blob: a83bc666e7ed101e80cc68aa84b1ef0956294204 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001config MIPS
2 bool
3 default y
4 # Horrible source of confusion. Die, die, die ...
5 select EMBEDDED
6
7config MIPS64
8 bool "64-bit kernel"
9 help
10 Select this option if you want to build a 64-bit kernel. You should
11 only select this option if you have hardware that actually has a
12 64-bit processor and if your application will actually benefit from
13 64-bit processing, otherwise say N. You must say Y for kernels for
14 SGI IP27 (Origin 200 and 2000) and SGI IP32 (O2). If in doubt say N.
15
16config 64BIT
17 def_bool MIPS64
18
19config MIPS32
20 bool
21 depends on MIPS64 = 'n'
22 default y
23
24mainmenu "Linux/MIPS Kernel Configuration"
25
26source "init/Kconfig"
27
28menu "Machine selection"
29
30config MACH_JAZZ
31 bool "Support for the Jazz family of machines"
32 select ARC
33 select ARC32
34 select GENERIC_ISA_DMA
35 select I8259
36 select ISA
37 help
38 This a family of machines based on the MIPS R4030 chipset which was
39 used by several vendors to build RISC/os and Windows NT workstations.
40 Members include the Acer PICA, MIPS Magnum 4000, MIPS Millenium and
41 Olivetti M700-10 workstations.
42
43config ACER_PICA_61
44 bool "Support for Acer PICA 1 chipset (EXPERIMENTAL)"
45 depends on MACH_JAZZ && EXPERIMENTAL
46 select DMA_NONCOHERENT
47 help
48 This is a machine with a R4400 133/150 MHz CPU. To compile a Linux
49 kernel that runs on these, say Y here. For details about Linux on
50 the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at
51 <http://www.linux-mips.org/>.
52
53config MIPS_MAGNUM_4000
54 bool "Support for MIPS Magnum 4000"
55 depends on MACH_JAZZ
56 select DMA_NONCOHERENT
57 help
58 This is a machine with a R4000 100 MHz CPU. To compile a Linux
59 kernel that runs on these, say Y here. For details about Linux on
60 the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at
61 <http://www.linux-mips.org/>.
62
63config OLIVETTI_M700
64 bool "Support for Olivetti M700-10"
65 depends on MACH_JAZZ
66 select DMA_NONCOHERENT
67 help
68 This is a machine with a R4000 100 MHz CPU. To compile a Linux
69 kernel that runs on these, say Y here. For details about Linux on
70 the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at
71 <http://www.linux-mips.org/>.
72
73config MACH_VR41XX
74 bool "Support for NEC VR41XX-based machines"
75
76config NEC_CMBVR4133
77 bool "Support for NEC CMB-VR4133"
78 depends on MACH_VR41XX
79 select CPU_VR41XX
80 select DMA_NONCOHERENT
81 select IRQ_CPU
82 select HW_HAS_PCI
Yoichi Yuasa8dd4aeb2005-09-03 15:56:14 -070083 select PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -070084 select PCI_VR41XX
85
86config ROCKHOPPER
87 bool "Support for Rockhopper baseboard"
88 depends on NEC_CMBVR4133
89 select I8259
90 select HAVE_STD_PC_SERIAL_PORT
91
92config CASIO_E55
93 bool "Support for CASIO CASSIOPEIA E-10/15/55/65"
94 depends on MACH_VR41XX
Yoichi Yuasa8dd4aeb2005-09-03 15:56:14 -070095 select CPU_LITTLE_ENDIAN
Linus Torvalds1da177e2005-04-16 15:20:36 -070096 select DMA_NONCOHERENT
97 select IRQ_CPU
98 select ISA
99
100config IBM_WORKPAD
101 bool "Support for IBM WorkPad z50"
102 depends on MACH_VR41XX
Yoichi Yuasa8dd4aeb2005-09-03 15:56:14 -0700103 select CPU_LITTLE_ENDIAN
Linus Torvalds1da177e2005-04-16 15:20:36 -0700104 select DMA_NONCOHERENT
105 select IRQ_CPU
106 select ISA
107
Yoichi Yuasa63b799f2005-09-03 15:56:13 -0700108config TANBAC_TB022X
109 bool "Support for TANBAC VR4131 multichip module and TANBAC VR4131DIMM"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700110 depends on MACH_VR41XX
Yoichi Yuasa63b799f2005-09-03 15:56:13 -0700111 select CPU_LITTLE_ENDIAN
Linus Torvalds1da177e2005-04-16 15:20:36 -0700112 select DMA_NONCOHERENT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700113 select IRQ_CPU
Yoichi Yuasa63b799f2005-09-03 15:56:13 -0700114 select HW_HAS_PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700115 help
Yoichi Yuasa63b799f2005-09-03 15:56:13 -0700116 The TANBAC VR4131 multichip module(TB0225) and
117 the TANBAC VR4131DIMM(TB0229) are MIPS-based platforms
118 manufactured by TANBAC.
119 Please refer to <http://www.tanbac.co.jp/>
120 about VR4131 multichip module and VR4131DIMM.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700121
Yoichi Yuasa63b799f2005-09-03 15:56:13 -0700122config TANBAC_TB0226
123 bool "Support for TANBAC Mbase(TB0226)"
124 depends on TANBAC_TB022X
125 select PCI
126 select PCI_VR41XX
127 select GPIO_VR41XX
Linus Torvalds1da177e2005-04-16 15:20:36 -0700128 help
Yoichi Yuasa63b799f2005-09-03 15:56:13 -0700129 The TANBAC Mbase(TB0226) is a MIPS-based platform manufactured by TANBAC.
130 Please refer to <http://www.tanbac.co.jp/> about Mbase.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700131
132config VICTOR_MPC30X
133 bool "Support for Victor MP-C303/304"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700134 depends on MACH_VR41XX
Yoichi Yuasa8dd4aeb2005-09-03 15:56:14 -0700135 select CPU_LITTLE_ENDIAN
136 select DMA_NONCOHERENT
137 select IRQ_CPU
138 select HW_HAS_PCI
139 select PCI
140 select PCI_VR41XX
Linus Torvalds1da177e2005-04-16 15:20:36 -0700141
142config ZAO_CAPCELLA
143 bool "Support for ZAO Networks Capcella"
144 depends on MACH_VR41XX
Yoichi Yuasa8dd4aeb2005-09-03 15:56:14 -0700145 select CPU_LITTLE_ENDIAN
Linus Torvalds1da177e2005-04-16 15:20:36 -0700146 select DMA_NONCOHERENT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700147 select IRQ_CPU
Yoichi Yuasa8dd4aeb2005-09-03 15:56:14 -0700148 select HW_HAS_PCI
149 select PCI
150 select PCI_VR41XX
Linus Torvalds1da177e2005-04-16 15:20:36 -0700151
152config PCI_VR41XX
153 bool "Add PCI control unit support of NEC VR4100 series"
154 depends on MACH_VR41XX && PCI
155
156config VRC4171
157 tristate "Add NEC VRC4171 companion chip support"
158 depends on MACH_VR41XX && ISA
159 ---help---
160 The NEC VRC4171/4171A is a companion chip for NEC VR4111/VR4121.
161
162config VRC4173
163 tristate "Add NEC VRC4173 companion chip support"
