Guenter Roeck | e1eb490 | 2013-03-10 16:54:19 -0700 | [diff] [blame] | 1 | /* |
| 2 | * Driver for Texas Instruments / National Semiconductor LM95234 |
| 3 | * |
| 4 | * Copyright (c) 2013 Guenter Roeck <linux@roeck-us.net> |
| 5 | * |
| 6 | * Derived from lm95241.c |
| 7 | * Copyright (C) 2008, 2010 Davide Rizzo <elpa.rizzo@gmail.com> |
| 8 | * |
| 9 | * This program is free software; you can redistribute it and/or modify |
| 10 | * it under the terms of the GNU General Public License as published by |
| 11 | * the Free Software Foundation; either version 2 of the License, or |
| 12 | * (at your option) any later version. |
| 13 | * |
| 14 | * This program is distributed in the hope that it will be useful, |
| 15 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 16 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 17 | * GNU General Public License for more details. |
| 18 | */ |
| 19 | |
| 20 | #include <linux/module.h> |
| 21 | #include <linux/init.h> |
| 22 | #include <linux/slab.h> |
| 23 | #include <linux/jiffies.h> |
| 24 | #include <linux/i2c.h> |
| 25 | #include <linux/hwmon.h> |
| 26 | #include <linux/hwmon-sysfs.h> |
| 27 | #include <linux/err.h> |
| 28 | #include <linux/mutex.h> |
| 29 | #include <linux/sysfs.h> |
| 30 | |
| 31 | #define DRVNAME "lm95234" |
| 32 | |
| 33 | static const unsigned short normal_i2c[] = { 0x18, 0x4d, 0x4e, I2C_CLIENT_END }; |
| 34 | |
| 35 | /* LM95234 registers */ |
| 36 | #define LM95234_REG_MAN_ID 0xFE |
| 37 | #define LM95234_REG_CHIP_ID 0xFF |
| 38 | #define LM95234_REG_STATUS 0x02 |
| 39 | #define LM95234_REG_CONFIG 0x03 |
| 40 | #define LM95234_REG_CONVRATE 0x04 |
| 41 | #define LM95234_REG_STS_FAULT 0x07 |
| 42 | #define LM95234_REG_STS_TCRIT1 0x08 |
| 43 | #define LM95234_REG_STS_TCRIT2 0x09 |
| 44 | #define LM95234_REG_TEMPH(x) ((x) + 0x10) |
| 45 | #define LM95234_REG_TEMPL(x) ((x) + 0x20) |
| 46 | #define LM95234_REG_UTEMPH(x) ((x) + 0x19) /* Remote only */ |
| 47 | #define LM95234_REG_UTEMPL(x) ((x) + 0x29) |
| 48 | #define LM95234_REG_REM_MODEL 0x30 |
| 49 | #define LM95234_REG_REM_MODEL_STS 0x38 |
| 50 | #define LM95234_REG_OFFSET(x) ((x) + 0x31) /* Remote only */ |
| 51 | #define LM95234_REG_TCRIT1(x) ((x) + 0x40) |
| 52 | #define LM95234_REG_TCRIT2(x) ((x) + 0x49) /* Remote channel 1,2 */ |
| 53 | #define LM95234_REG_TCRIT_HYST 0x5a |
| 54 | |
| 55 | #define NATSEMI_MAN_ID 0x01 |
| 56 | #define LM95234_CHIP_ID 0x79 |
| 57 | |
| 58 | /* Client data (each client gets its own) */ |
| 59 | struct lm95234_data { |
| 60 | struct device *hwmon_dev; |
| 61 | struct mutex update_lock; |
| 62 | unsigned long last_updated, interval; /* in jiffies */ |
| 63 | bool valid; /* false until following fields are valid */ |
| 64 | /* registers values */ |
| 65 | int temp[5]; /* temperature (signed) */ |
| 66 | u32 status; /* fault/alarm status */ |
| 67 | u8 tcrit1[5]; /* critical temperature limit */ |
| 68 | u8 tcrit2[2]; /* high temperature limit */ |
| 69 | s8 toffset[4]; /* remote temperature offset */ |
| 70 | u8 thyst; /* common hysteresis */ |
| 71 | |
| 72 | u8 sensor_type; /* temperature sensor type */ |
| 73 | }; |
| 74 | |
| 75 | static int lm95234_read_temp(struct i2c_client *client, int index, int *t) |
| 76 | { |
| 77 | int val; |
| 78 | u16 temp = 0; |
| 79 | |
| 80 | if (index) { |
| 81 | val = i2c_smbus_read_byte_data(client, |
| 82 | LM95234_REG_UTEMPH(index - 1)); |
| 83 | if (val < 0) |
| 84 | return val; |
| 85 | temp = val << 8; |
| 86 | val = i2c_smbus_read_byte_data(client, |
| 87 | LM95234_REG_UTEMPL(index - 1)); |
