Jaewon Kim | 9dfffb7 | 2015-02-05 15:35:58 +0900 | [diff] [blame] | 1 | /* |
| 2 | * max77843.c - Regulator driver for the Maxim MAX77843 |
| 3 | * |
| 4 | * Copyright (C) 2015 Samsung Electronics |
| 5 | * Author: Jaewon Kim <jaewon02.kim@samsung.com> |
| 6 | * Author: Beomho Seo <beomho.seo@samsung.com> |
| 7 | * |
| 8 | * This program is free software; you can redistribute it and/or modify |
| 9 | * it under the terms of the GNU General Public License as published by |
| 10 | * the Free Software Foundation; either version 2 of the License, or |
| 11 | * (at your option) any later version. |
| 12 | */ |
| 13 | |
| 14 | #include <linux/module.h> |
| 15 | #include <linux/platform_device.h> |
| 16 | #include <linux/regulator/driver.h> |
| 17 | #include <linux/regulator/machine.h> |
| 18 | #include <linux/mfd/max77843-private.h> |
| 19 | #include <linux/regulator/of_regulator.h> |
| 20 | |
| 21 | enum max77843_regulator_type { |
| 22 | MAX77843_SAFEOUT1 = 0, |
| 23 | MAX77843_SAFEOUT2, |
| 24 | MAX77843_CHARGER, |
| 25 | |
| 26 | MAX77843_NUM, |
| 27 | }; |
| 28 | |
| 29 | static const unsigned int max77843_safeout_voltage_table[] = { |
| 30 | 4850000, |
| 31 | 4900000, |
| 32 | 4950000, |
| 33 | 3300000, |
| 34 | }; |
| 35 | |
Jaewon Kim | 9dfffb7 | 2015-02-05 15:35:58 +0900 | [diff] [blame] | 36 | static int max77843_reg_get_current_limit(struct regulator_dev *rdev) |
| 37 | { |
| 38 | struct regmap *regmap = rdev->regmap; |
| 39 | unsigned int chg_min_uA = rdev->constraints->min_uA; |
| 40 | unsigned int chg_max_uA = rdev->constraints->max_uA; |
| 41 | unsigned int val; |
| 42 | int ret; |
| 43 | unsigned int reg, sel; |
| 44 | |
| 45 | ret = regmap_read(regmap, MAX77843_CHG_REG_CHG_CNFG_02, ®); |
| 46 | if (ret) { |
| 47 | dev_err(&rdev->dev, "Failed to read charger register\n"); |
| 48 | return ret; |
| 49 | } |
| 50 | |
| 51 | sel = reg & MAX77843_CHG_FAST_CHG_CURRENT_MASK; |
| 52 | |
| 53 | if (sel < 0x03) |
| 54 | sel = 0; |
| 55 | else |
| 56 | sel -= 2; |
| 57 | |
| 58 | val = chg_min_uA + MAX77843_CHG_FAST_CHG_CURRENT_STEP * sel; |
| 59 | if (val > chg_max_uA) |
| 60 | return -EINVAL; |
| 61 | |
| 62 | return val; |
| 63 | } |
| 64 | |
| 65 | static int max77843_reg_set_current_limit(struct regulator_dev *rdev, |
| 66 | int min_uA, int max_uA) |
| 67 | { |
| 68 | struct regmap *regmap = rdev->regmap; |
| 69 | unsigned int chg_min_uA = rdev->constraints->min_uA; |
| 70 | int sel = 0; |
| 71 | |
| 72 | while (chg_min_uA + MAX77843_CHG_FAST_CHG_CURRENT_STEP * sel < min_uA) |
| 73 | sel++; |
| 74 | |
| 75 | if (chg_min_uA + MAX77843_CHG_FAST_CHG_CURRENT_STEP * sel > max_uA) |
| 76 | return -EINVAL; |
| 77 | |
| 78 | sel += 2; |
| 79 | |
| 80 | return regmap_write(regmap, MAX77843_CHG_REG_CHG_CNFG_02, sel); |
| 81 | } |
| 82 | |
| 83 | static struct regulator_ops max77843_charger_ops = { |
Axel Lin | 6986f44 | 2015-05-01 14:17:21 +0800 | [diff] [blame] | 84 | .is_enabled = regulator_is_enabled_regmap, |
Jaewon Kim | 9dfffb7 | 2015-02-05 15:35:58 +0900 | [diff] [blame] | 85 | .enable = regulator_enable_regmap, |
| 86 | .disable = regulator_disable_regmap, |
| 87 | .get_current_limit = max77843_reg_get_current_limit, |
| 88 | .set_current_limit = max77843_reg_set_current_limit, |
| 89 | }; |
| 90 | |
| 91 | static struct regulator_ops max77843_regulator_ops = { |
| 92 | .is_enabled = regulator_is_enabled_regmap, |
| 93 | .enable = regulator_enable_regmap, |
| 94 | .disable = regulator_disable_regmap, |
| 95 | .list_voltage = regulator_list_voltage_table, |
| 96 | .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| 97 | .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| 98 | }; |
| 99 | |
Krzysztof Kozlowski | ec03c08 | 2015-04-18 20:27:18 +0900 | [diff] [blame] | 100 | #define MAX77843_SAFEOUT(num) { \ |
| 101 | .name = "SAFEOUT" # num, \ |
| 102 | .id = MAX77843_SAFEOUT ## num, \ |
| 103 | .ops = &max77843_regulator_ops, \ |
| 104 | .of_match = of_match_ptr("SAFEOUT" # num), \ |
| 105 | .regulators_node = of_match_ptr("regulators"), \ |
