blob: a0b403a6b4ed81cec6eefa343f03e275b0202f0b [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * Disk Array driver for Compaq SMART2 Controllers
3 * Copyright 1998 Compaq Computer Corporation
4 *
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License as published by
7 * the Free Software Foundation; either version 2 of the License, or
8 * (at your option) any later version.
9 *
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
13 * NON INFRINGEMENT. See the GNU General Public License for more details.
14 *
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, write to the Free Software
17 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
18 *
19 * Questions/Comments/Bugfixes to iss_storagedev@hp.com
20 *
21 * If you want to make changes, improve or add functionality to this
22 * driver, you'll probably need the Compaq Array Controller Interface
23 * Specificiation (Document number ECG086/1198)
24 */
25
26/*
27 * This file contains the controller communication implementation for
28 * Compaq SMART-1 and SMART-2 controllers. To the best of my knowledge,
29 * this should support:
30 *
31 * PCI:
32 * SMART-2/P, SMART-2DH, SMART-2SL, SMART-221, SMART-3100ES, SMART-3200
33 * Integerated SMART Array Controller, SMART-4200, SMART-4250ES
34 *
35 * EISA:
36 * SMART-2/E, SMART, IAES, IDA-2, IDA
37 */
38
39/*
40 * Memory mapped FIFO interface (SMART 42xx cards)
41 */
42static void smart4_submit_command(ctlr_info_t *h, cmdlist_t *c)
43{
44 writel(c->busaddr, h->vaddr + S42XX_REQUEST_PORT_OFFSET);
45}
46
47/*
48 * This card is the opposite of the other cards.
49 * 0 turns interrupts on...
50 * 0x08 turns them off...
51 */
52static void smart4_intr_mask(ctlr_info_t *h, unsigned long val)
53{
54 if (val)
55 { /* Turn interrupts on */
56 writel(0, h->vaddr + S42XX_REPLY_INTR_MASK_OFFSET);
57 } else /* Turn them off */
58 {
59 writel( S42XX_INTR_OFF,
60 h->vaddr + S42XX_REPLY_INTR_MASK_OFFSET);
61 }
62}
63
64/*
65 * For older cards FIFO Full = 0.
66 * On this card 0 means there is room, anything else FIFO Full.
67 *
68 */
69static unsigned long smart4_fifo_full(ctlr_info_t *h)
70{
71
72 return (!readl(h->vaddr + S42XX_REQUEST_PORT_OFFSET));
73}
74
75/* This type of controller returns -1 if the fifo is empty,
76 * Not 0 like the others.
77 * And we need to let it know we read a value out
78 */
79static unsigned long smart4_completed(ctlr_info_t *h)
80{
81 long register_value
82 = readl(h->vaddr + S42XX_REPLY_PORT_OFFSET);
83
84 /* Fifo is empty */
85 if( register_value == 0xffffffff)
86 return 0;
87
88 /* Need to let it know we got the reply */
89 /* We do this by writing a 0 to the port we just read from */
90 writel(0, h->vaddr + S42XX_REPLY_PORT_OFFSET);
91
92 return ((unsigned long) register_value);
93}
94
95 /*
96 * This hardware returns interrupt pending at a different place and
97 * it does not tell us if the fifo is empty, we will have check
98 * that by getting a 0 back from the comamnd_completed call.
99 */
100static unsigned long smart4_intr_pending(ctlr_info_t *h)
101{
102 unsigned long register_value =
103 readl(h->vaddr + S42XX_INTR_STATUS);
104
105 if( register_value & S42XX_INTR_PENDING)
106 return FIFO_NOT_EMPTY;
107 return 0 ;
108}
109
110static struct access_method smart4_access = {
111 smart4_submit_command,
112 smart4_intr_mask,
113 smart4_fifo_full,
114 smart4_intr_pending,
115 smart4_completed,
116};
117
118/*
119 * Memory mapped FIFO interface (PCI SMART2 and SMART 3xxx cards)
120 */
121static void smart2_submit_command(ctlr_info_t *h, cmdlist_t *c)
122{
123 writel(c->busaddr, h->vaddr + COMMAND_FIFO);
124}
125
126static void smart2_intr_mask(ctlr_info_t *h, unsigned long val)
127{
128 writel(val, h->vaddr + INTR_MASK);
129}
130
131static unsigned long smart2_fifo_full(ctlr_info_t *h)
132{
133 return readl(h->vaddr + COMMAND_FIFO);