164 depends on MACH_VR41XX && PCI_VR41XX
165 ---help---
166 The NEC VRC4173 is a companion chip for NEC VR4122/VR4131.
167
168config TOSHIBA_JMR3927
169 bool "Support for Toshiba JMR-TX3927 board"
170 depends on MIPS32
171 select DMA_NONCOHERENT
172 select HW_HAS_PCI
173 select SWAP_IO_SPACE
174
175config MIPS_COBALT
176 bool "Support for Cobalt Server (EXPERIMENTAL)"
177 depends on EXPERIMENTAL
178 select DMA_NONCOHERENT
179 select HW_HAS_PCI
180 select I8259
181 select IRQ_CPU
182
183config MACH_DECSTATION
184 bool "Support for DECstations"
185 select BOOT_ELF32
186 select DMA_NONCOHERENT
187 select IRQ_CPU
188 depends on MIPS32 || EXPERIMENTAL
189 ---help---
190 This enables support for DEC's MIPS based workstations. For details
191 see the Linux/MIPS FAQ on <http://www.linux-mips.org/> and the
192 DECstation porting pages on <http://decstation.unix-ag.org/>.
193
194 If you have one of the following DECstation Models you definitely
195 want to choose R4xx0 for the CPU Type:
196
197 DECstation 5000/50
198 DECstation 5000/150
199 DECstation 5000/260
200 DECsystem 5900/260
201
202 otherwise choose R3000.
203
204config MIPS_EV64120
205 bool "Support for Galileo EV64120 Evaluation board (EXPERIMENTAL)"
206 depends on EXPERIMENTAL
207 select DMA_NONCOHERENT
208 select HW_HAS_PCI
209 select MIPS_GT64120
210 help
211 This is an evaluation board based on the Galileo GT-64120
212 single-chip system controller that contains a MIPS R5000 compatible
213 core running at 75/100MHz. Their website is located at
214 <http://www.marvell.com/>. Say Y here if you wish to build a
215 kernel for this platform.
216
217config EVB_PCI1
218 bool "Enable Second PCI (PCI1)"
219 depends on MIPS_EV64120
220
221config MIPS_EV96100
222 bool "Support for Galileo EV96100 Evaluation board (EXPERIMENTAL)"
223 depends on EXPERIMENTAL
224 select DMA_NONCOHERENT
225 select HW_HAS_PCI
226 select IRQ_CPU
227 select MIPS_GT96100
228 select RM7000_CPU_SCACHE
229 select SWAP_IO_SPACE
230 help
231 This is an evaluation board based on the Galileo GT-96100 LAN/WAN
232 communications controllers containing a MIPS R5000 compatible core
233 running at 83MHz. Their website is <http://www.marvell.com/>. Say Y
234 here if you wish to build a kernel for this platform.
235
236config MIPS_IVR
237 bool "Support for Globespan IVR board"
238 select DMA_NONCOHERENT
239 select HW_HAS_PCI
240 help
241 This is an evaluation board built by Globespan to showcase thir
242 iVR (Internet Video Recorder) design. It utilizes a QED RM5231
243 R5000 MIPS core. More information can be found out their website
244 located at <http://www.globespan.net/>. Say Y here if you wish to
245 build a kernel for this platform.
246
247config LASAT
248 bool "Support for LASAT Networks platforms"
249 select DMA_NONCOHERENT
250 select HW_HAS_PCI
251 select MIPS_GT64120
252 select R5000_CPU_SCACHE
253
254config PICVUE
255 tristate "PICVUE LCD display driver"
256 depends on LASAT
257
258config PICVUE_PROC
259 tristate "PICVUE LCD display driver /proc interface"
260 depends on PICVUE
261
262config DS1603
263 bool "DS1603 RTC driver"
264 depends on LASAT
265
266config LASAT_SYSCTL
267 bool "LASAT sysctl interface"
268 depends on LASAT
269
270config MIPS_ITE8172
271 bool "Support for ITE 8172G board"
272 select DMA_NONCOHERENT
273 select HW_HAS_PCI
274 help
275 Ths is an evaluation board made by ITE <http://www.ite.com.tw/>
276 with ATX form factor that utilizes a MIPS R5000 to work with its
277 ITE8172G companion internet appliance chip. The MIPS core can be
278 either a NEC Vr5432 or QED RM5231. Say Y here if you wish to build
279 a kernel for this platform.
280
281config IT8172_REVC
282 bool "Support for older IT8172 (Rev C)"
283 depends on MIPS_ITE8172
284 help
285 Say Y here to support the older, Revision C version of the Integrated
286 Technology Express, Inc. ITE8172 SBC. Vendor page at
287 <http://www.ite.com.tw/ia/brief_it8172bsp.htm>; picture of the
288 board at <http://www.mvista.com/partners/semiconductor/ite.html>.
289
290config MIPS_ATLAS
291 bool "Support for MIPS Atlas board"
292 select BOOT_ELF32
293 select DMA_NONCOHERENT
294 select HW_HAS_PCI
295 select MIPS_GT64120
296 select SWAP_IO_SPACE
297 help
298 This enables support for the QED R5231-based MIPS Atlas evaluation
299 board.
300
301config MIPS_MALTA
302 bool "Support for MIPS Malta board"
303 select BOOT_ELF32
304 select HAVE_STD_PC_SERIAL_PORT
305 select DMA_NONCOHERENT
306 select GENERIC_ISA_DMA
307 select HW_HAS_PCI
308 select I8259
309 select MIPS_GT64120
310 select SWAP_IO_SPACE
311 help
312 This enables support for the VR5000-based MIPS Malta evaluation
313 board.
314
315config MIPS_SEAD
316 bool "Support for MIPS SEAD board (EXPERIMENTAL)"
317 depends on EXPERIMENTAL
318 select IRQ_CPU
319 select DMA_NONCOHERENT
320
321config MOMENCO_OCELOT
322 bool "Support for Momentum Ocelot board"
323 select DMA_NONCOHERENT
324 select HW_HAS_PCI
325 select IRQ_CPU
326 select IRQ_CPU_RM7K
327 select MIPS_GT64120
328 select RM7000_CPU_SCACHE
329 select SWAP_IO_SPACE
330 help
331 The Ocelot is a MIPS-based Single Board Computer (SBC) made by
332 Momentum Computer <http://www.momenco.com/>.
333
334config MOMENCO_OCELOT_G
335 bool "Support for Momentum Ocelot-G board"
336 select DMA_NONCOHERENT
337 select HW_HAS_PCI
338 select IRQ_CPU
339 select IRQ_CPU_RM7K
340 select PCI_MARVELL
341 select RM7000_CPU_SCACHE
342 select SWAP_IO_SPACE
343 help
344 The Ocelot is a MIPS-based Single Board Computer (SBC) made by
345 Momentum Computer <http://www.momenco.com/>.
346
347config MOMENCO_OCELOT_C
348 bool "Support for Momentum Ocelot-C board"
349 select DMA_NONCOHERENT
350 select HW_HAS_PCI
351 select IRQ_CPU
352 select IRQ_MV64340
353 select PCI_MARVELL
354 select RM7000_CPU_SCACHE
355 select SWAP_IO_SPACE
356 help
357 The Ocelot is a MIPS-based Single Board Computer (SBC) made by
358 Momentum Computer <http://www.momenco.com/>.
359
360config MOMENCO_OCELOT_3
361 bool "Support for Momentum Ocelot-3 board"
362 select BOOT_ELF32
363 select DMA_NONCOHERENT
364 select HW_HAS_PCI
365 select IRQ_CPU
366 select IRQ_CPU_RM7K
367 select IRQ_MV64340
368 select PCI_MARVELL
369 select RM7000_CPU_SCACHE
370 select SWAP_IO_SPACE
371 help
372 The Ocelot-3 is based off Discovery III System Controller and
373 PMC-Sierra Rm79000 core.
374
375config MOMENCO_JAGUAR_ATX
376 bool "Support for Momentum Jaguar board"
377 select BOOT_ELF32
378 select DMA_NONCOHERENT
379 select HW_HAS_PCI
380 select IRQ_CPU
381 select IRQ_CPU_RM7K
382 select IRQ_MV64340
383 select LIMITED_DMA
384 select PCI_MARVELL
385 select RM7000_CPU_SCACHE
386 select SWAP_IO_SPACE
387 help
388 The Jaguar ATX is a MIPS-based Single Board Computer (SBC) made by
389 Momentum Computer <http://www.momenco.com/>.
390
391config JAGUAR_DMALOW
392 bool "Low DMA Mode"
393 depends on MOMENCO_JAGUAR_ATX
394 help
395 Select to Y if jump JP5 is set on your board, N otherwise. Normally
396 the jumper is set, so if you feel unsafe, just say Y.
