blob: 453d72bf259831f532fe32804edaea56438ec1c9 [file] [log] [blame]
Jeff Garzik669a5db2006-08-29 18:12:40 -04001/*
2 * pata_via.c - VIA PATA for new ATA layer
3 * (C) 2005-2006 Red Hat Inc
4 * Alan Cox <alan@redhat.com>
5 *
6 * Documentation
7 * Most chipset documentation available under NDA only
8 *
9 * VIA version guide
10 * VIA VT82C561 - early design, uses ata_generic currently
11 * VIA VT82C576 - MWDMA, 33Mhz
12 * VIA VT82C586 - MWDMA, 33Mhz
13 * VIA VT82C586a - Added UDMA to 33Mhz
14 * VIA VT82C586b - UDMA33
15 * VIA VT82C596a - Nonfunctional UDMA66
16 * VIA VT82C596b - Working UDMA66
17 * VIA VT82C686 - Nonfunctional UDMA66
18 * VIA VT82C686a - Working UDMA66
19 * VIA VT82C686b - Updated to UDMA100
20 * VIA VT8231 - UDMA100
21 * VIA VT8233 - UDMA100
22 * VIA VT8233a - UDMA133
23 * VIA VT8233c - UDMA100
24 * VIA VT8235 - UDMA133
25 * VIA VT8237 - UDMA133
Alan05c39e52007-01-31 17:14:38 +000026 * VIA VT8237S - UDMA133
Alan75f609d2006-12-04 16:38:25 +000027 * VIA VT8251 - UDMA133
Jeff Garzik669a5db2006-08-29 18:12:40 -040028 *
29 * Most registers remain compatible across chips. Others start reserved
30 * and acquire sensible semantics if set to 1 (eg cable detect). A few
31 * exceptions exist, notably around the FIFO settings.
32 *
33 * One additional quirk of the VIA design is that like ALi they use few
34 * PCI IDs for a lot of chips.
35 *
36 * Based heavily on:
37 *
38 * Version 3.38
39 *
40 * VIA IDE driver for Linux. Supported southbridges:
41 *
42 * vt82c576, vt82c586, vt82c586a, vt82c586b, vt82c596a, vt82c596b,
43 * vt82c686, vt82c686a, vt82c686b, vt8231, vt8233, vt8233c, vt8233a,
44 * vt8235, vt8237
45 *
46 * Copyright (c) 2000-2002 Vojtech Pavlik
47 *
48 * Based on the work of:
49 * Michel Aubry
50 * Jeff Garzik
51 * Andre Hedrick
52
53 */
54
55#include <linux/kernel.h>
56#include <linux/module.h>
57#include <linux/pci.h>
58#include <linux/init.h>
59#include <linux/blkdev.h>
60#include <linux/delay.h>
61#include <scsi/scsi_host.h>
62#include <linux/libata.h>
Alan Coxcf5792d2007-05-23 22:39:01 +010063#include <linux/dmi.h>
Jeff Garzik669a5db2006-08-29 18:12:40 -040064
65#define DRV_NAME "pata_via"
Bartlomiej Zolnierkiewicz943547a2007-12-02 03:47:01 +010066#define DRV_VERSION "0.3.3"
Jeff Garzik669a5db2006-08-29 18:12:40 -040067
68/*
69 * The following comes directly from Vojtech Pavlik's ide/pci/via82cxxx
70 * driver.
71 */
72
73enum {
74 VIA_UDMA = 0x007,
75 VIA_UDMA_NONE = 0x000,
76 VIA_UDMA_33 = 0x001,
77 VIA_UDMA_66 = 0x002,
78 VIA_UDMA_100 = 0x003,
79 VIA_UDMA_133 = 0x004,
80 VIA_BAD_PREQ = 0x010, /* Crashes if PREQ# till DDACK# set */
81 VIA_BAD_CLK66 = 0x020, /* 66 MHz clock doesn't work correctly */
82 VIA_SET_FIFO = 0x040, /* Needs to have FIFO split set */
83 VIA_NO_UNMASK = 0x080, /* Doesn't work with IRQ unmasking on */
84 VIA_BAD_ID = 0x100, /* Has wrong vendor ID (0x1107) */
85 VIA_BAD_AST = 0x200, /* Don't touch Address Setup Timing */
86 VIA_NO_ENABLES = 0x400, /* Has no enablebits */
87};
88
89/*
90 * VIA SouthBridge chips.
