const unsigned char *, int);
176static void ip2_putchar(PTTY, unsigned char);
177static void ip2_flush_chars(PTTY);
178static int ip2_write_room(PTTY);
179static int ip2_chars_in_buf(PTTY);
180static void ip2_flush_buffer(PTTY);
181static int ip2_ioctl(PTTY, struct file *, UINT, ULONG);
182static void ip2_set_termios(PTTY, struct termios *);
183static void ip2_set_line_discipline(PTTY);
184static void ip2_throttle(PTTY);
185static void ip2_unthrottle(PTTY);
186static void ip2_stop(PTTY);
187static void ip2_start(PTTY);
188static void ip2_hangup(PTTY);
189static int ip2_tiocmget(struct tty_struct *tty, struct file *file);
190static int ip2_tiocmset(struct tty_struct *tty, struct file *file,
191 unsigned int set, unsigned int clear);
192
193static void set_irq(int, int);
194static void ip2_interrupt_bh(i2eBordStrPtr pB);
195static irqreturn_t ip2_interrupt(int irq, void *dev_id, struct pt_regs * regs);
196static void ip2_poll(unsigned long arg);
197static inline void service_all_boards(void);
198static void do_input(void *p);
199static void do_status(void *p);
200
201static void ip2_wait_until_sent(PTTY,int);
202
203static void set_params (i2ChanStrPtr, struct termios *);
204static int get_serial_info(i2ChanStrPtr, struct serial_struct __user *);
205static int set_serial_info(i2ChanStrPtr, struct serial_struct __user *);
206
207static ssize_t ip2_ipl_read(struct file *, char __user *, size_t, loff_t *);
208static ssize_t ip2_ipl_write(struct file *, const char __user *, size_t, loff_t *);
209static int ip2_ipl_ioctl(struct inode *, struct file *, UINT, ULONG);
210static int ip2_ipl_open(struct inode *, struct file *);
211
212static int DumpTraceBuffer(char __user *, int);
213static int DumpFifoBuffer( char __user *, int);
214
215static void ip2_init_board(int);
216static unsigned short find_eisa_board(int);
217
218/***************/
219/* Static Data */
220/***************/
221
222static struct tty_driver *ip2_tty_driver;
223
224/* Here, then is a table of board pointers which the interrupt routine should
225 * scan through to determine who it must service.
226 */
227static unsigned short i2nBoards; // Number of boards here
228
229static i2eBordStrPtr i2BoardPtrTable[IP2_MAX_BOARDS];
230
231static i2ChanStrPtr DevTable[IP2_MAX_PORTS];
232//DevTableMem just used to save addresses for kfree
233static void *DevTableMem[IP2_MAX_BOARDS];
234
235/* This is the driver descriptor for the ip2ipl device, which is used to
236 * download the loadware to the boards.
237 */
238static struct file_operations ip2_ipl = {
239 .owner = THIS_MODULE,
240 .read = ip2_ipl_read,
241 .write = ip2_ipl_write,
242 .ioctl = ip2_ipl_ioctl,
243 .open = ip2_ipl_open,
244};
245
246static unsigned long irq_counter = 0;
247static unsigned long bh_counter = 0;
248
249// Use immediate queue to service interrupts
250#define USE_IQI
251//#define USE_IQ // PCI&2.2 needs work
252
253/* The timer_list entry for our poll routine. If interrupt operation is not
254 * selected, the board is serviced periodically to see if anything needs doing.
255 */
256#define POLL_TIMEOUT (jiffies + 1)
Ingo Molnar8d06afa2005-09-09 13:10:40 -0700[diff] [blame^]257static DEFINE_TIMER(PollTimer, ip2_poll, 0, 0);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]258static char TimerOn;
259
260#ifdef IP2DEBUG_TRACE
261/* Trace (debug) buffer data */
262#define TRACEMAX 1000
263static unsigned long tracebuf[TRACEMAX];
264static int tracestuff;
265static int tracestrip;
266static int tracewrap;
267#endif
268
269/**********/
270/* Macros */
271/**********/
272
273#if defined(MODULE) && defined(IP2DEBUG_OPEN)
274#define DBG_CNT(s) printk(KERN_DEBUG "(%s): [%x] refc=%d, ttyc=%d, modc=%x -> %s\n", \
275 tty->name,(pCh->flags),ip2_tty_driver->refcount, \
276 tty->count,/*GET_USE_COUNT(module)*/0,s)
277#else
278#define DBG_CNT(s)
279#endif
280
281/********/
282/* Code */
283/********/
284
285#include "./ip2/i2ellis.c" /* Extremely low-level interface services */
286#include "./ip2/i2cmd.c" /* Standard loadware command definitions */
287#include "./ip2/i2lib.c" /* High level interface services */
288
289/* Configuration area for modprobe */
290
291MODULE_AUTHOR("Doug McNash");
292MODULE_DESCRIPTION("Computone IntelliPort Plus Driver");
293
294static int poll_only = 0;
295
296static int Eisa_irq;
297static int Eisa_slot;
298
299static int iindx;
300static char rirqs[IP2_MAX_BOARDS];
301static int Valid_Irqs[] = { 3, 4, 5, 7, 10, 11, 12, 15, 0};
302
303/* for sysfs class support */
gregkh@suse.deca8eca62005-03-23 09:53:09 -0800[diff] [blame]304static struct class *ip2_class;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]305
306// Some functions to keep track of what irq's we have
307
308static int __init
309is_valid_irq(int irq)
310{
311 int *i = Valid_Irqs;
312
313 while ((*i != 0) && (*i != irq)) {
314 i++;
315 }
316 return (*i);
317}
318
319static void __init
320mark_requested_irq( char irq )
321{
322 rirqs[iindx++] = irq;
323}
324
325#ifdef MODULE
326static int __init
327clear_requested_irq( char irq )
328{
329 int i;
330 for ( i = 0; i < IP2_MAX_BOARDS; ++i ) {
331 if (rirqs[i] == irq) {
332 rirqs[i] = 0;
333 return 1;
334 }
335 }
336 return 0;
337}
338#endif
339
340static int __init
341have_requested_irq( char irq )
342{
343 // array init to zeros so 0 irq will not be requested as a side effect
344 int i;
345 for ( i = 0; i < IP2_MAX_BOARDS; ++i ) {
346 if (rirqs[i] == irq)
347 return 1;
348 }
349 return 0;
350}
351
352/******************************************************************************/
353/* Function: init_module() */
354/* Parameters: None */
355/* Returns: Success (0) */
356/* */
357/* Description: */
358/* This is a required entry point for an installable module. It simply calls */
359/* the driver initialisation function and returns what it returns. */
360/******************************************************************************/
361#ifdef MODULE
362int
363init_module(void)
364{
365#ifdef IP2DEBUG_INIT
366 printk (KERN_DEBUG "Loading module ...\n" );
367#endif
368 return 0;
369}
370#endif /* MODULE */
371
372/******************************************************************************/
373/* Function: cleanup_module() */
374/* Parameters: None */
375/* Returns: Nothing */
376/* */
377/* Description: */
378/* This is a required entry point for an installable module. It has to return */
379/* the device and the driver to a passive state. It should not be necessary */
380/* to reset the board fully, especially as the loadware is downloaded */
381/* externally rather than in the driver. We just want to disable the board */
382/* and clear the loadware to a reset state. To allow this there has to be a */
383/* way to detect whether the board has the loadware running at init time to */
384/* handle subsequent installations of the driver. All memory allocated by the */
385/* driver should be returned since it may be unloaded from memory. */
386/******************************************************************************/
387#ifdef MODULE
388void
389cleanup_module(void)
390{
391 int err;
392 int i;
393
394#ifdef IP2DEBUG_INIT
395 printk (KERN_DEBUG "Unloading %s: version %s\n", pcName, pcVersion );
396#endif
397 /* Stop poll timer if we had one. */
398 if ( TimerOn ) {
399 del_timer ( &PollTimer );
400 TimerOn = 0;
401 }
402
403 /* Reset the boards we have. */
404 for( i = 0; i < IP2_MAX_BOARDS; ++i ) {
405 if ( i2BoardPtrTable[i] ) {
406 iiReset( i2BoardPtrTable[i] );
407 }
408 }
409
410 /* The following is done at most once, if any boards were installed. */
411 for ( i = 0; i < IP2_MAX_BOARDS; ++i ) {
412 if ( i2BoardPtrTable[i] ) {
413 iiResetDelay( i2BoardPtrTable[i] );
414 /* free io addresses and Tibet */
415 release_region( ip2config.addr[i], 8 );
gregkh@suse.deca8eca62005-03-23 09:53:09 -0800[diff] [blame]416 class_device_destroy(ip2_class, MKDEV(IP2_IPL_MAJOR, 4 * i));
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]417 devfs_remove("ip2/ipl%d", i);
gregkh@suse.deca8eca62005-03-23 09:53:09 -0800[diff] [blame]418 class_device_destroy(ip2_class, MKDEV(IP2_IPL_MAJOR, 4 * i + 1));
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]419 devfs_remove("ip2/stat%d", i);
420 }
421 /* Disable and remove interrupt handler. */
422 if ( (ip2config.irq[i] > 0) && have_requested_irq(ip2config.irq[i]) ) {
423 free_irq ( ip2config.irq[i], (void *)&pcName);
424 clear_requested_irq( ip2config.irq[i]);
425 }
426 }
gregkh@suse.deca8eca62005-03-23 09:53:09 -0800[diff] [blame]427 class_destroy(ip2_class);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]428 devfs_remove("ip2");
429 if ( ( err = tty_unregister_driver ( ip2_tty_driver ) ) ) {
430 printk(KERN_ERR "IP2: failed to unregister tty driver (%d)\n", err);
431 }
432 put_tty_driver(ip2_tty_driver);
433 if ( ( err = unregister_chrdev ( IP2_IPL_MAJOR, pcIpl ) ) ) {
434 printk(KERN_ERR "IP2: failed to unregister IPL driver (%d)\n", err);
435 }
436 remove_proc_entry("ip2mem", &proc_root);
437
438 // free memory
439 for (i = 0; i < IP2_MAX_BOARDS; i++) {
440 void *pB;
441#ifdef CONFIG_PCI
442 if (ip2config.type[i] == PCI && ip2config.pci_dev[i]) {
443 pci_disable_device(ip2config.pci_dev[i]);
444 ip2config.pci_dev[i] = NULL;
445 }
446#endif
447 if ((pB = i2BoardPtrTable[i]) != 0 ) {
448 kfree ( pB );
449 i2BoardPtrTable[i] = NULL;
450 }
451 if ((DevTableMem[i]) != NULL ) {
452 kfree ( DevTableMem[i] );
453 DevTableMem[i] = NULL;
454 }
455 }
456
457 /* Cleanup the iiEllis subsystem. */
458 iiEllisCleanup();
459#ifdef IP2DEBUG_INIT
460 printk (KERN_DEBUG "IP2 Unloaded\n" );
461#endif
462}
463#endif /* MODULE */
464
465static struct tty_operations ip2_ops = {
466 .open = ip2_open,
467 .close = ip2_close,
468 .write = ip2_write,
469 .put_char = ip2_putchar,
470 .flush_chars = ip2_flush_chars,
471 .write_room = ip2_write_room,
472 .chars_in_buffer = ip2_chars_in_buf,
473 .flush_buffer = ip2_flush_buffer,
474 .ioctl = ip2_ioctl,
475 .throttle = ip2_throttle,
476 .unthrottle = ip2_unthrottle,
477 .set_termios = ip2_set_termios,
478 .set_ldisc = ip2_set_line_discipline,
479 .stop = ip2_stop,
480 .start = ip2_start,
481 .hangup = ip2_hangup,
482 .read_proc = ip2_read_proc,
483 .tiocmget = ip2_tiocmget,
484 .tiocmset = ip2_tiocmset,
485};
486
487/******************************************************************************/
488/* Function: ip2_loadmain() */
489/* Parameters: irq, io from command line of insmod et. al. */
490/* pointer to fip firmware and firmware size for boards */
491/* Returns: Success (0) */
492/* */
493/* Description: */
494/* This was the required entry point for all drivers (now in ip2.c) */
495/* It performs all */
496/* initialisation of the devices and driver structures, and registers itself */
497/* with the relevant kernel modules. */
498/******************************************************************************/
499/* SA_INTERRUPT- if set blocks all interrupts else only this line */
500/* SA_SHIRQ - for shared irq PCI or maybe EISA only */
501/* SA_RANDOM - can be source for cert. random number generators */
502#define IP2_SA_FLAGS 0
503
504int
505ip2_loadmain(int *iop, int *irqp, unsigned char *firmware, int firmsize)
506{
507 int i, j, box;
508 int err = 0;
509 int status = 0;
510 static int loaded;
511 i2eBordStrPtr pB = NULL;
512 int rc = -1;
513
514 ip2trace (ITRC_NO_PORT, ITRC_INIT, ITRC_ENTER, 0 );
515
516 /* process command line arguments to modprobe or
517 insmod i.e. iop & irqp */
518 /* irqp and iop should ALWAYS be specified now... But we check
519 them individually just to be sure, anyways... */
520 for ( i = 0; i < IP2_MAX_BOARDS; ++i ) {
521 if (iop) {
522 ip2config.addr[i] = iop[i];
523 if (irqp) {
524 if( irqp[i] >= 0 ) {
525 ip2config.irq[i] = irqp[i];
526 } else {
527 ip2config.irq[i] = 0;
528 }
529 // This is a little bit of a hack. If poll_only=1 on command
530 // line back in ip2.c OR all IRQs on all specified boards are
531 // explicitly set to 0, then drop to poll only mode and override
532 // PCI or EISA interrupts. This superceeds the old hack of
533 // triggering if all interrupts were zero (like da default).
534 // Still a hack but less prone to random acts of terrorism.
535 //
536 // What we really should do, now that the IRQ default is set
537 // to -1, is to use 0 as a hard coded, do not probe.
