blob: aab9b492c627ada109f4cb5ac9840b5b79cdf2f6 [file] [log] [blame]
Ranjit Waghmodedfe11a12015-06-10 16:08:21 +05301/*
2 * Xilinx Zynq UltraScale+ MPSoC Quad-SPI (QSPI) controller driver
3 * (master mode only)
4 *
5 * Copyright (C) 2009 - 2015 Xilinx, Inc.
6 *
7 * This program is free software; you can redistribute it and/or modify it
8 * under the terms of the GNU General Public License version 2 as published
9 * by the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
11 */
12
13#include <linux/clk.h>
14#include <linux/delay.h>
15#include <linux/dma-mapping.h>
16#include <linux/dmaengine.h>
17#include <linux/interrupt.h>
18#include <linux/io.h>
19#include <linux/module.h>
20#include <linux/of_irq.h>
21#include <linux/of_address.h>
22#include <linux/platform_device.h>
23#include <linux/spi/spi.h>
24#include <linux/spinlock.h>
25#include <linux/workqueue.h>
26
27/* Generic QSPI register offsets */
28#define GQSPI_CONFIG_OFST 0x00000100
29#define GQSPI_ISR_OFST 0x00000104
30#define GQSPI_IDR_OFST 0x0000010C
31#define GQSPI_IER_OFST 0x00000108
32#define GQSPI_IMASK_OFST 0x00000110
33#define GQSPI_EN_OFST 0x00000114
34#define GQSPI_TXD_OFST 0x0000011C
35#define GQSPI_RXD_OFST 0x00000120
36#define GQSPI_TX_THRESHOLD_OFST 0x00000128
37#define GQSPI_RX_THRESHOLD_OFST 0x0000012C
38#define GQSPI_LPBK_DLY_ADJ_OFST 0x00000138
39#define GQSPI_GEN_FIFO_OFST 0x00000140
40#define GQSPI_SEL_OFST 0x00000144
41#define GQSPI_GF_THRESHOLD_OFST 0x00000150
42#define GQSPI_FIFO_CTRL_OFST 0x0000014C
43#define GQSPI_QSPIDMA_DST_CTRL_OFST 0x0000080C
44#define GQSPI_QSPIDMA_DST_SIZE_OFST 0x00000804
45#define GQSPI_QSPIDMA_DST_STS_OFST 0x00000808
46#define GQSPI_QSPIDMA_DST_I_STS_OFST 0x00000814
47#define GQSPI_QSPIDMA_DST_I_EN_OFST 0x00000818
48#define GQSPI_QSPIDMA_DST_I_DIS_OFST 0x0000081C
49#define GQSPI_QSPIDMA_DST_I_MASK_OFST 0x00000820
50#define GQSPI_QSPIDMA_DST_ADDR_OFST 0x00000800
51#define GQSPI_QSPIDMA_DST_ADDR_MSB_OFST 0x00000828
52
53/* GQSPI register bit masks */
54#define GQSPI_SEL_MASK 0x00000001
55#define GQSPI_EN_MASK 0x00000001
56#define GQSPI_LPBK_DLY_ADJ_USE_LPBK_MASK 0x00000020
57#define GQSPI_ISR_WR_TO_CLR_MASK 0x00000002
58#define GQSPI_IDR_ALL_MASK 0x00000FBE
59#define GQSPI_CFG_MODE_EN_MASK 0xC0000000
60#define GQSPI_CFG_GEN_FIFO_START_MODE_MASK 0x20000000
61#define GQSPI_CFG_ENDIAN_MASK 0x04000000
62#define GQSPI_CFG_EN_POLL_TO_MASK 0x00100000
63#define GQSPI_CFG_WP_HOLD_MASK 0x00080000
64#define GQSPI_CFG_BAUD_RATE_DIV_MASK 0x00000038
65#define GQSPI_CFG_CLK_PHA_MASK 0x00000004
66#define GQSPI_CFG_CLK_POL_MASK 0x00000002
67#define GQSPI_CFG_START_GEN_FIFO_MASK 0x10000000
68#define GQSPI_GENFIFO_IMM_DATA_MASK 0x000000FF
69#define GQSPI_GENFIFO_DATA_XFER 0x00000100
70#define GQSPI_GENFIFO_EXP 0x00000200
71#define GQSPI_GENFIFO_MODE_SPI 0x00000400
72#define GQSPI_GENFIFO_MODE_DUALSPI 0x00000800
73#define GQSPI_GENFIFO_MODE_QUADSPI 0x00000C00
74#define GQSPI_GENFIFO_MODE_MASK 0x00000C00
75#define GQSPI_GENFIFO_CS_LOWER 0x00001000
76#define GQSPI_GENFIFO_CS_UPPER 0x00002000
77#define GQSPI_GENFIFO_BUS_LOWER 0x00004000
78#define GQSPI_GENFIFO_BUS_UPPER 0x00008000
79#define GQSPI_GENFIFO_BUS_BOTH 0x0000C000
80#define GQSPI_GENFIFO_BUS_MASK 0x0000C000
81#define GQSPI_GENFIFO_TX 0x00010000
82#define GQSPI_GENFIFO_RX 0x00020000
83#define GQSPI_GENFIFO_STRIPE 0x00040000
84#define GQSPI_GENFIFO_POLL 0x00080000
85#define GQSPI_GENFIFO_EXP_START 0x00000100
86#define GQSPI_FIFO_CTRL_RST_RX_FIFO_MASK 0x00000004
87#define GQSPI_FIFO_CTRL_RST_TX_FIFO_MASK 0x00000002
88#define GQSPI_FIFO_CTRL_RST_GEN_FIFO_MASK 0x00000001
89#define GQSPI_ISR_RXEMPTY_MASK 0x00000800
90#define GQSPI_ISR_GENFIFOFULL_MASK 0x00000400
91#define GQSPI_ISR_GENFIFONOT_FULL_MASK 0x00000200
92#define GQSPI_ISR_TXEMPTY_MASK 0x00000100
93#define GQSPI_ISR_GENFIFOEMPTY_MASK 0x00000080
94#define GQSPI_ISR_RXFULL_MASK 0x00000020
95#define GQSPI_ISR_RXNEMPTY_MASK 0x00000010
96#define GQSPI_ISR_TXFULL_MASK 0x00000008
97#define GQSPI_ISR_TXNOT_FULL_MASK 0x00000004
98#define GQSPI_ISR_POLL_TIME_EXPIRE_MASK 0x00000002
99#define GQSPI_IER_TXNOT_FULL_MASK 0x00000004