| 88 | if (val < 0) |
| 89 | return val; |
| 90 | temp |= val; |
| 91 | *t = temp; |
| 92 | } |
| 93 | /* |
| 94 | * Read signed temperature if unsigned temperature is 0, |
| 95 | * or if this is the local sensor. |
| 96 | */ |
| 97 | if (!temp) { |
| 98 | val = i2c_smbus_read_byte_data(client, |
| 99 | LM95234_REG_TEMPH(index)); |
| 100 | if (val < 0) |
| 101 | return val; |
| 102 | temp = val << 8; |
| 103 | val = i2c_smbus_read_byte_data(client, |
| 104 | LM95234_REG_TEMPL(index)); |
| 105 | if (val < 0) |
| 106 | return val; |
| 107 | temp |= val; |
| 108 | *t = (s16)temp; |
| 109 | } |
| 110 | return 0; |
| 111 | } |
| 112 | |
| 113 | static u16 update_intervals[] = { 143, 364, 1000, 2500 }; |
| 114 | |
| 115 | /* Fill value cache. Must be called with update lock held. */ |
| 116 | |
| 117 | static int lm95234_fill_cache(struct i2c_client *client) |
| 118 | { |
| 119 | struct lm95234_data *data = i2c_get_clientdata(client); |
| 120 | int i, ret; |
| 121 | |
| 122 | ret = i2c_smbus_read_byte_data(client, LM95234_REG_CONVRATE); |
| 123 | if (ret < 0) |
| 124 | return ret; |
| 125 | |
| 126 | data->interval = msecs_to_jiffies(update_intervals[ret & 0x03]); |
| 127 | |
| 128 | for (i = 0; i < ARRAY_SIZE(data->tcrit1); i++) { |
| 129 | ret = i2c_smbus_read_byte_data(client, LM95234_REG_TCRIT1(i)); |
| 130 | if (ret < 0) |
| 131 | return ret; |
| 132 | data->tcrit1[i] = ret; |
| 133 | } |
| 134 | for (i = 0; i < ARRAY_SIZE(data->tcrit2); i++) { |
| 135 | ret = i2c_smbus_read_byte_data(client, LM95234_REG_TCRIT2(i)); |
| 136 | if (ret < 0) |
| 137 | return ret; |
| 138 | data->tcrit2[i] = ret; |
| 139 | } |
| 140 | for (i = 0; i < ARRAY_SIZE(data->toffset); i++) { |
| 141 | ret = i2c_smbus_read_byte_data(client, LM95234_REG_OFFSET(i)); |
| 142 | if (ret < 0) |
| 143 | return ret; |
| 144 | data->toffset[i] = ret; |
| 145 | } |
| 146 | |
| 147 | ret = i2c_smbus_read_byte_data(client, LM95234_REG_TCRIT_HYST); |
| 148 | if (ret < 0) |
| 149 | return ret; |
| 150 | data->thyst = ret; |
| 151 | |
| 152 | ret = i2c_smbus_read_byte_data(client, LM95234_REG_REM_MODEL); |
| 153 | if (ret < 0) |
| 154 | return ret; |
| 155 | data->sensor_type = ret; |
| 156 | |
| 157 | return 0; |
| 158 | } |
| 159 | |
| 160 | static int lm95234_update_device(struct i2c_client *client, |
| 161 | struct lm95234_data *data) |
| 162 | { |
| 163 | int ret; |
| 164 | |
| 165 | mutex_lock(&data->update_lock); |
| 166 | |
| 167 | if (time_after(jiffies, data->last_updated + data->interval) || |
| 168 | !data->valid) { |
| 169 | int i; |
| 170 | |
| 171 | if (!data->valid) { |
| 172 | ret = lm95234_fill_cache(client); |
| 173 | if (ret < 0) |
| 174 | goto abort; |
| 175 | } |
| 176 | |
| 177 | data->valid = false; |
| 178 | for (i = 0; i < ARRAY_SIZE(data->temp); i++) { |
| 179 | ret = lm95234_read_temp(client, i, &data->temp[i]); |
| 180 | if (ret < 0) |
| 181 | goto abort; |
| 182 | } |
| 183 | |
| 184 | ret = i2c_smbus_read_byte_data(client, LM95234_REG_STS_FAULT); |
| 185 | if (ret < 0) |
| 186 | goto abort; |
| 187 | data->status = ret; |
| 188 | |
| 189 | ret = i2c_smbus_read_byte_data(client, LM95234_REG_STS_TCRIT1); |
| 190 | if (ret < 0) |
| 191 | goto abort; |
| 192 | data->status |= ret << 8; |
| 193 | |
| 194 | ret = i2c_smbus_read_byte_data(client, LM95234_REG_STS_TCRIT2); |
| 195 | if (ret < 0) |
| 196 | goto abort; |
| 197 | data->status |= ret << 16; |
| 198 | |
| 199 | data->last_updated = jiffies; |
| 200 | data->valid = true; |
| 201 | } |
| 202 | ret = 0; |
| 203 | abort: |
| 204 | mutex_unlock(&data->update_lock); |