91 */
92
93static const struct via_isa_bridge {
94 const char *name;
95 u16 id;
96 u8 rev_min;
97 u8 rev_max;
98 u16 flags;
99} via_isa_bridges[] = {
Joseph Chanb311ec42007-09-10 22:06:01 -0400100 { "vx800", PCI_DEVICE_ID_VIA_VX800, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
Josepch Chane0b874d2007-01-27 13:47:08 +0100101 { "vt8237s", PCI_DEVICE_ID_VIA_8237S, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
Alan75f609d2006-12-04 16:38:25 +0000102 { "vt8251", PCI_DEVICE_ID_VIA_8251, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
Jeff Garzik669a5db2006-08-29 18:12:40 -0400103 { "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
104 { "vt6410", PCI_DEVICE_ID_VIA_6410, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_NO_ENABLES},
105 { "vt8237a", PCI_DEVICE_ID_VIA_8237A, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
106 { "vt8237", PCI_DEVICE_ID_VIA_8237, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
107 { "vt8235", PCI_DEVICE_ID_VIA_8235, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
108 { "vt8233a", PCI_DEVICE_ID_VIA_8233A, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
109 { "vt8233c", PCI_DEVICE_ID_VIA_8233C_0, 0x00, 0x2f, VIA_UDMA_100 },
110 { "vt8233", PCI_DEVICE_ID_VIA_8233_0, 0x00, 0x2f, VIA_UDMA_100 },
111 { "vt8231", PCI_DEVICE_ID_VIA_8231, 0x00, 0x2f, VIA_UDMA_100 },
112 { "vt82c686b", PCI_DEVICE_ID_VIA_82C686, 0x40, 0x4f, VIA_UDMA_100 },
113 { "vt82c686a", PCI_DEVICE_ID_VIA_82C686, 0x10, 0x2f, VIA_UDMA_66 },
114 { "vt82c686", PCI_DEVICE_ID_VIA_82C686, 0x00, 0x0f, VIA_UDMA_33 | VIA_BAD_CLK66 },
115 { "vt82c596b", PCI_DEVICE_ID_VIA_82C596, 0x10, 0x2f, VIA_UDMA_66 },
116 { "vt82c596a", PCI_DEVICE_ID_VIA_82C596, 0x00, 0x0f, VIA_UDMA_33 | VIA_BAD_CLK66 },
117 { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x47, 0x4f, VIA_UDMA_33 | VIA_SET_FIFO },
118 { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x40, 0x46, VIA_UDMA_33 | VIA_SET_FIFO | VIA_BAD_PREQ },
119 { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x30, 0x3f, VIA_UDMA_33 | VIA_SET_FIFO },
120 { "vt82c586a", PCI_DEVICE_ID_VIA_82C586_0, 0x20, 0x2f, VIA_UDMA_33 | VIA_SET_FIFO },
121 { "vt82c586", PCI_DEVICE_ID_VIA_82C586_0, 0x00, 0x0f, VIA_UDMA_NONE | VIA_SET_FIFO },
122 { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, VIA_UDMA_NONE | VIA_SET_FIFO | VIA_NO_UNMASK },
123 { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, VIA_UDMA_NONE | VIA_SET_FIFO | VIA_NO_UNMASK | VIA_BAD_ID },
124 { NULL }
125};
126
Alan Coxcf5792d2007-05-23 22:39:01 +0100127
128/*
129 * Cable special cases
130 */
131
Jeff Garzik18552562007-10-03 15:15:40 -0400132static const struct dmi_system_id cable_dmi_table[] = {
Alan Coxcf5792d2007-05-23 22:39:01 +0100133 {
134 .ident = "Acer Ferrari 3400",
135 .matches = {
136 DMI_MATCH(DMI_BOARD_VENDOR, "Acer,Inc."),
137 DMI_MATCH(DMI_BOARD_NAME, "Ferrari 3400"),
138 },
139 },
140 { }
141};
142
143static int via_cable_override(struct pci_dev *pdev)
144{
145 /* Systems by DMI */
146 if (dmi_check_system(cable_dmi_table))
147 return 1;
Alan Cox9edbdbe2007-08-22 22:57:48 +0100148 /* Arima W730-K8/Targa Visionary 811/... */
149 if (pdev->subsystem_vendor == 0x161F && pdev->subsystem_device == 0x2032)
150 return 1;
Alan Coxcf5792d2007-05-23 22:39:01 +0100151 return 0;
152}
153
154
Jeff Garzik669a5db2006-08-29 18:12:40 -0400155/**
156 * via_cable_detect - cable detection
157 * @ap: ATA port
158 *
159 * Perform cable detection. Actually for the VIA case the BIOS
160 * already did this for us. We read the values provided by the
161 * BIOS. If you are using an 8235 in a non-PC configuration you
162 * may need to update this code.