100#define GQSPI_IER_RXEMPTY_MASK 0x00000800
101#define GQSPI_IER_POLL_TIME_EXPIRE_MASK 0x00000002
102#define GQSPI_IER_RXNEMPTY_MASK 0x00000010
103#define GQSPI_IER_GENFIFOEMPTY_MASK 0x00000080
104#define GQSPI_IER_TXEMPTY_MASK 0x00000100
105#define GQSPI_QSPIDMA_DST_INTR_ALL_MASK 0x000000FE
106#define GQSPI_QSPIDMA_DST_STS_WTC 0x0000E000
107#define GQSPI_CFG_MODE_EN_DMA_MASK 0x80000000
108#define GQSPI_ISR_IDR_MASK 0x00000994
109#define GQSPI_QSPIDMA_DST_I_EN_DONE_MASK 0x00000002
110#define GQSPI_QSPIDMA_DST_I_STS_DONE_MASK 0x00000002
111#define GQSPI_IRQ_MASK 0x00000980
112
113#define GQSPI_CFG_BAUD_RATE_DIV_SHIFT 3
114#define GQSPI_GENFIFO_CS_SETUP 0x4
115#define GQSPI_GENFIFO_CS_HOLD 0x3
116#define GQSPI_TXD_DEPTH 64
117#define GQSPI_RX_FIFO_THRESHOLD 32
118#define GQSPI_RX_FIFO_FILL (GQSPI_RX_FIFO_THRESHOLD * 4)
119#define GQSPI_TX_FIFO_THRESHOLD_RESET_VAL 32
120#define GQSPI_TX_FIFO_FILL (GQSPI_TXD_DEPTH -\
121 GQSPI_TX_FIFO_THRESHOLD_RESET_VAL)
122#define GQSPI_GEN_FIFO_THRESHOLD_RESET_VAL 0X10
123#define GQSPI_QSPIDMA_DST_CTRL_RESET_VAL 0x803FFA00
124#define GQSPI_SELECT_FLASH_CS_LOWER 0x1
125#define GQSPI_SELECT_FLASH_CS_UPPER 0x2
126#define GQSPI_SELECT_FLASH_CS_BOTH 0x3
127#define GQSPI_SELECT_FLASH_BUS_LOWER 0x1
128#define GQSPI_SELECT_FLASH_BUS_UPPER 0x2
129#define GQSPI_SELECT_FLASH_BUS_BOTH 0x3
130#define GQSPI_BAUD_DIV_MAX 7 /* Baud rate divisor maximum */
131#define GQSPI_BAUD_DIV_SHIFT 2 /* Baud rate divisor shift */
132#define GQSPI_SELECT_MODE_SPI 0x1
133#define GQSPI_SELECT_MODE_DUALSPI 0x2
134#define GQSPI_SELECT_MODE_QUADSPI 0x4
135#define GQSPI_DMA_UNALIGN 0x3
136#define GQSPI_DEFAULT_NUM_CS 1 /* Default number of chip selects */
137
138enum mode_type {GQSPI_MODE_IO, GQSPI_MODE_DMA};
139
140/**
141 * struct zynqmp_qspi - Defines qspi driver instance
142 * @regs: Virtual address of the QSPI controller registers
143 * @refclk: Pointer to the peripheral clock
144 * @pclk: Pointer to the APB clock
145 * @irq: IRQ number
146 * @dev: Pointer to struct device
147 * @txbuf: Pointer to the TX buffer
148 * @rxbuf: Pointer to the RX buffer
149 * @bytes_to_transfer: Number of bytes left to transfer
150 * @bytes_to_receive: Number of bytes left to receive
151 * @genfifocs: Used for chip select
152 * @genfifobus: Used to select the upper or lower bus
153 * @dma_rx_bytes: Remaining bytes to receive by DMA mode
154 * @dma_addr: DMA address after mapping the kernel buffer
155 * @genfifoentry: Used for storing the genfifoentry instruction.
156 * @mode: Defines the mode in which QSPI is operating
157 */
158struct zynqmp_qspi {
159 void __iomem *regs;
160 struct clk *refclk;
161 struct clk *pclk;
162 int irq;
163 struct device *dev;
164 const void *txbuf;
165 void *rxbuf;
166 int bytes_to_transfer;
167 int bytes_to_receive;
168 u32 genfifocs;
169 u32 genfifobus;
170 u32 dma_rx_bytes;
171 dma_addr_t dma_addr;
172 u32 genfifoentry;
173 enum mode_type mode;
174};
175
176/**
177 * zynqmp_gqspi_read: For GQSPI controller read operation
178 * @xqspi: Pointer to the zynqmp_qspi structure
179 * @offset: Offset from where to read
180 */
181static u32 zynqmp_gqspi_read(struct zynqmp_qspi *xqspi, u32 offset)
182{
183 return readl_relaxed(xqspi->regs + offset);
184}
185
186/**
187 * zynqmp_gqspi_write: For GQSPI controller write operation
188 * @xqspi: Pointer to the zynqmp_qspi structure
189 * @offset: Offset where to write
190 * @val: Value to be written
191 */
192static inline void zynqmp_gqspi_write(struct zynqmp_qspi *xqspi, u32 offset,
193 u32 val)
194{
195 writel_relaxed(val, (xqspi->regs + offset));
196}
197
198/**
199 * zynqmp_gqspi_selectslave: For selection of slave device
200 * @instanceptr: Pointer to the zynqmp_qspi structure
201 * @flashcs: For chip select
202 * @flashbus: To check which bus is selected- upper or lower
203 */
204static void zynqmp_gqspi_selectslave(struct zynqmp_qspi *instanceptr,
205 u8 slavecs, u8 slavebus)
206{
207 /*
208 * Bus and CS lines selected here will be updated in the instance and
209 * used for subsequent GENFIFO entries during transfer.