| 205 | |
| 206 | return ret; |
| 207 | } |
| 208 | |
| 209 | static ssize_t show_temp(struct device *dev, struct device_attribute *attr, |
| 210 | char *buf) |
| 211 | { |
| 212 | struct i2c_client *client = to_i2c_client(dev); |
| 213 | struct lm95234_data *data = i2c_get_clientdata(client); |
| 214 | int index = to_sensor_dev_attr(attr)->index; |
| 215 | int ret = lm95234_update_device(client, data); |
| 216 | |
| 217 | if (ret) |
| 218 | return ret; |
| 219 | |
| 220 | return sprintf(buf, "%d\n", |
| 221 | DIV_ROUND_CLOSEST(data->temp[index] * 125, 32)); |
| 222 | } |
| 223 | |
| 224 | static ssize_t show_alarm(struct device *dev, |
| 225 | struct device_attribute *attr, char *buf) |
| 226 | { |
| 227 | struct i2c_client *client = to_i2c_client(dev); |
| 228 | struct lm95234_data *data = i2c_get_clientdata(client); |
| 229 | u32 mask = to_sensor_dev_attr(attr)->index; |
| 230 | int ret = lm95234_update_device(client, data); |
| 231 | |
| 232 | if (ret) |
| 233 | return ret; |
| 234 | |
| 235 | return sprintf(buf, "%u", !!(data->status & mask)); |
| 236 | } |
| 237 | |
| 238 | static ssize_t show_type(struct device *dev, struct device_attribute *attr, |
| 239 | char *buf) |
| 240 | { |
| 241 | struct i2c_client *client = to_i2c_client(dev); |
| 242 | struct lm95234_data *data = i2c_get_clientdata(client); |
| 243 | u8 mask = to_sensor_dev_attr(attr)->index; |
| 244 | int ret = lm95234_update_device(client, data); |
| 245 | |
| 246 | if (ret) |
| 247 | return ret; |
| 248 | |
| 249 | return sprintf(buf, data->sensor_type & mask ? "1\n" : "2\n"); |
| 250 | } |
| 251 | |
| 252 | static ssize_t set_type(struct device *dev, struct device_attribute *attr, |
| 253 | const char *buf, size_t count) |
| 254 | { |
| 255 | struct i2c_client *client = to_i2c_client(dev); |
| 256 | struct lm95234_data *data = i2c_get_clientdata(client); |
| 257 | unsigned long val; |
| 258 | u8 mask = to_sensor_dev_attr(attr)->index; |
| 259 | int ret = lm95234_update_device(client, data); |
| 260 | |
| 261 | if (ret) |
| 262 | return ret; |
| 263 | |
| 264 | ret = kstrtoul(buf, 10, &val); |
| 265 | if (ret < 0) |
| 266 | return ret; |
| 267 | |
| 268 | if (val != 1 && val != 2) |
| 269 | return -EINVAL; |
| 270 | |
| 271 | mutex_lock(&data->update_lock); |
| 272 | if (val == 1) |
| 273 | data->sensor_type |= mask; |
| 274 | else |
| 275 | data->sensor_type &= ~mask; |
| 276 | data->valid = false; |
| 277 | i2c_smbus_write_byte_data(client, LM95234_REG_REM_MODEL, |
| 278 | data->sensor_type); |
| 279 | mutex_unlock(&data->update_lock); |
| 280 | |
| 281 | return count; |
| 282 | } |
| 283 | |
| 284 | static ssize_t show_tcrit2(struct device *dev, struct device_attribute *attr, |
| 285 | char *buf) |
| 286 | { |
| 287 | struct i2c_client *client = to_i2c_client(dev); |
| 288 | struct lm95234_data *data = i2c_get_clientdata(client); |
| 289 | int index = to_sensor_dev_attr(attr)->index; |
| 290 | int ret = lm95234_update_device(client, data); |
| 291 | |
| 292 | if (ret) |
| 293 | return ret; |
| 294 | |
| 295 | return sprintf(buf, "%u", data->tcrit2[index] * 1000); |
| 296 | } |
| 297 | |
| 298 | static ssize_t set_tcrit2(struct device *dev, struct device_attribute *attr, |
| 299 | const char *buf, size_t count) |
| 300 | { |
| 301 | struct i2c_client *client = to_i2c_client(dev); |
| 302 | struct lm95234_data *data = i2c_get_clientdata(client); |
| 303 | int index = to_sensor_dev_attr(attr)->index; |
| 304 | long val; |
| 305 | int ret = lm95234_update_device(client, data); |
| 306 | |
| 307 | if (ret) |