538 //
539 // /\/\|=mhw=|\/\/
540 poll_only |= irqp[i];
541 }
542 }
543 }
544 poll_only = !poll_only;
545
546 Fip_firmware = firmware;
547 Fip_firmware_size = firmsize;
548
549 /* Announce our presence */
550 printk( KERN_INFO "%s version %s\n", pcName, pcVersion );
551
552 // ip2 can be unloaded and reloaded for no good reason
553 // we can't let that happen here or bad things happen
554 // second load hoses board but not system - fixme later
555 if (loaded) {
556 printk( KERN_INFO "Still loaded\n" );
557 return 0;
558 }
559 loaded++;
560
561 ip2_tty_driver = alloc_tty_driver(IP2_MAX_PORTS);
562 if (!ip2_tty_driver)
563 return -ENOMEM;
564
565 /* Initialise the iiEllis subsystem. */
566 iiEllisInit();
567
568 /* Initialize arrays. */
569 memset( i2BoardPtrTable, 0, sizeof i2BoardPtrTable );
570 memset( DevTable, 0, sizeof DevTable );
571
572 /* Initialise all the boards we can find (up to the maximum). */
573 for ( i = 0; i < IP2_MAX_BOARDS; ++i ) {
574 switch ( ip2config.addr[i] ) {
575 case 0: /* skip this slot even if card is present */
576 break;
577 default: /* ISA */
578 /* ISA address must be specified */
579 if ( (ip2config.addr[i] < 0x100) || (ip2config.addr[i] > 0x3f8) ) {
580 printk ( KERN_ERR "IP2: Bad ISA board %d address %x\n",
581 i, ip2config.addr[i] );
582 ip2config.addr[i] = 0;
583 } else {
584 ip2config.type[i] = ISA;
585
586 /* Check for valid irq argument, set for polling if invalid */
587 if (ip2config.irq[i] && !is_valid_irq(ip2config.irq[i])) {
588 printk(KERN_ERR "IP2: Bad IRQ(%d) specified\n",ip2config.irq[i]);
589 ip2config.irq[i] = 0;// 0 is polling and is valid in that sense
590 }
591 }
592 break;
593 case PCI:
594#ifdef CONFIG_PCI
595 {
596 struct pci_dev *pci_dev_i = NULL;
597 pci_dev_i = pci_find_device(PCI_VENDOR_ID_COMPUTONE,
598 PCI_DEVICE_ID_COMPUTONE_IP2EX, pci_dev_i);
599 if (pci_dev_i != NULL) {
600 unsigned int addr;
601
602 if (pci_enable_device(pci_dev_i)) {
603 printk( KERN_ERR "IP2: can't enable PCI device at %s\n",
604 pci_name(pci_dev_i));
605 break;
606 }
607 ip2config.type[i] = PCI;
608 ip2config.pci_dev[i] = pci_dev_i;
609 status =
610 pci_read_config_dword(pci_dev_i, PCI_BASE_ADDRESS_1, &addr);
611 if ( addr & 1 ) {
612 ip2config.addr[i]=(USHORT)(addr&0xfffe);
613 } else {
614 printk( KERN_ERR "IP2: PCI I/O address error\n");
615 }
616
617// If the PCI BIOS assigned it, lets try and use it. If we
618// can't acquire it or it screws up, deal with it then.
619
620// if (!is_valid_irq(pci_irq)) {
621// printk( KERN_ERR "IP2: Bad PCI BIOS IRQ(%d)\n",pci_irq);
622// pci_irq = 0;
623// }
624 ip2config.irq[i] = pci_dev_i->irq;
625 } else { // ann error
626 ip2config.addr[i] = 0;
627 if (status == PCIBIOS_DEVICE_NOT_FOUND) {
628 printk( KERN_ERR "IP2: PCI board %d not found\n", i );
629 } else {
630 printk( KERN_ERR "IP2: PCI error 0x%x \n", status );
631 }
632 }
633 }
634#else
635 printk( KERN_ERR "IP2: PCI card specified but PCI support not\n");
636 printk( KERN_ERR "IP2: configured in this kernel.\n");
637 printk( KERN_ERR "IP2: Recompile kernel with CONFIG_PCI defined!\n");
638#endif /* CONFIG_PCI */
639 break;
640 case EISA:
641 if ( (ip2config.addr[i] = find_eisa_board( Eisa_slot + 1 )) != 0) {
642 /* Eisa_irq set as side effect, boo */
643 ip2config.type[i] = EISA;
644 }
645 ip2config.irq[i] = Eisa_irq;
646 break;
647 } /* switch */
648 } /* for */
649 for ( i = 0; i < IP2_MAX_BOARDS; ++i ) {
650 if ( ip2config.addr[i] ) {
651 pB = kmalloc( sizeof(i2eBordStr), GFP_KERNEL);
652 if ( pB != NULL ) {
653 i2BoardPtrTable[i] = pB;
654 memset( pB, 0, sizeof(i2eBordStr) );
655 iiSetAddress( pB, ip2config.addr[i], ii2DelayTimer );
656 iiReset( pB );
657 } else {
658 printk(KERN_ERR "IP2: board memory allocation error\n");
659 }
660 }
661 }
662 for ( i = 0; i < IP2_MAX_BOARDS; ++i ) {
663 if ( ( pB = i2BoardPtrTable[i] ) != NULL ) {
664 iiResetDelay( pB );
665 break;
666 }
667 }
668 for ( i = 0; i < IP2_MAX_BOARDS; ++i ) {
669 if ( i2BoardPtrTable[i] != NULL ) {
670 ip2_init_board( i );
671 }
672 }
673
674 ip2trace (ITRC_NO_PORT, ITRC_INIT, 2, 0 );
675
676 ip2_tty_driver->owner = THIS_MODULE;
677 ip2_tty_driver->name = "ttyF";
678 ip2_tty_driver->devfs_name = "tts/F";
679 ip2_tty_driver->driver_name = pcDriver_name;
680 ip2_tty_driver->major = IP2_TTY_MAJOR;
681 ip2_tty_driver->minor_start = 0;
682 ip2_tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
683 ip2_tty_driver->subtype = SERIAL_TYPE_NORMAL;
684 ip2_tty_driver->init_termios = tty_std_termios;
685 ip2_tty_driver->init_termios.c_cflag = B9600|CS8|CREAD|HUPCL|CLOCAL;
686 ip2_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_NO_DEVFS;
687 tty_set_operations(ip2_tty_driver, &ip2_ops);
688
689 ip2trace (ITRC_NO_PORT, ITRC_INIT, 3, 0 );
690
691 /* Register the tty devices. */
692 if ( ( err = tty_register_driver ( ip2_tty_driver ) ) ) {
693 printk(KERN_ERR "IP2: failed to register tty driver (%d)\n", err);
694 put_tty_driver(ip2_tty_driver);
695 return -EINVAL;
696 } else
697 /* Register the IPL driver. */
698 if ( ( err = register_chrdev ( IP2_IPL_MAJOR, pcIpl, &ip2_ipl ) ) ) {
699 printk(KERN_ERR "IP2: failed to register IPL device (%d)\n", err );
700 } else {
701 /* create the sysfs class */
gregkh@suse.deca8eca62005-03-23 09:53:09 -0800[diff] [blame]702 ip2_class = class_create(THIS_MODULE, "ip2");
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]703 if (IS_ERR(ip2_class)) {
704 err = PTR_ERR(ip2_class);
705 goto out_chrdev;
706 }
707 }
708 /* Register the read_procmem thing */
709 if (!create_proc_info_entry("ip2mem",0,&proc_root,ip2_read_procmem)) {
710 printk(KERN_ERR "IP2: failed to register read_procmem\n");
711 } else {
712
713 ip2trace (ITRC_NO_PORT, ITRC_INIT, 4, 0 );
714 /* Register the interrupt handler or poll handler, depending upon the
715 * specified interrupt.
716 */
717
718 for( i = 0; i < IP2_MAX_BOARDS; ++i ) {
719 if ( 0 == ip2config.addr[i] ) {
720 continue;
721 }
722
723 if ( NULL != ( pB = i2BoardPtrTable[i] ) ) {
gregkh@suse.deca8eca62005-03-23 09:53:09 -0800[diff] [blame]724 class_device_create(ip2_class, MKDEV(IP2_IPL_MAJOR,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]725 4 * i), NULL, "ipl%d", i);
726 err = devfs_mk_cdev(MKDEV(IP2_IPL_MAJOR, 4 * i),
727 S_IRUSR | S_IWUSR | S_IRGRP | S_IFCHR,
728 "ip2/ipl%d", i);
729 if (err) {
gregkh@suse.deca8eca62005-03-23 09:53:09 -0800[diff] [blame]730 class_device_destroy(ip2_class,
731 MKDEV(IP2_IPL_MAJOR, 4 * i));
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]732 goto out_class;
733 }
734
gregkh@suse.deca8eca62005-03-23 09:53:09 -0800[diff] [blame]735 class_device_create(ip2_class, MKDEV(IP2_IPL_MAJOR,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]736 4 * i + 1), NULL, "stat%d", i);
737 err = devfs_mk_cdev(MKDEV(IP2_IPL_MAJOR, 4 * i + 1),
738 S_IRUSR | S_IWUSR | S_IRGRP | S_IFCHR,
739 "ip2/stat%d", i);
740 if (err) {
gregkh@suse.deca8eca62005-03-23 09:53:09 -0800[diff] [blame]741 class_device_destroy(ip2_class,
742 MKDEV(IP2_IPL_MAJOR, 4 * i + 1));
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]743 goto out_class;
744 }
745
746 for ( box = 0; box < ABS_MAX_BOXES; ++box )
747 {
748 for ( j = 0; j < ABS_BIGGEST_BOX; ++j )
749 {
750 if ( pB->i2eChannelMap[box] & (1 << j) )
751 {
752 tty_register_device(ip2_tty_driver,
753 j + ABS_BIGGEST_BOX *
754 (box+i*ABS_MAX_BOXES), NULL);
755 }
756 }
757 }
758 }
759
760 if (poll_only) {
761// Poll only forces driver to only use polling and
762// to ignore the probed PCI or EISA interrupts.
763 ip2config.irq[i] = CIR_POLL;
764 }
765 if ( ip2config.irq[i] == CIR_POLL ) {
766retry:
767 if (!TimerOn) {
768 PollTimer.expires = POLL_TIMEOUT;
769 add_timer ( &PollTimer );
770 TimerOn = 1;
771 printk( KERN_INFO "IP2: polling\n");
772 }
773 } else {
774 if (have_requested_irq(ip2config.irq[i]))
775 continue;
776 rc = request_irq( ip2config.irq[i], ip2_interrupt,
777 IP2_SA_FLAGS | (ip2config.type[i] == PCI ? SA_SHIRQ : 0),
778 pcName, (void *)&pcName);
779 if (rc) {
780 printk(KERN_ERR "IP2: an request_irq failed: error %d\n",rc);
781 ip2config.irq[i] = CIR_POLL;
782 printk( KERN_INFO "IP2: Polling %ld/sec.\n",
783 (POLL_TIMEOUT - jiffies));
784 goto retry;
785 }
786 mark_requested_irq(ip2config.irq[i]);
787 /* Initialise the interrupt handler bottom half (aka slih). */
788 }
789 }
790 for( i = 0; i < IP2_MAX_BOARDS; ++i ) {
791 if ( i2BoardPtrTable[i] ) {
792 set_irq( i, ip2config.irq[i] ); /* set and enable board interrupt */
793 }
794 }
795 }
796 ip2trace (ITRC_NO_PORT, ITRC_INIT, ITRC_RETURN, 0 );
797 goto out;
798
799out_class:
gregkh@suse.deca8eca62005-03-23 09:53:09 -0800[diff] [blame]800 class_destroy(ip2_class);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]801out_chrdev:
802 unregister_chrdev(IP2_IPL_MAJOR, "ip2");
803out:
804 return err;
805}
806
807EXPORT_SYMBOL(ip2_loadmain);
808
809/******************************************************************************/
810/* Function: ip2_init_board() */
811/* Parameters: Index of board in configuration structure */
812/* Returns: Success (0) */
813/* */
814/* Description: */
815/* This function initializes the specified board. The loadware is copied to */
816/* the board, the channel structures are initialized, and the board details */
817/* are reported on the console. */
818/******************************************************************************/
819static void __init
820ip2_init_board( int boardnum )
821{
822 int i;
823 int nports = 0, nboxes = 0;
824 i2ChanStrPtr pCh;
825 i2eBordStrPtr pB = i2BoardPtrTable[boardnum];
826
827 if ( !iiInitialize ( pB ) ) {
828 printk ( KERN_ERR "IP2: Failed to initialize board at 0x%x, error %d\n",
829 pB->i2eBase, pB->i2eError );
830 goto err_initialize;
831 }
832 printk(KERN_INFO "IP2: Board %d: addr=0x%x irq=%d\n", boardnum + 1,
833 ip2config.addr[boardnum], ip2config.irq[boardnum] );
834
835 if (!request_region( ip2config.addr[boardnum], 8, pcName )) {
836 printk(KERN_ERR "IP2: bad addr=0x%x\n", ip2config.addr[boardnum]);
837 goto err_initialize;
838 }
839
840 if ( iiDownloadAll ( pB, (loadHdrStrPtr)Fip_firmware, 1, Fip_firmware_size )
841 != II_DOWN_GOOD ) {
842 printk ( KERN_ERR "IP2: failed to download loadware\n" );
843 goto err_release_region;
844 } else {
845 printk ( KERN_INFO "IP2: fv=%d.%d.%d lv=%d.%d.%d\n",
846 pB->i2ePom.e.porVersion,
847 pB->i2ePom.e.porRevision,
848 pB->i2ePom.e.porSubRev, pB->i2eLVersion,
849 pB->i2eLRevision, pB->i2eLSub );
850 }
851
852 switch ( pB->i2ePom.e.porID & ~POR_ID_RESERVED ) {
853
854 default:
855 printk( KERN_ERR "IP2: Unknown board type, ID = %x\n",
856 pB->i2ePom.e.porID );
857 nports = 0;
858 goto err_release_region;
859 break;
860
861 case POR_ID_II_4: /* IntelliPort-II, ISA-4 (4xRJ45) */
862 printk ( KERN_INFO "IP2: ISA-4\n" );
863 nports = 4;
864 break;
865
866 case POR_ID_II_8: /* IntelliPort-II, 8-port using standard brick. */
867 printk ( KERN_INFO "IP2: ISA-8 std\n" );
868 nports = 8;
869 break;
870
871 case POR_ID_II_8R: /* IntelliPort-II, 8-port using RJ11's (no CTS) */
872 printk ( KERN_INFO "IP2: ISA-8 RJ11\n" );
873 nports = 8;
874 break;
875
876 case POR_ID_FIIEX: /* IntelliPort IIEX */
877 {
878 int portnum = IP2_PORTS_PER_BOARD * boardnum;
879 int box;
880
881 for( box = 0; box < ABS_MAX_BOXES; ++box ) {
882 if ( pB->i2eChannelMap[box] != 0 ) {
883 ++nboxes;
884 }
885 for( i = 0; i < ABS_BIGGEST_BOX; ++i ) {
886 if ( pB->i2eChannelMap[box] & 1<< i ) {
887 ++nports;
888 }
889 }
890 }
891 DevTableMem[boardnum] = pCh =
892 kmalloc( sizeof(i2ChanStr) * nports, GFP_KERNEL );
893 if ( !pCh ) {
894 printk ( KERN_ERR "IP2: (i2_init_channel:) Out of memory.\n");
895 goto err_release_region;
896 }
897 if ( !i2InitChannels( pB, nports, pCh ) ) {
898 printk(KERN_ERR "IP2: i2InitChannels failed: %d\n",pB->i2eError);
899 kfree ( pCh );
900 goto err_release_region;
901 }
902 pB->i2eChannelPtr = &DevTable[portnum];
903 pB->i2eChannelCnt = ABS_MOST_PORTS;
904
905 for( box = 0; box < ABS_MAX_BOXES; ++box, portnum += ABS_BIGGEST_BOX ) {
906 for( i = 0; i < ABS_BIGGEST_BOX; ++i ) {
907 if ( pB->i2eChannelMap[box] & (1 << i) ) {
908 DevTable[portnum + i] = pCh;
909 pCh->port_index = portnum + i;
910 pCh++;
911 }
912 }
913 }
914 printk(KERN_INFO "IP2: EX box=%d ports=%d %d bit\n",
915 nboxes, nports, pB->i2eDataWidth16 ? 16 : 8 );
916 }
917 goto ex_exit;
918 }
919 DevTableMem[boardnum] = pCh =
920 kmalloc ( sizeof (i2ChanStr) * nports, GFP_KERNEL );
921 if ( !pCh ) {
922 printk ( KERN_ERR "IP2: (i2_init_channel:) Out of memory.\n");
923 goto err_release_region;
924 }
925 pB->i2eChannelPtr = pCh;
926 pB->i2eChannelCnt = nports;
927 if ( !i2InitChannels( pB, nports, pCh ) ) {
928 printk(KERN_ERR "IP2: i2InitChannels failed: %d\n",pB->i2eError);
929 kfree ( pCh );
930 goto err_release_region;
931 }
932 pB->i2eChannelPtr = &DevTable[IP2_PORTS_PER_BOARD * boardnum];
933
934 for( i = 0; i < pB->i2eChannelCnt; ++i ) {
935 DevTable[IP2_PORTS_PER_BOARD * boardnum + i] = pCh;
936 pCh->port_index = (IP2_PORTS_PER_BOARD * boardnum) + i;
937 pCh++;
938 }
939ex_exit:
940 INIT_WORK(&pB->tqueue_interrupt, (void(*)(void*)) ip2_interrupt_bh, pB);
941 return;
942
943err_release_region:
944 release_region(ip2config.addr[boardnum], 8);
945err_initialize:
946 kfree ( pB );
947 i2BoardPtrTable[boardnum] = NULL;
948 return;
949}
950
951/******************************************************************************/
952/* Function: find_eisa_board ( int start_slot ) */
953/* Parameters: First slot to check */
954/* Returns: Address of EISA IntelliPort II controller */
955/* */
956/* Description: */
957/* This function searches for an EISA IntelliPort controller, starting */
958/* from the specified slot number. If the motherboard is not identified as an */
959/* EISA motherboard, or no valid board ID is selected it returns 0. Otherwise */
960/* it returns the base address of the controller. */
961/******************************************************************************/
962static unsigned short __init
963find_eisa_board( int start_slot )
964{
965 int i, j;
966 unsigned int idm = 0;
967 unsigned int idp = 0;
968 unsigned int base = 0;
969 unsigned int value;
970 int setup_address;
971 int setup_irq;
972 int ismine = 0;
973
974 /*
975 * First a check for an EISA motherboard, which we do by comparing the
976 * EISA ID registers for the system board and the first couple of slots.