210 */
211
212 /* Choose slave select line */
213 switch (slavecs) {
214 case GQSPI_SELECT_FLASH_CS_BOTH:
215 instanceptr->genfifocs = GQSPI_GENFIFO_CS_LOWER |
216 GQSPI_GENFIFO_CS_UPPER;
Dan Carpenter861a4812015-06-24 17:31:33 +0300217 break;
Ranjit Waghmodedfe11a12015-06-10 16:08:21 +0530218 case GQSPI_SELECT_FLASH_CS_UPPER:
219 instanceptr->genfifocs = GQSPI_GENFIFO_CS_UPPER;
220 break;
221 case GQSPI_SELECT_FLASH_CS_LOWER:
222 instanceptr->genfifocs = GQSPI_GENFIFO_CS_LOWER;
223 break;
224 default:
225 dev_warn(instanceptr->dev, "Invalid slave select\n");
226 }
227
228 /* Choose the bus */
229 switch (slavebus) {
230 case GQSPI_SELECT_FLASH_BUS_BOTH:
231 instanceptr->genfifobus = GQSPI_GENFIFO_BUS_LOWER |
232 GQSPI_GENFIFO_BUS_UPPER;
233 break;
234 case GQSPI_SELECT_FLASH_BUS_UPPER:
235 instanceptr->genfifobus = GQSPI_GENFIFO_BUS_UPPER;
236 break;
237 case GQSPI_SELECT_FLASH_BUS_LOWER:
238 instanceptr->genfifobus = GQSPI_GENFIFO_BUS_LOWER;
239 break;
240 default:
241 dev_warn(instanceptr->dev, "Invalid slave bus\n");
242 }
243}
244
245/**
246 * zynqmp_qspi_init_hw: Initialize the hardware
247 * @xqspi: Pointer to the zynqmp_qspi structure
248 *
249 * The default settings of the QSPI controller's configurable parameters on
250 * reset are
251 * - Master mode
252 * - TX threshold set to 1
253 * - RX threshold set to 1
254 * - Flash memory interface mode enabled
255 * This function performs the following actions
256 * - Disable and clear all the interrupts
257 * - Enable manual slave select
258 * - Enable manual start
259 * - Deselect all the chip select lines
260 * - Set the little endian mode of TX FIFO and
261 * - Enable the QSPI controller
262 */
263static void zynqmp_qspi_init_hw(struct zynqmp_qspi *xqspi)
264{
265 u32 config_reg;
266
267 /* Select the GQSPI mode */
268 zynqmp_gqspi_write(xqspi, GQSPI_SEL_OFST, GQSPI_SEL_MASK);
269 /* Clear and disable interrupts */
270 zynqmp_gqspi_write(xqspi, GQSPI_ISR_OFST,
271 zynqmp_gqspi_read(xqspi, GQSPI_ISR_OFST) |
272 GQSPI_ISR_WR_TO_CLR_MASK);
273 /* Clear the DMA STS */
274 zynqmp_gqspi_write(xqspi, GQSPI_QSPIDMA_DST_I_STS_OFST,
275 zynqmp_gqspi_read(xqspi,
276 GQSPI_QSPIDMA_DST_I_STS_OFST));
277 zynqmp_gqspi_write(xqspi, GQSPI_QSPIDMA_DST_STS_OFST,
278 zynqmp_gqspi_read(xqspi,
279 GQSPI_QSPIDMA_DST_STS_OFST) |
280 GQSPI_QSPIDMA_DST_STS_WTC);
281 zynqmp_gqspi_write(xqspi, GQSPI_IDR_OFST, GQSPI_IDR_ALL_MASK);
282 zynqmp_gqspi_write(xqspi,
283 GQSPI_QSPIDMA_DST_I_DIS_OFST,
284 GQSPI_QSPIDMA_DST_INTR_ALL_MASK);
285 /* Disable the GQSPI */
286 zynqmp_gqspi_write(xqspi, GQSPI_EN_OFST, 0x0);
287 config_reg = zynqmp_gqspi_read(xqspi, GQSPI_CONFIG_OFST);
288 config_reg &= ~GQSPI_CFG_MODE_EN_MASK;
289 /* Manual start */
290 config_reg |= GQSPI_CFG_GEN_FIFO_START_MODE_MASK;
291 /* Little endian by default */
292 config_reg &= ~GQSPI_CFG_ENDIAN_MASK;
293 /* Disable poll time out */
294 config_reg &= ~GQSPI_CFG_EN_POLL_TO_MASK;
295 /* Set hold bit */
296 config_reg |= GQSPI_CFG_WP_HOLD_MASK;
297 /* Clear pre-scalar by default */
298 config_reg &= ~GQSPI_CFG_BAUD_RATE_DIV_MASK;
299 /* CPHA 0 */
300 config_reg &= ~GQSPI_CFG_CLK_PHA_MASK;
301 /* CPOL 0 */
302 config_reg &= ~GQSPI_CFG_CLK_POL_MASK;
303 zynqmp_gqspi_write(xqspi, GQSPI_CONFIG_OFST, config_reg);
304
305 /* Clear the TX and RX FIFO */
306 zynqmp_gqspi_write(xqspi, GQSPI_FIFO_CTRL_OFST,
307 GQSPI_FIFO_CTRL_RST_RX_FIFO_MASK |
308 GQSPI_FIFO_CTRL_RST_TX_FIFO_MASK |
309 GQSPI_FIFO_CTRL_RST_GEN_FIFO_MASK);
310 /* Set by default to allow for high frequencies */
311 zynqmp_gqspi_write(xqspi, GQSPI_LPBK_DLY_ADJ_OFST,
312 zynqmp_gqspi_read(xqspi, GQSPI_LPBK_DLY_ADJ_OFST) |
313 GQSPI_LPBK_DLY_ADJ_USE_LPBK_MASK);
314 /* Reset thresholds */
315 zynqmp_gqspi_write(xqspi, GQSPI_TX_THRESHOLD_OFST,
316 GQSPI_TX_FIFO_THRESHOLD_RESET_VAL);
317 zynqmp_gqspi_write(xqspi, GQSPI_RX_THRESHOLD_OFST,
318 GQSPI_RX_FIFO_THRESHOLD);
319 zynqmp_gqspi_write(xqspi, GQSPI_GF_THRESHOLD_OFST,
320 GQSPI_GEN_FIFO_THRESHOLD_RESET_VAL);
321 zynqmp_gqspi_selectslave(xqspi,
322 GQSPI_SELECT_FLASH_CS_LOWER,
323 GQSPI_SELECT_FLASH_BUS_LOWER);
324 /* Initialize DMA */
325 zynqmp_gqspi_write(xqspi,
326 GQSPI_QSPIDMA_DST_CTRL_OFST,
327 GQSPI_QSPIDMA_DST_CTRL_RESET_VAL);
328
329 /* Enable the GQSPI */
330 zynqmp_gqspi_write(xqspi, GQSPI_EN_OFST, GQSPI_EN_MASK);
331}
332
333/**
334 * zynqmp_qspi_copy_read_data: Copy data to RX buffer
335 * @xqspi: Pointer to the zynqmp_qspi structure
336 * @data: The variable where data is stored
337 * @size: Number of bytes to be copied from data to RX buffer
338 */
339static void zynqmp_qspi_copy_read_data(struct zynqmp_qspi *xqspi,
340 ulong data, u8 size)
341{
342 memcpy(xqspi->rxbuf, &data, size);
343 xqspi->rxbuf += size;
344 xqspi->bytes_to_receive -= size;
345}
346
347/**
348 * zynqmp_prepare_transfer_hardware: Prepares hardware for transfer.
349 * @master: Pointer to the spi_master structure which provides
350 * information about the controller.