| 308 | return ret; |
| 309 | |
| 310 | ret = kstrtol(buf, 10, &val); |
| 311 | if (ret < 0) |
| 312 | return ret; |
| 313 | |
| 314 | val = clamp_val(DIV_ROUND_CLOSEST(val, 1000), 0, index ? 255 : 127); |
| 315 | |
| 316 | mutex_lock(&data->update_lock); |
| 317 | data->tcrit2[index] = val; |
| 318 | i2c_smbus_write_byte_data(client, LM95234_REG_TCRIT2(index), val); |
| 319 | mutex_unlock(&data->update_lock); |
| 320 | |
| 321 | return count; |
| 322 | } |
| 323 | |
| 324 | static ssize_t show_tcrit2_hyst(struct device *dev, |
| 325 | struct device_attribute *attr, char *buf) |
| 326 | { |
| 327 | struct i2c_client *client = to_i2c_client(dev); |
| 328 | struct lm95234_data *data = i2c_get_clientdata(client); |
| 329 | int index = to_sensor_dev_attr(attr)->index; |
| 330 | int ret = lm95234_update_device(client, data); |
| 331 | |
| 332 | if (ret) |
| 333 | return ret; |
| 334 | |
| 335 | /* Result can be negative, so be careful with unsigned operands */ |
| 336 | return sprintf(buf, "%d", |
| 337 | ((int)data->tcrit2[index] - (int)data->thyst) * 1000); |
| 338 | } |
| 339 | |
| 340 | static ssize_t show_tcrit1(struct device *dev, struct device_attribute *attr, |
| 341 | char *buf) |
| 342 | { |
| 343 | struct i2c_client *client = to_i2c_client(dev); |
| 344 | struct lm95234_data *data = i2c_get_clientdata(client); |
| 345 | int index = to_sensor_dev_attr(attr)->index; |
| 346 | |
| 347 | return sprintf(buf, "%u", data->tcrit1[index] * 1000); |
| 348 | } |
| 349 | |
| 350 | static ssize_t set_tcrit1(struct device *dev, struct device_attribute *attr, |
| 351 | const char *buf, size_t count) |
| 352 | { |
| 353 | struct i2c_client *client = to_i2c_client(dev); |
| 354 | struct lm95234_data *data = i2c_get_clientdata(client); |
| 355 | int index = to_sensor_dev_attr(attr)->index; |
| 356 | long val; |
| 357 | int ret = lm95234_update_device(client, data); |
| 358 | |
| 359 | if (ret) |
| 360 | return ret; |
| 361 | |
| 362 | ret = kstrtol(buf, 10, &val); |
| 363 | if (ret < 0) |
| 364 | return ret; |
| 365 | |
| 366 | val = clamp_val(DIV_ROUND_CLOSEST(val, 1000), 0, 255); |
| 367 | |
| 368 | mutex_lock(&data->update_lock); |
| 369 | data->tcrit1[index] = val; |
| 370 | i2c_smbus_write_byte_data(client, LM95234_REG_TCRIT1(index), val); |
| 371 | mutex_unlock(&data->update_lock); |
| 372 | |
| 373 | return count; |
| 374 | } |
| 375 | |
| 376 | static ssize_t show_tcrit1_hyst(struct device *dev, |
| 377 | struct device_attribute *attr, char *buf) |
| 378 | { |
| 379 | struct i2c_client *client = to_i2c_client(dev); |
| 380 | struct lm95234_data *data = i2c_get_clientdata(client); |
| 381 | int index = to_sensor_dev_attr(attr)->index; |
| 382 | int ret = lm95234_update_device(client, data); |
| 383 | |
| 384 | if (ret) |
| 385 | return ret; |
| 386 | |
| 387 | /* Result can be negative, so be careful with unsigned operands */ |
| 388 | return sprintf(buf, "%d", |
| 389 | ((int)data->tcrit1[index] - (int)data->thyst) * 1000); |
| 390 | } |
| 391 | |
| 392 | static ssize_t set_tcrit1_hyst(struct device *dev, |
| 393 | struct device_attribute *attr, |
| 394 | const char *buf, size_t count) |
| 395 | { |
| 396 | struct i2c_client *client = to_i2c_client(dev); |
| 397 | struct lm95234_data *data = i2c_get_clientdata(client); |
| 398 | int index = to_sensor_dev_attr(attr)->index; |
| 399 | long val; |
| 400 | int ret = lm95234_update_device(client, data); |
| 401 | |
| 402 | if (ret) |
| 403 | return ret; |
| 404 | |
| 405 | ret = kstrtol(buf, 10, &val); |
| 406 | if (ret < 0) |
| 407 | return ret; |