977 * No slot ID should match the system board ID, but on an ISA or PCI
978 * machine the odds are that an empty bus will return similar values for
979 * each slot.
980 */
981 i = 0x0c80;
982 value = (inb(i) << 24) + (inb(i+1) << 16) + (inb(i+2) << 8) + inb(i+3);
983 for( i = 0x1c80; i <= 0x4c80; i += 0x1000 ) {
984 j = (inb(i)<<24)+(inb(i+1)<<16)+(inb(i+2)<<8)+inb(i+3);
985 if ( value == j )
986 return 0;
987 }
988
989 /*
990 * OK, so we are inclined to believe that this is an EISA machine. Find
991 * an IntelliPort controller.
992 */
993 for( i = start_slot; i < 16; i++ ) {
994 base = i << 12;
995 idm = (inb(base + 0xc80) << 8) | (inb(base + 0xc81) & 0xff);
996 idp = (inb(base + 0xc82) << 8) | (inb(base + 0xc83) & 0xff);
997 ismine = 0;
998 if ( idm == 0x0e8e ) {
999 if ( idp == 0x0281 || idp == 0x0218 ) {
1000 ismine = 1;
1001 } else if ( idp == 0x0282 || idp == 0x0283 ) {
1002 ismine = 3; /* Can do edge-trigger */
1003 }
1004 if ( ismine ) {
1005 Eisa_slot = i;
1006 break;
1007 }
1008 }
1009 }
1010 if ( !ismine )
1011 return 0;
1012
1013 /* It's some sort of EISA card, but at what address is it configured? */
1014
1015 setup_address = base + 0xc88;
1016 value = inb(base + 0xc86);
1017 setup_irq = (value & 8) ? Valid_Irqs[value & 7] : 0;
1018
1019 if ( (ismine & 2) && !(value & 0x10) ) {
1020 ismine = 1; /* Could be edging, but not */
1021 }
1022
1023 if ( Eisa_irq == 0 ) {
1024 Eisa_irq = setup_irq;
1025 } else if ( Eisa_irq != setup_irq ) {
1026 printk ( KERN_ERR "IP2: EISA irq mismatch between EISA controllers\n" );
1027 }
1028
1029#ifdef IP2DEBUG_INIT
1030printk(KERN_DEBUG "Computone EISA board in slot %d, I.D. 0x%x%x, Address 0x%x",
1031 base >> 12, idm, idp, setup_address);
1032 if ( Eisa_irq ) {
1033 printk(KERN_DEBUG ", Interrupt %d %s\n",
1034 setup_irq, (ismine & 2) ? "(edge)" : "(level)");
1035 } else {
1036 printk(KERN_DEBUG ", (polled)\n");
1037 }
1038#endif
1039 return setup_address;
1040}
1041
1042/******************************************************************************/
1043/* Function: set_irq() */
1044/* Parameters: index to board in board table */
1045/* IRQ to use */
1046/* Returns: Success (0) */
1047/* */
1048/* Description: */
1049/******************************************************************************/
1050static void
1051set_irq( int boardnum, int boardIrq )
1052{
1053 unsigned char tempCommand[16];
1054 i2eBordStrPtr pB = i2BoardPtrTable[boardnum];
1055 unsigned long flags;
1056
1057 /*
1058 * Notify the boards they may generate interrupts. This is done by
1059 * sending an in-line command to channel 0 on each board. This is why
1060 * the channels have to be defined already. For each board, if the
1061 * interrupt has never been defined, we must do so NOW, directly, since
1062 * board will not send flow control or even give an interrupt until this
1063 * is done. If polling we must send 0 as the interrupt parameter.
1064 */
1065
1066 // We will get an interrupt here at the end of this function
1067
1068 iiDisableMailIrq(pB);
1069
1070 /* We build up the entire packet header. */
1071 CHANNEL_OF(tempCommand) = 0;
1072 PTYPE_OF(tempCommand) = PTYPE_INLINE;
1073 CMD_COUNT_OF(tempCommand) = 2;
1074 (CMD_OF(tempCommand))[0] = CMDVALUE_IRQ;
1075 (CMD_OF(tempCommand))[1] = boardIrq;
1076 /*
1077 * Write to FIFO; don't bother to adjust fifo capacity for this, since
1078 * board will respond almost immediately after SendMail hit.
1079 */
1080 WRITE_LOCK_IRQSAVE(&pB->write_fifo_spinlock,flags);
1081 iiWriteBuf(pB, tempCommand, 4);
1082 WRITE_UNLOCK_IRQRESTORE(&pB->write_fifo_spinlock,flags);
1083 pB->i2eUsingIrq = boardIrq;
1084 pB->i2eOutMailWaiting |= MB_OUT_STUFFED;
1085
1086 /* Need to update number of boards before you enable mailbox int */
1087 ++i2nBoards;
1088
1089 CHANNEL_OF(tempCommand) = 0;
1090 PTYPE_OF(tempCommand) = PTYPE_BYPASS;
1091 CMD_COUNT_OF(tempCommand) = 6;
1092 (CMD_OF(tempCommand))[0] = 88; // SILO
1093 (CMD_OF(tempCommand))[1] = 64; // chars
1094 (CMD_OF(tempCommand))[2] = 32; // ms
1095
1096 (CMD_OF(tempCommand))[3] = 28; // MAX_BLOCK
1097 (CMD_OF(tempCommand))[4] = 64; // chars
1098
1099 (CMD_OF(tempCommand))[5] = 87; // HW_TEST
1100 WRITE_LOCK_IRQSAVE(&pB->write_fifo_spinlock,flags);
1101 iiWriteBuf(pB, tempCommand, 8);
1102 WRITE_UNLOCK_IRQRESTORE(&pB->write_fifo_spinlock,flags);
1103
1104 CHANNEL_OF(tempCommand) = 0;
1105 PTYPE_OF(tempCommand) = PTYPE_BYPASS;
1106 CMD_COUNT_OF(tempCommand) = 1;
1107 (CMD_OF(tempCommand))[0] = 84; /* get BOX_IDS */
1108 iiWriteBuf(pB, tempCommand, 3);
1109
1110#ifdef XXX
1111 // enable heartbeat for test porpoises
1112 CHANNEL_OF(tempCommand) = 0;
1113 PTYPE_OF(tempCommand) = PTYPE_BYPASS;
1114 CMD_COUNT_OF(tempCommand) = 2;
1115 (CMD_OF(tempCommand))[0] = 44; /* get ping */
1116 (CMD_OF(tempCommand))[1] = 200; /* 200 ms */
1117 WRITE_LOCK_IRQSAVE(&pB->write_fifo_spinlock,flags);
1118 iiWriteBuf(pB, tempCommand, 4);
1119 WRITE_UNLOCK_IRQRESTORE(&pB->write_fifo_spinlock,flags);
1120#endif
1121
1122 iiEnableMailIrq(pB);
1123 iiSendPendingMail(pB);
1124}
1125
1126/******************************************************************************/
1127/* Interrupt Handler Section */
1128/******************************************************************************/
1129
1130static inline void
1131service_all_boards(void)
1132{
1133 int i;
1134 i2eBordStrPtr pB;
1135
1136 /* Service every board on the list */
1137 for( i = 0; i < IP2_MAX_BOARDS; ++i ) {
1138 pB = i2BoardPtrTable[i];
1139 if ( pB ) {
1140 i2ServiceBoard( pB );
1141 }
1142 }
1143}
1144
1145
1146/******************************************************************************/
1147/* Function: ip2_interrupt_bh(pB) */
1148/* Parameters: pB - pointer to the board structure */
1149/* Returns: Nothing */
1150/* */
1151/* Description: */
1152/* Service the board in a bottom half interrupt handler and then */
1153/* reenable the board's interrupts if it has an IRQ number */
1154/* */
1155/******************************************************************************/
1156static void
1157ip2_interrupt_bh(i2eBordStrPtr pB)
1158{
1159// pB better well be set or we have a problem! We can only get
1160// here from the IMMEDIATE queue. Here, we process the boards.
1161// Checking pB doesn't cost much and it saves us from the sanity checkers.
1162
1163 bh_counter++;
1164
1165 if ( pB ) {
1166 i2ServiceBoard( pB );
1167 if( pB->i2eUsingIrq ) {
1168// Re-enable his interrupts
1169 iiEnableMailIrq(pB);
1170 }
1171 }
1172}
1173
1174
1175/******************************************************************************/
1176/* Function: ip2_interrupt(int irq, void *dev_id, struct pt_regs * regs) */
1177/* Parameters: irq - interrupt number */
1178/* pointer to optional device ID structure */
1179/* pointer to register structure */
1180/* Returns: Nothing */
1181/* */
1182/* Description: */
1183/* */
1184/* Our task here is simply to identify each board which needs servicing. */
1185/* If we are queuing then, queue it to be serviced, and disable its irq */
1186/* mask otherwise process the board directly. */
1187/* */
1188/* We could queue by IRQ but that just complicates things on both ends */
1189/* with very little gain in performance (how many instructions does */
1190/* it take to iterate on the immediate queue). */
1191/* */
1192/* */
1193/******************************************************************************/
1194static irqreturn_t
1195ip2_interrupt(int irq, void *dev_id, struct pt_regs * regs)
1196{
1197 int i;
1198 i2eBordStrPtr pB;
1199 int handled = 0;
1200
1201 ip2trace (ITRC_NO_PORT, ITRC_INTR, 99, 1, irq );
1202
1203 /* Service just the boards on the list using this irq */
1204 for( i = 0; i < i2nBoards; ++i ) {
1205 pB = i2BoardPtrTable[i];
1206
1207// Only process those boards which match our IRQ.
1208// IRQ = 0 for polled boards, we won't poll "IRQ" boards
1209
1210 if ( pB && (pB->i2eUsingIrq == irq) ) {
1211 handled = 1;
1212#ifdef USE_IQI
1213
1214 if (NO_MAIL_HERE != ( pB->i2eStartMail = iiGetMail(pB))) {
1215// Disable his interrupt (will be enabled when serviced)
1216// This is mostly to protect from reentrancy.
1217 iiDisableMailIrq(pB);
1218
1219// Park the board on the immediate queue for processing.
1220 schedule_work(&pB->tqueue_interrupt);
1221
1222// Make sure the immediate queue is flagged to fire.
1223 }
1224#else
1225// We are using immediate servicing here. This sucks and can
1226// cause all sorts of havoc with ppp and others. The failsafe
1227// check on iiSendPendingMail could also throw a hairball.
1228 i2ServiceBoard( pB );
1229#endif /* USE_IQI */
1230 }
1231 }
1232
1233 ++irq_counter;
1234
1235 ip2trace (ITRC_NO_PORT, ITRC_INTR, ITRC_RETURN, 0 );
1236 return IRQ_RETVAL(handled);
1237}
1238
1239/******************************************************************************/
1240/* Function: ip2_poll(unsigned long arg) */
1241/* Parameters: ? */
1242/* Returns: Nothing */
1243/* */
1244/* Description: */
1245/* This function calls the library routine i2ServiceBoard for each board in */
1246/* the board table. This is used instead of the interrupt routine when polled */
1247/* mode is specified. */
1248/******************************************************************************/
1249static void
1250ip2_poll(unsigned long arg)
1251{
1252 ip2trace (ITRC_NO_PORT, ITRC_INTR, 100, 0 );
1253
1254 TimerOn = 0; // it's the truth but not checked in service
1255
1256 // Just polled boards, IRQ = 0 will hit all non-interrupt boards.
1257 // It will NOT poll boards handled by hard interrupts.
1258 // The issue of queued BH interrups is handled in ip2_interrupt().