351 *
352 * This function enables SPI master controller.
353 *
354 * Return: 0 on success; error value otherwise
355 */
356static int zynqmp_prepare_transfer_hardware(struct spi_master *master)
357{
358 struct zynqmp_qspi *xqspi = spi_master_get_devdata(master);
359 int ret;
360
361 ret = clk_enable(xqspi->refclk);
362 if (ret)
363 goto clk_err;
364
365 ret = clk_enable(xqspi->pclk);
366 if (ret)
367 goto clk_err;
368
369 zynqmp_gqspi_write(xqspi, GQSPI_EN_OFST, GQSPI_EN_MASK);
370 return 0;
371clk_err:
372 return ret;
373}
374
375/**
376 * zynqmp_unprepare_transfer_hardware: Relaxes hardware after transfer
377 * @master: Pointer to the spi_master structure which provides
378 * information about the controller.
379 *
380 * This function disables the SPI master controller.
381 *
382 * Return: Always 0
383 */
384static int zynqmp_unprepare_transfer_hardware(struct spi_master *master)
385{
386 struct zynqmp_qspi *xqspi = spi_master_get_devdata(master);
387
388 zynqmp_gqspi_write(xqspi, GQSPI_EN_OFST, 0x0);
389 clk_disable(xqspi->refclk);
390 clk_disable(xqspi->pclk);
391 return 0;
392}
393
394/**
395 * zynqmp_qspi_chipselect: Select or deselect the chip select line
396 * @qspi: Pointer to the spi_device structure
397 * @is_high: Select(0) or deselect (1) the chip select line
398 */
399static void zynqmp_qspi_chipselect(struct spi_device *qspi, bool is_high)
400{
401 struct zynqmp_qspi *xqspi = spi_master_get_devdata(qspi->master);
402 ulong timeout;
403 u32 genfifoentry = 0x0, statusreg;
404
405 genfifoentry |= GQSPI_GENFIFO_MODE_SPI;
406 genfifoentry |= xqspi->genfifobus;
407
408 if (!is_high) {
409 genfifoentry |= xqspi->genfifocs;
410 genfifoentry |= GQSPI_GENFIFO_CS_SETUP;
411 } else {
412 genfifoentry |= GQSPI_GENFIFO_CS_HOLD;
413 }
414
415 zynqmp_gqspi_write(xqspi, GQSPI_GEN_FIFO_OFST, genfifoentry);
416
417 /* Dummy generic FIFO entry */
418 zynqmp_gqspi_write(xqspi, GQSPI_GEN_FIFO_OFST, 0x0);
419
420 /* Manually start the generic FIFO command */
421 zynqmp_gqspi_write(xqspi, GQSPI_CONFIG_OFST,
422 zynqmp_gqspi_read(xqspi, GQSPI_CONFIG_OFST) |
423 GQSPI_CFG_START_GEN_FIFO_MASK);
424
425 timeout = jiffies + msecs_to_jiffies(1000);
426
427 /* Wait until the generic FIFO command is empty */
428 do {
429 statusreg = zynqmp_gqspi_read(xqspi, GQSPI_ISR_OFST);
430
431 if ((statusreg & GQSPI_ISR_GENFIFOEMPTY_MASK) &&
432 (statusreg & GQSPI_ISR_TXEMPTY_MASK))
433 break;
434 else
435 cpu_relax();
436 } while (!time_after_eq(jiffies, timeout));
437
438 if (time_after_eq(jiffies, timeout))
439 dev_err(xqspi->dev, "Chip select timed out\n");
440}
441
442/**
443 * zynqmp_qspi_setup_transfer: Configure QSPI controller for specified
444 * transfer
445 * @qspi: Pointer to the spi_device structure
446 * @transfer: Pointer to the spi_transfer structure which provides
447 * information about next transfer setup parameters
448 *
449 * Sets the operational mode of QSPI controller for the next QSPI transfer and
450 * sets the requested clock frequency.
451 *
452 * Return: Always 0
453 *
454 * Note:
455 * If the requested frequency is not an exact match with what can be
456 * obtained using the pre-scalar value, the driver sets the clock
457 * frequency which is lower than the requested frequency (maximum lower)
458 * for the transfer.
459 *
460 * If the requested frequency is higher or lower than that is supported
461 * by the QSPI controller the driver will set the highest or lowest
462 * frequency supported by controller.
463 */
464static int zynqmp_qspi_setup_transfer(struct spi_device *qspi,
465 struct spi_transfer *transfer)
466{
467 struct zynqmp_qspi *xqspi = spi_master_get_devdata(qspi->master);
468 ulong clk_rate;
469 u32 config_reg, req_hz, baud_rate_val = 0;
470
471 if (transfer)
472 req_hz = transfer->speed_hz;
473 else
474 req_hz = qspi->max_speed_hz;
475
476 /* Set the clock frequency */
477 /* If req_hz == 0, default to lowest speed */
478 clk_rate = clk_get_rate(xqspi->refclk);
479
480 while ((baud_rate_val < GQSPI_BAUD_DIV_MAX) &&
481 (clk_rate /
482 (GQSPI_BAUD_DIV_SHIFT << baud_rate_val)) > req_hz)
483 baud_rate_val++;
484
485 config_reg = zynqmp_gqspi_read(xqspi, GQSPI_CONFIG_OFST);
486
487 /* Set the QSPI clock phase and clock polarity */
488 config_reg &= (~GQSPI_CFG_CLK_PHA_MASK) & (~GQSPI_CFG_CLK_POL_MASK);
489
490 if (qspi->mode & SPI_CPHA)
491 config_reg |= GQSPI_CFG_CLK_PHA_MASK;
492 if (qspi->mode & SPI_CPOL)
493 config_reg |= GQSPI_CFG_CLK_POL_MASK;
494
495 config_reg &= ~GQSPI_CFG_BAUD_RATE_DIV_MASK;
496 config_reg |= (baud_rate_val << GQSPI_CFG_BAUD_RATE_DIV_SHIFT);
497 zynqmp_gqspi_write(xqspi, GQSPI_CONFIG_OFST, config_reg);
498 return 0;
499}
500
501/**
502 * zynqmp_qspi_setup: Configure the QSPI controller
503 * @qspi: Pointer to the spi_device structure
504 *
505 * Sets the operational mode of QSPI controller for the next QSPI transfer,
506 * baud rate and divisor value to setup the requested qspi clock.
507 *
508 * Return: 0 on success; error value otherwise.
509 */
510static int zynqmp_qspi_setup(struct spi_device *qspi)
511{
512 if (qspi->master->busy)
513 return -EBUSY;
514 return 0;
515}
516
517/**
518 * zynqmp_qspi_filltxfifo: Fills the TX FIFO as long as there is room in
519 * the FIFO or the bytes required to be
520 * transmitted.