| 408 | |
| 409 | val = DIV_ROUND_CLOSEST(val, 1000); |
| 410 | val = clamp_val((int)data->tcrit1[index] - val, 0, 31); |
| 411 | |
| 412 | mutex_lock(&data->update_lock); |
| 413 | data->thyst = val; |
| 414 | i2c_smbus_write_byte_data(client, LM95234_REG_TCRIT_HYST, val); |
| 415 | mutex_unlock(&data->update_lock); |
| 416 | |
| 417 | return count; |
| 418 | } |
| 419 | |
| 420 | static ssize_t show_offset(struct device *dev, struct device_attribute *attr, |
| 421 | char *buf) |
| 422 | { |
| 423 | struct i2c_client *client = to_i2c_client(dev); |
| 424 | struct lm95234_data *data = i2c_get_clientdata(client); |
| 425 | int index = to_sensor_dev_attr(attr)->index; |
| 426 | int ret = lm95234_update_device(client, data); |
| 427 | |
| 428 | if (ret) |
| 429 | return ret; |
| 430 | |
| 431 | return sprintf(buf, "%d", data->toffset[index] * 500); |
| 432 | } |
| 433 | |
| 434 | static ssize_t set_offset(struct device *dev, struct device_attribute *attr, |
| 435 | const char *buf, size_t count) |
| 436 | { |
| 437 | struct i2c_client *client = to_i2c_client(dev); |
| 438 | struct lm95234_data *data = i2c_get_clientdata(client); |
| 439 | int index = to_sensor_dev_attr(attr)->index; |
| 440 | long val; |
| 441 | int ret = lm95234_update_device(client, data); |
| 442 | |
| 443 | if (ret) |
| 444 | return ret; |
| 445 | |
| 446 | ret = kstrtol(buf, 10, &val); |
| 447 | if (ret < 0) |
| 448 | return ret; |
| 449 | |
| 450 | /* Accuracy is 1/2 degrees C */ |
| 451 | val = clamp_val(DIV_ROUND_CLOSEST(val, 500), -128, 127); |
| 452 | |
| 453 | mutex_lock(&data->update_lock); |
| 454 | data->toffset[index] = val; |
| 455 | i2c_smbus_write_byte_data(client, LM95234_REG_OFFSET(index), val); |
| 456 | mutex_unlock(&data->update_lock); |
| 457 | |
| 458 | return count; |
| 459 | } |
| 460 | |
| 461 | static ssize_t show_interval(struct device *dev, struct device_attribute *attr, |
| 462 | char *buf) |
| 463 | { |
| 464 | struct i2c_client *client = to_i2c_client(dev); |
| 465 | struct lm95234_data *data = i2c_get_clientdata(client); |
| 466 | int ret = lm95234_update_device(client, data); |
| 467 | |
| 468 | if (ret) |
| 469 | return ret; |
| 470 | |
| 471 | return sprintf(buf, "%lu\n", |
| 472 | DIV_ROUND_CLOSEST(data->interval * 1000, HZ)); |
| 473 | } |
| 474 | |
| 475 | static ssize_t set_interval(struct device *dev, struct device_attribute *attr, |
| 476 | const char *buf, size_t count) |
| 477 | { |
| 478 | struct i2c_client *client = to_i2c_client(dev); |
| 479 | struct lm95234_data *data = i2c_get_clientdata(client); |
| 480 | unsigned long val; |
| 481 | u8 regval; |
| 482 | int ret = lm95234_update_device(client, data); |
| 483 | |
| 484 | if (ret) |
| 485 | return ret; |
| 486 | |
| 487 | ret = kstrtoul(buf, 10, &val); |
| 488 | if (ret < 0) |
| 489 | return ret; |
| 490 | |
| 491 | for (regval = 0; regval < 3; regval++) { |
| 492 | if (val <= update_intervals[regval]) |
| 493 | break; |
| 494 | } |
| 495 | |
| 496 | mutex_lock(&data->update_lock); |
| 497 | data->interval = msecs_to_jiffies(update_intervals[regval]); |
| 498 | i2c_smbus_write_byte_data(client, LM95234_REG_CONVRATE, regval); |
| 499 | mutex_unlock(&data->update_lock); |
| 500 | |
| 501 | return count; |
| 502 | } |
| 503 | |
| 504 | static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0); |
| 505 | static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1); |
| 506 | static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 2); |
| 507 | static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, show_temp, NULL, 3); |