1259 ip2_interrupt(0, NULL, NULL);
1260
1261 PollTimer.expires = POLL_TIMEOUT;
1262 add_timer( &PollTimer );
1263 TimerOn = 1;
1264
1265 ip2trace (ITRC_NO_PORT, ITRC_INTR, ITRC_RETURN, 0 );
1266}
1267
1268static void do_input(void *p)
1269{
1270 i2ChanStrPtr pCh = p;
1271 unsigned long flags;
1272
1273 ip2trace(CHANN, ITRC_INPUT, 21, 0 );
1274
1275 // Data input
1276 if ( pCh->pTTY != NULL ) {
1277 READ_LOCK_IRQSAVE(&pCh->Ibuf_spinlock,flags)
1278 if (!pCh->throttled && (pCh->Ibuf_stuff != pCh->Ibuf_strip)) {
1279 READ_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,flags)
1280 i2Input( pCh );
1281 } else
1282 READ_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,flags)
1283 } else {
1284 ip2trace(CHANN, ITRC_INPUT, 22, 0 );
1285
1286 i2InputFlush( pCh );
1287 }
1288}
1289
1290// code duplicated from n_tty (ldisc)
1291static inline void isig(int sig, struct tty_struct *tty, int flush)
1292{
1293 if (tty->pgrp > 0)
1294 kill_pg(tty->pgrp, sig, 1);
1295 if (flush || !L_NOFLSH(tty)) {
1296 if ( tty->ldisc.flush_buffer )
1297 tty->ldisc.flush_buffer(tty);
1298 i2InputFlush( tty->driver_data );
1299 }
1300}
1301
1302static void do_status(void *p)
1303{
1304 i2ChanStrPtr pCh = p;
1305 int status;
1306
1307 status = i2GetStatus( pCh, (I2_BRK|I2_PAR|I2_FRA|I2_OVR) );
1308
1309 ip2trace (CHANN, ITRC_STATUS, 21, 1, status );
1310
1311 if (pCh->pTTY && (status & (I2_BRK|I2_PAR|I2_FRA|I2_OVR)) ) {
1312 if ( (status & I2_BRK) ) {
1313 // code duplicated from n_tty (ldisc)
1314 if (I_IGNBRK(pCh->pTTY))
1315 goto skip_this;
1316 if (I_BRKINT(pCh->pTTY)) {
1317 isig(SIGINT, pCh->pTTY, 1);
1318 goto skip_this;
1319 }
1320 wake_up_interruptible(&pCh->pTTY->read_wait);
1321 }
1322#ifdef NEVER_HAPPENS_AS_SETUP_XXX
1323 // and can't work because we don't know the_char
1324 // as the_char is reported on a separate path
1325 // The intelligent board does this stuff as setup
1326 {
1327 char brkf = TTY_NORMAL;
1328 unsigned char brkc = '\0';
1329 unsigned char tmp;
1330 if ( (status & I2_BRK) ) {
1331 brkf = TTY_BREAK;
1332 brkc = '\0';
1333 }
1334 else if (status & I2_PAR) {
1335 brkf = TTY_PARITY;
1336 brkc = the_char;
1337 } else if (status & I2_FRA) {
1338 brkf = TTY_FRAME;
1339 brkc = the_char;
1340 } else if (status & I2_OVR) {
1341 brkf = TTY_OVERRUN;
1342 brkc = the_char;
1343 }
1344 tmp = pCh->pTTY->real_raw;
1345 pCh->pTTY->real_raw = 0;
1346 pCh->pTTY->ldisc.receive_buf( pCh->pTTY, &brkc, &brkf, 1 );
1347 pCh->pTTY->real_raw = tmp;
1348 }
1349#endif /* NEVER_HAPPENS_AS_SETUP_XXX */
1350 }
1351skip_this:
1352
1353 if ( status & (I2_DDCD | I2_DDSR | I2_DCTS | I2_DRI) ) {
1354 wake_up_interruptible(&pCh->delta_msr_wait);
1355
1356 if ( (pCh->flags & ASYNC_CHECK_CD) && (status & I2_DDCD) ) {
1357 if ( status & I2_DCD ) {
1358 if ( pCh->wopen ) {
1359 wake_up_interruptible ( &pCh->open_wait );
1360 }
1361 } else {
1362 if (pCh->pTTY && (!(pCh->pTTY->termios->c_cflag & CLOCAL)) ) {
1363 tty_hangup( pCh->pTTY );
1364 }
1365 }
1366 }
1367 }
1368
1369 ip2trace (CHANN, ITRC_STATUS, 26, 0 );
1370}
1371
1372/******************************************************************************/
1373/* Device Open/Close/Ioctl Entry Point Section */
1374/******************************************************************************/
1375
1376/******************************************************************************/
1377/* Function: open_sanity_check() */
1378/* Parameters: Pointer to tty structure */
1379/* Pointer to file structure */
1380/* Returns: Success or failure */
1381/* */
1382/* Description: */
1383/* Verifies the structure magic numbers and cross links. */
1384/******************************************************************************/
1385#ifdef IP2DEBUG_OPEN
1386static void
1387open_sanity_check( i2ChanStrPtr pCh, i2eBordStrPtr pBrd )
1388{
1389 if ( pBrd->i2eValid != I2E_MAGIC ) {
1390 printk(KERN_ERR "IP2: invalid board structure\n" );
1391 } else if ( pBrd != pCh->pMyBord ) {
1392 printk(KERN_ERR "IP2: board structure pointer mismatch (%p)\n",
1393 pCh->pMyBord );
1394 } else if ( pBrd->i2eChannelCnt < pCh->port_index ) {
1395 printk(KERN_ERR "IP2: bad device index (%d)\n", pCh->port_index );
1396 } else if (&((i2ChanStrPtr)pBrd->i2eChannelPtr)[pCh->port_index] != pCh) {
1397 } else {
1398 printk(KERN_INFO "IP2: all pointers check out!\n" );
1399 }
1400}
1401#endif
1402
1403
1404/******************************************************************************/
1405/* Function: ip2_open() */
1406/* Parameters: Pointer to tty structure */
1407/* Pointer to file structure */
1408/* Returns: Success or failure */
1409/* */
1410/* Description: (MANDATORY) */
1411/* A successful device open has to run a gauntlet of checks before it */
1412/* completes. After some sanity checking and pointer setup, the function */
1413/* blocks until all conditions are satisfied. It then initialises the port to */
1414/* the default characteristics and returns. */
1415/******************************************************************************/
1416static int
1417ip2_open( PTTY tty, struct file *pFile )
1418{
1419 wait_queue_t wait;
1420 int rc = 0;
1421 int do_clocal = 0;
1422 i2ChanStrPtr pCh = DevTable[tty->index];
1423
1424 ip2trace (tty->index, ITRC_OPEN, ITRC_ENTER, 0 );
1425
1426 if ( pCh == NULL ) {
1427 return -ENODEV;
1428 }
1429 /* Setup pointer links in device and tty structures */
1430 pCh->pTTY = tty;
1431 tty->driver_data = pCh;
1432
1433#ifdef IP2DEBUG_OPEN
1434 printk(KERN_DEBUG \
1435 "IP2:open(tty=%p,pFile=%p):dev=%s,ch=%d,idx=%d\n",
1436 tty, pFile, tty->name, pCh->infl.hd.i2sChannel, pCh->port_index);
1437 open_sanity_check ( pCh, pCh->pMyBord );
1438#endif
1439
1440 i2QueueCommands(PTYPE_INLINE, pCh, 100, 3, CMD_DTRUP,CMD_RTSUP,CMD_DCD_REP);
1441 pCh->dataSetOut |= (I2_DTR | I2_RTS);
1442 serviceOutgoingFifo( pCh->pMyBord );
1443
1444 /* Block here until the port is ready (per serial and istallion) */
1445 /*
1446 * 1. If the port is in the middle of closing wait for the completion
1447 * and then return the appropriate error.
1448 */
1449 init_waitqueue_entry(&wait, current);
1450 add_wait_queue(&pCh->close_wait, &wait);
1451 set_current_state( TASK_INTERRUPTIBLE );
1452
1453 if ( tty_hung_up_p(pFile) || ( pCh->flags & ASYNC_CLOSING )) {
1454 if ( pCh->flags & ASYNC_CLOSING ) {
1455 schedule();
1456 }
1457 if ( tty_hung_up_p(pFile) ) {
1458 set_current_state( TASK_RUNNING );
1459 remove_wait_queue(&pCh->close_wait, &wait);
1460 return( pCh->flags & ASYNC_HUP_NOTIFY ) ? -EAGAIN : -ERESTARTSYS;
1461 }
1462 }
1463 set_current_state( TASK_RUNNING );
1464 remove_wait_queue(&pCh->close_wait, &wait);
1465
1466 /*
1467 * 3. Handle a non-blocking open of a normal port.
1468 */
1469 if ( (pFile->f_flags & O_NONBLOCK) || (tty->flags & (1<<TTY_IO_ERROR) )) {
1470 pCh->flags |= ASYNC_NORMAL_ACTIVE;
1471 goto noblock;
1472 }
1473 /*
1474 * 4. Now loop waiting for the port to be free and carrier present
1475 * (if required).
1476 */
1477 if ( tty->termios->c_cflag & CLOCAL )
1478 do_clocal = 1;
1479
1480#ifdef IP2DEBUG_OPEN
1481 printk(KERN_DEBUG "OpenBlock: do_clocal = %d\n", do_clocal);
1482#endif
1483
1484 ++pCh->wopen;
1485
1486 init_waitqueue_entry(&wait, current);
1487 add_wait_queue(&pCh->open_wait, &wait);
1488
1489 for(;;) {
1490 i2QueueCommands(PTYPE_INLINE, pCh, 100, 2, CMD_DTRUP, CMD_RTSUP);
1491 pCh->dataSetOut |= (I2_DTR | I2_RTS);
1492 set_current_state( TASK_INTERRUPTIBLE );
1493 serviceOutgoingFifo( pCh->pMyBord );
1494 if ( tty_hung_up_p(pFile) ) {
1495 set_current_state( TASK_RUNNING );
1496 remove_wait_queue(&pCh->open_wait, &wait);
1497 return ( pCh->flags & ASYNC_HUP_NOTIFY ) ? -EBUSY : -ERESTARTSYS;
1498 }
1499 if (!(pCh->flags & ASYNC_CLOSING) &&
1500 (do_clocal || (pCh->dataSetIn & I2_DCD) )) {
1501 rc = 0;
1502 break;
1503 }
1504
1505#ifdef IP2DEBUG_OPEN
1506 printk(KERN_DEBUG "ASYNC_CLOSING = %s\n",
1507 (pCh->flags & ASYNC_CLOSING)?"True":"False");
1508 printk(KERN_DEBUG "OpenBlock: waiting for CD or signal\n");
1509#endif
1510 ip2trace (CHANN, ITRC_OPEN, 3, 2, 0,
1511 (pCh->flags & ASYNC_CLOSING) );
1512 /* check for signal */
1513 if (signal_pending(current)) {
1514 rc = (( pCh->flags & ASYNC_HUP_NOTIFY ) ? -EAGAIN : -ERESTARTSYS);
1515 break;
1516 }
1517 schedule();
1518 }
1519 set_current_state( TASK_RUNNING );
1520 remove_wait_queue(&pCh->open_wait, &wait);
1521
1522 --pCh->wopen; //why count?
1523
1524 ip2trace (CHANN, ITRC_OPEN, 4, 0 );
1525
1526 if (rc != 0 ) {
1527 return rc;
1528 }
1529 pCh->flags |= ASYNC_NORMAL_ACTIVE;
1530
1531noblock:
1532
1533 /* first open - Assign termios structure to port */
1534 if ( tty->count == 1 ) {
1535 i2QueueCommands(PTYPE_INLINE, pCh, 0, 2, CMD_CTSFL_DSAB, CMD_RTSFL_DSAB);
1536 /* Now we must send the termios settings to the loadware */
1537 set_params( pCh, NULL );
1538 }
1539
1540 /*
1541 * Now set any i2lib options. These may go away if the i2lib code ends
1542 * up rolled into the mainline.
1543 */
1544 pCh->channelOptions |= CO_NBLOCK_WRITE;
1545
1546#ifdef IP2DEBUG_OPEN
1547 printk (KERN_DEBUG "IP2: open completed\n" );
1548#endif
1549 serviceOutgoingFifo( pCh->pMyBord );
1550
1551 ip2trace (CHANN, ITRC_OPEN, ITRC_RETURN, 0 );
1552
1553 return 0;
1554}
1555
1556/******************************************************************************/
1557/* Function: ip2_close() */
1558/* Parameters: Pointer to tty structure */
1559/* Pointer to file structure */
1560/* Returns: Nothing */
1561/* */
1562/* Description: */
1563/* */
1564/* */
1565/******************************************************************************/
1566static void
1567ip2_close( PTTY tty, struct file *pFile )
1568{
1569 i2ChanStrPtr pCh = tty->driver_data;
1570
1571 if ( !pCh ) {
1572 return;
1573 }
1574
1575 ip2trace (CHANN, ITRC_CLOSE, ITRC_ENTER, 0 );
1576
1577#ifdef IP2DEBUG_OPEN
1578 printk(KERN_DEBUG "IP2:close %s:\n",tty->name);
1579#endif
1580
1581 if ( tty_hung_up_p ( pFile ) ) {
1582
1583 ip2trace (CHANN, ITRC_CLOSE, 2, 1, 2 );
1584
1585 return;
1586 }
1587 if ( tty->count > 1 ) { /* not the last close */
1588
1589 ip2trace (CHANN, ITRC_CLOSE, 2, 1, 3 );
1590
1591 return;
1592 }
1593 pCh->flags |= ASYNC_CLOSING; // last close actually
1594
1595 tty->closing = 1;
1596
1597 if (pCh->ClosingWaitTime != ASYNC_CLOSING_WAIT_NONE) {
1598 /*
1599 * Before we drop DTR, make sure the transmitter has completely drained.
1600 * This uses an timeout, after which the close
1601 * completes.
1602 */
1603 ip2_wait_until_sent(tty, pCh->ClosingWaitTime );
1604 }
1605 /*
1606 * At this point we stop accepting input. Here we flush the channel
1607 * input buffer which will allow the board to send up more data. Any
1608 * additional input is tossed at interrupt/poll time.