521 * @xqspi: Pointer to the zynqmp_qspi structure
522 * @size: Number of bytes to be copied from TX buffer to TX FIFO
523 */
524static void zynqmp_qspi_filltxfifo(struct zynqmp_qspi *xqspi, int size)
525{
526 u32 count = 0, intermediate;
527
528 while ((xqspi->bytes_to_transfer > 0) && (count < size)) {
529 memcpy(&intermediate, xqspi->txbuf, 4);
530 zynqmp_gqspi_write(xqspi, GQSPI_TXD_OFST, intermediate);
531
532 if (xqspi->bytes_to_transfer >= 4) {
533 xqspi->txbuf += 4;
534 xqspi->bytes_to_transfer -= 4;
535 } else {
536 xqspi->txbuf += xqspi->bytes_to_transfer;
537 xqspi->bytes_to_transfer = 0;
538 }
539 count++;
540 }
541}
542
543/**
544 * zynqmp_qspi_readrxfifo: Fills the RX FIFO as long as there is room in
545 * the FIFO.
546 * @xqspi: Pointer to the zynqmp_qspi structure
547 * @size: Number of bytes to be copied from RX buffer to RX FIFO
548 */
549static void zynqmp_qspi_readrxfifo(struct zynqmp_qspi *xqspi, u32 size)
550{
551 ulong data;
552 int count = 0;
553
554 while ((count < size) && (xqspi->bytes_to_receive > 0)) {
555 if (xqspi->bytes_to_receive >= 4) {
556 (*(u32 *) xqspi->rxbuf) =
557 zynqmp_gqspi_read(xqspi, GQSPI_RXD_OFST);
558 xqspi->rxbuf += 4;
559 xqspi->bytes_to_receive -= 4;
560 count += 4;
561 } else {
562 data = zynqmp_gqspi_read(xqspi, GQSPI_RXD_OFST);
563 count += xqspi->bytes_to_receive;
564 zynqmp_qspi_copy_read_data(xqspi, data,
565 xqspi->bytes_to_receive);
566 xqspi->bytes_to_receive = 0;
567 }
568 }
569}
570
571/**
572 * zynqmp_process_dma_irq: Handler for DMA done interrupt of QSPI
573 * controller
574 * @xqspi: zynqmp_qspi instance pointer
575 *
576 * This function handles DMA interrupt only.
577 */
578static void zynqmp_process_dma_irq(struct zynqmp_qspi *xqspi)
579{
580 u32 config_reg, genfifoentry;
581
582 dma_unmap_single(xqspi->dev, xqspi->dma_addr,
583 xqspi->dma_rx_bytes, DMA_FROM_DEVICE);
584 xqspi->rxbuf += xqspi->dma_rx_bytes;
585 xqspi->bytes_to_receive -= xqspi->dma_rx_bytes;
586 xqspi->dma_rx_bytes = 0;
587
588 /* Disabling the DMA interrupts */
589 zynqmp_gqspi_write(xqspi, GQSPI_QSPIDMA_DST_I_DIS_OFST,
590 GQSPI_QSPIDMA_DST_I_EN_DONE_MASK);
591
592 if (xqspi->bytes_to_receive > 0) {
593 /* Switch to IO mode,for remaining bytes to receive */
594 config_reg = zynqmp_gqspi_read(xqspi, GQSPI_CONFIG_OFST);
595 config_reg &= ~GQSPI_CFG_MODE_EN_MASK;
596 zynqmp_gqspi_write(xqspi, GQSPI_CONFIG_OFST, config_reg);
597
598 /* Initiate the transfer of remaining bytes */
599 genfifoentry = xqspi->genfifoentry;
600 genfifoentry |= xqspi->bytes_to_receive;
601 zynqmp_gqspi_write(xqspi, GQSPI_GEN_FIFO_OFST, genfifoentry);
602
603 /* Dummy generic FIFO entry */
604 zynqmp_gqspi_write(xqspi, GQSPI_GEN_FIFO_OFST, 0x0);
605
606 /* Manual start */
607 zynqmp_gqspi_write(xqspi, GQSPI_CONFIG_OFST,
608 (zynqmp_gqspi_read(xqspi, GQSPI_CONFIG_OFST) |
609 GQSPI_CFG_START_GEN_FIFO_MASK));
610
611 /* Enable the RX interrupts for IO mode */
612 zynqmp_gqspi_write(xqspi, GQSPI_IER_OFST,
613 GQSPI_IER_GENFIFOEMPTY_MASK |
614 GQSPI_IER_RXNEMPTY_MASK |
615 GQSPI_IER_RXEMPTY_MASK);
616 }
617}
618
619/**
620 * zynqmp_qspi_irq: Interrupt service routine of the QSPI controller
621 * @irq: IRQ number
622 * @dev_id: Pointer to the xqspi structure
623 *
624 * This function handles TX empty only.
625 * On TX empty interrupt this function reads the received data from RX FIFO
626 * and fills the TX FIFO if there is any data remaining to be transferred.
627 *
628 * Return: IRQ_HANDLED when interrupt is handled
629 * IRQ_NONE otherwise.
630 */
631static irqreturn_t zynqmp_qspi_irq(int irq, void *dev_id)
632{
633 struct spi_master *master = dev_id;
634 struct zynqmp_qspi *xqspi = spi_master_get_devdata(master);
635 int ret = IRQ_NONE;
636 u32 status, mask, dma_status = 0;
637
638 status = zynqmp_gqspi_read(xqspi, GQSPI_ISR_OFST);
639 zynqmp_gqspi_write(xqspi, GQSPI_ISR_OFST, status);
640 mask = (status & ~(zynqmp_gqspi_read(xqspi, GQSPI_IMASK_OFST)));
641
642 /* Read and clear DMA status */
643 if (xqspi->mode == GQSPI_MODE_DMA) {
644 dma_status =
645 zynqmp_gqspi_read(xqspi, GQSPI_QSPIDMA_DST_I_STS_OFST);
646 zynqmp_gqspi_write(xqspi, GQSPI_QSPIDMA_DST_I_STS_OFST,
647 dma_status);
648 }
649
650 if (mask & GQSPI_ISR_TXNOT_FULL_MASK) {
651 zynqmp_qspi_filltxfifo(xqspi, GQSPI_TX_FIFO_FILL);
652 ret = IRQ_HANDLED;
653 }
654
655 if (dma_status & GQSPI_QSPIDMA_DST_I_STS_DONE_MASK) {
656 zynqmp_process_dma_irq(xqspi);
657 ret = IRQ_HANDLED;
658 } else if (!(mask & GQSPI_IER_RXEMPTY_MASK) &&
659 (mask & GQSPI_IER_GENFIFOEMPTY_MASK)) {
660 zynqmp_qspi_readrxfifo(xqspi, GQSPI_RX_FIFO_FILL);
661 ret = IRQ_HANDLED;
662 }
663
664 if ((xqspi->bytes_to_receive == 0) && (xqspi->bytes_to_transfer == 0)
665 && ((status & GQSPI_IRQ_MASK) == GQSPI_IRQ_MASK)) {
666 zynqmp_gqspi_write(xqspi, GQSPI_IDR_OFST, GQSPI_ISR_IDR_MASK);
667 spi_finalize_current_transfer(master);
668 ret = IRQ_HANDLED;
669 }
670 return ret;
671}
672
673/**
674 * zynqmp_qspi_selectspimode: Selects SPI mode - x1 or x2 or x4.