397
398config PMC_YOSEMITE
399 bool "Support for PMC-Sierra Yosemite eval board"
400 select DMA_COHERENT
401 select HW_HAS_PCI
402 select IRQ_CPU
403 select IRQ_CPU_RM7K
404 select IRQ_CPU_RM9K
405 select SWAP_IO_SPACE
406 help
407 Yosemite is an evaluation board for the RM9000x2 processor
408 manufactured by PMC-Sierra
409
410config HYPERTRANSPORT
411 bool "Hypertransport Support for PMC-Sierra Yosemite"
412 depends on PMC_YOSEMITE
413
414config DDB5074
415 bool "Support for NEC DDB Vrc-5074 (EXPERIMENTAL)"
416 depends on EXPERIMENTAL
417 select DMA_NONCOHERENT
418 select HAVE_STD_PC_SERIAL_PORT
419 select HW_HAS_PCI
420 select IRQ_CPU
421 select I8259
422 select ISA
423 help
424 This enables support for the VR5000-based NEC DDB Vrc-5074
425 evaluation board.
426
427config DDB5476
428 bool "Support for NEC DDB Vrc-5476"
429 select DMA_NONCOHERENT
430 select HAVE_STD_PC_SERIAL_PORT
431 select HW_HAS_PCI
432 select IRQ_CPU
433 select I8259
434 select ISA
435 help
436 This enables support for the R5432-based NEC DDB Vrc-5476
437 evaluation board.
438
439 Features : kernel debugging, serial terminal, NFS root fs, on-board
440 ether port USB, AC97, PCI, PCI VGA card & framebuffer console,
441 IDE controller, PS2 keyboard, PS2 mouse, etc.
442
443config DDB5477
444 bool "Support for NEC DDB Vrc-5477"
445 select DMA_NONCOHERENT
446 select HW_HAS_PCI
447 select I8259
448 select IRQ_CPU
449 help
450 This enables support for the R5432-based NEC DDB Vrc-5477,
451 or Rockhopper/SolutionGear boards with R5432/R5500 CPUs.
452
453 Features : kernel debugging, serial terminal, NFS root fs, on-board
454 ether port USB, AC97, PCI, etc.
455
456config DDB5477_BUS_FREQUENCY
457 int "bus frequency (in kHZ, 0 for auto-detect)"
458 depends on DDB5477
459 default 0
460
Ralf Baechle07119622005-09-03 15:56:11 -0700461config QEMU
462 bool "Support for Qemu"
463 select DMA_COHERENT
464 select GENERIC_ISA_DMA
465 select HAVE_STD_PC_SERIAL_PORT
466 select I8259
467 select ISA
468 select SWAP_IO_SPACE
469 select SYS_SUPPORTS_32BIT_KERNEL
470 select SYS_SUPPORTS_BIG_ENDIAN
471 help
472 Qemu is a software emulator which among other architectures also
473 can simulate a MIPS32 4Kc system. This patch adds support for the
474 system architecture that currently is being simulated by Qemu. It
475 will eventually be removed again when Qemu has the capability to
476 simulate actual MIPS hardware platforms. More information on Qemu
477 can be found at http://www.linux-mips.org/wiki/Qemu.
478
Linus Torvalds1da177e2005-04-16 15:20:36 -0700479config SGI_IP22
480 bool "Support for SGI IP22 (Indy/Indigo2)"
481 select ARC
482 select ARC32
483 select BOOT_ELF32
484 select DMA_NONCOHERENT
485 select IP22_CPU_SCACHE
486 select IRQ_CPU
487 select SWAP_IO_SPACE
488 help
489 This are the SGI Indy, Challenge S and Indigo2, as well as certain
490 OEM variants like the Tandem CMN B006S. To compile a Linux kernel
491 that runs on these, say Y here.
492
493config SGI_IP27
494 bool "Support for SGI IP27 (Origin200/2000)"
495 depends on MIPS64
496 select ARC
497 select ARC64
498 select DMA_IP27
499 select HW_HAS_PCI
500 select PCI_DOMAINS
501 help
502 This are the SGI Origin 200, Origin 2000 and Onyx 2 Graphics
503 workstations. To compile a Linux kernel that runs on these, say Y
504 here.
505
506#config SGI_SN0_XXL
507# bool "IP27 XXL"
508# depends on SGI_IP27
509# This options adds support for userspace processes upto 16TB size.
510# Normally the limit is just .5TB.
511
512config SGI_SN0_N_MODE
513 bool "IP27 N-Mode"
514 depends on SGI_IP27
515 help
516 The nodes of Origin 200, Origin 2000 and Onyx 2 systems can be
517 configured in either N-Modes which allows for more nodes or M-Mode
518 which allows for more memory. Your system is most probably
519 running in M-Mode, so you should say N here.
520
Dave Hansen3f22ab22005-06-23 00:07:43 -0700521config ARCH_DISCONTIGMEM_ENABLE
Linus Torvalds1da177e2005-04-16 15:20:36 -0700522 bool
523 default y if SGI_IP27
524 help
525 Say Y to upport efficient handling of discontiguous physical memory,
526 for architectures which are either NUMA (Non-Uniform Memory Access)
527 or have huge holes in the physical address space for other reasons.
528 See <file:Documentation/vm/numa> for more.
529
530config NUMA
531 bool "NUMA Support"
532 depends on SGI_IP27
533 help
534 Say Y to compile the kernel to support NUMA (Non-Uniform Memory
535 Access). This option is for configuring high-end multiprocessor
536 server machines. If in doubt, say N.
537
538config MAPPED_KERNEL
539 bool "Mapped kernel support"
540 depends on SGI_IP27
541 help
542 Change the way a Linux kernel is loaded into memory on a MIPS64
543 machine. This is required in order to support text replication and
544 NUMA. If you need to understand it, read the source code.
545
546config REPLICATE_KTEXT
547 bool "Kernel text replication support"
548 depends on SGI_IP27
549 help
550 Say Y here to enable replicating the kernel text across multiple
551 nodes in a NUMA cluster. This trades memory for speed.
552
553config REPLICATE_EXHANDLERS
554 bool "Exception handler replication support"
555 depends on SGI_IP27
556 help
557 Say Y here to enable replicating the kernel exception handlers
558 across multiple nodes in a NUMA cluster. This trades memory for
559 speed.