163 *
164 * Hotplug also impacts on this.
165 */
166
167static int via_cable_detect(struct ata_port *ap) {
Alan Cox97cb81c2007-03-07 16:56:54 +0000168 const struct via_isa_bridge *config = ap->host->private_data;
Jeff Garzik669a5db2006-08-29 18:12:40 -0400169 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
170 u32 ata66;
171
Alan Coxcf5792d2007-05-23 22:39:01 +0100172 if (via_cable_override(pdev))
173 return ATA_CBL_PATA40_SHORT;
174
Alan Cox97cb81c2007-03-07 16:56:54 +0000175 /* Early chips are 40 wire */
176 if ((config->flags & VIA_UDMA) < VIA_UDMA_66)
177 return ATA_CBL_PATA40;
178 /* UDMA 66 chips have only drive side logic */
Jeff Garzikb4479162007-10-25 20:47:30 -0400179 else if ((config->flags & VIA_UDMA) < VIA_UDMA_100)
Alan Cox97cb81c2007-03-07 16:56:54 +0000180 return ATA_CBL_PATA_UNK;
181 /* UDMA 100 or later */
Jeff Garzik669a5db2006-08-29 18:12:40 -0400182 pci_read_config_dword(pdev, 0x50, &ata66);
183 /* Check both the drive cable reporting bits, we might not have
184 two drives */
185 if (ata66 & (0x10100000 >> (16 * ap->port_no)))
186 return ATA_CBL_PATA80;
Alan Cox7d73a362007-07-26 18:38:06 +0100187 /* Check with ACPI so we can spot BIOS reported SATA bridges */
188 if (ata_acpi_cbl_80wire(ap))
189 return ATA_CBL_PATA80;
Alan Cox97cb81c2007-03-07 16:56:54 +0000190 return ATA_CBL_PATA40;
Jeff Garzik669a5db2006-08-29 18:12:40 -0400191}
192
Tejun Heocc0680a2007-08-06 18:36:23 +0900193static int via_pre_reset(struct ata_link *link, unsigned long deadline)
Jeff Garzik669a5db2006-08-29 18:12:40 -0400194{
Tejun Heocc0680a2007-08-06 18:36:23 +0900195 struct ata_port *ap = link->ap;
Jeff Garzik669a5db2006-08-29 18:12:40 -0400196 const struct via_isa_bridge *config = ap->host->private_data;
197
198 if (!(config->flags & VIA_NO_ENABLES)) {
199 static const struct pci_bits via_enable_bits[] = {
200 { 0x40, 1, 0x02, 0x02 },
201 { 0x40, 1, 0x01, 0x01 }
202 };
Jeff Garzik669a5db2006-08-29 18:12:40 -0400203 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
Alan Coxc9619222006-09-26 17:53:38 +0100204 if (!pci_test_config_bits(pdev, &via_enable_bits[ap->port_no]))
205 return -ENOENT;
Jeff Garzik669a5db2006-08-29 18:12:40 -0400206 }
Tejun Heod4b2bab2007-02-02 16:50:52 +0900207
Tejun Heocc0680a2007-08-06 18:36:23 +0900208 return ata_std_prereset(link, deadline);
Jeff Garzik669a5db2006-08-29 18:12:40 -0400209}
210
211
212/**
213 * via_error_handler - reset for VIA chips
214 * @ap: ATA port
215 *
216 * Handle the reset callback for the later chips with cable detect
217 */
218
219static void via_error_handler(struct ata_port *ap)
220{
221 ata_bmdma_drive_eh(ap, via_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
222}
223
224/**
225 * via_do_set_mode - set initial PIO mode data
226 * @ap: ATA interface
227 * @adev: ATA device
228 * @mode: ATA mode being programmed
229 * @tdiv: Clocks per PCI clock
230 * @set_ast: Set to program address setup
231 * @udma_type: UDMA mode/format of registers
232 *
233 * Program the VIA registers for DMA and PIO modes. Uses the ata timing
234 * support in order to compute modes.
235 *
236 * FIXME: Hotplug will require we serialize multiple mode changes
237 * on the two channels.