1609 */
1610 i2InputFlush( pCh );
1611
1612 /* disable DSS reporting */
1613 i2QueueCommands(PTYPE_INLINE, pCh, 100, 4,
1614 CMD_DCD_NREP, CMD_CTS_NREP, CMD_DSR_NREP, CMD_RI_NREP);
1615 if ( !tty || (tty->termios->c_cflag & HUPCL) ) {
1616 i2QueueCommands(PTYPE_INLINE, pCh, 100, 2, CMD_RTSDN, CMD_DTRDN);
1617 pCh->dataSetOut &= ~(I2_DTR | I2_RTS);
1618 i2QueueCommands( PTYPE_INLINE, pCh, 100, 1, CMD_PAUSE(25));
1619 }
1620
1621 serviceOutgoingFifo ( pCh->pMyBord );
1622
1623 if ( tty->driver->flush_buffer )
1624 tty->driver->flush_buffer(tty);
1625 if ( tty->ldisc.flush_buffer )
1626 tty->ldisc.flush_buffer(tty);
1627 tty->closing = 0;
1628
1629 pCh->pTTY = NULL;
1630
1631 if (pCh->wopen) {
1632 if (pCh->ClosingDelay) {
1633 msleep_interruptible(jiffies_to_msecs(pCh->ClosingDelay));
1634 }
1635 wake_up_interruptible(&pCh->open_wait);
1636 }
1637
1638 pCh->flags &=~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
1639 wake_up_interruptible(&pCh->close_wait);
1640
1641#ifdef IP2DEBUG_OPEN
1642 DBG_CNT("ip2_close: after wakeups--");
1643#endif
1644
1645
1646 ip2trace (CHANN, ITRC_CLOSE, ITRC_RETURN, 1, 1 );
1647
1648 return;
1649}
1650
1651/******************************************************************************/
1652/* Function: ip2_hangup() */
1653/* Parameters: Pointer to tty structure */
1654/* Returns: Nothing */
1655/* */
1656/* Description: */
1657/* */
1658/* */
1659/******************************************************************************/
1660static void
1661ip2_hangup ( PTTY tty )
1662{
1663 i2ChanStrPtr pCh = tty->driver_data;
1664
1665 if( !pCh ) {
1666 return;
1667 }
1668
1669 ip2trace (CHANN, ITRC_HANGUP, ITRC_ENTER, 0 );
1670
1671 ip2_flush_buffer(tty);
1672
1673 /* disable DSS reporting */
1674
1675 i2QueueCommands(PTYPE_BYPASS, pCh, 0, 1, CMD_DCD_NREP);
1676 i2QueueCommands(PTYPE_INLINE, pCh, 0, 2, CMD_CTSFL_DSAB, CMD_RTSFL_DSAB);
1677 if ( (tty->termios->c_cflag & HUPCL) ) {
1678 i2QueueCommands(PTYPE_BYPASS, pCh, 0, 2, CMD_RTSDN, CMD_DTRDN);
1679 pCh->dataSetOut &= ~(I2_DTR | I2_RTS);
1680 i2QueueCommands( PTYPE_INLINE, pCh, 100, 1, CMD_PAUSE(25));
1681 }
1682 i2QueueCommands(PTYPE_INLINE, pCh, 1, 3,
1683 CMD_CTS_NREP, CMD_DSR_NREP, CMD_RI_NREP);
1684 serviceOutgoingFifo ( pCh->pMyBord );
1685
1686 wake_up_interruptible ( &pCh->delta_msr_wait );
1687
1688 pCh->flags &= ~ASYNC_NORMAL_ACTIVE;
1689 pCh->pTTY = NULL;
1690 wake_up_interruptible ( &pCh->open_wait );
1691
1692 ip2trace (CHANN, ITRC_HANGUP, ITRC_RETURN, 0 );
1693}
1694
1695/******************************************************************************/
1696/******************************************************************************/
1697/* Device Output Section */
1698/******************************************************************************/
1699/******************************************************************************/
1700
1701/******************************************************************************/
1702/* Function: ip2_write() */
1703/* Parameters: Pointer to tty structure */
1704/* Flag denoting data is in user (1) or kernel (0) space */
1705/* Pointer to data */
1706/* Number of bytes to write */
1707/* Returns: Number of bytes actually written */
1708/* */
1709/* Description: (MANDATORY) */
1710/* */
1711/* */
1712/******************************************************************************/
1713static int
1714ip2_write( PTTY tty, int user, const unsigned char *pData, int count)
1715{
1716 i2ChanStrPtr pCh = tty->driver_data;
1717 int bytesSent = 0;
1718 unsigned long flags;
1719
1720 ip2trace (CHANN, ITRC_WRITE, ITRC_ENTER, 2, count, -1 );
1721
1722 /* Flush out any buffered data left over from ip2_putchar() calls. */
1723 ip2_flush_chars( tty );
1724
1725 /* This is the actual move bit. Make sure it does what we need!!!!! */
1726 WRITE_LOCK_IRQSAVE(&pCh->Pbuf_spinlock,flags);
1727 bytesSent = i2Output( pCh, pData, count, user );
1728 WRITE_UNLOCK_IRQRESTORE(&pCh->Pbuf_spinlock,flags);
1729
1730 ip2trace (CHANN, ITRC_WRITE, ITRC_RETURN, 1, bytesSent );
1731
1732 return bytesSent > 0 ? bytesSent : 0;
1733}
1734
1735/******************************************************************************/
1736/* Function: ip2_putchar() */
1737/* Parameters: Pointer to tty structure */
1738/* Character to write */
1739/* Returns: Nothing */
1740/* */
1741/* Description: */
1742/* */
1743/* */
1744/******************************************************************************/
1745static void
1746ip2_putchar( PTTY tty, unsigned char ch )
1747{
1748 i2ChanStrPtr pCh = tty->driver_data;
1749 unsigned long flags;
1750
1751// ip2trace (CHANN, ITRC_PUTC, ITRC_ENTER, 1, ch );
1752
1753 WRITE_LOCK_IRQSAVE(&pCh->Pbuf_spinlock,flags);
1754 pCh->Pbuf[pCh->Pbuf_stuff++] = ch;
1755 if ( pCh->Pbuf_stuff == sizeof pCh->Pbuf ) {
1756 WRITE_UNLOCK_IRQRESTORE(&pCh->Pbuf_spinlock,flags);
1757 ip2_flush_chars( tty );
1758 } else
1759 WRITE_UNLOCK_IRQRESTORE(&pCh->Pbuf_spinlock,flags);
1760
1761// ip2trace (CHANN, ITRC_PUTC, ITRC_RETURN, 1, ch );
1762}
1763
1764/******************************************************************************/
1765/* Function: ip2_flush_chars() */
1766/* Parameters: Pointer to tty structure */
1767/* Returns: Nothing */
1768/* */
1769/* Description: */
1770/* */
1771/******************************************************************************/
1772static void
1773ip2_flush_chars( PTTY tty )
1774{
1775 int strip;
1776 i2ChanStrPtr pCh = tty->driver_data;
1777 unsigned long flags;
1778
1779 WRITE_LOCK_IRQSAVE(&pCh->Pbuf_spinlock,flags);
1780 if ( pCh->Pbuf_stuff ) {
1781
1782// ip2trace (CHANN, ITRC_PUTC, 10, 1, strip );
1783
1784 //
1785 // We may need to restart i2Output if it does not fullfill this request
1786 //
1787 strip = i2Output( pCh, pCh->Pbuf, pCh->Pbuf_stuff, 0 );
1788 if ( strip != pCh->Pbuf_stuff ) {
1789 memmove( pCh->Pbuf, &pCh->Pbuf[strip], pCh->Pbuf_stuff - strip );
1790 }
1791 pCh->Pbuf_stuff -= strip;
1792 }
1793 WRITE_UNLOCK_IRQRESTORE(&pCh->Pbuf_spinlock,flags);
1794}
1795
1796/******************************************************************************/
1797/* Function: ip2_write_room() */
1798/* Parameters: Pointer to tty structure */
1799/* Returns: Number of bytes that the driver can accept */
1800/* */
1801/* Description: */
1802/* */
1803/******************************************************************************/
1804static int
1805ip2_write_room ( PTTY tty )
1806{
1807 int bytesFree;
1808 i2ChanStrPtr pCh = tty->driver_data;
1809 unsigned long flags;
1810
1811 READ_LOCK_IRQSAVE(&pCh->Pbuf_spinlock,flags);
1812 bytesFree = i2OutputFree( pCh ) - pCh->Pbuf_stuff;
1813 READ_UNLOCK_IRQRESTORE(&pCh->Pbuf_spinlock,flags);
1814
1815 ip2trace (CHANN, ITRC_WRITE, 11, 1, bytesFree );
1816
1817 return ((bytesFree > 0) ? bytesFree : 0);
1818}
1819
1820/******************************************************************************/
1821/* Function: ip2_chars_in_buf() */
1822/* Parameters: Pointer to tty structure */
1823/* Returns: Number of bytes queued for transmission */
1824/* */
1825/* Description: */
1826/* */
1827/* */
1828/******************************************************************************/
1829static int
1830ip2_chars_in_buf ( PTTY tty )
1831{
1832 i2ChanStrPtr pCh = tty->driver_data;
1833 int rc;
1834 unsigned long flags;
1835
1836 ip2trace (CHANN, ITRC_WRITE, 12, 1, pCh->Obuf_char_count + pCh->Pbuf_stuff );
1837
1838#ifdef IP2DEBUG_WRITE
1839 printk (KERN_DEBUG "IP2: chars in buffer = %d (%d,%d)\n",
1840 pCh->Obuf_char_count + pCh->Pbuf_stuff,
1841 pCh->Obuf_char_count, pCh->Pbuf_stuff );
1842#endif
1843 READ_LOCK_IRQSAVE(&pCh->Obuf_spinlock,flags);
1844 rc = pCh->Obuf_char_count;
1845 READ_UNLOCK_IRQRESTORE(&pCh->Obuf_spinlock,flags);
1846 READ_LOCK_IRQSAVE(&pCh->Pbuf_spinlock,flags);
1847 rc += pCh->Pbuf_stuff;
1848 READ_UNLOCK_IRQRESTORE(&pCh->Pbuf_spinlock,flags);
1849 return rc;
1850}
1851
1852/******************************************************************************/
1853/* Function: ip2_flush_buffer() */
1854/* Parameters: Pointer to tty structure */
1855/* Returns: Nothing */
1856/* */
1857/* Description: */
1858/* */
1859/* */
1860/******************************************************************************/
1861static void
1862ip2_flush_buffer( PTTY tty )
1863{
1864 i2ChanStrPtr pCh = tty->driver_data;
1865 unsigned long flags;
1866
1867 ip2trace (CHANN, ITRC_FLUSH, ITRC_ENTER, 0 );
1868
1869#ifdef IP2DEBUG_WRITE
1870 printk (KERN_DEBUG "IP2: flush buffer\n" );
1871#endif
1872 WRITE_LOCK_IRQSAVE(&pCh->Pbuf_spinlock,flags);
1873 pCh->Pbuf_stuff = 0;
1874 WRITE_UNLOCK_IRQRESTORE(&pCh->Pbuf_spinlock,flags);
1875 i2FlushOutput( pCh );
1876 ip2_owake(tty);
1877
1878 ip2trace (CHANN, ITRC_FLUSH, ITRC_RETURN, 0 );
1879
1880}
1881
1882/******************************************************************************/
1883/* Function: ip2_wait_until_sent() */
1884/* Parameters: Pointer to tty structure */
1885/* Timeout for wait. */
1886/* Returns: Nothing */
1887/* */
1888/* Description: */
1889/* This function is used in place of the normal tty_wait_until_sent, which */
1890/* only waits for the driver buffers to be empty (or rather, those buffers */
1891/* reported by chars_in_buffer) which doesn't work for IP2 due to the */
1892/* indeterminate number of bytes buffered on the board. */
1893/******************************************************************************/
1894static void
1895ip2_wait_until_sent ( PTTY tty, int timeout )
1896{
1897 int i = jiffies;
1898 i2ChanStrPtr pCh = tty->driver_data;
1899
1900 tty_wait_until_sent(tty, timeout );
1901 if ( (i = timeout - (jiffies -i)) > 0)
1902 i2DrainOutput( pCh, i );
1903}
1904
1905/******************************************************************************/
1906/******************************************************************************/
1907/* Device Input Section */
1908/******************************************************************************/
1909/******************************************************************************/
1910
1911/******************************************************************************/
1912/* Function: ip2_throttle() */
1913/* Parameters: Pointer to tty structure */
1914/* Returns: Nothing */
1915/* */
1916/* Description: */
1917/* */
1918/* */
1919/******************************************************************************/
1920static void
1921ip2_throttle ( PTTY tty )
1922{
1923 i2ChanStrPtr pCh = tty->driver_data;
1924
1925#ifdef IP2DEBUG_READ
1926 printk (KERN_DEBUG "IP2: throttle\n" );
1927#endif
1928 /*
1929 * Signal the poll/interrupt handlers not to forward incoming data to
1930 * the line discipline. This will cause the buffers to fill up in the
1931 * library and thus cause the library routines to send the flow control
1932 * stuff.
1933 */
1934 pCh->throttled = 1;
1935}
1936
1937/******************************************************************************/
1938/* Function: ip2_unthrottle() */
1939/* Parameters: Pointer to tty structure */
1940/* Returns: Nothing */
1941/* */
1942/* Description: */
1943/* */
1944/* */
1945/******************************************************************************/
1946static void
1947ip2_unthrottle ( PTTY tty )
1948{
1949 i2ChanStrPtr pCh = tty->driver_data;
1950 unsigned long flags;
1951
1952#ifdef IP2DEBUG_READ
1953 printk (KERN_DEBUG "IP2: unthrottle\n" );
1954#endif
1955
1956 /* Pass incoming data up to the line discipline again. */
1957 pCh->throttled = 0;
1958 i2QueueCommands(PTYPE_BYPASS, pCh, 0, 1, CMD_RESUME);
1959 serviceOutgoingFifo( pCh->pMyBord );
1960 READ_LOCK_IRQSAVE(&pCh->Ibuf_spinlock,flags)
1961 if ( pCh->Ibuf_stuff != pCh->Ibuf_strip ) {
1962 READ_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,flags)
1963#ifdef IP2DEBUG_READ
1964 printk (KERN_DEBUG "i2Input called from unthrottle\n" );
1965#endif
1966 i2Input( pCh );
1967 } else
1968 READ_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,flags)
1969}
1970
1971static void
1972ip2_start ( PTTY tty )
1973{
1974 i2ChanStrPtr pCh = DevTable[tty->index];
1975
1976 i2QueueCommands(PTYPE_BYPASS, pCh, 0, 1, CMD_RESUME);
1977 i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_UNSUSPEND);
1978 i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_RESUME);
1979#ifdef IP2DEBUG_WRITE
1980 printk (KERN_DEBUG "IP2: start tx\n" );
1981#endif
1982}
1983
1984static void
1985ip2_stop ( PTTY tty )
1986{
1987 i2ChanStrPtr pCh = DevTable[tty->index];
1988
1989 i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_SUSPEND);
1990#ifdef IP2DEBUG_WRITE
1991 printk (KERN_DEBUG "IP2: stop tx\n" );
1992#endif
1993}
1994
1995/******************************************************************************/
1996/* Device Ioctl Section */
1997/******************************************************************************/
1998
1999static int ip2_tiocmget(struct tty_struct *tty, struct file *file)
2000{
2001 i2ChanStrPtr pCh = DevTable[tty->index];
2002 wait_queue_t wait;
2003
2004 if (pCh == NULL)
2005 return -ENODEV;
2006
2007/*
2008 FIXME - the following code is causing a NULL pointer dereference in
2009 2.3.51 in an interrupt handler. It's suppose to prompt the board
2010 to return the DSS signal status immediately. Why doesn't it do
2011 the same thing in 2.2.14?
2012*/
2013
2014/* This thing is still busted in the 1.2.12 driver on 2.4.x
2015 and even hoses the serial console so the oops can be trapped.