560
561config SGI_IP32
562 bool "Support for SGI IP32 (O2) (EXPERIMENTAL)"
563 depends on MIPS64 && EXPERIMENTAL
564 select ARC
565 select ARC32
566 select BOOT_ELF32
567 select OWN_DMA
568 select DMA_IP32
569 select DMA_NONCOHERENT
570 select HW_HAS_PCI
571 select R5000_CPU_SCACHE
572 select RM7000_CPU_SCACHE
573 help
574 If you want this kernel to run on SGI O2 workstation, say Y here.
575
576config SOC_AU1X00
577 depends on MIPS32
578 bool "Support for AMD/Alchemy Au1X00 SOCs"
579
580choice
581 prompt "Au1X00 SOC Type"
582 depends on SOC_AU1X00
583 help
584 Say Y here to enable support for one of three AMD/Alchemy
585 SOCs. For additional documentation see www.amd.com.
586
587config SOC_AU1000
588 bool "SOC_AU1000"
589config SOC_AU1100
590 bool "SOC_AU1100"
591config SOC_AU1500
592 bool "SOC_AU1500"
593config SOC_AU1550
594 bool "SOC_AU1550"
595
596endchoice
597
598choice
599 prompt "AMD/Alchemy Au1x00 board support"
600 depends on SOC_AU1X00
601 help
602 These are evaluation boards built by AMD/Alchemy to
603 showcase their Au1X00 Internet Edge Processors. The SOC design
604 is based on the MIPS32 architecture running at 266/400/500MHz
605 with many integrated peripherals. Further information can be
606 found at their website, <http://www.amd.com/>. Say Y here if you
607 wish to build a kernel for this platform.
608
609config MIPS_PB1000
610 bool "PB1000 board"
611 depends on SOC_AU1000
612 select DMA_NONCOHERENT
613 select HW_HAS_PCI
614 select SWAP_IO_SPACE
615
616config MIPS_PB1100
617 bool "PB1100 board"
618 depends on SOC_AU1100
619 select DMA_NONCOHERENT
620 select HW_HAS_PCI
621 select SWAP_IO_SPACE
622
623config MIPS_PB1500
624 bool "PB1500 board"
625 depends on SOC_AU1500
626 select DMA_COHERENT
627 select HW_HAS_PCI
628
629config MIPS_PB1550
630 bool "PB1550 board"
631 depends on SOC_AU1550
632 select DMA_COHERENT
633 select HW_HAS_PCI
634 select MIPS_DISABLE_OBSOLETE_IDE
635
636config MIPS_DB1000
637 bool "DB1000 board"
638 depends on SOC_AU1000
639 select DMA_NONCOHERENT
640 select HW_HAS_PCI
641
642config MIPS_DB1100
643 bool "DB1100 board"
644 depends on SOC_AU1100
645 select DMA_NONCOHERENT
646
647config MIPS_DB1500
648 bool "DB1500 board"
649 depends on SOC_AU1500
650 select DMA_COHERENT
651 select HW_HAS_PCI
652 select MIPS_DISABLE_OBSOLETE_IDE
653
654config MIPS_DB1550
655 bool "DB1550 board"
656 depends on SOC_AU1550
657 select HW_HAS_PCI
658 select DMA_COHERENT
659 select MIPS_DISABLE_OBSOLETE_IDE
660
661config MIPS_BOSPORUS
662 bool "Bosporus board"
663 depends on SOC_AU1500
664 select DMA_NONCOHERENT
665
666config MIPS_MIRAGE
667 bool "Mirage board"
668 depends on SOC_AU1500
669 select DMA_NONCOHERENT
670
671config MIPS_XXS1500
672 bool "MyCable XXS1500 board"
673 depends on SOC_AU1500
674 select DMA_NONCOHERENT
675
676config MIPS_MTX1
677 bool "4G Systems MTX-1 board"
678 depends on SOC_AU1500
679 select HW_HAS_PCI
680 select DMA_NONCOHERENT
681
682endchoice
683
684config SIBYTE_SB1xxx_SOC
685 bool "Support for Broadcom BCM1xxx SOCs (EXPERIMENTAL)"
686 depends on EXPERIMENTAL
687 select BOOT_ELF32
688 select DMA_COHERENT
689 select SWAP_IO_SPACE
690
691choice
692 prompt "BCM1xxx SOC-based board"
693 depends on SIBYTE_SB1xxx_SOC
694 default SIBYTE_SWARM
695 help
696 Enable support for boards based on the SiByte line of SOCs
697 from Broadcom. There are configurations for the known
698 evaluation boards, or you can choose "Other" and add your
699 own board support code.
700
701config SIBYTE_SWARM
702 bool "BCM91250A-SWARM"
703 select SIBYTE_SB1250
704
705config SIBYTE_SENTOSA
706 bool "BCM91250E-Sentosa"
707 select SIBYTE_SB1250
708
709config SIBYTE_RHONE
710 bool "BCM91125E-Rhone"
711 select SIBYTE_BCM1125H
712
713config SIBYTE_CARMEL
714 bool "BCM91120x-Carmel"
715 select SIBYTE_BCM1120
716
717config SIBYTE_PTSWARM
718 bool "BCM91250PT-PTSWARM"
719 select SIBYTE_SB1250
720
721config SIBYTE_LITTLESUR
722 bool "BCM91250C2-LittleSur"
723 select SIBYTE_SB1250
724
725config SIBYTE_CRHINE
726 bool "BCM91120C-CRhine"
727 select SIBYTE_BCM1120
728
729config SIBYTE_CRHONE
730 bool "BCM91125C-CRhone"
731 select SIBYTE_BCM1125
732
733config SIBYTE_UNKNOWN
734 bool "Other"
735
736endchoice
737
738config SIBYTE_BOARD
739 bool
740 depends on SIBYTE_SB1xxx_SOC && !SIBYTE_UNKNOWN
741 default y
742
743choice
744 prompt "BCM1xxx SOC Type"
745 depends on SIBYTE_UNKNOWN
746 default SIBYTE_UNK_BCM1250
747 help
748 Since you haven't chosen a known evaluation board from
749 Broadcom, you must explicitly pick the SOC this kernel is
750 targetted for.
751
752config SIBYTE_UNK_BCM1250
753 bool "BCM1250"
754 select SIBYTE_SB1250
755
756config SIBYTE_UNK_BCM1120
757 bool "BCM1120"
758 select SIBYTE_BCM1120
759
760config SIBYTE_UNK_BCM1125
761 bool "BCM1125"
762 select SIBYTE_BCM1125
763
764config SIBYTE_UNK_BCM1125H
765 bool "BCM1125H"
766 select SIBYTE_BCM1125H
767
768endchoice
769
770config SIBYTE_SB1250
771 bool
772 select HW_HAS_PCI
773
774config SIBYTE_BCM1120
775 bool
776 select SIBYTE_BCM112X
777
778config SIBYTE_BCM1125
779 bool
780 select HW_HAS_PCI
781 select SIBYTE_BCM112X
782
783config SIBYTE_BCM1125H
784 bool
785 select HW_HAS_PCI
786 select SIBYTE_BCM112X
787
788config SIBYTE_BCM112X
789 bool
790
791choice
792 prompt "SiByte SOC Stepping"
793 depends on SIBYTE_SB1xxx_SOC
794
795config CPU_SB1_PASS_1
796 bool "1250 Pass1"
797 depends on SIBYTE_SB1250
798 select CPU_HAS_PREFETCH
799
800config CPU_SB1_PASS_2_1250
801 bool "1250 An"
802 depends on SIBYTE_SB1250
803 select CPU_SB1_PASS_2
804 help
805 Also called BCM1250 Pass 2
806
807config CPU_SB1_PASS_2_2
808 bool "1250 Bn"
809 depends on SIBYTE_SB1250
810 select CPU_HAS_PREFETCH
811 help
812 Also called BCM1250 Pass 2.2
813
814config CPU_SB1_PASS_4
815 bool "1250 Cn"
816 depends on SIBYTE_SB1250
817 select CPU_HAS_PREFETCH
818 help
819 Also called BCM1250 Pass 3
820
821config CPU_SB1_PASS_2_112x
822 bool "112x Hybrid"
823 depends on SIBYTE_BCM112X
824 select CPU_SB1_PASS_2
825
826config CPU_SB1_PASS_3
827 bool "112x An"
828 depends on SIBYTE_BCM112X
829 select CPU_HAS_PREFETCH
830
831endchoice
832
833config CPU_SB1_PASS_2
834 bool
835
836config SIBYTE_HAS_LDT
837 bool
838 depends on PCI && (SIBYTE_SB1250 || SIBYTE_BCM1125H)
839 default y
840
841config SIMULATION
842 bool "Running under simulation"