238 */
239
240static void via_do_set_mode(struct ata_port *ap, struct ata_device *adev, int mode, int tdiv, int set_ast, int udma_type)
241{
242 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
243 struct ata_device *peer = ata_dev_pair(adev);
244 struct ata_timing t, p;
245 static int via_clock = 33333; /* Bus clock in kHZ - ought to be tunable one day */
246 unsigned long T = 1000000000 / via_clock;
247 unsigned long UT = T/tdiv;
248 int ut;
249 int offset = 3 - (2*ap->port_no) - adev->devno;
250
Jeff Garzik669a5db2006-08-29 18:12:40 -0400251 /* Calculate the timing values we require */
252 ata_timing_compute(adev, mode, &t, T, UT);
253
254 /* We share 8bit timing so we must merge the constraints */
255 if (peer) {
256 if (peer->pio_mode) {
257 ata_timing_compute(peer, peer->pio_mode, &p, T, UT);
258 ata_timing_merge(&p, &t, &t, ATA_TIMING_8BIT);
259 }
260 }
261
262 /* Address setup is programmable but breaks on UDMA133 setups */
263 if (set_ast) {
264 u8 setup; /* 2 bits per drive */
265 int shift = 2 * offset;
266
267 pci_read_config_byte(pdev, 0x4C, &setup);
268 setup &= ~(3 << shift);
269 setup |= FIT(t.setup, 1, 4) << shift; /* 1,4 or 1,4 - 1 FIXME */
270 pci_write_config_byte(pdev, 0x4C, setup);
271 }
272
273 /* Load the PIO mode bits */
274 pci_write_config_byte(pdev, 0x4F - ap->port_no,
275 ((FIT(t.act8b, 1, 16) - 1) << 4) | (FIT(t.rec8b, 1, 16) - 1));
276 pci_write_config_byte(pdev, 0x48 + offset,
277 ((FIT(t.active, 1, 16) - 1) << 4) | (FIT(t.recover, 1, 16) - 1));
278
279 /* Load the UDMA bits according to type */
280 switch(udma_type) {
281 default:
282 /* BUG() ? */
283 /* fall through */
284 case 33:
285 ut = t.udma ? (0xe0 | (FIT(t.udma, 2, 5) - 2)) : 0x03;
286 break;
287 case 66:
288 ut = t.udma ? (0xe8 | (FIT(t.udma, 2, 9) - 2)) : 0x0f;
289 break;
290 case 100:
291 ut = t.udma ? (0xe0 | (FIT(t.udma, 2, 9) - 2)) : 0x07;
292 break;
293 case 133:
294 ut = t.udma ? (0xe0 | (FIT(t.udma, 2, 9) - 2)) : 0x07;
295 break;
296 }
Laurent Riffard08ebd432007-09-02 21:01:32 +0200297
Jeff Garzik669a5db2006-08-29 18:12:40 -0400298 /* Set UDMA unless device is not UDMA capable */
Bartlomiej Zolnierkiewicz943547a2007-12-02 03:47:01 +0100299 if (udma_type && t.udma) {
Laurent Riffard08ebd432007-09-02 21:01:32 +0200300 u8 cable80_status;
301
302 /* Get 80-wire cable detection bit */
303 pci_read_config_byte(pdev, 0x50 + offset, &cable80_status);
304 cable80_status &= 0x10;
305
306 pci_write_config_byte(pdev, 0x50 + offset, ut | cable80_status);
307 }
Jeff Garzik669a5db2006-08-29 18:12:40 -0400308}
309
310static void via_set_piomode(struct ata_port *ap, struct ata_device *adev)
311{
312 const struct via_isa_bridge *config = ap->host->private_data;
313 int set_ast = (config->flags & VIA_BAD_AST) ? 0 : 1;
314 int mode = config->flags & VIA_UDMA;
315 static u8 tclock[5] = { 1, 1, 2, 3, 4 };
316 static u8 udma[5] = { 0, 33, 66, 100, 133 };
317
318 via_do_set_mode(ap, adev, adev->pio_mode, tclock[mode], set_ast, udma[mode]);
319}
320
321static void via_set_dmamode(struct ata_port *ap, struct ata_device *adev)
322{
323 const struct via_isa_bridge *config = ap->host->private_data;
324 int set_ast = (config->flags & VIA_BAD_AST) ? 0 : 1;
325 int mode = config->flags & VIA_UDMA;
326 static u8 tclock[5] = { 1, 1, 2, 3, 4 };
327 static u8 udma[5] = { 0, 33, 66, 100, 133 };
328
329 via_do_set_mode(ap, adev, adev->dma_mode, tclock[mode], set_ast, udma[mode]);
330}
331
332static struct scsi_host_template via_sht = {
333 .module = THIS_MODULE,
334 .name = DRV_NAME,
335 .ioctl = ata_scsi_ioctl,
336 .queuecommand = ata_scsi_queuecmd,
337 .can_queue = ATA_DEF_QUEUE,
338 .this_id = ATA_SHT_THIS_ID,
339 .sg_tablesize = LIBATA_MAX_PRD,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400340 .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
341 .emulated = ATA_SHT_EMULATED,