2016 /\/\|=mhw=|\/\/ */
2017
2018#ifdef ENABLE_DSSNOW
2019 i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_DSS_NOW);
2020
2021 init_waitqueue_entry(&wait, current);
2022 add_wait_queue(&pCh->dss_now_wait, &wait);
2023 set_current_state( TASK_INTERRUPTIBLE );
2024
2025 serviceOutgoingFifo( pCh->pMyBord );
2026
2027 schedule();
2028
2029 set_current_state( TASK_RUNNING );
2030 remove_wait_queue(&pCh->dss_now_wait, &wait);
2031
2032 if (signal_pending(current)) {
2033 return -EINTR;
2034 }
2035#endif
2036 return ((pCh->dataSetOut & I2_RTS) ? TIOCM_RTS : 0)
2037 | ((pCh->dataSetOut & I2_DTR) ? TIOCM_DTR : 0)
2038 | ((pCh->dataSetIn & I2_DCD) ? TIOCM_CAR : 0)
2039 | ((pCh->dataSetIn & I2_RI) ? TIOCM_RNG : 0)
2040 | ((pCh->dataSetIn & I2_DSR) ? TIOCM_DSR : 0)
2041 | ((pCh->dataSetIn & I2_CTS) ? TIOCM_CTS : 0);
2042}
2043
2044static int ip2_tiocmset(struct tty_struct *tty, struct file *file,
2045 unsigned int set, unsigned int clear)
2046{
2047 i2ChanStrPtr pCh = DevTable[tty->index];
2048
2049 if (pCh == NULL)
2050 return -ENODEV;
2051
2052 if (set & TIOCM_RTS) {
2053 i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_RTSUP);
2054 pCh->dataSetOut |= I2_RTS;
2055 }
2056 if (set & TIOCM_DTR) {
2057 i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DTRUP);
2058 pCh->dataSetOut |= I2_DTR;
2059 }
2060
2061 if (clear & TIOCM_RTS) {
2062 i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_RTSDN);
2063 pCh->dataSetOut &= ~I2_RTS;
2064 }
2065 if (clear & TIOCM_DTR) {
2066 i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DTRDN);
2067 pCh->dataSetOut &= ~I2_DTR;
2068 }
2069 serviceOutgoingFifo( pCh->pMyBord );
2070 return 0;
2071}
2072
2073/******************************************************************************/
2074/* Function: ip2_ioctl() */
2075/* Parameters: Pointer to tty structure */
2076/* Pointer to file structure */
2077/* Command */
2078/* Argument */
2079/* Returns: Success or failure */
2080/* */
2081/* Description: */
2082/* */
2083/* */
2084/******************************************************************************/
2085static int
2086ip2_ioctl ( PTTY tty, struct file *pFile, UINT cmd, ULONG arg )
2087{
2088 wait_queue_t wait;
2089 i2ChanStrPtr pCh = DevTable[tty->index];
2090 struct async_icount cprev, cnow; /* kernel counter temps */
2091 struct serial_icounter_struct __user *p_cuser;
2092 int rc = 0;
2093 unsigned long flags;
2094 void __user *argp = (void __user *)arg;
2095
2096 if ( pCh == NULL ) {
2097 return -ENODEV;
2098 }
2099
2100 ip2trace (CHANN, ITRC_IOCTL, ITRC_ENTER, 2, cmd, arg );
2101
2102#ifdef IP2DEBUG_IOCTL
2103 printk(KERN_DEBUG "IP2: ioctl cmd (%x), arg (%lx)\n", cmd, arg );
2104#endif
2105
2106 switch(cmd) {
2107 case TIOCGSERIAL:
2108
2109 ip2trace (CHANN, ITRC_IOCTL, 2, 1, rc );
2110
2111 rc = get_serial_info(pCh, argp);
2112 if (rc)
2113 return rc;
2114 break;
2115
2116 case TIOCSSERIAL:
2117
2118 ip2trace (CHANN, ITRC_IOCTL, 3, 1, rc );
2119
2120 rc = set_serial_info(pCh, argp);
2121 if (rc)
2122 return rc;
2123 break;
2124
2125 case TCXONC:
2126 rc = tty_check_change(tty);
2127 if (rc)
2128 return rc;
2129 switch (arg) {
2130 case TCOOFF:
2131 //return -ENOIOCTLCMD;
2132 break;
2133 case TCOON:
2134 //return -ENOIOCTLCMD;
2135 break;
2136 case TCIOFF:
2137 if (STOP_CHAR(tty) != __DISABLED_CHAR) {
2138 i2QueueCommands( PTYPE_BYPASS, pCh, 100, 1,
2139 CMD_XMIT_NOW(STOP_CHAR(tty)));
2140 }
2141 break;
2142 case TCION:
2143 if (START_CHAR(tty) != __DISABLED_CHAR) {
2144 i2QueueCommands( PTYPE_BYPASS, pCh, 100, 1,
2145 CMD_XMIT_NOW(START_CHAR(tty)));
2146 }
2147 break;
2148 default:
2149 return -EINVAL;
2150 }
2151 return 0;
2152
2153 case TCSBRK: /* SVID version: non-zero arg --> no break */
2154 rc = tty_check_change(tty);
2155
2156 ip2trace (CHANN, ITRC_IOCTL, 4, 1, rc );
2157
2158 if (!rc) {
2159 ip2_wait_until_sent(tty,0);
2160 if (!arg) {
2161 i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_SEND_BRK(250));
2162 serviceOutgoingFifo( pCh->pMyBord );
2163 }
2164 }
2165 break;
2166
2167 case TCSBRKP: /* support for POSIX tcsendbreak() */
2168 rc = tty_check_change(tty);
2169
2170 ip2trace (CHANN, ITRC_IOCTL, 5, 1, rc );
2171
2172 if (!rc) {
2173 ip2_wait_until_sent(tty,0);
2174 i2QueueCommands(PTYPE_INLINE, pCh, 100, 1,
2175 CMD_SEND_BRK(arg ? arg*100 : 250));
2176 serviceOutgoingFifo ( pCh->pMyBord );
2177 }
2178 break;
2179
2180 case TIOCGSOFTCAR:
2181
2182 ip2trace (CHANN, ITRC_IOCTL, 6, 1, rc );
2183
2184 rc = put_user(C_CLOCAL(tty) ? 1 : 0, (unsigned long __user *)argp);
2185 if (rc)
2186 return rc;
2187 break;
2188
2189 case TIOCSSOFTCAR:
2190
2191 ip2trace (CHANN, ITRC_IOCTL, 7, 1, rc );
2192
2193 rc = get_user(arg,(unsigned long __user *) argp);
2194 if (rc)
2195 return rc;
2196 tty->termios->c_cflag = ((tty->termios->c_cflag & ~CLOCAL)
2197 | (arg ? CLOCAL : 0));
2198
2199 break;
2200
2201 /*
2202 * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change - mask
2203 * passed in arg for lines of interest (use |'ed TIOCM_RNG/DSR/CD/CTS
2204 * for masking). Caller should use TIOCGICOUNT to see which one it was
2205 */
2206 case TIOCMIWAIT:
2207 save_flags(flags);cli();
2208 cprev = pCh->icount; /* note the counters on entry */
2209 restore_flags(flags);
2210 i2QueueCommands(PTYPE_BYPASS, pCh, 100, 4,
2211 CMD_DCD_REP, CMD_CTS_REP, CMD_DSR_REP, CMD_RI_REP);
2212 init_waitqueue_entry(&wait, current);
2213 add_wait_queue(&pCh->delta_msr_wait, &wait);
2214 set_current_state( TASK_INTERRUPTIBLE );
2215
2216 serviceOutgoingFifo( pCh->pMyBord );
2217 for(;;) {
2218 ip2trace (CHANN, ITRC_IOCTL, 10, 0 );
2219
2220 schedule();
2221
2222 ip2trace (CHANN, ITRC_IOCTL, 11, 0 );
2223
2224 /* see if a signal did it */
2225 if (signal_pending(current)) {
2226 rc = -ERESTARTSYS;
2227 break;
2228 }
2229 save_flags(flags);cli();
2230 cnow = pCh->icount; /* atomic copy */
2231 restore_flags(flags);
2232 if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
2233 cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) {
2234 rc = -EIO; /* no change => rc */
2235 break;
2236 }
2237 if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
2238 ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
2239 ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) ||
2240 ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts)) ) {
2241 rc = 0;
2242 break;
2243 }
2244 cprev = cnow;
2245 }
2246 set_current_state( TASK_RUNNING );
2247 remove_wait_queue(&pCh->delta_msr_wait, &wait);
2248
2249 i2QueueCommands(PTYPE_BYPASS, pCh, 100, 3,
2250 CMD_CTS_NREP, CMD_DSR_NREP, CMD_RI_NREP);
2251 if ( ! (pCh->flags & ASYNC_CHECK_CD)) {
2252 i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_DCD_NREP);
2253 }
2254 serviceOutgoingFifo( pCh->pMyBord );
2255 return rc;
2256 break;
2257
2258 /*
2259 * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
2260 * Return: write counters to the user passed counter struct
2261 * NB: both 1->0 and 0->1 transitions are counted except for RI where
2262 * only 0->1 is counted. The controller is quite capable of counting
2263 * both, but this done to preserve compatibility with the standard
2264 * serial driver.
2265 */
2266 case TIOCGICOUNT:
2267 ip2trace (CHANN, ITRC_IOCTL, 11, 1, rc );
2268
2269 save_flags(flags);cli();
2270 cnow = pCh->icount;
2271 restore_flags(flags);
2272 p_cuser = argp;
2273 rc = put_user(cnow.cts, &p_cuser->cts);
2274 rc = put_user(cnow.dsr, &p_cuser->dsr);
2275 rc = put_user(cnow.rng, &p_cuser->rng);
2276 rc = put_user(cnow.dcd, &p_cuser->dcd);
2277 rc = put_user(cnow.rx, &p_cuser->rx);
2278 rc = put_user(cnow.tx, &p_cuser->tx);
2279 rc = put_user(cnow.frame, &p_cuser->frame);
2280 rc = put_user(cnow.overrun, &p_cuser->overrun);
2281 rc = put_user(cnow.parity, &p_cuser->parity);
2282 rc = put_user(cnow.brk, &p_cuser->brk);
2283 rc = put_user(cnow.buf_overrun, &p_cuser->buf_overrun);
2284 break;
2285
2286 /*
2287 * The rest are not supported by this driver. By returning -ENOIOCTLCMD they
2288 * will be passed to the line discipline for it to handle.
2289 */
2290 case TIOCSERCONFIG:
2291 case TIOCSERGWILD:
2292 case TIOCSERGETLSR:
2293 case TIOCSERSWILD:
2294 case TIOCSERGSTRUCT:
2295 case TIOCSERGETMULTI:
2296 case TIOCSERSETMULTI:
2297
2298 default:
2299 ip2trace (CHANN, ITRC_IOCTL, 12, 0 );
2300
2301 rc = -ENOIOCTLCMD;
2302 break;
2303 }
2304
2305 ip2trace (CHANN, ITRC_IOCTL, ITRC_RETURN, 0 );
2306
2307 return rc;
2308}
2309
2310/******************************************************************************/
2311/* Function: GetSerialInfo() */
2312/* Parameters: Pointer to channel structure */
2313/* Pointer to old termios structure */
2314/* Returns: Nothing */
2315/* */
2316/* Description: */
2317/* This is to support the setserial command, and requires processing of the */
2318/* standard Linux serial structure. */
2319/******************************************************************************/
2320static int
2321get_serial_info ( i2ChanStrPtr pCh, struct serial_struct __user *retinfo )
2322{
2323 struct serial_struct tmp;
2324
2325 memset ( &tmp, 0, sizeof(tmp) );
2326 tmp.type = pCh->pMyBord->channelBtypes.bid_value[(pCh->port_index & (IP2_PORTS_PER_BOARD-1))/16];
2327 if (BID_HAS_654(tmp.type)) {
2328 tmp.type = PORT_16650;
2329 } else {
2330 tmp.type = PORT_CIRRUS;
2331 }
2332 tmp.line = pCh->port_index;
2333 tmp.port = pCh->pMyBord->i2eBase;
2334 tmp.irq = ip2config.irq[pCh->port_index/64];
2335 tmp.flags = pCh->flags;
2336 tmp.baud_base = pCh->BaudBase;
2337 tmp.close_delay = pCh->ClosingDelay;
2338 tmp.closing_wait = pCh->ClosingWaitTime;
2339 tmp.custom_divisor = pCh->BaudDivisor;
2340 return copy_to_user(retinfo,&tmp,sizeof(*retinfo));
2341}
2342
2343/******************************************************************************/
2344/* Function: SetSerialInfo() */
2345/* Parameters: Pointer to channel structure */
2346/* Pointer to old termios structure */
2347/* Returns: Nothing */
2348/* */
2349/* Description: */
2350/* This function provides support for setserial, which uses the TIOCSSERIAL */
2351/* ioctl. Not all setserial parameters are relevant. If the user attempts to */
2352/* change the IRQ, address or type of the port the ioctl fails. */
2353/******************************************************************************/
2354static int
2355set_serial_info( i2ChanStrPtr pCh, struct serial_struct __user *new_info )
2356{
2357 struct serial_struct ns;
2358 int old_flags, old_baud_divisor;
2359
2360 if (copy_from_user(&ns, new_info, sizeof (ns)))
2361 return -EFAULT;
2362
2363 /*
2364 * We don't allow setserial to change IRQ, board address, type or baud
2365 * base. Also line nunber as such is meaningless but we use it for our
2366 * array index so it is fixed also.
2367 */
2368 if ( (ns.irq != ip2config.irq[pCh->port_index])
2369 || ((int) ns.port != ((int) (pCh->pMyBord->i2eBase)))
2370 || (ns.baud_base != pCh->BaudBase)
2371 || (ns.line != pCh->port_index) ) {
2372 return -EINVAL;
2373 }
2374
2375 old_flags = pCh->flags;
2376 old_baud_divisor = pCh->BaudDivisor;
2377
2378 if ( !capable(CAP_SYS_ADMIN) ) {
2379 if ( ( ns.close_delay != pCh->ClosingDelay ) ||
2380 ( (ns.flags & ~ASYNC_USR_MASK) !=
2381 (pCh->flags & ~ASYNC_USR_MASK) ) ) {
2382 return -EPERM;
2383 }
2384
2385 pCh->flags = (pCh->flags & ~ASYNC_USR_MASK) |
2386 (ns.flags & ASYNC_USR_MASK);
2387 pCh->BaudDivisor = ns.custom_divisor;
2388 } else {
2389 pCh->flags = (pCh->flags & ~ASYNC_FLAGS) |
2390 (ns.flags & ASYNC_FLAGS);
2391 pCh->BaudDivisor = ns.custom_divisor;
2392 pCh->ClosingDelay = ns.close_delay * HZ/100;
2393 pCh->ClosingWaitTime = ns.closing_wait * HZ/100;
2394 }
2395
2396 if ( ( (old_flags & ASYNC_SPD_MASK) != (pCh->flags & ASYNC_SPD_MASK) )
2397 || (old_baud_divisor != pCh->BaudDivisor) ) {
2398 // Invalidate speed and reset parameters
2399 set_params( pCh, NULL );
2400 }
2401
2402 return 0;
2403}
2404
2405/******************************************************************************/
2406/* Function: ip2_set_termios() */
2407/* Parameters: Pointer to tty structure */
2408/* Pointer to old termios structure */
2409/* Returns: Nothing */
2410/* */
2411/* Description: */
2412/* */
2413/* */
2414/******************************************************************************/
2415static void
2416ip2_set_termios( PTTY tty, struct termios *old_termios )
2417{
2418 i2ChanStrPtr pCh = (i2ChanStrPtr)tty->driver_data;
2419
2420#ifdef IP2DEBUG_IOCTL
2421 printk (KERN_DEBUG "IP2: set termios %p\n", old_termios );
2422#endif
2423
2424 set_params( pCh, old_termios );
2425}
2426
2427/******************************************************************************/
2428/* Function: ip2_set_line_discipline() */
2429/* Parameters: Pointer to tty structure */
2430/* Returns: Nothing */
2431/* */
2432/* Description: Does nothing */
2433/* */
2434/* */
2435/******************************************************************************/
2436static void
2437ip2_set_line_discipline ( PTTY tty )
2438{
2439#ifdef IP2DEBUG_IOCTL
2440 printk (KERN_DEBUG "IP2: set line discipline\n" );
2441#endif
2442
2443 ip2trace (((i2ChanStrPtr)tty->driver_data)->port_index, ITRC_IOCTL, 16, 0 );
2444
2445}
2446
2447/******************************************************************************/
2448/* Function: SetLine Characteristics() */
2449/* Parameters: Pointer to channel structure */
2450/* Returns: Nothing */
2451/* */
2452/* Description: */
2453/* This routine is called to update the channel structure with the new line */
2454/* characteristics, and send the appropriate commands to the board when they */
2455/* change. */
2456/******************************************************************************/
2457static void
2458set_params( i2ChanStrPtr pCh, struct termios *o_tios )
2459{
2460 tcflag_t cflag, iflag, lflag;
2461 char stop_char, start_char;
2462 struct termios dummy;
2463
2464 lflag = pCh->pTTY->termios->c_lflag;
2465 cflag = pCh->pTTY->termios->c_cflag;
2466 iflag = pCh->pTTY->termios->c_iflag;
2467
2468 if (o_tios == NULL) {
2469 dummy.c_lflag = ~lflag;
2470 dummy.c_cflag = ~cflag;
2471 dummy.c_iflag = ~iflag;
2472 o_tios = &dummy;
2473 }
2474
2475 {
2476 switch ( cflag & CBAUD ) {
2477 case B0:
2478 i2QueueCommands( PTYPE_BYPASS, pCh, 100, 2, CMD_RTSDN, CMD_DTRDN);
2479 pCh->dataSetOut &= ~(I2_DTR | I2_RTS);
2480 i2QueueCommands( PTYPE_INLINE, pCh, 100, 1, CMD_PAUSE(25));
2481 pCh->pTTY->termios->c_cflag |= (CBAUD & o_tios->c_cflag);
2482 goto service_it;
2483 break;
2484 case B38400:
2485 /*
2486 * This is the speed that is overloaded with all the other high
2487 * speeds, depending upon the flag settings.