843 depends on SIBYTE_SB1xxx_SOC
844 help
845 Build a kernel suitable for running under the GDB simulator.
846 Primarily adjusts the kernel's notion of time.
847
848config SIBYTE_CFE
849 bool "Booting from CFE"
850 depends on SIBYTE_SB1xxx_SOC
851 help
852 Make use of the CFE API for enumerating available memory,
853 controlling secondary CPUs, and possibly console output.
854
855config SIBYTE_CFE_CONSOLE
856 bool "Use firmware console"
857 depends on SIBYTE_CFE
858 help
859 Use the CFE API's console write routines during boot. Other console
860 options (VT console, sb1250 duart console, etc.) should not be
861 configured.
862
863config SIBYTE_STANDALONE
864 bool
865 depends on SIBYTE_SB1xxx_SOC && !SIBYTE_CFE
866 default y
867
868config SIBYTE_STANDALONE_RAM_SIZE
869 int "Memory size (in megabytes)"
870 depends on SIBYTE_STANDALONE
871 default "32"
872
873config SIBYTE_BUS_WATCHER
874 bool "Support for Bus Watcher statistics"
875 depends on SIBYTE_SB1xxx_SOC
876 help
877 Handle and keep statistics on the bus error interrupts (COR_ECC,
878 BAD_ECC, IO_BUS).
879
880config SIBYTE_BW_TRACE
881 bool "Capture bus trace before bus error"
882 depends on SIBYTE_BUS_WATCHER
883 help
884 Run a continuous bus trace, dumping the raw data as soon as
885 a ZBbus error is detected. Cannot work if ZBbus profiling
886 is turned on, and also will interfere with JTAG-based trace
887 buffer activity. Raw buffer data is dumped to console, and
888 must be processed off-line.
889
890config SIBYTE_SB1250_PROF
891 bool "Support for SB1/SOC profiling - SB1/SCD perf counters"
892 depends on SIBYTE_SB1xxx_SOC
893
894config SIBYTE_TBPROF
895 bool "Support for ZBbus profiling"
896 depends on SIBYTE_SB1xxx_SOC
897
898config SNI_RM200_PCI
899 bool "Support for SNI RM200 PCI"
900 select ARC
901 select ARC32
902 select BOOT_ELF32
903 select DMA_NONCOHERENT
904 select GENERIC_ISA_DMA
905 select HAVE_STD_PC_SERIAL_PORT
906 select HW_HAS_PCI
907 select I8259
908 select ISA
909 help
910 The SNI RM200 PCI was a MIPS-based platform manufactured by Siemens
911 Nixdorf Informationssysteme (SNI), parent company of Pyramid
912 Technology and now in turn merged with Fujitsu. Say Y here to
913 support this machine type.
914
915config TOSHIBA_RBTX4927
916 bool "Support for Toshiba TBTX49[23]7 board"
917 depends on MIPS32
918 select DMA_NONCOHERENT
919 select HAS_TXX9_SERIAL
920 select HW_HAS_PCI
921 select I8259
922 select ISA
923 select SWAP_IO_SPACE
924 help
925 This Toshiba board is based on the TX4927 processor. Say Y here to
926 support this machine type
927
928config TOSHIBA_FPCIB0
929 bool "FPCIB0 Backplane Support"
930 depends on TOSHIBA_RBTX4927
931
932config RWSEM_GENERIC_SPINLOCK
933 bool
934 default y
935
936config RWSEM_XCHGADD_ALGORITHM
937 bool
938
939config GENERIC_CALIBRATE_DELAY
940 bool
941 default y
942
943config HAVE_DEC_LOCK
944 bool
945 default y
946
947#
948# Select some configuration options automatically based on user selections.
949#
950config ARC
951 bool
952 depends on SNI_RM200_PCI || SGI_IP32 || SGI_IP27 || SGI_IP22 || MIPS_MAGNUM_4000 || OLIVETTI_M700 || ACER_PICA_61
953 default y
954
955config DMA_COHERENT
956 bool
957
958config DMA_IP27
959 bool
960
961config DMA_NONCOHERENT
962 bool
963
964config EARLY_PRINTK
965 bool
966 depends on MACH_DECSTATION
967 default y
968
969config GENERIC_ISA_DMA
970 bool
971 depends on SNI_RM200_PCI || MIPS_MAGNUM_4000 || OLIVETTI_M700 || ACER_PICA_61 || MIPS_MALTA
972 default y
973
974config I8259
975 bool
976 depends on SNI_RM200_PCI || DDB5477 || DDB5476 || DDB5074 || MACH_JAZZ || MIPS_MALTA || MIPS_COBALT
977 default y
978
979config LIMITED_DMA
980 bool
981 select HIGHMEM
982
983config MIPS_BONITO64
984 bool
985 depends on MIPS_ATLAS || MIPS_MALTA
986 default y
987
988config MIPS_MSC
989 bool
990 depends on MIPS_ATLAS || MIPS_MALTA
991 default y
992
993config MIPS_NILE4
994 bool
995 depends on LASAT
996 default y
997
998config MIPS_DISABLE_OBSOLETE_IDE
999 bool
1000
1001config CPU_LITTLE_ENDIAN
1002 bool "Generate little endian code"
Adrian Bunkab1418a2005-09-03 15:56:07 -07001003 default y if ACER_PICA_61 || CASIO_E55 || DDB5074 || DDB5476 || DDB5477 || MACH_DECSTATION || IBM_WORKPAD || LASAT || MIPS_COBALT || MIPS_ITE8172 || MIPS_IVR || SOC_AU1X00 || OLIVETTI_M700 || SNI_RM200_PCI || VICTOR_MPC30X || ZAO_CAPCELLA
Linus Torvalds1da177e2005-04-16 15:20:36 -07001004 default n if MIPS_EV64120 || MIPS_EV96100 || MOMENCO_OCELOT || MOMENCO_OCELOT_G || SGI_IP22 || SGI_IP27 || SGI_IP32 || TOSHIBA_JMR3927
1005 help
1006 Some MIPS machines can be configured for either little or big endian
1007 byte order. These modes require different kernels. Say Y if your
1008 machine is little endian, N if it's a big endian machine.