342 .use_clustering = ATA_SHT_USE_CLUSTERING,
343 .proc_name = DRV_NAME,
344 .dma_boundary = ATA_DMA_BOUNDARY,
345 .slave_configure = ata_scsi_slave_config,
Tejun Heoafdfe892006-11-29 11:26:47 +0900346 .slave_destroy = ata_scsi_slave_destroy,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400347 .bios_param = ata_std_bios_param,
348};
349
350static struct ata_port_operations via_port_ops = {
Jeff Garzik669a5db2006-08-29 18:12:40 -0400351 .set_piomode = via_set_piomode,
352 .set_dmamode = via_set_dmamode,
353 .mode_filter = ata_pci_default_filter,
354
355 .tf_load = ata_tf_load,
356 .tf_read = ata_tf_read,
357 .check_status = ata_check_status,
358 .exec_command = ata_exec_command,
359 .dev_select = ata_std_dev_select,
360
361 .freeze = ata_bmdma_freeze,
362 .thaw = ata_bmdma_thaw,
363 .error_handler = via_error_handler,
364 .post_internal_cmd = ata_bmdma_post_internal_cmd,
Alan Cox97cb81c2007-03-07 16:56:54 +0000365 .cable_detect = via_cable_detect,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400366
367 .bmdma_setup = ata_bmdma_setup,
368 .bmdma_start = ata_bmdma_start,
369 .bmdma_stop = ata_bmdma_stop,
370 .bmdma_status = ata_bmdma_status,
371
372 .qc_prep = ata_qc_prep,
373 .qc_issue = ata_qc_issue_prot,
Jeff Garzikbda30282006-09-27 05:41:13 -0400374
Tejun Heo0d5ff562007-02-01 15:06:36 +0900375 .data_xfer = ata_data_xfer,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400376
377 .irq_handler = ata_interrupt,
378 .irq_clear = ata_bmdma_irq_clear,
Akira Iguchi246ce3b2007-01-26 16:27:58 +0900379 .irq_on = ata_irq_on,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400380
Alan Cox81ad1832007-08-22 22:55:41 +0100381 .port_start = ata_sff_port_start,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400382};
383
384static struct ata_port_operations via_port_ops_noirq = {
Jeff Garzik669a5db2006-08-29 18:12:40 -0400385 .set_piomode = via_set_piomode,
386 .set_dmamode = via_set_dmamode,
387 .mode_filter = ata_pci_default_filter,
388
389 .tf_load = ata_tf_load,
390 .tf_read = ata_tf_read,
391 .check_status = ata_check_status,
392 .exec_command = ata_exec_command,
393 .dev_select = ata_std_dev_select,
394
395 .freeze = ata_bmdma_freeze,
396 .thaw = ata_bmdma_thaw,
397 .error_handler = via_error_handler,
398 .post_internal_cmd = ata_bmdma_post_internal_cmd,
Alan Cox97cb81c2007-03-07 16:56:54 +0000399 .cable_detect = via_cable_detect,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400400
401 .bmdma_setup = ata_bmdma_setup,
402 .bmdma_start = ata_bmdma_start,
403 .bmdma_stop = ata_bmdma_stop,
404 .bmdma_status = ata_bmdma_status,
405
406 .qc_prep = ata_qc_prep,
407 .qc_issue = ata_qc_issue_prot,
Jeff Garzikbda30282006-09-27 05:41:13 -0400408
Tejun Heo0d5ff562007-02-01 15:06:36 +0900409 .data_xfer = ata_data_xfer_noirq,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400410
411 .irq_handler = ata_interrupt,
412 .irq_clear = ata_bmdma_irq_clear,
Akira Iguchi246ce3b2007-01-26 16:27:58 +0900413 .irq_on = ata_irq_on,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400414
Alan Cox81ad1832007-08-22 22:55:41 +0100415 .port_start = ata_sff_port_start,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400416};
417
418/**
Alan627d2d32006-11-27 16:19:36 +0000419 * via_config_fifo - set up the FIFO
420 * @pdev: PCI device
421 * @flags: configuration flags
422 *
Robert P. J. Day3a4fa0a2007-10-19 23:10:43 +0200423 * Set the FIFO properties for this device if necessary. Used both on
Alan627d2d32006-11-27 16:19:36 +0000424 * set up and on and the resume path
425 */
426
427static void via_config_fifo(struct pci_dev *pdev, unsigned int flags)
428{
429 u8 enable;
Jeff Garzikf20b16f2006-12-11 11:14:06 -0500430
Alan627d2d32006-11-27 16:19:36 +0000431 /* 0x40 low bits indicate enabled channels */
432 pci_read_config_byte(pdev, 0x40 , &enable);
433 enable &= 3;