134}
135
136static unsigned long smart2_completed(ctlr_info_t *h)
137{
138 return readl(h->vaddr + COMMAND_COMPLETE_FIFO);
139}
140
141static unsigned long smart2_intr_pending(ctlr_info_t *h)
142{
143 return readl(h->vaddr + INTR_PENDING);
144}
145
146static struct access_method smart2_access = {
147 smart2_submit_command,
148 smart2_intr_mask,
149 smart2_fifo_full,
150 smart2_intr_pending,
151 smart2_completed,
152};
153
154/*
155 * IO access for SMART-2/E cards
156 */
157static void smart2e_submit_command(ctlr_info_t *h, cmdlist_t *c)
158{
159 outl(c->busaddr, h->io_mem_addr + COMMAND_FIFO);
160}
161
162static void smart2e_intr_mask(ctlr_info_t *h, unsigned long val)
163{
164 outl(val, h->io_mem_addr + INTR_MASK);
165}
166
167static unsigned long smart2e_fifo_full(ctlr_info_t *h)
168{
169 return inl(h->io_mem_addr + COMMAND_FIFO);
170}
171
172static unsigned long smart2e_completed(ctlr_info_t *h)
173{
174 return inl(h->io_mem_addr + COMMAND_COMPLETE_FIFO);
175}
176
177static unsigned long smart2e_intr_pending(ctlr_info_t *h)
178{
179 return inl(h->io_mem_addr + INTR_PENDING);
180}
181
182static struct access_method smart2e_access = {
183 smart2e_submit_command,
184 smart2e_intr_mask,
185 smart2e_fifo_full,
186 smart2e_intr_pending,
187 smart2e_completed,
188};
189
190/*
191 * IO access for older SMART-1 type cards
192 */
193#define SMART1_SYSTEM_MASK 0xC8E
194#define SMART1_SYSTEM_DOORBELL 0xC8F
195#define SMART1_LOCAL_MASK 0xC8C
196#define SMART1_LOCAL_DOORBELL 0xC8D
197#define SMART1_INTR_MASK 0xC89
198#define SMART1_LISTADDR 0xC90
199#define SMART1_LISTLEN 0xC94
200#define SMART1_TAG 0xC97
201#define SMART1_COMPLETE_ADDR 0xC98
202#define SMART1_LISTSTATUS 0xC9E
203
204#define CHANNEL_BUSY 0x01
205#define CHANNEL_CLEAR 0x02
206
207static void smart1_submit_command(ctlr_info_t *h, cmdlist_t *c)
208{
209 /*
210 * This __u16 is actually a bunch of control flags on SMART
211 * and below. We want them all to be zero.
212 */
213 c->hdr.size = 0;
214
215 outb(CHANNEL_CLEAR, h->io_mem_addr + SMART1_SYSTEM_DOORBELL);
216
217 outl(c->busaddr, h->io_mem_addr + SMART1_LISTADDR);
218 outw(c->size, h->io_mem_addr + SMART1_LISTLEN);
219
220 outb(CHANNEL_BUSY, h->io_mem_addr + SMART1_LOCAL_DOORBELL);
221}
222
223static void smart1_intr_mask(ctlr_info_t *h, unsigned long val)
224{
225 if (val == 1) {
226 outb(0xFD, h->io_mem_addr + SMART1_SYSTEM_DOORBELL);
227 outb(CHANNEL_BUSY, h->io_mem_addr + SMART1_LOCAL_DOORBELL);
228 outb(0x01, h->io_mem_addr + SMART1_INTR_MASK);
229 outb(0x01, h->io_mem_addr + SMART1_SYSTEM_MASK);
230 } else {
231 outb(0, h->io_mem_addr + 0xC8E);
232 }
233}
234
235static unsigned long smart1_fifo_full(ctlr_info_t *h)
236{
237 unsigned char chan;
238 chan = inb(h->io_mem_addr + SMART1_SYSTEM_DOORBELL) & CHANNEL_CLEAR;
239 return chan;
240}
241
242static unsigned long smart1_completed(ctlr_info_t *h)
243{
244 unsigned char status;
245 unsigned long cmd;
246
247 if (inb(h->io_mem_addr + SMART1_SYSTEM_DOORBELL) & CHANNEL_BUSY) {
248 outb(CHANNEL_BUSY, h->io_mem_addr + SMART1_SYSTEM_DOORBELL);
249
250 cmd = inl(h->io_mem_addr + SMART1_COMPLETE_ADDR);
251 status = inb(h->io_mem_addr + SMART1_LISTSTATUS);
252
253 outb(CHANNEL_CLEAR, h->io_mem_addr + SMART1_LOCAL_DOORBELL);
254
255 /*
256 * this is x86 (actually compaq x86) only, so it's ok
257 */
258 if (cmd) ((cmdlist_t*)bus_to_virt(cmd))->req.hdr.rcode = status;
259 } else {
260 cmd = 0;
261 }
262 return cmd;
263}
264
265static unsigned long smart1_intr_pending(ctlr_info_t *h)
266{
267 unsigned char chan;
268 chan = inb(h->io_mem_addr + SMART1_SYSTEM_DOORBELL) & CHANNEL_BUSY;
269 return chan;
270}
271
272static struct access_method smart1_access = {
273 smart1_submit_command,
274 smart1_intr_mask,
275 smart1_fifo_full,
276 smart1_intr_pending,
277 smart1_completed,
278};