Hans de Goede | 69fb4dc | 2015-08-01 10:39:38 +0200 | [diff] [blame] | 1 | /* |
| 2 | * AXP20x PMIC USB power supply status driver |
| 3 | * |
| 4 | * Copyright (C) 2015 Hans de Goede <hdegoede@redhat.com> |
| 5 | * Copyright (C) 2014 Bruno Prémont <bonbons@linux-vserver.org> |
| 6 | * |
| 7 | * This program is free software; you can redistribute it and/or modify it |
| 8 | * under the terms of the GNU General Public License as published by the |
| 9 | * Free Software Foundation; either version 2 of the License, or (at your |
| 10 | * option) any later version. |
| 11 | */ |
| 12 | |
| 13 | #include <linux/device.h> |
| 14 | #include <linux/init.h> |
| 15 | #include <linux/interrupt.h> |
| 16 | #include <linux/kernel.h> |
| 17 | #include <linux/mfd/axp20x.h> |
| 18 | #include <linux/module.h> |
| 19 | #include <linux/of.h> |
| 20 | #include <linux/platform_device.h> |
| 21 | #include <linux/power_supply.h> |
| 22 | #include <linux/regmap.h> |
| 23 | #include <linux/slab.h> |
| 24 | |
| 25 | #define DRVNAME "axp20x-usb-power-supply" |
| 26 | |
| 27 | #define AXP20X_PWR_STATUS_VBUS_PRESENT BIT(5) |
| 28 | #define AXP20X_PWR_STATUS_VBUS_USED BIT(4) |
| 29 | |
| 30 | #define AXP20X_USB_STATUS_VBUS_VALID BIT(2) |
| 31 | |
| 32 | #define AXP20X_VBUS_VHOLD_uV(b) (4000000 + (((b) >> 3) & 7) * 100000) |
| 33 | #define AXP20X_VBUS_CLIMIT_MASK 3 |
| 34 | #define AXP20X_VBUC_CLIMIT_900mA 0 |
| 35 | #define AXP20X_VBUC_CLIMIT_500mA 1 |
| 36 | #define AXP20X_VBUC_CLIMIT_100mA 2 |
| 37 | #define AXP20X_VBUC_CLIMIT_NONE 3 |
| 38 | |
| 39 | #define AXP20X_ADC_EN1_VBUS_CURR BIT(2) |
| 40 | #define AXP20X_ADC_EN1_VBUS_VOLT BIT(3) |
| 41 | |
| 42 | #define AXP20X_VBUS_MON_VBUS_VALID BIT(3) |
| 43 | |
| 44 | struct axp20x_usb_power { |
| 45 | struct regmap *regmap; |
| 46 | struct power_supply *supply; |
| 47 | }; |
| 48 | |
| 49 | static irqreturn_t axp20x_usb_power_irq(int irq, void *devid) |
| 50 | { |
| 51 | struct axp20x_usb_power *power = devid; |
| 52 | |
| 53 | power_supply_changed(power->supply); |
| 54 | |
| 55 | return IRQ_HANDLED; |
| 56 | } |
| 57 | |
| 58 | static int axp20x_usb_power_get_property(struct power_supply *psy, |
| 59 | enum power_supply_property psp, union power_supply_propval *val) |
| 60 | { |
| 61 | struct axp20x_usb_power *power = power_supply_get_drvdata(psy); |
| 62 | unsigned int input, v; |
| 63 | int ret; |
| 64 | |
| 65 | switch (psp) { |
| 66 | case POWER_SUPPLY_PROP_VOLTAGE_MIN: |
| 67 | ret = regmap_read(power->regmap, AXP20X_VBUS_IPSOUT_MGMT, &v); |
| 68 | if (ret) |
| 69 | return ret; |
| 70 | |
| 71 | val->intval = AXP20X_VBUS_VHOLD_uV(v); |
| 72 | return 0; |
| 73 | case POWER_SUPPLY_PROP_VOLTAGE_NOW: |
| 74 | ret = axp20x_read_variable_width(power->regmap, |
| 75 | AXP20X_VBUS_V_ADC_H, 12); |
| 76 | if (ret < 0) |
| 77 | return ret; |
| 78 | |
| 79 | val->intval = ret * 1700; /* 1 step = 1.7 mV */ |
| 80 | return 0; |