| 106 | .type = REGULATOR_VOLTAGE, \ |
| 107 | .owner = THIS_MODULE, \ |
| 108 | .n_voltages = ARRAY_SIZE(max77843_safeout_voltage_table), \ |
| 109 | .volt_table = max77843_safeout_voltage_table, \ |
| 110 | .enable_reg = MAX77843_SYS_REG_SAFEOUTCTRL, \ |
| 111 | .enable_mask = MAX77843_REG_SAFEOUTCTRL_ENSAFEOUT ## num, \ |
| 112 | .vsel_reg = MAX77843_SYS_REG_SAFEOUTCTRL, \ |
| 113 | .vsel_mask = MAX77843_REG_SAFEOUTCTRL_SAFEOUT ## num ## _MASK, \ |
| 114 | } |
| 115 | |
Jaewon Kim | 9dfffb7 | 2015-02-05 15:35:58 +0900 | [diff] [blame] | 116 | static const struct regulator_desc max77843_supported_regulators[] = { |
Krzysztof Kozlowski | ec03c08 | 2015-04-18 20:27:18 +0900 | [diff] [blame] | 117 | [MAX77843_SAFEOUT1] = MAX77843_SAFEOUT(1), |
| 118 | [MAX77843_SAFEOUT2] = MAX77843_SAFEOUT(2), |
Jaewon Kim | 9dfffb7 | 2015-02-05 15:35:58 +0900 | [diff] [blame] | 119 | [MAX77843_CHARGER] = { |
| 120 | .name = "CHARGER", |
| 121 | .id = MAX77843_CHARGER, |
| 122 | .ops = &max77843_charger_ops, |
| 123 | .of_match = of_match_ptr("CHARGER"), |
| 124 | .regulators_node = of_match_ptr("regulators"), |
| 125 | .type = REGULATOR_CURRENT, |
| 126 | .owner = THIS_MODULE, |
| 127 | .enable_reg = MAX77843_CHG_REG_CHG_CNFG_00, |
Axel Lin | b7c960d | 2015-05-01 14:16:39 +0800 | [diff] [blame] | 128 | .enable_mask = MAX77843_CHG_MASK | MAX77843_CHG_BUCK_MASK, |
Axel Lin | 6986f44 | 2015-05-01 14:17:21 +0800 | [diff] [blame] | 129 | .enable_val = MAX77843_CHG_MASK | MAX77843_CHG_BUCK_MASK, |
Jaewon Kim | 9dfffb7 | 2015-02-05 15:35:58 +0900 | [diff] [blame] | 130 | }, |
| 131 | }; |
| 132 | |
| 133 | static struct regmap *max77843_get_regmap(struct max77843 *max77843, int reg_id) |
| 134 | { |
| 135 | switch (reg_id) { |
| 136 | case MAX77843_SAFEOUT1: |
| 137 | case MAX77843_SAFEOUT2: |
| 138 | return max77843->regmap; |
| 139 | case MAX77843_CHARGER: |
| 140 | return max77843->regmap_chg; |
| 141 | default: |
| 142 | return max77843->regmap; |
| 143 | } |
| 144 | } |
| 145 | |
| 146 | static int max77843_regulator_probe(struct platform_device *pdev) |
| 147 | { |
| 148 | struct max77843 *max77843 = dev_get_drvdata(pdev->dev.parent); |
| 149 | struct regulator_config config = {}; |
| 150 | int i; |
| 151 | |
| 152 | config.dev = max77843->dev; |
| 153 | config.driver_data = max77843; |
| 154 | |
| 155 | for (i = 0; i < ARRAY_SIZE(max77843_supported_regulators); i++) { |
| 156 | struct regulator_dev *regulator; |
| 157 | |
| 158 | config.regmap = max77843_get_regmap(max77843, |
| 159 | max77843_supported_regulators[i].id); |
| 160 | |
| 161 | regulator = devm_regulator_register(&pdev->dev, |
| 162 | &max77843_supported_regulators[i], &config); |
| 163 | if (IS_ERR(regulator)) { |
| 164 | dev_err(&pdev->dev, |
| 165 | "Failed to regiser regulator-%d\n", i); |
| 166 | return PTR_ERR(regulator); |
| 167 | } |
| 168 | } |
| 169 | |
| 170 | return 0; |
| 171 | } |
| 172 | |
| 173 | static const struct platform_device_id max77843_regulator_id[] = { |
| 174 | { "max77843-regulator", }, |
| 175 | { /* sentinel */ }, |
| 176 | }; |
| 177 | |
| 178 | static struct platform_driver max77843_regulator_driver = { |
| 179 | .driver = { |
| 180 | .name = "max77843-regulator", |
| 181 | }, |
| 182 | .probe = max77843_regulator_probe, |
| 183 | .id_table = max77843_regulator_id, |
| 184 | }; |
| 185 | |
| 186 | static int __init max77843_regulator_init(void) |
| 187 | { |
| 188 | return platform_driver_register(&max77843_regulator_driver); |
| 189 | } |
| 190 | subsys_initcall(max77843_regulator_init); |
| 191 | |
| 192 | static void __exit max77843_regulator_exit(void) |
| 193 | { |
| 194 | platform_driver_unregister(&max77843_regulator_driver); |
| 195 | } |
| 196 | module_exit(max77843_regulator_exit); |
| 197 | |
| 198 | MODULE_AUTHOR("Jaewon Kim <jaewon02.kim@samsung.com>"); |
| 199 | MODULE_AUTHOR("Beomho Seo <beomho.seo@samsung.com>"); |
| 200 | MODULE_DESCRIPTION("Maxim MAX77843 regulator driver"); |
| 201 | MODULE_LICENSE("GPL"); |