2488 */
2489 if ( ( pCh->flags & ASYNC_SPD_MASK ) == ASYNC_SPD_HI ) {
2490 pCh->speed = CBR_57600;
2491 } else if ( (pCh->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI ) {
2492 pCh->speed = CBR_115200;
2493 } else if ( (pCh->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST ) {
2494 pCh->speed = CBR_C1;
2495 } else {
2496 pCh->speed = CBR_38400;
2497 }
2498 break;
2499 case B50: pCh->speed = CBR_50; break;
2500 case B75: pCh->speed = CBR_75; break;
2501 case B110: pCh->speed = CBR_110; break;
2502 case B134: pCh->speed = CBR_134; break;
2503 case B150: pCh->speed = CBR_150; break;
2504 case B200: pCh->speed = CBR_200; break;
2505 case B300: pCh->speed = CBR_300; break;
2506 case B600: pCh->speed = CBR_600; break;
2507 case B1200: pCh->speed = CBR_1200; break;
2508 case B1800: pCh->speed = CBR_1800; break;
2509 case B2400: pCh->speed = CBR_2400; break;
2510 case B4800: pCh->speed = CBR_4800; break;
2511 case B9600: pCh->speed = CBR_9600; break;
2512 case B19200: pCh->speed = CBR_19200; break;
2513 case B57600: pCh->speed = CBR_57600; break;
2514 case B115200: pCh->speed = CBR_115200; break;
2515 case B153600: pCh->speed = CBR_153600; break;
2516 case B230400: pCh->speed = CBR_230400; break;
2517 case B307200: pCh->speed = CBR_307200; break;
2518 case B460800: pCh->speed = CBR_460800; break;
2519 case B921600: pCh->speed = CBR_921600; break;
2520 default: pCh->speed = CBR_9600; break;
2521 }
2522 if ( pCh->speed == CBR_C1 ) {
2523 // Process the custom speed parameters.
2524 int bps = pCh->BaudBase / pCh->BaudDivisor;
2525 if ( bps == 921600 ) {
2526 pCh->speed = CBR_921600;
2527 } else {
2528 bps = bps/10;
2529 i2QueueCommands( PTYPE_INLINE, pCh, 100, 1, CMD_BAUD_DEF1(bps) );
2530 }
2531 }
2532 i2QueueCommands( PTYPE_INLINE, pCh, 100, 1, CMD_SETBAUD(pCh->speed));
2533
2534 i2QueueCommands ( PTYPE_INLINE, pCh, 100, 2, CMD_DTRUP, CMD_RTSUP);
2535 pCh->dataSetOut |= (I2_DTR | I2_RTS);
2536 }
2537 if ( (CSTOPB & cflag) ^ (CSTOPB & o_tios->c_cflag))
2538 {
2539 i2QueueCommands ( PTYPE_INLINE, pCh, 100, 1,
2540 CMD_SETSTOP( ( cflag & CSTOPB ) ? CST_2 : CST_1));
2541 }
2542 if (((PARENB|PARODD) & cflag) ^ ((PARENB|PARODD) & o_tios->c_cflag))
2543 {
2544 i2QueueCommands ( PTYPE_INLINE, pCh, 100, 1,
2545 CMD_SETPAR(
2546 (cflag & PARENB ? (cflag & PARODD ? CSP_OD : CSP_EV) : CSP_NP)
2547 )
2548 );
2549 }
2550 /* byte size and parity */
2551 if ( (CSIZE & cflag)^(CSIZE & o_tios->c_cflag))
2552 {
2553 int datasize;
2554 switch ( cflag & CSIZE ) {
2555 case CS5: datasize = CSZ_5; break;
2556 case CS6: datasize = CSZ_6; break;
2557 case CS7: datasize = CSZ_7; break;
2558 case CS8: datasize = CSZ_8; break;
2559 default: datasize = CSZ_5; break; /* as per serial.c */
2560 }
2561 i2QueueCommands ( PTYPE_INLINE, pCh, 100, 1, CMD_SETBITS(datasize) );
2562 }
2563 /* Process CTS flow control flag setting */
2564 if ( (cflag & CRTSCTS) ) {
2565 i2QueueCommands(PTYPE_INLINE, pCh, 100,
2566 2, CMD_CTSFL_ENAB, CMD_RTSFL_ENAB);
2567 } else {
2568 i2QueueCommands(PTYPE_INLINE, pCh, 100,
2569 2, CMD_CTSFL_DSAB, CMD_RTSFL_DSAB);
2570 }
2571 //
2572 // Process XON/XOFF flow control flags settings
2573 //
2574 stop_char = STOP_CHAR(pCh->pTTY);
2575 start_char = START_CHAR(pCh->pTTY);
2576
2577 //////////// can't be \000
2578 if (stop_char == __DISABLED_CHAR )
2579 {
2580 stop_char = ~__DISABLED_CHAR;
2581 }
2582 if (start_char == __DISABLED_CHAR )
2583 {
2584 start_char = ~__DISABLED_CHAR;
2585 }
2586 /////////////////////////////////
2587
2588 if ( o_tios->c_cc[VSTART] != start_char )
2589 {
2590 i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_DEF_IXON(start_char));
2591 i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DEF_OXON(start_char));
2592 }
2593 if ( o_tios->c_cc[VSTOP] != stop_char )
2594 {
2595 i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_DEF_IXOFF(stop_char));
2596 i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DEF_OXOFF(stop_char));
2597 }
2598 if (stop_char == __DISABLED_CHAR )
2599 {
2600 stop_char = ~__DISABLED_CHAR; //TEST123
2601 goto no_xoff;
2602 }
2603 if ((iflag & (IXOFF))^(o_tios->c_iflag & (IXOFF)))
2604 {
2605 if ( iflag & IXOFF ) { // Enable XOFF output flow control
2606 i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_OXON_OPT(COX_XON));
2607 } else { // Disable XOFF output flow control
2608no_xoff:
2609 i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_OXON_OPT(COX_NONE));
2610 }
2611 }
2612 if (start_char == __DISABLED_CHAR )
2613 {
2614 goto no_xon;
2615 }
2616 if ((iflag & (IXON|IXANY)) ^ (o_tios->c_iflag & (IXON|IXANY)))
2617 {
2618 if ( iflag & IXON ) {
2619 if ( iflag & IXANY ) { // Enable XON/XANY output flow control
2620 i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_IXON_OPT(CIX_XANY));
2621 } else { // Enable XON output flow control
2622 i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_IXON_OPT(CIX_XON));
2623 }
2624 } else { // Disable XON output flow control
2625no_xon:
2626 i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_IXON_OPT(CIX_NONE));
2627 }
2628 }
2629 if ( (iflag & ISTRIP) ^ ( o_tios->c_iflag & (ISTRIP)) )
2630 {
2631 i2QueueCommands(PTYPE_INLINE, pCh, 100, 1,
2632 CMD_ISTRIP_OPT((iflag & ISTRIP ? 1 : 0)));
2633 }
2634 if ( (iflag & INPCK) ^ ( o_tios->c_iflag & (INPCK)) )
2635 {
2636 i2QueueCommands(PTYPE_INLINE, pCh, 100, 1,
2637 CMD_PARCHK((iflag & INPCK) ? CPK_ENAB : CPK_DSAB));
2638 }
2639
2640 if ( (iflag & (IGNBRK|PARMRK|BRKINT|IGNPAR))
2641 ^ ( o_tios->c_iflag & (IGNBRK|PARMRK|BRKINT|IGNPAR)) )
2642 {
2643 char brkrpt = 0;
2644 char parrpt = 0;
2645
2646 if ( iflag & IGNBRK ) { /* Ignore breaks altogether */
2647 /* Ignore breaks altogether */
2648 i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_BRK_NREP);
2649 } else {
2650 if ( iflag & BRKINT ) {
2651 if ( iflag & PARMRK ) {
2652 brkrpt = 0x0a; // exception an inline triple
2653 } else {
2654 brkrpt = 0x1a; // exception and NULL
2655 }
2656 brkrpt |= 0x04; // flush input
2657 } else {
2658 if ( iflag & PARMRK ) {
2659 brkrpt = 0x0b; //POSIX triple \0377 \0 \0
2660 } else {
2661 brkrpt = 0x01; // Null only
2662 }
2663 }
2664 i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_BRK_REP(brkrpt));
2665 }
2666
2667 if (iflag & IGNPAR) {
2668 parrpt = 0x20;
2669 /* would be 2 for not cirrus bug */
2670 /* would be 0x20 cept for cirrus bug */
2671 } else {
2672 if ( iflag & PARMRK ) {
2673 /*
2674 * Replace error characters with 3-byte sequence (\0377,\0,char)
2675 */
2676 parrpt = 0x04 ;
2677 i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_ISTRIP_OPT((char)0));
2678 } else {
2679 parrpt = 0x03;
2680 }
2681 }
2682 i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_SET_ERROR(parrpt));
2683 }
2684 if (cflag & CLOCAL) {
2685 // Status reporting fails for DCD if this is off
2686 i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DCD_NREP);
2687 pCh->flags &= ~ASYNC_CHECK_CD;
2688 } else {
2689 i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DCD_REP);
2690 pCh->flags |= ASYNC_CHECK_CD;
2691 }
2692
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]2693service_it:
2694 i2DrainOutput( pCh, 100 );
2695}
2696
2697/******************************************************************************/
2698/* IPL Device Section */
2699/******************************************************************************/
2700
2701/******************************************************************************/
2702/* Function: ip2_ipl_read() */
2703/* Parameters: Pointer to device inode */
2704/* Pointer to file structure */
2705/* Pointer to data */
2706/* Number of bytes to read */
2707/* Returns: Success or failure */
2708/* */
2709/* Description: Ugly */
2710/* */
2711/* */
2712/******************************************************************************/
2713
2714static
2715ssize_t
2716ip2_ipl_read(struct file *pFile, char __user *pData, size_t count, loff_t *off )
2717{
2718 unsigned int minor = iminor(pFile->f_dentry->d_inode);
2719 int rc = 0;
2720
2721#ifdef IP2DEBUG_IPL
2722 printk (KERN_DEBUG "IP2IPL: read %p, %d bytes\n", pData, count );
2723#endif
2724
2725 switch( minor ) {
2726 case 0: // IPL device
2727 rc = -EINVAL;
2728 break;
2729 case 1: // Status dump
2730 rc = -EINVAL;
2731 break;
2732 case 2: // Ping device
2733 rc = -EINVAL;
2734 break;
2735 case 3: // Trace device
2736 rc = DumpTraceBuffer ( pData, count );
2737 break;
2738 case 4: // Trace device
2739 rc = DumpFifoBuffer ( pData, count );
2740 break;
2741 default:
2742 rc = -ENODEV;
2743 break;
2744 }
2745 return rc;
2746}
2747
2748static int
2749DumpFifoBuffer ( char __user *pData, int count )
2750{
2751#ifdef DEBUG_FIFO
2752 int rc;
2753 rc = copy_to_user(pData, DBGBuf, count);
2754
2755 printk(KERN_DEBUG "Last index %d\n", I );
2756
2757 return count;
2758#endif /* DEBUG_FIFO */
2759 return 0;
2760}
2761
2762static int
2763DumpTraceBuffer ( char __user *pData, int count )
2764{
2765#ifdef IP2DEBUG_TRACE
2766 int rc;
2767 int dumpcount;
2768 int chunk;
2769 int *pIndex = (int __user *)pData;
2770
2771 if ( count < (sizeof(int) * 6) ) {
2772 return -EIO;
2773 }
2774 rc = put_user(tracewrap, pIndex );
2775 rc = put_user(TRACEMAX, ++pIndex );
2776 rc = put_user(tracestrip, ++pIndex );
2777 rc = put_user(tracestuff, ++pIndex );
2778 pData += sizeof(int) * 6;
2779 count -= sizeof(int) * 6;
2780
2781 dumpcount = tracestuff - tracestrip;
2782 if ( dumpcount < 0 ) {
2783 dumpcount += TRACEMAX;
2784 }
2785 if ( dumpcount > count ) {
2786 dumpcount = count;
2787 }
2788 chunk = TRACEMAX - tracestrip;
2789 if ( dumpcount > chunk ) {
2790 rc = copy_to_user(pData, &tracebuf[tracestrip],
2791 chunk * sizeof(tracebuf[0]) );
2792 pData += chunk * sizeof(tracebuf[0]);
2793 tracestrip = 0;
2794 chunk = dumpcount - chunk;
2795 } else {
2796 chunk = dumpcount;
2797 }
2798 rc = copy_to_user(pData, &tracebuf[tracestrip],
2799 chunk * sizeof(tracebuf[0]) );
2800 tracestrip += chunk;
2801 tracewrap = 0;
2802
2803 rc = put_user(tracestrip, ++pIndex );
2804 rc = put_user(tracestuff, ++pIndex );
2805
2806 return dumpcount;
2807#else
2808 return 0;
2809#endif
2810}
2811
2812/******************************************************************************/
2813/* Function: ip2_ipl_write() */
2814/* Parameters: */
2815/* Pointer to file structure */
2816/* Pointer to data */
2817/* Number of bytes to write */
2818/* Returns: Success or failure */
2819/* */
2820/* Description: */
2821/* */
2822/* */
2823/******************************************************************************/
2824static ssize_t
2825ip2_ipl_write(struct file *pFile, const char __user *pData, size_t count, loff_t *off)
2826{
2827#ifdef IP2DEBUG_IPL
2828 printk (KERN_DEBUG "IP2IPL: write %p, %d bytes\n", pData, count );
2829#endif
2830 return 0;
2831}
2832
2833/******************************************************************************/
2834/* Function: ip2_ipl_ioctl() */
2835/* Parameters: Pointer to device inode */
2836/* Pointer to file structure */
2837/* Command */
2838/* Argument */
2839/* Returns: Success or failure */
2840/* */
2841/* Description: */
2842/* */
2843/* */
2844/******************************************************************************/
2845static int