| 81 | case POWER_SUPPLY_PROP_CURRENT_MAX: |
| 82 | ret = regmap_read(power->regmap, AXP20X_VBUS_IPSOUT_MGMT, &v); |
| 83 | if (ret) |
| 84 | return ret; |
| 85 | |
| 86 | switch (v & AXP20X_VBUS_CLIMIT_MASK) { |
| 87 | case AXP20X_VBUC_CLIMIT_100mA: |
| 88 | val->intval = 100000; |
| 89 | break; |
| 90 | case AXP20X_VBUC_CLIMIT_500mA: |
| 91 | val->intval = 500000; |
| 92 | break; |
| 93 | case AXP20X_VBUC_CLIMIT_900mA: |
| 94 | val->intval = 900000; |
| 95 | break; |
| 96 | case AXP20X_VBUC_CLIMIT_NONE: |
| 97 | val->intval = -1; |
| 98 | break; |
| 99 | } |
| 100 | return 0; |
| 101 | case POWER_SUPPLY_PROP_CURRENT_NOW: |
| 102 | ret = axp20x_read_variable_width(power->regmap, |
| 103 | AXP20X_VBUS_I_ADC_H, 12); |
| 104 | if (ret < 0) |
| 105 | return ret; |
| 106 | |
| 107 | val->intval = ret * 375; /* 1 step = 0.375 mA */ |
| 108 | return 0; |
| 109 | default: |
| 110 | break; |
| 111 | } |
| 112 | |
| 113 | /* All the properties below need the input-status reg value */ |
| 114 | ret = regmap_read(power->regmap, AXP20X_PWR_INPUT_STATUS, &input); |
| 115 | if (ret) |
| 116 | return ret; |
| 117 | |
| 118 | switch (psp) { |
| 119 | case POWER_SUPPLY_PROP_HEALTH: |
| 120 | if (!(input & AXP20X_PWR_STATUS_VBUS_PRESENT)) { |
| 121 | val->intval = POWER_SUPPLY_HEALTH_UNKNOWN; |
| 122 | break; |
| 123 | } |
| 124 | |
| 125 | ret = regmap_read(power->regmap, AXP20X_USB_OTG_STATUS, &v); |
| 126 | if (ret) |
| 127 | return ret; |
| 128 | |
| 129 | if (!(v & AXP20X_USB_STATUS_VBUS_VALID)) { |
| 130 | val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE; |
| 131 | break; |
| 132 | } |
| 133 | |
| 134 | val->intval = POWER_SUPPLY_HEALTH_GOOD; |
| 135 | break; |
| 136 | case POWER_SUPPLY_PROP_PRESENT: |
| 137 | val->intval = !!(input & AXP20X_PWR_STATUS_VBUS_PRESENT); |
| 138 | break; |
| 139 | case POWER_SUPPLY_PROP_ONLINE: |
| 140 | val->intval = !!(input & AXP20X_PWR_STATUS_VBUS_USED); |
| 141 | break; |
| 142 | default: |
| 143 | return -EINVAL; |
| 144 | } |
| 145 | |
| 146 | return 0; |
| 147 | } |
| 148 | |
| 149 | static enum power_supply_property axp20x_usb_power_properties[] = { |
| 150 | POWER_SUPPLY_PROP_HEALTH, |
| 151 | POWER_SUPPLY_PROP_PRESENT, |
| 152 | POWER_SUPPLY_PROP_ONLINE, |
| 153 | POWER_SUPPLY_PROP_VOLTAGE_MIN, |
| 154 | POWER_SUPPLY_PROP_VOLTAGE_NOW, |
| 155 | POWER_SUPPLY_PROP_CURRENT_MAX, |
| 156 | POWER_SUPPLY_PROP_CURRENT_NOW, |
| 157 | }; |
| 158 | |
| 159 | static const struct power_supply_desc axp20x_usb_power_desc = { |
| 160 | .name = "axp20x-usb", |
| 161 | .type = POWER_SUPPLY_TYPE_USB, |
| 162 | .properties = axp20x_usb_power_properties, |
| 163 | .num_properties = ARRAY_SIZE(axp20x_usb_power_properties), |
| 164 | .get_property = axp20x_usb_power_get_property, |
| 165 | }; |
| 166 | |
| 167 | static int axp20x_usb_power_probe(struct platform_device *pdev) |
| 168 | { |
| 169 | struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent); |