675 * @xqspi: xqspi is a pointer to the GQSPI instance
676 * @spimode: spimode - SPI or DUAL or QUAD.
677 * Return: Mask to set desired SPI mode in GENFIFO entry.
678 */
679static inline u32 zynqmp_qspi_selectspimode(struct zynqmp_qspi *xqspi,
680 u8 spimode)
681{
682 u32 mask = 0;
683
684 switch (spimode) {
685 case GQSPI_SELECT_MODE_DUALSPI:
686 mask = GQSPI_GENFIFO_MODE_DUALSPI;
687 break;
688 case GQSPI_SELECT_MODE_QUADSPI:
689 mask = GQSPI_GENFIFO_MODE_QUADSPI;
690 break;
691 case GQSPI_SELECT_MODE_SPI:
692 mask = GQSPI_GENFIFO_MODE_SPI;
693 break;
694 default:
695 dev_warn(xqspi->dev, "Invalid SPI mode\n");
696 }
697
698 return mask;
699}
700
701/**
702 * zynq_qspi_setuprxdma: This function sets up the RX DMA operation
703 * @xqspi: xqspi is a pointer to the GQSPI instance.
704 */
705static void zynq_qspi_setuprxdma(struct zynqmp_qspi *xqspi)
706{
707 u32 rx_bytes, rx_rem, config_reg;
708 dma_addr_t addr;
709 u64 dma_align = (u64)(uintptr_t)xqspi->rxbuf;
710
711 if ((xqspi->bytes_to_receive < 8) ||
712 ((dma_align & GQSPI_DMA_UNALIGN) != 0x0)) {
713 /* Setting to IO mode */
714 config_reg = zynqmp_gqspi_read(xqspi, GQSPI_CONFIG_OFST);
715 config_reg &= ~GQSPI_CFG_MODE_EN_MASK;
716 zynqmp_gqspi_write(xqspi, GQSPI_CONFIG_OFST, config_reg);
717 xqspi->mode = GQSPI_MODE_IO;
718 xqspi->dma_rx_bytes = 0;
719 return;
720 }
721
722 rx_rem = xqspi->bytes_to_receive % 4;
723 rx_bytes = (xqspi->bytes_to_receive - rx_rem);
724
725 addr = dma_map_single(xqspi->dev, (void *)xqspi->rxbuf,
726 rx_bytes, DMA_FROM_DEVICE);
727 if (dma_mapping_error(xqspi->dev, addr))
728 dev_err(xqspi->dev, "ERR:rxdma:memory not mapped\n");
729
730 xqspi->dma_rx_bytes = rx_bytes;
731 xqspi->dma_addr = addr;
732 zynqmp_gqspi_write(xqspi, GQSPI_QSPIDMA_DST_ADDR_OFST,
733 (u32)(addr & 0xffffffff));
734 addr = ((addr >> 16) >> 16);
735 zynqmp_gqspi_write(xqspi, GQSPI_QSPIDMA_DST_ADDR_MSB_OFST,
736 ((u32)addr) & 0xfff);
737
738 /* Enabling the DMA mode */
739 config_reg = zynqmp_gqspi_read(xqspi, GQSPI_CONFIG_OFST);
740 config_reg &= ~GQSPI_CFG_MODE_EN_MASK;
741 config_reg |= GQSPI_CFG_MODE_EN_DMA_MASK;
742 zynqmp_gqspi_write(xqspi, GQSPI_CONFIG_OFST, config_reg);
743
744 /* Switch to DMA mode */
745 xqspi->mode = GQSPI_MODE_DMA;
746
747 /* Write the number of bytes to transfer */
748 zynqmp_gqspi_write(xqspi, GQSPI_QSPIDMA_DST_SIZE_OFST, rx_bytes);
749}
750
751/**
752 * zynqmp_qspi_txrxsetup: This function checks the TX/RX buffers in
753 * the transfer and sets up the GENFIFO entries,
754 * TX FIFO as required.
755 * @xqspi: xqspi is a pointer to the GQSPI instance.
756 * @transfer: It is a pointer to the structure containing transfer data.
757 * @genfifoentry: genfifoentry is pointer to the variable in which
758 * GENFIFO mask is returned to calling function
759 */
760static void zynqmp_qspi_txrxsetup(struct zynqmp_qspi *xqspi,
761 struct spi_transfer *transfer,
762 u32 *genfifoentry)
763{
764 u32 config_reg;
765
766 /* Transmit */
767 if ((xqspi->txbuf != NULL) && (xqspi->rxbuf == NULL)) {
768 /* Setup data to be TXed */
769 *genfifoentry &= ~GQSPI_GENFIFO_RX;
770 *genfifoentry |= GQSPI_GENFIFO_DATA_XFER;
771 *genfifoentry |= GQSPI_GENFIFO_TX;
772 *genfifoentry |=
773 zynqmp_qspi_selectspimode(xqspi, transfer->tx_nbits);
774 xqspi->bytes_to_transfer = transfer->len;
775 if (xqspi->mode == GQSPI_MODE_DMA) {
776 config_reg = zynqmp_gqspi_read(xqspi,
777 GQSPI_CONFIG_OFST);
778 config_reg &= ~GQSPI_CFG_MODE_EN_MASK;
779 zynqmp_gqspi_write(xqspi, GQSPI_CONFIG_OFST,
780 config_reg);
781 xqspi->mode = GQSPI_MODE_IO;
782 }
783 zynqmp_qspi_filltxfifo(xqspi, GQSPI_TXD_DEPTH);
784 /* Discard RX data */
785 xqspi->bytes_to_receive = 0;
786 } else if ((xqspi->txbuf == NULL) && (xqspi->rxbuf != NULL)) {
787 /* Receive */
788
789 /* TX auto fill */
790 *genfifoentry &= ~GQSPI_GENFIFO_TX;
791 /* Setup RX */
792 *genfifoentry |= GQSPI_GENFIFO_DATA_XFER;
793 *genfifoentry |= GQSPI_GENFIFO_RX;
794 *genfifoentry |=
795 zynqmp_qspi_selectspimode(xqspi, transfer->rx_nbits);
796 xqspi->bytes_to_transfer = 0;
797 xqspi->bytes_to_receive = transfer->len;
798 zynq_qspi_setuprxdma(xqspi);
799 }
800}
801
802/**
803 * zynqmp_qspi_start_transfer: Initiates the QSPI transfer
804 * @master: Pointer to the spi_master structure which provides
805 * information about the controller.