Jeff Garzikf20b16f2006-12-11 11:14:06 -0500434
Alan627d2d32006-11-27 16:19:36 +0000435 if (flags & VIA_SET_FIFO) {
Andrew Morton73720862006-12-20 13:09:10 -0500436 static const u8 fifo_setting[4] = {0x00, 0x60, 0x00, 0x20};
Alan627d2d32006-11-27 16:19:36 +0000437 u8 fifo;
438
439 pci_read_config_byte(pdev, 0x43, &fifo);
440
441 /* Clear PREQ# until DDACK# for errata */
442 if (flags & VIA_BAD_PREQ)
443 fifo &= 0x7F;
444 else
445 fifo &= 0x9f;
446 /* Turn on FIFO for enabled channels */
447 fifo |= fifo_setting[enable];
448 pci_write_config_byte(pdev, 0x43, fifo);
449 }
450}
451
452/**
Jeff Garzik669a5db2006-08-29 18:12:40 -0400453 * via_init_one - discovery callback
Alan627d2d32006-11-27 16:19:36 +0000454 * @pdev: PCI device
Jeff Garzik669a5db2006-08-29 18:12:40 -0400455 * @id: PCI table info
456 *
457 * A VIA IDE interface has been discovered. Figure out what revision
458 * and perform configuration work before handing it to the ATA layer
459 */
460
461static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
462{
463 /* Early VIA without UDMA support */
Tejun Heo1626aeb2007-05-04 12:43:58 +0200464 static const struct ata_port_info via_mwdma_info = {
Jeff Garzik669a5db2006-08-29 18:12:40 -0400465 .sht = &via_sht,
Tejun Heo464cf172007-05-27 15:10:40 +0200466 .flags = ATA_FLAG_SLAVE_POSS,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400467 .pio_mask = 0x1f,
468 .mwdma_mask = 0x07,
469 .port_ops = &via_port_ops
470 };
471 /* Ditto with IRQ masking required */
Tejun Heo1626aeb2007-05-04 12:43:58 +0200472 static const struct ata_port_info via_mwdma_info_borked = {
Jeff Garzik669a5db2006-08-29 18:12:40 -0400473 .sht = &via_sht,
Tejun Heo464cf172007-05-27 15:10:40 +0200474 .flags = ATA_FLAG_SLAVE_POSS,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400475 .pio_mask = 0x1f,
476 .mwdma_mask = 0x07,
477 .port_ops = &via_port_ops_noirq,
478 };
479 /* VIA UDMA 33 devices (and borked 66) */
Tejun Heo1626aeb2007-05-04 12:43:58 +0200480 static const struct ata_port_info via_udma33_info = {
Jeff Garzik669a5db2006-08-29 18:12:40 -0400481 .sht = &via_sht,
Tejun Heo464cf172007-05-27 15:10:40 +0200482 .flags = ATA_FLAG_SLAVE_POSS,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400483 .pio_mask = 0x1f,
484 .mwdma_mask = 0x07,
Jeff Garzikbf6263a2007-07-09 12:16:50 -0400485 .udma_mask = ATA_UDMA2,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400486 .port_ops = &via_port_ops
487 };
488 /* VIA UDMA 66 devices */
Tejun Heo1626aeb2007-05-04 12:43:58 +0200489 static const struct ata_port_info via_udma66_info = {
Jeff Garzik669a5db2006-08-29 18:12:40 -0400490 .sht = &via_sht,
Tejun Heo464cf172007-05-27 15:10:40 +0200491 .flags = ATA_FLAG_SLAVE_POSS,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400492 .pio_mask = 0x1f,
493 .mwdma_mask = 0x07,
Jeff Garzikbf6263a2007-07-09 12:16:50 -0400494 .udma_mask = ATA_UDMA4,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400495 .port_ops = &via_port_ops
496 };
497 /* VIA UDMA 100 devices */
Tejun Heo1626aeb2007-05-04 12:43:58 +0200498 static const struct ata_port_info via_udma100_info = {
Jeff Garzik669a5db2006-08-29 18:12:40 -0400499 .sht = &via_sht,
Tejun Heo464cf172007-05-27 15:10:40 +0200500 .flags = ATA_FLAG_SLAVE_POSS,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400501 .pio_mask = 0x1f,
502 .mwdma_mask = 0x07,
Jeff Garzikbf6263a2007-07-09 12:16:50 -0400503 .udma_mask = ATA_UDMA5,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400504 .port_ops = &via_port_ops
505 };
506 /* UDMA133 with bad AST (All current 133) */
Tejun Heo1626aeb2007-05-04 12:43:58 +0200507 static const struct ata_port_info via_udma133_info = {
Jeff Garzik669a5db2006-08-29 18:12:40 -0400508 .sht = &via_sht,
Tejun Heo464cf172007-05-27 15:10:40 +0200509 .flags = ATA_FLAG_SLAVE_POSS,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400510 .pio_mask = 0x1f,