1009
1010config IRQ_CPU
1011 bool
1012
1013config IRQ_CPU_RM7K
1014 bool
1015
1016config IRQ_MV64340
1017 bool
1018
1019config DDB5XXX_COMMON
1020 bool
1021 depends on DDB5074 || DDB5476 || DDB5477
1022 default y
1023
1024config MIPS_BOARDS_GEN
1025 bool
1026 depends on MIPS_ATLAS || MIPS_MALTA || MIPS_SEAD
1027 default y
1028
1029config MIPS_GT64111
1030 bool
1031 depends on MIPS_COBALT
1032 default y
1033
1034config MIPS_GT64120
1035 bool
1036 depends on MIPS_EV64120 || MIPS_EV96100 || LASAT || MIPS_ATLAS || MIPS_MALTA || MOMENCO_OCELOT
1037 default y
1038
1039config MIPS_TX3927
1040 bool
1041 depends on TOSHIBA_JMR3927
1042 select HAS_TXX9_SERIAL
1043 default y
1044
1045config PCI_MARVELL
1046 bool
1047
1048config ITE_BOARD_GEN
1049 bool
1050 depends on MIPS_IVR || MIPS_ITE8172
1051 default y
1052
1053config SWAP_IO_SPACE
1054 bool
1055
1056#
1057# Unfortunately not all GT64120 systems run the chip at the same clock.
1058# As the user for the clock rate and try to minimize the available options.
1059#
1060choice
1061 prompt "Galileo Chip Clock"
1062 #default SYSCLK_83 if MIPS_EV64120
1063 depends on MIPS_EV64120 || MOMENCO_OCELOT || MOMENCO_OCELOT_G
1064 default SYSCLK_83 if MIPS_EV64120
1065 default SYSCLK_100 if MOMENCO_OCELOT || MOMENCO_OCELOT_G
1066
1067config SYSCLK_75
1068 bool "75" if MIPS_EV64120
1069
1070config SYSCLK_83
1071 bool "83.3" if MIPS_EV64120
1072
1073config SYSCLK_100
1074 bool "100" if MIPS_EV64120 || MOMENCO_OCELOT || MOMENCO_OCELOT_G
1075
1076endchoice
1077
1078config AU1X00_USB_DEVICE
1079 bool
1080 depends on MIPS_PB1500 || MIPS_PB1100 || MIPS_PB1000
1081 default n
1082
1083config MIPS_GT96100
1084 bool
1085 depends on MIPS_EV96100
1086 default y
1087 help
1088 Say Y here to support the Galileo Technology GT96100 communications
1089 controller card. There is a web page at <http://www.galileot.com/>.
1090
1091config IT8172_CIR
1092 bool
1093 depends on MIPS_ITE8172 || MIPS_IVR
1094 default y
1095
1096config IT8712
1097 bool
1098 depends on MIPS_ITE8172
1099 default y
1100
1101config BOOT_ELF32
1102 bool
1103 depends on MACH_DECSTATION || MIPS_ATLAS || MIPS_MALTA || MOMENCO_JAGUAR_ATX || MOMENCO_OCELOT_3 || SIBYTE_SB1xxx_SOC || SGI_IP32 || SGI_IP22 || SNI_RM200_PCI
1104 default y
1105
1106config MIPS_L1_CACHE_SHIFT
1107 int
1108 default "4" if MACH_DECSTATION
1109 default "7" if SGI_IP27
1110 default "5"
1111
1112config ARC32
1113 bool
1114 depends on MACH_JAZZ || SNI_RM200_PCI || SGI_IP22 || SGI_IP32
1115 default y
1116
Linus Torvalds1da177e2005-04-16 15:20:36 -07001117config HAVE_STD_PC_SERIAL_PORT
1118 bool
1119
Linus Torvalds1da177e2005-04-16 15:20:36 -07001120config ARC_CONSOLE
1121 bool "ARC console support"
1122 depends on SGI_IP22 || SNI_RM200_PCI
1123
1124config ARC_MEMORY
1125 bool
1126 depends on MACH_JAZZ || SNI_RM200_PCI || SGI_IP32
1127 default y
1128
1129config ARC_PROMLIB
1130 bool
1131 depends on MACH_JAZZ || SNI_RM200_PCI || SGI_IP22 || SGI_IP32
1132 default y
1133
1134config ARC64
1135 bool
1136 depends on SGI_IP27
1137 default y
1138
1139config BOOT_ELF64
1140 bool
1141 depends on SGI_IP27
1142 default y
1143
1144#config MAPPED_PCI_IO y
1145# bool
1146# depends on SGI_IP27
1147# default y
1148
1149config QL_ISP_A64
1150 bool
1151 depends on SGI_IP27
1152 default y
1153
1154config TOSHIBA_BOARDS
1155 bool
1156 depends on TOSHIBA_JMR3927 || TOSHIBA_RBTX4927
1157 default y
1158
1159endmenu
1160
1161menu "CPU selection"
1162
1163choice
1164 prompt "CPU type"
1165 default CPU_R4X00
1166
1167config CPU_MIPS32
1168 bool "MIPS32"
1169
1170config CPU_MIPS64
1171 bool "MIPS64"
1172
1173config CPU_R3000
1174 bool "R3000"
1175 depends on MIPS32
1176 help
1177 Please make sure to pick the right CPU type. Linux/MIPS is not
1178 designed to be generic, i.e. Kernels compiled for R3000 CPUs will
1179 *not* work on R4000 machines and vice versa. However, since most
1180 of the supported machines have an R4000 (or similar) CPU, R4x00
1181 might be a safe bet. If the resulting kernel does not work,
1182 try to recompile with R3000.
1183
1184config CPU_TX39XX
1185 bool "R39XX"
1186 depends on MIPS32
1187
1188config CPU_VR41XX
1189 bool "R41xx"
1190 help
1191 The options selects support for the NEC VR41xx series of processors.
1192 Only choose this option if you have one of these processors as a
1193 kernel built with this option will not run on any other type of
1194 processor or vice versa.
1195
1196config CPU_R4300
1197 bool "R4300"
1198 help
1199 MIPS Technologies R4300-series processors.
1200
1201config CPU_R4X00
1202 bool "R4x00"
1203 help
1204 MIPS Technologies R4000-series processors other than 4300, including
1205 the R4000, R4400, R4600, and 4700.
1206
1207config CPU_TX49XX
1208 bool "R49XX"
1209
1210config CPU_R5000
1211 bool "R5000"
1212 help
1213 MIPS Technologies R5000-series processors other than the Nevada.
1214
1215config CPU_R5432
1216 bool "R5432"
1217
1218config CPU_R6000
1219 bool "R6000"
1220 depends on MIPS32 && EXPERIMENTAL
1221 help
1222 MIPS Technologies R6000 and R6000A series processors. Note these
1223 processors are extremly rare and the support for them is incomplete.
1224
1225config CPU_NEVADA
1226 bool "RM52xx"
1227 help
1228 QED / PMC-Sierra RM52xx-series ("Nevada") processors.
1229
1230config CPU_R8000
1231 bool "R8000"
1232 depends on MIPS64 && EXPERIMENTAL
1233 help
1234 MIPS Technologies R8000 processors. Note these processors are
1235 uncommon and the support for them is incomplete.
1236
1237config CPU_R10000
1238 bool "R10000"
1239 help
1240 MIPS Technologies R10000-series processors.
1241
1242config CPU_RM7000
1243 bool "RM7000"
1244
1245config CPU_RM9000
1246 bool "RM9000"
1247
1248config CPU_SB1
1249 bool "SB1"
1250
1251endchoice
1252
1253choice
1254 prompt "Kernel page size"
1255 default PAGE_SIZE_4KB
1256
1257config PAGE_SIZE_4KB
1258 bool "4kB"
1259 help
1260 This option select the standard 4kB Linux page size. On some
1261 R3000-family processors this is the only available page size. Using
1262 4kB page size will minimize memory consumption and is therefore
1263 recommended for low memory systems.