| 508 | static SENSOR_DEVICE_ATTR(temp5_input, S_IRUGO, show_temp, NULL, 4); |
| 509 | |
| 510 | static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_alarm, NULL, |
| 511 | BIT(0) | BIT(1)); |
| 512 | static SENSOR_DEVICE_ATTR(temp3_fault, S_IRUGO, show_alarm, NULL, |
| 513 | BIT(2) | BIT(3)); |
| 514 | static SENSOR_DEVICE_ATTR(temp4_fault, S_IRUGO, show_alarm, NULL, |
| 515 | BIT(4) | BIT(5)); |
| 516 | static SENSOR_DEVICE_ATTR(temp5_fault, S_IRUGO, show_alarm, NULL, |
| 517 | BIT(6) | BIT(7)); |
| 518 | |
| 519 | static SENSOR_DEVICE_ATTR(temp2_type, S_IWUSR | S_IRUGO, show_type, set_type, |
| 520 | BIT(1)); |
| 521 | static SENSOR_DEVICE_ATTR(temp3_type, S_IWUSR | S_IRUGO, show_type, set_type, |
| 522 | BIT(2)); |
| 523 | static SENSOR_DEVICE_ATTR(temp4_type, S_IWUSR | S_IRUGO, show_type, set_type, |
| 524 | BIT(3)); |
| 525 | static SENSOR_DEVICE_ATTR(temp5_type, S_IWUSR | S_IRUGO, show_type, set_type, |
| 526 | BIT(4)); |
| 527 | |
| 528 | static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_tcrit1, |
| 529 | set_tcrit1, 0); |
| 530 | static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_tcrit2, |
| 531 | set_tcrit2, 0); |
| 532 | static SENSOR_DEVICE_ATTR(temp3_max, S_IWUSR | S_IRUGO, show_tcrit2, |
| 533 | set_tcrit2, 1); |
| 534 | static SENSOR_DEVICE_ATTR(temp4_max, S_IWUSR | S_IRUGO, show_tcrit1, |
| 535 | set_tcrit1, 3); |
| 536 | static SENSOR_DEVICE_ATTR(temp5_max, S_IWUSR | S_IRUGO, show_tcrit1, |
| 537 | set_tcrit1, 4); |
| 538 | |
| 539 | static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO, show_tcrit1_hyst, |
| 540 | set_tcrit1_hyst, 0); |
| 541 | static SENSOR_DEVICE_ATTR(temp2_max_hyst, S_IRUGO, show_tcrit2_hyst, NULL, 0); |
| 542 | static SENSOR_DEVICE_ATTR(temp3_max_hyst, S_IRUGO, show_tcrit2_hyst, NULL, 1); |
| 543 | static SENSOR_DEVICE_ATTR(temp4_max_hyst, S_IRUGO, show_tcrit1_hyst, NULL, 3); |
| 544 | static SENSOR_DEVICE_ATTR(temp5_max_hyst, S_IRUGO, show_tcrit1_hyst, NULL, 4); |
| 545 | |
| 546 | static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL, |
| 547 | BIT(0 + 8)); |
| 548 | static SENSOR_DEVICE_ATTR(temp2_max_alarm, S_IRUGO, show_alarm, NULL, |
| 549 | BIT(1 + 16)); |
| 550 | static SENSOR_DEVICE_ATTR(temp3_max_alarm, S_IRUGO, show_alarm, NULL, |
| 551 | BIT(2 + 16)); |
| 552 | static SENSOR_DEVICE_ATTR(temp4_max_alarm, S_IRUGO, show_alarm, NULL, |
| 553 | BIT(3 + 8)); |
| 554 | static SENSOR_DEVICE_ATTR(temp5_max_alarm, S_IRUGO, show_alarm, NULL, |
| 555 | BIT(4 + 8)); |
| 556 | |
| 557 | static SENSOR_DEVICE_ATTR(temp2_crit, S_IWUSR | S_IRUGO, show_tcrit1, |
| 558 | set_tcrit1, 1); |
| 559 | static SENSOR_DEVICE_ATTR(temp3_crit, S_IWUSR | S_IRUGO, show_tcrit1, |
| 560 | set_tcrit1, 2); |
| 561 | |
| 562 | static SENSOR_DEVICE_ATTR(temp2_crit_hyst, S_IRUGO, show_tcrit1_hyst, NULL, 1); |
| 563 | static SENSOR_DEVICE_ATTR(temp3_crit_hyst, S_IRUGO, show_tcrit1_hyst, NULL, 2); |
| 564 | |
| 565 | static SENSOR_DEVICE_ATTR(temp2_crit_alarm, S_IRUGO, show_alarm, NULL, |
| 566 | BIT(1 + 8)); |
| 567 | static SENSOR_DEVICE_ATTR(temp3_crit_alarm, S_IRUGO, show_alarm, NULL, |
| 568 | BIT(2 + 8)); |
| 569 | |
| 570 | static SENSOR_DEVICE_ATTR(temp2_offset, S_IWUSR | S_IRUGO, show_offset, |
| 571 | set_offset, 0); |
| 572 | static SENSOR_DEVICE_ATTR(temp3_offset, S_IWUSR | S_IRUGO, show_offset, |
| 573 | set_offset, 1); |
| 574 | static SENSOR_DEVICE_ATTR(temp4_offset, S_IWUSR | S_IRUGO, show_offset, |
| 575 | set_offset, 2); |
| 576 | static SENSOR_DEVICE_ATTR(temp5_offset, S_IWUSR | S_IRUGO, show_offset, |
| 577 | set_offset, 3); |