| 170 | struct power_supply_config psy_cfg = {}; |
| 171 | struct axp20x_usb_power *power; |
| 172 | static const char * const irq_names[] = { "VBUS_PLUGIN", |
| 173 | "VBUS_REMOVAL", "VBUS_VALID", "VBUS_NOT_VALID" }; |
| 174 | int i, irq, ret; |
| 175 | |
| 176 | if (!of_device_is_available(pdev->dev.of_node)) |
| 177 | return -ENODEV; |
| 178 | |
| 179 | if (!axp20x) { |
| 180 | dev_err(&pdev->dev, "Parent drvdata not set\n"); |
| 181 | return -EINVAL; |
| 182 | } |
| 183 | |
| 184 | power = devm_kzalloc(&pdev->dev, sizeof(*power), GFP_KERNEL); |
| 185 | if (!power) |
| 186 | return -ENOMEM; |
| 187 | |
| 188 | power->regmap = axp20x->regmap; |
| 189 | |
| 190 | /* Enable vbus valid checking */ |
| 191 | ret = regmap_update_bits(power->regmap, AXP20X_VBUS_MON, |
| 192 | AXP20X_VBUS_MON_VBUS_VALID, AXP20X_VBUS_MON_VBUS_VALID); |
| 193 | if (ret) |
| 194 | return ret; |
| 195 | |
| 196 | /* Enable vbus voltage and current measurement */ |
| 197 | ret = regmap_update_bits(power->regmap, AXP20X_ADC_EN1, |
| 198 | AXP20X_ADC_EN1_VBUS_CURR | AXP20X_ADC_EN1_VBUS_VOLT, |
| 199 | AXP20X_ADC_EN1_VBUS_CURR | AXP20X_ADC_EN1_VBUS_VOLT); |
| 200 | if (ret) |
| 201 | return ret; |
| 202 | |
| 203 | psy_cfg.of_node = pdev->dev.of_node; |
| 204 | psy_cfg.drv_data = power; |
| 205 | |
| 206 | power->supply = devm_power_supply_register(&pdev->dev, |
| 207 | &axp20x_usb_power_desc, &psy_cfg); |
| 208 | if (IS_ERR(power->supply)) |
| 209 | return PTR_ERR(power->supply); |
| 210 | |
| 211 | /* Request irqs after registering, as irqs may trigger immediately */ |
| 212 | for (i = 0; i < ARRAY_SIZE(irq_names); i++) { |
| 213 | irq = platform_get_irq_byname(pdev, irq_names[i]); |
| 214 | if (irq < 0) { |
| 215 | dev_warn(&pdev->dev, "No IRQ for %s: %d\n", |
| 216 | irq_names[i], irq); |
| 217 | continue; |
| 218 | } |
| 219 | irq = regmap_irq_get_virq(axp20x->regmap_irqc, irq); |
| 220 | ret = devm_request_any_context_irq(&pdev->dev, irq, |
| 221 | axp20x_usb_power_irq, 0, DRVNAME, power); |
| 222 | if (ret < 0) |
| 223 | dev_warn(&pdev->dev, "Error requesting %s IRQ: %d\n", |
| 224 | irq_names[i], ret); |
| 225 | } |
| 226 | |
| 227 | return 0; |
| 228 | } |
| 229 | |
| 230 | static const struct of_device_id axp20x_usb_power_match[] = { |
| 231 | { .compatible = "x-powers,axp202-usb-power-supply" }, |
| 232 | { } |
| 233 | }; |
| 234 | MODULE_DEVICE_TABLE(of, axp20x_usb_power_match); |
| 235 | |
| 236 | static struct platform_driver axp20x_usb_power_driver = { |
| 237 | .probe = axp20x_usb_power_probe, |
| 238 | .driver = { |
| 239 | .name = DRVNAME, |
| 240 | .of_match_table = axp20x_usb_power_match, |
| 241 | }, |
| 242 | }; |
| 243 | |
| 244 | module_platform_driver(axp20x_usb_power_driver); |
| 245 | |
| 246 | MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>"); |
| 247 | MODULE_DESCRIPTION("AXP20x PMIC USB power supply status driver"); |
| 248 | MODULE_LICENSE("GPL"); |