1264
1265config PAGE_SIZE_8KB
1266 bool "8kB"
1267 depends on EXPERIMENTAL && CPU_R8000
1268 help
1269 Using 8kB page size will result in higher performance kernel at
1270 the price of higher memory consumption. This option is available
1271 only on the R8000 processor. Not that at the time of this writing
1272 this option is still high experimental; there are also issues with
1273 compatibility of user applications.
1274
1275config PAGE_SIZE_16KB
1276 bool "16kB"
1277 depends on EXPERIMENTAL && !CPU_R3000 && !CPU_TX39XX
1278 help
1279 Using 16kB page size will result in higher performance kernel at
1280 the price of higher memory consumption. This option is available on
1281 all non-R3000 family processor. Not that at the time of this
1282 writing this option is still high experimental; there are also
1283 issues with compatibility of user applications.
1284
1285config PAGE_SIZE_64KB
1286 bool "64kB"
1287 depends on EXPERIMENTAL && !CPU_R3000 && !CPU_TX39XX
1288 help
1289 Using 64kB page size will result in higher performance kernel at
1290 the price of higher memory consumption. This option is available on
1291 all non-R3000 family processor. Not that at the time of this
1292 writing this option is still high experimental; there are also
1293 issues with compatibility of user applications.
1294
1295endchoice
1296
1297config BOARD_SCACHE
1298 bool
1299
1300config IP22_CPU_SCACHE
1301 bool
1302 select BOARD_SCACHE
1303
1304config R5000_CPU_SCACHE
1305 bool
1306 select BOARD_SCACHE
1307
1308config RM7000_CPU_SCACHE
1309 bool
1310 select BOARD_SCACHE
1311
1312config SIBYTE_DMA_PAGEOPS
1313 bool "Use DMA to clear/copy pages"
1314 depends on CPU_SB1
1315 help
1316 Instead of using the CPU to zero and copy pages, use a Data Mover
1317 channel. These DMA channels are otherwise unused by the standard
1318 SiByte Linux port. Seems to give a small performance benefit.
1319
1320config CPU_HAS_PREFETCH
1321 bool "Enable prefetches" if CPU_SB1 && !CPU_SB1_PASS_2
1322 default y if CPU_MIPS32 || CPU_MIPS64 || CPU_RM7000 || CPU_RM9000 || CPU_R10000
1323
1324config VTAG_ICACHE
1325 bool "Support for Virtual Tagged I-cache" if CPU_MIPS64 || CPU_MIPS32
1326 default y if CPU_SB1
1327
1328config SB1_PASS_1_WORKAROUNDS
1329 bool
1330 depends on CPU_SB1_PASS_1
1331 default y
1332
1333config SB1_PASS_2_WORKAROUNDS
1334 bool
1335 depends on CPU_SB1 && (CPU_SB1_PASS_2_2 || CPU_SB1_PASS_2)
1336 default y
1337
1338config SB1_PASS_2_1_WORKAROUNDS
1339 bool
1340 depends on CPU_SB1 && CPU_SB1_PASS_2
1341 default y
1342
1343config 64BIT_PHYS_ADDR
1344 bool "Support for 64-bit physical address space"
1345 depends on (CPU_R4X00 || CPU_R5000 || CPU_RM7000 || CPU_RM9000 || CPU_R10000 || CPU_SB1 || CPU_MIPS32 || CPU_MIPS64) && MIPS32
1346
1347config CPU_ADVANCED
1348 bool "Override CPU Options"
1349 depends on MIPS32
1350 help
1351 Saying yes here allows you to select support for various features
1352 your CPU may or may not have. Most people should say N here.
1353
1354config CPU_HAS_LLSC
1355 bool "ll/sc Instructions available" if CPU_ADVANCED
1356 default y if !CPU_ADVANCED && !CPU_R3000 && !CPU_VR41XX && !CPU_TX39XX
1357 help
1358 MIPS R4000 series and later provide the Load Linked (ll)
1359 and Store Conditional (sc) instructions. More information is
1360 available at <http://www.go-ecs.com/mips/miptek1.htm>.
1361
1362 Say Y here if your CPU has the ll and sc instructions. Say Y here
1363 for better performance, N if you don't know. You must say Y here
1364 for multiprocessor machines.
1365
1366config CPU_HAS_LLDSCD
1367 bool "lld/scd Instructions available" if CPU_ADVANCED
1368 default y if !CPU_ADVANCED && !CPU_R3000 && !CPU_VR41XX && !CPU_TX39XX && !CPU_MIPS32
1369 help
1370 Say Y here if your CPU has the lld and scd instructions, the 64-bit
1371 equivalents of ll and sc. Say Y here for better performance, N if
1372 you don't know. You must say Y here for multiprocessor machines.
1373
1374config CPU_HAS_WB
1375 bool "Writeback Buffer available" if CPU_ADVANCED
1376 default y if !CPU_ADVANCED && CPU_R3000 && MACH_DECSTATION
1377 help
1378 Say N here for slightly better performance. You must say Y here for
1379 machines which require flushing of write buffers in software. Saying
1380 Y is the safe option; N may result in kernel malfunction and crashes.
1381
1382config CPU_HAS_SYNC
1383 bool
1384 depends on !CPU_R3000
1385 default y
1386
1387#
1388# - Highmem only makes sense for the 32-bit kernel.
1389# - The current highmem code will only work properly on physically indexed
1390# caches such as R3000, SB1, R7000 or those that look like they're virtually
1391# indexed such as R4000/R4400 SC and MC versions or R10000. So for the
1392# moment we protect the user and offer the highmem option only on machines
1393# where it's known to be safe. This will not offer highmem on a few systems
1394# such as MIPS32 and MIPS64 CPUs which may have virtual and physically
1395# indexed CPUs but we're playing safe.
1396# - We should not offer highmem for system of which we already know that they
1397# don't have memory configurations that could gain from highmem support in
1398# the kernel because they don't support configurations with RAM at physical
1399# addresses > 0x20000000.
1400#
1401config HIGHMEM
1402 bool "High Memory Support"
1403 depends on MIPS32 && (CPU_R3000 || CPU_SB1 || CPU_R7000 || CPU_RM9000 || CPU_R10000) && !(MACH_DECSTATION || MOMENCO_JAGUAR_ATX)
1404
Yoichi Yuasab4819b52005-06-25 14:54:31 -07001405config ARCH_FLATMEM_ENABLE
1406 def_bool y
1407 depends on !NUMA
1408
1409source "mm/Kconfig"
1410
Linus Torvalds1da177e2005-04-16 15:20:36 -07001411config SMP
1412 bool "Multi-Processing support"
1413 depends on CPU_RM9000 || (SIBYTE_SB1250 && !SIBYTE_STANDALONE) || SGI_IP27
1414 ---help---
1415 This enables support for systems with more than one CPU. If you have
1416 a system with only one CPU, like most personal computers, say N. If
1417 you have a system with more than one CPU, say Y.
1418
1419 If you say N here, the kernel will run on single and multiprocessor
1420 machines, but will use only one CPU of a multiprocessor machine. If
1421 you say Y here, the kernel will run on many, but not all,
1422 singleprocessor machines. On a singleprocessor machine, the kernel
1423 will run faster if you say N here.
1424
1425 People using multiprocessor machines who say Y here should also say
1426 Y to "Enhanced Real Time Clock Support", below.
1427
1428 See also the <file:Documentation/smp.txt> and the SMP-HOWTO
1429 available at <http://www.tldp.org/docs.html#howto>.