| 578 | |
| 579 | static DEVICE_ATTR(update_interval, S_IWUSR | S_IRUGO, show_interval, |
| 580 | set_interval); |
| 581 | |
| 582 | static struct attribute *lm95234_attributes[] = { |
| 583 | &sensor_dev_attr_temp1_input.dev_attr.attr, |
| 584 | &sensor_dev_attr_temp2_input.dev_attr.attr, |
| 585 | &sensor_dev_attr_temp3_input.dev_attr.attr, |
| 586 | &sensor_dev_attr_temp4_input.dev_attr.attr, |
| 587 | &sensor_dev_attr_temp5_input.dev_attr.attr, |
| 588 | &sensor_dev_attr_temp2_fault.dev_attr.attr, |
| 589 | &sensor_dev_attr_temp3_fault.dev_attr.attr, |
| 590 | &sensor_dev_attr_temp4_fault.dev_attr.attr, |
| 591 | &sensor_dev_attr_temp5_fault.dev_attr.attr, |
| 592 | &sensor_dev_attr_temp2_type.dev_attr.attr, |
| 593 | &sensor_dev_attr_temp3_type.dev_attr.attr, |
| 594 | &sensor_dev_attr_temp4_type.dev_attr.attr, |
| 595 | &sensor_dev_attr_temp5_type.dev_attr.attr, |
| 596 | &sensor_dev_attr_temp1_max.dev_attr.attr, |
| 597 | &sensor_dev_attr_temp2_max.dev_attr.attr, |
| 598 | &sensor_dev_attr_temp3_max.dev_attr.attr, |
| 599 | &sensor_dev_attr_temp4_max.dev_attr.attr, |
| 600 | &sensor_dev_attr_temp5_max.dev_attr.attr, |
| 601 | &sensor_dev_attr_temp1_max_hyst.dev_attr.attr, |
| 602 | &sensor_dev_attr_temp2_max_hyst.dev_attr.attr, |
| 603 | &sensor_dev_attr_temp3_max_hyst.dev_attr.attr, |
| 604 | &sensor_dev_attr_temp4_max_hyst.dev_attr.attr, |
| 605 | &sensor_dev_attr_temp5_max_hyst.dev_attr.attr, |
| 606 | &sensor_dev_attr_temp1_max_alarm.dev_attr.attr, |
| 607 | &sensor_dev_attr_temp2_max_alarm.dev_attr.attr, |
| 608 | &sensor_dev_attr_temp3_max_alarm.dev_attr.attr, |
| 609 | &sensor_dev_attr_temp4_max_alarm.dev_attr.attr, |
| 610 | &sensor_dev_attr_temp5_max_alarm.dev_attr.attr, |
| 611 | &sensor_dev_attr_temp2_crit.dev_attr.attr, |
| 612 | &sensor_dev_attr_temp3_crit.dev_attr.attr, |
| 613 | &sensor_dev_attr_temp2_crit_hyst.dev_attr.attr, |
| 614 | &sensor_dev_attr_temp3_crit_hyst.dev_attr.attr, |
| 615 | &sensor_dev_attr_temp2_crit_alarm.dev_attr.attr, |
| 616 | &sensor_dev_attr_temp3_crit_alarm.dev_attr.attr, |
| 617 | &sensor_dev_attr_temp2_offset.dev_attr.attr, |
| 618 | &sensor_dev_attr_temp3_offset.dev_attr.attr, |
| 619 | &sensor_dev_attr_temp4_offset.dev_attr.attr, |
| 620 | &sensor_dev_attr_temp5_offset.dev_attr.attr, |
| 621 | &dev_attr_update_interval.attr, |
| 622 | NULL |
| 623 | }; |
| 624 | |
| 625 | static const struct attribute_group lm95234_group = { |
| 626 | .attrs = lm95234_attributes, |
| 627 | }; |
| 628 | |
| 629 | static int lm95234_detect(struct i2c_client *client, |
| 630 | struct i2c_board_info *info) |
| 631 | { |
| 632 | struct i2c_adapter *adapter = client->adapter; |
| 633 | int mfg_id, chip_id, val; |
| 634 | |
| 635 | if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) |
| 636 | return -ENODEV; |
| 637 | |
| 638 | mfg_id = i2c_smbus_read_byte_data(client, LM95234_REG_MAN_ID); |
| 639 | if (mfg_id != NATSEMI_MAN_ID) |
| 640 | return -ENODEV; |
| 641 | |
| 642 | chip_id = i2c_smbus_read_byte_data(client, LM95234_REG_CHIP_ID); |
| 643 | if (chip_id != LM95234_CHIP_ID) |
| 644 | return -ENODEV; |
| 645 | |
| 646 | val = i2c_smbus_read_byte_data(client, LM95234_REG_STATUS); |
| 647 | if (val & 0x30) |
| 648 | return -ENODEV; |
| 649 | |
| 650 | val = i2c_smbus_read_byte_data(client, LM95234_REG_CONFIG); |
| 651 | if (val & 0xbc) |
| 652 | return -ENODEV; |
| 653 | |
| 654 | val = i2c_smbus_read_byte_data(client, LM95234_REG_CONVRATE); |
| 655 | if (val & 0xfc) |
| 656 | return -ENODEV; |
| 657 | |
| 658 | val = i2c_smbus_read_byte_data(client, LM95234_REG_REM_MODEL); |