2846ip2_ipl_ioctl ( struct inode *pInode, struct file *pFile, UINT cmd, ULONG arg )
2847{
2848 unsigned int iplminor = iminor(pInode);
2849 int rc = 0;
2850 void __user *argp = (void __user *)arg;
2851 ULONG __user *pIndex = argp;
2852 i2eBordStrPtr pB = i2BoardPtrTable[iplminor / 4];
2853 i2ChanStrPtr pCh;
2854
2855#ifdef IP2DEBUG_IPL
2856 printk (KERN_DEBUG "IP2IPL: ioctl cmd %d, arg %ld\n", cmd, arg );
2857#endif
2858
2859 switch ( iplminor ) {
2860 case 0: // IPL device
2861 rc = -EINVAL;
2862 break;
2863 case 1: // Status dump
2864 case 5:
2865 case 9:
2866 case 13:
2867 switch ( cmd ) {
2868 case 64: /* Driver - ip2stat */
2869 rc = put_user(ip2_tty_driver->refcount, pIndex++ );
2870 rc = put_user(irq_counter, pIndex++ );
2871 rc = put_user(bh_counter, pIndex++ );
2872 break;
2873
2874 case 65: /* Board - ip2stat */
2875 if ( pB ) {
2876 rc = copy_to_user(argp, pB, sizeof(i2eBordStr));
2877 rc = put_user(INB(pB->i2eStatus),
2878 (ULONG __user *)(arg + (ULONG)(&pB->i2eStatus) - (ULONG)pB ) );
2879 } else {
2880 rc = -ENODEV;
2881 }
2882 break;
2883
2884 default:
2885 if (cmd < IP2_MAX_PORTS) {
2886 pCh = DevTable[cmd];
2887 if ( pCh )
2888 {
2889 rc = copy_to_user(argp, pCh, sizeof(i2ChanStr));
2890 } else {
2891 rc = -ENODEV;
2892 }
2893 } else {
2894 rc = -EINVAL;
2895 }
2896 }
2897 break;
2898
2899 case 2: // Ping device
2900 rc = -EINVAL;
2901 break;
2902 case 3: // Trace device
2903 if ( cmd == 1 ) {
2904 rc = put_user(iiSendPendingMail, pIndex++ );
2905 rc = put_user(i2InitChannels, pIndex++ );
2906 rc = put_user(i2QueueNeeds, pIndex++ );
2907 rc = put_user(i2QueueCommands, pIndex++ );
2908 rc = put_user(i2GetStatus, pIndex++ );
2909 rc = put_user(i2Input, pIndex++ );
2910 rc = put_user(i2InputFlush, pIndex++ );
2911 rc = put_user(i2Output, pIndex++ );
2912 rc = put_user(i2FlushOutput, pIndex++ );
2913 rc = put_user(i2DrainWakeup, pIndex++ );
2914 rc = put_user(i2DrainOutput, pIndex++ );
2915 rc = put_user(i2OutputFree, pIndex++ );
2916 rc = put_user(i2StripFifo, pIndex++ );
2917 rc = put_user(i2StuffFifoBypass, pIndex++ );
2918 rc = put_user(i2StuffFifoFlow, pIndex++ );
2919 rc = put_user(i2StuffFifoInline, pIndex++ );
2920 rc = put_user(i2ServiceBoard, pIndex++ );
2921 rc = put_user(serviceOutgoingFifo, pIndex++ );
2922 // rc = put_user(ip2_init, pIndex++ );
2923 rc = put_user(ip2_init_board, pIndex++ );
2924 rc = put_user(find_eisa_board, pIndex++ );
2925 rc = put_user(set_irq, pIndex++ );
2926 rc = put_user(ip2_interrupt, pIndex++ );
2927 rc = put_user(ip2_poll, pIndex++ );
2928 rc = put_user(service_all_boards, pIndex++ );
2929 rc = put_user(do_input, pIndex++ );
2930 rc = put_user(do_status, pIndex++ );
2931#ifndef IP2DEBUG_OPEN
2932 rc = put_user(0, pIndex++ );
2933#else
2934 rc = put_user(open_sanity_check, pIndex++ );
2935#endif
2936 rc = put_user(ip2_open, pIndex++ );
2937 rc = put_user(ip2_close, pIndex++ );
2938 rc = put_user(ip2_hangup, pIndex++ );
2939 rc = put_user(ip2_write, pIndex++ );
2940 rc = put_user(ip2_putchar, pIndex++ );
2941 rc = put_user(ip2_flush_chars, pIndex++ );
2942 rc = put_user(ip2_write_room, pIndex++ );
2943 rc = put_user(ip2_chars_in_buf, pIndex++ );
2944 rc = put_user(ip2_flush_buffer, pIndex++ );
2945
2946 //rc = put_user(ip2_wait_until_sent, pIndex++ );
2947 rc = put_user(0, pIndex++ );
2948
2949 rc = put_user(ip2_throttle, pIndex++ );
2950 rc = put_user(ip2_unthrottle, pIndex++ );
2951 rc = put_user(ip2_ioctl, pIndex++ );
2952 rc = put_user(0, pIndex++ );
2953 rc = put_user(get_serial_info, pIndex++ );
2954 rc = put_user(set_serial_info, pIndex++ );
2955 rc = put_user(ip2_set_termios, pIndex++ );
2956 rc = put_user(ip2_set_line_discipline, pIndex++ );
2957 rc = put_user(set_params, pIndex++ );
2958 } else {
2959 rc = -EINVAL;
2960 }
2961
2962 break;
2963
2964 default:
2965 rc = -ENODEV;
2966 break;
2967 }
2968 return rc;
2969}
2970
2971/******************************************************************************/
2972/* Function: ip2_ipl_open() */
2973/* Parameters: Pointer to device inode */
2974/* Pointer to file structure */
2975/* Returns: Success or failure */
2976/* */
2977/* Description: */
2978/* */
2979/* */
2980/******************************************************************************/
2981static int
2982ip2_ipl_open( struct inode *pInode, struct file *pFile )
2983{
2984 unsigned int iplminor = iminor(pInode);
2985 i2eBordStrPtr pB;
2986 i2ChanStrPtr pCh;
2987
2988#ifdef IP2DEBUG_IPL
2989 printk (KERN_DEBUG "IP2IPL: open\n" );
2990#endif
2991
2992 switch(iplminor) {
2993 // These are the IPL devices
2994 case 0:
2995 case 4:
2996 case 8:
2997 case 12:
2998 break;
2999
3000 // These are the status devices
3001 case 1:
3002 case 5:
3003 case 9:
3004 case 13:
3005 break;
3006
3007 // These are the debug devices
3008 case 2:
3009 case 6:
3010 case 10:
3011 case 14:
3012 pB = i2BoardPtrTable[iplminor / 4];
3013 pCh = (i2ChanStrPtr) pB->i2eChannelPtr;
3014 break;
3015
3016 // This is the trace device
3017 case 3:
3018 break;
3019 }
3020 return 0;
3021}
3022/******************************************************************************/
3023/* Function: ip2_read_procmem */
3024/* Parameters: */
3025/* */
3026/* Returns: Length of output */
3027/* */
3028/* Description: */
3029/* Supplies some driver operating parameters */
3030/* Not real useful unless your debugging the fifo */
3031/* */
3032/******************************************************************************/
3033
3034#define LIMIT (PAGE_SIZE - 120)
3035
3036static int
3037ip2_read_procmem(char *buf, char **start, off_t offset, int len)
3038{
3039 i2eBordStrPtr pB;
3040 i2ChanStrPtr pCh;
3041 PTTY tty;
3042 int i;
3043
3044 len = 0;
3045
3046#define FMTLINE "%3d: 0x%08x 0x%08x 0%011o 0%011o\n"
3047#define FMTLIN2 " 0x%04x 0x%04x tx flow 0x%x\n"
3048#define FMTLIN3 " 0x%04x 0x%04x rc flow\n"
3049
3050 len += sprintf(buf+len,"\n");
3051
3052 for( i = 0; i < IP2_MAX_BOARDS; ++i ) {
3053 pB = i2BoardPtrTable[i];
3054 if ( pB ) {
3055 len += sprintf(buf+len,"board %d:\n",i);
3056 len += sprintf(buf+len,"\tFifo rem: %d mty: %x outM %x\n",
3057 pB->i2eFifoRemains,pB->i2eWaitingForEmptyFifo,pB->i2eOutMailWaiting);
3058 }
3059 }
3060
3061 len += sprintf(buf+len,"#: tty flags, port flags, cflags, iflags\n");
3062 for (i=0; i < IP2_MAX_PORTS; i++) {
3063 if (len > LIMIT)
3064 break;
3065 pCh = DevTable[i];
3066 if (pCh) {
3067 tty = pCh->pTTY;
3068 if (tty && tty->count) {
3069 len += sprintf(buf+len,FMTLINE,i,(int)tty->flags,pCh->flags,
3070 tty->termios->c_cflag,tty->termios->c_iflag);
3071
3072 len += sprintf(buf+len,FMTLIN2,
3073 pCh->outfl.asof,pCh->outfl.room,pCh->channelNeeds);
3074 len += sprintf(buf+len,FMTLIN3,pCh->infl.asof,pCh->infl.room);
3075 }
3076 }
3077 }
3078 return len;
3079}
3080
3081/*
3082 * This is the handler for /proc/tty/driver/ip2
3083 *
3084 * This stretch of code has been largely plagerized from at least three
3085 * different sources including ip2mkdev.c and a couple of other drivers.
3086 * The bugs are all mine. :-) =mhw=
3087 */
3088static int ip2_read_proc(char *page, char **start, off_t off,
3089 int count, int *eof, void *data)
3090{
3091 int i, j, box;
3092 int len = 0;
3093 int boxes = 0;
3094 int ports = 0;
3095 int tports = 0;
3096 off_t begin = 0;
3097 i2eBordStrPtr pB;
3098
3099 len += sprintf(page, "ip2info: 1.0 driver: %s\n", pcVersion );
3100 len += sprintf(page+len, "Driver: SMajor=%d CMajor=%d IMajor=%d MaxBoards=%d MaxBoxes=%d MaxPorts=%d\n",
3101 IP2_TTY_MAJOR, IP2_CALLOUT_MAJOR, IP2_IPL_MAJOR,
3102 IP2_MAX_BOARDS, ABS_MAX_BOXES, ABS_BIGGEST_BOX);
3103
3104 for( i = 0; i < IP2_MAX_BOARDS; ++i ) {
3105 /* This need to be reset for a board by board count... */
3106 boxes = 0;
3107 pB = i2BoardPtrTable[i];
3108 if( pB ) {
3109 switch( pB->i2ePom.e.porID & ~POR_ID_RESERVED )
3110 {
3111 case POR_ID_FIIEX:
3112 len += sprintf( page+len, "Board %d: EX ports=", i );
3113 for( box = 0; box < ABS_MAX_BOXES; ++box )
3114 {
3115 ports = 0;
3116
3117 if( pB->i2eChannelMap[box] != 0 ) ++boxes;
3118 for( j = 0; j < ABS_BIGGEST_BOX; ++j )
3119 {
3120 if( pB->i2eChannelMap[box] & 1<< j ) {
3121 ++ports;
3122 }
3123 }
3124 len += sprintf( page+len, "%d,", ports );
3125 tports += ports;
3126 }
3127
3128 --len; /* Backup over that last comma */
3129
3130 len += sprintf( page+len, " boxes=%d width=%d", boxes, pB->i2eDataWidth16 ? 16 : 8 );
3131 break;
3132
3133 case POR_ID_II_4:
3134 len += sprintf(page+len, "Board %d: ISA-4 ports=4 boxes=1", i );
3135 tports = ports = 4;
3136 break;
3137
3138 case POR_ID_II_8:
3139 len += sprintf(page+len, "Board %d: ISA-8-std ports=8 boxes=1", i );
3140 tports = ports = 8;
3141 break;
3142
3143 case POR_ID_II_8R:
3144 len += sprintf(page+len, "Board %d: ISA-8-RJ11 ports=8 boxes=1", i );
3145 tports = ports = 8;
3146 break;
3147
3148 default:
3149 len += sprintf(page+len, "Board %d: unknown", i );
3150 /* Don't try and probe for minor numbers */
3151 tports = ports = 0;
3152 }
3153
3154 } else {
3155 /* Don't try and probe for minor numbers */
3156 len += sprintf(page+len, "Board %d: vacant", i );
3157 tports = ports = 0;
3158 }
3159
3160 if( tports ) {
3161 len += sprintf(page+len, " minors=" );
3162
3163 for ( box = 0; box < ABS_MAX_BOXES; ++box )
3164 {
3165 for ( j = 0; j < ABS_BIGGEST_BOX; ++j )
3166 {
3167 if ( pB->i2eChannelMap[box] & (1 << j) )
3168 {
3169 len += sprintf (page+len,"%d,",
3170 j + ABS_BIGGEST_BOX *
3171 (box+i*ABS_MAX_BOXES));
3172 }
3173 }
3174 }
3175
3176 page[ len - 1 ] = '\n'; /* Overwrite that last comma */
3177 } else {
3178 len += sprintf (page+len,"\n" );
3179 }
3180
3181 if (len+begin > off+count)
3182 break;
3183 if (len+begin < off) {
3184 begin += len;
3185 len = 0;
3186 }
3187 }
3188
3189 if (i >= IP2_MAX_BOARDS)
3190 *eof = 1;
3191 if (off >= len+begin)
3192 return 0;
3193
3194 *start = page + (off-begin);
3195 return ((count < begin+len-off) ? count : begin+len-off);
3196 }
3197
3198/******************************************************************************/
3199/* Function: ip2trace() */
3200/* Parameters: Value to add to trace buffer */
3201/* Returns: Nothing */
3202/* */
3203/* Description: */
3204/* */
3205/* */
3206/******************************************************************************/
3207#ifdef IP2DEBUG_TRACE
3208void
3209ip2trace (unsigned short pn, unsigned char cat, unsigned char label, unsigned long codes, ...)
3210{
3211 long flags;
3212 unsigned long *pCode = &codes;
3213 union ip2breadcrumb bc;
3214 i2ChanStrPtr pCh;
3215
3216
3217 tracebuf[tracestuff++] = jiffies;
3218 if ( tracestuff == TRACEMAX ) {
3219 tracestuff = 0;
3220 }
3221 if ( tracestuff == tracestrip ) {
3222 if ( ++tracestrip == TRACEMAX ) {
3223 tracestrip = 0;
3224 }
3225 ++tracewrap;
3226 }
3227
3228 bc.hdr.port = 0xff & pn;
3229 bc.hdr.cat = cat;
3230 bc.hdr.codes = (unsigned char)( codes & 0xff );
3231 bc.hdr.label = label;
3232 tracebuf[tracestuff++] = bc.value;
3233
3234 for (;;) {
3235 if ( tracestuff == TRACEMAX ) {
3236 tracestuff = 0;
3237 }
3238 if ( tracestuff == tracestrip ) {
3239 if ( ++tracestrip == TRACEMAX ) {
3240 tracestrip = 0;
3241 }
3242 ++tracewrap;
3243 }
3244
3245 if ( !codes-- )
3246 break;
3247
3248 tracebuf[tracestuff++] = *++pCode;
3249 }
3250}
3251#endif
3252
3253
3254MODULE_LICENSE("GPL");