1430
1431 If you don't know what to do here, say N.
1432
1433config NR_CPUS
1434 int "Maximum number of CPUs (2-64)"
1435 range 2 64
1436 depends on SMP
1437 default "64" if SGI_IP27
1438 default "2"
1439 help
1440 This allows you to specify the maximum number of CPUs which this
1441 kernel will support. The maximum supported value is 32 for 32-bit
1442 kernel and 64 for 64-bit kernels; the minimum value which makes
1443 sense is 2.
1444
1445 This is purely to save memory - each supported CPU adds
1446 approximately eight kilobytes to the kernel image.
1447
1448config PREEMPT
1449 bool "Preemptible Kernel"
1450 help
1451 This option reduces the latency of the kernel when reacting to
1452 real-time or interactive events by allowing a low priority process to
1453 be preempted even if it is in kernel mode executing a system call.
1454 This allows applications to run more reliably even when the system is
1455 under load.
1456
1457config RTC_DS1742
1458 bool "DS1742 BRAM/RTC support"
1459 depends on TOSHIBA_JMR3927 || TOSHIBA_RBTX4927
1460
1461config MIPS_INSANE_LARGE
1462 bool "Support for large 64-bit configurations"
1463 depends on CPU_R10000 && MIPS64
1464 help
1465 MIPS R10000 does support a 44 bit / 16TB address space as opposed to
1466 previous 64-bit processors which only supported 40 bit / 1TB. If you
1467 need processes of more than 1TB virtual address space, say Y here.
1468 This will result in additional memory usage, so it is not
1469 recommended for normal users.
1470
1471config RWSEM_GENERIC_SPINLOCK
1472 bool
1473 default y
1474
1475endmenu
1476
1477menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)"
1478
1479config HW_HAS_PCI
1480 bool
1481
1482config PCI
1483 bool "Support for PCI controller"
1484 depends on HW_HAS_PCI
1485 help
1486 Find out whether you have a PCI motherboard. PCI is the name of a
1487 bus system, i.e. the way the CPU talks to the other stuff inside
1488 your box. Other bus systems are ISA, EISA, or VESA. If you have PCI,
1489 say Y, otherwise N.
1490
1491 The PCI-HOWTO, available from
1492 <http://www.tldp.org/docs.html#howto>, contains valuable
1493 information about which PCI hardware does work under Linux and which
1494 doesn't.
1495
1496config PCI_DOMAINS
1497 bool
1498 depends on PCI
1499
1500source "drivers/pci/Kconfig"
1501
1502#
1503# ISA support is now enabled via select. Too many systems still have the one
1504# or other ISA chip on the board that users don't know about so don't expect
1505# users to choose the right thing ...
1506#
1507config ISA
1508 bool
1509
1510config EISA
1511 bool "EISA support"
1512 depends on SGI_IP22 || SNI_RM200_PCI
1513 select ISA
1514 ---help---
1515 The Extended Industry Standard Architecture (EISA) bus was
1516 developed as an open alternative to the IBM MicroChannel bus.
1517
1518 The EISA bus provided some of the features of the IBM MicroChannel
1519 bus while maintaining backward compatibility with cards made for
1520 the older ISA bus. The EISA bus saw limited use between 1988 and
1521 1995 when it was made obsolete by the PCI bus.
1522
1523 Say Y here if you are building a kernel for an EISA-based machine.
1524
1525 Otherwise, say N.
1526
1527source "drivers/eisa/Kconfig"
1528
1529config TC
1530 bool "TURBOchannel support"
1531 depends on MACH_DECSTATION
1532 help
1533 TurboChannel is a DEC (now Compaq (now HP)) bus for Alpha and MIPS
1534 processors. Documentation on writing device drivers for TurboChannel
1535 is available at:
1536 <http://www.cs.arizona.edu/computer.help/policy/DIGITAL_unix/AA-PS3HD-TET1_html/TITLE.html>.
1537
1538#config ACCESSBUS
1539# bool "Access.Bus support"
1540# depends on TC
1541
1542config MMU
1543 bool
1544 default y
1545
1546config MCA
1547 bool
1548
1549config SBUS
1550 bool
1551
1552source "drivers/pcmcia/Kconfig"
1553
1554source "drivers/pci/hotplug/Kconfig"
1555
1556endmenu
1557
1558menu "Executable file formats"
1559
1560source "fs/Kconfig.binfmt"
1561
1562config TRAD_SIGNALS
1563 bool
1564 default y if MIPS32
1565
1566config BUILD_ELF64
1567 bool "Use 64-bit ELF format for building"
1568 depends on MIPS64
1569 help
1570 A 64-bit kernel is usually built using the 64-bit ELF binary object
1571 format as it's one that allows arbitrary 64-bit constructs. For
1572 kernels that are loaded within the KSEG compatibility segments the
1573 32-bit ELF format can optionally be used resulting in a somewhat
1574 smaller binary, but this option is not explicitly supported by the
1575 toolchain and since binutils 2.14 it does not even work at all.
1576
1577 Say Y to use the 64-bit format or N to use the 32-bit one.
1578
1579 If unsure say Y.
1580
1581config BINFMT_IRIX
1582 bool "Include IRIX binary compatibility"
1583 depends on !CPU_LITTLE_ENDIAN && MIPS32 && BROKEN
1584
1585config MIPS32_COMPAT
1586 bool "Kernel support for Linux/MIPS 32-bit binary compatibility"
1587 depends on MIPS64
1588 help
1589 Select this option if you want Linux/MIPS 32-bit binary
1590 compatibility. Since all software available for Linux/MIPS is
1591 currently 32-bit you should say Y here.
1592
1593config COMPAT
1594 bool
1595 depends on MIPS32_COMPAT
1596 default y
1597
1598config MIPS32_O32
1599 bool "Kernel support for o32 binaries"
1600 depends on MIPS32_COMPAT
1601 help
1602 Select this option if you want to run o32 binaries. These are pure
1603 32-bit binaries as used by the 32-bit Linux/MIPS port. Most of
1604 existing binaries are in this format.
1605
1606 If unsure, say Y.
1607
1608config MIPS32_N32
1609 bool "Kernel support for n32 binaries"
1610 depends on MIPS32_COMPAT
1611 help
1612 Select this option if you want to run n32 binaries. These are
1613 64-bit binaries using 32-bit quantities for addressing and certain
1614 data that would normally be 64-bit. They are used in special
1615 cases.
1616
1617 If unsure, say N.
1618
1619config BINFMT_ELF32
1620 bool
1621 default y if MIPS32_O32 || MIPS32_N32
1622
1623config PM
1624 bool "Power Management support (EXPERIMENTAL)"
1625 depends on EXPERIMENTAL && MACH_AU1X00
1626
1627endmenu
1628
Sam Ravnborgd5950b42005-07-11 21:03:49 -07001629source "net/Kconfig"
1630
Linus Torvalds1da177e2005-04-16 15:20:36 -07001631source "drivers/Kconfig"
1632
1633source "fs/Kconfig"
1634
1635source "arch/mips/Kconfig.debug"
1636
1637source "security/Kconfig"
1638
1639source "crypto/Kconfig"
1640
1641source "lib/Kconfig"
1642
1643#
1644# Use the generic interrupt handling code in kernel/irq/:
1645#
1646config GENERIC_HARDIRQS
1647 bool
1648 default y
1649
1650config GENERIC_IRQ_PROBE
1651 bool
1652 default y
Al Viro5cae8412005-05-04 05:39:22 +01001653
1654config ISA_DMA_API
1655 bool
1656 default y