| 659 | if (val & 0xe1) |
| 660 | return -ENODEV; |
| 661 | |
| 662 | val = i2c_smbus_read_byte_data(client, LM95234_REG_REM_MODEL_STS); |
| 663 | if (val & 0xe1) |
| 664 | return -ENODEV; |
| 665 | |
| 666 | strlcpy(info->type, "lm95234", I2C_NAME_SIZE); |
| 667 | return 0; |
| 668 | } |
| 669 | |
| 670 | static int lm95234_init_client(struct i2c_client *client) |
| 671 | { |
| 672 | int val, model; |
| 673 | |
| 674 | /* start conversion if necessary */ |
| 675 | val = i2c_smbus_read_byte_data(client, LM95234_REG_CONFIG); |
| 676 | if (val < 0) |
| 677 | return val; |
| 678 | if (val & 0x40) |
| 679 | i2c_smbus_write_byte_data(client, LM95234_REG_CONFIG, |
| 680 | val & ~0x40); |
| 681 | |
| 682 | /* If diode type status reports an error, try to fix it */ |
| 683 | val = i2c_smbus_read_byte_data(client, LM95234_REG_REM_MODEL_STS); |
| 684 | if (val < 0) |
| 685 | return val; |
| 686 | model = i2c_smbus_read_byte_data(client, LM95234_REG_REM_MODEL); |
| 687 | if (model < 0) |
| 688 | return model; |
| 689 | if (model & val) { |
| 690 | dev_notice(&client->dev, |
| 691 | "Fixing remote diode type misconfiguration (0x%x)\n", |
| 692 | val); |
| 693 | i2c_smbus_write_byte_data(client, LM95234_REG_REM_MODEL, |
| 694 | model & ~val); |
| 695 | } |
| 696 | return 0; |
| 697 | } |
| 698 | |
| 699 | static int lm95234_probe(struct i2c_client *client, |
| 700 | const struct i2c_device_id *id) |
| 701 | { |
| 702 | struct device *dev = &client->dev; |
| 703 | struct lm95234_data *data; |
| 704 | int err; |
| 705 | |
| 706 | data = devm_kzalloc(dev, sizeof(struct lm95234_data), GFP_KERNEL); |
| 707 | if (!data) |
| 708 | return -ENOMEM; |
| 709 | |
| 710 | i2c_set_clientdata(client, data); |
| 711 | mutex_init(&data->update_lock); |
| 712 | |
| 713 | /* Initialize the LM95234 chip */ |
| 714 | err = lm95234_init_client(client); |
| 715 | if (err < 0) |
| 716 | return err; |
| 717 | |
| 718 | /* Register sysfs hooks */ |
| 719 | err = sysfs_create_group(&dev->kobj, &lm95234_group); |
| 720 | if (err) |
| 721 | return err; |
| 722 | |
| 723 | data->hwmon_dev = hwmon_device_register(dev); |
| 724 | if (IS_ERR(data->hwmon_dev)) { |
| 725 | err = PTR_ERR(data->hwmon_dev); |
| 726 | goto exit_remove_files; |
| 727 | } |
| 728 | |
| 729 | return 0; |
| 730 | |
| 731 | exit_remove_files: |
| 732 | sysfs_remove_group(&dev->kobj, &lm95234_group); |
| 733 | return err; |
| 734 | } |
| 735 | |
| 736 | static int lm95234_remove(struct i2c_client *client) |
| 737 | { |
| 738 | struct lm95234_data *data = i2c_get_clientdata(client); |
| 739 | |
| 740 | hwmon_device_unregister(data->hwmon_dev); |
| 741 | sysfs_remove_group(&client->dev.kobj, &lm95234_group); |
| 742 | |
| 743 | return 0; |
| 744 | } |
| 745 | |
| 746 | /* Driver data (common to all clients) */ |
| 747 | static const struct i2c_device_id lm95234_id[] = { |
| 748 | { "lm95234", 0 }, |
| 749 | { } |
| 750 | }; |
| 751 | MODULE_DEVICE_TABLE(i2c, lm95234_id); |
| 752 | |
| 753 | static struct i2c_driver lm95234_driver = { |
| 754 | .class = I2C_CLASS_HWMON, |
| 755 | .driver = { |
| 756 | .name = DRVNAME, |
| 757 | }, |
| 758 | .probe = lm95234_probe, |
| 759 | .remove = lm95234_remove, |
| 760 | .id_table = lm95234_id, |
| 761 | .detect = lm95234_detect, |
| 762 | .address_list = normal_i2c, |
| 763 | }; |
| 764 | |
| 765 | module_i2c_driver(lm95234_driver); |
| 766 | |
| 767 | MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>"); |
| 768 | MODULE_DESCRIPTION("LM95234 sensor driver"); |
| 769 | MODULE_LICENSE("GPL"); |