806 * @qspi: Pointer to the spi_device structure
807 * @transfer: Pointer to the spi_transfer structure which provide information
808 * about next transfer parameters
809 *
810 * This function fills the TX FIFO, starts the QSPI transfer, and waits for the
811 * transfer to be completed.
812 *
813 * Return: Number of bytes transferred in the last transfer
814 */
815static int zynqmp_qspi_start_transfer(struct spi_master *master,
816 struct spi_device *qspi,
817 struct spi_transfer *transfer)
818{
819 struct zynqmp_qspi *xqspi = spi_master_get_devdata(master);
820 u32 genfifoentry = 0x0, transfer_len;
821
822 xqspi->txbuf = transfer->tx_buf;
823 xqspi->rxbuf = transfer->rx_buf;
824
825 zynqmp_qspi_setup_transfer(qspi, transfer);
826
827 genfifoentry |= xqspi->genfifocs;
828 genfifoentry |= xqspi->genfifobus;
829
830 zynqmp_qspi_txrxsetup(xqspi, transfer, &genfifoentry);
831
832 if (xqspi->mode == GQSPI_MODE_DMA)
833 transfer_len = xqspi->dma_rx_bytes;
834 else
835 transfer_len = transfer->len;
836
837 xqspi->genfifoentry = genfifoentry;
838 if ((transfer_len) < GQSPI_GENFIFO_IMM_DATA_MASK) {
839 genfifoentry &= ~GQSPI_GENFIFO_IMM_DATA_MASK;
840 genfifoentry |= transfer_len;
841 zynqmp_gqspi_write(xqspi, GQSPI_GEN_FIFO_OFST, genfifoentry);
842 } else {
843 int tempcount = transfer_len;
844 u32 exponent = 8; /* 2^8 = 256 */
845 u8 imm_data = tempcount & 0xFF;
846
847 tempcount &= ~(tempcount & 0xFF);
848 /* Immediate entry */
849 if (tempcount != 0) {
850 /* Exponent entries */
851 genfifoentry |= GQSPI_GENFIFO_EXP;
852 while (tempcount != 0) {
853 if (tempcount & GQSPI_GENFIFO_EXP_START) {
854 genfifoentry &=
855 ~GQSPI_GENFIFO_IMM_DATA_MASK;
856 genfifoentry |= exponent;
857 zynqmp_gqspi_write(xqspi,
858 GQSPI_GEN_FIFO_OFST,
859 genfifoentry);
860 }
861 tempcount = tempcount >> 1;
862 exponent++;
863 }
864 }
865 if (imm_data != 0) {
866 genfifoentry &= ~GQSPI_GENFIFO_EXP;
867 genfifoentry &= ~GQSPI_GENFIFO_IMM_DATA_MASK;
868 genfifoentry |= (u8) (imm_data & 0xFF);
869 zynqmp_gqspi_write(xqspi,
870 GQSPI_GEN_FIFO_OFST, genfifoentry);
871 }
872 }
873
874 if ((xqspi->mode == GQSPI_MODE_IO) &&
875 (xqspi->rxbuf != NULL)) {
876 /* Dummy generic FIFO entry */
877 zynqmp_gqspi_write(xqspi, GQSPI_GEN_FIFO_OFST, 0x0);
878 }
879
880 /* Since we are using manual mode */
881 zynqmp_gqspi_write(xqspi, GQSPI_CONFIG_OFST,
882 zynqmp_gqspi_read(xqspi, GQSPI_CONFIG_OFST) |
883 GQSPI_CFG_START_GEN_FIFO_MASK);
884
885 if (xqspi->txbuf != NULL)
886 /* Enable interrupts for TX */
887 zynqmp_gqspi_write(xqspi, GQSPI_IER_OFST,
888 GQSPI_IER_TXEMPTY_MASK |
889 GQSPI_IER_GENFIFOEMPTY_MASK |
890 GQSPI_IER_TXNOT_FULL_MASK);
891
892 if (xqspi->rxbuf != NULL) {
893 /* Enable interrupts for RX */
894 if (xqspi->mode == GQSPI_MODE_DMA) {
895 /* Enable DMA interrupts */
896 zynqmp_gqspi_write(xqspi,
897 GQSPI_QSPIDMA_DST_I_EN_OFST,
898 GQSPI_QSPIDMA_DST_I_EN_DONE_MASK);
899 } else {
900 zynqmp_gqspi_write(xqspi, GQSPI_IER_OFST,
901 GQSPI_IER_GENFIFOEMPTY_MASK |
902 GQSPI_IER_RXNEMPTY_MASK |
903 GQSPI_IER_RXEMPTY_MASK);
904 }
905 }
906
907 return transfer->len;
908}
909
910/**
911 * zynqmp_qspi_suspend: Suspend method for the QSPI driver
912 * @_dev: Address of the platform_device structure
913 *
914 * This function stops the QSPI driver queue and disables the QSPI controller
915 *
916 * Return: Always 0
917 */
918static int __maybe_unused zynqmp_qspi_suspend(struct device *dev)
919{
Geliang Tang9d0c1c32016-01-01 20:29:00 +0800920 struct platform_device *pdev = to_platform_device(dev);
Ranjit Waghmodedfe11a12015-06-10 16:08:21 +0530921 struct spi_master *master = platform_get_drvdata(pdev);
922
923 spi_master_suspend(master);
924
925 zynqmp_unprepare_transfer_hardware(master);
926
927 return 0;
928}
929
930/**
931 * zynqmp_qspi_resume: Resume method for the QSPI driver
932 * @dev: Address of the platform_device structure
933 *
934 * The function starts the QSPI driver queue and initializes the QSPI
935 * controller
936 *
937 * Return: 0 on success; error value otherwise
938 */
939static int __maybe_unused zynqmp_qspi_resume(struct device *dev)
940{
Geliang Tang9d0c1c32016-01-01 20:29:00 +0800941 struct platform_device *pdev = to_platform_device(dev);
Ranjit Waghmodedfe11a12015-06-10 16:08:21 +0530942 struct spi_master *master = platform_get_drvdata(pdev);
943 struct zynqmp_qspi *xqspi = spi_master_get_devdata(master);
944 int ret = 0;
945
946 ret = clk_enable(xqspi->pclk);
947 if (ret) {
948 dev_err(dev, "Cannot enable APB clock.\n");
949 return ret;
950 }
951
952 ret = clk_enable(xqspi->refclk);
953 if (ret) {
954 dev_err(dev, "Cannot enable device clock.\n");
955 clk_disable(xqspi->pclk);
956 return ret;
957 }
958
959 spi_master_resume(master);
960
961 return 0;
962}
963
964static SIMPLE_DEV_PM_OPS(zynqmp_qspi_dev_pm_ops, zynqmp_qspi_suspend,
965 zynqmp_qspi_resume);
966
967/**
968 * zynqmp_qspi_probe: Probe method for the QSPI driver
969 * @pdev: Pointer to the platform_device structure
970 *
971 * This function initializes the driver data structures and the hardware.
