blob: 524b371f9397ae2bff5eb527614666c866f31343 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * Copyright (C) 1992-1997, 2000-2003 Silicon Graphics, Inc.
3 * Copyright (C) 2004 Christoph Hellwig.
4 * Released under GPL v2.
5 *
6 * Support functions for the HUB ASIC - mostly PIO mapping related.
7 */
8
9#include <linux/bitops.h>
10#include <linux/string.h>
11#include <linux/mmzone.h>
12#include <asm/sn/addrs.h>
13#include <asm/sn/arch.h>
14#include <asm/sn/hub.h>
15
16
17static int force_fire_and_forget = 1;
18
19/**
20 * hub_pio_map - establish a HUB PIO mapping
21 *
22 * @hub: hub to perform PIO mapping on
23 * @widget: widget ID to perform PIO mapping for
24 * @xtalk_addr: xtalk_address that needs to be mapped
25 * @size: size of the PIO mapping
26 *
27 **/
28unsigned long hub_pio_map(cnodeid_t cnode, xwidgetnum_t widget,
29 unsigned long xtalk_addr, size_t size)
30{
31 nasid_t nasid = COMPACT_TO_NASID_NODEID(cnode);
32 volatile hubreg_t junk;
33 unsigned i;
34
35 /* use small-window mapping if possible */
36 if ((xtalk_addr % SWIN_SIZE) + size <= SWIN_SIZE)
37 return NODE_SWIN_BASE(nasid, widget) + (xtalk_addr % SWIN_SIZE);
38
39 if ((xtalk_addr % BWIN_SIZE) + size > BWIN_SIZE) {
40 printk(KERN_WARNING "PIO mapping at hub %d widget %d addr 0x%lx"
41 " too big (%ld)\n",
42 nasid, widget, xtalk_addr, size);
43 return 0;
44 }
45
46 xtalk_addr &= ~(BWIN_SIZE-1);
47 for (i = 0; i < HUB_NUM_BIG_WINDOW; i++) {
48 if (test_and_set_bit(i, hub_data(cnode)->h_bigwin_used))
49 continue;
50
51 /*
52 * The code below does a PIO write to setup an ITTE entry.
53 *
54 * We need to prevent other CPUs from seeing our updated
55 * memory shadow of the ITTE (in the piomap) until the ITTE
56 * entry is actually set up; otherwise, another CPU might
57 * attempt a PIO prematurely.
58 *
59 * Also, the only way we can know that an entry has been
60 * received by the hub and can be used by future PIO reads/
61 * writes is by reading back the ITTE entry after writing it.
62 *
63 * For these two reasons, we PIO read back the ITTE entry
64 * after we write it.
65 */
66 IIO_ITTE_PUT(nasid, i, HUB_PIO_MAP_TO_MEM, widget, xtalk_addr);
67 junk = HUB_L(IIO_ITTE_GET(nasid, i));
68
69 return NODE_BWIN_BASE(nasid, widget) + (xtalk_addr % BWIN_SIZE);
70 }
71
72 printk(KERN_WARNING "unable to establish PIO mapping for at"
73 " hub %d widget %d addr 0x%lx\n",
74 nasid, widget, xtalk_addr);
75 return 0;
76}
77
78
79/*
80 * hub_setup_prb(nasid, prbnum, credits, conveyor)
81 *
82 * Put a PRB into fire-and-forget mode if conveyor isn't set. Otherwise,
83 * put it into conveyor belt mode with the specified number of credits.
84 */
85static void hub_setup_prb(nasid_t nasid, int prbnum, int credits)
86{
87 iprb_t prb;
88 int prb_offset;
89
90 /*
91 * Get the current register value.
92 */
93 prb_offset = IIO_IOPRB(prbnum);
94 prb.iprb_regval = REMOTE_HUB_L(nasid, prb_offset);
95
96 /*
97 * Clear out some fields.
98 */
99 prb.iprb_ovflow = 1;
100 prb.iprb_bnakctr = 0;
101 prb.iprb_anakctr = 0;
102
103 /*
104 * Enable or disable fire-and-forget mode.
105 */
106 prb.iprb_ff = force_fire_and_forget ? 1 : 0;
107
108 /*
109 * Set the appropriate number of PIO cresits for the widget.
110 */
111 prb.iprb_xtalkctr = credits;
112
113 /*
114 * Store the new value to the register.
115 */
116 REMOTE_HUB_S(nasid, prb_offset, prb.iprb_regval);
117}
118
119/**
120 * hub_set_piomode - set pio mode for a given hub
121 *
122 * @nasid: physical node ID for the hub in question
123 *
124 * Put the hub into either "PIO conveyor belt" mode or "fire-and-forget" mode.
125 * To do this, we have to make absolutely sure that no PIOs are in progress
126 * so we turn off access to all widgets for the duration of the function.
127 *
128 * XXX - This code should really check what kind of widget we're talking
129 * to. Bridges can only handle three requests, but XG will do more.
130 * How many can crossbow handle to widget 0? We're assuming 1.
131 *
132 * XXX - There is a bug in the crossbow that link reset PIOs do not
133 * return write responses. The easiest solution to this problem is to
134 * leave widget 0 (xbow) in fire-and-forget mode at all times. This
135 * only affects pio's to xbow registers, which should be rare.
136 **/
137static void hub_set_piomode(nasid_t nasid)
138{
139 hubreg_t ii_iowa;
140 hubii_wcr_t ii_wcr;
141 unsigned i;
142
143 ii_iowa = REMOTE_HUB_L(nasid, IIO_OUTWIDGET_ACCESS);
144 REMOTE_HUB_S(nasid, IIO_OUTWIDGET_ACCESS, 0);
145
146 ii_wcr.wcr_reg_value = REMOTE_HUB_L(nasid, IIO_WCR);
147
148 if (ii_wcr.iwcr_dir_con) {
149 /*
150 * Assume a bridge here.
151 */
152 hub_setup_prb(nasid, 0, 3);
153 } else {
154 /*
155 * Assume a crossbow here.
156 */
157 hub_setup_prb(nasid, 0, 1);
158 }
159
160 /*
161 * XXX - Here's where we should take the widget type into
162 * when account assigning credits.
163 */
164 for (i = HUB_WIDGET_ID_MIN; i <= HUB_WIDGET_ID_MAX; i++)
165 hub_setup_prb(nasid, i, 3);
166
167 REMOTE_HUB_S(nasid, IIO_OUTWIDGET_ACCESS, ii_iowa);
168}
169
170/*
171 * hub_pio_init - PIO-related hub initalization
172 *
173 * @hub: hubinfo structure for our hub
174 */
175void hub_pio_init(cnodeid_t cnode)
176{
177 nasid_t nasid = COMPACT_TO_NASID_NODEID(cnode);
178 unsigned i;
179
180 /* initialize big window piomaps for this hub */
181 bitmap_zero(hub_data(cnode)->h_bigwin_used, HUB_NUM_BIG_WINDOW);
182 for (i = 0; i < HUB_NUM_BIG_WINDOW; i++)
183 IIO_ITTE_DISABLE(nasid, i);
184
185 hub_set_piomode(nasid);
186}