511 .mwdma_mask = 0x07,
Jeff Garzikbf6263a2007-07-09 12:16:50 -0400512 .udma_mask = ATA_UDMA6, /* FIXME: should check north bridge */
Jeff Garzik669a5db2006-08-29 18:12:40 -0400513 .port_ops = &via_port_ops
514 };
Tejun Heo1626aeb2007-05-04 12:43:58 +0200515 struct ata_port_info type;
516 const struct ata_port_info *ppi[] = { &type, NULL };
Jeff Garzik669a5db2006-08-29 18:12:40 -0400517 struct pci_dev *isa = NULL;
518 const struct via_isa_bridge *config;
519 static int printed_version;
Jeff Garzik669a5db2006-08-29 18:12:40 -0400520 u8 enable;
521 u32 timing;
522
523 if (!printed_version++)
524 dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
525
526 /* To find out how the IDE will behave and what features we
527 actually have to look at the bridge not the IDE controller */
528 for (config = via_isa_bridges; config->id; config++)
529 if ((isa = pci_get_device(PCI_VENDOR_ID_VIA +
530 !!(config->flags & VIA_BAD_ID),
531 config->id, NULL))) {
532
Auke Kok44c10132007-06-08 15:46:36 -0700533 if (isa->revision >= config->rev_min &&
534 isa->revision <= config->rev_max)
Jeff Garzik669a5db2006-08-29 18:12:40 -0400535 break;
536 pci_dev_put(isa);
537 }
538
539 if (!config->id) {
540 printk(KERN_WARNING "via: Unknown VIA SouthBridge, disabling.\n");
541 return -ENODEV;
542 }
543 pci_dev_put(isa);
544
545 /* 0x40 low bits indicate enabled channels */
546 pci_read_config_byte(pdev, 0x40 , &enable);
547 enable &= 3;
548 if (enable == 0) {
549 return -ENODEV;
550 }
551
552 /* Initialise the FIFO for the enabled channels. */
Alan627d2d32006-11-27 16:19:36 +0000553 via_config_fifo(pdev, config->flags);
Jeff Garzikf20b16f2006-12-11 11:14:06 -0500554
Jeff Garzik669a5db2006-08-29 18:12:40 -0400555 /* Clock set up */
556 switch(config->flags & VIA_UDMA) {
557 case VIA_UDMA_NONE:
558 if (config->flags & VIA_NO_UNMASK)
Tejun Heo1626aeb2007-05-04 12:43:58 +0200559 type = via_mwdma_info_borked;
Jeff Garzik669a5db2006-08-29 18:12:40 -0400560 else
Tejun Heo1626aeb2007-05-04 12:43:58 +0200561 type = via_mwdma_info;
Jeff Garzik669a5db2006-08-29 18:12:40 -0400562 break;
563 case VIA_UDMA_33:
Tejun Heo1626aeb2007-05-04 12:43:58 +0200564 type = via_udma33_info;
Jeff Garzik669a5db2006-08-29 18:12:40 -0400565 break;
566 case VIA_UDMA_66:
Tejun Heo1626aeb2007-05-04 12:43:58 +0200567 type = via_udma66_info;
Jeff Garzik669a5db2006-08-29 18:12:40 -0400568 /* The 66 MHz devices require we enable the clock */
569 pci_read_config_dword(pdev, 0x50, &timing);
570 timing |= 0x80008;
571 pci_write_config_dword(pdev, 0x50, timing);
572 break;
573 case VIA_UDMA_100:
Tejun Heo1626aeb2007-05-04 12:43:58 +0200574 type = via_udma100_info;
Jeff Garzik669a5db2006-08-29 18:12:40 -0400575 break;
576 case VIA_UDMA_133:
Tejun Heo1626aeb2007-05-04 12:43:58 +0200577 type = via_udma133_info;
Jeff Garzik669a5db2006-08-29 18:12:40 -0400578 break;
579 default:
580 WARN_ON(1);
581 return -ENODEV;
582 }
583
584 if (config->flags & VIA_BAD_CLK66) {
585 /* Disable the 66MHz clock on problem devices */
586 pci_read_config_dword(pdev, 0x50, &timing);
587 timing &= ~0x80008;
588 pci_write_config_dword(pdev, 0x50, timing);
589 }
590
591 /* We have established the device type, now fire it up */
Tejun Heo1626aeb2007-05-04 12:43:58 +0200592 type.private_data = (void *)config;
Jeff Garzik669a5db2006-08-29 18:12:40 -0400593
Tejun Heo1626aeb2007-05-04 12:43:58 +0200594 return ata_pci_init_one(pdev, ppi);
Jeff Garzik669a5db2006-08-29 18:12:40 -0400595}
596
Tejun Heo438ac6d2007-03-02 17:31:26 +0900597#ifdef CONFIG_PM
Alan627d2d32006-11-27 16:19:36 +0000598/**
599 * via_reinit_one - reinit after resume
600 * @pdev; PCI device
601 *
602 * Called when the VIA PATA device is resumed. We must then
603 * reconfigure the fifo and other setup we may have altered. In
604 * addition the kernel needs to have the resume methods on PCI
605 * quirk supported.
