blob: 96e3f56519e7d9831e4b4c4ce19f78afd436242f [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001#ifndef _SCSI_SCSI_DEVINFO_H
2#define _SCSI_SCSI_DEVINFO_H
3/*
4 * Flags for SCSI devices that need special treatment
5 */
6#define BLIST_NOLUN 0x001 /* Only scan LUN 0 */
7#define BLIST_FORCELUN 0x002 /* Known to have LUNs, force scanning,
8 deprecated: Use max_luns=N */
9#define BLIST_BORKEN 0x004 /* Flag for broken handshaking */
10#define BLIST_KEY 0x008 /* unlock by special command */
11#define BLIST_SINGLELUN 0x010 /* Do not use LUNs in parallel */
12#define BLIST_NOTQ 0x020 /* Buggy Tagged Command Queuing */
13#define BLIST_SPARSELUN 0x040 /* Non consecutive LUN numbering */
14#define BLIST_MAX5LUN 0x080 /* Avoid LUNS >= 5 */
15#define BLIST_ISROM 0x100 /* Treat as (removable) CD-ROM */
16#define BLIST_LARGELUN 0x200 /* LUNs past 7 on a SCSI-2 device */
17#define BLIST_INQUIRY_36 0x400 /* override additional length field */
18#define BLIST_INQUIRY_58 0x800 /* ... for broken inquiry responses */
19#define BLIST_NOSTARTONADD 0x1000 /* do not do automatic start on add */
20#define BLIST_MS_SKIP_PAGE_08 0x2000 /* do not send ms page 0x08 */
21#define BLIST_MS_SKIP_PAGE_3F 0x4000 /* do not send ms page 0x3f */
22#define BLIST_USE_10_BYTE_MS 0x8000 /* use 10 byte ms before 6 byte ms */
23#define BLIST_MS_192_BYTES_FOR_3F 0x10000 /* 192 byte ms page 0x3f request */
24#define BLIST_REPORTLUN2 0x20000 /* try REPORT_LUNS even for SCSI-2 devs
25 (if HBA supports more than 8 LUNs) */
26#define BLIST_NOREPORTLUN 0x40000 /* don't try REPORT_LUNS scan (SCSI-3 devs) */
27#define BLIST_NOT_LOCKABLE 0x80000 /* don't use PREVENT-ALLOW commands */
28#define BLIST_NO_ULD_ATTACH 0x100000 /* device is actually for RAID config */
29#define BLIST_SELECT_NO_ATN 0x200000 /* select without ATN */
30#define BLIST_RETRY_HWERROR 0x400000 /* retry HARDWARE_ERROR */
James Bottomley4d7db042006-03-31 20:07:45 -060031#define BLIST_MAX_512 0x800000 /* maximum 512 sector cdb length */
James Bottomley84d891d2006-04-14 15:47:45 -050032#define BLIST_ATTACH_PQ3 0x1000000 /* Scan: Attach to PQ3 devices */
Martin K. Petersend974e422012-08-28 14:29:35 -040033#define BLIST_NO_DIF 0x2000000 /* Disable T10 PI (DIF) */
Martin K. Petersen56f2a802013-04-24 21:19:47 -040034#define BLIST_SKIP_VPD_PAGES 0x4000000 /* Ignore SBC-3 VPD pages */
Hannes Reinecke22ffeb42014-06-03 10:58:53 +020035#define BLIST_SCSI3LUN 0x8000000 /* Scan more than 256 LUNs
36 for sequential scan */
Martin K. Petersenc1d40a52014-07-15 12:49:17 -040037#define BLIST_TRY_VPD_PAGES 0x10000000 /* Attempt to read VPD pages */
Janusz Dziemidowicz02134362014-07-24 15:48:46 +020038#define BLIST_NO_RSOC 0x20000000 /* don't try to issue RSOC */
Mike Christie35e9a9f2015-04-20 22:42:24 -050039#define BLIST_MAX_1024 0x40000000 /* maximum 1024 sector cdb length */
Janusz Dziemidowicz02134362014-07-24 15:48:46 +020040
Linus Torvalds1da177e2005-04-16 15:20:36 -070041#endif