972 *
973 * Return: 0 on success; error value otherwise
974 */
975static int zynqmp_qspi_probe(struct platform_device *pdev)
976{
977 int ret = 0;
978 struct spi_master *master;
979 struct zynqmp_qspi *xqspi;
980 struct resource *res;
981 struct device *dev = &pdev->dev;
982
983 master = spi_alloc_master(&pdev->dev, sizeof(*xqspi));
984 if (!master)
985 return -ENOMEM;
986
987 xqspi = spi_master_get_devdata(master);
988 master->dev.of_node = pdev->dev.of_node;
989 platform_set_drvdata(pdev, master);
990
991 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
992 xqspi->regs = devm_ioremap_resource(&pdev->dev, res);
993 if (IS_ERR(xqspi->regs)) {
994 ret = PTR_ERR(xqspi->regs);
995 goto remove_master;
996 }
997
998 xqspi->dev = dev;
999 xqspi->pclk = devm_clk_get(&pdev->dev, "pclk");
1000 if (IS_ERR(xqspi->pclk)) {
1001 dev_err(dev, "pclk clock not found.\n");
1002 ret = PTR_ERR(xqspi->pclk);
1003 goto remove_master;
1004 }
1005
1006 ret = clk_prepare_enable(xqspi->pclk);
1007 if (ret) {
1008 dev_err(dev, "Unable to enable APB clock.\n");
1009 goto remove_master;
1010 }
1011
1012 xqspi->refclk = devm_clk_get(&pdev->dev, "ref_clk");
1013 if (IS_ERR(xqspi->refclk)) {
1014 dev_err(dev, "ref_clk clock not found.\n");
1015 ret = PTR_ERR(xqspi->refclk);
1016 goto clk_dis_pclk;
1017 }
1018
1019 ret = clk_prepare_enable(xqspi->refclk);
1020 if (ret) {
1021 dev_err(dev, "Unable to enable device clock.\n");
1022 goto clk_dis_pclk;
1023 }
1024
1025 /* QSPI controller initializations */
1026 zynqmp_qspi_init_hw(xqspi);
1027
1028 xqspi->irq = platform_get_irq(pdev, 0);
1029 if (xqspi->irq <= 0) {
1030 ret = -ENXIO;
1031 dev_err(dev, "irq resource not found\n");
1032 goto clk_dis_all;
1033 }
1034 ret = devm_request_irq(&pdev->dev, xqspi->irq, zynqmp_qspi_irq,
1035 0, pdev->name, master);
1036 if (ret != 0) {
1037 ret = -ENXIO;
1038 dev_err(dev, "request_irq failed\n");
1039 goto clk_dis_all;
1040 }
1041
1042 master->num_chipselect = GQSPI_DEFAULT_NUM_CS;
1043
1044 master->setup = zynqmp_qspi_setup;
1045 master->set_cs = zynqmp_qspi_chipselect;
1046 master->transfer_one = zynqmp_qspi_start_transfer;
1047 master->prepare_transfer_hardware = zynqmp_prepare_transfer_hardware;
1048 master->unprepare_transfer_hardware =
1049 zynqmp_unprepare_transfer_hardware;
1050 master->max_speed_hz = clk_get_rate(xqspi->refclk) / 2;
1051 master->bits_per_word_mask = SPI_BPW_MASK(8);
1052 master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_RX_DUAL | SPI_RX_QUAD |
1053 SPI_TX_DUAL | SPI_TX_QUAD;
1054
1055 if (master->dev.parent == NULL)
1056 master->dev.parent = &master->dev;
1057
1058 ret = spi_register_master(master);
1059 if (ret)
1060 goto clk_dis_all;
1061
1062 return 0;
1063
1064clk_dis_all:
1065 clk_disable_unprepare(xqspi->refclk);
1066clk_dis_pclk:
1067 clk_disable_unprepare(xqspi->pclk);
1068remove_master:
1069 spi_master_put(master);
1070
1071 return ret;
1072}
1073
1074/**
1075 * zynqmp_qspi_remove: Remove method for the QSPI driver
1076 * @pdev: Pointer to the platform_device structure
1077 *
1078 * This function is called if a device is physically removed from the system or
1079 * if the driver module is being unloaded. It frees all resources allocated to
1080 * the device.
1081 *
1082 * Return: 0 Always
1083 */
1084static int zynqmp_qspi_remove(struct platform_device *pdev)
1085{
1086 struct spi_master *master = platform_get_drvdata(pdev);
1087 struct zynqmp_qspi *xqspi = spi_master_get_devdata(master);
1088
1089 zynqmp_gqspi_write(xqspi, GQSPI_EN_OFST, 0x0);
1090 clk_disable_unprepare(xqspi->refclk);
1091 clk_disable_unprepare(xqspi->pclk);
1092
1093 spi_unregister_master(master);
1094
1095 return 0;
1096}
1097
1098static const struct of_device_id zynqmp_qspi_of_match[] = {
1099 { .compatible = "xlnx,zynqmp-qspi-1.0", },
1100 { /* End of table */ }
1101};
1102
1103MODULE_DEVICE_TABLE(of, zynqmp_qspi_of_match);
1104
1105static struct platform_driver zynqmp_qspi_driver = {
1106 .probe = zynqmp_qspi_probe,
1107 .remove = zynqmp_qspi_remove,
1108 .driver = {
1109 .name = "zynqmp-qspi",
1110 .of_match_table = zynqmp_qspi_of_match,
1111 .pm = &zynqmp_qspi_dev_pm_ops,
1112 },
1113};
1114
1115module_platform_driver(zynqmp_qspi_driver);
1116
1117MODULE_AUTHOR("Xilinx, Inc.");
1118MODULE_DESCRIPTION("Xilinx Zynqmp QSPI driver");
1119MODULE_LICENSE("GPL");