606 */
607
608static int via_reinit_one(struct pci_dev *pdev)
609{
610 u32 timing;
611 struct ata_host *host = dev_get_drvdata(&pdev->dev);
612 const struct via_isa_bridge *config = host->private_data;
Jeff Garzikf20b16f2006-12-11 11:14:06 -0500613
Alan627d2d32006-11-27 16:19:36 +0000614 via_config_fifo(pdev, config->flags);
615
616 if ((config->flags & VIA_UDMA) == VIA_UDMA_66) {
617 /* The 66 MHz devices require we enable the clock */
618 pci_read_config_dword(pdev, 0x50, &timing);
619 timing |= 0x80008;
620 pci_write_config_dword(pdev, 0x50, timing);
621 }
622 if (config->flags & VIA_BAD_CLK66) {
623 /* Disable the 66MHz clock on problem devices */
624 pci_read_config_dword(pdev, 0x50, &timing);
625 timing &= ~0x80008;
626 pci_write_config_dword(pdev, 0x50, timing);
627 }
Jeff Garzikf20b16f2006-12-11 11:14:06 -0500628 return ata_pci_device_resume(pdev);
Alan627d2d32006-11-27 16:19:36 +0000629}
Tejun Heo438ac6d2007-03-02 17:31:26 +0900630#endif
Alan627d2d32006-11-27 16:19:36 +0000631
Jeff Garzik669a5db2006-08-29 18:12:40 -0400632static const struct pci_device_id via[] = {
Jeff Garzik52df0ee2007-05-25 05:02:06 -0400633 { PCI_VDEVICE(VIA, 0x0571), },
634 { PCI_VDEVICE(VIA, 0x0581), },
635 { PCI_VDEVICE(VIA, 0x1571), },
636 { PCI_VDEVICE(VIA, 0x3164), },
637 { PCI_VDEVICE(VIA, 0x5324), },
Jeff Garzik2d2744f2006-09-28 20:21:59 -0400638
639 { },
Jeff Garzik669a5db2006-08-29 18:12:40 -0400640};
641
642static struct pci_driver via_pci_driver = {
Jeff Garzik2d2744f2006-09-28 20:21:59 -0400643 .name = DRV_NAME,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400644 .id_table = via,
645 .probe = via_init_one,
Alan627d2d32006-11-27 16:19:36 +0000646 .remove = ata_pci_remove_one,
Tejun Heo438ac6d2007-03-02 17:31:26 +0900647#ifdef CONFIG_PM
Alan627d2d32006-11-27 16:19:36 +0000648 .suspend = ata_pci_device_suspend,
649 .resume = via_reinit_one,
Tejun Heo438ac6d2007-03-02 17:31:26 +0900650#endif
Jeff Garzik669a5db2006-08-29 18:12:40 -0400651};
652
653static int __init via_init(void)
654{
655 return pci_register_driver(&via_pci_driver);
656}
657
Jeff Garzik669a5db2006-08-29 18:12:40 -0400658static void __exit via_exit(void)
659{
660 pci_unregister_driver(&via_pci_driver);
661}
662
Jeff Garzik669a5db2006-08-29 18:12:40 -0400663MODULE_AUTHOR("Alan Cox");
664MODULE_DESCRIPTION("low-level driver for VIA PATA");
665MODULE_LICENSE("GPL");
666MODULE_DEVICE_TABLE(pci, via);
667MODULE_VERSION(DRV_VERSION);
668
669module_init(via_init);
670module_exit(via_exit);